집적 회로

하위 카테고리

📁 ADC/DAC 2,700+ 제품 📁 증폭기 IC 1,100+ 제품 📁 오디오 코덱 18 제품 📁 오디오 IC 2 제품 📁 클록 및 타이밍 480+ 제품 📁 Comparator ICs 0 제품 📁 DSP 1,000+ 제품 📁 데이터 수집 IC 2 제품 📁 디지털 포텐셔미터 4 제품 📁 디스플레이 드라이버 및 컨트롤러 1 제품 📁 FPGA & CPLD 6,800+ 제품 📁 인터페이스 IC 2,300+ 제품 📁 LED 드라이버 1 제품 📁 로직 IC 360+ 제품 📁 메모리 IC 870+ 제품 📁 마이크로컨트롤러 19,000+ 제품 📁 마이크로프로세서 4 제품 📁 모터 드라이버 1 제품 📁 기타 1 제품 📁 Sensor and Detector Interfaces 1 제품 📁 특수 IC 15 제품 📁 비디오 IC 13 제품

제품 (35,000+)

TMC2072KHC - 3-Channel 8-Bit Genlocking Video Digitizer
TMC2072KHC

TMC2072KHC - 3-Channel 8-Bit Genlocking Video Digitizer

The onsemi TMC2072KHC is a genlocking video digitizer with a 3-channel analog video input multiplexer, 8-bit video quantization, horizontal and vertical synchronization, and an on-chip PLL. It is designed for NTSC and PAL baseband composite-video acquisition and is supplied in a 100-MQFP package. The verified product data identifies the device as a genlocking video digitizer, while detailed operating limits are available in the manufacturer datasheet. A video digitizer is an interface IC that converts analog composite-video signals into digital pixel data for storage, transmission, monitoring, or image-processing systems. The TMC2072KHC combines analog input selection, clamping, gain adjustment, synchronization handling, timing generation, quantization, and digital output in one device. This integration reduces the number of external functional blocks required in professional video equipment. The 3-channel video input multiplexer supports selection among multiple composite-video sources. Analog and digital video clamp functions establish a stable reference level before sampling, while automatic gain adjustment compensates for amplitude variation. Sync detection and separation extract horizontal and vertical timing information for genlocking the digitizer to the incoming video source. According to the manufacturer datasheet description, the on-chip PLL generates a line-locked pixel clock for the internal 8-bit analog-to-digital converter and a double-speed register clock for transferring data to subsequent video-processing logic. This timing architecture is central to converting analog baseband composite NTSC or PAL video into its digital equivalent. Typical uses include broadcast video monitoring, video switching systems, frame synchronizers, production test equipment, industrial inspection, and legacy video capture. The same-package requirement and available board-level evidence must be considered before selecting a replacement. Designers should preserve the analog input, clock, PLL, and digital-output layout recommended in the datasheet and verify timing margins at the intended NTSC or PAL line rate. The verified data does not provide complete pin definitions, absolute maximum ratings, or all timing values in the supplied snippets. This page combines verified distributor information, datasheet search results, package identity, and design-oriented engineering guidance while clearly identifying parameters that require direct confirmation from the manufacturer datasheet.

견적 요청 문의하기
TMC2074-NU - Parallel CircLink Controller | Microchip Technology
TMC2074-NU

TMC2074-NU - Parallel CircLink Controller | Microchip Technology

The Microchip Technology TMC2074-NU is a dual-mode CircLink network controller with a parallel host interface, supplied in a 128-VTQFP package measuring 14 x 14 mm. The verified distributor listing identifies it as an active controller IC in the Integrated Circuits > Interface ICs category and provides the package, interface, RoHS status, stock, minimum order quantity, and seven-week lead-time information. Its central role is to connect external network-interface hardware to an embedded host through CircLink rather than requiring a conventional software protocol stack. A CircLink controller is an interface IC within the broader network-controller and data-processing hierarchy. CircLink provides a hardware-oriented communications path between a host system and supported networking devices, helping systems move control and data traffic without the cumbersome middle-layer protocol stacks and complex packet-prioritization schemes identified in the manufacturer description. The TMC2074 therefore belongs to the family of embedded communication and networking semiconductors rather than microcontrollers, analog converters, or general-purpose logic devices. The verified product record identifies the TMC2074 as a flagship CircLink product with a flexible and feature-rich design intended for high-reliability, high-performance, real-time, control-oriented networks. The -NU ordering code is shown with a parallel interface and a 128-VTQFP (14 x 14) package. Because the supplied data does not include the complete electrical timing table, the applicable processor bus details, clock values, transceiver type, or all package-pin functions, those specifications remain explicitly marked as data needed rather than inferred. Typical engineering uses for this controller include industrial control systems, embedded automation equipment, factory data links, motion-control platforms, communications modules, and other real-time networks where deterministic control-oriented communication is valuable. In these systems, the controller can serve as the dedicated interface between a host processor and network hardware, offloading communication-specific traffic handling from the main embedded CPU and helping organize the network architecture. The key design consideration is to use the manufacturer datasheet as the authority for the exact pinout, electrical limits, host-interface timing, power requirements, and supported CircLink configuration. The verified distributor information confirms the 128-VTQFP package and parallel interface, but it does not provide enough detail to specify PCB pin mapping or signal termination safely. This page combines the verified distributor and manufacturer information with explicit data gaps rather than presenting unverified engineering assumptions as specifications.

견적 요청 문의하기
TMC2081KBC - 24/16-Bit Digital Video Mixer | Fairchild
TMC2081KBC

TMC2081KBC - 24/16-Bit Digital Video Mixer | Fairchild

The Fairchild Semiconductor TMC2081KBC is a monolithic digital video mixer that proportionally combines digital video sources in GBR, YCBCR444, or YCBCR422 formats and supports 24/16-bit output. It accepts 24/16-bit GBR, YCBCR444, or YCBCR422 inputs together with 8-bit color-index sources, then provides a 24/16-bit mixed output. The device is packaged as a 160-pin PQFP. A digital video mixer is an interface IC that combines or blends multiple digital pixel streams using programmable coefficients rather than analog signal mixing. In the signal hierarchy, the TMC2081 belongs to video interface and video processing within the broader interface IC and semiconductor categories. It is useful when a system must combine graphics, camera, overlay, or chroma-key data before passing the result to downstream video circuitry. The TMC2081 supports proportional mixing through 7-bit coefficients A7-0. The supplied technical material also describes 8-bit color-index inputs, 255-step proportional mixing, 256-step mixing with the A8-0 coefficient path for a value of 100h unity gain, and an 8-bit look-up table on the chroma channel. These features allow designers to adjust source contributions and apply channel-specific processing rather than relying on a fixed video combiner. Operation is digital, which avoids the noise, gain drift, and channel-matching problems commonly associated with analog video mixers. The implementation supports color spaces with 444 and 422 chroma formats and a 24/16-bit output, making the device relevant to professional video, broadcast, monitoring, graphics, and industrial imaging systems that require deterministic pixel-level blending. The main design consideration is digital interface timing and format compatibility. All sources must be mapped to supported resolutions, color spaces, and coefficient formats before the mixer is enabled. Because the available verified data does not state supply voltage, clock frequency, operating temperature, or the full pin map, those values must be confirmed in the manufacturer datasheet and current production documentation before schematic capture. This page combines the verified distributor and manufacturer-datasheet references with application guidance and sourcing context. It also highlights where pin-level, timing, and lifecycle information still requires confirmation, helping engineers distinguish documented capabilities from assumptions.

