집적 회로

하위 카테고리

📁 ADC/DAC 2518 제품 📁 증폭기 IC 795 제품 📁 오디오 코덱 16 제품 📁 오디오 IC 2 제품 📁 클록 및 타이밍 295 제품 📁 DSP 962 제품 📁 데이터 수집 IC 2 제품 📁 디지털 포텐셔미터 4 제품 📁 디스플레이 드라이버 및 컨트롤러 1 제품 📁 FPGA & CPLD 6666 제품 📁 인터페이스 IC 1577 제품 📁 LED 드라이버 1 제품 📁 로직 IC 305 제품 📁 메모리 IC 875 제품 📁 마이크로컨트롤러 18706 제품 📁 마이크로프로세서 4 제품 📁 모터 드라이버 1 제품 📁 기타 1 제품 📁 Sensor and Detector Interfaces 1 제품 📁 특수 IC 15 제품 📁 비디오 IC 13 제품

제품 (32762)

SY605JZ - 255-Tap Programmable Delay Line | Microchip
SY605JZ

SY605JZ - 255-Tap Programmable Delay Line | Microchip

The Microchip Technology SY605JZ is a programmable delay-line clock and timing IC with 255 taps, 4 ns to 40 ns total delay range, and 15 ps delay resolution in a 28-LCC J-lead package. It supports a true 125 MHz retrigger rate and differential TRIGGER and delay WRITE inputs, making it suitable for deterministic timing alignment in communications, instrumentation, and test systems. The SY605JZ uses one independent delay path and provides less than ±1 LSB timing accuracy. A programmable delay line is a timing-control integrated circuit that introduces a digitally selectable interval between an input edge and its corresponding output. It belongs to the clock-and-timing IC hierarchy, where delay lines support calibration, phase alignment, pulse positioning, and clock compensation. Unlike a general-purpose digital delay, this device provides a calibrated tap-based delay structure for fine timing adjustment. Key features include 255 programmable taps, a 4 ns delay to the first tap, a 40 ns maximum total delay, and 15 ps resolution. Its differential TRIGGER and delay WRITE inputs support robust control-interface design. The less-than-±1-LSB timing-accuracy specification gives engineers a quantified basis for selecting tap values when precise event placement is required. The SY605JZ is intended for high-speed timing systems where deterministic delay calibration and repeatable retriggering matter. Its 125 MHz retrigger rate allows successive trigger events to be accepted at high repetition rates, while the programmable tap count provides fine control over relative timing. The component is packaged as a 28-LCC J-lead device, with tube packaging identified for SY605JZ and tape-and-reel identified for the SY605JZ TR ordering variant. Typical uses include clock phasing, pulse-width calibration, time-interval measurement, communication timing alignment, and laboratory or industrial test equipment. Because it is a delay-line IC rather than a general clock generator, designers should evaluate input edge requirements, output timing, control logic, and PCB propagation effects together when defining the external timing budget. A key design consideration is to preserve controlled edge rates and isolate sensitive timing paths from unnecessary noise. The datasheet-supported TRIGGER and delay WRITE interface should be driven with compatible logic, while power and ground connections should be routed to minimize return-path disturbance. Engineers should also verify all operating conditions against the manufacturer datasheet. This page consolidates distributor pricing, verified timing specifications, package details, and application guidance. It also distinguishes the SY605JZ from SY605JZ TR as a packaging variant rather than presenting the TR suffix as a different functional device, while clearly identifying where a full pinout or verified drop-in substitute is unavailable in the supplied data.

견적 요청 문의하기
SY69952ZC - 155.52Mbps Clock Recovery IC | Microchip
SY69952ZC

SY69952ZC - 155.52Mbps Clock Recovery IC | Microchip

The Microchip Technology SY69952ZC is an OC-3/STS-3 clock-recovering transceiver operating at 155.52 Mbps with one output in a 28-SOIC package. It combines an ATM-compatible transmitter and receiver with clock and data recovery for Ethernet, SONET/SDH, and ATM transport equipment. The verified device data identifies the SY69952 family as a single-chip OC-3/STS-3 solution and specifically associates SY69952ZC with a 28-pin SOIC package. A clock-recovering transceiver is a clock-and-timing semiconductor that accepts high-speed serial data, recovers timing from the incoming signal, and supports transmission and reception within optical or network transport systems. In the broader hierarchy, it belongs to clock and timing ICs, interface ICs, and semiconductor signal-path components. Its primary value is integrating functions that otherwise require separate transmitter, receiver, and clock-recovery circuitry. The verified features include complete ATM-compatible single-chip transmitter and receiver integration, operation at 155.52 Mbps, one recovered-clock output, and compatibility with named ATM processor platforms. The available documentation also indicates seamless operation with PM5345, VNS67200, WAC-013-B/WAC-413-A, and NEC µPD98402 UNI processors. Electrical ratings, supply voltage, recovery thresholds, jitter performance, operating temperature, and package dimensions were not supplied in the retrieved data and therefore must be confirmed from the original manufacturer datasheet. SY69952ZC is suited to ATM and SONET/SDH equipment, OC-3/STS-3 line-interface assemblies, optical transport modules, network processor interfaces, and legacy synchronous multiplexing systems. Its 28-SOIC construction favors conventional surface-mount assembly, but high-speed signal integrity still depends on controlled impedance routing, solid return paths, and careful power-supply decoupling. The device should be evaluated against the original datasheet and processor-interface requirements before use in a new design. A key design consideration is that this is a legacy OC-3/STS-3 clock-recovery device rather than a general-purpose Ethernet PHY. Verify signal rates, logic levels, recovered-clock jitter, reference-clock requirements, and processor timing before replacing it with any modern interface. Lifecycle status and a documented drop-in replacement could not be established from the supplied results. This page consolidates the verified source links, procurement data availability, application context, and unresolved engineering information without inventing missing specifications.

견적 요청 문의하기
SY69952ZH - 155.52Mbps Clock Recovery IC | Microchip
SY69952ZH

SY69952ZH - 155.52Mbps Clock Recovery IC | Microchip

The Microchip Technology SY69952ZH is an OC-3/STS-3 clock-recovering transceiver with a stated operating rate of 155.52Mbps, one output, and a 28-pin SOIC package. It combines clock and data recovery with PECL-oriented interface information identified in the verified results. The device is intended for telecommunications equipment using Ethernet, SONET/SDH, and ATM-related transports, where recovered timing must be extracted from a high-speed serial signal. A clock and data recovery transceiver, or CDR, is an integrated circuit that receives a serial data stream, separates or reconstructs its timing relationship, and produces aligned clock and data outputs. In the optical-transport hierarchy, it sits between the line-side high-speed interface and downstream digital logic. The SY69952ZH is therefore a timing-integrity component rather than a general-purpose clock generator or ordinary digital interface IC. The verified product information identifies OC-3/STS-3 operation, a 155.52Mbps rate, PECL input information, one output, and compatibility with several ATM UNI processors. A separate technical result describes a clock-generator input range of 6.41MHz to 19.64MHz, but the supplied excerpts do not establish how that range maps to every operating mode, supply condition, or pin function. Engineers should therefore use the manufacturer datasheet for final acquisition and circuit-design decisions. The 28-SOIC package offers through-hole assembly in a 7.50mm-wide body format according to the distributor result. Its size and pin count make it practical for legacy telecommunications boards, industrial transmission equipment, and repair or modernization programs. The package is not a modern high-density surface-mount ball-grid-array solution, so board area and manual or automated through-hole compatibility should be considered. Typical uses include ATM UNI links, SONET/SDH tributary-rate equipment, Ethernet transport modules, and OC-3/STS-3 line cards. The recovered-clock function is valuable when the receiver must regenerate a stable timing reference before forwarding payload data. The verified material does not provide a full electrical characterization, recommended decoupling, propagation-delay distribution, jitter specification, or absolute maximum-rating table. When designing a replacement board, verify every pin against the official datasheet and preserve the original channel-length and impedance layout. PECL interfaces are sensitive to biasing, termination, trace geometry, and return paths, so a nominal pin-compatible package alone does not guarantee signal-integrity equivalence. Confirm supply voltage, logic thresholds, reference-clock requirements, and recovery-loop behavior before production use.

