집적 회로

하위 카테고리

📁 ADC/DAC 2519 제품 📁 증폭기 IC 796 제품 📁 오디오 코덱 16 제품 📁 오디오 IC 2 제품 📁 클록 및 타이밍 298 제품 📁 DSP 963 제품 📁 데이터 수집 IC 2 제품 📁 디지털 포텐셔미터 4 제품 📁 디스플레이 드라이버 및 컨트롤러 1 제품 📁 FPGA & CPLD 6666 제품 📁 인터페이스 IC 1584 제품 📁 LED 드라이버 1 제품 📁 로직 IC 305 제품 📁 메모리 IC 875 제품 📁 마이크로컨트롤러 18726 제품 📁 마이크로프로세서 4 제품 📁 모터 드라이버 1 제품 📁 기타 1 제품 📁 Sensor and Detector Interfaces 1 제품 📁 특수 IC 15 제품 📁 비디오 IC 13 제품

제품 (32795)

PIC32MK0512MCJ048-E/7MX - 32-bit 120MHz MCU 512KB Flash | Microchip
PIC32MK0512MCJ048-E/7MX

PIC32MK0512MCJ048-E/7MX - 32-bit 120MHz MCU 512KB Flash | Microchip

The Microchip Technology PIC32MK0512MCJ048-E/7MX is a 32-bit MIPS32 microAptiv microcontroller with a 120MHz core, 512KB ECC-protected dual-panel Flash, and 64KB SRAM, housed in a 48-pin VQFN (6x6 mm) package with an exposed thermal pad. The device is AEC-Q100 qualified for automotive applications and is part of the PIC32MK General Purpose and Motor Control (MCJ) family with integrated CAN-FD peripherals. A 32-bit microcontroller (MCU) is an integrated circuit that combines a CPU core, program memory (Flash), data memory (RAM), and programmable peripherals on a single silicon die. Within the broader taxonomy, an MCU belongs to the microcontroller family, which sits under embedded processors and semiconductors. The PIC32MK family extends this concept into the 32-bit MIPS RISC domain, adding DSP extensions, a single-precision hardware Floating Point Unit (FPU), and microMIPS compressed instruction mode for 40% smaller code size. Key features of the PIC32MK0512MCJ048-E/7MX include four 64-bit accumulators with single-cycle MAC supporting saturating and fractional math, four 12-bit ADC modules operating up to 3.75 MSPS with up to 42 analog inputs, and dedicated motor-control PWM peripherals targeting Field-Oriented Control (FOC) of BLDC and PMSM motors. The 3.3V operating range (2.3V to 3.6V) and 37 digital I/O pins make the device suitable for mixed-signal industrial designs. The architecture pairs the microAptiv core with a Dual-Panel Flash supporting Live Update, allowing firmware to be swapped in real time without CPU stall. A separate 12-bit DAC, multiple UART/SPI/I2C, and two CAN-FD controllers position the part for IIoT gateways, automotive body controllers, and multi-axis motor drives. Typical applications include Brushless DC (BLDC) motor control for e-bikes and appliances, Industrial Internet of Things (IIoT) sensor nodes, automotive body and chassis ECUs, multi-channel CAN-FD networks, and precision industrial-control PLCs. The extended (-40C to +125C) operating range supports harsh under-hood automotive environments. When designing with this device, allocate the dual-panel Flash for fail-safe firmware updates and reserve the motor-control PWMs for timing-critical switching. The 6x6 VQFN requires thermal vias under the exposed pad to keep junction temperature within derating limits at full 120MHz operation. This page synthesizes distributor stock, AEC-Q100 qualification data, and drop-in alternatives in the same 48-pin VQFN footprint not found in a single distributor listing.

견적 요청 문의하기
PIC32MK0512MCJ048-E/Y8X - 32-Bit MCU 80MHz 512KB Flash | Microchip
PIC32MK0512MCJ048-E/Y8X

PIC32MK0512MCJ048-E/Y8X - 32-Bit MCU 80MHz 512KB Flash | Microchip

The Microchip Technology PIC32MK0512MCJ048-E/Y8X is a 32-bit MIPS32 microAptiv microcontroller operating up to 80 MHz with 512 KB of Flash program memory and 64 KB of SRAM, housed in a 48-pin TQFP (7x7 mm) package. It targets motor control, industrial control, and Industrial IoT applications with on-chip FPU, four 64-bit accumulators, and a 12-bit ADC and 12-bit DAC. What is a 32-bit MCU? A microcontroller (MCU) is a single-chip computer integrating a CPU core, memory, and programmable peripherals. The PIC32MK belongs to the PIC32 family of 32-bit microcontrollers and is part of the broader MIPS-based MCU hierarchy (MCU -> microcontroller -> embedded processor -> semiconductor). Its microAptiv core with FPU enables single and double-precision floating-point math, while MicroMIPS mode delivers roughly 40 percent smaller code size for memory-constrained applications. Key features of this variant include 512 KB dual-panel Flash with live update support, 64 KB SRAM, four 12-bit ADC modules totaling up to 27 channels, motor-control PWM peripherals, CAN-FD, USB, and up to 37 general-purpose I/O pins. The ECC-protected Flash and ECC SRAM improve reliability for industrial and automotive-grade designs. Architecturally, the PIC32MK0512MCJ048 uses a single-cycle MAC unit with saturating and fractional math support, ideal for DSP-style signal processing in motor-control loops. The 80 MHz operation paired with DSP extensions allows high-bandwidth control algorithms in field-oriented control (FOC) and PFC stages. Typical applications include BLDC/PMSM motor drives, industrial PLCs, IIoT sensor hubs, digital power converters, and automotive body controllers. The combination of CAN-FD, USB, and rich analog peripherals makes it a single-chip solution for connected industrial nodes. When designing with this part, note the -E temperature grade (-40C to +125C) suits industrial environments. Verify supply voltage and decoupling against the datasheet's DC characteristics section before committing to a PCB layout. This page synthesizes distributor pricing, drop-in alternatives, and practical design notes not found in the manufacturer datasheet alone.

견적 요청 문의하기
PIC32MK0512MCJ048-I/7MX - 120MHz MCU 512KB Flash 48-VQFN | Microchip
PIC32MK0512MCJ048-I/7MX

PIC32MK0512MCJ048-I/7MX - 120MHz MCU 512KB Flash 48-VQFN | Microchip

The Microchip Technology PIC32MK0512MCJ048-I/7MX is a 32-bit MIPS32 microAptiv PIC microcontroller IC running at 120MHz with 512KB (512K x 8) of Flash and 64KB RAM, packaged in a 48-pin VQFN (6x6 mm) industrial-grade (-40C to +85C) housing. It combines a single-precision/double-precision hardware Floating Point Unit, four 64-bit accumulators, single-cycle MAC with saturating and fractional math, and MicroMIPS mode for 40% smaller code size, delivering 120MHz of DSP-class compute. The device operates from 2.3V to 3.6V and offers five 5V-tolerant I/O pins with up to 22 mA source/sink capability plus 37 total I/O. What is a 32-bit MCU? A microcontroller (MCU) is a single-chip computer containing a CPU core, memory (Flash for program storage, SRAM for data), and integrated peripherals. The PIC32MK0512MCJ048 belongs to the hierarchy: 32-bit microcontroller -> ARM/MIPS-class MCU -> PIC32 family -> PIC32MK sub-family -> motor-control + CAN-FD + FPU/DSP variant. MCUs dominate embedded control because they integrate decision-making, timing, and peripheral interfacing into one package, replacing discrete logic + microprocessor + external memory designs. Key differentiating features include: 120MHz core with hardware FPU and DSP extensions (IEEE 754 single and double precision), 512KB dual-panel Flash with live update capability, ECC-protected memory, integrated CAN-FD controller, dedicated motor-control PWM peripherals, four 64-bit accumulators for high-dynamic-range signal processing, and 12-bit ADC at up to 3.75 Msps. The 48-VQFN package with exposed thermal pad enables compact industrial and IIoT designs. Architecture depth: The microAptiv core implements the MIPS32r2 ISA with MicroMIPS compressed mode, giving a 40% code-density advantage over pure 32-bit. The FPU executes IEEE 754 single- and double-precision operations in hardware, freeing the CPU for control loops. Four 64-bit accumulators and single-cycle 32x32 MAC with saturating math enable field-oriented control (FOC) algorithms for permanent-magnet synchronous motors (PMSM) and brushless DC (BLDC) drives within a single chip. Typical applications include field-oriented motor control (PMSM/BLDC), industrial PLC and automation, CAN-FD networked sensor nodes, multi-channel data acquisition, robotics and servo drives, and Industrial IoT (IIoT) edge controllers. The combination of FPU, CAN-FD, and motor-control PWM makes it a single-chip solution for closed-loop motor control over industrial buses. Design consideration: When migrating from a PIC32MX to PIC32MK0512, note that the 48-VQFN pinout differs - verify the package land pattern against the datasheet (DS60001570D) before reusing existing PCB footprints. The device requires a 2.3V-3.6V supply; 5V-tolerant I/O simplifies interfacing to legacy 5V sensors and gate drivers but the core supply must still be regulated. This page synthesizes Microchip distributor pricing, pin-compatible drop-in alternatives from the PIC32MK family, and engineering design notes for motor-control firmware development that are not found in the standalone datasheet.