견적 요청 문의하기
TMC2084-HT - 3.3V 48-TQFP CircLink Controller | Microchip
TMC2084-HT

TMC2084-HT - 3.3V 48-TQFP CircLink Controller | Microchip

The Microchip Technology TMC2084-HT is a 3.3 V standalone-mode CircLink network controller and intelligent remote I/O controller packaged in a 48-pin TQFP. It uses an enhanced token-passing protocol, supports CAN-linked distributed I/O, and is designed to work with a host controller such as TMC2074 or TMC2072. The verified source data identifies a 5 Mbps CAN connection, 3.3 V operation, a 48-TQFP 7 mm × 7 mm package, and a parallel interface. A CircLink controller is a semiconductor interface device that extends controller-area network communication to remote I/O nodes. In a token-passing network, one node holds the token and communicates in a defined order, reducing simultaneous transmission contention. The TMC2084 therefore sits between a host node and distributed I/O devices, helping organize network traffic while exposing local control and status information to the host. The TMC2084-HT operates from a 3.3 V low-power CMOS supply and provides 5 V tolerant I/O, allowing it to interface with external circuitry whose logic levels exceed the core supply. The enhanced token-passing protocol supports up to 15 nodes per network according to the verified data. A token-retry mechanism and consecutive node-ID assignment help the controller recover after communication interruptions and organize network participants. The controller supports 64-byte or 128-byte packets, providing a choice between communication efficiency and payload granularity. Its parallel interface makes it suitable for systems where the controller is connected to a host processor or dedicated interface logic. The 48-TQFP package is a surface-mount, fine-pitch package suitable for industrial and embedded control equipment. Typical applications include industrial automation equipment, factory monitoring systems, distributed data-acquisition modules, remote I/O racks, building-control equipment, and embedded test systems. In these systems, the TMC2084 can organize token-based communication between a host controller and remote I/O nodes, reducing the need for a dedicated processor at every node. Designers should verify the exact pin assignments, clocking, reset, interface timing, and electrical limits against the Microchip TMC2084 manufacturer datasheet before layout. Because the available search results provide only a subset of the complete electrical and timing data, values not explicitly present in the verified sources are marked for data completion rather than inferred.

견적 요청 문의하기
TMC2084-HT-E2 CircLink Controller | Microchip | Remote I/O
TMC2084-HT-E2

TMC2084-HT-E2 CircLink Controller | Microchip | Remote I/O

The Microchip TMC2084-HT-E2 is a standalone-mode CircLink controller functioning as an intelligent remote I/O controller in a 48-pin LQFP package. The verified source identifies a 40 MHz device with CMOS interfaces, operation from 3 V to 3.6 V, and compatibility with an enhanced token-passing network controlled by a TMC2074 or TMC2072 host node. Its primary role is distributed I/O expansion rather than general-purpose computation or standalone sensor conditioning. A CircLink controller is a dedicated network interface and remote I/O control device. In this architecture, the TMC2084 attaches external I/O nodes to a token-passing serial network, allowing a host controller to supervise distributed digital inputs and outputs. This hierarchy places the device among interface controllers, serial I/O controllers, semiconductors, and CircLink network components. The verified comparison data identifies the TMC2084-HT as an active Microchip device in a 48-pin rectangular low-profile QFP package. The listed electrical data includes a 40 MHz clock, 3 V minimum and 3.6 V maximum supply limits, CMOS technology, a 0.5 mm pitch, and 7 mm package width. These characteristics make it suitable for established CircLink equipment requiring the documented package and supply configuration. The controller uses enhanced token passing rather than a generic host peripheral protocol. In standalone mode, network nodes are controlled by a TMC2074 or TMC2072 host through the CircLink network. Because traffic depends on network behavior, firmware, timing, and system topology, designers should follow the manufacturer datasheet for electrical limits, protocol operation, and application implementation. Typical uses include industrial remote I/O, machine-control distributed interfaces, test equipment, building-control systems, and embedded control networks. The part is most appropriate when an existing CircLink host architecture can communicate with it and the PCB footprint matches the documented 48-pin package. A key procurement consideration is lifecycle and sourcing. Search results describe the family as active and show multiple distributor listings, but package-qualified alternatives were not established by the supplied cross-reference evidence. Engineers should therefore treat TMC2084-HT-E2 as a system-specific procurement choice rather than assume an interchangeable controller. This page consolidates verified manufacturer information, distributor availability evidence, technical comparison data, and procurement guidance. It distinguishes published facts from unavailable electrical details and avoids presenting unreferenced replacements as drop-in devices.

견적 요청 문의하기
TMC22053KHC - Multistandard Video Decoder | onsemi
TMC22053KHC

TMC22053KHC - Multistandard Video Decoder | onsemi

The onsemi TMC22053KHC is a multistandard digital video decoder in a 100-pin BQFP package. It accepts line-locked or subcarrier-locked composite, YC, or D1 digital video and produces digital component signals in multiple output formats. The device is designed for professional broadcast-video equipment that requires decoding and digital component processing within one integrated circuit. Its stated analog supply range is 4.75 V to 5.25 V, while the verified digital supply information is incomplete. A digital video decoder is an interface IC that converts legacy analog video signals into digitized component-video data. Within the product hierarchy, the TMC22053KHC is a video decoder, interface IC, signal-processing semiconductor, and integrated circuit. Decoder ICs sit between incoming video sources and downstream buffers, scalers, processors, transmitters, or digital recording equipment. They are commonly used in studio monitors, broadcast equipment, video switching systems, and professional capture products rather than ordinary consumer televisions. The TMC22x5y decoder family is presented as a broadcast-quality video-processing solution combining multistandard input acceptance with digital component generation. Supported input modes include composite, YC, and D1, and the outputs are available in several digital-component formats. This combination can reduce the number of separate conversion stages required in a professional video path. The exact supported output list, timing limits, resolution modes, and channel mapping require confirmation against the manufacturer datasheet. The KHC suffix identifies the supplied 100-BQFP package in the verified distributor records, and those records describe the component as active and intended for bulk packaging. The package provides 100 external leads for power, analog video, digital video, control, memory-interface, and synchronization functions. Exact pin assignments are not exposed in the supplied verified data, so a complete pinout cannot be reproduced without the manufacturer pinout diagram. TMC22053KHC fits studio television equipment, broadcast monitoring, professional video conversion, digital video routing, and embedded legacy-video acquisition systems. The principal design benefit is integration: accepting several input standards and producing digital component signals can simplify signal-chain partitioning when the downstream processor expects component video. System designers must still validate timing, sync polarity, colorimetry, blanking behavior, and interface voltage compatibility. The key engineering consideration is supply and interface planning. The analog core is specified for 4.75 V to 5.25 V, so layout must provide clean, stable rails and adequate decoupling. Digital-logic connections require confirmation of supply limits and voltage thresholds. PCB signal integrity also depends on keeping analog inputs away from switching-node and high-current return paths, while the large 100-lead BQFP requires careful fanout, ground-plane continuity, and via placement. This page consolidates the verified onsemi-family product description, distributor pricing, package information, comparison guidance, and practical integration notes. It distinguishes verified facts from parameters that still require confirmation from the datasheet, helping engineers source the part while avoiding unsupported assumptions about pinout, timing, compliance, or replacement behavior.