견적 요청 문의하기
SY88803VKG - 155Mbps PECL Limiting Post Amplifier | Microchip
SY88803VKG

SY88803VKG - 155Mbps PECL Limiting Post Amplifier | Microchip

The Microchip Technology (formerly Micrel) SY88803VKG is a 3.3V/5V, 155Mbps PECL low-power limiting post amplifier with a TTL Loss-of-Signal (LOS) output, housed in a 10-pin MSOP package. It is designed specifically for fiber-optic receiver front ends that follow a transimpedance amplifier (TIA). A limiting post amplifier is the second stage in an optical receiver signal chain. The linear signal output from a TIA can contain significant amounts of noise and may vary widely in amplitude; a limiting amplifier converts this small, noisy differential signal into a clean, fixed-amplitude logic-level PECL data stream, restoring signal integrity before clock-and-data-recovery (CDR) circuitry. In the hierarchy of optical receiver electronics, it sits between the TIA and the CDR/serializer, and is a form of special-purpose high-speed amplifier IC. Key features include single 3.3V or 5V supply operation to 155Mbps, low-noise PECL differential data outputs, a chatter-free TTL Loss-of-Signal output, a TTL /EN enable input for power management, and a programmable LOS assertion threshold. Low power consumption suits compact optical modules such as OC-3/STM-1 and Fast Ethernet transceivers. Architecturally, the device uses a cascade of wideband differential gain stages with automatic offset compensation; the saturating output stages guarantee constant output swing regardless of input amplitude above sensitivity. The programmable LOS threshold lets designers match the trip point to the optical module sensitivity budget, and the chatter-free hysteresis design prevents false LOS toggling near threshold. Typical applications include 155Mbps fiber-optic receivers, SDH/SONET OC-3 line cards, Fast Ethernet (100Base-FX) optical modules, and industrial fiber links. It connects directly to typical TIAs, making it a drop-in signal-chain element. Design consideration: route the differential PECL outputs as 50-ohm controlled-impedance pairs and decouple the supply pins close to the package to keep jitter low; verify the LOS threshold setting against the TIA output amplitude range. This page synthesizes distributor pricing, drop-in alternatives, and practical design notes not found in the manufacturer datasheet.

견적 요청 문의하기
SY89426JC - 622.08MHz SONET Clock Synthesizer | Microchip
SY89426JC

SY89426JC - 622.08MHz SONET Clock Synthesizer | Microchip

The Microchip SY89426JC is a clock and frequency synthesizer IC that generates 622.08 MHz and 155.52 MHz clocks for SONET OC-12 and OC-3 systems, with a maximum output frequency of 622.08 MHz and a 28-pin J-lead LCC package. A clock synthesizer is a timing IC that derives one or more precisely related output frequencies from an external reference clock. Within the hierarchy of clock and timing integrated circuits, it supports communication infrastructure requiring low deterministic jitter, consistent frequency relationships, and multiple logic-compatible outputs. The SY89426JC uses TTL/CMOS-compatible inputs and provides PECL clock outputs. The device provides a single-chip source for 622.08 MHz and 155.52 MHz clocks. Its 622.08 MHz output is differential PECL, while the 155.52 MHz output is single-ended PECL. It also includes a reference output and supports SONET-compliant jitter performance stated as 0.01 UI in the retrieved technical data. The SY89426JC is intended for telecommunications equipment operating at SONET OC-12 and OC-3 line rates. The 622.08 MHz and 155.52 MHz outputs support clock generation in line-card, transceiver, and network-interface designs where a local oscillator must provide both high-speed and divided timing signals. Use controlled-impedance routing for the differential 622.08 MHz output and provide compliant termination and decoupling close to the device. The 28-LCC package is a leaded ceramic package, so thermal performance and assembly compatibility should be checked against the PCB footprint and manufacturing process. This page consolidates verified distributor specifications, package information, datasheet links, and design-oriented guidance for the SY89426JC clock synthesizer.

견적 요청 문의하기
SY89426JI - 622.08MHz SONET Clock Synthesizer | Microchip
SY89426JI

SY89426JI - 622.08MHz SONET Clock Synthesizer | Microchip

The Microchip Technology SY89426JI is a clock and frequency synthesizer IC that generates 622.08 MHz and 155.52 MHz clocks for SONET OC-12 and OC-3 systems. Its primary high-speed output is differential PECL, its 155.52 MHz output is single-ended PECL, and it accepts TTL/CMOS-compatible reference inputs. The device is packaged in a surface-mount 28-LCC J-lead package. A clock synthesizer is a timing IC that derives one or more internally regulated clock outputs from an external reference. Clock synthesizers belong to the clock and timing IC hierarchy, where they support communication links, network equipment, and test systems by distributing frequencies with controlled phase and jitter. In a SONET design, accurate clocks are essential because transmit and receive hardware must process high-speed serial data within defined timing margins. The SY89426JI provides a single-chip source for both 622.08 MHz and 155.52 MHz clock frequencies. The verified device description identifies SONET-compliant jitter performance of 0.01 UI. Differential PECL at 622.08 MHz is suited to high-speed serial links, while the single-ended PECL output at 155.52 MHz supports parallel or lower-rate clocking requirements. TTL/CMOS-compatible inputs and a reference output simplify integration with external oscillators and system clock-distribution networks. Available verified data does not specify the complete electrical limits, supply-voltage range, power dissipation, temperature range, or detailed pin assignments. Those parameters remain marked as data-needed rather than inferred from the device category. Likewise, no manufacturer datasheet URL appears in the supplied search results, so a distributor or indexed datasheet page is retained only as a source reference rather than represented as an official Microchip PDF. Typical uses include SONET optical network equipment, telecommunications line cards, high-speed clock-distribution assemblies, and instrumentation that needs related OC-12 and OC-3 clock domains. The principal design consideration is interface compatibility: downstream circuits must support differential or single-ended PECL levels, and any unused output or supply pins must be terminated exactly as directed by the complete datasheet. This product page consolidates the verified clock frequencies, logic families, SONET jitter claim, package format, source links, and engineering cautions. It also distinguishes documented functions from unspecified parameters, helping designers evaluate the SY89426JI without converting category-level assumptions into unsupported component specifications.

견적 요청 문의하기
SY89426JY - 622.08MHz SONET Clock Synthesizer | Microchip
SY89426JY

SY89426JY - 622.08MHz SONET Clock Synthesizer | Microchip

The Microchip Technology SY89426JY is a clock/frequency synthesizer IC engineered for SONET OC-3 and OC-12 clock generation. It accepts a 38.88MHz-to-77.76MHz reference input and produces a maximum 622.08MHz clock, with documented TTL input and PECL/TTL output interfaces. The device is packaged in a 28-pin leaded chip carrier, identified by distributors as 28-LCC (J-Lead). Its core role is to derive a high-speed, phase-aligned telecommunications clock from a lower-frequency reference while supporting high-speed digital interfaces. A clock synthesizer is a timing IC that generates, multiplies, or distributes clock signals according to a defined frequency relationship. In the broader semiconductor hierarchy, this product is a clock and timing IC, then a frequency synthesizer, and finally a SONET line-rate clock-generation component. This classification matters because telecom designs require deterministic relationships among reference, payload, and line clocks rather than a general-purpose oscillator. The SY89426JY targets the 51.84MHz, 155.52MHz, 311.04MHz, and 622.08MHz SONET domain through its supported generation function. Verified source data identifies one clock circuit, no PLL, a TTL reference input, PECL and TTL outputs, a maximum frequency of 622.08MHz, and a 28-LCC package. The absence of a PLL is a defining architectural constraint: the synthesizer relies on a supplied reference rather than a phase-locked loop. Distributor descriptions further identify the part as lead-free and intended for industrial-temperature operation, but the supplied evidence does not expose voltage limits, supply current, jitter, output levels, pin names, or complete timing tables. The device is suitable for SONET OC-3 and OC-12 transport equipment, optical-network terminals, line cards, clock-distribution modules, and test equipment that require a 622.08MHz clock. Its multiple logic interfaces allow integration where the next stage accepts PECL or TTL. Because high-speed edges and propagation delays can affect timing integrity, the PCB must provide controlled impedance, short traces, solid return paths, and clean separation between clock and data or noisy power circuitry. When designing around SY89426JY, verify every supply rail, logic threshold, decoupling value, and output termination against the manufacturer datasheet before schematic release. Do not assume generic PECL or TTL termination because device-specific output topology and board-level loading are not present in the supplied data. Differential-clock standards, such as the CML interface referenced by the retrieved datasheet result, may not be available from this part even though CML is common in related SONET devices. This page combines verified distributor specifications, source-qualified data gaps, application context, and replacement constraints. It also distinguishes a true drop-in replacement from a merely functional clock synthesizer, since same-package status, pin compatibility, electrical ranges, and lifecycle availability must all be confirmed before substitution.

