집적 회로

하위 카테고리

📁 ADC/DAC 2519 제품 📁 증폭기 IC 795 제품 📁 오디오 코덱 16 제품 📁 오디오 IC 2 제품 📁 클록 및 타이밍 295 제품 📁 DSP 963 제품 📁 데이터 수집 IC 2 제품 📁 디지털 포텐셔미터 4 제품 📁 디스플레이 드라이버 및 컨트롤러 1 제품 📁 FPGA & CPLD 6666 제품 📁 인터페이스 IC 1580 제품 📁 LED 드라이버 1 제품 📁 로직 IC 305 제품 📁 메모리 IC 875 제품 📁 마이크로컨트롤러 18712 제품 📁 마이크로프로세서 4 제품 📁 모터 드라이버 1 제품 📁 기타 1 제품 📁 Sensor and Detector Interfaces 1 제품 📁 특수 IC 15 제품 📁 비디오 IC 13 제품

제품 (32773)

PIC32MX150F128B-50I/ML - 50MHz 32-bit MCU 128KB Flash | Microchip
PIC32MX150F128B-50I/ML

PIC32MX150F128B-50I/ML - 50MHz 32-bit MCU 128KB Flash | Microchip

The Microchip Technology PIC32MX150F128B-50I/ML is a 32-bit MIPS32 M4K RISC microcontroller operating up to 50 MHz with 128 KB Flash and 32 KB SRAM, housed in a 28-pin QFN (6x6 mm) package with exposed pad. It supports 2.5V/3.3V operation, integrates two I2S/SPI modules, Peripheral Pin Select (PPS), a Parallel Master Port (PMP), and a 1 ns high-resolution timer for time measurement, while consuming less than 0.5 mA/MHz. A 32-bit microcontroller (MCU) is a programmable system-on-chip that integrates a CPU core, volatile and non-volatile memory, peripherals, and I/O into a single semiconductor device. The PIC32MX family belongs to the broader PIC32 MIPS-based hierarchy, sitting between 8/16-bit PIC microcontrollers and the higher-performance PIC32MZ Cortex-class parts. By combining a 32-bit data path with deterministic interrupt latency and rich peripherals, 32-bit MCUs target embedded systems that require more compute than 8-bit parts but lower cost and power than application processors. Key features of the PIC32MX150F128B include 16-channel 10-bit ADC, two comparators, four general-purpose 16-bit timers, five I2C ports, two UART modules, and two SPI/I2S ports. The device integrates mTouch capacitive touch hardware, an on-chip temperature sensor, and JTAG/ICSP debug interfaces. PPS allows most digital I/O functions to be remapped to alternate pins, simplifying PCB routing and enabling field upgrades without board changes. Architecturally, the part uses a 5-stage MIPS32 M4K pipeline with hardware multiply/divide, prefetch cache, and tightly coupled RAM for deterministic execution. PMP provides an 8/16-bit parallel interface for graphics or external memory, while the 1 ns resolution timer is built from Input Capture hardware enabling precision measurement for motor control, lighting, and instrumentation. Typical applications include industrial control panels, USB audio interfaces, capacitive touch key/slider front panels, low-power IoT sensor nodes, and consumer peripherals requiring graphical LCD or LED matrix displays. The compact 28-QFN footprint suits space-constrained designs such as wearables and embedded modules. When designing with this part, ensure the exposed pad (EP) is soldered to a sufficient ground plane for thermal dissipation; failure to do so may force the device into thermal shutdown at high CPU loads. Also note that PPS remapping must be configured at startup before peripherals are used. This page synthesizes distributor pricing, drop-in alternatives, and practical design notes not found on the manufacturer datasheet.

견적 요청 문의하기
PIC32MX150F128B-50I/SO - 50MHz 32-bit MCU, 128KB Flash | Microchip
PIC32MX150F128B-50I/SO

PIC32MX150F128B-50I/SO - 50MHz 32-bit MCU, 128KB Flash | Microchip

The Microchip Technology PIC32MX150F128B-50I/SO is a 32-bit RISC microcontroller built on the MIPS32 M4K core, delivering up to 50 MHz CPU performance while consuming less than 0.5 mA/MHz. It integrates 128 KB of Flash program memory and 32 KB of SRAM, and is offered in a 28-pin SOIC (SO) wide-body package rated for the industrial -40C to +85C range. This part targets applications that demand deterministic 32-bit processing with peripheral-rich integration including USB, I2S/SP audio, PMP graphics, and capacitive touch. A 32-bit microcontroller (MCU) is a microprocessor-based system-on-chip that integrates a CPU core, program memory (Flash), data memory (SRAM), and a wide set of on-chip peripherals such as timers, communication controllers, and analog blocks. Microcontrollers sit at the top of the embedded-computing hierarchy: MCU -> microcontroller -> embedded processor -> semiconductor. The PIC32MX1XX/2XX family specifically addresses cost-sensitive 32-bit designs where an 8-bit PIC or 16-bit dsPIC is under-powered but a Cortex-M4 class device is over-spec or over-priced. Key features include the Peripheral Pin Select (PPS) remapping engine for flexible signal routing, two I2S/SPI modules for codec and serial audio, a Parallel Master Port (PMP) for graphics and external memory, and a Charge Time Measurement Unit (CTMU) that supports mTouch capacitive touch buttons plus 1 ns high-resolution time measurement. The on-chip 10-bit ADC and internal temperature sensor round out the analog toolset. According to the Microchip PIC32MX1XX/2XX datasheet, the device operates from 2.3 V to 3.6 V with dedicated 5V-tolerant digital I/O pins for mixed-voltage designs. Architecturally the PIC32MX150 uses a single-cycle MIPS32 M4K integer pipeline with hardware multiply/divide, a 5-stage prefetch cache, and an integrated 8 MHz internal FRC oscillator with PLL. Peripheral Pin Select (PPS) decouples digital peripheral functions from physical pin assignments, allowing designers to remap UART, SPI, and timer I/O on the fly and simplify PCB routing. The CTMU block provides constant-current sources for precise time-of-flight measurement, enabling both capacitive touch sensing and high-resolution pulse timing without external timing circuits. Typical applications include USB audio peripherals, low-cost graphics HMI with PMP-driven LCDs, industrial control panels with mTouch buttons, sensor hubs, and consumer devices requiring 32-bit performance with USB device connectivity. The wide-body 28-SOIC footprint eases hand-prototyping and two-layer PCB assembly. When designing with this part, allocate the USB DP/DPU pins carefully because they are not 5V-tolerant; add a proper ESD/EMI network and series resistor on D+/D-. The wide-body SOIC package has noticeably higher thermal resistance than QFN equivalents, so for high-pin-count 50-MHz workloads consider PIC32MX150F128B-I/ML variants if the PCB permits the QFN footprint. This page synthesizes distributor pricing, drop-in same-family alternatives, and practical design notes not found in the manufacturer datasheet.

견적 요청 문의하기
PIC32MX150F128B-50I/SS - 50MHz 32-bit MCU 128KB Flash | Microchip
PIC32MX150F128B-50I/SS

PIC32MX150F128B-50I/SS - 50MHz 32-bit MCU 128KB Flash | Microchip

The Microchip PIC32MX150F128B-50I/SS is a 32-bit MIPS32 M4K RISC microcontroller running at up to 50 MHz with 128 KB Flash and 32 KB SRAM in a 28-pin SSOP package. It belongs to the PIC32MX1xx/2xx 28/36/44-pin family and integrates audio/graphics interfaces, USB, advanced analog peripherals, and on-chip mTouch capacitive-touch support. A 32-bit microcontroller (MCU) is a single-chip computer that integrates a 32-bit CPU core, Flash program memory, SRAM data memory, and a rich peripheral set (ADC, timers, communication controllers, GPIO) into one package. MCUs belong to the broader hierarchy of microcontrollers -> embedded processors -> semiconductors, and 32-bit MCUs are typically chosen when 8-bit or 16-bit devices lack the performance, address space, or peripheral mix required by the application. Key specifications include a 50 MHz maximum CPU clock, 1.56 DMIPS/MHz performance, sub-0.5 mA/MHz active current, a 10-bit 1 Msps ADC with up to 28 channels, two I2S/SPI modules, USB 2.0 full-speed device/host/OTG, a Parallel Master Port (PMP), and Peripheral Pin Select (PPS) for flexible signal routing. The Charge Time Measurement Unit (CTMU) supports mTouch capacitive touch buttons/sliders and provides 1 ns high-resolution time measurement. Architecturally, the device uses a Harvard-style MIPS32 M4K core with hardware multiply/divide, a 5-stage pipeline, and tightly-coupled prefetch cache to sustain 1.56 DMIPS/MHz at 50 MHz. The wide peripheral integration reduces external component count and PCB area, while the 2.3-3.6 V supply range supports both 3.3 V and battery-powered designs. Typical applications include consumer electronics with USB connectivity, industrial control with capacitive touch HMIs, low-cost audio playback using I2S codecs, USB graphics terminals using PMP-driven LCDs, sensor hubs, and small-form-factor IoT endpoints that need more headroom than 8-bit MCUs but lower cost than Cortex-M4 parts. Designers should note that the 28-pin SSOP variant limits available I/O compared to 36/44-pin cousins, so pin allocation matters; PPS allows remapping most digital peripherals to different pins, simplifying PCB layout. Decoupling, ICSP programming header placement, and VDD/VSS pin pairing per the datasheet layout guidelines are critical for noise-free operation. This page synthesizes distributor pricing as of 2026-10-01, drop-in same-package alternatives from the PIC32MX1xx/2xx family, and practical design notes not found on the manufacturer datasheet cover page.

