집적 회로

하위 카테고리

📁 ADC/DAC 2519 제품 📁 증폭기 IC 797 제품 📁 오디오 코덱 16 제품 📁 오디오 IC 2 제품 📁 클록 및 타이밍 308 제품 📁 DSP 963 제품 📁 데이터 수집 IC 2 제품 📁 디지털 포텐셔미터 4 제품 📁 디스플레이 드라이버 및 컨트롤러 1 제품 📁 FPGA & CPLD 6666 제품 📁 인터페이스 IC 1593 제품 📁 LED 드라이버 1 제품 📁 로직 IC 305 제품 📁 메모리 IC 875 제품 📁 마이크로컨트롤러 18747 제품 📁 마이크로프로세서 4 제품 📁 모터 드라이버 1 제품 📁 기타 1 제품 📁 Sensor and Detector Interfaces 1 제품 📁 특수 IC 15 제품 📁 비디오 IC 13 제품

제품 (32836)

PIC24FJ32GA104-I/ML - 16-Bit 32KB Flash MCU, 44-QFN | Microchip
PIC24FJ32GA104-I/ML

PIC24FJ32GA104-I/ML - 16-Bit 32KB Flash MCU, 44-QFN | Microchip

The Microchip PIC24FJ32GA104-I/ML is a 16-bit PIC24F microcontroller featuring 32 KB of Flash program memory (11K x 24 words), 8 KB RAM, and a maximum CPU speed of 32 MHz (16 MIPS), housed in a 44-pin QFN package (8x8 mm) with an exposed thermal pad. It belongs to the PIC24FJ64GA104 family and carries the nanoWatt XLP (eXtreme Low Power) branding for ultra-low-power applications. A 16-bit microcontroller (MCU) is a single-chip computer with a 16-bit data path, instruction word, and ALU, sitting in the hierarchy: microcontroller -> embedded controller -> semiconductor. The PIC24F family uses a Modified Harvard architecture with 16-bit instructions and 24-bit instruction words, optimized for C compiler efficiency and signal processing. This positions it between 8-bit MCUs (PIC16, AVR) and 32-bit MCUs (PIC32, ARM Cortex-M), offering a balance of compute throughput, peripheral integration, and low power consumption. Key features include up to 16 MIPS performance, single-cycle execution, 16 x 16 hardware multiply, 32-bit / 16-bit hardware divider, a C-compiler-optimized instruction set, and the nanoWatt XLP sleep modes that allow standby currents in the microamp range. The 44-QFN package integrates peripherals such as multiple UART/SPI/I2C interfaces, 12-bit ADC, real-time clock, and up to 33 digital I/O pins. Typical applications include portable medical devices, low-power IoT sensor nodes, industrial control with LCD display, battery-powered data loggers, and consumer products requiring extended battery life. The wide 2.0V to 3.6V operating range supports direct Li-ion battery connection with on-chip regulation. When designing with this part, allocate PCB thermal relief to the exposed pad (EP) on the 44-QFN for proper ground connectivity and heat dissipation. Use Microchip's MPLAB X IDE with the XC16 compiler and consider the Explorer 16/32 development board for prototyping with compatible Processor Plug-In Modules. This page synthesizes distributor pricing, MPLAB tool compatibility, drop-in alternative PIC24FJ parts, and practical PCB layout notes not found in the standalone datasheet.

견적 요청 문의하기
PIC24FJ32GA104-I/PT - 32KB Flash 16-bit MCU | Microchip TQFP-44
PIC24FJ32GA104-I/PT

PIC24FJ32GA104-I/PT - 32KB Flash 16-bit MCU | Microchip TQFP-44

The Microchip Technology PIC24FJ32GA104-I/PT is a 16-bit general-purpose Flash microcontroller built on the nanoWatt XLP (eXtreme Low Power) PIC24F core, delivering up to 16 MIPS at 32 MHz with 32 KB of Flash program memory (11K x 24 words) and 8 KB of SRAM, housed in a 44-pin TQFP (10x10 mm) package rated for the -40C to +85C industrial range. A PIC24F microcontroller is a 16-bit modified-Harvard RISC MCU that bridges 8-bit PIC simplicity with dsPIC/DSP-class performance. In the broader taxonomy it sits at: MCU -> 16-bit microcontroller -> embedded controller -> digital IC. PIC24F devices are characterized by nanoWatt XLP sleep modes (sub-microamp idle current), rich peripheral integration, and Microchip's free MPLAB X IDE plus the XC16 toolchain, making them a popular choice for battery-powered and cost-sensitive embedded designs. Key features include a 16 x 16 hardware multiplier and 32 / 16 hardware divider with single-cycle execution, a 10-bit ADC with up to 13 input channels (depending on package variant), two analog comparators, four 16-bit timers, two UART, two SPI, and two I2C peripherals. The wide 2.0 V to 3.6 V operating range plus nanoWatt XLP idle/sleep currents below 1 uA make the part suitable for always-on sensor nodes and energy-harvesting applications. The architecture uses a 24-bit instruction word with separate 16-bit data paths, allowing single-cycle atomic reads and writes to 16-bit peripherals. A configurable 8 MHz internal FRC oscillator eliminates the need for an external crystal on cost-optimized boards, while PLL multiplication can step the system clock up to 32 MHz. The CTMU peripheral enables capacitive-touch sensing, time-of-flight measurement, and precision pulse generation without external analog ICs. Typical applications include handheld consumer devices such as blood-pressure monitors, glucose meters, and remote controls, portable data loggers, smart sensors with on-chip capacitive touch, low-cost motor-control front ends, and industrial HMI panels. The combination of large memory, RTCC, USB-less general-purpose peripherals, and a 35-I/O count makes the device flexible for both stand-alone and master/slave architectures. When designing with this device, dedicate 100 nF decoupling on each VDD/VCAP pin pair and follow the datasheet's PCB layout guideline for the analog AVDD/AVSS rails to preserve ADC accuracy. Avoid using ADC channels shared with digital I/O during simultaneous switching events without proper isolation. This page synthesizes distributor pricing, in-package drop-in alternatives, and practical design notes that go beyond the manufacturer datasheet. All specifications are anchored to the official Microchip datasheet (PIC24FJ64GA104 Family) and cross-verified with current distributor listings as of 2026-10-09.

견적 요청 문의하기
PIC24FJ32GA104T-I/ML - 16-bit 32KB Flash MCU | Microchip
PIC24FJ32GA104T-I/ML

PIC24FJ32GA104T-I/ML - 16-bit 32KB Flash MCU | Microchip

The Microchip Technology PIC24FJ32GA104T-I/ML is a 16-bit microcontroller from the PIC® XLP™ 24F family featuring 32KB Flash program memory and 8KB RAM, operating at up to 32 MHz (16 MIPS) in a 44-pin QFN (8x8 mm) package with exposed pad. It integrates a nanoWatt XLP power-management architecture designed for ultra-low-power applications requiring extended battery life. A 16-bit microcontroller (MCU) is a microprocessor that processes data and instructions 16 bits at a time, sitting between 8-bit MCUs and 32-bit MCUs in the embedded hierarchy. 16-bit -> microcontroller -> embedded processor -> semiconductor. The PIC24FJ family specifically targets low-power, mixed-signal applications where 8-bit MCUs lack the throughput but 32-bit MCUs over-consume power, making PIC24F parts a sweet spot for portable medical, sensor, and human-interface designs. Key features include 32 KB Flash (11K x 24 organization), 8 KB SRAM, hardware 16x16 multiply and 32/16 divide in single-cycle execution, and a C-compiler-optimized instruction set. Peripherals span up to 5 timers, 3 UART, 3 SPI, 2 I2C, 10-bit ADC up to 500 ksps with up to 13 input channels, and a Real-Time Clock Calendar (RTCC). The nanoWatt XLP modes offer deep sleep currents below 1 µA (per datasheet characterization), enabling years of operation from coin-cell or lithium batteries. Architecturally, the device uses a modified Harvard bus with separate program and data paths, supporting linear program memory up to 32 KB and linear data memory up to 8 KB. Five I/O ports (RA/RB/RC/RD/RG) provide up to 35 digital I/O pins with individual bit-manipulation control via Peripheral Pin Select (PPS). The 2.5V-3.6V single-supply range and -40°C to +85°C industrial temperature support enable deployment in consumer, industrial, and portable medical end products. Typical applications include handheld medical instruments (glucometers, pulse oximeters), IoT sensor nodes, home automation controllers, HVAC thermostats, and consumer electronics with graphical LCD or capacitive touch interfaces. The PIC24FJ32GA104 family also serves as a low-power companion MCU in multi-processor designs where a higher-performance host offloads always-on sensor and housekeeping tasks. When designing with this MCU, allocate the PPS mapping carefully because each peripheral signal can be routed to one of several pins; conflicts between UART, SPI, and I2C assignments must be resolved at compile time. The QFN-44 package benefits from a central thermal pad that should be soldered to a ground pour for both electrical ground and thermal dissipation. This page synthesizes distributor pricing, drop-in same-package alternatives from the PIC24FJ family, and practical design notes that complement - but do not replace - the manufacturer datasheet.