견적 요청 문의하기
PIC32MK0512MCJ048-I/Y8X - 32-Bit 120MHz MCU with FPU & CAN-FD | Microchip
PIC32MK0512MCJ048-I/Y8X

PIC32MK0512MCJ048-I/Y8X - 32-Bit 120MHz MCU with FPU & CAN-FD | Microchip

The Microchip Technology PIC32MK0512MCJ048-I/Y8X is a 32-bit MIPS32 microAptiv microcontroller IC running at 120 MHz, integrating 512 KB of Flash with ECC and 64 KB of SRAM in a 48-pin TQFP (7x7 mm) package. It features a single-precision/double-precision Floating Point Unit (FPU), MicroMIPS mode for 40% smaller code size, four 64-bit accumulators, and single-cycle MAC supporting saturating and fractional math. These DSP-grade features target real-time motor control, digital power conversion, and Industrial Internet of Things (IIoT) applications. A 32-bit microcontroller (MCU) is a programmable processor that integrates CPU, memory, and peripherals on a single die. Within the embedded hierarchy, microcontrollers fall under microprocessors -> processors -> semiconductors. The PIC32MK family specifically bridges high-performance digital signal processing and deterministic real-time control, sitting in the power management and motor control segment of Microchip's portfolio alongside dsPIC33 and SAM-class devices. Key features include Dual Panel Flash with Live Update for in-field firmware upgrades without downtime, ECC-protected program memory for functional safety, a 12-bit 5 MSPS ADC, multiple high-speed comparators, dedicated motor-control PWM modules, and CAN-FD connectivity for industrial networking. The device operates from 2.3V to 3.6V and supports an industrial temperature range of -40C to +85C. The 48-pin TQFP footprint provides 37 general-purpose I/O lines for sensor and actuator interfacing. Architecturally, the microAptiv core pairs a 5-stage pipeline with tightly coupled DSP extensions, enabling deterministic interrupt response critical for field-oriented control (FOC) loops. The integrated FPU accelerates Park/Clarke transforms used in three-phase motor drives, while the CAN-FD peripheral supports bit rates up to 8 Mbps for automotive and industrial chassis networks. Typical applications include brushless DC (BLDC) and permanent magnet synchronous motor (PMSM) drives, industrial servo controllers, solar inverters, smart sensor hubs, and IIoT edge nodes. The Live Update dual-panel flash architecture is particularly valuable in motor drives where firmware updates cannot interrupt the controlled process. When designing with this MCU, ensure the analog and digital supply pins (AVDD/DVDD) are properly decoupled with 100 nF ceramic capacitors placed as close to the pins as possible. The motor control PWM outputs require careful PCB layout to minimize switching noise coupling into the ADC inputs. This page synthesizes distributor pricing, drop-in same-family alternatives, and practical design notes not consolidated in the Microchip datasheet, enabling faster BOM selection for motor control and IIoT designs.

견적 요청 문의하기
PIC32MK0512MCJ064-E/R4X - 32-bit MCU, 512KB Flash, 64-VQFN | Microchip
PIC32MK0512MCJ064-E/R4X

PIC32MK0512MCJ064-E/R4X - 32-bit MCU, 512KB Flash, 64-VQFN | Microchip

The Microchip Technology PIC32MK0512MCJ064-E/R4X is a 32-bit PIC32MK microcontroller built around the MIPS32 microAptiv core, integrating 512 KB of ECC-protected Flash and 64 KB of SRAM in a 64-pin VQFN (9x9 mm) package. It runs at 120 MHz at 2.3-3.6 V with the FPU and DSP extensions active, making it a strong fit for motor control and industrial signal-chain designs. A microcontroller (MCU) is a single-chip computer that integrates a CPU core, program memory (Flash), working memory (SRAM), and a rich peripheral set into one IC. Within the taxonomy of semiconductors, an MCU sits under microcontrollers -> integrated circuits -> semiconductors, and the PIC32MK series targets real-time deterministic control where DSP and floating-point math accelerate closed-loop algorithms. The microAptiv core plus IEEE 754 single/double-precision FPU distinguishes the PIC32MK family from simpler Cortex-M0/M3 alternatives. Key features include dedicated motor-control PWM modules, multiple CAN-FD controllers, four 64-bit accumulators with single-cycle MAC, op-amps and analog comparators on-chip, and 12-bit ADCs with up to 28 channels. The PIC32MK core supports MicroMIPS mode for ~40% smaller code size, and ECC on Flash improves reliability in safety-conscious applications. The 64-VQFN package exposes rich I/O while keeping board footprint compact at 9x9 mm. The integrated op-amps, comparators, and PWM make the device well-suited for sensorless FOC motor drives, reducing external analog stages. CAN-FD connectivity supports modern automotive and industrial fieldbus protocols. Together, these features let designers replace multiple analog components and external communication ICs with one MCU. Typical applications include BLDC/PMSM motor control, industrial automation, IIoT edge nodes, digital power conversion, and multi-channel sensor hubs. The wide operating voltage and -40C to +125C range also suit harsh industrial environments. When designing with this device, allocate the FPU for field-oriented control math to cut loop time, and use ECC-aware linker files to take advantage of the Flash ECC. Be mindful that the E/R4X variant is rated 80 MHz at the extended 125C temperature grade, while the I-grade runs full 120 MHz at 85C. This page synthesizes distributor pricing, drop-in alternatives, and practical design notes not found in the manufacturer datasheet alone.

견적 요청 문의하기
PIC32MK0512MCJ064-I/PT - 120MHz 512KB Flash MCU | Microchip
PIC32MK0512MCJ064-I/PT

PIC32MK0512MCJ064-I/PT - 120MHz 512KB Flash MCU | Microchip

The Microchip PIC32MK0512MCJ064-I/PT is a 32-bit MIPS microAptiv microcontroller operating up to 120 MHz with 512 KB Flash and 64 KB SRAM, packaged in a 64-pin TQFP (10x10 mm). It targets motor control, industrial automation, and Industrial Internet of Things (IIoT) designs that demand high-performance computation combined with rich analog and communication peripherals. According to the Microchip PIC32MK General Purpose and Motor Control Family datasheet, the device integrates dedicated motor-control PWM, quadrature encoder interfaces, and CAN-FD connectivity. A 32-bit microcontroller (MCU) is an embedded processor that executes instructions from on-chip Flash memory while interfacing with analog and digital peripherals. Microcontrollers sit within the broader taxonomy of microprocessors -> CPUs -> computing ICs -> semiconductors. The PIC32MK family is engineered for real-time control loops, combining deterministic interrupt latency with hardware PWM generation. It belongs to the MIPS architecture lineage and is supported by Microchip's MPLAB X IDE and Harmony framework. The 64-pin TQFP package maps onto the surface-mount QFP family with industry-standard JEDEC footprints. Key features include 512 KB ECC-protected Flash, 64 KB SRAM, four operational amplifiers, five comparators, twelve 16-bit timers, nine PWM channels, three QEI modules, three I2S audio interfaces, two CAN-FD ports, USB-FS, and 5V-tolerant I/O with up to 22 mA source/sink. The on-chip 12-bit ADC reaches 3.75 MSPS with up to 28 analog inputs. The integrated op-amps and comparators eliminate external analog signal conditioning in FOC motor-drive stages, reducing BOM and PCB area while preserving signal integrity. The device implements the microAptiv MCU core with a 5-stage pipeline, hardware multiply-divide, and DSP extensions. ECC on Flash and RAM improves reliability in long-lifetime industrial deployments. The motor-control PWM block supports center-aligned, edge-aligned, and multi-phase modes with sub-microsecond edge resolution, while the QEI module accepts A/B/index signals from incremental encoders for field-oriented control. Multiple DMA channels offload data movement for high-speed ADC sampling, freeing the CPU for control algorithms. Typical applications include brushless DC motor drives, industrial PLCs, IIoT edge nodes, servo amplifiers, and multi-channel data-acquisition systems. Designers also deploy this MCU in solar inverters, factory automation controllers, and CAN-FD-connected sensor hubs. The combination of motor-control peripherals and CAN-FD makes it a strong fit for Industry 4.0 distributed control nodes. When designing with this MCU, plan for a 3.0V-3.6V supply, route the analog and digital grounds with separate pours that join at a single point, and place bypass capacitors within 5 mm of every VDD/VSS pin. Decoupling for the ADC reference pin requires a low-ESR ceramic capacitor; noisy switching regulators near the analog section will degrade ADC SNR. The 120 MHz operation also benefits from a 4-layer PCB stack-up to control impedance on USB and CAN-FD lines. This page synthesizes distributor pricing, drop-in alternatives, application guidance, and design notes that are not consolidated in the manufacturer datasheet.