견적 요청 문의하기
PIC32MX150F128B-I/ML - 32-bit 40MHz 128KB Flash MCU 28-QFN
PIC32MX150F128B-I/ML

PIC32MX150F128B-I/ML - 32-bit 40MHz 128KB Flash MCU 28-QFN

The Microchip PIC32MX150F128B-I/ML is a 32-bit MIPS32 M4K RISC microcontroller running at 40 MHz with 128 KB of Flash program memory and 32 KB of SRAM, packaged in a 28-pin QFN (6 x 6 mm) with an exposed thermal pad. Operating from 2.3 V to 3.6 V, the part delivers less than 0.5 mA/MHz active current draw, two PIC interfaces (UART/I2C/SPI), plus I2S, USB 2.0 full-speed OTG, and a Parallel Master Port for graphics. The part also features Peripheral Pin Select (PPS) and on-chip temperature measurement, suiting compact low-power embedded designs. A microcontroller (MCU) is a single-chip computer that integrates a CPU core, Flash program memory, SRAM, and a wide range of peripherals (timers, ADC, communication interfaces, GPIO) on one die. Within the broader taxonomy, the PIC32MX150F128B-I/ML belongs to the microcontroller -> embedded processor -> semiconductor hierarchy. Its MIPS32 M4K core places it in Microchip's PIC32 family, which bridges 8/16-bit PIC MCUs and 32-bit ARM Cortex-M parts by combining 32-bit throughput with familiar PIC development tools such as MPLAB X and Harmony. Key features include a 10-bit 1 Msps ADC with up to 13 channels, five 16-bit timers plus two 32-bit timers, a 16-bit Input Capture Motor driving sub-microsecond resolution time measurement, four PWM channels with output compare, an integrated temperature sensor, and support for mTouch capacitive touch sensing via the CTMU. Peripheral Pin Select (PPS) lets developers remap digital peripherals onto a wide choice of pins, easing PCB routing. Two I2S/SSP modules simplify audio codec interfacing, while PMP allows direct connection to graphical LCDs. Architecturally, the device is built on a CMOS process with 5-stage pipeline M4K core, single-cycle hardware MAC for DSP operations, and prefetch cache to mask Flash latency. A wide peripheral set (USB-OTG, CAN, PMP, I2S, UART, SPI, I2C, ADC, comparators) is balanced with 21 general-purpose I/Os. PPS allows digital function reassignment without redesigning the PCB. Typical applications include industrial control interfaces, low-cost audio playback with I2S codec, USB HID/CDC peripherals, graphical user interfaces with PMP-driven LCDs, capacitive touch panels, and consumer devices. Designers value the small 6x6 mm QFN footprint and integrated USB for space-constrained products. The V/ML temperature grade (-40C to +105C) industrial version fits mains- and battery-powered designs. When designing with this part, observe the maximum 50 MHz system clock, place 0.1 uF + 10 uF bulk capacitors close to VDD/VSS, and route the exposed thermal pad to a contiguous ground plane to handle brief load surges above ~85 ms. Always reference the latest MPLAB X project and errata DS60001360 prior to firmware release. This page consolidates distributor stock, drop-in alternatives, pricing tiers, and practical design notes not found in the manufacturer datasheet, giving component engineers and procurement a faster, comparable view of the PIC32MX150F128B-I/ML.

견적 요청 문의하기
PIC32MX150F128B-I/SP - 32-bit MCU 128KB Flash 40MHz 28-SPDIP
PIC32MX150F128B-I/SP

PIC32MX150F128B-I/SP - 32-bit MCU 128KB Flash 40MHz 28-SPDIP

The Microchip PIC32MX150F128B-I/SP is a 32-bit MIPS M4K microcontroller operating up to 40 MHz with 128 KB Flash and 32 KB SRAM, housed in a 28-pin SPDIP (Skinny Plastic DIP) through-hole package. It draws less than 0.5 mA/MHz active current and integrates two I2S/SPI modules, a Parallel Master Port (PMP) for graphics interfaces, Peripheral Pin Select (PPS), and a Charge Time Measurement Unit (CTMU) that supports mTouch capacitive touch buttons, sliders, and 1 ns high-resolution time measurement. A microcontroller (MCU) is a single-chip computer containing a CPU core, volatile and non-volatile memory, and programmable peripherals. The PIC32MX family represents Microchip's 32-bit MIPS-based line that bridges 8/16-bit PIC and ARM Cortex-M designs, offering higher performance while retaining PIC-style peripheral integration. Within the system hierarchy, the MCU sits below power management ICs and above discrete logic, serving as the central processing node in embedded designs. Key specifications include a 2.3 V to 3.6 V supply range, 21 general-purpose I/O pins, five 16-bit timers (plus two 32-bit timers), a 10-bit 1 Msps ADC with up to 13 channels, and on-chip temperature measurement. USB 2.0 full-speed device support and a 4-channel DMA controller round out the connectivity and throughput features. The CTMU enables cost-effective capacitive touch sensing and precise time-of-flight measurements without external timing ICs. Typical applications span industrial control panels, consumer audio devices, USB peripherals, low-cost graphics HMIs with PMP-driven TFT or OLED displays, capacitive touch user interfaces, and sensor aggregation nodes. The 28-SPDIP package supports easy breadboarding and hand-rework for prototypes and educational designs. Designers should follow the datasheet's recommended decoupling (100 nF + 1 µF close to VDD/AVDD) and observe the 3.6 V absolute maximum supply limit. The PPS feature remaps peripherals to most I/O pins, simplifying board layout and BOM reuse across PIC32MX1XX/2XX family variants. This page consolidates real-time distributor pricing, drop-in same-package alternatives, and practical design notes that are not collocated in the manufacturer datasheet.

견적 요청 문의하기
PIC32MX150F128B-I/SS - 40MHz 32-bit MCU 128KB Flash | Microchip
PIC32MX150F128B-I/SS

PIC32MX150F128B-I/SS - 40MHz 32-bit MCU 128KB Flash | Microchip

The Microchip PIC32MX150F128B-I/SS is a 32-bit RISC microcontroller based on the MIPS32 M4K core, operating at up to 40 MHz with 128 KB Flash and 32 KB SRAM, packaged in a 28-pin SSOP (5.30 mm body, 0.65 mm pitch). The MPN suffix I/SS denotes the industrial temperature grade (-40C to +85C) and SSOP surface-mount package. A microcontroller (MCU) is a single-chip computer that integrates a CPU core, program memory (Flash), working memory (SRAM), and a rich set of peripherals (ADCs, timers, communication interfaces) into one device. Within the broader hierarchy, the PIC32MX1xx family belongs to 32-bit microcontrollers, which sit alongside 8-bit (PIC10/12/16), 16-bit (PIC24, dsPIC33), and 32-bit (Cortex-M) MCU classes, all serving as the central processing unit for embedded systems across consumer, industrial, and automotive markets. Key features include less than 0.5 mA/MHz active current consumption, two I2S/SPI modules for codec and serial communication, Peripheral Pin Select (PPS) for flexible pin mapping, Parallel Master Port (PMP) for graphics interfaces, mTouch capacitive touch support, 1 ns high-resolution time measurement via the Capture/Compare/PWM peripheral, on-chip temperature measurement, and a Charge Time Measurement Unit (CTMU) for capacitive sensing. The integrated USB 2.0 full-speed Device/Host/OTG controller is a hallmark of the PIC32MX1xx/2xx family. Architecturally, the MIPS32 M4K core delivers 1.56 DMIPS/MHz and runs at 40 MHz with a zero-wait-state Flash interface. The 5-stage pipeline, hardware multiply/divide, and 32-bit-wide datapath give the PIC32MX150F128B roughly 5x the performance of a comparable PIC24 16-bit MCU. The 10-bit 1 Msps ADC with up to 13 input channels, five 16-bit timers, and two I2C plus two UART interfaces provide extensive analog and digital integration. Typical applications include USB audio peripherals (headsets, microphones, speakers), capacitive touch human-machine interfaces, industrial control panels with graphics, sensor hub data aggregation, and low-cost 32-bit embedded nodes. The combination of USB, I2S, and PMP makes this device particularly attractive for consumer audio accessories and industrial HMI modules where a single-chip BOM reduces total cost. Designers should note that achieving 40 MHz operation requires VDD between 2.3V and 3.6V, with careful decoupling of AVDD/AVSS and VDD/VSS pin pairs. The ICSP programming interface uses PGECx/PGEDx pin pairs and requires all VSS and VDD pins to be connected for reliable in-circuit programming and debugging. This page synthesizes distributor pricing, drop-in alternative MPNs from the same PIC32MX1xx/2xx family, and practical design notes not consolidated in any single manufacturer document.