견적 요청 문의하기
PIC24FJ32GB002-I/SP - 32KB Flash USB MCU 28-SPDIP | Microchip
PIC24FJ32GB002-I/SP

PIC24FJ32GB002-I/SP - 32KB Flash USB MCU 28-SPDIP | Microchip

The Microchip PIC24FJ32GB002-I/SP is a 16-bit PIC microcontroller from the PIC24F XLP family, integrating Full-Speed USB 2.0 on-chip with 32 KB of Flash program memory and 8 KB of RAM, housed in a 28-pin SPDIP (SP) through-hole package. It runs at up to 32 MHz (16 MIPS) from a 2.0-3.5V supply, making it one of the lowest-power USB-capable 16-bit MCUs in the Microchip portfolio. The part suffix /SP designates the 28-SPDIP industrial temperature range (-40C to +85C). A microcontroller (MCU) is a single-chip computer containing a CPU core, program and data memory, and integrated peripherals. The PIC24F family sits in the 16-bit tier of Microchip's product hierarchy: 8-bit PIC10/12/16 -> 16-bit PIC24F/dsPIC -> 32-bit PIC32. Within PIC24F, the 'J' family is the ultra-low-power XLP variant while 'GB' indicates Full-Speed USB 2.0 device support - a unique combination for battery-powered USB peripherals. Key features include 32 KB self-programmable Flash (11K x 24 words), 8 KB RAM, a 10-bit ADC up to 500 ksps with up to 9 analog channels, three 16-bit timers, two UART modules, two SPI modules, two I2C modules, and a CTMU for capacitive touch sensing. The integrated USB 2.0 Full-Speed (12 Mbps) device controller with an internal transceiver eliminates external USB PHY components, lowering BOM cost for HID, CDC, and custom-class USB devices. The architecture uses a Harvard RISC core with 16-bit instructions and a modified Harvard memory map, achieving 16 MIPS throughput. The nanoWatt XLP technology delivers sleep currents below 50 nA typical, and the part supports multiple low-power modes (Sleep, Idle, Deep Sleep) with multiple clock sources including the on-chip 8 MHz FRC and the 31 kHz LPRC oscillator. Typical applications include USB Human Interface Devices (HIDs) such as keyboards and mice, USB-to-UART bridges, USB data loggers, battery-powered USB medical sensors, and capacitive touch user interfaces. The 28-SPDIP package is favored for hobby, educational, and through-hole prototyping designs where socketed or hand-soldered replacement is desired. When designing with this part, ensure the USB VBUS pin is properly decoupled and that the internal 3.3V regulator is bypassed per datasheet. The 28-SPDIP form factor requires through-hole pads - for SMD designs the SOIC-28 or QFN variants of the same die are available in the family. The integrated USB transceiver reduces code complexity but the firmware stack (Microchip Harmony or MLA) should still be used for enumeration.

견적 요청 문의하기
PIC24FJ32GB002-I/SS - 16-bit 32MHz 32KB Flash USB MCU | Microchip
PIC24FJ32GB002-I/SS

PIC24FJ32GB002-I/SS - 16-bit 32MHz 32KB Flash USB MCU | Microchip

The Microchip Technology PIC24FJ32GB002-I/SS is a 16-bit PIC® XLP™ 24F microcontroller IC running at up to 32MHz (16 MIPS), integrating 32KB (11K x 24) of Flash program memory, 8KB of RAM, and a Full-Speed USB 2.0 On-The-Go (OTG) transceiver, packaged in a 28-pin SSOP (5.30mm width, 0.209in). According to the Microchip product page, this device belongs to the PIC24FJ64GB004 family and targets low-power, USB-enabled embedded applications. A 16-bit microcontroller (MCU) is a programmable processor with a 16-bit data path, balanced register width, and richer peripherals than 8-bit MCUs while remaining simpler and lower-cost than 32-bit ARM Cortex parts. Within Microchip's taxonomy, the PIC24F sits between PIC16/PIC18 8-bit parts and dsPIC/PIC32 32-bit parts, offering deterministic interrupt handling and DSP-friendly instructions for embedded signal processing. The 'FJ' prefix denotes the nanoWatt XLP extreme-low-power family, while the 'GB002' suffix marks this specific die with USB OTG and 32KB Flash. This product type falls under the hypernym hierarchy: microcontroller -> MCU -> embedded processor -> semiconductor IC. Key differentiating features include the integrated USB 2.0 Full-Speed OTG controller, nanoWatt XLP technology for sub-µA sleep currents, 16-channel 10-bit ADC, multiple serial interfaces (UART, SPI, I2C), and a real-time clock-calendar (RTCC). The 28-pin SSOP package provides compact surface-mount integration while exposing enough I/O for human-interface and sensor-hub designs. Architecturally, the PIC24FJ32GB002 uses a modified Harvard architecture with separate program and data buses, enabling single-cycle instruction fetch plus data access. The 16-bit core delivers 16 MIPS at 32 MHz, and the integrated USB PHY eliminates external transceiver components, reducing BOM cost. The CTMU peripheral supports touch sensing and capacitive measurement without an external analog front-end. Typical applications include USB peripherals (HID, CDC, MSD class devices), battery-powered data loggers with USB charging, portable medical monitors, consumer-electronics human-interface devices, and low-power sensor hubs requiring USB connectivity. The combination of USB OTG and nanoWatt XLP makes the part especially attractive for self-powered USB devices that must idle in deep sleep and wake on USB attach. When designing with this part, observe Microchip's VDD/VSS pinout rules (all VSS and VDD pins must be connected for proper programming), place the USB DP/DN traces as a 90-ohm differential pair, and provide a stable 3.3V rail (the device supports 2.0V-3.6V operation). The DISVREG pin must be properly tied off per the datasheet alternative-connection table when the internal voltage regulator is bypassed. This page consolidates distributor pricing, drop-in same-package alternatives, and practical design guidance that go beyond the manufacturer datasheet, helping engineers select and qualify the PIC24FJ32GB002-I/SS for production designs.

견적 요청 문의하기
PIC24FJ32GB002T-I/SS - 16-bit 32KB Flash MCU w/USB OTG | Microchip
PIC24FJ32GB002T-I/SS

PIC24FJ32GB002T-I/SS - 16-bit 32KB Flash MCU w/USB OTG | Microchip

The Microchip Technology PIC24FJ32GB002T-I/SS is a 16-bit microcontroller from the PIC® XLP™ 24F family, featuring a 32 MHz core, 32 KB of Flash program memory (organized 11K x 24), and 8 KB of RAM in a 28-pin SSOP package. It integrates a USB 2.0 full-speed On-The-Go (OTG) controller alongside traditional serial peripherals (I²C, IrDA, SPI, UART/USART), and exposes 19 general-purpose I/O pins. A 16-bit microcontroller (MCU) is a class of embedded computing device that processes instructions on 16-bit-wide data paths, delivering a strong balance between 8-bit simplicity and 32-bit performance. Within the broader taxonomy, a 16-bit MCU sits inside the microcontroller hierarchy -> microcontroller -> embedded processor -> semiconductor device. The PIC24FJ family specifically emphasizes eXtreme Low Power (XLP) operation, positioning it for battery-powered applications where nanoWatt sleep currents and active-mode efficiency directly extend operating life. Key differentiating features of the PIC24FJ32GB002T-I/SS include its integrated USB OTG peripheral, the XLP nanoWatt technology sleep manager, and the 16 MIPS performance at 32 MHz (when operating at 3.3 V). The device provides 32 KB of self-programmable Flash and 8 KB of RAM, plus multiple 16-bit timers and configurable I/O. Compared to the non-USB PIC24FJ32GA002 sibling, the GB002's USB OTG controller makes it purpose-built for embedded USB-device and USB-host applications. From an architectural perspective, the part uses a modified Harvard RISC core with a 16-bit instruction word, supporting C-optimized code generation through Microchip's MPLAB XC16 compiler. Peripheral DMA, parallel master port, and on-chip temperature sensor round out the integration level. The internal 8 MHz FRC oscillator with PLL allows flexible system clocking without external crystals in many designs. Typical applications include USB HID peripherals such as custom keyboards, mice, and game controllers; embedded data-logging with USB mass-storage interfaces; low-power sensor hubs; and human-interface devices on consumer and industrial equipment. The USB OTG capability also makes the part suitable for point-of-sale terminals and portable medical instruments that must communicate directly with tablets or host PCs. A key design consideration when using this device is that the USB PHY requires a precise 48 MHz clock derived from the system oscillator; designers must configure the PLL correctly and respect the VUSB 3.3 V regulator pin. The DISVREG (disable-voltage-regulator) pin must be properly tied to ensure stable operation across all temperature and load conditions. This page consolidates distributor pricing, drop-in alternatives, and applied design notes not found in the manufacturer datasheet alone, helping engineers source and integrate the PIC24FJ32GB002T-I/SS with confidence.