견적 요청 문의하기
PIC32MK0512MCJ064-I/R4X - 120MHz MCU 512KB Flash 64-VQFN | Microchip
PIC32MK0512MCJ064-I/R4X

PIC32MK0512MCJ064-I/R4X - 120MHz MCU 512KB Flash 64-VQFN | Microchip

The Microchip Technology PIC32MK0512MCJ064-I/R4X is a 32-bit MIPS32 microAptiv RISC microcontroller running at up to 120 MHz, integrating 512 KB of ECC-protected Flash and 64 KB of SRAM in a 64-pin VQFN (9x9 mm) package. The I/R4X suffix denotes the industrial temperature range (-40C to +85C) and a tape-and-reel packaging variant with the same die as other PIC32MK0512MCJ064 variants. A rich motor-control and connectivity peripheral set makes this MCU a strong fit for high-performance embedded designs. What is a PIC32MK microcontroller? The PIC32MK family from Microchip is a 32-bit microcontroller line based on the MIPS32 microAptiv core. The family sits within the broader taxonomy of microcontroller -> embedded controller -> MCU -> 32-bit MCU -> MIPS-based MCU -> Microchip PIC32. The microAptiv core supports MicroMIPS compressed instruction mode for up to 40% smaller code size, includes a single-precision hardware Floating Point Unit (FPU), four 64-bit accumulators, and a single-cycle MAC that supports saturating and fractional math - features that position PIC32MK at the high end of the PIC32 portfolio alongside dsPIC signal controllers. Key features of the PIC32MK0512MCJ064 include 512 KB of Flash with Error Correction Code (ECC), 64 KB of SRAM, four general-purpose 16-bit timers, and a 12-bit ADC module with up to 30 analog input channels suited for multi-phase motor current sampling. The device integrates CAN-FD controllers, multiple SPI/I2S/I2C interfaces (using updated Host/Client terminology in the latest datasheet revision), five UART modules, and a motor-control PWM peripheral set. The 64-pin VQFN package with exposed pad provides good thermal dissipation for the 120 MHz operation. Technically, the PIC32MK architecture leverages a Harvard memory topology with separate buses for instruction and data fetch, allowing simultaneous access and improved throughput versus Von Neumann designs. The hardware FPU accelerates IEEE-754 single- and double-precision math, which simplifies control-loop code for vector control of three-phase motors and supports sensorless field-oriented control (FOC) algorithms without software emulation overhead. ECC on the Flash reduces soft-error risk in industrial environments, while the four 64-bit accumators and DSP extensions accelerate FIR/IIR filters and PID calculations. Typical applications include BLDC and PMSM motor drives, industrial automation PLCs, multi-channel data acquisition systems, building automation controllers, and Industrial Internet of Things (IIoT) edge nodes. The combination of CAN-FD, motor-control PWMs, and 30 ADC channels is specifically engineered for triple-axis or multi-axis motor control where sensor feedback, commutation timing, and inter-node communication must converge on a single device. When designing with this MCU, confirm that the 9x9 mm VQFN PCB footprint and the I-grade temperature range match your application's environment. For debug, the PIC32MK is supported by Microchip's MPLAB X IDE and programmers such as ICD4, PK4, and the older ICD3 - power the target externally during debug sessions to avoid brown-out glitches. This page synthesizes distributor pricing, drop-in alternative variants within the same PIC32MK family, and practical design notes not found in the standalone manufacturer datasheet.

견적 요청 문의하기
PIC32MK0512MCJ064T-E/PT - 120MHz MCU 512K Flash Motor Control | Microchip
PIC32MK0512MCJ064T-E/PT

PIC32MK0512MCJ064T-E/PT - 120MHz MCU 512K Flash Motor Control | Microchip

The Microchip Technology PIC32MK0512MCJ064T-E/PT is a 32-bit MIPS32 microAptiv microcontroller operating at up to 120 MHz, integrating 512 KB of ECC-protected Flash and 64 KB of SRAM in a 64-pin TQFP (PT) package rated -40C to +125C. The 'E' suffix indicates the extended industrial temperature grade while 'T' denotes tape-and-reel packaging, and the part is built around a 120 MHz core combined with a motor-control-optimized peripheral set including 9 PWM channels, 3 QEI modules, 5 analog comparators, and 3 I2S/SSI interfaces for digital audio or converter loops. A 32-bit microcontroller (MCU) is a single-chip processor that integrates a CPU core, program Flash, data RAM, and a heterogeneous mix of peripherals (timers, ADC, communication controllers, PWM) on one die. PIC32MK devices target deterministic real-time control loops that benefit from a RISC core, deterministic interrupt latency, hardware motor-control peripherals, and CAN-FD networking for industrial and automotive-grade embedded systems. Key features include 8 DMA channels for offloading CPU data movement, 12 general-purpose timers, dual 12-bit ADC subsystems, multiple UART/SPI/I2C interfaces, dedicated CAN-FD controllers, and a 5V-tolerant I/O structure that simplifies interfacing to industrial sensors and gate drivers. ECC on Flash and parity on RAM increase functional safety for long-lifetime industrial deployments. The PIC32MK MCJ variant emphasizes motor control: three independent QEI modules allow simultaneous dual/three-shunt FOC of two brushless motors, while the 9 PWM outputs (with complementary mode and dead-time insertion) drive half-bridges directly. Combined with the 5V I/O and 120 MHz CPU, the architecture removes the need for an external DSP or FPGA in mid-complexity drives. Typical applications include sensorless and sensored BLDC/PMSM motor drives, industrial PLCs, building-automation fans and pumps, robotics joint controllers, and IIoT edge nodes with CAN-FD backbones. The wide temperature range and ECC Flash also make it a fit for outdoor or ruggedized equipment. When designing with this part, validate the power-budget for the two ADC rails (use separate AVdd/AVss pins and a ferrite bead) and place a 0.1 uF + 10 uF decoupling pair within 5 mm of every Vdd/Vss pair. Reserve the ICSP pins on production boards for in-field firmware updates if your service model requires them. This page synthesizes distributor pricing, drop-in same-package alternatives, and application-level design notes that complement (but do not replace) the manufacturer datasheet DS60001570.

견적 요청 문의하기
PIC32MK0512MCJ064T-E/R4X - 32-bit MCU 120MHz 512KB Flash | Microchip
PIC32MK0512MCJ064T-E/R4X

PIC32MK0512MCJ064T-E/R4X - 32-bit MCU 120MHz 512KB Flash | Microchip

The Microchip Technology PIC32MK0512MCJ064T-E/R4X is a 32-bit MIPS32 microAptiv MCU with FPU/DSP running up to 120 MHz, integrating 512 KB of ECC-protected Flash and 64 KB SRAM, housed in a 64-pin VQFN (9x9 mm) package. The variant suffix "T-E" denotes tape-and-reel packaging and an extended -40C to +125C operating temperature grade, while the family integrates dedicated motor-control PWMs, 12-bit high-speed ADCs, analog comparators, and CAN-FD for industrial networking. A 32-bit microcontroller (MCU) is an embedded computing device that integrates a processor core, program memory (Flash), data memory (SRAM), and a rich set of peripherals (ADC, PWM, timers, communication controllers) on a single silicon die. The PIC32MK family is positioned within Microchip's broader MCU hierarchy as an MIPS-based high-performance tier above PIC24 and dsPIC33 parts, and below standalone MPU solutions, targeting motor control, industrial control, and Industrial IoT (IIoT) edge nodes. Key features include an integrated single-precision/double-precision Floating Point Unit (FPU) and DSP engine with four 64-bit accumulators and single-cycle MAC, accelerating closed-loop control loops. The peripheral set includes multiple 12-bit ADC cores with up to 3.75 Msps conversion, dedicated motor-control PWM modules with complementary outputs and dead-time insertion, CAN-FD, USB, and a rich analog comparator block. On-chip ECC protects Flash against bit-flip faults common in industrial environments. MicroMIPS compressed-mode instruction support delivers approximately 40% smaller code size versus standard MIPS32, increasing effective Flash utilization. The VQFN-9x9 package exposes the central thermal pad for low-impedance PCB heat spreading, sustaining full 120 MHz operation across industrial temperatures. Typical applications include 3-phase BLDC/PMSM motor drives, field-oriented control (FOC) inverter boards, industrial PLCs with CAN-FD, and IIoT sensor hubs. The combination of CAN-FD, high-resolution PWM, and dual ADC cores makes the part well-suited to real-time multi-axis motion controllers. When designing with this device, allocate PCB copper under the exposed pad to a continuous inner-plane pour rated to dissipate approximately 2 W continuous at 120 MHz full load. Plan for at least two independent 3.3V decoupling bulk capacitors near the VDD/VSS pin pairs. This page synthesizes distributor pricing, drop-in alternatives, and practical design notes not found on the manufacturer datasheet.

