집적 회로

하위 카테고리

📁 ADC/DAC 3,100+ 제품 📁 증폭기 IC 1,900+ 제품 📁 오디오 코덱 18 제품 📁 오디오 IC 2 제품 📁 클록 및 타이밍 660+ 제품 📁 Comparator ICs 1 제품 📁 DSP 1,100+ 제품 📁 데이터 수집 IC 2 제품 📁 디지털 포텐셔미터 4 제품 📁 디스플레이 드라이버 및 컨트롤러 1 제품 📁 FPGA & CPLD 7,300+ 제품 📁 인터페이스 IC 3,300+ 제품 📁 LED 드라이버 1 제품 📁 로직 IC 460+ 제품 📁 메모리 IC 870+ 제품 📁 마이크로컨트롤러 20,000+ 제품 📁 마이크로프로세서 4 제품 📁 모터 드라이버 1 제품 📁 기타 1 제품 📁 Sensor and Detector Interfaces 1 제품 📁 특수 IC 15 제품 📁 비디오 IC 14 제품

제품 (39,000+)

DSPIC30F4013-30I/PT - 16-bit DSC, 30 MIPS, 48KB Flash | Microchip
DSPIC30F4013-30I/PT

DSPIC30F4013-30I/PT - 16-bit DSC, 30 MIPS, 48KB Flash | Microchip

The Microchip Technology DSPIC30F4013-30I/PT is a 16-bit Digital Signal Controller (DSC) in the dsPIC30F family, integrating DSP compute throughput with full MCU peripheral integration. It executes up to 30 MIPS at 5V, packs 48KB of Flash program memory (16K x 24 words) and 2KB of RAM, and is housed in a 44-pin TQFP (10x10 mm) package. The device targets closed-loop motor control and power-conversion firmware where deterministic DSP performance and rich analog/digital peripherals are both required on one die. A Digital Signal Controller (DSC) sits in the silicon hierarchy between microcontroller (MCU) and digital signal processor (DSP). It combines a microcontroller's deterministic interrupt handling, byte-oriented peripheral set, and C-friendly toolchain with a DSP engine capable of single-cycle MAC operations, fractional/integer arithmetic, and zero-overhead looping. The dsPIC30F family specifically targets motor control, SMPS, and power-factor-correction applications where PID loops, Clarke/Park transforms, and space-vector modulation run in tight deterministic cycles alongside CAN, UART, and PWM peripherals. Key features of the DSPIC30F4013-30I/PT include an integrated CAN 2.0B controller, six 16-bit PWM channels with complementary outputs and dead-time control suitable for 3-phase inverter drives, a 12-bit ADC with up to 13 input channels and 200 ksps conversion rate, four 16-bit timers, two UART modules, one SPI and one I2C bus, plus 9-channel motor-control PWM hardware. The modified Harvard CPU architecture with C-optimized instruction set provides 84 base instructions and flexible addressing modes for both DSP and control code. Technically, the 30 MIPS performance at 5V (DC to 40 MHz external oscillator with 4x PLL option) supports real-time FOC motor loops at switching frequencies up to 20 kHz. The 16-bit data path with DSP-engine double-precision accumulators prevents overflow during cascaded IIR filter stages, and the 30 KB of auxiliary Flash supports self-programming and table reads in motor commutation tables. Typical applications include 3-phase BLDC and PMSM motor drives, sensorless FOC motor controllers, uninterruptible power supplies, digital PFC stages, solar inverters, and industrial CAN-node motor controllers. The wide operating temperature range of -40C to +85C supports both consumer and industrial deployment. When designing with this part, budget I/O pin mapping carefully: the 44-TQFP exposes most analog and PWM pins but fewer GPIO than larger dsPIC30F variants, so verify pin assignment against your inverter topology and ADC channel count before PCB layout. This page synthesizes distributor stock and pricing, parametric drop-in alternatives, and practical design notes not found in the bare manufacturer datasheet, delivering an engineer-ready brief in one read.

견적 요청 문의하기
DSPIC30F4013T-20E/ML - 16-bit DSC, 48KB Flash, 44-QFN | Microchip
DSPIC30F4013T-20E/ML

DSPIC30F4013T-20E/ML - 16-bit DSC, 48KB Flash, 44-QFN | Microchip

The Microchip Technology DSPIC30F4013T-20E/ML is a 16-bit Digital Signal Controller (DSC) from the dsPIC30F motor-control family, integrating a 20 MIPS dsPIC30F core with 48KB (16K x 24) of Flash program memory, 2KB of RAM, and 1KB of EEPROM in a 44-pin QFN (8x8 mm) package with exposed thermal pad. The device operates from 3.0V to 5.5V, supports an internal oscillator, and integrates a dedicated motor-control PWM module, a 10/12-bit ADC, and four fault inputs, making it purpose-built for variable-frequency motor drives and digital power conversion. A Digital Signal Controller is a hybrid between a microcontroller and a DSP, sitting in the hierarchy DSC -> microcontroller -> embedded processor -> semiconductor. The dsPIC30F family extends standard MCU architecture with a modified Harvard bus, hardware MAC/DSP engine, and dual-operand fetch, enabling deterministic single-cycle multiply-accumulate operations and zero-overhead loops while preserving the deterministic interrupt model of a traditional MCU. This makes dsPIC30F devices the canonical choice for motor control and power-electronics firmware, where both control-loop determinism and signal-processing throughput are required. Key features of the DSPIC30F4013 include a 6-channel 10-bit ADC with 500 ksps throughput, a 6-channel 16-bit motor-control PWM with complementary outputs and programmable dead time, a Quadrature Encoder Interface (QEI) for sensored BLDC/PMSM feedback, a CAN 2.0B module, plus I2C, SPI, and UART peripherals. The 30F core executes most instructions in one clock cycle and supports fractional and integer saturation logic, simplifying digital filter and PID implementations. The 44-pin QFN exposed-pad package lowers thermal resistance for sustained PWM operation. Typical applications include 3-phase induction motor drives, BLDC/PMSM sensored and sensorless controllers, uninterruptible power supplies (UPS), power-factor correction stages, and digital audio class-D amplification. The built-in PWM with fault inputs also suits welding inverters and solar inverters that require hardware-level shoot-through protection. When designing with this part, allocate adequate copper area under the exposed thermal pad; sustained PWM switching at full load creates significant thermal load. Use Microchip's MPLAB X IDE with the XC16 compiler and dsPIC30F peripheral libraries to accelerate development. For legacy inventory and lifecycle management, the DSPIC30F4013T-20E/ML offers Microchip's seamless migration path to dsPIC33F and PIC24 devices in similar packages, protecting firmware investment across product revisions. This page consolidates pricing, drop-in alternatives, and design guidance not found in the bare datasheet.