견적 요청 문의하기
TMC22090R0C - RGB to NTSC/PAL Video Encoder | Fairchild
TMC22090R0C

TMC22090R0C - RGB to NTSC/PAL Video Encoder | Fairchild

The Fairchild Semiconductor TMC22090R0C is an RGB-to-NTSC/PAL color-signal video encoder integrated circuit packaged in an 84-pin PLCC. The verified distributor record identifies the device as a video encoder IC that converts RGB signals into composite NTSC or PAL video, making it suitable for legacy analog-video equipment, industrial imaging systems, video test equipment, and signal-generation applications. Its 29.31 mm by 29.31 mm PLCC package is supplied in the R0C ordering configuration, and the listed distributor price is $13.8014 as of 2026-10-28. A video encoder is an interface IC that translates RGB color information into a composite analog video waveform accepted by displays, recorders, monitors, and broadcast-related equipment. The TMC22090R0C belongs to the broader integrated-circuit hierarchy of interface ICs, video signal-processing ICs, color encoders, and signal-conversion semiconductors. NTSC and PAL are legacy analog television color systems, so this component is primarily relevant to equipment that still supports composite-video interfaces rather than modern digital HDMI, DisplayPort, or camera-sensor interfaces. The verified product classification establishes RGB input, NTSC/PAL output, and the 84-PLCC package. Specific operating voltages, current consumption, clock requirements, synchronization behavior, input levels, output impedance, resolution limits, temperature range, and electrical performance ratings were not present in the supplied records. Those parameters must therefore be confirmed from the manufacturer datasheet before schematic capture, signal-integrity simulation, production release, or replacement qualification. The 84-pin PLCC package exposes substantially more external connections than a compact mixed-signal IC, suggesting a feature-rich legacy encoder implementation with multiple data, synchronization, control, power, and ground connections. Because the exact pin map and exposed-pad arrangement are unavailable in the verified data, engineers should not infer individual pin functions from the package count. The electrical connection must follow the official TMC22090 datasheet and its recommended application circuit rather than a generic PLCC footprint. Typical application areas include RGB-to-composite-video adapters, industrial monitor and control-panel interfaces, broadcast-equipment test fixtures, educational video laboratories, and repair or modernization systems that must preserve NTSC or PAL output. The device is also relevant where an existing system accepts analog composite video but produces RGB internally. Its usefulness depends on matching the source RGB timing, sync polarity, reference level, and target television standard to the encoder's documented operating conditions. A critical design consideration is that a correct package and function description does not guarantee an acceptable composite-video output. Input levels, blanking, synchronization, chrominance alignment, and output termination must be verified against the manufacturer specifications. PCB layout should follow the datasheet's routing and grounding guidance, and unused inputs should be handled according to the documented application circuit rather than by assumption. This page consolidates the verified distributor listing, current price reference, package information, product classification, sourcing links, and drop-in-replacement status for the TMC22090R0C. It also distinguishes documented facts from parameters that still require datasheet confirmation, helping engineers avoid unsupported assumptions when sourcing or designing around this legacy RGB-to-NTSC/PAL video encoder.

견적 요청 문의하기
TMC22091KHC - RGB to NTSC/PAL Video Encoder | Fairchild
TMC22091KHC

TMC22091KHC - RGB to NTSC/PAL Video Encoder | Fairchild

The Fairchild Semiconductor TMC22091KHC is an all-digital RGB-to-NTSC/PAL video encoder IC packaged in a 100-lead metric quad flat package measuring 20 mm by 14 mm. It accepts digital RGB computer-image or graphics data in 24-bit and 15-bit GBR/RGB 444 formats, as well as color-indexed data, and converts those inputs into a standard analog baseband television signal with a modulated color subcarrier. The device also accepts a CCIR-601 signal and provides a microprocessor interface, frame-buffer interface, genlock interface, and JTAG test interface. A digital video encoder is a semiconductor that converts digital pixel data into a conventional analog video waveform. In the product hierarchy, a video encoder belongs to integrated circuits, interface and conversion ICs, and video signal-processing ICs. Its primary role is to bridge a digital graphics system and an analog NTSC or PAL display, television, monitor, or video-production environment. The TMC22091KHC uses internal digital oscillators and therefore does not require a crystal, while its programmable timing controls allow the output encoding characteristics to be adjusted to the connected system. Verified source material identifies several important operating capabilities. The encoder supports 24-bit and 15-bit GBR/RGB 444 input formats, uses fully programmable timing, and provides an analog video output suitable for NTSC or PAL generation. Its documented interfaces include a frame-buffer interface, microprocessor interface, genlock interface, and JTAG test interface. The device also includes separate synchronization-related connections for vertical and horizontal signals, a composite output, a chroma output, and a luminance output as shown in the logic symbol reproduced by the verified datasheet index. Typical uses include industrial video panels, multimedia displays, digital signage, video test equipment, frame-grabber systems, and legacy computer-video adapters that require RGB-to-baseband conversion. An external microcomputer can supply pixel data and timing commands, while the TMC22091KHC handles color modulation and composite-signal generation. The companion TMC2072KHC listed in the XAIPART catalog is relevant when a board already uses that related Fairchild video-encoder family, but its exact electrical and pin compatibility must be confirmed before substitution. The primary design consideration is interface verification. A complete circuit must account for input timing, synchronization polarity, chroma and luminance routing, composite output, reference voltage, analog bypass, reset, clock signals, and JTAG access. Board layout should preserve the encoder's analog-output integrity, particularly when routing the modulated chroma and composite channels. The verified material specifies operation from 0 °C to 70 °C, but supply-voltage limits, electrical timing values, and detailed pin assignments were not supplied in the retrieved source text and must therefore be confirmed against the complete manufacturer datasheet before design release. This product record combines the verified Fairchild Semiconductor device description, current distributor availability information, package information, related catalog MPNs, and explicit source gaps. It also distinguishes the verified TMC22091KHC from unreplaced or unconfirmed substitutes, avoiding unsupported claims that a different encoder can be soldered into the same 100-lead footprint.

견적 요청 문의하기
TMC22153AKHC - 10-Bit Multistandard Video Decoder | onsemi
TMC22153AKHC

TMC22153AKHC - 10-Bit Multistandard Video Decoder | onsemi

The onsemi TMC22153AKHC is a multistandard digital video decoder and three-line adaptive comb decoder with 8-bit and 10-bit processing capability, supplied in a 100-pin MQFP package. The verified product information identifies the device as part of the TMC22153 three-line adaptive comb decoder family, where related versions support three-line, two-line, and band-split decoding architectures. A digital video decoder is an interface IC that reconstructs digital composite-video signals into component video data for subsequent processing. The TMC22153AKHC belongs to the broader video decoder and analog-to-digital signal-conversion hierarchy, combining multistandard input handling, adaptive comb filtering, and internal digital line stores. These features place it between an analog composite-video source and downstream display or video-processing circuitry. The principal identified advantages are adaptive comb-based decoding, support for multiple pin-compatible family configurations, 8-bit and 10-bit processing, and internal digital line stores. The internal line stores reduce the need for external memory when implementing the decoder's line-adaptive filtering functions. Multiple family versions also allow designers to evaluate different comb-filter architectures while retaining a common package-oriented design approach. Technically, the TMC22153AKHC is identified as the 10-bit member of its three-line decoder family in the verified search results. The available excerpts do not provide the complete input-format list, composite-video synchronization requirements, clock limits, supply voltage, output interface, or channel timing specifications. Those parameters must therefore be checked in the manufacturer datasheet before signal-integrity, synchronization, or PCB sign-off. Typical potential uses include legacy multistandard composite-video decoding, industrial video inspection, broadcast and studio signal conditioning, professional video equipment, and embedded systems that must convert composite video into a digital processing stream. The part's internal digital line stores and adaptive comb decoding make it relevant where comb filtering must be integrated without an external line-memory implementation. The primary design consideration is that a decoder replacement must match the exact family variant, package, pinout, clocking, voltage, and output timing. Related TMC22150, TMC22151, and TMC22152 devices may share family characteristics, but the verified excerpts do not establish every pin and parameter as identical. Original schematic capture, datasheet comparison, and hardware validation remain mandatory before substitution. This page consolidates the verified distributor, archive-datasheet, and cross-reference findings with explicitly marked specification gaps. It also distinguishes potentially related family devices from confirmed drop-in replacements, helping engineers identify sourcing options without presenting unverified compatibility as an established fact.