견적 요청 문의하기
PIC32MK0512MCJ064T-I/PT - 120MHz 512KB MCU Motor Control TQFP-64
PIC32MK0512MCJ064T-I/PT

PIC32MK0512MCJ064T-I/PT - 120MHz 512KB MCU Motor Control TQFP-64

The Microchip Technology PIC32MK0512MCJ064T-I/PT is a 32-bit microcontroller based on the MIPS32 microAptiv core running at 120 MHz, integrating 512 KB of Flash memory and 64 KB of RAM in a 64-pin TQFP (10x10 mm) package. The device combines a single-precision/double-precision Floating Point Unit (FPU), four 64-bit accumulators, a single-cycle MAC supporting saturating and fractional math, and a MicroMIPS mode that delivers approximately 40 percent smaller code size than standard MIPS32. The -I suffix indicates the industrial temperature range of -40C to +85C. A microcontroller (MCU) is a single-chip computer that integrates a CPU core, program and data memory, and a rich peripheral set for embedded control. The PIC32MK family sits in the upper tier of Microchip's 32-bit MCU portfolio, sitting in the hierarchy 32-bit MCU -> MCU -> microcontroller -> embedded IC -> semiconductor, and is engineered for hard-real-time applications where deterministic interrupt latency and high-throughput signal processing are required. Compared with 8-bit or 16-bit MCUs, a 32-bit MIPS core with FPU and DSP extensions executes control loops in far fewer cycles, enabling tighter torque and current loops in motor drives. Key features of the PIC32MK0512MCJ064T-I/PT include: 512 KB ECC-protected Flash, 64 KB SRAM, a CAN-FD controller, three CAN modules, multiple I2C and UART channels, 8 DMA channels, 12 timers, 9 PWM channels tailored for motor control, 3 QEI (Quadrature Encoder Interface) modules, 5 comparators and 3 I2S interfaces for digital audio. The 5V-tolerant I/Os support up to 22 mA source/sink, and every I/O pin can generate an external interrupt. Five additional programmable edge/level-triggered interrupt pins support Class B safety requirements. Architecturally, the PIC32MK combines a high-speed analog front end with high-resolution PWM and dedicated QEI blocks, making it a single-chip solution for Field-Oriented Control (FOC) of BLDC and PMSM motors. The integrated FPU and DSP extensions allow floating-point and fractional control loops without sacrificing interrupt response time, while the ECC-protected Flash improves functional safety for industrial and automotive subsystems. Typical applications include Field-Oriented Control motor drives, industrial PLCs, robotics and CNC machines, solar inverters and power conversion stages, CAN-FD networked sensors, and IIoT edge nodes. Its combination of DSP math, motor-control peripherals, and CAN-FD connectivity suits multi-axis motion systems where deterministic timing is essential. When designing with this MCU, allocate separate decoupling capacitors near each power pin pair, follow Microchip's QFP layout guidelines for thermal and signal-integrity performance, and use the MPLAB Harmony Code Configurator (MCC) with the Motor Control Framework for production-grade FOC firmware development. This page synthesizes distributor pricing, parametric comparisons with same-family PIC32MK MCUs, and practical design guidance not found in the manufacturer datasheet.

견적 요청 문의하기
PIC32MK0512MCJ064T-I/R4X - 120MHz 32-bit MCU with 512KB Flash | Microchip
PIC32MK0512MCJ064T-I/R4X

PIC32MK0512MCJ064T-I/R4X - 120MHz 32-bit MCU with 512KB Flash | Microchip

The Microchip Technology PIC32MK0512MCJ064T-I/R4X is a 32-bit MIPS32 microAptiv microcontroller IC operating at 120MHz with 512KB of ECC-protected Flash memory and 64KB of SRAM, housed in a 64-pin VQFN (9x9 mm) package. It integrates a single-precision/double-precision hardware Floating Point Unit (FPU), a DSP engine with four 64-bit accumulators, and single-cycle MAC support, making it a strong fit for high-performance motor control and Industrial IoT (IIoT) applications. The operating voltage range is 2.3V to 3.6V, and the industrial temperature grade (-40C to +85C) supports factory-floor and field-deployed designs. A microcontroller (MCU) is an integrated circuit that combines a CPU core, program memory (Flash), data memory (RAM), and a rich set of on-chip peripherals (timers, ADC, PWM, communication controllers) on one silicon die. PIC32MK MCUs sit within the broader taxonomy of microcontrollers -> 32-bit MCUs -> MIPS-based MCUs -> PIC32 family -> PIC32MK sub-family. They target deterministic real-time control tasks where floating-point math, CAN-FD communication, and high-resolution PWM are required simultaneously. Key features include up to 120MHz CPU clock, 512KB ECC Flash, 64KB SRAM, dedicated motor-control peripherals such as multi-channel high-resolution PWM, quadrature encoder interfaces (QEI), and operational amplifiers on-chip for current sensing. The device also provides 12-bit ADC channels (multiple of them for multi-phase current sampling), CAN-FD, I2C, SPI, UART, and I2S interfaces for connectivity and audio bridging. ECC on Flash improves reliability in harsh industrial environments by detecting and correcting bit errors. Typical applications span BLDC and PMSM motor drives, industrial PLC modules, IIoT sensor hubs, multi-channel data acquisition systems, and digital power conversion controllers. The combination of FPU + DSP MAC enables field-oriented control (FOC) loops to run at high PWM frequencies without offloading to a separate DSP. When designing with this device, ensure that the 64-pin VQFN exposed pad is soldered to a sufficient ground copper pour (at least 1 sq inch) for thermal dissipation; the R4X (VQFN-64) variant requires careful PCB layout to maximize the thermal pad connection. The device supports the MPLAB Harmony v3 software framework with motor-control libraries. This page synthesizes distributor pricing, drop-in same-package alternatives, and practical design notes not found in the manufacturer datasheet.

견적 요청 문의하기
PIC32MK0512MCM064-E/MR - 32-bit 120MHz MCU, 512KB Flash | Microchip
PIC32MK0512MCM064-E/MR

PIC32MK0512MCM064-E/MR - 32-bit 120MHz MCU, 512KB Flash | Microchip

The Microchip PIC32MK0512MCM064-E/MR is a 32-bit MIPS32 microAptiv PIC microcontroller running at 120 MHz with 512 KB of ECC-protected Flash, packaged in a 64-pin QFN (9x9 mm). It integrates DSP extensions, a single-precision hardware Floating Point Unit, four 64-bit accumulators and single-cycle MAC supporting saturating and fractional math, positioning it as a high-performance MCU for motor control and industrial applications. A microcontroller (MCU) is a single-chip computer that integrates a CPU core, program memory (Flash), working memory (RAM), and programmable peripherals. The PIC32MK family sits within the broader PIC32 family of 32-bit microcontrollers, descended from the MIPS32 architecture and augmented with Microchip-specific peripherals. MCUs form the embedded control layer beneath real-time operating systems and firmware, executing deterministic code that drives sensors, motors, communication buses and human-machine interfaces. Key features of this device include 512 KB of dual-panel Flash with ECC, 128 KB of SRAM, a 12-bit ADC with up to 42 analog inputs, motor-control PWMs with high-resolution edge placement, USB Full Speed, CAN-FD, multiple UART/SPI/I2C channels, and a wide set of timers. The QFN-64 (9x9) footprint exposes the full peripheral set while keeping the board area compact for dense designs. Technically, the microAptiv core supports the MicroMIPS ISA for up to 40% smaller code size versus pure 32-bit mode, paired with a 5-stage pipeline and a tightly-coupled instruction cache. The DSP/FPU engine accelerates single-precision math and single-cycle MAC operations, enabling high-bandwidth control loops. Memory protection, ECC on Flash and a flexible interrupt controller support IEC 61508-class functional safety integrations. Typical applications include field-oriented control (FOC) of three-phase PMSM and BLDC motors, industrial servo drives, solar inverters, PLCs, building automation, multi-channel data acquisition, and IIoT edge nodes. The combination of CAN-FD, USB and high-resolution PWMs makes the part especially attractive for connected motor nodes. When designing with this part, ensure the four VDD/VSS pairs are each decoupled with 100 nF + bulk capacitance placed close to the pins. The high-resolution PWM requires careful grounding and short return paths to the gate drivers to avoid jitter, and unused pins should be configured as outputs to minimize current draw. This page synthesizes distributor pricing, drop-in same-package alternatives, application pairings, and practical design notes that go beyond the manufacturer datasheet itself, helping engineers evaluate fit quickly.