견적 요청 문의하기
PIC24FJ32GB004-I/PT - 16-bit 32MHz USB MCU 32KB Flash | Microchip
PIC24FJ32GB004-I/PT

PIC24FJ32GB004-I/PT - 16-bit 32MHz USB MCU 32KB Flash | Microchip

The Microchip Technology PIC24FJ32GB004-I/PT is a 16-bit RISC microcontroller from the PIC24F family with integrated Full-Speed USB, 32 KB of Flash program memory, and 8 KB of RAM, housed in a 44-pin TQFP (10x10 mm) package. It operates at up to 32 MHz (16 MIPS) and supports 2.0V to 3.6V core and I/O supply, making it a member of Microchip's nanoWatt XLP extreme-low-power family. A microcontroller (MCU) is a single-chip computer that integrates a CPU, program memory (Flash), data memory (RAM), and a rich set of peripherals (timers, communication interfaces, ADC, I/O ports). PIC24F devices use a 16-bit modified Harvard architecture with single-cycle instruction execution and a 16 x 16 hardware multiplier, occupying the mid-tier of Microchip's 8-bit/16-bit/32-bit microcontroller hierarchy (PIC10/12/16 -> PIC24F/dsPIC -> PIC32). The 'FJ' suffix denotes the Flash-based, low-power variant. Key features include Full-Speed USB 2.0 device support with on-chip transceiver, up to 33 general-purpose I/O pins, a 10-bit ADC with up to 13 input channels, five 16-bit timers (Timer1 plus four Timer2/3/4/5 type modules configurable as pairs), two UART modules, two SPI modules, and two I2C modules. The CTMU (Charge Time Measurement Unit) provides touch sensing and precise time measurement, and the RTCC keeps time in deep sleep modes. The device includes a hardware CRC and a Parallel Master Port on certain package variants. The PIC24FJ32GB004 is built on a CMOS process with nanoWatt XLP technology that delivers sleep currents below 1 uA with RAM retention, suiting battery-powered designs. Its 16-bit core, hardware multiply/divide, and C-optimized instruction set accelerate DSP-style tasks (FIR/IIR filtering, control loops) compared with 8-bit MCUs, while the Full-Speed USB 2.0 integrated transceiver eliminates the external PHY needed by many competing parts, reducing both BOM cost and PCB area in USB peripherals. Typical applications include USB Human Interface Devices (HID) such as keyboards, mice, and game controllers; USB-to-UART bridges; USB data loggers; medical instrumentation with USB connectivity; industrial USB sensor nodes; consumer electronics with USB charging/communication; and low-power IoT edge devices that require sporadic USB-driven updates. The wide 2.0V-3.6V supply range supports direct Li-Ion battery operation. When designing with this device, place the 4.7 kohm pull-up on D+ (or D- for low-speed) per the USB specification, add 100 nF decoupling on each VDD pin and a bulk 4.7-10 uF near the regulator, and ensure the VUSB pin sees 3.3V for the on-chip transceiver. Failure to do so is the most common cause of USB enumeration failures.

견적 요청 문의하기
PIC24FJ32GP202-E/MV - 32KB Flash, 16-bit XLP MCU | Microchip
PIC24FJ32GP202-E/MV

PIC24FJ32GP202-E/MV - 32KB Flash, 16-bit XLP MCU | Microchip

The Microchip Technology PIC24FJ32GP202-E/MV is a 16-bit PIC24F microcontroller from the GP2/GU2 family featuring 32KB of ECC Flash, 8KB of RAM, and a 32 MHz (16 MIPS) core, housed in a 28-pin UQFN (4x4 mm) MV package with extended (-40C to +125C) temperature range. It integrates core independent peripherals (CIPs) and a Full Speed USB 2.0 Host/Device/OTG controller, with sleep current measured in the hundreds of nA while retaining the complete RAM and interrupt state. What is a PIC24F microcontroller? The PIC24F is Microchip's 16-bit microcontroller family using a modified Harvard RISC architecture with 16 MIPS performance at 32 MHz. It sits above the 8-bit PIC16/PIC18 families in performance and below the dsPIC/PIC32 families. It is widely used in ultra-low-power (XLP) battery applications, mixed-signal designs, and USB-enabled embedded products where 32-bit performance is overkill but 8-bit MCUs lack the throughput or peripherals. Key features include hardware ECC on Flash for greater data integrity, 4 channels of DMA, up to 22 channels of 10/12-bit ADC at 500 ksps, 5 16-bit timers, configurable logic cells (CLC), and multiple serial interfaces (UART, SPI, I2C). The integrated USB 2.0 FS OTG controller with on-chip transceiver eliminates the need for external PHY chips, significantly shrinking the BOM for low-power USB devices. Architecturally, the PIC24FJ32GP202 uses a 16-bit modified Harvard core with a 24-bit instruction word for compact code density. The CIPs (configurable logic cells, comparators, PWM, RTCC, etc.) operate independently of the CPU, allowing events such as ADC-triggered conversions and PWM-shutdown on comparator faults without CPU wake-up - a key reason the XLP sleep current stays in the nanoamp range. Typical applications include USB HID peripherals, IoT sensor nodes, e-metering, low-power medical wearables, consumer battery chargers, and industrial control with USB diagnostic interfaces. The extended -40C to +125C temperature range (the 'E' suffix) makes it suitable for automotive under-hood and outdoor industrial deployments. When designing, ensure VDD decoupling uses a 100 nF ceramic placed within 2 mm of the VDD pin and a 10 uF bulk on the main rail. The UQFN-28 exposed pad must be soldered to the PCB ground plane for proper thermal dissipation and electrical ground reference - missing this connection causes erratic USB operation. This page synthesizes distributor pricing, drop-in same-family alternatives, and practical design notes not found in the manufacturer datasheet alone, with a focus on USB-enabled low-power embedded applications.

견적 요청 문의하기
PIC24FJ32GP202-I/MV - 32KB Flash, 32MHz 16-bit MCU | Microchip
PIC24FJ32GP202-I/MV

PIC24FJ32GP202-I/MV - 32KB Flash, 32MHz 16-bit MCU | Microchip

The Microchip Technology PIC24FJ32GP202-I/MV is a 16-bit PIC24F microcontroller with 32 KB of ECC Flash program memory, 8 KB of RAM, and a maximum CPU clock of 32 MHz (16 MIPS), housed in a 28-pin UQFN (4x4 mm) package. It is part of the PIC24FJ GP2/GU2 eXtreme Low-Power (XLP) family, integrating Full-Speed USB 2.0 Host/Device/OTG, multiple Core Independent Peripherals (CIPs), two I2C, two SPI, and configurable logic cells (CLC) for hardware state-machine offload. A PIC microcontroller (MCU) is a single-chip computer that combines a CPU, non-volatile program memory (Flash), volatile data memory (RAM), timers, communication peripherals, and analog blocks on one die. The PIC24F series uses a 16-bit modified-Harvard architecture with a rich instruction set tuned for C-compiled embedded code. Within the Microchip taxonomy this part sits at microcontroller -> 16-bit MCU -> PIC24F family -> XLP low-power sub-family, and at the system level it is a member of the broader embedded computing / power-management-aware processing tier that bridges simple 8-bit MCUs and higher-performance 32-bit Cortex-M devices. Key differentiators include on-chip ECC Flash for higher reliability, sub-uA sleep current with full RAM retention, hardware DMA, six timer modules, multiple analog comparators, and integrated USB 2.0 Full-Speed PHY - eliminating the need for an external transceiver. The device operates from 2.0 V to 3.6 V across -40C to +85C industrial temperatures. Typical applications include USB peripherals (HID, CDC, custom class), low-power IoT sensor nodes, battery-powered consumer devices, industrial sensor hubs, and small graphical/audio accessories. The UQFN-28 footprint suits space-constrained handhelds where a 4x4 mm MCU footprint is required. When designing in this part, plan a 3.3 V rail with adequate bulk decoupling near VDD/VSS pairs, assign the USB D+/D- to the dedicated package pins, and use MPLAB X IDE with the XC16 compiler plus Microchip's USB stack for protocol support. This page synthesizes distributor pricing, drop-in alternatives, and practical design notes not found in the manufacturer datasheet alone.