견적 요청 문의하기
Si2166-D60-GMR - DVB-S2X/S2/S Satellite TV Demodulator | Skyworks
Si2166-D60-GMR

Si2166-D60-GMR - DVB-S2X/S2/S Satellite TV Demodulator | Skyworks

The Skyworks Si2166-D60-GMR is a digital satellite TV demodulator IC supporting DVB-S, DVB-S2, and DVB-S2X standards in a single CMOS die, housed in a 48-pin QFN (7x7 mm) package. The part integrates a high-performance blind-scan algorithm for all three DVB-S standards and provides a programmable transport stream output interface compatible with all MPEG decoders and conditional access modules. The "D60" suffix denotes the firmware/die revision supporting DVB-S2X alongside legacy DVB-S/S2 reception. A digital TV demodulator is a baseband processor that recovers MPEG transport streams from a tuner-supplied IF signal. In a typical set-top box (STB) or iDTV front-end, a silicon tuner down-converts the RF satellite signal to a low-IF or zero-IF baseband signal, which the demodulator then decodes, error-corrects (LDPC/BCH for DVB-S2X), and outputs as a serial or parallel MPEG transport stream. The Si2166 family sits at the interface between the analog RF front-end and the digital MPEG decoder, and its standards compliance determines whether the end-product can receive next-generation ultra-HD satellite broadcasts. Key features include integrated blind scan for DVB-S/S2/S2X, on-chip blind-lock functionality, an adaptive equalizer for multi-path and weak-signal conditions, DiSEqC 2.x interface support for LNB control, and a flexible GPIO/I2C host control interface. The device operates from typical 1.2V/3.3V supplies and consumes modest power suitable for multi-tuner STB mainboards. Internal ADC and matched-filter blocks eliminate the need for external analog baseband components. Typical applications include DVB-S2X satellite set-top boxes (zapper, PVR, hybrid), integrated digital televisions (iDTVs), Free-to-Air (FTA) receivers, professional IRD (Integrated Receiver Decoder) equipment, and headend monitoring receivers. Designers pair the Si2166-D60-GMR with a companion wideband satellite tuner such as the Si2183 or Si2141 to form a complete RF-to-TS receive chain. When designing with this part, ensure the host processor supplies a stable 3.3V/1.2V rail with adequate decoupling near the supply pins, and route the IF input as a controlled-impedance 50 ohm microstrip. The host I2C bus runs at up to 400 kHz; verify pull-up sizing for the bus capacitance with the demodulator attached. Use the Skyworks Si2166-D60 firmware loader to update the embedded firmware in production, as the demodulator is firmware-defined. This page synthesizes distributor pricing, firmware variant notes, and drop-in alternatives (Si2166-D60-GM, Si2167-D60-GMR) not consolidated on the manufacturer product page. Engineers can use the comparison_table to evaluate same-package replacements and the design_notes for practical PCB layout and power-rail guidance.

견적 요청 문의하기
Si5330B-B00205-GM - 1:4 LVDS Clock Buffer 710 MHz 24-QFN
Si5330B-B00205-GM

Si5330B-B00205-GM - 1:4 LVDS Clock Buffer 710 MHz 24-QFN

The Skyworks Solutions Si5330B-B00205-GM is a 1:4 LVDS low-jitter, low-skew clock fanout buffer and level translator operating up to 710 MHz, housed in a 24-pin QFN with exposed pad. It accepts one single-ended or differential input and produces four differential (or eight single-ended) low-jitter LVDS outputs, making it well suited for high-performance PCB clock distribution. A clock buffer is a fanout device that takes one reference clock and produces multiple, phase-aligned copies for routing across a printed circuit board. Within the broader clock-tree hierarchy, the Si5330B sits between an upstream PLL/oscillator (frequency generation) and downstream transceivers, ASICs, FPGAs, or ADCs (clock consumption). Unlike a PLL-based clock generator, a buffer preserves the input frequency exactly and only regenerates the edges, minimizing added jitter and avoiding frequency translation artifacts. Key features include 710 MHz maximum input/output frequency, LVDS output format, 1:4 fanout, integrated input level translation (1.8 V, 2.5 V, or 3.3 V core with separate output-bank supply), and minimal crosstalk with strong supply-noise rejection. The exposed-pad QFN-24 package provides a low thermal resistance path for noise-sensitive systems. The device uses a differential LVDS output stage with internal source-terminated architecture, yielding sub-picosecond additive jitter at typical reference frequencies. Independent VDD pins for the input core and the output bank allow level translation without external circuitry, simplifying mixed-voltage designs. Typical applications include high-speed ADC/DAC sampling clocks, FPGA logic clock distribution, telecom/datacom line-card reference clocks, and PCI Express or serializer/deserializer reference fanout. Its low jitter makes it ideal for any noise-sensitive clock domain that needs a clean, multi-drop copy of a single reference. When designing with the Si5330B, follow the datasheet recommended termination for both LVDS inputs and outputs (typically 100 ohm differential) and decouple each VDD pin with a 0.1 uF ceramic placed as close to the IC as possible. The exposed pad must be soldered to a continuous ground plane for both thermal dissipation and controlled impedance. The custom B00205 ordering code defines the factory-set input/output configuration, so verify the variant matches your board's required direction. This page synthesizes distributor pricing, drop-in alternatives, and practical design notes not found on any single distributor listing.

견적 요청 문의하기
Si5330B-B00205-GMR - 1:4 LVDS Clock Buffer 710MHz | Skyworks
Si5330B-B00205-GMR

Si5330B-B00205-GMR - 1:4 LVDS Clock Buffer 710MHz | Skyworks

The Skyworks Solutions (formerly Silicon Labs) Si5330B-B00205-GMR is a 1:4 LVDS low-jitter, low-skew fanout clock buffer and level translator housed in a 24-pin QFN-EP (4x4 mm) package. It accepts a single input clock and produces four differential LVDS outputs (or eight single-ended outputs) at frequencies from 5 MHz to 710 MHz, with guaranteed low additive jitter, low skew, and low propagation delay variability. A clock fanout buffer (also called a clock driver or clock distributor) is a semiconductor device that receives one input clock reference and replicates it onto multiple low-skew output clocks. Clock buffers sit in the timing-distribution hierarchy between an upstream PLL/oscillator and downstream loads such as FPGAs, ASICs, ADCs, DACs, and SerDes transceivers. By regenerating edges locally, they isolate the source from load-induced jitter and provide the deterministic phase alignment that high-speed digital links require. Differentiating features of the Si5330B family include a glitchless switching mux for redundant clocking applications, minimal cross-talk between outputs, and superior supply noise rejection that simplifies low-jitter distribution in noisy PCB environments. The device uses advanced CMOS technology, supports independent core and output-bank supply pins for integrated level translation without external circuitry, and accepts CML, HCSL, LVDS, or LVPECL inputs while driving LVDS outputs. The integrated input terminations remove the need for external resistor networks. From an architectural perspective, the Si5330B employs a precision differential input receiver followed by a low-jitter PLL-free fanout tree. Because the device does not synthesize new frequencies (it simply distributes and level-translates), its additive jitter contribution is small enough to preserve overall system margins even at 710 MHz operation. The output drivers are LVDS-compatible, providing the 350 mV swing required by ANSI/TIA/EIA-644 receivers. Typical additive jitter is in the sub-picosecond RMS range. Typical applications include clock distribution in communications infrastructure, redundant clocking for high-availability servers and storage, level translation between PECL/LVDS domains, and PCB-level fanout for FPGA, ASIC, and processor clock inputs. The wide 5-710 MHz operating range covers virtually all common telecom, networking, and computing reference frequencies. When designing with the Si5330B, designers should size the output-bank and core supply decoupling per Skyworks' reference layout and observe the LVDS receiver termination requirements (typically 100 ohm differential). The exposed pad must be soldered to a low-impedance ground plane for thermal and electrical performance. This page synthesizes distributor pricing, drop-in alternatives from the same Skyworks Si5330 family, and practical PCB layout notes not consolidated in the manufacturer datasheet.