견적 요청 문의하기
PIC32MK0512MCM064-E/PT - 120MHz 512KB Flash MCU | Microchip
PIC32MK0512MCM064-E/PT

PIC32MK0512MCM064-E/PT - 120MHz 512KB Flash MCU | Microchip

The Microchip Technology PIC32MK0512MCM064-E/PT is a 32-bit MIPS32 microAptiv microcontroller IC running at 120 MHz, integrating 512 KB of ECC-protected Flash, a single-precision/double-precision hardware Floating Point Unit (FPU), and the DSP extensions that define the PIC32MK Motor Control family. It is housed in a 64-pin TQFP (10x10 mm) package and operates across the extended -40C to +125C industrial temperature range, sufficing for both industrial motor drive and ruggedized consumer designs. A microcontroller (MCU) is a single-chip computer that integrates a CPU core, program memory (Flash), data memory (RAM), and a programmable peripheral set into one device. The PIC32MK family sits in the hierarchy PIC32MK -> PIC32 -> 32-bit MCU -> microcontroller -> embedded semiconductor, and combines DSP-grade math throughput with high-resolution analog and motor-control-oriented timers for closed-loop field-oriented control (FOC) of PMSM, BLDC, and ACIM motors. Key features include four 64-bit accumulators for high-dynamic-range DSP, single-cycle multiply-accumulate (MAC) supporting saturating and fractional math, a 12-bit ADC with up to 42 analog inputs and a 3.4 MSPS conversion rate, four op-amps and three analog comparators for current sensing, dedicated PWM modules with 2.5 ns PWM resolution, USB 2.0 Full-Speed, two CAN-FD ports, six UART, four SPI, and four I2C interfaces. MicroMIPS mode delivers up to 40% smaller code footprint versus pure MIPS32. On the architecture side, the microAptiv core delivers 1.52 DMIPS/MHz and 4.10 CoreMark/MHz, while ECC on both Flash and RAM enables ISO 26262-style functional-safety roadmaps. The device also integrates a 32 KB instruction cache and 4 KB RAM cache that mitigate Flash wait-state penalties at the full 120 MHz clock. Typical applications include industrial motor drives (FOC, PFC, sensorless control), solar inverters, multi-channel industrial sensing, IIoT edge controllers, and digital power supplies with high-resolution analog feedback. The combination of CAN-FD and USB makes the part well suited as the communications hub of a factory-floor node. When designing with this part, pay attention to decoupling: place 100 nF X7R bypass capacitors within 2 mm of every VDD/VSS pair, and bulk-decouple each rail with 4.7 uF ceramic plus a 10 uF tantalum. Use the dedicated analog AVdd/AVss pair with its own ferrite-bead isolation when ADC accuracy matters, and route PGECx/PGEDx pairs as length-matched differential traces for clean in-circuit serial programming. This page synthesizes distributor pricing, drop-in PIC32MK alternatives, and practical design notes not found in the manufacturer datasheet alone, helping engineers select the right variant and shorten their qualification cycle.

견적 요청 문의하기
PIC32MK0512MCM064-I/MR - 120MHz MCU, 512KB Flash, 64-QFN | Microchip
PIC32MK0512MCM064-I/MR

PIC32MK0512MCM064-I/MR - 120MHz MCU, 512KB Flash, 64-QFN | Microchip

The Microchip Technology PIC32MK0512MCM064-I/MR is a 32-bit microcontroller from the PIC32MK family, built on the MIPS32 microAptiv core with an integrated single/double-precision Floating Point Unit (FPU), running at up to 120 MHz, and packaged in a 64-pin QFN (9x9 mm) with 512 KB of ECC-protected dual-panel Flash memory. It targets motor control, Industrial Internet of Things (IIoT), industrial automation and precision analog applications. A microcontroller (MCU) is a single-chip computer that integrates a CPU core, program memory (Flash), data memory (RAM), and a rich set of peripherals such as timers, ADCs, communication controllers, and GPIO. PIC32MK MCUs sit within Microchip's 32-bit PIC microcontroller hierarchy as PIC32 (32-bit) -> PIC32MK sub-family -> MCM (Motor Control with CAN FD) device class. They extend traditional 8-bit PIC and 16-bit PIC dsPIC devices into applications that need DSP-class computation, FPU math, and deterministic motor-control PWM generation. Key features of the PIC32MK0512MCM064-I/MR include four 64-bit accumulators with single-cycle MAC, MicroMIPS mode for roughly 40% smaller code size, USB Full-Speed, CAN-FD, up to 12-bit ADC with multiple SAR cores, and motor-control PWMs optimized for field-oriented control (FOC). The device operates from 2.3 V to 3.6 V and supports an industrial temperature range of -40C to +85C in the -I grade. The 512 KB ECC Flash and 64 KB+ RAM configuration give headroom for complex state machines and protocol stacks. The PIC32MK silicon uses a 5-stage pipeline microAptiv core with hardware DSP extensions and a dedicated FPU that accelerates single and double precision IEEE-754 math. Dual-panel Flash allows live updates without downtime, while ECC protection guards against bit flips in harsh industrial environments. The integrated analog includes multiple 12-bit ADC modules with shared cores suitable for simultaneous current and voltage sampling used in FOC motor loops. Typical applications include industrial motor drives (BLDC, PMSM, ACIM), robotic and CNC controllers, PLC I/O modules, solar inverters, building automation, IIoT edge nodes, and USB/CAN-FD connected industrial sensors. The combination of DSP, FPU, and high-resolution PWM is particularly well-suited to sensorless FOC implementations requiring deterministic loop times. When designing with this part, allocate the 64-QFN thermal pad to a continuous ground copper pour to meet the 120 MHz dissipation envelope, and consult the PIC32MK Motor Control Family datasheet (DS60001570D) for PWM/ADC synchronization timing. Verify that your toolchain supports the MCM variant (XC32 compiler v2.50+ recommended) before committing to the FPU/DSP pipeline. This page synthesizes distributor pricing, drop-in same-package alternatives from the PIC32MK family, and practical design notes not found in the manufacturer datasheet alone.

견적 요청 문의하기
PIC32MK0512MCM064T-E/MR - 120MHz MCU, 512KB Flash, 64-QFN | Microchip
PIC32MK0512MCM064T-E/MR

PIC32MK0512MCM064T-E/MR - 120MHz MCU, 512KB Flash, 64-QFN | Microchip

The Microchip PIC32MK0512MCM064T-E/MR is a 32-bit MIPS32 microAptiv PIC32MK microcontroller running at 120 MHz, integrating 512 KB of ECC-protected Flash and 64 KB SRAM into a 64-pin 9x9 mm QFN package. It is part of the PIC32MK Motor Control (MCM) family and combines a Floating Point Unit (single/double precision), MicroMIPS compressed-code mode, four 64-bit accumulators, and a single-cycle MAC engine for high-performance motor control and DSP workloads. A 32-bit microcontroller is a programmable processor with a 32-bit data path, on-chip Flash program memory, RAM, and integrated peripherals such as ADC, PWM, CAN, USB, and timers. Within the semiconductor taxonomy, MCUs sit below microprocessors (MPUs) and above simple 8/16-bit controllers; the PIC32MK family targets deterministic real-time control with DSP-class math, positioned above PIC24/PIC16 and below higher-end Cortex-M7/i.MX RT-class parts in capability. Key features include USB 2.0 Full-Speed with on-chip transceiver, dual CAN-FD controllers, a 12-bit 3.75 Msps ADC with up to 24 channels, multiple PWM channels with 250 ps resolution, four op amps for current sensing, four 16-bit analog comparators, and a 64-pin QFN footprint that exposes a rich peripheral set. ECC on Flash and SRAM improves reliability in industrial and automotive-adjacent environments. The device uses a Harvard architecture with separate program and data paths and an FPU for floating-point motor-control algorithms. The PIC32MK MCM silicon integrates dedicated motor-control peripherals such as high-resolution PWM and synchronized ADCs, allowing field-oriented control (FOC) loops to close in microseconds. Operates from 2.3 V to 3.6 V. Typical applications include BLDC/PMSM motor drives (drones, e-bikes, industrial servos), solar inverters, industrial PLCs, IIoT sensor nodes, and USB/CAN-FD connected industrial control boards. Pair with Microchip's MPLAB X IDE and MCC code configurator for fast bring-up. Trade-off: at 120 MHz the 64-pin QFN dissipates moderate power; designers must keep total IO current under the 150 mA rail budget when sinking many GPIOs simultaneously. This page synthesizes distributor stock, drop-in PIC32MK family alternatives, datasheet-block pinout, and engineering design notes not found on the manufacturer summary page.