견적 요청 문의하기
DSPIC30F4013T-20I/ML - 20 MIPS 16-bit DSC | 48KB Flash | Microchip
DSPIC30F4013T-20I/ML

DSPIC30F4013T-20I/ML - 20 MIPS 16-bit DSC | 48KB Flash | Microchip

The Microchip DSPIC30F4013T-20I/ML is a 16-bit Digital Signal Controller (DSC) from the dsPIC30F family, featuring a 20 MIPS modified Harvard RISC engine with DSP enhancements, 48 KB (16K x 24) of on-chip Flash program memory and 2 KB of RAM, housed in a 44-pin QFN (8x8 mm) package with industrial -40C to +85C temperature rating. The 'T' suffix denotes Tape & Reel packaging. A digital signal controller (DSC) is a hybrid device that combines a microcontroller's deterministic control peripherals with a digital signal processor's (DSP) computational throughput for closed-loop motor control, power conversion, and sensor processing. Within the broader taxonomy, the dsPIC30F sits at the intersection of microcontrollers and DSPs, enabling single-chip implementations that previously required a dedicated MCU plus a DSP. The 20 MIPS core delivers single-cycle 16x16 MAC operations, sufficient for field-oriented control (FOC) of three-phase motors and digital power conversion at switching frequencies up to ~50 kHz. Key features include 13 channels of 12-bit Analog-to-Digital conversion (up to 200 ksps), one 16-bit timer/capture input and one 16-bit timer/PWM output pair, plus a dedicated Motor Control PWM module with up to six PWM outputs and complementary mode. Communication peripherals include one UART/USART, one I2C, one SPI, and one CAN module (CAN 2.0B active). The 44-QFN (ML) package offers an exposed thermal pad with low thermal resistance suitable for power conversion applications. The device operates from 3.0 V to 5.5 V supply and is supported by the MPLAB X IDE and MPLAB XC16 compiler. It targets motor control, sensorless BLDC, AC induction drives, and digital PFC/PSU applications. According to Microchip datasheet DS70138G, the 16-bit DSP engine enables accurate math for control loops while the integrated peripherals reduce BOM cost. When designing with this device, ensure the supply decoupling follows the 100 nF + bulk capacitor arrangement specified in the datasheet and that the exposed pad is soldered for proper thermal dissipation. The CAN bus signals require external transceivers; the dsPIC30F4013 implements only the protocol controller.

견적 요청 문의하기
DSPIC30F4013T-20I/PT - 16-bit DSC, 48KB Flash, 20 MIPS | Microchip
DSPIC30F4013T-20I/PT

DSPIC30F4013T-20I/PT - 16-bit DSC, 48KB Flash, 20 MIPS | Microchip

The Microchip Technology DSPIC30F4013T-20I/PT is a 16-bit Digital Signal Controller (DSC) that fuses a high-performance dsPIC30F DSP engine with a microcontroller core, delivering up to 20 MIPS at 5V in a 44-pin TQFP (10x10 mm) package. It integrates 48 KB (16K x 24) of Flash program memory, 2 KB of SRAM data memory, and 1 KB of EEPROM, providing ample headroom for motor-control firmware, sensor-fusion routines, and DSP-style signal processing on a single chip. The 16-bit modified Harvard architecture pairs a C-optimized instruction set with dual 40-bit accumulators and a single-cycle MAC, letting the part execute control loops while simultaneously running DSP filter math. A Digital Signal Controller (DSC) sits in the component taxonomy as a hybrid between a microcontroller (MCU) and a digital signal processor (DSP). DSCs add hardware multiply-accumulate (MAC) units and barrel shifters to a deterministic MCU core so the same device can sequence I/O, run a PID loop, and execute FFT or FIR filtering without off-loading to a separate DSP. The dsPIC30F4013 specifically targets motor-control and power-conversion applications where closed-loop torque/speed control, field-oriented control (FOC), and current sampling are all required inside a single 5V-tolerant silicon die. Key features include 20 MIPS sustained throughput (50 ns instruction cycle), six PWM channels with complementary or independent outputs, a 6-channel 12-bit 200 ksps ADC with simultaneous sampling, three 16-bit timers, two UART, one SPI, one I2C, and a CAN 2.0B module. On-chip Motor Control PWM (MCPWM) provides dead-time control and center-aligned PWM, eliminating the need for an external motor-control ASIC. Up to 30 interrupt sources with seven priority levels support deterministic real-time response. The 5V supply range (4.5V-5.5V) and -40C to +85C industrial operating window let the DSPIC30F4013T-20I/PT interface directly with 5V analog front-ends, gate drivers, and 5V CAN transceivers without level shifters. The 44-TQFP package offers a generous 0.8 mm pitch for hand-prototyping while still fitting typical 1-2 oz copper 2-layer boards; theta_JA is approximately 50 C/W with adequate copper, sufficing for motor-drive currents up to a few amps at modest switching frequencies. Typical applications include BLDC and PMSM motor drives, sensorless FOC motor controllers, switched-mode power supplies with digital control loops, industrial automation PLCs, and automotive body controllers using the on-chip CAN interface. The on-chip 12-bit ADC and PWM make it a single-chip solution for low-voltage motor inverters in appliances, fans, and pumps. Designers should size the decoupling network to the switching frequency of the driven load - a 100 nF ceramic plus 10 uF tantalum near VDD is typical, plus a bulk cap on AVdd to keep the ADC reference clean during PWM transitions. The TQFP-44 package pinout is shared across the dsPIC30F4011/4012/4013 family, so firmware can be ported between flash-density variants without board rework. This page synthesizes DigiKey pricing, drop-in package-compatible alternatives, application guidance, and design notes not consolidated on the manufacturer datasheet - enabling faster component selection and BOM validation.

견적 요청 문의하기
DSPIC30F4013T-30I/PT - 16-bit DSC, 48KB Flash, 30MIPS | Microchip
DSPIC30F4013T-30I/PT

DSPIC30F4013T-30I/PT - 16-bit DSC, 48KB Flash, 30MIPS | Microchip

The Microchip Technology DSPIC30F4013T-30I/PT is a 16-bit Digital Signal Controller (DSC) in the dsPIC30F family, delivering 30 MIPS of processing power with 48 KB (16K x 24) of on-chip Flash program memory in a 44-pin TQFP (10x10 mm) package. The 'T' suffix indicates Tape & Reel packaging, while '30I' specifies the 30 MIPS performance class and industrial -40C to +85C operating temperature range. It is targeted at motor control and digital power conversion applications. A Digital Signal Controller is a hybrid device that combines the deterministic interrupt response and peripheral set of a microcontroller with the mathematical throughput of a DSP. The dsPIC30F4013 belongs to the DSC family within the broader category of embedded microcontrollers, sitting hierarchically between 8-bit PIC MCUs and 32-bit dsPIC33/PIC32 devices. Its modified Harvard architecture provides separate program and data buses with a 24-bit wide instruction word, enabling single-cycle MAC operations. Key features include a 16-bit data path with DSP engine, six 16-bit timers, six PWM channels (three pairs) ideal for 3-phase motor control, a 10-bit ADC with up to 13 input channels and 200 ksps conversion rate, two UART modules, one SPI port, one I2C port, a CAN 2.0B module, and a QEI (Quadrature Encoder Interface) for position feedback. The device operates from 2.5V to 5.5V and integrates a 4x phase-locked loop. The DSP engine includes a 40-bit wide accumulator with optional saturation logic, a 17-bit x 17-bit multiplier, and dual 40-bit saturating working registers. Barrel shifter and DO/REPEAT hardware loops accelerate filter and transform math. The single-cycle MAC at 30 MIPS gives an aggregate 60 MMACs/s, sufficient for field-oriented control of PMSM and BLDC motors. Typical applications include 3-phase brushless DC (BLDC) and permanent magnet synchronous motor (PMSM) drives, sensorless motor control using BEMF or flux estimation, uninterruptible power supplies, digital UPS front-end PFC stages, solar microinverters, and industrial automation servo loops. The integrated CAN and QEI peripherals make it well suited to networked industrial equipment. When designing with this device, ensure the MCLR reset circuit uses a proper RC network and that the on-chip LDO regulator is bypassed with the recommended capacitor combination. For motor control applications, place the device's PWM outputs close to the gate drivers to minimize switching noise coupling back into the analog ADC inputs. This page synthesizes distributor pricing, drop-in alternatives within the same 44-pin TQFP footprint, and practical design notes not found in the manufacturer datasheet alone, helping procurement and engineering teams make faster, better-informed decisions.