견적 요청 문의하기
Si5341B-B04862-GM - 10-Output Ultra-Low Jitter Clock Generator | Skyworks
Si5341B-B04862-GM

Si5341B-B04862-GM - 10-Output Ultra-Low Jitter Clock Generator | Skyworks

The Skyworks Solutions Si5341B-B04862-GM is a pre-programmed, custom-configured variant of the Si5341B ultra-low jitter any-frequency clock generator family. The device delivers up to 10 differential or single-ended clock outputs at any frequency up to 750 MHz (with <350 MHz jitter-optimized outputs available), in a 64-pin QFN (9x9 mm) package with exposed pad for thermal dissipation. The on-board MultiSynth technology generates independent fractional-N synthesizers per output, allowing non-integer frequency relationships that cannot be realized by integer-N PLLs. A clock generator (also called a frequency synthesizer or PLL-based timing IC) is a mixed-signal integrated circuit that takes one or more low-jitter reference inputs (typically a crystal or LVDS/CMOS reference) and produces one or more precise output frequencies locked to that reference. Within the broader hierarchy it sits as: clock generator -> PLL/VCXO -> timing IC -> power management & signal chain. Unlike a simple clock buffer, a clock generator can translate frequency (e.g., 25 MHz in to 156.25 MHz out), translate format (LVCMOS to LVDS/LVPECL/HCSL/CML), and re-multiply reference, all while adding typically <100 fs RMS phase jitter to the signal. Key features of this Si5341B configuration include typical RMS phase jitter of 50 fs (12 kHz-20 MHz, per the Si5341/40 family datasheet), integrated LDOs that accept a single 1.8V/2.5V/3.3V supply, two differential reference inputs with automatic or manual switching, programmable output slew rate and amplitude, and per-output enable / glitchless start/stop. The device is configured via I2C/SPI and the Skyworks ClockBuilder Pro software. Architecturally the Si5341B combines a low-noise integer-N PLL locking to the reference, a MultiSynth fractional-N divider tree per output, and an output-driver block supporting LVCMOS, LVDS, LVPECL, HCSL, and CML. The MultiSynth architecture eliminates the need for bulky external VCXOs in most applications because any fractional multiplication ratio is supported without integer-boundary spurs. Typical applications include 10G/25G/100G Ethernet PHY clocking, OTN/WDM optical transport line cards, FPGA reference clock trees, broadcast video reference generation, JESD204B/C ADC and DAC sampling clocks, and PCIe Gen3/4/5 clock fan-out. Each output can be set independently so a single Si5341B-B04862-GM can replace multiple crystal oscillators on a high-density PCB. When designing with this part, follow the reference schematic in the Si5341/40 Family Reference Manual exactly. Place the 0.1 µF + 1 µF supply decoupling pair directly at the AVDD/VDD pins, route the reference input traces as 50 Ω controlled-impedance differential pairs, and provide a continuous ground plane beneath the exposed pad with at least 12 thermal vias to the internal layer. This page synthesizes Skyworks datasheet specifications, current distributor pricing as of 2026-10-10, drop-in replacement options within the Si5341/Si5340 family, and practical design notes that complement (but do not replace) the manufacturer documentation.

견적 요청 문의하기
T1014NSN7MQPA - QorIQ 1.2GHz 64-bit Power Arch MPU | NXP
T1014NSN7MQPA

T1014NSN7MQPA - QorIQ 1.2GHz 64-bit Power Arch MPU | NXP

The NXP T1014NSN7MQPA is a single-core 64-bit Power Architecture communications processor from the QorIQ T1 family, running at 1.2 GHz and housed in a 780-pin FBG BGA (23x23 mm) package. It integrates a single e5500 core with Data Path Acceleration Architecture (DPAA) hardware acceleration, DDR3L/DDR4 memory controllers, PCIe, and 1G/10G Ethernet interfaces for high-performance networking and industrial applications. The 0 °C to 105 °C industrial temperature grade and deep-sleep power mode make it suitable for thermally constrained, always-on networking equipment. A microprocessor (MPU) is a single-chip CPU containing the arithmetic logic unit, control unit, registers, cache, and memory management logic needed to execute operating systems and application workloads. Within the SoC hierarchy, an MPU integrates processor cores with on-chip peripherals (memory controllers, bus fabrics, accelerators, networking MACs), distinguishing it from a microcontroller (MCU) which typically targets control loops with on-chip flash. The T1 series occupies the networking/communications tier of NXP's QorIQ lineup, sitting below the multi-core T2/T4 layerscale parts and above the entry P-series. Key features of the T1014NSN7MQPA include a single 64-bit Power Architecture e5500 core at 1.2 GHz, DPAA for packet parsing, classification, and crypto offload, integrated DDR3L/DDR4 controller with ECC, multiple PCIe Gen2 controllers, 1 Gbit Ethernet and 10 Gbit Ethernet MACs, and a deep-sleep low-power mode. Security is handled by the on-chip SEC engine, and the 780-FBGA package exposes the full T1 serial bus, including SerDes lanes for high-speed networking. The DPAA architecture offloads buffer management, queueing, and cryptographic operations from the e5500 core, allowing line-rate packet processing at lower clock frequencies than software-only designs. Compared with general-purpose SoCs, the T1014NSN7MQPA offers deterministic I/O latency and hardware-accelerated networking, which is essential for router, switch, and security appliance workloads. Typical applications include industrial routers, network switches, security gateways, factory automation controllers, and edge networking appliances. The 23x23 mm package footprint is shared across the T1 series, simplifying PCB layout reuse among T1013, T1014, T1023, and T1024 variants. When designing with the T1014NSN7MQPA, allocate adequate PCB area for the 780-ball FBG BGA, plan thermal management for full-power operation, and verify DDR3L/DDR4 routing and impedance per the NXP hardware design guide. For higher core count or throughput, step up to the dual-core T1024 in the same package.

견적 요청 문의하기
T1020NSE7MQB - QorIQ T1 2-Core 1.4GHz e5500 SoC | NXP
T1020NSE7MQB

T1020NSE7MQB - QorIQ T1 2-Core 1.4GHz e5500 SoC | NXP

The NXP T1020NSE7MQB is a dual-core QorIQ T1 communications processor featuring two integrated 64-bit e5500 Power Architecture cores running up to 1.4 GHz, packaged in a 780-pin FCBGA (23x23 mm). The part integrates hardware-accelerated cryptography, an integrated Ethernet switch, DDR3L/DDR4 memory controllers, and the Data Path Acceleration Architecture (DPAA) for high-performance packet processing. What is a QorIQ communications processor? QorIQ is a NXP processor family targeting networking, telecom, and industrial infrastructure. The T1 series sits at the lower-power dual-core end of the QorIQ T lineup, positioned between the single-core T1014 and the quad-core T1040/T2080 tier. These SoCs combine general-purpose Power Architecture cores with hardware assist engines (SEC for crypto, DPAA for packet parsing/queueing, and integrated Ethernet MACs/switch), enabling line-rate L2-L4 processing without external lookup engines. They belong to the broader communications processor hierarchy: SoC -> microprocessor -> communications processor -> embedded processor. Key features of the T1020NSE7MQB include dual 64-bit e5500 cores with hardware hypervisor support, integrated 32-bit DDR3L/DDR4 memory controller with ECC, integrated 1G/2.5G Ethernet switch fabric, SEC 4.0 crypto accelerator, DPAA for parsing/classification/queueing, two PCIe Gen2 controllers, and four SerDes lanes for SGMII/XAUI. Operating temperature range is 0C to 105C, targeting industrial and extended-temperature networking equipment. The 780-FCBGA package supports the high-speed SerDes and memory interfaces required for multi-gigabit switching. Architecturally, the T1020 uses the e5500 core, a 64-bit superscalar Power Architecture implementation with out-of-order execution, integrated MMU, and hardware virtualization (hypervisor) extensions. The DPAA subsystem offloads frame parsing, classification, and queue management to dedicated engines, freeing the e5500 cores for control-plane and application-layer processing. SEC 4.0 accelerates AES, 3DES, SHA, RSA, and ECC, supporting IPSec, TLS/DTLS, and MACsec at line rate. The integrated Ethernet switch eliminates an external PHY/bridging device in small-port-count designs. Typical applications include industrial Ethernet switches (managed 8-24 port switches), factory automation gateways, IEC 61850-3 substation controllers, edge routers, and ruggedized industrial control platforms where 1-2 cores are sufficient for control-plane and protocol conversion but packet-plane needs hardware assist. The 0-105C temperature range allows deployment in outdoor enclosures and industrial cabinets. For design planning: plan the PCB for 23x23 mm FCBGA with microvia stack-up; provide at least 4 PCB layers with dedicated ground references for SerDes lanes; allocate thermal copper under the package to dissipate the typical 8-12W TDP at 1.4 GHz; and validate DDR3L/DDR4 topology against the NXP reference design guidelines for signal-integrity. This page synthesizes distributor pricing, drop-in QorIQ alternatives, and practical design notes not found in the manufacturer datasheet alone.