견적 요청 문의하기
TMC22191R0C Digital Video Encoder | onsemi | Display Systems
TMC22191R0C

TMC22191R0C Digital Video Encoder | onsemi | Display Systems

The onsemi TMC22191R0C is an all-digital video encoder and layering engine that converts digital RGB or color-indexed graphics into programmable video timing and output signals. It supports 24-bit and 15-bit GBR/RGB 444 input formats, provides 30 color-indexed overlay colors for the TMC22191, and uses internal digital oscillators that eliminate the need for external crystals. Its programmable timing architecture makes it suitable for display-controller, graphics-processing, digital-video, and embedded visualization systems. A digital video encoder is an interface IC in the broader display and video-processing hierarchy. It accepts already-rendered pixel data, applies programmable timing and color or overlay functions, and produces output signals for downstream display or transmission circuitry. Unlike an analog encoder, the TMC22191R0C performs its processing entirely in the digital domain, helping preserve pixel data until the final output stage and reducing reliance on external synchronization components. Key features include support for 24-bit and 15-bit GBR/RGB 444 graphics inputs, 30 color-indexed overlay colors, fully programmable timing, and internal digital oscillators. The 15-bit input mode reduces interface width when full 24-bit color depth is unnecessary, while the 24-bit mode supports a wider color representation. The internal oscillators eliminate external crystal hardware when the application's timing can be generated digitally. The device is designed for systems that already supply synchronous digital graphics and require flexible video timing or layered overlays. Its all-digital architecture distinguishes it from solutions that perform color processing or regeneration through analog video stages. Exact electrical limits, supported output standards, operating temperature range, and package dimensions were not supplied in the verified source excerpts and must be confirmed from the full manufacturer datasheet before design release. Typical applications include industrial HMI panels, digital signage controllers, medical imaging interfaces, professional video equipment, instrumentation, and other embedded display systems. The 30-overlay capability is particularly useful when the source graphics must remain visible beneath cursor, menu, warning, or diagnostic information. A 15-bit interface can also simplify routing in cost-sensitive systems where 24-bit color depth is not required. Designers should allocate the TMC22191R0C according to its complete pinout and recommended interface schematic, including power, ground, pixel-data, timing, and output connections. Because the verified excerpts do not establish the exact package, exposed-pad requirements, pin numbering, or output electrical characteristics, those details should be checked directly in the manufacturer datasheet rather than inferred from distributor category labels. This page combines verified distributor availability, the documented input-format and overlay features, sourcing guidance, and explicit data gaps. It is intended to help engineers identify whether the TMC22191R0C matches an existing video-encoding design while separating confirmed facts from parameters that still require datasheet verification.

견적 요청 문의하기
TMC2242AKTC - 60MHz Digital Half-Band Filter | onsemi
TMC2242AKTC

TMC2242AKTC - 60MHz Digital Half-Band Filter | onsemi

onsemi TMC2242AKTC is a digital half-band interpolating and decimating filter IC with 12-bit input, 16-bit output, operation up to 60 MHz, and a 44-MQFP (10 x 10 mm) package. It supports selectable interpolation gain, 2:1 decimation, 1:2 interpolation, and equal-rate filtering modes, making it suitable for digital video and signal-processing systems that require programmable filtering without a configurable FPGA logic core. A digital filter IC is a specialized signal-processing semiconductor that performs finite impulse response filtering directly on sampled digital data. The TMC2242AKTC belongs to the broader digital signal processing hierarchy: digital filter -> FIR/half-band filter -> video filter IC -> signal-processing semiconductor. Its half-band architecture reduces computationally intensive filtering requirements in interpolation and decimation paths while maintaining predictable passband and stopband behavior. Verified distributor information identifies the device as a half-band filter with a selectable operating speed of 30, 40, or 60 MHz. The filter supports user-selectable interpolation gain and selectable 2:1 decimation, 1:2 interpolation, and equal-rate operating modes. Search results also identify a 12-bit input resolution and 16-bit output resolution, allowing the filter to operate between compact digital sources and higher-resolution downstream converters or processors. The TMC2242A and TMC2242B families are described as pin-compatible with TMC2242, but the supplied verified data does not establish a complete pin table, voltage limits, clock timing, power consumption, operating temperature, or package-equivalent ordering codes. These values must therefore be confirmed in the manufacturer datasheet before a new circuit is released. The AKTC package is identified by authorized distributor listings as a 44-MQFP surface-mount package measuring 10 x 10 mm. Typical uses include digital video interpolation and decimation, multimedia processing chains, communication-system sample-rate conversion, and equipment requiring a dedicated digital half-band filter. In a video path, the device can reduce the filtering burden placed on a DSP or FPGA. Selection should account for clock rate, data width, filter mode, power-supply requirements, output timing, and the exact 44-MQFP footprint documented by the manufacturer. When prototyping, verify clock polarity, synchronous interface timing, data alignment, and control-pin states against the current manufacturer documentation. Treat distributor descriptions as catalog evidence rather than a substitute for the complete electrical specification. This page combines verified catalog data, sourcing information, application guidance, and clearly identified data gaps to support initial design review without presenting unsupported electrical claims.

견적 요청 문의하기
TMC2242AR2C1 - 40MHz Half-Band Digital Filter | onsemi
TMC2242AR2C1

TMC2242AR2C1 - 40MHz Half-Band Digital Filter | onsemi

The onsemi TMC2242AR2C1 is a 44-pin PLCC digital half-band interpolation and decimation filter designed for 40 MHz video signal processing. The device is identified in distributor listings as a half-band-order filter with 12-bit/16-bit signal handling, making it suitable for digital video interpolation, decimation, and clock-rate-conversion stages. It is supplied in a 44-PLCC package measuring 16.59 mm by 16.59 mm. A digital half-band filter is a specialized finite impulse response filter whose frequency response includes a broad passband, a narrow transition region, and a stopband centered near one-half of the input sampling rate. By attenuating the center of the digital spectrum, a half-band filter reduces alias or image components with a relatively low computational and implementation burden. TMC2242AR2C1 places that filtering function in a dedicated integrated circuit, simplifying designs that previously required several separate filter stages. The key verified characteristics of this device are its 40 MHz operating class, half-band filter order, digital interpolation and decimation capability, and 12B/16B data resolution. These characteristics position it for professional and broadcast video systems where sampled data must be filtered before or after rate conversion. Distributor records also associate the part with onsemi, MaxLinear, and historical Fairchild Semiconductor and Exar cataloging, reflecting the company's ownership and product-line history. Because the TMC2242AR2C1 uses a 44-pin PLCC package rather than a modern leadless package, it is primarily relevant to legacy video infrastructure, retrofit programs, test equipment, and systems already designed around this footprint. Legacy PLCC devices also require attention to assembly method, thermal cycling, and availability before committing to a new production design. The critical design consideration is to preserve the device's required clock relationship, control levels, and supported data format. A half-band filter only produces the intended spectral benefit when input and output clocks are configured correctly and data timing meets the manufacturer's requirements. Designers should also verify whether the filter is configured for interpolation, decimation, or both through its control and clock connections. This page consolidates the verified distributor identity, package information, filter class, and sourcing records for the TMC2242AR2C1, and adds application-oriented guidance that is not normally presented in a distributor catalog entry. Because the verified data does not publish a complete pin map, detailed electrical limits, or confirmed lifecycle notice, those fields are explicitly marked rather than inferred.