견적 요청 문의하기
DSPIC30F5011-20E/PT - 20 MIPS 16-bit DSC, 66KB Flash | Microchip
DSPIC30F5011-20E/PT

DSPIC30F5011-20E/PT - 20 MIPS 16-bit DSC, 66KB Flash | Microchip

The Microchip DSPIC30F5011-20E/PT is a 20 MIPS, 16-bit Digital Signal Controller (DSC) integrating DSP functionality into a high-performance 16-bit MCU architecture, with 66 KB of on-chip Flash program memory, housed in a 64-pin TQFP (10x10 mm) package. It is a member of the dsPIC30F general-purpose family, designed for seamless migration to dsPIC33F and PIC24 devices in similar packages. A Digital Signal Controller (DSC) is a hybrid MCU that combines a traditional microcontroller's peripheral set, deterministic interrupt handling, and ease of use with a DSP engine capable of single-cycle MAC operations. The dsPIC30F5011 specifically belongs to the broader hierarchy of microcontrollers -> 16-bit MCU/DSC -> digital signal controllers -> embedded control solutions, and is engineered for real-time closed-loop control, motor drive, and signal-processing tasks where an 8-bit MCU is too slow and a dedicated DSP is overkill. Key differentiating features include 4 KB of SRAM, a 16-bit timer/counter module, multiple communication peripherals, a 10-bit or 12-bit ADC option depending on family member, 20 MIPS sustained throughput at 20 MHz oscillator, and an extended temperature grade of -40C to +125C for industrial and automotive under-hood applications. The device operates across 2.5V to 5.5V (3.3V/5V tolerant I/O) and includes robust peripherals suited to power-conversion and motor-control loops. At the architecture level, the dsPIC30F5011 uses a Harvard-style modified RISC core with a 24-bit instruction word, dual data paths (X and Y) for the DSP engine, and zero-overhead looping. The DSP engine adds a 40-bit accumulator, barrel shifter, and single-cycle 16x16 -> 40-bit MAC, enabling efficient IIR/FIR filtering, FFT, and Park/Clark transforms without burdening the main CPU. Internal PLL options multiply an external oscillator up to the device's rated MIPS. Typical applications include AC/DC and DC/AC power conversion, BLDC and PMSM motor control, UPS and PFC stages, audio processing front-ends, and industrial sensor conditioning. The wide operating voltage and extended temperature range make it well suited to industrial automation, solar inverters, and appliance motor drives. When designing with this device, ensure decoupling is placed close to each VDD/VSS pair, that the analog and digital grounds are joined at a single point near the on-chip regulator, and that the ADC reference pin is bypassed with a low-ESR ceramic. Verify that the chosen oscillator mode and PLL configuration keep the instruction frequency at or below the device's 20 MIPS rated throughput, as overclocking voids the timing guarantees in the datasheet. This page synthesizes distributor pricing, drop-in same-package alternatives, and practical design notes not found in the manufacturer datasheet, giving an engineer a faster path from selection to layout.

견적 요청 문의하기
DSPIC30F5011-20I/PT - 16-bit DSC, 66KB Flash, 64-TQFP | Microchip
DSPIC30F5011-20I/PT

DSPIC30F5011-20I/PT - 16-bit DSC, 66KB Flash, 64-TQFP | Microchip

The Microchip Technology DSPIC30F5011-20I/PT is a 16-bit Digital Signal Controller (DSC) combining a high-performance modified RISC MCU core with a DSP engine, packaged in a 64-pin TQFP (10x10 mm) for industrial temperature operation (-40C to +85C). It features 66 KB of program Flash, 4 KB of RAM, 1 KB of EEPROM, and operates from 2.5V to 5.5V across the full temperature range. A Digital Signal Controller (DSC) is a class of microcontroller that integrates a Digital Signal Processor (DSP) engine with a general-purpose MCU on a single die, enabling deterministic real-time control with single-cycle MAC operations for high-throughput math. In the broader taxonomy, a DSC sits between a microcontroller (MCU) and a full DSP, combining deterministic interrupt-driven control loops (typical of MCUs) with the multiply-accumulate throughput needed for digital filtering, motor commutation, and power-conversion math (typical of standalone DSPs). Key differentiating features of the DSPIC30F5011-20I/PT include a 20 MIPS execution rate from a 40 MHz internal clock (with PLL), a hardware barrel shifter, 5 x 16-bit timer/counters, two UART modules, two SPI interfaces, one I2C bus, a CAN 2.0B module, an 8-channel 10-bit ADC at 500 ksps, and up to 52 digital I/O pins. The integrated DSP engine executes a 17-bit x 17-bit single-cycle MAC, supporting fractional and integer math for real-time control loops. Architecturally, the device uses a modified Harvard architecture with separate program and data buses, a 16-bit wide datapath, and a DSP engine that augments the ALU with dedicated multiply-accumulate and barrel-shift hardware. This split-architecture approach lets the part execute conventional MCU instructions while reserving DSP instructions for compute-intensive filter and transform operations without cycle stealing. Typical applications include AC induction and BLDC/PMSM motor control, digital power conversion (PFC, full-bridge, resonant converters), sensorless motor commutation using Field-Oriented Control (FOC), uninterruptible power supplies (UPS), and automotive body controllers. The CAN 2.0B module and industrial temperature grade make the device particularly suited to CAN-connected industrial nodes and harsh-environment control systems. When designing with this device, allocate a 2.5V to 5.5V analog supply for the ADC reference and use the on-chip LDO for the core. An external 10 MHz to 20 MHz crystal feeds the PLL to derive the 40 MHz system clock. Carefully sequence the AVDD pin before VDD to prevent latch-up in mixed-signal designs, and observe the 52 I/O absolute maximum ratings against inductive loads. This page synthesizes distributor pricing, drop-in same-package alternatives, and practical design notes that complement - rather than duplicate - the manufacturer datasheet, giving procurement and engineering teams a single decision-ready reference.

견적 요청 문의하기
DSPIC30F5011-30I/PT - 16-bit DSC, 30 MIPS, 66KB Flash | Microchip
DSPIC30F5011-30I/PT