견적 요청 문의하기
T1023NSE7MQA - QorIQ 2xCPU 64-Bit 1.2GHz MPU | NXP | FCBGA-525
T1023NSE7MQA

T1023NSE7MQA - QorIQ 2xCPU 64-Bit 1.2GHz MPU | NXP | FCBGA-525

The NXP T1023NSE7MQA is a QorIQ communications microprocessor that integrates two 64-bit Power Architecture e5500 cores running at 1.2 GHz, packaged in a 525-ball FCBGA at a 19x19 mm body size. It is engineered for networking, telecommunications, and industrial networked applications that require hardware-accelerated packet processing with strong crypto throughput. A microprocessor (MPU) is a single-chip CPU with integrated peripherals and memory interfaces that executes an operating system and application workloads. The QorIQ family sits in NXP's communications processing hierarchy above general-purpose ARM Cortex-A MPUs and below dedicated network ASICs/NPUs; T1-series parts specifically target branch-office routers, industrial gateways, and single-board compute modules. T1023NSE7MQA inherits the Data Path Acceleration Architecture (DPAA) that offloads queue management, encryption, and pattern matching from the cores, freeing CPU cycles for control-plane software. Key features include dual e5500 cores at 1.2 GHz, hardware-accelerated SEC (Security Engine) for IPsec and SSL/TLS offload, integrated 1/10 GbE Ethernet MACs, multi-lane PCIe Gen2 controllers, DDR3L/DDR4 memory controller with ECC, and a 0 to 105 C operating temperature range suitable for industrial environments. The 525-FCBGA package uses a 0.8 mm ball pitch and provides the signal integrity required for 1.2 GHz core clocks and high-speed SerDes lanes. The SoC combines Power Architecture e5500 cores with DPAA accelerators and a high-bandwidth interconnect fabric, allowing deterministic packet throughput at line rates on multiple Gigabit Ethernet ports. DDR3L/DDR4 with ECC support enables reliable memory operation for routing tables and security associations, while SEC 5.x acceleration handles bulk cryptographic workloads. Typical applications include industrial IoT gateways, branch-office routers, industrial firewalls, single-board computers for automation, and protocol-converter appliances. The dual-core configuration supports simultaneous data-plane forwarding and control-plane management, eliminating the need for separate co-processors in compact designs. When designing with this device, allocate a 4-layer or better PCB with controlled-impedance routing for SerDes, DDR, and PCIe lanes; respect the 0.8 mm BGA pitch with microvia stackups. Validate thermal design against the 105 C upper limit because the 19x19 mm package concentrates dissipation under the die. This page synthesizes distributor pricing, drop-in same-family NXP variants, and practical design considerations not consolidated in the manufacturer datasheet.

견적 요청 문의하기
T1024NSE7MQA - QorIQ Dual-Core 1.2GHz Power Arch SoC | NXP
T1024NSE7MQA

T1024NSE7MQA - QorIQ Dual-Core 1.2GHz Power Arch SoC | NXP

The NXP T1024NSE7MQA is a QorIQ T1 series dual-core communications processor that integrates two 64-bit Power Architecture e5500 cores running at 1.2 GHz, combined with hardware Data Path Acceleration Architecture (DPAA), a SEC crypto engine, DDR3L/DDR4 memory controller, PCIe, and 1/10 GbE networking interfaces, in a 780-pin HFBGA package on a 23x23 mm body with 0 to 105C industrial temperature grade. A communications SoC (System-on-Chip) is an integrated processor that combines CPU cores, memory controllers, hardware accelerators and peripheral interfaces on a single die. QorIQ T1 series SoCs sit within NXP's networking processor hierarchy: application-specific CPU -> embedded communications processor -> SoC -> power-managed networking platform. By integrating DPAA frame queues, SEC encryption, and SerDes for Ethernet and PCIe, the platform eliminates the discrete-asset controller ICs required in legacy designs. Key features include dual e5500 cores up to 1.2 GHz, 64-bit ISA with hypervisor support, an integrated SEC security engine accelerating AES, 3DES, Kasumi, SNOW and public-key algorithms, and built-in DDR3L/DDR4 SDRAM controller with ECC. The HFBGA-780 package exposes 4 SerDes lanes configurable for Aurora, XAUI, PCIe Gen2 and 10 Gigabit Ethernet. Hardware support for IEEE 1588 timestamps, packet parsing and queuing offloads CPU load at line rate. Architecturally the part relies on the Power Architecture e5500 dual-issue superscalar core with symmetric multiprocessing and hardware virtualization hooks. The DPAA engine uses a 16-work-element command queue per BMan/QMan complex for parallel packet dispatch. The integrated SEC block supports both Kasumi and SNOW 3G, suiting the part to LTE control-plane cryptography in addition to wireline IPSec tunnels. Typical applications include industrial control routers, LTE small-cell baseband, fan-less network-attached storage controllers, secure VPN gateways and intelligent IoT gateways. Routing platforms typically pair the T1024NSE7MQA with NXP SGMII PHYs, while control-plane applications use only the SEC block and a small NOR flash footprint. Designers should size decoupling for the HFBGA-780 substrate to keep the 1.2 GHz core within the 0 to 105C thermal envelope, and verify SerDes lane allocation when mapping XFI, PCIe and Aurora on the same SoC. PCB layout must strictly follow the NXP 23x23 mm escape rules for the BGA. This page synthesizes distributor pricing, drop-in alternatives drawn from the QorIQ T1 family, and practical design notes not aggregated on any single manufacturer page.

견적 요청 문의하기
T1024NSN7PQA - QorIQ Dual-Core 1.4GHz PowerPC MPU | NXP
T1024NSN7PQA

T1024NSN7PQA - QorIQ Dual-Core 1.4GHz PowerPC MPU | NXP

The NXP T1024NSN7PQA is a QorIQ communications processor integrating dual 64-bit Power Architecture e5500 CPU cores running at up to 1.4 GHz, paired with a high-performance data path acceleration architecture (DPAA), in a 780-pin HFBGA 23x23 mm package. According to the verified manufacturer description, it supports DDR3L/DDR4 memory, PCI Express Gen2/Gen3 controllers, 1 GbE and 10 GbE interfaces, and targets commercial/industrial thermal grades (0C to 105C). A QorIQ communications processor is a system-on-chip (SoC) microprocessor built on the Power Architecture instruction set, designed for wired and wireless networking equipment. The T1024 belongs to the QorIQ T1 family, which sits in the broader NXP processor taxonomy as: PowerPC e5500 core -> QorIQ T1 communications SoC -> embedded networking MPU -> Power Architecture processor family. This hierarchy positions it between general-purpose microcontrollers (no integrated networking) and high-end multicore QorIQ T2/T4 processors. Key differentiating specifications include the dual e5500 cores (vs. single-core T1014/T1013), 1.4 GHz frequency, hardware-accelerated packet processing via DPAA, integrated SerDes lanes supporting multiple 1 GbE and 10 GbE ports, and a compact 23x23 mm package that maintains pin compatibility with the quad-core T1042 and even the eight-core T2081 for single-PCB scalability. The 780-ball HFBGA package supports the high I/O count needed for multiple Ethernet, PCIe, and DDR interfaces. Architecturally, the T1024NSN7PQA combines Power Architecture e5500 superscalar cores with NXP's Data Path Acceleration Architecture (DPAA), which offloads packet parsing, queue management, and buffer allocation from the cores. This hardware acceleration is critical for line-rate throughput in routers, switches, and network appliances where software-only packet processing cannot scale. Typical applications include industrial routers and switches, network interface cards (NICs), LTE/5G small cell base stations, industrial IoT gateways, and secure networked embedded appliances requiring deterministic packet throughput. The DDR3L/DDR4 controller supports low-power memory operation for thermally constrained designs. When designing with this processor, careful PCB layout is essential - the 780-ball BGA requires microvia or via-in-pad technology, length-matched DDR traces, and a solid ground/power plane stackup. The commercial/industrial temperature grade (0 to 105C) makes it suitable for indoor and outdoor sealed enclosures but not extended-temperature automotive deployments.