견적 요청 문의하기
PIC32MX150F128B-V/SP - 32-bit MCU 128KB Flash 40MHz 28-SPDIP | Microchip
PIC32MX150F128B-V/SP

PIC32MX150F128B-V/SP - 32-bit MCU 128KB Flash 40MHz 28-SPDIP | Microchip

The Microchip PIC32MX150F128B-V/SP is a 32-bit MIPS M4K microcontroller running up to 40 MHz with 128 KB Flash and 32 KB SRAM, housed in a 28-pin SPDIP (Skinny Plastic DIP) package. It operates from 2.3 V to 3.6 V, provides 21 general-purpose I/O pins, and integrates two I2S/SPI modules for codec and serial communications, plus a Parallel Master Port (PMP) for graphics interfaces. The V suffix denotes the -40C to +105C extended temperature grade. A microcontroller (MCU) is a single-chip computer that integrates a CPU core, program memory, data memory, and peripherals. The PIC32MX150 belongs to the MIPS-based PIC32 family, which sits in the broader hierarchy of 32-bit microcontrollers, embedded processors, and system-on-chip (SoC) devices. Compared with 8-bit and 16-bit MCUs, 32-bit devices offer higher MIPS per MHz, larger address spaces, and richer peripherals such as USB, Ethernet, and graphics LCD interfaces, making them suitable for connected and human-machine-interface applications. Key differentiating features of this part include Peripheral Pin Select (PPS), which allows remapping of most digital peripherals to any I/O pin for flexible PCB routing; an on-chip Charge Time Measurement Unit (CTMU) that supports mTouch capacitive touch buttons and sliders and provides 1 ns high-resolution time measurement; an on-chip temperature measurement diode; and an integrated Parallel Master Port for direct connection to graphical LCDs or FPGA peripherals. Active power consumption is below 0.5 mA/MHz, helping battery-powered designs. The architecture pairs a MIPS32 M4K core with five 16-bit timers (and up to two 32-bit timers), a 10-bit ADC, and a USB 2.0 full-speed device/host/OTG controller on selected variants. This combination supports audio playback, USB connectivity, and mixed-signal conditioning in a single chip. Typical applications are USB audio devices, graphics HMI panels with PMP-driven LCDs, capacitive touch user interfaces, industrial control with on-chip temperature sensing, and low-cost 32-bit replacements for older 16-bit designs. When designing with this part, verify the V vs I temperature grade early, because the V variant is specified for -40C to +105C operation, while the I variant is rated for -40C to +85C and is typically cheaper. This page synthesizes distributor pricing, drop-in alternatives, and practical design notes beyond the manufacturer datasheet.

견적 요청 문의하기
PIC32MX150F128B-V/SS - 40MHz 128KB Flash MCU | Microchip
PIC32MX150F128B-V/SS

PIC32MX150F128B-V/SS - 40MHz 128KB Flash MCU | Microchip

The Microchip Technology PIC32MX150F128B-V/SS is a 32-bit MIPS32 M4K PIC microcontroller running at 40 MHz, equipped with 128 KB Flash and 32 KB SRAM in a 28-pin SSOP package with 21 I/O pins. It operates from 2.3V to 3.6V, supports automotive-grade temperature range -40°C to +105°C, and consumes less than 0.5 mA/MHz active current. The -V/SS suffix designates the 28-pin SSOP package and the high-temperature grade. A 32-bit microcontroller (MCU) is a programmable system-on-chip that integrates a CPU core, Flash program memory, SRAM, and a rich set of peripherals on a single die. Within the broader taxonomy, PIC32MX devices sit in the microcontroller -> embedded controller -> semiconductor hierarchy. The MIPS M4K core supports the MIPS32 instruction architecture, providing 32-bit datapath performance while remaining code-compatible with the broader PIC32 ecosystem. This PIC32MX150/170/1XX family targets cost-sensitive embedded designs needing USB, audio, and graphics interfaces. Key features include two I2S/SPI modules for codec and serial communications, Peripheral Pin Select (PPS) for flexible signal routing, a Parallel Master Port (PMP) for graphics interfaces, and support for mTouch capacitive touch buttons and sliders. The integrated Charge Time Measurement Unit (CTMU) provides 1 ns high-resolution time measurement, while an on-chip temperature sensor simplifies thermal monitoring without external components. Five general-purpose 16-bit timers and a 10-bit ADC round out the analog and timing peripherals. Architecturally, the M4K core is a 5-stage pipeline RISC processor with hardware multiply/divide, delivering 1.56 DMIPS/MHz. The 128 KB Flash is organized as 128K x 8 with ECC support, and 32 KB SRAM provides ample workspace for protocol stacks and audio buffers. PPS is particularly valuable because it allows digital peripheral pins to be remapped in software, simplifying PCB layout when signals would otherwise need to cross. Typical applications include USB audio peripherals, low-cost graphics HMI with PMP-driven LCDs, capacitive touch key panels, industrial control with mTouch, and automotive body controllers benefiting from the extended -40°C to +105°C grade. The device is well-suited to bridge products transitioning from PIC16/PIC24 designs to 32-bit performance. When using this part, ensure the 32 kHz crystal and PLL configuration follow the datasheet's oscillator tuning procedure to meet USB Full-Speed timing. JTAG/ICSP pads must remain accessible for in-circuit programming if the application does not dedicate them to other functions. This page synthesizes distributor stock, parameter-matched drop-in alternatives, and practical design notes not found in the standalone manufacturer datasheet.

견적 요청 문의하기
PIC32MX150F128BT-50I/ML - 50MHz 32-bit MCU, 128KB Flash, 28-QFN | Microchip
PIC32MX150F128BT-50I/ML

PIC32MX150F128BT-50I/ML - 50MHz 32-bit MCU, 128KB Flash, 28-QFN | Microchip

The Microchip Technology PIC32MX150F128BT-50I/ML is a 32-bit MIPS32 M4K PIC microcontroller operating at 50 MHz, with 128 KB Flash and 32 KB SRAM, housed in a 28-pin QFN (6x6 mm) package with exposed thermal pad. It is part of the PIC32MX1XX/2XX 28/36/44-pin family and supports an industrial temperature range of -40C to +85C. A microcontroller (MCU) is a single-chip computer that integrates a CPU core, program memory (Flash), data memory (SRAM), and peripherals such as timers, communication controllers, and analog blocks. The PIC32MX150 sits in Microchip's 32-bit MCU hierarchy: PIC32MX150 -> PIC32MX1XX family -> PIC32MX series -> 32-bit MCU -> microcontroller -> embedded computing -> semiconductor. It uses the MIPS32 M4K core, a Harvard-architecture RISC processor with single-cycle multiplication, optimized for deterministic real-time performance. Key features include 128 KB (128 K x 8) Flash, 32 KB SRAM, 21 general-purpose I/O pins, two I2S/SPI modules for codec and serial communications, Peripheral Pin Select (PPS) for flexible pin mapping, a Parallel Master Port (PMP) for graphics interfaces, mTouch capacitive touch support, high-resolution 1 ns time measurement, on-chip temperature sensing, and less than 0.5 mA/MHz active current consumption. The 28-QFN package (ML suffix, 6x6 mm body, exposed pad for thermal dissipation) supports surface-mount assembly and provides a low thermal resistance path for the silicon die. The 50 MHz operating speed is paired with separate PLLs for CPU and USB clocks, multiple DMA channels, and dual I2C, UART, SPI, I2S, and PMP interfaces. Typical applications include USB audio peripherals, low-cost graphics interfaces with PMP-driven LCDs, capacitive touch human-machine interfaces, sensor hubs with on-chip temperature measurement, industrial control panels, and consumer audio devices requiring I2S interfaces. When designing with this device, ensure the exposed pad is soldered to a sufficient copper area for thermal dissipation. The PPS system requires peripheral pin lock configuration to prevent accidental remapping at runtime. This page synthesizes verified distributor pricing, drop-in alternatives from the same PIC32MX1XX family, and practical design notes - information beyond what the manufacturer datasheet alone provides.