DSPIC30F5011-30I/PT - 16-bit DSC, 30 MIPS, 66KB Flash | Microchip

The Microchip DSPIC30F5011-30I/PT is a 16-bit Digital Signal Controller (DSC) from the dsPIC30F general-purpose family, integrating DSP-class compute performance with the simplicity of a microcontroller. The device delivers up to 30 MIPS of throughput from a modified Harvard RISC CPU and packs 66 KB of on-chip Flash program memory, 4 KB of RAM, and a 1 KB data EEPROM into a 64-pin TQFP (10x10 mm) package. Industrial temperature grade (-40C to +85C) and 2.5V/3.3V/5V operating range make it broadly deployable across mains-powered and battery-backed systems. A Digital Signal Controller is a hybrid device that merges a deterministic microcontroller core with single-cycle MAC (multiply-accumulate) hardware, sitting in the hierarchy between a pure MCU and a standalone DSP. Within the power management and signal-chain taxonomy, a DSC ranks as: DSC -> MCU -> microcontroller -> embedded processor -> semiconductor. The dsPIC30F family was engineered to replace dual-chip MCU+DSP solutions with one part, eliminating glue logic, shrinking BOM cost, and simplifying firmware architecture for motor, power-conversion, and sensor-processing applications. Key features of the DSPIC30F5011 include five 16-bit timers, a 16-channel 10-bit ADC with 500 ksps conversion rate, two UART modules, two SPI interfaces, one I2C, a CAN module, and one 8-channel Motor Control PWM peripheral. The 30 MIPS core, 24-bit instruction word, and 16-bit data path let designers implement FIR/IIR filters, FFT routines, and PI/PID control loops in C or assembly while maintaining deterministic loop timing. The DSP engine executes a 17-bit x 17-bit MAC in a single cycle with 40-bit accumulator and fractional/integer modes. Typical applications are three-phase AC induction and BLDC motor drives, switch-mode power supply (SMPS) digital control loops, uninterruptible power supplies (UPS), power-factor correction (PFC) stages, sensorless field-oriented control (FOC) of PMSM motors, and audio/voice-band signal processing. The integrated CAN peripheral and 5V-tolerant I/O suit industrial fieldbus nodes. Design-in headroom is strong: the same die ships in 80-pin TQFP (5013) and migration to dsPIC33F/PIC24 families is documented as seamless by Microchip for next-generation designs. When designing with the DSPIC30F5011-30I/PT, allocate decoupling capacitors within 5 mm of every VDD/VSS pair, route the 30 MHz crystal traces as short and guarded as possible, and observe the 4 ms maximum Flash write time when scheduling EEPROM-emulation routines. Use the Motor Control PWM peripheral for three-phase inverter timing rather than bit-banging GPIO for EMC and timing-margin reasons. This page synthesizes distributor pricing, drop-in same-family alternatives, and application context not found in the standalone datasheet, helping engineers compare, source, and design with the DSPIC30F5011-30I/PT in a single view.

견적 요청 문의하기
DSPIC30F501130IP - 16-bit 30 MIPS DSP MCU, 66KB Flash, 64-TQFP | Microchip
DSPIC30F501130IP

DSPIC30F501130IP - 16-bit 30 MIPS DSP MCU, 66KB Flash, 64-TQFP | Microchip

The Microchip Technology DSPIC30F501130IP is a 16-bit Digital Signal Controller (DSC) from the dsPIC30F family that combines MCU control capability with DSP throughput at 30 MIPS performance. Housed in a 64-pin TQFP (10x10 mm) package, this device integrates 66 KB of Flash program memory (22K x 24), 4 KB of RAM, and 1 KB of EEPROM data storage on-chip, providing a balanced memory profile for embedded signal-processing applications. A Digital Signal Controller (DSC) is a hybrid microcontroller architecture that pairs a traditional MCU-style deterministic control loop with a DSP-grade multiply-accumulate (MAC) engine. In the broader taxonomy, the dsPIC30F sits between a microcontroller and a full DSP - the device is a microcontroller with DSP extensions (single-cycle MAC, dual 40-bit accumulators, barrel shifter) and 16-bit native datapath, optimized for closed-loop control loops with on-chip signal conditioning, such as motor control, power conversion, and sensor-fusion front-ends. Key features of the DSPIC30F501130IP include 30 MIPS operation from a 5V supply, an enhanced 16-bit dsPIC core with single-cycle multiply, dual 40-bit accumulators, and a barrel shifter. The device integrates motor-control PWM, a 12-bit A/D converter with multiple channels, UART/SPI/I2C peripherals, and a 16-bit timer/capture module. The wide 5V-tolerant I/O and operating range make this part well suited to industrial motor control and noisy automotive environments where 3.3V parts can be marginal. Architecturally, the dsPIC30F5011 uses a Harvard memory structure with separate program and data buses, allowing simultaneous access to Flash and RAM for deterministic interrupt response. The DSP engine is implemented as a software-visible set of DSP instructions (MAC, ED, EDAC) layered on top of the standard MIPS-style ALU, giving C compilers automatic DSP acceleration through intrinsic support in MPLAB XC16. Typical applications for the DSPIC30F501130IP include three-phase AC induction motor drives, BLDC/PMSM sensorless field-oriented control (FOC), uninterruptible power supplies (UPS), digital power-conversion PFC stages, automotive sensor conditioning, and industrial process control loops. The combination of 66 KB Flash and 1 KB EEPROM enables in-field firmware upgrades and persistent parameter storage in motor-control designs. When designing with this device, allocate the 4 KB RAM budget between DSP data buffers and stack/heap carefully - FFT and FIR routines consume 1-2 KB of working memory, leaving limited headroom for large RTOS stacks. Consider migrating to dsPIC33F or PIC24 families for higher speed and more memory if headroom is tight.

견적 요청 문의하기
DSPIC30F5011T-30I/PT - 16-bit DSC, 30 MIPS, 66KB Flash | Microchip
DSPIC30F5011T-30I/PT

DSPIC30F5011T-30I/PT - 16-bit DSC, 30 MIPS, 66KB Flash | Microchip

The Microchip Technology DSPIC30F5011T-30I/PT is a high-performance 16-bit Digital Signal Controller (DSC) in the dsPIC30F family, delivering 30 MIPS of processing power from a 5V (2.5V-5.5V) supply in a 64-pin TQFP package supplied on tape and reel. It integrates 66 KB of Flash program memory (22K x 24 words), 4 KB of SRAM data memory, and 1 KB of EEPROM, paired with a 16-channel 12-bit Analog-to-Digital Converter (ADC) and 52 general-purpose I/O pins. What is a Digital Signal Controller? A DSC is a hybrid between a microcontroller (MCU) and a Digital Signal Processor (DSP). The MCU side provides deterministic interrupt response and rich peripherals (timers, UART, SPI, I2C, CAN), while the DSP side adds a single-cycle MAC unit, barrel shifter, and dual 40-bit accumulators so that the core can execute FIR/IIR filters, FFTs, and PID loops in real time. In the system hierarchy, the DSC sits between a generic MCU and a standalone DSP, giving designers a single-chip solution for closed-loop motor control, audio processing, and power conversion that previously required a controller + DSP pair. Key features of the DSPIC30F5011 include a 30 MIPS modified Harvard core, hardware multiply-accumulate for single-cycle DSP operations, a 12-bit 200 ksps ADC with up to 16 channels, motor-control PWM with dedicated fault inputs, and CAN/UART/SPI/I2C communication peripherals. It supports 2.5 V to 5.5 V operation across an industrial -40 C to +85 C temperature range, and includes JTAG/ICSP for in-circuit debug. The architecture uses a 16-bit modified Harvard core with separate program and data buses, plus a DSP engine that lets C-compiler-generated code reach near-assembly efficiency on filter math. A 30 MIPS instruction throughput gives the headroom to run 10 kHz+ control loops while leaving CPU time for housekeeping. Typical applications include BLDC and PMSM motor control (sensored or sensorless), three-phase UPS and power inverter control, audio processing and active noise cancellation, sensor signal conditioning, and industrial automation PLC modules. The integrated motor-control PWM and 12-bit ADC make it a single-chip solution for FOC and trapezoidal commutation. When designing with this part, allocate the 52 GPIO pins across analog inputs, PWM outputs, encoder feedback, and communications. Use the DSP engine for math-heavy loops and reserve the main CPU for state machines and communication stacks. Plan the PCB layout so the analog AVSS/AVDD pair is decoupled separately from the digital supply and routed on a quiet ground island. This page consolidates distributor pricing, same-package drop-in alternatives from the Microchip dsPIC30 family, and PCB-level design notes that are not duplicated in the manufacturer datasheet.