견적 요청 문의하기
PIC24FJ32GP202-I/SS - 16-bit 32MHz 32KB Flash MCU 28-SSOP | Microchip
PIC24FJ32GP202-I/SS

PIC24FJ32GP202-I/SS - 16-bit 32MHz 32KB Flash MCU 28-SSOP | Microchip

The Microchip PIC24FJ32GP202-I/SS is a 16-bit PIC24F microcontroller running at up to 32 MHz (16 MIPS) with 32 KB ECC Flash and 8 KB SRAM, housed in a 28-pin SSOP (5.30 mm) industrial-grade (-40C to +85C) package. The device integrates two I2C, two SPI, two UART peripherals, six timers, two DMA controllers, multiple analog comparators, configurable logic cells (CLC), and a USB 2.0 Full-Speed Host/Device/OTG controller on-chip. An MCU (Microcontroller Unit) is a single-chip computer that integrates a CPU core, program memory (Flash), data memory (RAM), and configurable peripherals. Within the PIC24F family, the 'GP2' sub-family targets general-purpose ultra-low-power designs with embedded USB, while the 'GU2' sub-family adds additional features. PIC24FJ devices sit in Microchip's hierarchy as: 16-bit MCU -> PIC24 -> PIC24F -> eXtreme Low-Power (XLP) family -> power-efficient embedded controllers for sensor, HMI and USB edge-node applications. Key features of this part include ECC Flash for enhanced program-memory reliability, XLP (eXtreme Low-Power) technology with sleep currents down to a few hundred nanoamps while retaining SRAM and peripheral state, an on-chip 32 kHz low-power oscillator, and a 10-bit 1.1 Msps ADC. Five flexible package options (28-pin SSOP/SOIC/QFN, 44-pin QFN/TQFP) allow board-level scaling across product variants. Architecturally, the PIC24FJ32GP202 uses a 16-bit modified Harvard RISC core with hardware multiply/divide, a 24-bit instruction word, and a peripheral pin-select (PPS) system that lets most digital peripherals be remapped to a wide range of I/O pins. This PPS flexibility simplifies PCB routing when several I2C, SPI or UART channels must be distributed across the 28-pin SSOP footprint. Typical applications include USB peripherals (HID, CDC, MSD), portable medical and fitness sensors, low-power wireless sensor nodes, e-metering and home-automation gateways, and battery-powered industrial data loggers. The combination of USB-OTG, ECC Flash and XLP makes the device a frequent choice for edge nodes that must reliably store firmware while spending most of their lifetime in deep sleep. When designing with this MCU, ensure the USB bus pins (D+, D-) are routed as a 90-ohm differential pair, that the VUSB pin is supplied from VDD or the internal USB regulator per the datasheet, and that the Vcap decoupling capacitor follows the recommended value to stabilize the core logic voltage domain. This page synthesizes distributor pricing, same-family drop-in alternatives, and practical design notes that the bare manufacturer datasheet does not compile in one place.

견적 요청 문의하기
PIC24FJ32GP202T-I/ML - 16-bit 32MHz 32KB Flash MCU | Microchip
PIC24FJ32GP202T-I/ML

PIC24FJ32GP202T-I/ML - 16-bit 32MHz 32KB Flash MCU | Microchip

The Microchip Technology PIC24FJ32GP202T-I/ML is a 16-bit PIC24F microcontroller running up to 32 MHz (16 MIPS) with 32 KB of ECC Flash program memory and 8 KB of on-chip SRAM, packaged in a 28-pin QFN (6x6 mm) with industrial -40C to +85C temperature rating. The trailing /ML designator indicates the QFN-28 package while the 'T' suffix denotes tape-and-reel packaging. An MCU (microcontroller unit) is a single-chip processor that integrates a CPU core, program memory (Flash), data memory (SRAM), peripherals (timers, ADC, communication interfaces), and interrupt logic on one die. The PIC24F family sits in Microchip's 16-bit MCU tier between 8-bit PIC16/PIC18 devices and 32-bit PIC32 parts, offering higher performance than 8-bit cores while retaining a modified Harvard architecture with deterministic interrupt response. Within the PIC24F line, the 'GP' sub-family denotes general-purpose parts with USB-OTG peripheral support. Key features include a 16-channel 12-bit ADC with 500 ksps throughput, USB 2.0 full-speed OTG with internal transceiver, three 16-bit timers, two UART/SPI/I2C modules, a 32-bit RTCC, and nanoWatt XLP power-saving modes that drop quiescent current to single-digit microamps for battery applications. The QFN-28 (6x6 mm) footprint enables compact board layouts, and the integrated 32 kHz internal low-power oscillator eliminates an external crystal in many designs. Architecturally, the PIC24FJ32GP202 uses a 16-bit modified-Harvard core with a 24-bit instruction word, hardware multiply/divide in one cycle, and a 16-element working register array. The on-chip voltage regulator derives the core 1.8V from a single 2.0-3.6V rail, simplifying single-supply designs. The USB OTG controller supports both host and device roles and includes an internal 3.3V regulator for the USB transceiver. Typical applications include USB HID peripherals, industrial sensor hubs, low-power IoT edge nodes, battery-powered data loggers, and consumer devices requiring on-board USB connectivity without an external PHY. Industrial control panels use this MCU for its extended temperature range and robust peripheral mix. A key design consideration is to use the recommended 10uF bulk + 0.1uF decoupling pair on VDD/AVDD, route the USB DP/DM traces as a 90-ohm differential pair, and ensure the exposed pad on the QFN-28 is soldered to a ground pour for thermal and electrical performance. This page consolidates distributor pricing, drop-in compatible alternatives, and practical design guidance not found in the manufacturer datasheet alone.

견적 요청 문의하기
PIC24FJ32GP202T-I/MV - 32KB Flash 16-bit MCU, 28-UQFN | Microchip
PIC24FJ32GP202T-I/MV

PIC24FJ32GP202T-I/MV - 32KB Flash 16-bit MCU, 28-UQFN | Microchip

The Microchip PIC24FJ32GP202T-I/MV is a 16-bit PIC24F microcontroller featuring a 32 MHz CPU core, 32 KB of ECC Flash program memory and 8 KB of RAM, housed in a compact 28-pin UQFN (4x4 mm) package supplied on tape and reel. A microcontroller (MCU) is a single-chip computer that integrates a CPU, non-volatile program memory (Flash), volatile data memory (RAM), and a rich set of on-chip peripherals such as timers, ADCs, communication interfaces (UART, SPI, I2C) and general-purpose I/O. The PIC24F family is positioned as Microchip's ultra-low-power (XLP) 16-bit MCU line, bridging the gap between 8-bit PIC16/PIC18 parts and higher-end dsPIC and 32-bit devices. Microcontrollers are the fundamental building blocks of embedded systems and sit within the broader category of microprocessors and microcomputers in the semiconductor hierarchy. Key features of the PIC24FJ32GP202T-I/MV include 16 MIPS (million instructions per second) throughput at 32 MHz, an integrated Real-Time Clock and Calendar (RTCC), a 10-bit ADC with up to 13 channels, multiple 16-bit timers and Capture/Compare/PWM peripherals, and USB 2.0 Full-Speed Host/Device/OTG support on the GP2/GU2 family members. The XLP technology delivers sleep currents in the hundreds of nanoampere range while retaining the full RAM contents and core state, making this part especially well suited to battery-powered and energy-harvesting applications. Architecturally, the PIC24FJ32GP202 uses a 16-bit modified Harvard CPU with a 16 x 16-bit working register array, single-cycle multiply and hardware divide, and a 24-bit instruction word. This yields predictable interrupt latency (5 cycles) and deterministic execution that simplifies real-time firmware design. The on-chip voltage regulator supports operation across 2.0 V to 3.6 V, and the device offers multiple low-power modes (Sleep, Idle, Doze, Deep Sleep) orchestrated by the Power-Saving Modes module. Typical applications include USB peripherals such as HID-class input devices, low-power wireless sensor nodes with USB charging or data uplink, industrial sensor interfaces, portable medical accessories, consumer devices requiring USB connectivity, and low-power IoT edge nodes. The combination of 32 KB ECC Flash and 8 KB RAM is well matched to small USB stacks plus application logic in C using Microchip's MPLAB X IDE and XC16 compiler. When designing with this MCU, pay close attention to the VUSB and VBUS pins, the decoupling of the internal core regulator pin (VCAP), and the unused-pin configuration to minimize current draw in sleep mode. Use the XLP library from MPLAB Harmony or the legacy MLA to take advantage of the deep-sleep modes. Migration to the larger PIC24FJ64GP202 or PIC24FJ64GU402 is pin-compatible within the GP2 family, enabling code reuse and a simple upgrade path.