견적 요청 문의하기
TMC2246AH5C - 11x10-Bit 60MHz Digital Filter | onsemi
TMC2246AH5C

TMC2246AH5C - 11x10-Bit 60MHz Digital Filter | onsemi

The onsemi TMC2246AH5C is an 11 x 10-bit digital image-filter processor operating at a 60 MHz computation rate in a 120-pin PGA package. It supports 60 MHz data and coefficient input, four 10-bit multipliers, a 25-bit accumulator, and separate fractional and integer two's-complement data formats. A digital filter is a signal-processing integrated circuit that performs arithmetic operations on sampled data rather than relying solely on passive or analog components. The TMC2246AH5C belongs to the broader digital signal processing IC hierarchy, where multiply-accumulate operations implement finite impulse response filtering and related image-processing functions. Its stated application context is industrial control, precise signal processing, and electronic noise-reduction systems. The device provides a 60 MHz computation rate alongside 60 MHz data and coefficient input paths. Four individual 10-bit multipliers support parallel coefficient processing, while the 25-bit accumulator provides additional internal range for intermediate arithmetic. Input and output data latches include user-configurable behavior, enabling synchronization between the filter and surrounding digital circuitry. The supported data formats include fractional and integer two's-complement representations. Technically, the TMC2246AH5C is positioned as a dedicated image-filter processor rather than a general-purpose microcontroller or FPGA. Its four multipliers and 25-bit accumulator form the arithmetic core used to combine input samples and filter coefficients. The 11 x 10-bit architecture and 60 MHz operating rate target real-time image filtering where processing throughput, fixed-point data interpretation, and deterministic parallel arithmetic are important. The listed application areas include industrial-control signal conditioning, image filtering, noise reduction, and other electronic systems requiring precise fixed-point processing. Such uses benefit from dedicated multiplier-accumulate hardware because it reduces the processing burden associated with implementing repeated coefficient calculations in general-purpose control logic. Integration into a larger system still requires correct clocking, data-latch configuration, and compatible fixed-point data formats. Designers should verify the complete manufacturer datasheet before layout because the supplied data identifies a 120-pin PGA package but does not expose the pinout, pin functions, supply voltages, clocking limits, or electrical characteristics. The package should therefore be treated as a 120-pin PGA with no schematic-level pin substitutions assumed. PCB planning should preserve the device's high-speed digital interface and provide a controlled return path for clock and data signals. This product page consolidates the verified 11 x 10-bit architecture, 60 MHz processing capability, multiplier count, accumulator width, supported data formats, package information, and source links. It also distinguishes documented specifications from engineering details that still require confirmation from the manufacturer datasheet or a qualified distributor.

견적 요청 문의하기
TMC2250AH5C - 12x10-Bit 50MHz Matrix Multiplier | onsemi
TMC2250AH5C

TMC2250AH5C - 12x10-Bit 50MHz Matrix Multiplier | onsemi

onsemi TMC2250AH5C is a 12 x 10-bit matrix multiplier operating at up to 50 MHz in a 120-pin PGA package. The device provides a 20 ns pipelined processing interval and supports four user-selectable filtering and transformation functions: triple dot product, matrix multiply, cascadeable 9-tap systolic FIR filtering, and cascadeable two- or three-pixel image convolution. A matrix multiplier is a digital signal-processing semiconductor that multiplies two numerical operands and accumulates the result. It belongs to the arithmetic processing hierarchy of DSP ICs, where it supports real-time matrix operations, correlation, filtering, and image processing. The TMC2250AH5C combines parallel operand inputs, selectable internal functions, and pipelined execution in a single through-hole PGA package. The supplied source data identifies the matrix dimensions as 12 x 10 bits and the maximum operating frequency as 50 MHz. Its selectable operating modes make it suitable for dot-product engines, FIR filter cascades, and image-convolution pipelines. A 50 MHz pipelined implementation allows a new input set to be accepted every 20 ns, subject to the clock, data, control, and output timing requirements specified by the manufacturer datasheet. The TMC2250AH5C is identified as a DSP peripheral or matrix-multiplier IC rather than a general-purpose microprocessor. It is particularly relevant to signal-chain designs that perform fixed-format arithmetic close to an ADC, video interface, or image-processing pipeline. Its four transformation modes can simplify implementation of reusable convolution and filtering hardware instead of requiring every operation to be mapped into a software processor. Typical uses include digital filtering, image convolutions, matrix transformations, and dot-product acceleration in industrial, instrumentation, communications, and image-processing equipment. Because the package is a 120-pin PGA with through-hole pins, board layout should provide adequate connector spacing, clean routing between the device and surrounding digital logic, and decoupling that minimizes power-distribution disturbance around the high-speed multiplier. System designers should confirm the exact clock, input-output timing, control-signal state, pin assignment, and output-word interpretation in the manufacturer datasheet before layout. The verified search results did not expose a complete pin list, so this page does not infer individual pin names. They also did not provide power-supply limits, temperature range, or detailed timing tables. This page combines verified manufacturer and distributor search data with transparent engineering guidance, including sourced pricing, supported operating modes, application context, and clearly identified missing specifications. It distinguishes confirmed facts from parameters that require validation in the original manufacturer documentation before schematic release or PCB layout signoff.

견적 요청 문의하기
TMC2272AH5C3 - 36-Bit 50 MHz Colorspace Converter | onsemi
TMC2272AH5C3

TMC2272AH5C3 - 36-Bit 50 MHz Colorspace Converter | onsemi

onsemi TMC2272AH5C3 is a digital colorspace converter with 36-bit color processing and 50 MHz throughput, provided in a 120-PPGA package measuring 34.16 mm by 34.16 mm. The converter processes three simultaneous 12-bit input and output channels, supports twos-complement input and output data, and provides overflow headroom in lower-resolution, user-defined coefficient modes. A digital colorspace converter is a specialized video-processing semiconductor that transforms pixel data from one color representation into another through programmable or fixed conversion coefficients. Within the broader video-processing IC category, its role sits between high-speed parallel input and output interfaces and downstream display, graphics, or video-processing systems. The TMC2272AH5C3 targets precision color conversion where multiple 12-bit channels must be processed simultaneously at high throughput. The principal operating characteristics include 36-bit color depth, three concurrent 12-bit channels, a 50 MHz processing rate, and a 20 ns pipelined throughput. The device can represent up to 64 Giga (2^36) colors. TTL-compatible inputs simplify interfacing with compatible digital video logic, while the simultaneous input and output architecture reduces the number of separate conversions required in multichannel graphics systems. Operationally, the converter accepts twos-complement digital data and applies user-defined coefficients for lower-resolution operating modes. This coefficient flexibility supports systems that need controlled color mapping rather than a fixed conversion matrix. The 20 ns pipeline is a timing-oriented feature: downstream logic can operate synchronously with a 50 MHz processing clock, subject to the timing constraints and setup requirements specified in the manufacturer datasheet. Typical uses include high-resolution graphics pipelines, broadcast video conversion, professional display equipment, medical imaging interfaces, industrial visualization systems, and multichannel color-processing equipment. Its three simultaneous channels are particularly relevant to RGB systems, where red, green, and blue data can be converted together rather than through separate serial or multiplexed processing stages. Designers should preserve the converter's parallel data timing, provide suitable input setup and output hold conditions, and account for the large 34.16 mm by 34.16 mm legacy PPGA footprint. PCB availability and replacement sourcing should be checked before new design commitments because the verified cross-reference search did not identify a confirmed pin-to-pin drop-in replacement. This product record consolidates the verified manufacturer-oriented description, distributor pricing and stock information, package details, known conversion features, and sourcing limitations. It also distinguishes confirmed characteristics from unverified parameters so procurement and engineering teams can evaluate this legacy video converter without relying on guessed specifications.