견적 요청 문의하기
PIC32MK0512MCM064T-E/PT - 120MHz 512KB MCU, USB FS, CAN-FD | Microchip
PIC32MK0512MCM064T-E/PT

PIC32MK0512MCM064T-E/PT - 120MHz 512KB MCU, USB FS, CAN-FD | Microchip

The Microchip Technology PIC32MK0512MCM064T-E/PT is a 32-bit MIPS32 microAptiv microcontroller IC running at 120 MHz with 512 KB of ECC-protected Flash memory, housed in a 64-pin TQFP (10x10 mm) package. It combines a single-precision/double-precision hardware Floating Point Unit (FPU), MicroMIPS compressed code mode for up to 40% code-size reduction, four 64-bit accumulators, and single-cycle MAC with saturating and fractional math support, making it a true DSP-grade MCU for closed-loop control. A microcontroller (MCU) is a single-chip computer that integrates a CPU core, non-volatile program memory (Flash), volatile working memory (SRAM), and a rich set of peripherals (timers, ADC, communication controllers, GPIO) into one IC. Within the embedded-semiconductor hierarchy, the PIC32MK family sits between general-purpose Cortex-M MCUs and DSP microcontrollers, targeting deterministic motor control, digital power conversion, and Industrial IoT applications where floating-point precision, ECC memory, and CAN-FD connectivity are mandatory. This part is the Flash-based, ECC-enabled "MCM" variant (Motor Control / Connectivity / Memory). Key features of the PIC32MK0512MCM064T-E/PT include: a 120 MHz core with hardware FPU, 512 KB dual-panel ECC Flash plus 64 KB ECC RAM, USB Full-Speed device/host, two CAN-FD controllers, multiple 12-bit ADC modules (multi-MSPS capable for current sampling), high-resolution PWM outputs targeting motor-control and digital-power topologies, and a wide operating voltage range suitable for 3.3 V industrial rails. The 64-pin TQFP (PT) package gives enough I/O for multi-axis FOC motor drives while remaining hand-solderable on 4-layer FR-4. Architecturally, the PIC32MK uses a 5-stage MIPS32 microAptiv core with a tightly-coupled DSP engine and an enhanced Interrupt Controller. The dual-panel Flash architecture supports live firmware updates without CPU stall, while ECC on both Flash and SRAM protects against bit-flips in harsh industrial environments. The peripherals (PWM, ADC, op-amps, comparators) are interconnected through a high-bandwidth peripheral bus, minimizing latency between current sensing and PWM update - critical for sub-microsecond FOC loops. Typical applications include 3-phase BLDC/PMSM and ACIM motor control (field-oriented control), industrial servo drives, solar inverters and digital power supplies, Industrial IoT gateways, and automotive body/comfort ECUs. The combination of FPU + DSP + ECC + CAN-FD + USB FS makes it particularly suited to functional-safety-oriented industrial designs. When designing with this device, pay special attention to decoupling (the high-speed ADC and PWM generate fast transients), PCB thermal layout (the TQFP-64 has a sizeable thermal pad on the lead frame), and the dual-panel Flash programming flow for field-upgradable firmware. MPLAB Harmony 3 and MCC provide peripheral libraries and motor-control examples that shorten development time. This page synthesizes distributor pricing, drop-in same-family alternatives, and engineering design notes beyond the manufacturer datasheet to accelerate component selection and procurement.

견적 요청 문의하기
PIC32MK0512MCM064T-I/MR - 120MHz MCU 512KB Flash 64-QFN | Microchip
PIC32MK0512MCM064T-I/MR

PIC32MK0512MCM064T-I/MR - 120MHz MCU 512KB Flash 64-QFN | Microchip

The Microchip PIC32MK0512MCM064T-I/MR is a high-performance 32-bit MIPS32 microAptiv microcontroller running at 120 MHz, with 512 KB of ECC-protected Flash and a Floating Point Unit (FPU) for single/double precision operations, housed in a 64-pin QFN (MR) 9x9 mm package. It integrates 49 I/O pins, USB Full-Speed, CAN-FD, multiple 12-bit ADCs, and DSP extensions (four 64-bit accumulators and single-cycle MAC), making it tailored for motor control, digital power, and Industrial IoT. A microcontroller (MCU) is an integrated circuit that combines a CPU core, volatile memory (RAM), non-volatile memory (Flash/ROM), and peripherals on a single silicon die. MCUs sit at the lowest tier of the embedded computing hierarchy: MCU -> microcontroller -> embedded processor -> system-on-chip (SoC). Within the MCU taxonomy, the PIC32MK family belongs to the 32-bit class, sharing lineage with ARM Cortex-M devices but using the MIPS32 instruction set with DSP extensions for deterministic real-time control. The FPU enables efficient floating-point math, while ECC-protected Flash ensures reliability in safety-critical applications. Key features include a 120 MHz MIPS32 microAptiv core with FPU and DSP extensions (MicroMIPS for 40% smaller code, four 64-bit accumulators, single-cycle saturating MAC), 512 KB ECC Flash, and 64 KB RAM. The 64-pin QFN package provides compact footprint for space-constrained designs, while peripherals include USB Full-Speed, CAN-FD, multiple 12-bit ADCs, configurable logic cells, and motor-control PWMs. The device supports -40C to +85C industrial temperature range. The architecture combines high-performance scalar processing with deterministic DSP, allowing simultaneous motor control loops and communication stack execution. The 12-bit ADC and dedicated PWM peripherals enable precise field-oriented control (FOC) of three-phase motors, while CAN-FD and USB-FS enable industrial networking and diagnostics. ECC Flash and a Class-B Safety Library support functional safety compliance. Typical applications include BLDC/PMSM motor drives (FOC algorithms benefit from DSP extensions), industrial automation controllers (CAN-FD networking), digital power conversion (high-resolution PWM and ADC), and Industrial IoT edge nodes (USB-FS for commissioning, CAN-FD for backhaul). Design tip: route the exposed thermal pad to a continuous ground plane to dissipate switching losses and reduce junction temperature during high-duty motor drive operation. This page synthesizes distributor pricing, same-family drop-in alternatives, and application-specific design guidance not aggregated on the manufacturer datasheet alone.

견적 요청 문의하기
PIC32MK0512MCM064T-I/PT - 120MHz MCU 512KB Flash Motor Control TQFP-64
PIC32MK0512MCM064T-I/PT

PIC32MK0512MCM064T-I/PT - 120MHz MCU 512KB Flash Motor Control TQFP-64

The Microchip PIC32MK0512MCM064T-I/PT is a 32-bit microcontroller built around the MIPS32 microAptiv core running at 120 MHz, integrating a single/double-precision Floating Point Unit (FPU), four 64-bit accumulators, and single-cycle saturating/fractional MAC, in a 64-pin TQFP (10x10 mm) package. It provides 512 KB of ECC-protected dual-panel Flash, 64 KB of RAM, and a peripheral set explicitly engineered for motor control, digital power, and Industrial IoT (IIoT) edge nodes. A 32-bit MCU is a microcontroller whose datapath, registers, and arithmetic logic unit are 32 bits wide, allowing a single cycle to operate on larger data words than 8-bit or 16-bit MCUs. The PIC32MK family extends this with a hardware FPU and DSP extensions (MAC, accumulators), placing it in the hierarchy: 32-bit MCU -> MIPS32 microAptiv core -> PIC32MK family -> motor-control sub-family. This architectural depth lets designers replace DSP+MCU dual-chip designs with a single device running vector and field-oriented control loops at full rate. Key differentiating features are the four 12-bit ADCs with up to 42 analog input channels, dedicated high-resolution PWM outputs for motor control (typically 7 pairs at >2 ns resolution), four CAN-FD controllers, USB Full-Speed, and an integrated Crypto engine. The device is rated for the industrial -40C to +85C operating range and ships as RoHS-compliant with 100% Pb-free (T) tape-and-reel packaging per the part suffix. The microAptiv pipeline combined with dual-panel Flash enables live Flash update without CPU stall, an essential capability for IIoT gateways that must upgrade firmware in the field without downtime. The dual-panel Flash architecture and ECC error correction further reduce the chance of bit-flip-induced field failures in motor-drive systems exposed to electrical noise. Typical applications include sensorless field-oriented control (FOC) of PMSM and BLDC motors, industrial servo drives, multi-channel power-conversion digital controllers, USB-connected IIoT edge nodes, and automotive body/comfort subsystems requiring CAN-FD. The combination of four independent CAN-FD ports and a USB FS device/host stack is particularly attractive in gateway designs that bridge industrial fieldbus and USB diagnostics. When designing with this part, plan the PCB thermal budget around 0.65 W typical dissipation; place a continuous ground plane under the TQFP-64 and reserve at least four 12 mil thermal vias under the exposed die pad. Do not route the high-resolution PWM outputs near analog ADC traces - capacitive coupling can degrade the 12-bit ADC SNR below datasheet guarantees. This page synthesizes verified distributor pricing across DigiKey, Mouser, Octopart and others, drop-in same-package alternatives from the PIC32MK family, and practical motor-control design notes that complement the manufacturer datasheet.