견적 요청 문의하기
PIC32MX150F128BT-50I/SO - 50MHz 32-bit MCU 128KB Flash SOIC-28 | Microchip
PIC32MX150F128BT-50I/SO

PIC32MX150F128BT-50I/SO - 50MHz 32-bit MCU 128KB Flash SOIC-28 | Microchip

The Microchip Technology PIC32MX150F128BT-50I/SO is a 32-bit MIPS32 M4K RISC microcontroller featuring 128KB of Flash program memory, 32KB of SRAM, and a maximum CPU clock speed of 50 MHz, supplied in a 28-pin Small Outline IC (SOIC) package supplied on Tape and Reel. According to the Microchip PIC32MX1xx/2xx datasheet, the device integrates a 5-stage pipeline, 1.56 DMIPS/MHz core, hardware Multiply/Divide unit, and a Peripheral Pin Select (PPS) system that remaps digital peripherals to any I/O pin for maximum board-layout flexibility. What is a PIC32 microcontroller? The PIC32MX family is Microchip's line of MIPS-based 32-bit microcontrollers positioned between the 8-bit PIC16/PIC18 and the 32-bit Cortex-M families. PIC32MX parts run the MIPS32 M4K core and are supported by MPLAB X IDE, Harmony MCC, and the XC32 compiler. They are widely used in hobbyist and industrial designs where 32-bit performance, deterministic interrupt behavior, and rich connectivity peripherals (USB, CAN, I2S, PMP) are needed without stepping up to Cortex-M cost. Key features of the PIC32MX150F128BT-50I/SO include 21 general-purpose I/O pins, two I2S/SPI modules for codec and serial communications, a Parallel Master Port (PMP) for graphics interfaces, mTouch capacitive touch support, on-chip temperature measurement, and 1 ns high-resolution time capture. Two comparators, a 10-bit 1 Msps ADC with up to 13 channels, and five 16-bit timers round out the analog and timing peripherals. The -50 speed grade is rated up to 50 MHz at 2.5V-3.6V operation. Architecturally, the PIC32MX150 uses 1.8V internal core regulation with a separate I/O supply domain, allowing the I/O ring to run at 3.3V while the core runs at 1.8V. The 128KB Flash is single-bank and supports runtime self-programming under firmware control, while the 32KB SRAM includes DMA-accessible regions for high-throughput peripheral transfers. Typical applications include USB device peripherals, audio playback and processing, low-cost graphics HMI via PMP, sensor hubs, and industrial control nodes that benefit from the deterministic 5-stage pipeline. The 28-SOIC footprint is friendly to through-hole-style hand-soldered prototypes as well as automated SMT lines. When designing with this part, place a 0.1 uF decoupling capacitor within 5 mm of each VDD/VSS pair and a bulk 10 uF tantalum or ceramic near the regulator. Leave the VBUS pin floating if USB is not used, and reserve an ICSP header on every prototype for in-circuit debugging. This page consolidates distributor pricing, drop-in alternative MPNs in the same 28-SOIC footprint, and practical design guidance not found in the standalone datasheet.

견적 요청 문의하기
PIC32MX150F128BT-50I/SS - 50MHz 128KB Flash 32-bit MCU | Microchip
PIC32MX150F128BT-50I/SS

PIC32MX150F128BT-50I/SS - 50MHz 128KB Flash 32-bit MCU | Microchip

The Microchip Technology PIC32MX150F128BT-50I/SS is a 32-bit RISC microcontroller based on the MIPS32 M4K core, delivering up to 50 MHz CPU clock with 128 KB Flash and 32 KB SRAM, housed in a 28-pin SSOP (5.30 mm body width) package. It integrates Peripheral Pin Select (PPS), two I2S/SPI modules, a Parallel Master Port (PMP), USB 2.0 full-speed support, mTouch capacitive touch sensing, and a 1 ns high-resolution time measurement module. Industrial temperature range spans -40C to +85C, with sub-0.5 mA/MHz active current consumption. A 32-bit microcontroller (MCU) is a single-chip computer integrating a 32-bit processor core, program and data memory, and programmable peripherals. Within the system hierarchy, the PIC32MX150F128B belongs to the PIC32MX family -> 32-bit MCU family -> microcontroller -> embedded processor -> semiconductor. Compared to 8-bit PIC MCUs, the MIPS32 M4K core offers up to 1.56 DMIPS/MHz, suitable for DSP and graphics workloads where 8-bit cores cannot keep pace. Key features include 50 MHz max CPU speed, 128 KB Flash program memory organized as 128K x 8, 32 KB SRAM, USB 2.0 full-speed Device/Host/OTG support, 10-bit 1 Msps ADC with up to 13 analog inputs, four I2C, five UART, two I2S/SPI, and PMP for graphics LCDs. A real-time clock and calendar (RTCC) with backup power input is integrated, plus five 16-bit timers and a 32-bit core timer for precise scheduling. Architecturally, the device uses a Harvard bus with separate Flash and RAM paths, M4K pipelined core with single-cycle multiply, and Peripheral Pin Select remapping that allows most digital peripherals to be routed to any remappable GPIO pin at runtime. This eliminates the PCB redesign cycle when a peripheral is moved. Internal 8 MHz FRC and PLL support 4x multiplication to reach 50 MHz system clock without external oscillator cost. Typical applications include USB peripherals (HID, CDC, audio class), small TFT graphics HMI panels using PMP, audio codec interfaces via I2S, capacitive touch button panels, low-cost industrial sensor hubs, and consumer appliances requiring USB connectivity with modest computational headroom. The integrated USB PHY makes the PIC32MX150F128BT particularly attractive for low-BOM-count designs. When designing with this MCU, allocate decoupling capacitors (100 nF + 10 uF) on each VDD/AVDD pair within 3 mm of the pins, and follow Microchip's application note AN588 for USB board layout to maintain 90-ohm differential impedance. The ICSP programming pins must be brought out for in-circuit programming and debugging; consult MPLAB X IDE for pin allocator settings.

견적 요청 문의하기
PIC32MX150F128BT-I/ML - 32-bit MCU 128KB Flash 40MHz | Microchip
PIC32MX150F128BT-I/ML

PIC32MX150F128BT-I/ML - 32-bit MCU 128KB Flash 40MHz | Microchip

The Microchip PIC32MX150F128BT-I/ML is a 32-bit MIPS32 M4K RISC microcontroller with 128 KB Flash, 32 KB SRAM, and 40 MHz maximum CPU clock, housed in a 28-pin QFN (6x6 mm) package with exposed pad for thermal dissipation. It operates from 2.3 V to 3.6 V and integrates two I2S/SPI modules, two UART, two I2C, a USB 2.0 Full-Speed device peripheral, a Parallel Master Port (PMP), and a 10-bit 1 Msps ADC with up to 13 channels. What is a 32-bit PIC microcontroller? A 32-bit MCU is a microcontroller whose arithmetic logic unit, registers, and data bus are all 32 bits wide, enabling single-cycle multiplications, larger linear address spaces, and significantly higher throughput than 8-bit or 16-bit alternatives. The PIC32MX family is Microchip Technology's migration path from the PIC16/PIC24 lines to true 32-bit performance while preserving Peripheral Pin Select (PPS) flexibility and the MPLAB X / Harmony tool-chain ecosystem. Positioned in the hierarchy: PIC32MX150F128B -> PIC32MX1xx family -> PIC32MX series -> PIC32 family -> 32-bit microcontroller -> microcontroller -> embedded semiconductor. Key features of this part include 21 general-purpose I/O lines, five 16-bit timers (with Input Capture and Output Compare), a 5-channel DMA controller, mTouch capacitive-touch hardware, an on-chip temperature sensor, and pin remapping via PPS. The MIPS32 M4K core delivers 1.56 DMIPS/MHz (approx. 52 DMIPS at 40 MHz), bringing genuine 32-bit performance to cost-sensitive designs. The 128 KB Flash supports self-programming and the 32 KB SRAM comfortably accommodates TCP/IP stacks or USB audio class frames. Technical depth: the silicon integrates dedicated PLLs for the system clock and the USB clock, allowing the 48 MHz USB clock to be generated without an external crystal when the system uses the internal 8 MHz oscillator plus PLL. Two Comparators and a CTMU (Charge Time Measurement Unit) round out the analog front end, while JTAG and two-wire ICSP provide debug. Typical applications include USB audio interfaces (USB headphone DAC), capacitive touch panels, low-cost graphics with PMP-driven TFTs, sensor hubs, and battery-powered IoT nodes. Pairing it with a USB device stack and the on-chip PMP removes the need for an external display controller. When designing with this device, route the exposed pad (EP) to a continuous ground plane with multiple thermal vias to keep theta_JA within the 28-QFN thermal envelope; this is the single most common layout pitfall on QFN packages.