견적 요청 문의하기
T1042NSE7MQPB - QorIQ 4x e5500 1.2GHz MPU w/ Crypto | NXP
T1042NSE7MQPB

T1042NSE7MQPB - QorIQ 4x e5500 1.2GHz MPU w/ Crypto | NXP

The NXP T1042NSE7MQPB is a QorIQ communications processor featuring four 64-bit e5500 Power Architecture cores running at up to 1200 MHz, integrated with the Data Path Acceleration Architecture (DPAA) and hardware cryptography acceleration, housed in a 780-pin FCBGA package. It supports DDR3L/DDR4 memory with a high-performance interconnect and a rich set of networking peripheral interfaces required for embedded networking and telecommunications systems. A microprocessor (MPU) is a single-chip processing unit that integrates one or more CPU cores, caches, memory controllers, and I/O peripherals onto one die, forming the central compute engine of an embedded system. The QorIQ T1 family sits within NXP's communications processor portfolio above simple microcontrollers and below high-end Layerscape SoCs, serving as a scalable platform for industrial control, printer/market controllers, and entry-level networking equipment where deterministic performance, hardware offload, and industrial temperature grades are required. Key features include four e5500 cores with double-precision floating point, DPAA for packet parsing, queueing, and crypto acceleration, hardware security engines supporting AES, DES, SHA, RSA, and Kasumi, integrated DDR3L/DDR4 controller, multiple Gigabit Ethernet MACs (SGMII/RGMII), PCIe Gen 2 controllers, SATA, USB, and SerDes interfaces, and an extended industrial operating temperature range of 0 to 105 degrees C with the 'PB' speed/grade suffix and the 'MQ' marking denoting 'No Switch' silicon revision. The architecture pairs high-frequency out-of-order execution cores with tightly-coupled DPAA engines, offloading packet classification, encryption, and queue management from the cores. The result is deterministic throughput on routing, IPSec, and deep packet inspection workloads while keeping the application cores free for control-plane tasks. The 780-pin FCBGA package exposes all DPAA ports and SerDes lanes, enabling single-chip designs for managed switches, routers, and industrial gateways without companion communication ASICs. Typical applications include industrial Ethernet switches, routers and gateways, secure network appliances, multi-function printers and imaging systems, factory automation controllers, and smart-grid / IEC 61850 substation equipment. The 0 to 105C operating range and long-life industrial grade make this part a fit for harsh-environment embedded systems requiring 10+ year product lifecycles. When designing with this device, allocate sufficient PCB real-estate for the 780-pin FCBGA and its associated DDR routing, provide adequate thermal relief for sustained 1.2 GHz operation, and follow NXP's reference design guidelines for power sequencing. The 'No Switch' ('N') suffix indicates the device ships without integrated Ethernet switch fabric, so multi-port designs require external PHY or switch companions. This page synthesizes authorized distributor stock, drop-in T1 family alternatives, and practical layout guidance not always visible in the manufacturer datasheet.

견적 요청 문의하기
T1042NSE7PQPB - QorIQ 4x e5500 1.4GHz MPU | NXP
T1042NSE7PQPB

T1042NSE7PQPB - QorIQ 4x e5500 1.4GHz MPU | NXP

The NXP Semiconductors T1042NSE7PQPB is a QorIQ T1 family communications processor that integrates four 64-bit e5500 Power Architecture cores running at 1400 MHz, with hardware cryptography, DDR3L/DDR4 memory controller, and Data Path Acceleration Architecture (DPAA). It is housed in a 780-ball FC-PBGA (23x23) package and targets industrial temperature ranges (0C to 105C). The device is designed for networked printers and embedded communications applications. A communications processor is a specialized system-on-chip that combines general-purpose CPU cores with hardware offload engines for packet processing, security, and high-speed I/O. Within the broader taxonomy, the T1042 sits at the top of the tree: communications processor -> microprocessor (MPU) -> integrated circuit -> semiconductor. The QorIQ T1 family is a scalable, pin-compatible platform that allows migration down to the dual-core T1022 and up to higher-performance devices such as the T2081, simplifying platform design across product tiers. Key specifications of the T1042NSE7PQPB include four e5500 cores at 1.4 GHz, 32 KB I-cache and 32 KB D-cache per core with 256 KB shared L2 per cluster, integrated SEC cryptography engine, DDR3L/DDR4 memory controller with ECC support, three PCI Express Gen 2 controllers, two SATA 2.0 ports, two USB 2.0 controllers with PHY, two Gigabit Ethernet controllers, and an integrated security engine for IPsec, SSL/TLS, and bulk encryption. The device supports hardware virtualization and implements the DPAA for hardware-assisted queue and buffer management. The architecture combines out-of-order Power Architecture execution with hardware-accelerated data path processing. The e5500 cores implement hardware virtualization through logical partition support and extended interrupt prioritization. The DPAA provides a standardized infrastructure for parallel packet processing, including frame managers, queue managers, and buffer managers that offload packet handling from the cores. Hardware security acceleration includes AES, 3DES, Kasumi, SHA-1/SHA-256, public-key accelerator, and a true random number generator. Typical applications include industrial and networked printers, multi-function peripherals, industrial control and factory automation gateways, ruggedized networking equipment, secure routers and VPN concentrators, and small-form-factor industrial servers. The absence of an integrated Ethernet switch reduces BOM cost for applications that already provide external switching, while the integrated PHYs and SEC engine minimize external component count. When designing with this device, ensure the FC-PBGA-780 substrate has adequate microvia stack-up to route the DDR3L/DR4 byte lanes with matched impedance. The thermal design must account for the 1.4 GHz quad-core power envelope; a heatsink or thermal interface material is recommended at sustained workloads above 70 percent utilization across all four cores. This page synthesizes distributor pricing, drop-in alternatives, and practical design notes not found in the manufacturer datasheet.