견적 요청 문의하기
PIC32MK0512MCM100-E/PT - 120MHz MCU 512KB Flash 100-TQFP | Microchip
PIC32MK0512MCM100-E/PT

PIC32MK0512MCM100-E/PT - 120MHz MCU 512KB Flash 100-TQFP | Microchip

The Microchip Technology PIC32MK0512MCM100-E/PT is a 32-bit microcontroller built on the MIPS32 microAptiv core, operating at up to 120MHz with 512KB of Flash and 128KB of SRAM, housed in a 100-pin TQFP (12x12mm) package. The device integrates a Floating Point Unit for single and double precision math, four 64-bit accumulators, single-cycle MAC operations, and MicroMIPS mode for 40% smaller code size, making it well suited for DSP-intensive motor control and industrial applications. A microcontroller (MCU) is an integrated circuit that combines a CPU core, memory, and programmable peripherals on a single die. The PIC32MK family extends the PIC32 architecture into motor-control and industrial-control segments by pairing the microAptiv core with a rich peripheral set including CAN-FD, USB, 12-bit ADCs with up to 6 MSPS, and high-resolution PWM. Within the broader taxonomy, MCUs belong to microprocessors -> semiconductors -> integrated circuits. Key features include 78 I/O pins, 2x USB, 2x CAN-FD, a 4-channel 12-bit ADC at up to 6 MSPS with 12-bit DAC, 16-bit timers, op amps, comparators, and ECC-protected Flash for safety-critical code. The extended (-E) temperature range of -40C to +125C supports industrial and automotive under-hood environments. ECC on Flash and RAM increases reliability for long-lifetime industrial deployments. The microAptiv core implements an M-class pipeline with hardware multiply/divide and DSP extensions. MicroMIPS compressed instructions reduce memory footprint while maintaining 32-bit performance. The integrated FPU removes the need for software floating-point emulation in control loops that compute trigonometric or vector transforms in real time. Dual-panel Flash supports live firmware updates without device downtime. Typical applications include BLDC and PMSM motor drives (field-oriented control), industrial PLCs, solar inverters, and IIoT edge nodes. The CAN-FD interface enables modern automotive and factory-floor networks, while the dual-USB supports device/host stacks for diagnostics and firmware loading. On-chip op amps simplify current-sense conditioning in motor-control hardware. When designing with the 100-TQFP, allocate a 4-layer PCB with continuous ground beneath the package, decouple each VDD pin with 100nF X7R plus bulk capacitance near the MCU, and keep the analog AVDD rails RC-filtered to reduce ADC noise coupling. This page synthesizes distributor pricing, drop-in same-package alternatives, and practical design notes drawn from the Microchip PIC32MK GPK/MCM family datasheet to support faster engineering decisions.

견적 요청 문의하기
PIC32MK0512MCM100-I/PT - 120MHz MCU, 512KB Flash, Motor Control | Microchip
PIC32MK0512MCM100-I/PT

PIC32MK0512MCM100-I/PT - 120MHz MCU, 512KB Flash, Motor Control | Microchip

The Microchip Technology PIC32MK0512MCM100-I/PT is a 32-bit microcontroller built on the MIPS32 microAptiv core running at 120 MHz, integrating 512 KB of ECC-protected Flash, 128 KB of RAM, and 4 KB of EEPROM in a 100-pin TQFP (PT) package. It targets motor control and industrial applications, offering a rich peripheral set including USB Full Speed, CAN-FD, 12-bit ADC, motor-control PWMs, and a hardware Floating Point Unit (FPU) for single- and double-precision math. A microcontroller (MCU) is a single-chip computer containing a CPU core, program memory (Flash), working memory (RAM), and integrated peripherals such as timers, communication interfaces, and analog blocks. Within the broader embedded taxonomy, the PIC32MK0512MCM100 sits in the 32-bit high-performance MCU category, which itself belongs to the Microcontrollers > Integrated Circuits family — devices that execute firmware directly from on-chip Flash while interacting with sensors, actuators, and human-machine interfaces in real time. Key features include the single-cycle hardware MAC with four 64-bit accumulators supporting saturating and fractional math, a 120 MHz core that delivers 198 DMIPS performance, dual-panel Flash for concurrent read/erase, and MicroMIPS mode that reduces code size by up to 40%. The integrated FPU accelerates DSP routines critical for field-oriented control (FOC) algorithms. On-board peripherals include multiple 12-bit ADCs with up to 6 Msps sampling, high-resolution PWM outputs, quadrature encoder interfaces, and USB 2.0 Full Speed with on-chip transceiver. The architecture supports deterministic motor-control loops by combining high-resolution PWMs (250 ps resolution), fast ADC triggering, and DMA-driven data movement that keeps the CPU available for control-law computation. ECC on Flash and RAM enhances reliability in industrial environments subject to single-event upsets and voltage transients. Typical applications include AC induction, BLDC, and PMSM motor drives, industrial automation controllers, PLC modules, IIoT edge nodes, and multi-channel data acquisition systems. Design considerations: use the integrated FPU and DMA to offload the CPU during FOC loops, place decoupling capacitors close to each VDD/VSS pair, and follow Microchip AN2580 PCB layout guidelines for mixed-signal motor-control designs.

견적 요청 문의하기
PIC32MK0512MCM100T-E/PT - 120MHz 512KB Flash MCU TQFP-100
PIC32MK0512MCM100T-E/PT

PIC32MK0512MCM100T-E/PT - 120MHz 512KB Flash MCU TQFP-100

The Microchip Technology PIC32MK0512MCM100T-E/PT is a 32-bit MIPS32 microAptiv microcontroller running at 120 MHz with 512 KB of ECC-protected Flash and 128 KB of SRAM, housed in a 100-pin TQFP (12x12 mm) package. It features a floating-point unit (FPU) supporting single and double precision math, four 64-bit accumulators, single-cycle MAC, and a high-performance peripheral set targeting motor control, industrial control and Industrial Internet of Things (IIoT) applications. Microcontrollers (MCUs) are compact, self-contained computing systems integrated on a single silicon die, combining a processor core, program and data memory, and a rich set of on-chip peripherals. The PIC32MK family sits in the broader hierarchy: microcontroller -> embedded MCU -> 32-bit RISC MCU -> MIPS microAptiv MCU -> Microchip PIC32 family. These devices typically govern real-time control loops, sensor acquisition, and communication bridging in industrial and IoT edge nodes. Key features include a USB Full-Speed interface, CAN-FD controllers, multiple 12-bit ADC modules with high-speed capability, motor-control PWM peripherals, and 4 KB of EEPROM emulation. The integrated FPU and DSP extensions deliver deterministic math throughput for field-oriented control (FOC) and digital filtering workloads, while ECC on Flash and RAM improves functional safety in harsh environments. The 120 MHz microAptiv core implements MicroMIPS mode for up to 40% smaller code size compared to standard MIPS32 instructions, allowing the 512 KB Flash to accommodate larger application codebases. The architecture supports saturating and fractional arithmetic natively, which simplifies closed-loop control firmware. Typical applications include three-phase motor drives, industrial PLCs, building automation, IIoT sensor hubs, and multi-channel data-acquisition systems. The combination of CAN-FD, USB and motor-control PWM makes the part a single-chip solution for industrial mechatronics. When designing with this device, ensure the supply rail stays within the 2.3 V to 3.6 V range and that decoupling is placed close to all VDD/VSS pairs. The TQFP-100 footprint gives access to the full peripheral count, but board layout must keep analog and digital grounds separated to preserve ADC accuracy. This page synthesizes distributor pricing, drop-in alternatives drawn from the same PIC32MK family, and practical design notes that go beyond the manufacturer datasheet summary.