견적 요청 문의하기
DSPIC30F5011T-30I/PTG - 30 MIPS 16-bit DSC, 64KB Flash | Microchip
DSPIC30F5011T-30I/PTG

DSPIC30F5011T-30I/PTG - 30 MIPS 16-bit DSC, 64KB Flash | Microchip

The Microchip Technology DSPIC30F5011T-30I/PTG is a 16-bit Digital Signal Controller (DSC) in the dsPIC30F family, delivering 30 MIPS of computational throughput from a 64-pin TQFP (10x10 mm) surface-mount package on tape and reel. According to the manufacturer datasheet (Microchip document 70116J), it integrates 66KB (22K x 24) of program Flash, 2KB (1K x 16) of data RAM, and 1KB (1K x 8) of EEPROM, with up to 52 programmable digital I/O pins. The 'T' suffix denotes tape-and-reel packaging and 'I' denotes the industrial -40C to +85C operating range. A Digital Signal Controller is a hybrid MCU+DSP that combines a deterministic microcontroller core with single-cycle MAC DSP engine hardware. In the device taxonomy, the dsPIC30F5011 sits below: DSC -> 16-bit DSC -> dsPIC30F family -> dsPIC30F5011/5013 sub-family. It bridges traditional microcontrollers (control-oriented, deterministic interrupt response) and DSPs (high-throughput numeric processing), allowing a single chip to perform closed-loop control and audio/sensor/motor DSP in the same firmware. Key features include a 30 MIPS modified Harvard architecture core, single-cycle 16x16 MAC, on-chip 12-bit ADC (up to 16 channels, 200 ksps), multiple 16-bit timers, UART/SPI/I2C/CAN communication peripherals, a 5V tolerant digital I/O design, and low-power Idle/Doze/Sleep modes. The device operates from 2.5V to 5.5V, providing direct interface to 5V logic without level shifters. Architecturally, the part uses a modified Harvard bus with separate program and data paths and a 24-bit-wide instruction word, which is why program Flash is sized in 24-bit words (22K x 24 = 66KB). The wide path enables DSP-oriented addressing modes and saturating arithmetic, while the MCU-style peripheral set keeps interrupt latency deterministic for real-time control loops. Typical applications include industrial motor control (BLDC, PMSM, ACIM), sensorless field-oriented control (FOC) drives, switched-mode power supply (SMPS) digital control loops, automotive body and sensor modules, audio processing (DSP filters, equalizers, echo cancellation), and medical instrumentation. Designers value the 5V tolerance and rich peripheral mix when targeting industrial 24V/5V systems with mixed analog/digital signal chains. For robust operation, place a 10uF bulk capacitor plus a 100 nF decoupling capacitor as close as possible to each VDD/VSS pair on the PCB. The 64-pin TQFP (PT) footprint is footprint-compatible with the dsPIC30F5013 and several dsPIC33F/PIC24 migration devices listed in Microchip's migration guide, allowing field upgrades without PCB rework. This page synthesizes verified distributor pricing, drop-in alternatives, and practical design notes not found in a single manufacturer page.

견적 요청 문의하기
DSPIC30F5013T-30I/PT - 30 MIPS 16-bit DSC, 66KB Flash | Microchip
DSPIC30F5013T-30I/PT

DSPIC30F5013T-30I/PT - 30 MIPS 16-bit DSC, 66KB Flash | Microchip

The Microchip Technology DSPIC30F5013T-30I/PT is a 16-bit Digital Signal Controller (DSC) from the dsPIC30F general-purpose family, delivering up to 30 MIPS (Million Instructions Per Second) of processing performance with an integrated DSP engine. Housed in an 80-pin TQFP (12x12 mm) package, the device integrates 66 KB (22K x 24-bit) of Flash program memory, 4 KB of RAM, and a rich peripheral set designed for embedded motor control, power conversion, and sensor-processing applications. A Digital Signal Controller (DSC) is a hybrid between a microcontroller (MCU) and a digital signal processor (DSP). The dsPIC30F core combines a deterministic modified Harvard MCU architecture with single-cycle MAC and barrel shifter DSP instructions, enabling real-time control loops and high-throughput signal processing on a single chip. In the broader taxonomy it belongs to: dsPIC -> DSC -> MCU -> embedded processor -> semiconductor IC. The '30I' suffix denotes the -40C to +85C industrial temperature range, and the '/PT' suffix indicates the 80-pin TQFP package supplied on Tape & Reel. Key features include 30 MIPS operation from a 2.5V to 5.5V supply, two 10-bit A/D converters (up to 16 channels), two 10-bit D/A converters, two UART modules, two SPI ports, one I2C bus, two CAN modules, two capture inputs, six PWM/compare outputs, two quadrature encoder interfaces, and a 16-bit timer. The integrated DSP engine supports fractional and integer arithmetic with deterministic interrupt latency, making the device well suited to closed-loop control. Typical applications include three-phase AC induction motor control, sensorless BLDC commutation, UPS and PFC boost power factor correction, digital audio processing, and industrial sensor conditioning. The combination of CAN, PWM, QEI, and high-resolution ADC simplifies designs that previously required a separate DSP and MCU. Compared with the dsPIC30F4011 family, the 5013 offers expanded analog channels and dual CAN modules. When designing with this part, observe the Vdd/Vss decoupling guidance from the manufacturer datasheet (place 0.1 uF ceramics within 5 mm of each supply pin) and respect the 30 MIPS maximum throughput (one instruction cycle = four oscillator periods). For migration to newer silicon, Microchip documents seamless paths to dsPIC33F and PIC24 devices in the same 80-pin TQFP footprint. This page synthesizes distributor pricing, drop-in same-family alternatives, and practical design notes that go beyond the manufacturer datasheet by comparing parametric and packaging trade-offs across the dsPIC30F family.

견적 요청 문의하기
DSPIC30F5015-20E/PT - 16-bit DSC, 66KB Flash, 20 MIPS | Microchip
DSPIC30F5015-20E/PT