견적 요청 문의하기
T2080NSE8MQB - QorIQ T2 4-Core 1.2GHz e6500 MPU | NXP
T2080NSE8MQB

T2080NSE8MQB - QorIQ T2 4-Core 1.2GHz e6500 MPU | NXP

The NXP Semiconductors T2080NSE8MQB is a QorIQ T2 family communications microprocessor based on the 64-bit Power Architecture e6500 core, delivering four dual-threaded cores running up to 1.2 GHz (eight virtual threads) on a 28 nm process. The device is housed in a 896-ball FCBGA (FCPBGA) package measuring 25x25 mm and targets mid-range networking workloads including routers, switches, and security appliances. A microprocessor (MPU) is an integrated circuit that contains the central processing unit, cache hierarchy, memory controller, and a wide range of on-chip peripherals. Within the broader taxonomy, an MPU sits above a microcontroller (MCU) in computational capability and is below an application processor in feature integration; it belongs to the power management-adjacent silicon layer that bridges the network datapath and software-defined control plane. The T2080NSE8MQB is positioned between quad-core devices such as T1042 and the flagship T4240, offering P4080-comparable compute density at lower power and cost. Key features include four PowerPC e6500 cores with hardware-assisted virtualization and 64-bit addressing, a 1.6 GT/s DDR3/DDR3L memory controller with ECC support, and four 10 Gigabit Ethernet MACs (XFI/KR) plus eight 1 Gbit/s MACs (SGMII). Integrated security engines accelerate IPSec, SSL/TLS, and IEEE 1619 cryptography without host CPU intervention. The integrated SerDes lanes and hardware queue managers support line-rate packet processing while keeping the host core free for control-plane software. Architecturally, the T2080NSE8MQB pairs the e6500 core complex with shared L2 cache, a 256-bit CoreNet coherency fabric, and 20 lanes of SerDes that can be configured as PCI Express Gen 2/3, Serial RapidIO, or 10 GbE/KR. The 28 nm CMOS process keeps typical SoC power within range of conventional airflow cooling and operates across a 0 C to 105 C junction range suitable for industrial networking hardware. Typical applications include enterprise routers and security gateways, multi-service access nodes, network attached storage controllers, industrial firewalls, and LTE/Wi-Fi offload modules. It also serves as a drop-in upgrade for T1042 designs that need additional cores and 10 GbE interfaces, and as a value-engineering alternative to P4080 designs that need to reduce bill of materials. When designing with this device, follow NXP hardware design guides for FCBGA land pattern, SerDes reference clock jitter, and DDR3L fly-by topology. Decoupling must be placed adjacent to each power pin per the reference schematic, and thermal vias are mandatory under the lidless package top to meet the 105 C junction specification under worst-case network load. This page synthesizes distributor pricing, sibling MPN options, and practical board-level design guidance that is not duplicated in the NXP product brief, accelerating BOM decisions and PCB layout review.

견적 요청 문의하기
T2080NXE8PTB - QorIQ 8x 1.5GHz 64-bit MPU, 4x10GE | NXP
T2080NXE8PTB

T2080NXE8PTB - QorIQ 8x 1.5GHz 64-bit MPU, 4x10GE | NXP

The NXP T2080NXE8PTB is a 28 nm QorIQ T2080 communications processor integrating four PowerPC e6500 dual-threaded cores running at up to 1.533 GHz with eight virtual threads, delivering 8x 1.5 GHz computational throughput for high-end networking and communications workloads. The device integrates four 10 Gigabit Ethernet controllers, an 1.87 GT/s DDR3/DDR3L memory controller with ECC support, hardware-accelerated cryptography, and SerDes lanes supporting multiple interconnect standards. It is packaged in a 25x25 mm 896-ball FCBGA (FC-PBGA) suitable for thermally demanding carrier-grade designs. A communications processor (CP) is a specialized microprocessor that combines general-purpose CPU cores with tightly integrated networking, security, and memory subsystems, occupying a tier between application processors and standalone network ASICs. Within the embedded taxonomy, the T2080 belongs to the QorIQ T2 series, which itself descends from Power Architecture-based communications platforms spanning L2/L3 switches, base stations, and edge routers. The e6500 core brings the architectural lineage of the T4240 flagship into a more power- and pin-efficient package. Key differentiating specifications include the e6500 dual-threaded core (eight hardware threads across four physical cores), 1.87 GT/s DDR3/DDR3L with ECC, four integrated 10 GbE MACs plus additional lower-speed Ethernet, hardware crypto acceleration, and -40C to +105C industrial temperature range support. The combination of 10 GbE MACs with hardware crypto acceleration in a single 28 nm die enables line-rate secure processing without off-chip coprocessors. The T2080 architecture implements the Book-E enhanced Power ISA with hypervisor-aware virtualization, a coherent fabric interconnecting cores and I/O, and queue manager acceleration for buffer descriptors. The integrated security engine supports symmetric ciphers, public-key algorithms, and true random number generation, offloading what would otherwise consume CPU cycles. Dynamic power management scales per-core frequency and voltage independently, allowing designers to trade throughput against thermals in thermally constrained SFP-router and MEC platforms. Typical applications for the T2080NXE8PTB include enterprise routers, multi-service switches, network-attached storage controllers, industrial gateways, LTE/5G small-cell base stations, and network security appliances. The integrated 4x10G plus multi-port 1G/2.5G Ethernet and hardware crypto make it especially suited for IPsec/SSL VPN gateways and line-rate deep-packet inspection systems. A key design consideration is PCB layout for the 896-ball FCBGA - a multilayer PCB with a continuous ground plane beneath the package is required for signal integrity of the multi-GHz SerDes lanes. Designers must also provide robust heatsinking because at 1.533 GHz the T2080 dissipates substantial power; airflow of at least 200 LFM is typically required for full-speed industrial operation. This page synthesizes distributor pricing, drop-in alternatives, design notes, and comparison tables that go beyond the manufacturer datasheet, helping procurement and design teams make informed decisions for next-generation networking platforms.

견적 요청 문의하기
T2081NSE8PTB - QorIQ T2 4C 1.5GHz 896-FCPBGA | NXP Semiconductors
T2081NSE8PTB

T2081NSE8PTB - QorIQ T2 4C 1.5GHz 896-FCPBGA | NXP Semiconductors

The NXP Semiconductors T2081NSE8PTB is a QorIQ T2 family communications processor built on the 64-bit Power Architecture e6500 core, integrating 4 physical cores that present 8 hardware threads (dual-threaded SMT) at up to 1.533 GHz core frequency. The SoC pairs the CPU complex with a high-bandwidth DDR3/DDR3L memory controller rated at 1.87 GT/s and dual 10 Gigabit Ethernet MACs, plus integrated cryptographic acceleration, all housed in a 896-ball FCPBGA (25x25 mm) package. Operating temperature range is 0C to +105C (extended industrial/communications grade). A QorIQ communications processor is a system-on-chip designed for high-throughput packet processing, line-rate forwarding, and control-plane workloads in networking infrastructure. Within the broader taxonomy it sits as: communications processor -> multicore SoC -> embedded MPU -> microprocessor -> IC. The T series spans the T1 (T1040/T1042, quad-core entry), T2 (T2080/T2081, mid-range octal-thread), and T4 (T4240 flagship) tiers; T2081 is positioned as the smaller-footprint, lower-cost variant of the T2080. Key features include four e6500 dual-threaded cores delivering up to 1.5 GHz / 1.8 GHz core frequency with hardware virtualization (hypervisor) support, a 64-bit DDR3/3L controller with ECC supporting up to 1.87 GT/s, two 10 Gigabit Ethernet ports plus additional 1G/2.5G interfaces, integrated SEC crypto acceleration (SEC 5.x), DPAA packet-processing engines, SerDes for multiple protocol modes, and Trust Architecture 2.x secure boot. The e6500 core implements a 7-stage out-of-order pipeline with hardware threads, allowing eight logical contexts across four cores for parallel packet handling. Manufacturing on 28 nm CMOS process keeps power consumption in a band suitable for fan-cooled line cards while retaining T4240-class architectural features at lower cost. Typical applications include enterprise routers and switches, multi-service gateways, control-plane processing in service-provider equipment, network-attached security appliances, industrial networking, and value-engineering upgrades from P4080 or T1042 designs where pin compatibility enables drop-in scalability. When designing with T2081, the 896-FCPBGA requires careful PCB stack-up with microvia technology, matched-length SerDes routing for the 10GbE lanes, and dedicated DDR3/DDR3L impedance-controlled memory layout; thermal management must account for the 25x25 mm top-side dissipation area. This page synthesizes distributor pricing, drop-in pin-compatible alternatives within the QorIQ T series, and practical design notes covering PCB stack-up, SerDes routing, and thermal dissipation that go beyond the manufacturer datasheet alone.