견적 요청 문의하기
PIC32MK0512MCM100T-I/PT - 120MHz, 512KB ECC Flash MCU | Microchip
PIC32MK0512MCM100T-I/PT

PIC32MK0512MCM100T-I/PT - 120MHz, 512KB ECC Flash MCU | Microchip

The Microchip Technology PIC32MK0512MCM100T-I/PT is a high-performance 32-bit microcontroller built on the MIPS32 microAptiv core, integrating a hardware Floating Point Unit (FPU) and operating at up to 120 MHz in a 100-pin TQFP (12x12 mm) package. It combines 512 KB of ECC-protected Flash, 128 KB of RAM, four 64-bit accumulators, single-cycle MAC, and MicroMIPS mode for ~40% code compression, targeting motor control and industrial IoT applications. A 32-bit microcontroller is a microprocessor that uses 32-bit-wide data paths, registers, and addresses, enabling higher computational throughput than 8-bit or 16-bit MCUs. Within the broader taxonomy, the PIC32MK is a microcontroller -> embedded MCU -> 32-bit MIPS MCU -> Microchip PIC32 family. This categorization places it as a mid-to-high-tier control-oriented MCU used where DSP-grade math, deterministic real-time response, and rich connectivity (CAN-FD, USB, SQI) are required in a single device. Key features include four CAN-FD controllers, two USB 2.0 Full-Speed OTG ports, four I2C/SPI/I2S peripherals, six UART modules, a 12-bit 5 MSPS ADC with up to 42 analog inputs, four 12-bit DACs, and motor-control PWMs with 100 ps edge resolution. The 120 MHz core delivers 198 DMIPS and supports single-precision and double-precision IEEE-754 floating point. Integrated DSP instructions (DSPASE) accelerate math-heavy control loops without offloading to a co-processor. The device uses a 5-stage pipeline, dual-panel Flash for live-update, and ECC on Flash and RAM to meet IEC 60730 Class B functional safety. Power management includes Idle, Sleep, and Deep Sleep modes with RAM retention, suitable for energy-conscious industrial nodes. Typical applications include field-oriented control (FOC) motor drives, multi-axis servo control, industrial PLCs, factory automation, renewable-energy inverters, and Industrial IoT edge nodes. The wide connectivity set (4x CAN-FD + 2x USB FS) and large SRAM make it suitable for protocol bridging and gateway designs. When designing, allocate sufficient decoupling (100 nF + 4.7 µF near each VDD/VDDIO pin) and follow the trace-length and impedance rules from the package's pinout section. For motor-control layouts, keep the analog ground island separate from switching ground to preserve ADC accuracy. This page consolidates verified distributor pricing, drop-in package equivalents, and engineering guidance that complements the manufacturer datasheet, supporting faster component selection and BOM risk mitigation.

견적 요청 문의하기
PIC32MK1024GPD064-E/PT - 120MHz FPU MCU 1MB Flash TQFP-64 | Microchip
PIC32MK1024GPD064-E/PT

PIC32MK1024GPD064-E/PT - 120MHz FPU MCU 1MB Flash TQFP-64 | Microchip

The Microchip Technology PIC32MK1024GPD064-E/PT is a high-performance 32-bit MIPS32 microAptiv microcontroller with integrated FPU and DSP extensions, delivering up to 120 MHz core clock performance and packaged in a 64-pin TQFP (10x10 mm) industrial/automotive-grade form factor. The device integrates 1 MB of Flash program memory, 256 KB of SRAM, and 4 KB of EEPROM, targeting motor-control and general-purpose embedded applications where DSP throughput, deterministic response, and rich analog integration are required. A microcontroller (MCU) is a single-chip computer that integrates a CPU core, program memory (Flash), data memory (SRAM), and a rich set of peripherals onto one die. The PIC32MK family extends this concept into 32-bit territory with a MIPS32 RISC architecture, FPU, and DSP extensions, placing it in the hierarchy: microcontroller -> 32-bit MCU -> MIPS architecture -> automotive/industrial grade MCU -> motor-control optimized MCU. Compared with 8-bit MCUs, the PIC32MK provides deterministic interrupt latency, hardware DSP for fixed-point math, and analog peripherals co-designed for closed-loop motor control. Key features include 120 MHz maximum core frequency, hardware FPU (single/double precision) and DSP, four 16-bit ADC modules with up to 42 channels and 3.2 MSPS combined throughput, multiple high-speed PWM channels with dead-time insertion for three-phase motor drive, CAN-FD controllers, USB-FS, and 48 general-purpose I/O pins. The PIC32MK1024GPD064-E/PT is the Extended-temperature (-40C to +125C) and Automotive (AEC-Q100) qualification variant, evidenced by the "E" in the ordering code and Microchip listing it as "Automotive, AEC-Q100". The architecture pairs an MIPS32 microAptiv core with a tightly-coupled 32-channel DMA engine and dual analog front-ends, enabling simultaneous motor control and host telemetry without CPU intervention. ECC-protected Flash supports industrial reliability requirements, and the 3.3 V operating range (2.2 V to 3.6 V wide supply tolerance) is suited to 24V-bus-derived industrial rails. Typical applications include three-phase motor control (BLDC/PMSM), industrial automation PLCs, IoT edge nodes, digital power conversion, and automotive body/ECU subsystems. Per the manufacturer datasheet, this combination of FPU+DSP, CAN-FD, and motor-control PWM is positioned for general purpose and motor control application designs. When designing with this MCU, validate that your compiler toolchain (MPLAB XC32) supports the FPU and DSP extensions, and budget interrupt stack space for the nested vector interrupt controller. Decouple AVDD/VDD separately and use low-impedance ground returns for the PWM outputs to reduce switching noise coupling into the ADC inputs. This page synthesizes distributor pricing, AEC-Q100 alternative comparison, and practical design notes for motor-control and industrial deployments that go beyond the manufacturer datasheet summary.

견적 요청 문의하기
PIC32MK1024GPD064-I/PT - 32-Bit MCU, 120MHz, 1MB Flash, 64-TQFP | Microchip
PIC32MK1024GPD064-I/PT

PIC32MK1024GPD064-I/PT - 32-Bit MCU, 120MHz, 1MB Flash, 64-TQFP | Microchip

The Microchip PIC32MK1024GPD064-I/PT is a high-performance 32-bit microcontroller based on the MIPS32 microAptiv core, operating at up to 120 MHz with an integrated Floating Point Unit (FPU) supporting single and double precision math. The device provides 1 MB of dual-panel Flash memory with Live Update support, 4 KB of EEPROM, and 256 KB of SRAM, all housed in a 64-pin TQFP (10x10 mm) package. It combines this computing performance with a rich set of peripherals targeting motor control, industrial control, and Industrial Internet of Things (IIoT) applications. A 32-bit microcontroller (MCU) is an integrated circuit that combines a 32-bit processor core, program and data memory, and a configurable peripheral set on a single silicon die. Microcontrollers belong to the broader category of embedded processors and microcontrollers, which sit below microprocessors in system hierarchy in that they are designed for deterministic, real-time control tasks rather than general-purpose computing. The PIC32MK family specifically adds a DSP engine, four 64-bit accumulators, and single-cycle MAC support with saturating and fractional math, which accelerates signal-processing and motor-control loops. Key differentiating features include seven 12-bit 3.75 MSPS ADC cores supporting up to 26 analog inputs, four operational amplifiers, and five analog comparators integrated on-chip. The device also offers four 16-bit timers, an 8-channel DMA controller, multiple CAN-FD and USB interfaces, and a QEI peripheral that simplifies field-oriented motor control. MicroMIPS mode reduces code size by approximately 40%, allowing more application code to fit in the 1 MB Flash budget. The dual-panel Flash and Live Update capability let developers run firmware upgrades without halting the application, which is valuable for industrial systems that must remain online. Typical applications include three-phase motor drives (BLDC, PMSM, AC induction), industrial servo control, PLC I/O modules, solar inverters, and IIoT edge nodes that combine analog sensing with deterministic control. The wide operating temperature range and rich analog integration make it well suited to factory automation and ruggedized industrial equipment. When designing with the PIC32MK1024GPD064-I/PT, allocate PCB area for the 64-TQFP footprint and follow Microchip application note guidelines for analog layout, including short traces between op-amp inputs and the dedicated ADC channels. Note that Microchip's recommended alternative for new designs is the PIC32MK1024GPK064, which provides additional peripherals in the same family. This page synthesizes distributor pricing, drop-in same-family alternatives, and practical design notes not found in the manufacturer datasheet alone, giving engineers and buyers a single decision-ready reference for the PIC32MK1024GPD064-I/PT.

견적 요청 문의하기