견적 요청 문의하기
PIC24FJ32GP202T-I/SO - 16-bit 32MHz 32KB Flash MCU w/ USB | Microchip
PIC24FJ32GP202T-I/SO

PIC24FJ32GP202T-I/SO - 16-bit 32MHz 32KB Flash MCU w/ USB | Microchip

The Microchip Technology PIC24FJ32GP202T-I/SO is a 16-bit PIC24F microcontroller featuring a 32MHz CPU core, 32KB of ECC Flash program memory and 8KB of RAM, housed in a 28-pin SOIC package with industrial-grade -40C to +85C operating range. The 'T' suffix indicates tape-and-reel packaging for high-volume assembly lines, and the part integrates Full-Speed USB 2.0 Host/Device/OTG alongside several core-independent peripherals (CIPs) including Real-Time Clock, CRC, and PMP. The supply voltage range is 2.0V to 3.6V with a nominal 3.3V rail typical of the PIC24F XLP (eXtreme Low Power) family, and sleep currents are documented in the low hundreds of nA with full RAM/CPU retention. A microcontroller (MCU) is an integrated circuit that combines a CPU core, program memory (Flash/ROM), data memory (RAM), and a rich set of peripherals (timers, ADC, communication blocks, I/O) on a single die. The 16-bit class sits between 8-bit AVR/PIC-MCU parts and 32-bit ARM Cortex-M devices, offering a balance of code density, deterministic interrupt latency, and richer peripheral integration than 8-bit cores. PIC24F parts in particular target low-power, mixed-signal, USB-equipped embedded designs where 32-bit performance is not required. Key features of the PIC24FJ32GP202T-I/SO include 16 MIPS execution throughput at 32MHz, hardware CT-only encoding (ECC) on Flash for improved reliability in harsh environments, 21 general-purpose I/O pins, an integrated Full-Speed USB transceiver (no external PHY required), a 10/12-bit ADC, multiple Enhanced Compare/PWM modules, and configurable logic cells. The 28-SOIC package suits hand-soldered prototypes and through-hole-style manufacturing flows while still offering all peripheral capability of the larger pin-count siblings. Architecture-wise, the part uses a modified Harvard bus with separate instruction and data paths, a 16-element register file, and CIP blocks that operate independently of the CPU. The XLP technology achieves deep-sleep retention modes drawing only a few hundred nanoamps while preserving RAM and interrupt context, enabling coin-cell or energy-harvesting powered designs. Typical applications include USB HID/CDC peripherals (keyboards, custom sensors, debug probes), low-power IoT sensor nodes, USB battery chargers, and industrial data-loggers. The combination of native USB, ECC Flash, and XLP sleep modes makes this part well-suited to connected battery-powered devices that must wake, transmit, and sleep efficiently. When designing with this MCU, allocate careful PCB real-estate around the USB DP/DM lines (matched 90 ohm differential, common-mode choke if EMI is a concern), and ensure the 3.3V LDO can source the USB inrush current during hot-plug events. Decoupling should include a 100nF ceramic on every VDD pin plus a bulk 4.7uF near the package. This page synthesizes distributor pricing, drop-in PIC24F alternatives, and practical low-power design notes not found in the manufacturer datasheet alone.

견적 요청 문의하기
PIC24FJ32GP202T-I/SS - 16-bit 32MHz 32KB Flash MCU | Microchip
PIC24FJ32GP202T-I/SS

PIC24FJ32GP202T-I/SS - 16-bit 32MHz 32KB Flash MCU | Microchip

The Microchip PIC24FJ32GP202T-I/SS is a 16-bit PIC24F microcontroller delivering 16 MIPS performance from a 32 MHz core, packaged in a 28-pin SSOP. It integrates 32 KB of ECC Flash program memory, 8 KB of RAM, and a rich set of Core Independent Peripherals (CIPs) alongside a Full-Speed USB 2.0 Host/Device/OTG interface for embedded connectivity. A microcontroller (MCU) is a single-chip computer containing a CPU core, program and data memory, peripherals, and I/O. The PIC24F family sits in Microchip's 16-bit line between the 8-bit PIC16/PIC18 families and the 32-bit PIC32MX/dsPIC families, targeting applications that need more compute than 8-bit parts while keeping low power and small footprints. Within that family, the PIC24FJ32GP202 is a low-pin-count (28-pin) device with USB and ultra-low-power (XLP) sleep modes. Key differentiating specifications include: 32 KB Flash (11K x 24 words) with ECC for safety, 8 KB RAM, USB 2.0 Full-Speed On-The-Go support, 21 general-purpose I/O pins, a 16-channel 10-bit ADC, four 16-bit timers, two UART, two SPI, two I2C, and a 4-channel DMA. The XLP feature cuts sleep current to a few hundred nanoamperes while preserving RAM and select peripherals, making the part suited to battery-powered designs. Architecturally, the PIC24FJ32GP204 family uses a Modified Harvard architecture with separate program and data buses, a 16-bit data path, and DSP-enhanced instructions for signal-processing workloads. Peripherals are arranged for autonomous operation; the DMA controller and CIP blocks let time-critical events run without CPU intervention, freeing the core for application code. Typical applications include USB peripherals (HID, CDC, vendor-key classes), portable medical sensors, low-power IoT nodes, consumer electronics with USB charging/DFU, and motor-control human-interface devices. The 28-pin SSOP footprint simplifies layout on compact two-layer boards. When designing, plan pin allocation early: USB D+/D- pins, the dedicated 32 kHz crystal pins, and at least one ICSP/PGECx/PGEDx pair must be reserved. Decouple VDD/VUSB/VBAT with 100 nF ceramics placed within 5 mm of each pin pair. This page synthesizes distributor stock, drop-in Microchip cross-references, and practical design notes that go beyond the manufacturer datasheet.

견적 요청 문의하기
PIC24FJ32GP203-E/M5 - 16-bit XLP MCU, 32KB Flash | Microchip
PIC24FJ32GP203-E/M5

PIC24FJ32GP203-E/M5 - 16-bit XLP MCU, 32KB Flash | Microchip

The Microchip Technology PIC24FJ32GP203-E/M5 is a 16-bit microcontroller from the PIC24F eXtreme Low-Power (XLP) family, featuring 32KB of ECC Flash program memory, 8KB of RAM, and a 32MHz (16 MIPS) modified Harvard core, housed in a 36-pin UQFN (5x5 mm) package with the E-temp (-40C to +125C) industrial operating range. It belongs to the GP2 sub-family of the PIC24FJ series, which integrates several Core Independent Peripherals (CIPs) and targets USB-capable, low-power embedded designs. A PIC24FJ microcontroller is a 16-bit modified-Harvard RISC MCU built around Microchip's PIC24 architecture, which sits in the broader hierarchy of microcontrollers -> MCUs -> RISC processors -> semiconductor ICs. The PIC24FJ family is specifically engineered for low-power, mixed-signal embedded applications where deterministic real-time response, peripheral integration, and extended battery life are required. The 'FJ' suffix denotes Flash program memory with the XLP nanoWatt technology for deep sleep currents down to hundreds of nA while retaining RAM and core state. Key features include 32KB (11K x 24 instructions) ECC Flash with self-programming, 8KB SRAM, a hardware multiply/divide engine, 27 I/O pins, three 16-bit timers, four DMA channels, up to four UART, three SPI, three I2C, and a 10-bit 1.1 Msps ADC with up to 13 channels. CIP blocks include configurable logic cells (CLC), multi-vector interrupt controller, and a real-time clock calendar (RTCC) with calibration. The 36-pin UQFN package (5x5 mm with exposed pad) enables compact PCB layouts for space-constrained products. From an architecture standpoint, the PIC24FJ32GP203 uses a 16-bit modified-Harvard bus with separate program and data paths, a 24-bit instruction word, and hardware DSP-like multiply/divide. The ECC Flash corrects single-bit errors and detects multi-bit errors, increasing reliability in harsh environments. The XLP technology combined with the PMD (Peripheral Module Disable) registers allows unused peripherals to be turned off to drop active power below 1 mA/MIPS. Typical applications include low-power IoT sensor nodes, battery-powered medical wearables, USB human-interface devices, industrial data loggers, and consumer appliances requiring extended battery life. The 32KB Flash and 8KB RAM are well matched to mid-sized state machines and communication stacks (ZigBee, LoRa, BLE via external radio). Design consideration: route the exposed thermal pad of the UQFN-36 to a continuous ground pour and place decoupling capacitors (100 nF plus 10 uF bulk) within 2 mm of the VDD/VSS pins. The internal voltage regulator requires the ENVREG pin to be tied correctly for the 2V-3.6V supply range. This page synthesizes distributor pricing, drop-in alternatives, and practical design notes not found in the manufacturer datasheet.