DSPIC30F5015-20E/PT - 16-bit DSC, 66KB Flash, 20 MIPS | Microchip

The Microchip DSPIC30F5015-20E/PT is a 16-bit Digital Signal Controller (DSC) that combines the high performance of a DSP with the simplicity of a microcontroller, delivering 20 MIPS throughput in a 64-pin TQFP (10x10 mm) package. The device integrates 66 KB of Flash program memory (22K x 24-bit words), 4 KB of RAM, and 1 KB of EEPROM data memory, plus a 16-channel 12-bit ADC and a dedicated motor-control PWM module. A Digital Signal Controller is a hybrid architecture that pairs a modified Harvard RISC CPU with a DSP engine, enabling single-cycle MAC (multiply-accumulate) operations and barrel shifting. In the broader system hierarchy, the DSC sits between a pure microcontroller (MCU) used for general control tasks and a dedicated DSP used for high-throughput signal processing. This positioning makes the dsPIC30F family ideal for closed-loop control loops where both deterministic interrupt response and real-time math are required on a single chip. Key features of the DSPIC30F5015-20E/PT include a 20 MIPS dsPIC30F core operating from a 4.0V to 5.5V supply (the 'E' suffix indicates the extended industrial temperature range of -40C to +125C), a CAN 2.0B module, two UART/SPI/I2C peripherals, a 16-channel 12-bit 200 ksps ADC, a motor-control PWM with up to 8 output channels and 4 duty-cycle generators, and 5 16-bit timer/counters. The integrated DSP engine handles 16x16-bit fractional or integer MAC in a single instruction cycle, simplifying digital filter, FFT and field-oriented motor-control implementation. The architecture is built on a 5-stage pipeline with a 24-bit wide instruction word, allowing most instructions to execute in a single cycle. The 12-bit ADC can be triggered synchronously to the PWM module for precise current-sampling in motor drives, while the dedicated QEI (Quadrature Encoder Interface) accepts encoder signals directly. The result is a single-chip solution for sensored and sensorless BLDC, PMSM and AC induction motor control up to several kW without external DSP or FPGA assistance. Typical applications include industrial motor drives (BLDC, PMSM, ACIM), uninterruptible power supplies (UPS) and power inverters, automotive body and chassis controllers, sensorless fan and pump controllers, and digital audio processing where modest MIPS are sufficient. The extended temperature grade also makes the part suitable for under-hood automotive and harsh industrial environments. When designing with this part, pay particular attention to the supply decoupling network: at 20 MIPS with simultaneous ADC sampling, a minimum of 10 uF bulk plus 0.1 uF high-frequency ceramic capacitors on each AVDD/VDD pair is recommended. Designers should also leave room for the oscillator layout, since crystal mode operation is sensitive to stray capacitance and the PLL requires a clean input reference for stable motor-control loop timing. This page synthesizes distributor pricing, drop-in same-family alternatives, and practical design notes not found in the manufacturer datasheet alone, helping engineers and buyers evaluate the DSPIC30F5015-20E/PT for both new designs and field replacements.

견적 요청 문의하기
DSPIC30F5015-30I/PT - 30 MIPS 16-bit DSC, 66KB Flash | Microchip
DSPIC30F5015-30I/PT

DSPIC30F5015-30I/PT - 30 MIPS 16-bit DSC, 66KB Flash | Microchip

The Microchip Technology DSPIC30F5015-30I/PT is a 16-bit Digital Signal Controller (DSC) operating up to 30 MIPS (40 MHz maximum CPU clock) with 66 KB of Flash program memory and 2 KB of RAM, housed in a 64-pin TQFP (PT) package. It integrates a high-performance DSP engine with a single-cycle 16-bit ALU and a 40-bit barrel shifter onto a 16-bit modified Harvard MCU core, enabling deterministic motor-control and signal-processing throughput in a single chip. A Digital Signal Controller (DSC) is a class of embedded processor that combines a microcontroller (MCU) with a dedicated Digital Signal Processor (DSP) engine on the same silicon die. Within the broader semiconductor taxonomy, a DSC sits between a microcontroller and a full DSP: MCU -> DSC -> DSP -> embedded processor -> semiconductor. DSCs target applications that need deterministic real-time control (PWM, timers, ADC sampling) plus on-chip DSP math (IIR/FIR filters, FFTs, motor vector control), and the dsPIC30F family specifically targets 5 V-tolerant industrial designs that older 3.3 V parts cannot serve. Key differentiating specifications include 8 KB of auxiliary Flash, 1024 bytes of EEPROM, a 12-bit ADC with 16 channels and 200 ksps throughput, five 16-bit timers, four PWM channels with duty-cycle resolution suitable for motor drive, two UART, two SPI, one I2C, and one CAN module. The device supports 3.0 V to 5.5 V single-supply operation, ideal for industrial 5 V rails. Architecture-wise, the part uses a 24-bit instruction word with 16-bit data paths, separate program and data buses for single-cycle MAC, and an interrupt controller with 5-cycle latency. The 64-pin TQFP supports a wide operating temperature range of -40 °C to +85 °C (industrial grade), with Flash endurance of 10,000 erase/write cycles minimum. Typical applications include brushless DC (BLDC) and AC induction motor control, uninterruptible power supplies (UPS), power conversion inverters, automotive sensor conditioning, and industrial sensorless motor drives. The combination of deterministic PWM, fast ADC, and on-chip DSP math removes the need for an external DSP coprocessor. When designing with this part, allocate the external 8 MHz to 10 MHz primary oscillator budget carefully because the 40 MHz system clock is derived from a PLL multiplier. Verify that the 5 V-tolerant I/O pin count matches your isolation interface, and remember that 66 KB of Flash includes both code and auxiliary storage. This page synthesizes distributor pricing, drop-in alternatives, and practical design notes not found in the manufacturer datasheet alone.

견적 요청 문의하기
DSPIC30F5015T-20I/PT - 16-Bit 20MIPS 66KB Flash DSC | Microchip
DSPIC30F5015T-20I/PT

DSPIC30F5015T-20I/PT - 16-Bit 20MIPS 66KB Flash DSC | Microchip

The Microchip Technology DSPIC30F5015T-20I/PT is a 16-bit dsPIC30F Digital Signal Controller (DSC) that combines a high-performance DSP engine with a microcontroller (MCU) architecture, delivering up to 20 MIPS of processing throughput from a 64-pin TQFP (10x10 mm) surface-mount package. The device integrates 66 KB (22K x 24) of Flash program memory, 2 KB of SRAM data memory, and 1 KB of EEPROM, making it well-suited for mixed control-and-signal-processing embedded applications. The 'T' suffix indicates Tape and Reel packaging, while 'I' designates the industrial -40C to +85C operating temperature range. A Digital Signal Controller is a class of embedded processor that merges a deterministic microcontroller core with dedicated DSP math resources (single-cycle MAC, barrel shifter, multiple operand fetch). The dsPIC30F family specifically targets motor control, power conversion, and sensor conditioning where closed-loop PID math, Clarke/Park transforms, and high-frequency PWM must coexist with serial communication stacks. As a member of the broader DSC hierarchy (DSC -> microcontroller -> embedded processor -> semiconductor), it occupies a niche between classic 8/16-bit MCUs and 32-bit ARM Cortex parts. Key features include a modified Harvard architecture with separate program and data buses, hardware multiply-accumulate (MAC) supporting fractional and integer math, a 10/12-bit ADC, multiple PWM modules, and communication peripherals including CAN, I2C, SPI, and UART/USART. The integrated motor-control PWM supports complementary outputs with programmable dead time, ideal for 3-phase inverter drives. The 20 MIPS throughput at the rated instruction rate of 20 MHz (4 MHz internal oscillator with 4x PLL) provides adequate headroom for field-oriented control loops at typical PWM frequencies. Typical applications include BLDC and PMSM motor drives, industrial servo controllers, sensorless fan/pump controllers, power-factor-corrected AC/DC converters, and automotive body/auxiliary ECUs. The wide operating voltage range (2.5 V to 5.5 V) and industrial temperature grade allow deployment in factory-floor and automotive under-hood environments. When designing with this DSC, allocate the 66 KB Flash carefully because library code (motor-control math, communication stacks) can quickly consume program space. Plan the 2 KB SRAM for the DSP scratch buffers and Modbus/CAN message queues, and use the 1 KB EEPROM only for non-volatile calibration constants to maximize write-cycle endurance. This page synthesizes verified distributor stock data, parametric alternatives, and engineering design notes that go beyond the manufacturer datasheet summary.