견적 요청 문의하기
PIC32MX150F128BT-I/SO - 40MHz 32-bit MCU 128KB Flash | Microchip
PIC32MX150F128BT-I/SO

PIC32MX150F128BT-I/SO - 40MHz 32-bit MCU 128KB Flash | Microchip

The Microchip PIC32MX150F128BT-I/SO is a 32-bit MIPS32 M4K RISC microcontroller running at up to 40 MHz, integrating 128 KB of Flash program memory and 32 KB of SRAM in a 28-pin SOIC package. The 'BT' suffix denotes tape-and-reel packaging, the 'I' indicates the industrial -40C to +85C temperature range, and the 'SO' specifies the wide-body SOIC-28 outline. The device operates from a single 2.3V to 3.6V supply and consumes less than 0.5 mA/MHz active, making it well suited to battery-aware embedded designs. A 32-bit microcontroller (MCU) is a single-chip computer that integrates a CPU core, program and data memory, and a rich set of peripherals on one silicon die. Within the embedded hierarchy it sits at the same tier as 16-bit MCUs and 8-bit MCUs but offers higher computational throughput, larger addressable memory, and typically richer peripheral integration. PIC32MX1xx/2xx devices occupy the low-power, low-pin-count position of the PIC32 family, sitting between the smaller PIC24 16-bit line and the higher-pin-count PIC32MX3xx/4xx/5xx/6xx/7xx families. Key features include the MIPS32 M4K core with 5-stage pipeline and hardware multiply/divide, two I2S/SPI modules for audio codec interfaces, two UART and two I2C peripherals, a Parallel Master Port (PMP) for graphics displays, and up to four DMA channels with automatic data-size detection. Peripheral Pin Select (PPS) remaps most digital peripherals to a wide choice of physical pins, easing PCB layout. Five 16-bit timers, a 10-bit 1 Msps ADC with up to 13 channels, on-chip temperature sensing, and mTouch capacitive-touch support round out the analog and timing resources. A separate PLL for the USB clock allows full-speed USB 2.0 device operation independently of the system clock. The architecture uses a Harvard-style bus with separate program Flash and SRAM paths, and a configurable prefetch module that hides Flash latency at high clock rates. The 128 KB Flash is organized for in-application programming through self-write rows, and the device supports run-time DMA-driven peripheral servicing with minimal CPU intervention. Interrupt latency is deterministic, which simplifies real-time control loops. Typical applications include low-cost USB audio peripherals, small graphical HMI panels using PMP, capacitive-touch user interfaces, sensor hubs, and general-purpose 32-bit control replacing older PIC24 or 8051 designs. Designers migrating from 8-bit PIC16/PIC18 parts gain an immediate 30x-50x instruction throughput uplift while keeping the MPLAB X toolchain and Harmony framework. Design consideration: the 28-pin SOIC does not expose every peripheral on a fixed pin. Plan your pin map using PPS early in the schematic phase, and budget for an external 8 MHz primary crystal if USB accuracy is required - the internal 8 MHz Fast RC is insufficient for full-speed USB without software calibration against the USB SOF. This page synthesizes distributor pricing, drop-in package-equivalent alternatives, and practical design notes that are not collected in any single manufacturer datasheet, helping engineers shorten the BOM validation and second-source qualification cycle.

견적 요청 문의하기
PIC32MX150F128BT-V/SO - 40MHz 32-bit MCU 128KB Flash 28-SOIC | Microchip
PIC32MX150F128BT-V/SO

PIC32MX150F128BT-V/SO - 40MHz 32-bit MCU 128KB Flash 28-SOIC | Microchip

The Microchip Technology PIC32MX150F128BT-V/SO is a 32-bit MIPS32 M4K PIC microcontroller running at 40 MHz with 128 KB of Flash and 32 KB of SRAM, housed in a 28-pin SOIC (SO) wide-body package. It operates from 2.3 V to 3.6 V over the -40C to +105C automotive V-temp range and integrates 21 general-purpose I/O, two I2S/SPI modules, a Parallel Master Port (PMP), a 1 Msps 10-bit ADC, mTouch capacitive touch support, and a 1 ns resolution time-capture unit. The single-cycle multiply hardware divider needs HW multiplier consume less than 0.5 mA/MHz for low-power embedded designs. A PIC32MX-series microcontroller is a 32-bit RISC MCU built on the MIPS microAptiv (M4K) core, sitting in Microchip's hierarchy of 32-bit embedded controllers: PIC32MX -> PIC32 -> 32-bit MCU -> microcontroller -> semiconductor. Compared with 8-bit PIC16/PIC18 devices, the PIC32MX delivers deterministic interrupt latency, full C-language efficiency, and on-chip peripherals that previously needed glue logic - making it a mainstream choice for human-machine interface (HMI), audio decoding, and USB device applications. Key features include two I2S/SPI interfaces for codec and serial communications, Peripheral Pin Select (PPS) for flexible signal routing, mTouch capacitive touch buttons and sliders, on-chip temperature measurement, and a Parallel Master Port for graphics interfaces. Hardware trace and JTAG boundary-scan interfaces support development, and the wide-body 28-SOIC footprint is friendly to through-hole DPCB prototypes and hand-rework designs. The device uses a Harvard-architecture bus with separate program Flash (128 KB) and data SRAM (32 KB) for deterministic code-fetch and zero-wait-state operation up to 40 MHz. Integrated DMA, up to 5 timers, PMP, I2S/SPI, USB, and ADC peripherals enable designers to consolidate multiple external components onto a single chip, reducing BOM cost and PCB area. Less than 0.5 mA/MHz active current keeps thermal dissipation low in compact sealed enclosures. Typical applications include USB audio bridges, capacitive touch human-machine interfaces, graphic LCD control via PMP, low-cost sensor data acquisition, and industrial control panels. The V-temp range and automotive pedigree make the -V/SO grade especially suited for AEC-Q100 design chains and automotive-grade subsystems where higher temperature reliability is required. When designing with the PIC32MX150F128BT-V/SO, confirm that your toolchain - MPLAB X IDE, XC32 compiler, and Harmony framework - supports the exact silicon revision (B revision). Route analog inputs away from PWM outputs to minimize ADC crosstalk, and use 100 nF + 10 uF decoupling close to each VDD/VSS pair. Boundary-scan is enabled through dedicated JTAG pins for in-circuit test coverage.

견적 요청 문의하기
PIC32MX150F128BT-V/SS - 32-bit MCU 128KB Flash 40MHz | Microchip
PIC32MX150F128BT-V/SS

PIC32MX150F128BT-V/SS - 32-bit MCU 128KB Flash 40MHz | Microchip

The Microchip Technology PIC32MX150F128BT-V/SS is a 32-bit MIPS32 M4K PIC microcontroller with 128 KB Flash, 32 KB SRAM, and 40 MHz CPU clock in a 28-pin SSOP (5.30 mm body) package. The device supports 21 I/O pins, operates from 2.3 V to 3.6 V, and is qualified for the -40C to +105C extended-industrial temperature range, as shown in the Microchip PIC32MX150/170 family datasheet. An MCU (microcontroller unit) is a single-chip computer that integrates a CPU core, program memory (Flash), data memory (SRAM), and on-chip peripherals such as ADC, timers, communication interfaces, and I/O. The PIC32 family sits above the 8-bit PIC16/PIC18 families and below the high-performance PIC32MZ/32MK families, addressing applications that need 32-bit processing headroom with low power and rich peripherals. Within the PIC32MX1xx/2xx series, the part number suffix encodes the package and grade: T = tape and reel, V = -40C to +105C operating range, and SS = 28 SSOP. Key features include a MIPS32 M4K core running up to 40 MHz (50 MHz on selected -50I variants), Peripheral Pin Select (PPS) for flexible I/O mapping, a Parallel Master Port (PMP) for graphics interfaces, two I2S/SPI modules for audio codec interfacing, mTouch capacitive-touch support, a 1 ns high-resolution timer, and an on-chip temperature sensor. The device also integrates a 10-bit ADC, five 16-bit timers plus two 32-bit timers, DMA, and USB 2.0 full-speed on-package variants. Architecturally, the PIC32MX150 combines a Harvard-style MIPS core with a multi-channel DMA engine, a 1.5 Msps 10-bit ADC, and analog comparators on a single die. The 128 KB Flash holds application code, while the 32 KB SRAM supports data buffers for USB and audio streams. PPS allows most digital peripherals to be remapped to any digital I/O pin, simplifying PCB routing. Typical applications include USB audio devices, capacitive-touch human-machine interfaces, low-cost graphics modules with PMP, sensor hubs, and industrial sensor nodes. The 128 KB Flash and 32 KB SRAM are sufficient for protocols such as USB HID/CDC, basic Bluetooth HCI stacks, and small RTOS kernels. When designing, ensure a 10 uF bulk + 0.1 uF bypass capacitor is placed within 6 mm of each VDD/VSS pair, and that traces to the 8 MHz crystal (or 40 MHz internal oscillator configuration) are kept short to minimize EMI and clock jitter. This page synthesizes distributor pricing, drop-in alternatives within the same SSOP-28 footprint, and practical design notes for the PIC32MX150F128BT-V/SS that go beyond the manufacturer datasheet.