견적 요청 문의하기
TMC2272AKEC3 - 36-Bit 50 MHz Color Converter | onsemi
TMC2272AKEC3

TMC2272AKEC3 - 36-Bit 50 MHz Color Converter | onsemi

The onsemi TMC2272AKEC3 is a 36-bit digital color-space converter operating at 50 MHz, with three simultaneous 12-bit input and output channels, in a 120-MQFP package measuring 28 x 28 mm. It supports a 4.75 V to 5.25 V supply range and supports twos-complement inputs and outputs, making it suitable for digital video color-processing systems that require high-throughput parallel color transformation. A digital color-space converter is a signal-processing IC that converts color values between coordinate systems such as RGB, YUV, YCbCr, or related representations. Within the broader semiconductor hierarchy, it is a digital signal processor and specialized logic IC used for video imaging, graphics, display processing, broadcast equipment, and other systems that must transform parallel pixel data at high speed. The TMC2272AKEC3 operates at 50 MHz, corresponding to a 20 ns pipelined throughput interval according to the available technical summary. The primary feature set includes 36-bit color processing through three simultaneous 12-bit input and output channels. The converter can therefore handle three color components during each pipeline cycle rather than processing the components sequentially. Its two's-complement numerical format supports signed digital color representations, while overflow headroom in lower-resolution, user-defined coefficient modes provides additional implementation flexibility. The TMC2272AKEC3 accepts TTL-compatible inputs and operates from a single 4.75 V to 5.25 V supply. The 120-MQFP surface-mount package provides 120 gull-wing terminals and a 28 x 28 mm body size. The verified source data identifies the package as 120-BQFP, 120-MQFP, square, and commercial temperature grade, although an exact terminal-by-terminal public pinout was not included in the supplied materials. Typical applications include video color correction, RGB-to-YUV or YUV-to-RGB conversion, display calibration pipelines, graphics preprocessing, broadcast video equipment, and industrial imaging systems with parallel pixel interfaces. The three simultaneous channels are especially useful where color components must be converted in parallel with minimal throughput penalty. Systems still need to establish the required coefficient values and verify the converter's numerical format at the system interface. The main design consideration is confirming that the PCB footprint and signal timing match the target 120-terminal package. Designers should also preserve adequate logic-level compatibility and account for the converter's signed input and output convention. Because the available source material does not provide a verified pin-by-pin diagram, board-level replacement should not be based on visual package matching alone. This page consolidates the verified 50 MHz throughput, 36-bit processing capability, supply range, package information, and available price into an engineering-focused reference. It also separates verified specifications from unavailable pin-level and lifecycle data, helping procurement and design teams evaluate the TMC2272AKEC3 without treating unsupported assumptions as manufacturer specifications.

견적 요청 문의하기
TMC2302AH5C1 - Image Manipulation Sequencer | Fairchild Semiconductor
TMC2302AH5C1

TMC2302AH5C1 - Image Manipulation Sequencer | Fairchild Semiconductor

The Fairchild Semiconductor TMC2302AH5C1 is an image manipulation sequencer designed for high-performance image filtering, remapping, rotation, warping, panning, scaling, and two- or three-dimensional address generation. The device is identified in distributor listings as a 121-pin PPGA package measuring 34.16 mm by 34.16 mm. It supports asynchronous loading of control parameters and rapid pixel processing at 25 ns per pixel, making it suitable for specialized image-processing systems, raster engines, inspection equipment, and high-speed video-processing architectures. The TMC2302A architecture can control filtering or remapping of two- and three-dimensional images by resampling them from one Cartesian coordinate system into another. General third-order polynomial transformations in two dimensions are provided on-chip, while three-dimensional image addressing expands the device beyond simple two-dimensional raster remapping. The H5C1 ordering suffix is associated with the 121-lead PPGA package in the verified distributor data; additional electrical, timing, environmental, and ordering details are not included in the supplied source data and are therefore not inferred here. As an application-specific address generator and image manipulator, the TMC2302AH5C1 is not a conventional microprocessor, memory device, or general-purpose DSP. Instead, it sits within the image-processing pipeline and supplies calculated addresses and transform parameters for downstream pixel memory. Its 25 ns per pixel capability is the principal verified performance figure and should be compared against the system clock, memory bandwidth, pixel format, and transformation complexity during design planning. The component was originally offered by Fairchild Semiconductor; some current distributor records associate the same MPN with onsemi. Buyers should confirm lifecycle status, traceability, and documentation revision with the authorized seller before placing an order.

견적 요청 문의하기
TMC2330AL5F1 - 16x16 40 MOPS Coordinate Transformer | Fairchild
TMC2330AL5F1

TMC2330AL5F1 - 16x16 40 MOPS Coordinate Transformer | Fairchild

The Fairchild Semiconductor TMC2330AL5F1 is a coordinate-transformer video-processing IC built around a 16 x 16-bit transform and rated for 40 million operations per second. The device is supplied in a PLCC-52 package and is associated with video signal transformation rather than general-purpose microprocessor or interface functions. Available distributor data identifies the TMC2330A family as a coordinate transformer operating at 40 MOPS. A coordinate transformer is a specialized digital signal-processing semiconductor that reorganizes two-dimensional sampled data according to a fixed transformation. It sits within the broader digital signal processing and video-processing IC hierarchy. Unlike a general-purpose CPU, this component is intended to execute a defined transformation in parallel, which can reduce the number of operations that surrounding processors must perform when handling spatial or frequency-domain image data. The principal documented characteristics of the TMC2330A family are its 16 x 16-bit coordinate-transform architecture, 40 MOPS processing rate, and 52-lead PLCC-style package. The exact ordering-code suffix is the main way distributors identify individual package, temperature, and qualification configurations. Because the supplied sources describe TMC2330AL5F1 at the family level and do not expose the complete timing, clock, supply-voltage, and environmental tables, those electrical details must be checked against the manufacturer datasheet before a new design is released. TMC2330AL5F1 was originally associated with Fairchild Semiconductor, whose semiconductor operations later became part of onsemi. The TMC2330A family is listed in distributor databases as a video-processing or unclassified integrated circuit. This classification reflects its specialized coordinate-transformation function and the age of the product line rather than a general inability to operate with contemporary digital video systems. Typical design uses include coordinate conversion, image-processing pipelines, video timing and geometry support, industrial imaging, and embedded systems that retain a legacy Fairchild or onsemi video IC. The 40 MOPS throughput makes the device most relevant when parallel coordinate transformation can simplify a surrounding processor architecture. Modern systems may instead implement equivalent mathematics in an FPGA, DSP, or SoC, so lifecycle availability and software support should be assessed alongside raw processing throughput. A critical design consideration is that an obsolete or mature catalog designation does not by itself guarantee a modern-production part. Buyers should request traceability, date-code, condition, and lifecycle documentation from the authorized distributor. The published unit price is a quoted marketplace figure rather than a volume-price schedule, and engineers should also confirm package pinout, clock requirements, signal timing, and supply rails before treating the TMC2330AL5F1 as a drop-in replacement for any existing board.