견적 요청 문의하기
PIC24FJ32GP203-I/M5 - 16-bit XLP MCU, 32KB Flash, 36-UQFN | Microchip
PIC24FJ32GP203-I/M5

PIC24FJ32GP203-I/M5 - 16-bit XLP MCU, 32KB Flash, 36-UQFN | Microchip

The Microchip Technology PIC24FJ32GP203-I/M5 is a 16-bit microcontroller from the PIC24F eXtreme Low-Power (XLP) family, delivering 16 MIPS at 32 MHz CPU speed with 32 KB ECC Flash and 8 KB SRAM, housed in a 36-pin UQFN (5x5 mm) package with industrial -40C to +85C temperature range. A 16-bit MCU (microcontroller unit) is a single-chip computer integrating a CPU, RAM, Flash program memory, and peripherals on one die. The PIC24F family sits within Microchip's broader product hierarchy: PIC24F -> 16-bit MCU -> MCU -> microcontroller -> embedded processor -> semiconductor. PIC24F parts target ultra-low-power applications with nanoWatt sleep technology that retains data while drawing only hundreds of nA. Key features include 32 KB ECC Flash (11K x 24 words), 8 KB SRAM, a wide 2.0V to 3.6V operating range, and core-independent peripherals (CIPs) that operate without CPU intervention. The device supports Full Speed USB 2.0 Host/Device/OTG in the broader family and provides multiple serial interfaces including UART, SPI, and I2C. The 16 MIPS performance at 32 MHz provides deterministic execution for real-time control tasks while the XLP architecture minimizes active and sleep current consumption. The PIC24FJ32GP203-I/M5 uses a 16-bit modified Harvard RISC architecture with a hardware multiply divider and DSP-oriented instructions. CIPs such as timers, capture/compare, and PWM modules offload tasks from the CPU, reducing firmware complexity and power consumption. ECC Flash enhances reliability for safety-sensitive applications by detecting and correcting single-bit errors. Typical applications include industrial sensor nodes, low-power IoT edge devices, battery-powered portable instruments, USB peripherals, and human-machine interface (HMI) controllers. The industrial temperature range and XLP technology make it well-suited for energy-harvesting and remote-monitoring designs. When designing with this device, pay attention to the wide supply voltage range and ensure decoupling capacitors are placed close to the VDD pins. The compact 36-UQFN package requires careful PCB layout for thermal dissipation and reliable manufacturing. This page consolidates distributor pricing, drop-in alternatives, and practical design notes not found in the manufacturer datasheet, supporting faster design-in and BOM decisions.

견적 요청 문의하기
PIC24FJ32GP203T-I/M5 - 16-bit 32MHz 32KB Flash MCU | Microchip
PIC24FJ32GP203T-I/M5

PIC24FJ32GP203T-I/M5 - 16-bit 32MHz 32KB Flash MCU | Microchip

The Microchip Technology PIC24FJ32GP203T-I/M5 is a 16-bit PIC24F microcontroller running up to 32MHz (16 MIPS) with 32KB of ECC Flash program memory and 8KB of SRAM, housed in a 36-pin UQFN 5x5 mm package. The part integrates two UART, two SPI, two I2C peripherals, two DMA controllers, and multiple 16-bit timers, plus a 14-channel 10/12-bit Analog-to-Digital Converter, providing a complete mixed-signal processing platform for embedded designs. A microcontroller (MCU) is an integrated circuit that combines a CPU core, program memory (Flash/ROM), data memory (RAM), and a configurable set of peripherals (UART, SPI, I2C, ADC, timers, PWM, GPIO) on a single die. The PIC24FJ family sits in Microchip's 16-bit microcontroller hierarchy between 8-bit PIC16/PIC18 devices and 32-bit PIC32 parts, in the broader category of embedded microcontrollers -> microprocessors -> semiconductors. The 16-bit modified Harvard architecture delivers 16 MIPS at 32MHz while retaining the deterministic interrupt and peripheral model Microchip is known for. Key features of the PIC24FJ32GP203T-I/M5 include eXtreme Low Power (XLP) technology for sub-uA sleep currents suitable for battery-powered products, an integrated charge time measurement unit (CTMU) for capacitive touch sensing, a peripheral pin select (PPS) system that routes digital peripherals to most GPIO pins, and a separate RTCC with its own 32 kHz domain. The 14 ADC channels support both 10-bit and 12-bit conversion modes, with on-chip voltage reference options. The device is built on a low-power CMOS process and supports 2.0V to 3.6V single-supply operation. The internal oscillator and the PLL reduce external component count, while the integrated POR/BOR/LVD circuitry improves robustness in industrial environments. JTAG and ICSP programming/debug interfaces are provided through dedicated pins, allowing in-circuit debug with the MPLAB X IDE and the MPLAB ICD/PICKit tools. Typical applications include low-power IoT sensor nodes, capacitive touch user interfaces, industrial sensor conditioning nodes, portable medical accessories, and consumer devices with USB-free communication stacks. The 32KB Flash is comfortable for small RTOS, USB stacks, or graphics routines. When designing with this part, choose the correct package code: /M5 corresponds to the 36-pin UQFN (5x5 mm) and is the smallest package in the family. Pin-remapping is handled by PPS, so verify your pin map against the device datasheet before finalizing the schematic. This page synthesizes distributor pricing, drop-in alternatives, and practical design notes not found in the manufacturer datasheet alone, with compliance, lifecycle, and inventory signals aggregated from multiple authorized distributors.

견적 요청 문의하기
PIC24FJ32GP205-E/M4 - 32KB Flash 16-bit XLP MCU 48-UQFN | Microchip
PIC24FJ32GP205-E/M4

PIC24FJ32GP205-E/M4 - 32KB Flash 16-bit XLP MCU 48-UQFN | Microchip

The Microchip Technology PIC24FJ32GP205-E/M4 is a 16-bit microcontroller from the PIC24FJ GP2/USB family, featuring 32KB ECC Flash, 8KB RAM, and a 32 MHz (16 MIPS) core, housed in a 48-pin UQFN (6x6 mm) package with exposed pad. The -E temperature suffix designates the industrial -40C to +125C operating range, making the device suitable for harsh-environment and automotive-adjacent designs. A 16-bit microcontroller (MCU) is an embedded processor that balances performance and power efficiency versus MCUs by combining a 16-bit data path, on-chip Flash program memory, RAM, and a rich peripheral set. Within the embedded hierarchy it sits above 8-bit MCUs (PIC16, AVR) and below 32-bit MCUs (Cortex-M, PIC32), serving as the workhorse for mid-complexity applications. Microchip's PIC24F family specifically targets low-power designs branded XLP, achieving sub-microamp sleep currents while retaining state and offering peripheral operation without CPU intervention through Core Independent Peripherals (CIPs). Key features of this part include 32KB ECC Flash (11K x 24 words) for safety-critical code, 8KB RAM for data buffers, USB 2.0 Full-Speed Host/Device/OTG support, multiple 16-bit timers, configurable logic cells, and a 13-channel 10-bit ADC. The device runs from 2.0V to 3.6V Vdd and integrates a hardware real-time clock calendar (RTCC) with battery backup support. Core Independent Peripherals such as the DMA, Configurable Logic Cell (CLC), and Peripheral Trigger Generator (PTG) allow complex sequencing without CPU load. Architecturally the PIC24FJ32GP205-E/M4 uses a modified Harvard architecture with a 24-bit instruction word and 16-bit data path. The 32 MHz system clock delivers 16 MIPS throughput (one instruction per two clocks), and the integrated USB 2.0 Full-Speed transceiver eliminates external PHY components. ECC on Flash protects against bit errors in noisy industrial environments, complementing the XLP sleep modes that drop current to a few hundred nanoamperes. Typical applications include USB peripherals (HID, CDC, mass storage), low-power sensor nodes with battery backup, industrial HMI and instrumentation, portable medical devices, and consumer products requiring USB connectivity and long battery life. The wide operating temperature range and small footprint make it well suited to space-constrained industrial modules. When designing with this part, carefully route the exposed pad (EP) to a continuous ground plane for thermal dissipation and signal integrity. USB DP/DM traces must be length-matched within 150 mils, and the on-chip voltage regulator requires a 10uF + 0.1uF decoupling network at Vcap. Designers should also budget Flash endurance (typically 100K erase/write cycles) when planning for in-field firmware updates. This page synthesizes Microchip datasheet parameters, distributor pricing, and drop-in alternative guidance not found in any single distributor listing - giving procurement and design engineers an actionable comparison reference in one place.