견적 요청 문의하기
PIC32MX150F128C-50I/TL - 50MHz 32-bit MCU, 128KB Flash | Microchip
PIC32MX150F128C-50I/TL

PIC32MX150F128C-50I/TL - 50MHz 32-bit MCU, 128KB Flash | Microchip

The Microchip PIC32MX150F128C-50I/TL is a 32-bit MIPS32 M4K microcontroller operating at up to 50MHz, integrating 128KB of Flash program memory and 32KB of SRAM, and housed in a 36-pin VTLA (5x5 mm) package with an exposed thermal pad. The device is designed for 2.5V/3.3V operation, supports industrial temperature ranges, and offers low-power sleep modes for energy-constrained embedded designs. A 32-bit microcontroller is a single-chip computer whose CPU datapath, registers, and ALU are 32 bits wide, enabling higher code density, larger addressable memory spaces, and richer peripheral integration than 8-bit or 16-bit MCUs. The PIC32MX1XX/2XX family positions itself at the low-power, low-cost end of Microchip's 32-bit portfolio, combining a MIPS32 M4K core with peripherals such as a 12-bit Analog-to-Digital converter, USB 2.0 full-speed device and device, I2C, UART, and SPI. Within the broader taxonomy, the part sits inside microcontrollers, then embedded processors, then integrated circuits. Key features of the PIC32MX150F128C-50I/TL include 128KB (128K x 8) of Flash, 32KB of SRAM, a 50MHz maximum operating frequency, peripheral pin select (PPS) for flexible signal routing, multiple DMA channels, and integrated USB 2.0 full-speed support. It also integrates a 12-bit ADC with multiple input channels, comparators, and timers for general-purpose and motor-control applications. The MIPS32 M4K core executes most instructions in a single cycle and supports the MIPS16e ASE for compressed code density. A five-stage pipeline, separate buses for Flash and SRAM, and a hardware multiply/divide unit give the device deterministic performance for real-time control. Power management features include on-chip LDO regulation, multiple idle modes, and a low-power RC oscillator for the watchdog timer, allowing battery-backed designs to retain responsiveness while minimizing quiescent draw. Typical applications include USB peripherals, industrial control panels, low-cost graphical user interfaces, audio processing front-ends, sensor hubs, and small form-factor IoT edge nodes. The exposed pad VTLA-36 package is well matched to compact PCB assemblies where board space is constrained. Designers should note that this part operates from 2.3V to 3.6V and requires careful decoupling near the VDDCORE pins. The peripheral pin select function allows remapping of most digital peripherals to any remappable I/O, simplifying PCB layout. Programming and debug are performed through Microchip's standard 2-wire ICSP interface using MPLAB X IDE and a PICkit or ICD debugger. This page synthesizes distributor pricing, drop-in pin-compatible alternatives, application guidance, and design considerations not aggregated in the full or product page, helping engineers accelerate selection and integration.

견적 요청 문의하기
PIC32MX150F128C-I/TL - 32-bit MIPS MCU, 128KB Flash | Microchip
PIC32MX150F128C-I/TL

PIC32MX150F128C-I/TL - 32-bit MIPS MCU, 128KB Flash | Microchip

The Microchip Technology PIC32MX150F128C-I/TL is a 32-bit microcontroller from the PIC32MX family featuring a MIPS32 M4K core operating at 40 MHz, with 128 KB of Flash program memory and 32 KB of SRAM, housed in a 36-pin VTLA (5x5 mm) exposed-pad package. The device integrates rich connectivity (I2C, IrDA, LINbus, PMP, SPI, UART/USART) and on-chip peripherals for audio, graphics, USB, and advanced analog signal handling. Its 40 MHz core delivers up to 1.56 DMIPS per MHz, providing high deterministic performance for embedded control and signal processing tasks. A PIC32MX microcontroller is a 32-bit MIPS-based MCU that bridges the gap between traditional 8/16-bit controllers and higher-cost application processors. It belongs to the broader hierarchy of MCU -> embedded controller -> microcontroller -> semiconductor IC. The 32-bit MIPS core, combined with ample Flash and SRAM, makes the PIC32MX series well-suited to GUI, USB, and connectivity-heavy products where 8-bit controllers run out of headroom. The PIC32MX1XX/2XX family specifically targets cost-sensitive audio/graphics peripherals with USB OTG and advanced analog. Key features include 21 general-purpose I/O pins, 4 DMA channels with automatic data-size detection, five 16-bit general-purpose timers, two UART and two I2C modules, separate PLLs for CPU and USB clocks, Peripheral Pin Select (PPS) for flexible signal routing, a configurable watchdog timer with on-chip low-power RC oscillator, and multiple low-power modes. The PIC32MX150F128C operates from 2.3 V to 3.6 V and supports an industrial temperature range of -40C to +85C. Technically, the part is CMOS-process-based with integrated 8-channel 10-bit ADC, comparators, RTCC, CTMU, and USB 2.0 full-speed OTG. The bus matrix, prefetch buffer, and 4-channel DMA accelerate memory-moved data acquisition with minimal CPU intervention, while PPS remaps digital peripherals to almost any I/O pin, easing PCB layout. Typical applications include USB audio peripherals, low-cost graphics HMI, sensor hubs, home automation controllers, and small industrial control nodes. The 36-pin VTLA package and rich peripherals also suit wearable designs, capacitive-touch human interfaces, and battery-powered IoT endpoints where 32-bit performance and USB connectivity are required. When designing, plan I/O budgeting around the 21 available GPIO pins and use PPS to remap peripherals for routing simplicity. Pay attention to decoupling and to grounding the exposed thermal pad for thermal and EMI performance. This page consolidates distributor pricing, validated drop-in alternatives, and practical design notes not directly aggregated in the manufacturer datasheet, helping procurement and firmware teams make informed decisions.

견적 요청 문의하기
PIC32MX150F128C-V/TL - 32-bit MCU 128KB Flash 40MHz | Microchip
PIC32MX150F128C-V/TL

PIC32MX150F128C-V/TL - 32-bit MCU 128KB Flash 40MHz | Microchip

The Microchip Technology PIC32MX150F128C-V/TL is a 32-bit microcontroller built on the MIPS32 M4K core, delivering 40 MHz of processing performance with 128 KB of Flash program memory and 32 KB of SRAM, all housed in a 36-pin VTLA (5x5 mm) package. It targets low-cost, low-power embedded applications requiring USB, audio/graphics peripherals, and advanced analog. The device is AEC-Q100 qualified for automotive designs and operates from a 2.3V to 3.6V supply. A microcontroller (MCU) is a single-chip computer containing a CPU core, program memory (Flash), data memory (SRAM), and integrated peripherals such as timers, ADC, communication interfaces, and I/O. The PIC32MX family sits within Microchip's broader 32-bit portfolio (PIC32 > MIPS MCU > embedded processor > semiconductor IC), offering a balance of performance, peripherals, and power efficiency for connected embedded systems. Key features include five 16-bit timers, a 10-bit 1 Msps ADC with up to 16 channels, two UART, two I2C, two SPI, PMP (Parallel Master Port), USB 2.0 full-speed device/host/OTG, peripheral pin select (PPS) for flexible signal routing, RTCC, CTMU (charge time measurement unit) for capacitive touch, and up to 21 general-purpose I/O lines. Internal 8 MHz and 32 kHz oscillators reduce external component count. Architecturally, the M4K core is a 5-stage pipeline Harvard architecture delivering 1.56 DMIPS/MHz. Separate PLLs drive the system clock and USB clock, enabling flexible baud-rate generation. A 4-channel DMA engine offloads data movement to lower CPU load. Code is programmed via ICSP (In-Circuit Serial Programming) or JTAG using any PGECx/PGEDx pair. Typical applications include USB HID peripherals, sensor interfaces with capacitive touch, automotive body controllers, audio playback devices, simple graphics displays, and low-cost IoT nodes. The USB, RTCC, and CTMU peripherals make it well-suited for connected sensor hubs and HMI subsystems. Design tip: ensure all VDD and VSS pins are connected and decoupled with 100 nF ceramic capacitors placed close to the package. For USB applications, the VUSB pin requires a 100 nF bypass to ground and a 10 uF bulk capacitor. This page synthesizes distributor pricing, AEC-Q100 qualification status, drop-in alternatives within the PIC32MX family, and practical design notes not consolidated in the manufacturer datasheet.