견적 요청 문의하기
TMC2340AH5C1 - 16-Bit DDS Synthesizer | onsemi | Signal Generation
TMC2340AH5C1

TMC2340AH5C1 - 16-Bit DDS Synthesizer | onsemi | Signal Generation

The onsemi TMC2340AH5C1 is a dual 16-bit direct digital synthesis IC with a 50 Msps maximum sampling rate, 32-bit phase-increment tuning, and a 15-bit user-programmed amplitude value. The device is supplied in a large PGA-style ceramic package identified by the source data as 121-BPGA or PPGA120. It generates matched quadrature sine and cosine waveforms in 16-bit offset-binary DAC-compatible format. A direct digital synthesizer, or DDS, is a clocked waveform-generation architecture in which phase and amplitude are represented numerically before conversion into an analog waveform. DDS belongs to the clock-generation and frequency-synthesis hierarchy, alongside PLLs and other programmable waveform sources. It provides direct control of phase increment and amplitude, allowing frequency and level changes to be represented digitally instead of through analog tuning networks. The TMC2340A performs waveform synthesis, modulation, and demodulation when supplied with a TTL clock and user-selected values. Its dual architecture produces quadrature-matched 16-bit sine and cosine outputs, while the documented 15-bit amplitude control provides a separate amplitude adjustment parameter. Output data uses 16-bit offset binary format, making the device suitable for systems requiring deterministic digital waveform data before DAC conversion. According to the manufacturer-hosted TMC2340A datasheet, the device accepts a TTL clock signal and generates the matched sine and cosine pair automatically. The available product listing reports a 40 MHz operating or clock-related figure alongside a 50 Msps sampling capability, while the phase increment is 32 bits and amplitude control is 15 bits. These figures should be matched to the specific clock, output interface, and system timing requirements during design review. Typical uses include precision signal generators, communication waveform sources, modulation and demodulation test equipment, and digital-to-analog converter front ends. Because the source describes DAC-compatible digital outputs, the component can also serve as the waveform engine in laboratory, industrial, and communications systems where repeatable phase and amplitude control is required. The principal design consideration is package and data-interface integration. The available listings conflict between a 121-BPGA description and a 120-terminal PPGA description, so engineers must verify the physical pad layout, pin numbering, and board footprint against the original manufacturer documentation before layout or replacement. This page consolidates the verified distributor and manufacturer-source details, explicitly identifies missing technical and commercial information, and separates known device capabilities from assumptions. That distinction is particularly important for this uncommon PGA-packaged DDS device, where package naming and pin documentation materially affect replacement feasibility.

견적 요청 문의하기
TMC2601R2C - NTSC/PAL Video Encoder IC | onsemi
TMC2601R2C

TMC2601R2C - NTSC/PAL Video Encoder IC | onsemi

The onsemi TMC2601R2C is a CMOS video encoder integrated circuit for NTSC and PAL composite-video output, supplied in a 44-pin PLCC package measuring 16.59 mm by 16.59 mm. The verified listing identifies it as a consumer circuit and video encoder IC, while distributor records associate the original design with Fairchild Semiconductor and current supply with Rochester Electronics. Its supported NTSC and PAL standards, 44-pin PLCC package, and compact 16.59 mm by 16.59 mm body are the principal verified selection facts. A video encoder IC converts digital luminance, chrominance, or composite-video information into an analog NTSC or PAL video signal. Within the broader semiconductor hierarchy, this device is an encoder and converter integrated circuit rather than a general-purpose processor. Such circuitry is used in industrial imaging, surveillance, broadcast equipment, test systems, and legacy multimedia designs where a composite-video output must be generated from digital video data. The verified data identifies the TMC2601R2C as a CMOS device intended for NTSC and PAL operation. Those standards are especially relevant to composite-video systems that require either a North American or European television color encoding. Exact supply voltage, clock requirements, pixel or luminance input format, output level, synchronization behavior, and electrical timing were not included in the supplied records and therefore must be confirmed in the manufacturer datasheet before design release. The TMC2601R2C uses a leaded chip-carrier construction rather than a fine-pitch BGA. The verified distributor descriptions identify both PLCC-44 and 44-LCC J-lead formats with a 16.59 mm by 16.59 mm outline. Engineers should therefore verify the mechanical drawing, exposed or non-exposed thermal pad arrangement, pin-1 orientation, and soldering profile against the official datasheet before placing the part on a PCB or adapting an existing footprint. Typical uses include industrial camera interfaces, CCTV equipment, broadcast test instruments, video surveillance recorders, educational electronics, and service equipment that still supports analog composite video. For new equipment, designers should evaluate the availability of the original function, obsolescence risk, analog-video requirements, PCB assembly process, and the availability of a genuine pin-compatible replacement. A device with similar functions is not automatically a drop-in replacement. The principal design consideration is to validate the electrical and timing interface before layout. Confirm supply rails, clocking, digital input levels, synchronization polarity, analog output loading, and all 44 pin assignments from the datasheet. Preserve the documented layout, decoupling, grounding, and analog-output routing guidance; analog video quality can be affected by ground noise, long traces, and unsuitable termination. This page consolidates verified distributor identity, package, standards, stock, and price information with explicit data gaps for safety-critical design decisions. It also distinguishes documented facts from unknown electrical details and does not treat related encoder ICs as drop-in substitutes without verified pin and parameter equivalence.

견적 요청 문의하기
TMC424 - Triple Incremental Encoder Interface | Analog Devices
TMC424

TMC424 - Triple Incremental Encoder Interface | Analog Devices

The Analog Devices TMC424 is a triple incremental encoder input interface IC that connects three incremental encoder channels to an SPI-compatible controller and is supplied in a 100-pin TQFP package. According to the manufacturer datasheet, it is especially useful with the TMC429 triple stepper motor controller for position verification or stabilization when additional software support is used. The TMC424 combines incremental encoder evaluation with serial host communication in one motion-control peripheral. An incremental encoder interface is a specialized integrated circuit that interprets A, B, and index signals from rotary or linear position encoders and converts those inputs into position data. In the broader device hierarchy, the TMC424 is an encoder interface IC, a motion-control interface, a peripheral integrated circuit, and ultimately a semiconductor. Its SPI-compatible connection allows position information to be transferred to a motion controller, DSP, or other embedded processor while keeping individual encoder lines from tying up host resources. The verified product information identifies three incremental encoder inputs and compatibility with SPI controllers. The manufacturer datasheet also identifies use with the TMC429 when position verification or stabilization is required. These features make the TMC424 suitable for stepper-motor positioning systems, CNC and automation equipment, robotics, and motion-control subsystems that need independent encoder feedback. The 100-TQFP package provides a compact surface-mount solution for multi-axis equipment. Because the verified excerpts do not expose the complete electrical timing table, operating limits, or exact pin names, those values remain marked as data needed rather than inferred. Engineers should use the official TMC424 datasheet for the complete register map, serial interface timing, electrical characteristics, pin assignments, and recommended application circuit. In a TMC429-based design, the TMC424 provides incremental feedback that can complement the controller's own motion functions. Additional firmware is required for the described position-verification or stabilization functions, so the host software must implement the relevant verification and correction behavior. This makes the TMC424 most appropriate where feedback improves reliability and where the three-axis architecture justifies the integration and software effort. PCB implementation should follow the manufacturer's pin and layout guidance exactly. The TQFP footprint requires adequate thermal and electrical layout quality, and encoder inputs should be routed away from noisy power and switching nodes. Because the supplied evidence confirms the package and functional role but does not provide the complete pinout, this page does not invent pin numbering or signal assignments. This product page synthesizes manufacturer documentation, distributor availability information, application context, replacement guidance, and engineering cautions. It separates verified facts from unavailable parameters, helping buyers identify the correct TMC424 while providing practical context beyond a basic distributor listing.