견적 요청 문의하기
T2081NSE8TTB - QorIQ T2 64-bit 8-thread 1.8GHz SoC | NXP
T2081NSE8TTB

T2081NSE8TTB - QorIQ T2 64-bit 8-thread 1.8GHz SoC | NXP

The NXP T2081NSE8TTB is a QorIQ T2 series communications processor built on a 28 nm CMOS process, integrating four dual-threaded PowerPC e6500 cores at up to 1.8 GHz for an effective eight virtual-core platform. The device is delivered in a 780-ball FC-PBGA package (23x23 mm) and supports DDR3/DDR3L memory at up to 1.87 GT/s, two 10 Gigabit Ethernet controllers plus eight 1 Gbps and four 2.5 Gbps interfaces, and an integrated security engine with crypto acceleration enabled. A QorIQ communications processor is a system-on-chip (SoC) designed for high-throughput wired and wireless networking equipment such as routers, switches, base stations, and network-attached storage. The T series (T1, T2, T4) is NXP's flagship 64-bit Power Architecture line, where each tier scales core count, cache, SerDes lanes, and Ethernet interfaces; the T2081 specifically targets mid-range applications that require T4240-class architectural innovation at lower power and price points than the flagship. Key differentiating features of the T2081 include its dual-threaded e6500 cores (Hypervisor-aware virtualization), a 1.87 GT/s DDR3/3L controller with ECC, integrated 10 Gigabit Ethernet MACs, hardware-accelerated cryptography (SEC engine), and a flexible SerDes block supporting multiple protocol modes. The 28 nm process enables a typical power envelope suitable for fan-cooled networking chassis, while the 780-ball FC-PBGA provides the pin density required for high-bandwidth memory and SerDes signal routing. Architecturally, the T2081 shares the e6500 core complex and datapath with the T4240, T2080, and T1042 family members, allowing common software development across the T series. The chip integrates three PCIe controllers, two SATA 2.0 interfaces, two USB 2.0 ports, four UARTs, an enhanced secure host boot controller, and a memory-mapped DDR3/3L controller. Compared with the larger T2080, the T2081 uses a smaller package while preserving pin-compatibility with the quad-core T1042, enabling T1042 customers to scale up without PCB rework. Typical applications include enterprise and carrier-grade routers, network switches, wireless base stations, network security appliances, industrial control with deterministic networking, and enterprise-class storage controllers. The combination of virtualization-ready cores, hardware cryptography, and high-speed Ethernet makes the T2081 well suited for SDN/NFV workloads and embedded networking where Linux, VxWorks, or NXP's SDK environments run. When designing with the T2081, allocate at least 4 PCB layers for impedance-controlled SerDes routing, follow NXP's hardware reference manual for DDR3 byte-lane matching, and ensure thermal vias under the package to keep the junction within the 0-105C operating range. Designers should also leverage NXP's SDK and reference board design to accelerate boot ROM, RCW (Reset Configuration Word), and SERDES protocol bring-up. This page synthesizes distributor pricing, drop-in alternative MPNs, and practical design notes not consolidated in any single manufacturer PDF. Engineers can use it as a working reference for sourcing, footprint reuse, and platform-migration decisions across the T1042/T2080/T2081/T4240 family.

견적 요청 문의하기
T2081NXE8MQB - QorIQ T2 8x 1.2GHz MPU, 2x10GE, Crypto | NXP
T2081NXE8MQB

T2081NXE8MQB - QorIQ T2 8x 1.2GHz MPU, 2x10GE, Crypto | NXP

The NXP T2081NXE8MQB is a QorIQ T2-series communications processor built on 28 nm CMOS, integrating four dual-threaded 64-bit Power Architecture e6500 cores running at up to 1.2 GHz and packaged in a 780-pin FCPBGA (25x25 mm). The device delivers eight virtual threads via e6500 hardware multithreading and is paired with dual 10 Gigabit Ethernet controllers, a 1.6 GT/s DDR3/DDR3L memory controller with ECC, and hardware-accelerated cryptography. A microprocessor (MPU) is a system-on-chip integrating one or more processor cores, memory controllers, high-speed I/O, and peripherals onto a single die, distinct from a microcontroller by providing external memory and higher throughput. The QorIQ family sits at the top of NXP's communications-processing hierarchy - MPUs feed into SoCs, then into embedded processors, then into the broader semiconductor taxonomy. The T-series is NXP's flagship communications line, and T2081 inherits architectural innovations from the flagship T4240 in a smaller, lower-power package. Key features include 8 virtual cores (4 cores x 2 threads), 1.6 GT/s 64-bit DDR3/3L memory controller with ECC, two integrated 10 Gigabit Ethernet MACs (10GE), and crypto acceleration with SEC 5.x engines. The part is pin-compatible with the quad-core T1042, enabling an upgrade path to higher throughput, and represents a value-engineering replacement for the older P4080 at lower power. Operating temperature range is -40C to +105C, with extended-reliability qualification suited for industrial and embedded environments. The e6500 core combines dual-issue out-of-order execution with hypervisor-grade virtualization, while the integrated CoreNet coherency fabric sustains simultaneous traffic across cores, memory, and networking peripherals at line rate. SEC 5.x engines accelerate symmetric ciphers, public-key operations, and true random number generation offloading the cores for protocol processing. Typical applications include enterprise and industrial networking routers and switches, network-attached storage controllers, military/aerospace secure communications platforms, industrial control gateways, and LTE/small-cell baseband processing. The T2081's balance of CPU throughput and packet-processing offload makes it well-suited for L2-L7 forwarding planes in mid-range networking equipment. When designing with the T2081NXE8MQB, allocate PCB area for the 25x25 mm FCPBGA land pattern, follow NXP's reference layout for CoreNet routing, and design a robust thermal solution: at full load the device dissipates on the order of tens of watts. Use point-to-point link training and signal-integrity simulation for 10GE SERDES lanes to guarantee margin. This page synthesizes distributor pricing (as of 2026-10-17), drop-in NXP QorIQ alternatives, and practical design notes not found in the standalone datasheet.

견적 요청 문의하기
T2081NXE8PTB - QorIQ T2 4-Core 1.533GHz PowerPC MPU | NXP
T2081NXE8PTB

T2081NXE8PTB - QorIQ T2 4-Core 1.533GHz PowerPC MPU | NXP

The NXP T2081NXE8PTB is a QorIQ T2 series 64-bit quad-core microprocessor built on PowerPC e6500 cores running at 1.533 GHz, housed in a 896-pin FCPBGA (25x25 mm) package. It integrates four e6500 cores with hardware hypervisor support, dual 10 Gigabit Ethernet controllers, eight 1 Gbps Ethernet MACs, DDR3/DDR3L memory controllers rated up to 1.87 GT/s, and high-bandwidth SerDes interfaces for networking and data-plane workloads. A microprocessor (MPU) is the central processing unit of an embedded computing system that integrates CPU cores, caches, memory controllers, and peripheral interfaces on a single die. The QorIQ T2 family sits in NXP's communications-processor hierarchy above the QorIQ T1 (T1040/T1024) and below the QorIQ T4 (T4240), targeting mid-range wired and wireless infrastructure, control-plane processing, and data-path offload applications where multi-core scalability and packet processing throughput matter. Key features include four PowerPC e6500 dual-threaded cores (up to 8 threads), 32 KB I-cache and 32 KB D-cache per core with 256 KB shared backside L2, hardware virtualization (hypervisor) support, 64-bit DDR3/3L controller with ECC at 1.87 GT/s, two 10 GbE (XFI/KR) ports, eight 1 GbE MACs, three PCIe Gen 2 controllers, two SATA 2.0 ports, two USB 2.0 controllers, and integrated security (SEC) engines with hardware-accelerated crypto. The T2081NXE8PTB is the smaller-footprint (25x25 mm FCPBGA) variant of the T2080 and is pin-compatible with the quad-core T1042, giving designers an upgrade path from T1042 designs to higher core count without board rework. The SoC is fabricated in 28 nm process technology, balancing performance per watt for thermally constrained networking line cards. Typical applications include enterprise and SMB routers, LTE/small-cell base stations, network-attached storage (NAS), industrial control gateways, and secure VPN/UTM appliances. The dual 10 GbE and eight 1 GbE ports support line-rate packet inspection and forwarding, while DDR3L at 1.87 GT/s sustains deep packet buffer and routing table lookups. When laying out the PCB, allocate a minimum 4-layer stack-up with continuous ground planes under the FCPBGA, follow NXP's layout guide for SerDes reference clock routing (impedance-controlled, length-matched differential pairs), and provide sufficient bulk decoupling near the core and memory rails to handle 1.533 GHz load transients during packet bursts. This page synthesizes distributor pricing, drop-in alternatives drawn from the NXP QorIQ T2 family, and practical design notes not collected in a single manufacturer document, helping engineers choose between T2081, T2080, T1042, and competing 64-bit MPUs more efficiently.

견적 요청 문의하기