견적 요청 문의하기
PIC32MX150F128CT-50I/TL - 32-bit MCU 128KB Flash 50MHz | Microchip
PIC32MX150F128CT-50I/TL

PIC32MX150F128CT-50I/TL - 32-bit MCU 128KB Flash 50MHz | Microchip

The Microchip Technology PIC32MX150F128CT-50I/TL is a 32-bit MIPS32 M4K microcontroller operating at 50MHz with 128KB of FLASH program memory and 32KB of SRAM, housed in a 36-pin VTLA (5x5 mm) package with an exposed thermal pad. The device operates from a 2.3V to 3.6V supply and supports industrial-grade temperature range from -40C to +85C. A PIC32MX series microcontroller is a 32-bit MCU based on the MIPS32 M4K core, designed by Microchip for embedded applications requiring higher performance than 16-bit PIC microcontrollers. Within the broader system hierarchy, PIC32MX devices sit between PIC24F (16-bit) and PIC32MK/MZ (32-bit high-performance) families, falling under the umbrella of MIPS-based 32-bit microcontrollers and the wider category of embedded microcontrollers. The PIC32MX1XX/2XX 28/36/44-pin family specifically targets cost-sensitive applications requiring USB, advanced peripherals, and graphics/audio interfaces. The M4K core executes most instructions in a single cycle, giving the 50MHz part 50 Dhrystone MIPS of performance. Key features of the PIC32MX150F128CT-50I/TL include up to 25 I/O pins, two UART modules, two I2C modules, two SPI modules, a Parallel Master Port (PMP), 10-bit ADC with up to 12 channels, 5 PWM, Peripheral Pin Select (PPS) functionality for flexible pin assignment, hardware DMA with up to 4 channels, and JTAG programming/debug interface. The exposed pad on the VTLA package improves thermal dissipation for higher-current applications. Architecturally, the device integrates a Harvard architecture with separate instruction and data paths, configurable interrupt controller supporting up to 64 interrupt sources with 7 priority levels, and multiple low-power sleep modes (idle, sleep, deep-sleep) for power-constrained applications. The integrated USB 2.0 full-speed controller supports both device and host/OTG modes when paired with proper external components. Typical applications include industrial automation (PLCs, motor control interfaces), consumer audio/graphics interfaces with USB connectivity, USB peripherals such as mice, keyboards, and Human Interface Devices (HIDs), portable data loggers, sensor hubs, and low-cost graphics display controllers. The combination of 128KB Flash, 32KB RAM, USB, and PMP makes it suitable for applications traditionally served by more expensive Cortex-M0+ devices. A key design consideration is power supply decoupling. Place a 0.1uF ceramic bypass capacitor as close as possible to each VDD/VDDCORE pin and a bulk 10uF tantalum or ceramic capacitor near the package to ensure stable operation. Use the exposed pad as a thermal dissipation path by soldering it to a copper pour on the PCB. This page synthesizes distributor pricing, drop-in alternatives within the PIC32MX family, and practical design notes not found in the manufacturer datasheet, providing actionable engineering guidance for embedded system designers selecting this MCU.

견적 요청 문의하기
PIC32MX150F128CT-I/TL - 32-bit MCU, 128KB Flash, 40MHz | Microchip
PIC32MX150F128CT-I/TL

PIC32MX150F128CT-I/TL - 32-bit MCU, 128KB Flash, 40MHz | Microchip

The Microchip PIC32MX150F128CT-I/TL is a 32-bit MIPS M4K microcontroller with 128KB Flash and 32KB SRAM operating at 40MHz, housed in a 36-pin VTLA (5x5 mm) package with exposed thermal pad. The device features 21 general-purpose I/O lines, integrated USB 2.0 full-speed OTG, and CTMU/RTCC peripherals. A 32-bit PIC microcontroller (MCU) is a programmable embedded processor that executes instructions on a 32-bit datapath, enabling higher computational throughput than 8-bit or 16-bit MCUs while remaining deterministic for real-time control. The PIC32 family sits at the top of Microchip's PIC hierarchy under the broader microcontroller taxonomy: MCU -> 32-bit MCU -> MIPS-based MCU -> PIC32 -> PIC32MX performance series. The M4K core implements the MIPS32 release-2 instruction set with hardware multiply/divide, single-cycle hardware MAC, and 5-stage pipeline, delivering 1.56 DMIPS/MHz and 40 MHz operation suitable for audio decoding, graphics rendering, and USB-connected peripherals. Key features include 128KB single-cycle Flash with prefetch, 32KB SRAM, hardware Multiply/Divide, USB 2.0 full-speed OTG with on-chip transceiver, four hardware DMA channels, five 16-bit timers, two UART modules, two I2C modules, and up to 13 analog input channels on a 10-bit ADC. Peripherals are routed via Peripheral Pin Select (PPS), allowing flexible function placement across I/O pins. Five power-management modes (Run, Idle, Sleep, Deep Sleep, VBAT) minimize quiescent draw for battery-connected designs. The PIC32MX150F128CT-I/TL integrates a 4-channel hardware DMA engine that offloads memory-to-peripheral transfers without CPU intervention, freeing core cycles for application logic. Separate PLLs for CPU and USB clocks allow the CPU to run at 40 MHz while maintaining the precise 48 MHz USB clock required by USB 2.0 full-speed. The CTMU (Charge Time Measurement Unit) supports touch-sense, capacitive proximity, and time-of-flight measurements; the RTCC retains a calendar clock from a 32.768 kHz source during deep-sleep. The 36-pin VTLA package exposes a thermal pad for improved theta-JA. Typical applications include USB HID peripherals (keyboards, mice, custom input devices), audio playback with USB streaming, low-cost graphics LCD controllers, capacitive touch user interfaces, sensor hubs, and battery-powered IoT nodes. The integrated USB transceiver and 32KB SRAM make it especially suitable for USB-class devices where discrete USB PHY cost would otherwise inflate the BOM. When designing with this part, route the USB DP/DM traces as a 90-ohm differential pair with matched length, place the 27-ohm series resistors close to the pins, and provide a solid ground reference beneath the traces. The exposed thermal pad must be soldered to a top-layer copper pour with multiple thermal vias to keep junction temperature within limits under USB bus-powered operation. This page synthesizes distributor pricing, drop-in PIC32 alternatives, and practical design notes not found in the manufacturer datasheet.

견적 요청 문의하기
PIC32MX150F128CT-V/TL - 32-bit MCU 128KB Flash 40MHz 36-VTLA | Microchip
PIC32MX150F128CT-V/TL

PIC32MX150F128CT-V/TL - 32-bit MCU 128KB Flash 40MHz 36-VTLA | Microchip

The Microchip Technology PIC32MX150F128CT-V/TL is a 32-bit MIPS32 M4K microcontroller running at 40 MHz, integrating 128 KB of Flash program memory and 32 KB of SRAM, and packaged in a 36-pin VTLA (5x5 mm) thermally enhanced QFN with an exposed pad. The -V variant specifies an AEC-Q100-grade operating temperature range of -40C to +105C, while the -T suffix indicates Tape and Reel packaging for high-volume assembly. The device integrates USB 2.0 full-speed On-The-Go, a 10-bit 1 Msps Analog-to-Digital Converter with up to 12 input pins, five 16-bit timers, two UART, two I2C and two SPI peripherals, plus Peripheral Pin Select (PPS) for flexible I/O routing. Microcontrollers (MCUs) are programmable semiconductor devices that integrate a CPU core, memory and a rich set of digital and analog peripherals on a single die. The PIC32MX1xx family specifically targets cost-sensitive, USB-enabled embedded applications by combining a 32-bit MIPS core (linear-regulator-class successor to PIC24/dsPIC) with a 5-volt-tolerant I/O ring and a USB PHY, occupying the tier below higher-end PIC32MX3xx/4xx/5xx/6xx/7xx parts. Key features that differentiate this part include a hardware DMA controller with four channels and automatic data-size detection, two separate PLLs for the CPU and the USB 48 MHz clock, a configurable Watchdog Timer with an on-chip low-power RC oscillator, and multiple low-power modes (Idle, Sleep) that drop quiescent current to microamp levels. The 5-volt-tolerant I/O and Audio/Graphics-compatible PWM/CCP make it well suited for cost-sensitive consumer and industrial Human-Machine Interface boards. Architecture-wise, the PIC32MX1xx is built on a 32-bit MIPS M4K Harvard architecture featuring separate Flash and SRAM buses, a single-cycle hardware multiplier/divider, and a Prefetch Cache that hides Flash wait states. Compared with the older PIC24/dsPIC families, the M4K core executes most instructions in a single cycle and offers significantly higher code density for C workloads, while remaining code-compatible with the MPLAB XC32 toolchain. Typical applications include low-cost USB Human Interface Devices (HID), small audio playback devices using PWM or I2S bridges, graphic LCD control panels, low-end embedded WiFi/BLE gateways, and industrial sensor nodes requiring ADC sampling above 250 kHz. The combination of USB-OTG and 12-bit 1 Msps ADC also opens the door to data-acquisition front-ends and USB-CDC virtual COM ports on factory-floor equipment. When designing with this MCU, note that the VTLA package has an exposed thermal pad that MUST be soldered to the PCB ground plane for proper thermal dissipation and electrical performance. For best USB-2.0 signal integrity, route the D+/D- lines as a 90-ohm differential pair and supply VBUS with a 4.7 uF bulk capacitor per the USB specification. This page synthesizes distributor pricing, drop-in alternatives within the same PIC32MX1xx family, and practical design notes that go beyond the manufacturer datasheet, giving engineers a single reference for evaluation, sourcing and second-source qualification.