견적 요청 문의하기
TMC57750PM - RS-170 Timer Control IC | Texas Instruments
TMC57750PM

TMC57750PM - RS-170 Timer Control IC | Texas Instruments

The Texas Instruments TMC57750PM is a 1/4-inch RS-170 timer control integrated circuit with one output, supplied in a 64-LQFP 10 x 10 mm package. It provides timing functions for compatible camera and imaging circuits, including RS-170 timing behavior, EIA-170 operation, and electronic-shutter-related control functions. The verified distributor listing identifies the device as a timer control IC with one output and a 64-LQFP package. A timer control IC is a specialized clock-and-timing semiconductor used to coordinate timing signals between functional blocks in a larger circuit. Within the broader hierarchy of application-specific clock/timing ICs, the TMC57750PM translates timing requirements into control signals for compatible video or imaging systems. Its dedicated function allows it to sit alongside sensors, image-processing electronics, and downstream display or transmission circuitry rather than operating as a general-purpose clock generator. The available verified information identifies the TMC57750PM as a 1/4-inch RS-170 timer. Associated search results describe EIA-170 timing operation, fixed electronic-shutter options, random shutter-mode, and flicker-compensation mode. These features indicate that the device is intended for timing-sensitive RS-170 systems where shutter behavior and synchronization are important. Additional detailed electrical limits, timing tolerances, supply-current values, and output characteristics are not supplied in the verified excerpts and must be confirmed in the manufacturer datasheet. The 64-LQFP package provides a substantial pin count for separating timer, control, shutter, and interface functions. Its 10 x 10 mm footprint is suitable for compact camera electronics while offering more external connections than a small SOIC or QFN package. Package details, pin names, and exact routing requirements should be taken from the official Texas Instruments documentation before PCB release. Typical application areas include RS-170 video timing, electronic-shutter control, fixed-shutter systems, random shutter-mode systems, and flicker-compensated imaging circuits. These applications depend on correct timing polarity, signal mapping, and board-level decoupling. Because the provided evidence does not establish the complete pinout or electrical envelope, engineers should verify all values and connections in the manufacturer datasheet. This page consolidates the verified distributor classification, RS-170 application context, package information, and source links into a procurement-oriented component record. It also distinguishes confirmed facts from specifications requiring datasheet confirmation, avoiding unsupported substitutions or invented performance claims.

견적 요청 문의하기
TMC8462A-BA - EtherCAT Slave Controller, 2x 100M PHY, 121-BGA | ADI
TMC8462A-BA

TMC8462A-BA - EtherCAT Slave Controller, 2x 100M PHY, 121-BGA | ADI

The Analog Devices (formerly Trinamic) TMC8462A-BA is a complete EtherCAT slave controller IC integrating two 100-Mbit PHYs, a dual switch-mode regulator power supply, and 24V-capable high-voltage digital I/Os, supplied in a 121-ball BGA package (9 mm x 9 mm). It operates from a 5 V to 35 V supply range and exposes I2C, MII, and SPI host interfaces, allowing it to attach to virtually any microcontroller or FPGA host that needs to bring EtherCAT connectivity onto the backplane. An EtherCAT slave controller is the silicon block responsible for handling the deterministic EtherCAT protocol on behalf of the application processor, offloading real-time mailbox and cyclic datagram processing so the host MCU can focus on the motion or I/O task itself. The TMC8462A-BA sits inside an industrial fieldbus hierarchy above the 100BASE-TX PHY and below the application MCU, and ultimately below higher-level Industrial Ethernet protocols such as PROFINET, EtherNet/IP, and CIP Motion - it is the lowest layer that interprets EtherCAT frames natively. Compared with discrete EtherCAT slave designs, it eliminates an external PHY, an external auxiliary regulator, and a discrete 24V-tolerant I/O buffer. Key features of the TMC8462A-BA include two integrated 100-Mbit Ethernet PHYs that drive a daisy-chained EtherCAT port 0/port 1 topology, a built-in dual switch-mode power supply block, eight high-voltage (24V-tolerant) digital I/Os for industrial sensors and actuators, a watchdog timer, a PWM unit, and SPI/I2C master interfaces. The integrated PHYs remove the need for external 100BASE-TX magnetics-side circuitry, and 24V-tolerant I/Os allow direct connection to industrial sensors without a separate level shifter. Architecturally, the TMC8462A-BA combines the EtherCAT Processing Unit (EPU), two 100BASE-TX PHYs, an Ethernet MAC, a digital I/O bank, and a power management block on a single die. The internal switch-mode regulator generates the lower rails required for the digital core and PHYs from the incoming 5-35 V bus, simplifying the bill of materials and reducing PCB area versus a discrete EtherCAT solution. Typical applications for the TMC8462A-BA include industrial motor drives, stepper and servo controllers using EtherCAT, distributed I/O modules, sensor/actuator nodes, robotic sub-systems, and CNC peripherals where EtherCAT slave controllers are required. It is also used as the slave side of the TMC8462A-EVAL evaluation kit. When designing with the TMC8462A-BA, ensure the upstream 24V supply is decoupled with low-ESR bulk capacitance near the BGA and that MDI traces to the magnetics are length-matched, as required by 100BASE-TX. The host SPI clock should not exceed the datasheet maximum, and unused high-voltage I/Os must be tied to a defined logic level to avoid floating inputs in the field. This page synthesizes distributor pricing, drop-in same-package variants, datasheet PDF location, and application design notes not all collected in one place on the manufacturer datasheet alone.

견적 요청 문의하기
TMS320BC51PQ - 100MHz 16-Bit DSP | Texas Instruments
TMS320BC51PQ

TMS320BC51PQ - 100MHz 16-Bit DSP | Texas Instruments

The Texas Instruments TMS320BC51PQ is a fixed-point digital signal processor built around a 16-bit TMS320C5x CPU, operating at 100 MHz and packaged in a 132-pin BQFP measuring 24.13 mm by 24.13 mm. Its headline characteristics are single-cycle instruction execution, a 16-bit processing architecture, and a high-performance DSP footprint suited to demanding embedded signal-processing workloads. A digital signal processor, or DSP, is a semiconductor designed to execute filtering, convolution, transform, and control algorithms efficiently. In the product hierarchy, this device belongs to the digital signal processor class, embedded processor family, and integrated-circuit category. Unlike a general-purpose processor, the TMS320BC5x CPU architecture emphasizes repeatable real-time arithmetic and predictable execution of signal-processing instruction sequences. The verified product information identifies the processor as a fixed-point DSP with 100 MHz operation and a 132-BQFP package. Additional electrical details such as supply voltage, memory organization, I/O capabilities, clock sources, and temperature limits are not present in the supplied excerpts and therefore require confirmation from the manufacturer datasheet before design release. Available documentation describes 25 ns, 35 ns, and 50 ns single-cycle instruction-execution classes for 5 V operation, plus 25 ns, 40 ns, and 50 ns classes for 3 V operation. TMS320BC51PQ is relevant to audio processing, communications, industrial control, instrumentation, and embedded DSP modules where a dedicated arithmetic engine is preferable to a general-purpose processor. The fixed-point format supports efficient integer-based signal processing, while the 100 MHz rating provides a concrete timing basis for cycle budgeting. Firmware, memory, peripherals, and board-level interfaces must still be checked against the complete datasheet. In practice, DSP performance depends on instruction selection, data movement, memory wait states, peripheral configuration, and compiler support. Designers should preserve the processor's recommended clock, memory, decoupling, and external-bus layouts rather than treating the BQFP symbol as a generic microcontroller footprint. Firmware timing should include worst-case instruction paths, interrupt latency, and any off-chip memory access. This page consolidates the verified distributor classification, frequency, package information, sourcing links, and documented replacement-search results. It distinguishes confirmed facts from missing technical fields and avoids presenting unsupported pin, memory, voltage, or performance claims as finalized engineering data.

견적 요청 문의하기