견적 요청 문의하기
PIC24FJ32GP205-I/M4 - 32KB ECC Flash, USB XLP MCU 48-UQFN
PIC24FJ32GP205-I/M4

PIC24FJ32GP205-I/M4 - 32KB ECC Flash, USB XLP MCU 48-UQFN

The Microchip Technology PIC24FJ32GP205-I/M4 is a 16-bit PIC24F microcontroller from the 'GP2/GP2' family, integrating 32 KB of ECC Flash, 8 KB of RAM, and Full-Speed USB 2.0 Host/Device/OTG in a compact 48-pin UQFN (6x6 mm) package. It executes instructions at 16 MIPS via a 32 MHz internal oscillator and is engineered for Xtreme Low-Power (XLP) applications with sleep currents in the hundreds of nanoamps while retaining essential RAM content. A 16-bit microcontroller (MCU) is a programmable logic device that balances 8-bit simplicity with 32-bit performance, executing instructions on 16-bit data paths to deliver higher code density and deterministic interrupt response than 8-bit cores. Within the broader taxonomy, the PIC24F family sits between 8-bit PIC MCUs and 32-bit PIC32 parts, making it suitable for applications that require USB connectivity, capacitive touch sensing, or mixed-signal peripheral integration without migrating to ARM-class processors. Key features include a 32 KB ECC Flash program memory, 8 KB SRAM, hardware USB 2.0 Full-Speed with OTG, multiple Core Independent Peripherals (CIPs) such as configurable logic cells and 24-bit signal routing, a 12-bit A/D converter with up to 500 ksps throughput, and 5V-tolerant I/O. The device also provides multiple low-power sleep modes down to a few hundred nA, real-time clock and calendar (RTCC) with calendar mode, and hardware crypto engines for secure firmware updates. The PIC24FJ32GP205 architecture uses a Modified Harvard structure with separate program and data paths, an 8-stage pipeline for sustained 16 MIPS throughput, and a wide range of peripherals including multiple UART, SPI, I2C, and PMP/EPMP interfaces. The XLP technology allows dynamic switching between active, idle, and deep-sleep modes with retention, dramatically extending battery life in intermittently active systems. Typical applications include USB Human Interface Devices (HID), battery-powered data loggers, portable medical telemetry, IoT sensor hubs, and industrial control panels. Designers value its USB-OTG capability for embedded host/device role switching without an external PHY. When designing with this MCU, route the USB DP/DM differential pair with 90 ohm impedance and place the 48-UQFN exposed pad with adequate thermal vias. Decouple VDD/VUSB pins with 100 nF + 4.7 uF ceramics. The wide -40C to +85C industrial operating range suits outdoor and automotive cabin deployments. This page synthesizes distributor pricing, drop-in same-package alternatives from the same PIC24FJ family, and practical design notes not aggregated on the manufacturer datasheet.

견적 요청 문의하기
PIC24FJ32GP205T-I/M4 - 16-bit MCU, 32KB Flash, 48-UQFN | Microchip
PIC24FJ32GP205T-I/M4

PIC24FJ32GP205T-I/M4 - 16-bit MCU, 32KB Flash, 48-UQFN | Microchip

The Microchip Technology PIC24FJ32GP205T-I/M4 is a 16-bit PIC24F microcontroller featuring 32 KB of ECC Flash, 8 KB of SRAM, and a 32 MHz / 16 MIPS CPU core, housed in a compact 48-pin UQFN (6x6 mm) package. Operating from 2.0 V to 3.6 V, this eXtreme Low Power (XLP) device targets battery-powered and energy-harvesting applications with deep sleep currents in the microamp range. The 39 available I/O pins, two UART, two SPI, and two I2C peripherals provide flexible connectivity, while integrated 10-bit and 12-bit ADC channels enable direct sensor interfacing. A 16-bit microcontroller (MCU) is a class of embedded processor that combines a 16-bit data path with higher code density than 8-bit parts while remaining lower-cost and lower-power than 32-bit Cortex-M cores. Within the system hierarchy, a 16-bit MCU sits between 8-bit controllers (PIC16, AVR) and 32-bit microcontrollers (PIC32, STM32); it integrates CPU, Flash, RAM, and peripherals onto a single silicon die, eliminating external memory for many designs. Key features of the PIC24FJ32GP205T-I/M4 include 32 KB ECC Flash (11K x 24 words) for reliable code storage, 8 KB SRAM for data buffering, 39 I/O, and rich Core Independent Peripherals (CIPs) such as multiple timers, comparators, and configurable logic cells. The device supports industrial operating temperatures from -40C to +85C (I suffix) and operates up to 32 MHz. Its 16 MIPS performance is sufficient for sensor fusion, low-power wireless protocol stacks, and motor control loops. The PIC24FJ32GP205T-I/M4 uses a Modified Harvard RISC architecture with a 16-bit instruction width, enabling single-cycle execution of most instructions including multiply. On-chip peripherals include a 12-bit/200 ksps ADC, three analog comparators, RTCC, and the Peripheral Pin Select (PPS) feature that remaps digital functions to any I/O pin, simplifying PCB layout. Typical applications include IoT sensor nodes, portable medical devices, low-power wireless remote controls, energy metering, HMI touch interfaces, and battery-backed industrial controllers. Designers select this part for its small 48-pin UQFN footprint, low active and sleep currents, and Microchip's free MPLAB X IDE + XC16 toolchain. Design consideration: the 48-pin UQFN package requires a thermal pad for heat dissipation; do not exceed 32 MHz across the full 2.0 V to 3.6 V range, and place decoupling capacitors within 5 mm of each VDD/VSS pair to minimize switching noise. This page synthesizes distributor pricing, drop-in alternatives, and practical design notes not found in the manufacturer datasheet, giving engineers a one-stop reference for PIC24FJ32GP205T-I/M4 selection.

견적 요청 문의하기
PIC24FJ32GP205T-I/PT - 16-bit MCU, 32KB Flash, 48-TQFP | Microchip
PIC24FJ32GP205T-I/PT

PIC24FJ32GP205T-I/PT - 16-bit MCU, 32KB Flash, 48-TQFP | Microchip

The Microchip Technology PIC24FJ32GP205T-I/PT is a 16-bit RISC microcontroller from the PIC® 24F family, featuring 32KB of ECC Flash program memory, 8KB of data RAM, and a maximum 32MHz operating frequency with 16 MIPS performance, housed in a 48-pin TQFP (7x7 mm) package. The device integrates a 12-bit/400 Ksps ADC with up to 10/12-bit resolution modes, three analog comparators, and a rich set of Core Independent Peripherals (CIPs) including MCCP (Multiple Capture/Compare/PWM) modules and DMA channels that offload CPU-intensive tasks. A microcontroller (MCU) is a single-chip computer containing a CPU core, memory, and programmable I/O peripherals, forming the lowest-level computing element in embedded systems. The PIC24FJ32GP205 belongs to the PIC24F 'GP2' sub-family of eXtreme Low Power (XLP) microcontrollers, sitting in the hierarchy: PIC24FJ32GP205 -> PIC24F MCU -> 16-bit microcontroller -> MCU -> embedded computing -> semiconductor. XLP technology achieves sub-uA sleep currents, making this part suitable for battery-powered designs where quiescent draw dominates battery life. Key differentiating specifications include the integrated 12-bit ADC capable of 400 Ksps conversion rate, hardware DMA with multiple channels for autonomous peripheral data movement, and CIPs that allow sensor interfacing, signal generation, and safety functions without CPU intervention. The device operates from 2.0V to 3.6V supply and supports -40C to +85C industrial temperature range, with 39 general-purpose I/O pins available for application interfacing. Architecturally, the PIC24FJ32GP205 uses a modified Harvard architecture with separate program and data paths, executed by a 16-bit modified-RISC CPU core with a 16x16-bit hardware multiplier. This single-cycle multiplier accelerates DSP-oriented operations (FIR filters, control loops) commonly found in motor control and signal conditioning applications. Typical applications include industrial sensor hubs, low-power IoT edge nodes, USB-aware embedded controllers (the GP205 variant omits full-speed USB but the family includes USB-equipped variants), battery-powered instrumentation, and consumer HMI subsystems. The integrated DMA and CIPs reduce firmware complexity for multi-sensor systems. Design consideration: the 'T' suffix denotes Tape & Reel packaging for high-volume assembly; the 'I' indicates the industrial -40C to +85C temperature grade. For automotive applications select the 'E' or 'H' grade variant instead. This page synthesizes distributor pricing, pin-compatible alternatives from the same PIC24FJ 'GP2' family, and practical design notes not consolidated in the manufacturer datasheet.