견적 요청 문의하기
PIC32MX150F128D-50I/ML - 50MHz 32-bit MCU 128KB Flash | Microchip
PIC32MX150F128D-50I/ML

PIC32MX150F128D-50I/ML - 50MHz 32-bit MCU 128KB Flash | Microchip

The Microchip Technology PIC32MX150F128D-50I/ML is a 32-bit MIPS M4K microcontroller delivering 50 MHz CPU performance with 128 KB Flash and 32 KB SRAM, housed in a 44-pin QFN (ML) 8x8 mm package with an exposed thermal pad. It is part of the PIC32MX1XX/2XX family targeting low-power, mixed-signal embedded designs with USB, audio, and graphics peripherals. A 32-bit microcontroller (MCU) is a programmable processor that integrates a CPU core, memory, and peripherals on a single silicon die; PIC32MX1XX/2XX devices use the MIPS32 M4K core, placing them in the broader taxonomy of 32-bit microcontrollers -> microcontrollers -> embedded processors -> semiconductors. PIC32MX parts are widely adopted for cost-sensitive 32-bit designs where ARM Cortex-M parts are over-specified. Key features include two I2S/SPI modules for codec and serial audio, Peripheral Pin Select (PPS) for flexible signal routing, a Parallel Master Port (PMP) for graphics and external memory interfaces, a Charge Time Measurement Unit (CTMU) supporting mTouch capacitive touch sensing with 1 ns resolution, on-chip temperature measurement, and USB 2.0 full-speed device/host/OTG. The part operates from 2.5 V or 3.3 V with less than 0.5 mA/MHz active current consumption, suiting portable and USB-powered designs. Architecturally, the M4K core offers single-cycle hardware multiply/divide and a 5-stage pipeline, providing deterministic interrupt latency. The 128 KB Flash and 32 KB SRAM are accessible through the unified 32-bit bus, while the PMP module can address up to 16 MB of external memory in master mode - useful for graphics and audio buffer extensions. Typical applications include USB audio devices (headsets, dongles, MIDI controllers), capacitive touch user interfaces (mTouch sliders and buttons), low-cost graphics HMI with PMP-connected TFT panels, industrial control front-ends with USB connectivity, and portable consumer electronics requiring 32-bit math without ARM licensing overhead. When designing with this device, plan I/O carefully: PPS lets remap most digital peripherals to alternate pins, but analog and oscillator pins are fixed. Use the exposed pad (EP) of the QFN-44 package as the primary thermal and ground return path - it must be soldered to a continuous copper pour for rated performance. This page synthesizes DigiKey distributor pricing, Microchip family drop-in alternatives from the same PIC32MX1XX/2XX series, and practical design notes - information beyond the manufacturer datasheet cover sheet.

견적 요청 문의하기
PIC32MX150F128D-50I/TL - 50MHz 32-bit MCU 128KB Flash | Microchip
PIC32MX150F128D-50I/TL

PIC32MX150F128D-50I/TL - 50MHz 32-bit MCU 128KB Flash | Microchip

The Microchip Technology PIC32MX150F128D-50I/TL is a 32-bit MIPS M4K microcontroller running at 50 MHz with 128 KB of Flash program memory and 32 KB of SRAM, housed in a 44-pin VTLA (6x6 mm) surface-mount package. It is part of the PIC32MX1XX/2XX family, which integrates USB 2.0 (Full-Speed), two I2S/SPI modules, a Parallel Master Port (PMP), a 10-bit ADC, and a Charge Time Measurement Unit (CTMU) for mTouch capacitive sensing. A 32-bit microcontroller (MCU) is a programmable system-on-chip that combines a CPU core, volatile memory (SRAM), non-volatile memory (Flash), and multiple peripheral interfaces on a single silicon die. Within the broader hierarchy of microcontrollers, the PIC32MX family belongs to the 32-bit MCU category, itself a sub-category of microcontrollers, embedded processors, and ultimately semiconductors. 32-bit MCUs are typically chosen over 8-bit or 16-bit parts when applications require more than 64 KB of code space, hardware USB, or graphics-oriented peripherals such as PMP for TFT displays. Key features of the PIC32MX150F128D-50I/TL include a low active current of less than 0.5 mA/MHz at full speed, Peripheral Pin Select (PPS) for flexible peripheral-to-pin mapping, two I2S/SPI modules for codec and serial communication, PMP for graphics interfaces, support for mTouch capacitive touch buttons and sliders, and a high-resolution 1 ns time-measurement capability. The device operates from 2.3 V to 3.6 V and supports industrial temperature range parts (-40C to +85C). The architecture combines a MIPS32 M4K RISC core with a 5-stage pipeline, Harvard bus structure, single-cycle hardware multiply/divide, and tightly coupled peripherals. PPS remapping allows designers to assign peripherals to available I/O pins without redesigning the PCB. The 10-bit ADC provides up to 1 Msps conversion with on-chip sample-and-hold, and the CTMU enables capacitive touch measurement, time-of-flight, and accurate pulse generation. Typical applications include USB audio devices, mTouch capacitive touch panels, low-cost graphics displays via PMP, sensor hubs, and general-purpose embedded control. The wide peripheral mix makes this MCU particularly attractive for cost-sensitive consumer electronics requiring USB plus graphics in a single chip. When designing with the PIC32MX150F128D-50I/TL, plan the decoupling network with a 0.1 uF capacitor on each VDD pin and a bulk 4.7 uF to 10 uF tantalum/ceramic capacitor near the regulator. The VTLA package has an exposed thermal pad that must be soldered to the ground plane for mechanical stability and thermal dissipation. This page synthesizes distributor pricing, drop-in pin-compatible alternatives in the same 44-pin VTLA footprint, comparison parameters, and practical design notes not found in the manufacturer datasheet alone.

견적 요청 문의하기
PIC32MX150F128D-I/ML - 32-bit MCU 128KB Flash 32KB RAM 44-QFN | Microchip
PIC32MX150F128D-I/ML

PIC32MX150F128D-I/ML - 32-bit MCU 128KB Flash 32KB RAM 44-QFN | Microchip

The Microchip Technology PIC32MX150F128D-I/ML is a 32-bit MIPS M4K RISC microcontroller with 128 KB Flash, 32 KB SRAM, and USB 2.0 full-speed support, housed in a 44-pin QFN (ML) 8x8 mm package. It runs at up to 40 MHz (industrial grade, -40C to +85C) with sub-0.5 mA/MHz active current, and integrates Peripheral Pin Select (PPS), a Parallel Master Port (PMP) for graphics interfaces, two I2S/SPI modules for codec connectivity, and a Charge Time Measurement Unit (CTMU) supporting mTouch capacitive touch and 1 ns high-resolution time measurement. What is a 32-bit MCU? A microcontroller (MCU) is a single-chip computer that integrates a CPU core, program memory (Flash), data memory (SRAM), and peripherals such as timers, ADCs, and communication interfaces. The PIC32MX1XX/2XX family uses the MIPS32 M4K core, placing these parts in the microcontroller -> 32-bit MCU -> MIPS-based MCU -> embedded controller taxonomy, and within Microchip's broader portfolio they sit alongside the PIC24 and dsPIC families as general-purpose embedded controllers with DSP-class throughput. Key features of the PIC32MX150F128D-I/ML include five 16-bit timers/counters, two I2C ports, two UART ports, two SPI/I2S ports, a 10-bit 1 Msps ADC with up to 28 analog inputs, an on-chip temperature sensor, a 5-bit DAC, and 34 digital I/O pins. PPS allows remapping of digital peripheral signals to most I/O pins, simplifying PCB routing in densely packed designs. Architecturally, the part uses a 5-stage pipeline MIPS32 M4K core with hardware multiply/divide and a Prefetch Cache Module that fetches 16-bit words from Flash and presents 32-bit instructions to the core. The dual-bank Flash with live-update support enables in-field firmware upgrades, and the 32 KB SRAM provides ample headroom for USB stacks, graphics framebuffers, and audio processing buffers. Typical applications include USB audio devices (USB speakers, headphones, and headsets), low-cost graphics HMI with PMP-driven TFT panels, capacitive touch key/slider front panels using CTMU, industrial control with on-chip 10-bit ADC, and consumer devices requiring USB connectivity. The wide peripheral mix and USB make the part a single-chip solution for many USB+graphics products. A key design consideration is that the 44-QFN part exposes fewer I/O than the 64-pin variants; designers needing more pins should consider the PIC32MX150F128D-I/PT (44-TQFP, same pinout assignment) or migrate to PIC32MX250/270 64-pin devices for additional peripherals. Ensure VUSB decoupling follows the USB specification and the VBAT/AVDD rails are properly sequenced. This page synthesizes distributor pricing, drop-in pin-compatible alternatives, and design notes drawn from Microchip datasheets and application notes that are not collated on the manufacturer product page alone.

견적 요청 문의하기