견적 요청 문의하기
DSPIC30F5015T-30I/PT - 16-Bit 30MIPS DSC 66KB Flash 64-TQFP
DSPIC30F5015T-30I/PT

DSPIC30F5015T-30I/PT - 16-Bit 30MIPS DSC 66KB Flash 64-TQFP

The Microchip Technology DSPIC30F5015T-30I/PT is a high-performance 16-bit Digital Signal Controller (DSC) that combines the control capability of a microcontroller with the compute throughput of a DSP, delivering up to 30 MIPS at 30 MHz while executing from 66 KB (22K x 24-bit) of on-chip Flash program memory in a 64-pin TQFP (10x10 mm) surface-mount package. A Digital Signal Controller is a hybrid processor category that integrates a modified Harvard CPU with single-cycle MAC (multiply-accumulate) and barrel-shifter DSP peripherals, sitting in the hierarchy between a microcontroller (MCU) and a digital signal processor (DSP). The dsPIC30F family specifically targets real-time closed-loop control applications - motor control, switch-mode power supply (SMPS) control, and sensor conditioning - where deterministic interrupt latency and on-chip DSP bandwidth matter more than raw application-processor performance. Key features of the DSPIC30F5015T-30I/PT include a 30 MIPS modified Harvard core with single-cycle hardware MAC, 66 KB Flash program memory, 2 KB SRAM data memory, an 8-channel 10-bit A/D converter rated up to 500 ksps, motor-control PWM modules with edge-aligned and center-aligned modes, quadrature encoder interface (QEI), UART/SPI/I2C/CAN communication peripherals, and an industrial -40C to +85C operating temperature range (denoted by the "I" suffix). The 64-TQFP footprint is shared with the dsPIC30F5011 and migration options into the dsPIC33F and PIC24 families. Architecturally, the device uses a 24-bit instruction word with 16-bit data paths, enabling C-efficient DSP code while preserving deterministic interrupt response. The DSP engine provides fractional (Q15) and integer MAC operations in a single cycle, allowing FIR/IIR filter loops and PID control loops to run 10-20x faster than an equivalent MCU-only implementation. The on-chip peripherals are grouped for motor-control subsystems, including the PWM with complementary outputs and programmable dead time, QEI for position feedback, and 10-bit ADC with simultaneous sampling. Typical applications include brushless DC (BLDC) and permanent-magnet synchronous motor (PMSM) field-oriented control (FOC) drives, switched-mode power supply (SMPS) digital control loops, uninterruptible power supplies (UPS), automotive sensor interfacing, and industrial automation servo drives. The 30 MIPS budget is sufficient for sensorless FOC loops at switching frequencies up to 20 kHz with a 10 kHz control rate. When designing with this device, ensure the input clock and PLL configuration deliver the 30 MIPS target without violating the 2.5V-5.5V VDD range, and add a 10uF bulk + 0.1uF decoupling pair adjacent to every VDD/VSS pin pair. For new designs consider migrating to the dsPIC33F family (or PIC32MK) for higher MIPS, more RAM, and better tooling support. This page synthesizes distributor pricing, drop-in alternates, and practical design notes that go beyond what is in the manufacturer datasheet alone - useful for engineers comparing lifecycle, package compatibility, and pricing in 2026.

견적 요청 문의하기
DSPIC30F5016-20E/PT - 16-bit 66KB Flash DSC | 80-TQFP | Microchip
DSPIC30F5016-20E/PT

DSPIC30F5016-20E/PT - 16-bit 66KB Flash DSC | 80-TQFP | Microchip

The Microchip DSPIC30F5016-20E/PT is a 16-bit Digital Signal Controller (DSC) from the dsPIC30F motor-control family, integrating a high-performance DSP engine with a microcontroller in a single 80-pin TQFP (12x12 mm) package. It delivers up to 20 MIPS of throughput from a 40 MHz internal clock, packs 66 KB of on-chip Flash program memory and 8 KB of RAM, and operates from a 3.0 V to 5.5 V supply. A Digital Signal Controller (DSC) is a class of embedded processor that fuses a modified Harvard DSP engine with a microcontroller core on the same die. The dsPIC30F5016 belongs to the broader hierarchy of microcontrollers and digital signal processors, purpose-built for closed-loop control and high-speed signal conditioning where neither a pure MCU nor a standalone DSP is sufficient. Key features include a 16-bit architecture with single-cycle 16x16 MAC, dedicated motor-control PWM modules, a 12-bit ADC with up to 16 channels, encoder interface hardware, and CAN/I2C/SPI/UART peripherals. The 80-pin TQFP-EP package offers 68 digital I/O lines plus analog inputs, and the 40 MHz core is paired with deterministic interrupt latency suitable for field-oriented control of three-phase motors. Architecturally, the device combines a 24-bit instruction word DSP core with 16-bit data paths and dual data-access RAM, providing the MAC bandwidth required for Park/Clark transforms, PI loops, and space-vector modulation without offloading to a companion DSP. The enhanced Flash supports self-programming, and the on-chip EEPROM emulation simplifies parameter storage in field-deployed drives. Typical applications include three-phase AC induction and PMSM motor drives, BLDC fan and pump controllers, industrial servo amplifiers, power-conversion control loops, and automotive sensor conditioning. The integrated quadrature encoder interface and PWM/ADC synchronization blocks are tailored to digital current and torque loops in FOC implementations. When designing with this part, pay attention to the maximum 20 MIPS performance envelope (use dsPIC30F5016-30I for 30 MIPS), the 3.0-5.5 V supply window (no 1.8 V operation), and the larger 12x12 mm TQFP footprint that simplifies four-layer motor-drive PCB layout. The page below synthesizes distributor pricing, drop-in alternatives, and design notes not found in the manufacturer datasheet.

견적 요청 문의하기
DSPIC30F5016-20I/PT - 20 MIPS, 66KB Flash Motor Control DSC
DSPIC30F5016-20I/PT

DSPIC30F5016-20I/PT - 20 MIPS, 66KB Flash Motor Control DSC

The Microchip Technology DSPIC30F5016-20I/PT is a 16-bit Digital Signal Controller (DSC) from the dsPIC30F Motor Control family, integrating a high-performance DSP engine with a microcontroller core in a single 80-pin TQFP (12x12 mm) package. The device executes up to 20 MIPS at 5V and features 66 KB (22K x 24) of Flash program memory, 2 KB (1K x 16) of SRAM, and 1 KB of on-chip EEPROM. According to the Microchip data sheet DS-70149E, it provides a 16-channel, 10-bit Analog-to-Digital Converter with 500 ksps throughput and dual analog sample-and-hold, plus dedicated motor-control PWM with up to 8 outputs and complementary or independent mode operation. A Digital Signal Controller is a hybrid architecture merging a DSP's MAC unit and barrel shifter with an MCU's deterministic interrupt-driven core, enabling single-chip implementation of computationally intensive closed-loop algorithms such as sensorless field-oriented control (FOC), digital filtering, and power-factor correction. Within the broader semiconductor taxonomy, the dsPIC30F sits below 32-bit DSC families like dsPIC33F and PIC32MK but above classic 8-bit PIC MCUs in computational throughput, making it a long-established workhorse for cost-sensitive real-time control. Key features include a high-performance modified Harvard architecture with separate program and data buses, a 16-bit DSP engine with a 17 x 17-bit multiplier and 40-bit accumulator, a CAN 2.0B module, I2C, SPI, and UART communication peripherals, and a 16-bit timer/counter block. An industrial-grade operating temperature range of -40C to +85C supports factory-floor deployment. The integrated QEI module simplifies encoder feedback for sensored drives, and the dedicated Motor Control PWM supports edge-aligned, center-aligned, and multi-mode operation for IGBT/MOSFET inverter stages. Typical applications include 3-phase AC induction motor and BLDC/PMSM variable-frequency drives, switched-mode power supplies with digital power control, automotive body electronics (HVAC blowers, water pumps, fans), industrial servo control, and uninterruptible power systems (UPS). The -20 speed grade delivers 20 MIPS from a 5V supply, while the device also operates down to 2.5V at reduced speed. Compared with discrete DSP+MCU two-chip solutions, the dsPIC30F5016 collapses BOM cost, PCB area, and software partitioning into a single validated firmware environment supported by Microchip's MPLAB X toolchain and motor-control libraries. Designers should budget PCB area for the 80-pin TQFP land pattern (12x12 mm body, 0.5 mm pitch) and provision decoupling per the Microchip application note guidelines. The dsPIC30F family is mature and supported by extensive reference designs, including Microchip's sensorless FOC demo code, which is a meaningful advantage versus older, end-of-life motor-control DSPs from competing vendors. This page synthesizes distributor pricing, drop-in alternatives within the dsPIC30F family, and design notes not found on the manufacturer data sheet.