견적 요청 문의하기
PIC24FJ32GU202-E/ML - 32KB Flash, USB MCU 28-QFN | Microchip
PIC24FJ32GU202-E/ML

PIC24FJ32GU202-E/ML - 32KB Flash, USB MCU 28-QFN | Microchip

The Microchip Technology PIC24FJ32GU202-E/ML is a 16-bit microcontroller from the PIC24FJ GP2/GU2 family featuring 32 KB of ECC Flash, 8 KB of RAM, Full-Speed USB 2.0 Host/Device/OTG, and core-independent peripherals (CIPs) in a 28-pin QFN (6x6 mm) package. It executes up to 16 MIPS at 32 MHz from a 2.0-3.6 V supply, and the extended "-E" temperature grade operates from -40C to +125C. Sleep current drops to a few hundred nanoamps, qualifying the part for XLP (eXtreme Low Power) battery applications. A 16-bit microcontroller is a single-chip computer that uses a 16-bit data path and instruction word to balance deterministic real-time control with higher code density than 8-bit parts. The PIC24F family sits between 8-bit PIC MCUs and 32-bit ARM Cortex parts in the Microchip portfolio, offering USB and richer analog/peripheral integration while preserving the PIC instruction set, MPLAB X IDE compatibility, and a broad ecosystem of compiler, debugger, and code-generation tools. ECC Flash and the CIP block (configurable logic cells, timers, PWM, and communication peripherals) reduce external component count and BOM cost. Key features include hardware USB 2.0 FS OTG, up to 20 user I/O, multiple CIPs, a 12-bit ADC, configurable logic cells, and low-power sleep with RAM retention. ECC Flash improves reliability in safety-sensitive firmware, while the 16 MIPS core gives deterministic throughput for real-time control loops. Typical applications include USB peripherals (HID, CDC, mass storage), battery-powered IoT sensor nodes, low-power industrial sensors, USB smart-card readers, and consumer wearables that benefit from nanoamp sleep current and on-chip USB. Engineers choose this part when they need an integrated USB controller, ample RAM for USB stacks, and an extended-temperature grade in a compact 6x6 mm QFN. For new designs, verify the active QFN package (28-QFN, 6x6 mm, E-temp) against the PCB footprint and confirm USB bus-power decoupling. This page synthesizes distributor pricing, same-brand drop-in alternatives within the PIC24FJ family, and design notes not bundled in the manufacturer datasheet.

견적 요청 문의하기
PIC24FJ32GU202-E/MV - 16-bit 32KB Flash USB MCU | Microchip
PIC24FJ32GU202-E/MV

PIC24FJ32GU202-E/MV - 16-bit 32KB Flash USB MCU | Microchip

The Microchip Technology PIC24FJ32GU202-E/MV is a 16-bit eXtreme Low-Power PIC24F microcontroller with 32KB ECC Flash, 8KB RAM, and Full-Speed USB 2.0 Host/Device/OTG, running at 32 MHz (16 MIPS) in a 28-pin UQFN (MV) 4x4 mm package. It supports an extended operating temperature range of -40C to +125C and operates from 2.0V to 3.6V, suiting battery-powered and industrial designs. A microcontroller (MCU) is a single-chip computer that integrates a CPU core, non-volatile program memory (Flash), volatile data memory (RAM), and a set of on-chip peripherals such as timers, ADCs, communication controllers, and general-purpose I/O. The PIC24F family sits in the 16-bit RISC tier of Microchip's product hierarchy: PIC10/12/16 (8-bit) -> PIC24 (16-bit) -> dsPIC33/PIC32 (32-bit). Within the PIC24F range, the GU2 sub-family is differentiated by integrated USB 2.0 FS and Core Independent Peripherals (CIPs) that operate without CPU intervention. Key features include 32 KB ECC Flash (11K x 24 words), 8 KB SRAM, an integrated 16-bit sigma-delta ADC, multiple UART/SPI/I2C, five 16-bit timers, and hardware Real-Time Clock with calendar. The "xLP" eXtreme Low-Power architecture delivers sleep currents in the low hundreds of nA while retaining RAM and the RTCC, enabling coin-cell and energy-harvesting deployments. The GU2 architecture uses a Harvard RISC core with single-cycle 16-bit instructions, a 17 x 17 hardware multiplier, and a 32-bit barrel shifter. ECC on Flash improves reliability in noisy environments; the USB peripheral supports LS/FS modes plus OTG role swap. On-chip CIPs include CLC, MCCP/SCCP, and hardware CRC, offloading deterministic tasks from the CPU to lower power and latency. Typical applications include USB HID/CDC devices, wearable medical sensors, industrial data loggers, low-power wireless sensor nodes, and battery-backed metering. The wide temperature range and ECC Flash are valued in automotive aftermarket and outdoor industrial nodes where retention over thermal cycling matters. When designing with this part, place the 28-UQFN decoupling network (100 nF per VDD + 4.7 uF bulk) within 3 mm of the pins and route the USB DP/DM pair with 90 ohm differential impedance. The E grade indicates -40C to +125C, while the I grade extends to +85C; do not mix grades if your thermal profile approaches 125C. This page synthesizes distributor pricing, drop-in alternatives, and practical design notes not found in the manufacturer datasheet.

견적 요청 문의하기
PIC24FJ32GU202-E/SO - 16-bit 32KB ECC Flash USB MCU | Microchip
PIC24FJ32GU202-E/SO

PIC24FJ32GU202-E/SO - 16-bit 32KB ECC Flash USB MCU | Microchip

The Microchip Technology PIC24FJ32GU202-E/SO is a 16-bit eXtreme Low-Power (XLP) microcontroller from the PIC24FJ GP2/GU2 family, delivering 16 MIPS performance from a 32 MHz PIC24 CPU core, integrating 32 KB of ECC Flash program memory (11K x 24) and 8 KB of RAM, and housed in a 28-pin SOIC (SO) wide-body package. It integrates a Full-Speed USB 2.0 Host/Device/OTG transceiver on-chip, eliminating the need for an external PHY in cost-sensitive USB designs. The part operates across a 2.0 V to 3.6 V supply range (nominal 3.3 V), supports the extended industrial temperature grade (-40 °C to +125 °C) as denoted by the 'E' designator, and provides multiple 16-bit timers, configurable I/O, and Core Independent Peripherals (CIPs). A 16-bit microcontroller (MCU) is an embedded processor with a 16-bit data path, register file, and ALU, positioned between 8-bit entry-level MCUs and 32-bit Cortex-M class devices. The PIC24FJ family extends Microchip's 16-bit dsPIC/PIC24 line with XLP nanoWatt technology and dedicated USB-OTG silicon, targeting battery-powered and tethered peripherals that demand deterministic interrupt response, hardware CIPs for offloading the CPU, and USB connectivity in a single die. Key differentiating specifications include integrated Full-Speed USB 2.0 Host/Device/OTG, 32 KB ECC Flash with hardware error correction for improved reliability in harsh environments, 8 KB RAM that supports USB endpoint buffers plus application stack/heap, and XLP sleep currents in the hundreds of nanoamperes while retaining SRAM and interrupt context. The 16 MIPS performance at 32 MHz gives 62.5 ns instruction cycle, suitable for real-time control loops. Peripherals typically include multiple UART/SPI/I2C, a 10/12-bit ADC, comparators, and RTCC. Typical applications are USB Human Interface Devices (HID), USB-to-UART bridges, low-power sensor loggers, industrial data loggers with USB upload, medical point-of-care USB peripherals, and battery-powered consumer accessories. The 28-SOIC footprint eases hand-soldering and rework for prototypes and small-volume production. When designing, allocate the 8 KB RAM carefully between USB endpoint FIFOs and application data to avoid overrun, place the USB DP/DM traces as a 90-ohm differential pair, and bypass VDD/VUSB with 100 nF plus 4.7 µF bulk capacitors placed within 5 mm of the pins. This page synthesizes distributor pricing, same-brand Microchip drop-in alternatives, and practical design notes not found in the manufacturer datasheet alone, giving the buyer a single reference for selecting and validating the PIC24FJ32GU202-E/SO.

견적 요청 문의하기