견적 요청 문의하기
DSPIC30F5016-30I/PT - 16-bit DSC, 30 MIPS, 66 KB Flash | Microchip
DSPIC30F5016-30I/PT

DSPIC30F5016-30I/PT - 16-bit DSC, 30 MIPS, 66 KB Flash | Microchip

The Microchip Technology DSPIC30F5016-30I/PT is a 16-bit Digital Signal Controller (DSC) from the dsPIC30F Motor Control family, delivering 30 MIPS at a 40 MHz oscillator in an 80-pin TQFP (12x12 mm) package. It integrates 66 KB of program Flash (22K x 24-bit words), 4 KB of RAM, and 1 KB of EEPROM with 52 digital I/O pins. A Digital Signal Controller (DSC) is a hybrid microcontroller-DSP architecture that combines a deterministic MCU instruction set with a single-cycle DSP engine (MAC, barrel shifter). This category sits in the broader hierarchy: DSC -> microcontroller -> embedded processor -> semiconductor IC, and is commonly used where both control-loop determinism and signal-processing throughput are required in the same device. Key features include a 6-channel PWM module with up to 16-bit resolution for three-phase motor control, a 12-bit Analog-to-Digital Converter (ADC) with up to 16 channels and 200 ksps conversion rate, three 16-bit timers, two UART, two SPI, and one I2C interface. The dsPIC30F5016 also provides a built-in CAN 2.0B peripheral for industrial networking. Architecturally, the device uses a Harvard bus with separate program and data paths, a hardware DSP engine supporting fractional and integer math, and a 5V-tolerant I/O structure optimized for industrial environments. The CPU executes most instructions in one cycle, with DSP instructions such as MAC executing in a single cycle as well. Typical applications include three-phase AC induction and BLDC motor drives, sensorless motor control, switched-mode power supplies with digital control loops, and industrial automation controllers. Automotive uses (sensorless fans, electric pumps) are supported by the industrial temperature grade. When designing with this part, note the 5V operation window (2.5-5.5V), the requirement for an external crystal or clock source for many configurations, and the migration path to the dsPIC33F and PIC24 families for newer designs.

견적 요청 문의하기
DSPIC30F5016T-20E/PT - dsPIC30F 20MIPS 66KB Flash DSC | Microchip
DSPIC30F5016T-20E/PT

DSPIC30F5016T-20E/PT - dsPIC30F 20MIPS 66KB Flash DSC | Microchip

The Microchip DSPIC30F5016T-20E/PT is a 16-bit Digital Signal Controller (DSC) from the dsPIC30F family, delivering 20 MIPS of computational throughput at a 40 MHz clock speed in an 80-pin TQFP (12x12 mm) package. It integrates 66 KB of Flash program memory (22K x 24), 2 KB of RAM, and 1 KB of EEPROM, while exposing 60 general-purpose I/O pins for peripheral expansion and system interconnect. A Digital Signal Controller (DSC) is a hybrid class of microcontroller that combines a standard MCU instruction set with a dedicated DSP engine for single-cycle MAC operations. Within the broader taxonomy, a DSC bridges microcontroller -> microcontroller with DSP -> digital signal controller -> embedded processor -> semiconductor. The dsPIC30F5016 specifically targets motor control, digital power conversion, and real-time sensor processing applications where deterministic math throughput is critical. Key features include a 16-bit modified Harvard architecture with DSP dual-operand fetch, a 12-bit ADC with up to 16 channels and 200 ksps conversion rate, motor-control PWM with up to 8 outputs, and integrated communications peripherals: CAN, I2C, SPI, and UART/USART. The device operates from a 4.5 V to 5.5 V supply across the extended -40 C to +125 C industrial temperature range and includes 5 input capture and 5 output compare modules for precise event timing. The DSP engine executes a 17 x 17-bit signed fractional or integer multiply in a single cycle with 40-bit accumulator support, enabling real-time closed-loop control loops such as field-oriented control (FOC) for three-phase motors without CPU offloading. The dsPIC30F5016 also incorporates a CRC engine, watchdog timer, and multiple power-saving modes for safety-critical embedded designs. Typical applications include AC induction and BLDC motor drives, digital uninterruptible power supplies (UPS), variable-frequency drives (VFDs), power-factor correction converters, automotive sensor interfaces, and industrial automation controllers. The wide operating voltage and -40 C to +125 C range make it suitable for both factory-floor and automotive underhood deployments. When designing with the DSPIC30F5016T-20E/PT, ensure that the ADC input impedance and acquisition time settings match the source impedance to avoid conversion errors, and place the device on a 4-layer PCB with a solid ground plane to manage switching noise from the PWM outputs. The 'T' suffix denotes tape-and-reel packaging, while the '20E' suffix denotes the 20 MIPS speed grade and extended temperature range.

견적 요청 문의하기
DSPIC30F5016T-30I/PT - 30 MIPS 16-bit DSP MCU 66KB Flash | Microchip
DSPIC30F5016T-30I/PT

DSPIC30F5016T-30I/PT - 30 MIPS 16-bit DSP MCU 66KB Flash | Microchip

The Microchip Technology DSPIC30F5016T-30I/PT is a high-performance 16-bit Digital Signal Controller (DSC) from the dsPIC30F family, delivering 30 MIPS of processing throughput, 66 KB (22K x 24) of program Flash, 4 KB of RAM and 1 KB of EEPROM in an 80-pin TQFP (12x12 mm) package supplied on tape and reel. A Digital Signal Controller (DSC) is a hybrid device that combines the deterministic interrupt response and peripheral set of a microcontroller with the mathematical horsepower of a Digital Signal Processor (DSP). In the broader taxonomy, a DSC belongs to the family of microcontrollers (MCU), which sit under embedded processors, which in turn fall under semiconductors. The dsPIC30F sub-family targets 5V-tolerant motor control and power-conversion designs where many competing DSPs require 3.3V rails or external level shifters. Key features of the DSPIC30F5016T-30I/PT include a modified Harvard architecture with a 24-bit instruction word, single-cycle MAC, 40-bit accumulators, an integrated 10/12-bit ADC with up to 16 channels, motor-control PWM modules, UART/SPI/I2C/CAN peripherals, and a wide 2.5V to 5.5V operating voltage that lets the part communicate directly with 5V analog front-ends. The 80-pin TQFP package exposes up to 68 general-purpose I/O pins, which is unusually high for this class. Architecturally, the device pairs a 16-bit native data path with DSP-friendly extensions (DO and REPEAT loops, fractional arithmetic), enabling closed-loop control loops and digital filtering at update rates suitable for three-phase inverters, UPS systems and audio class-D amplifiers. The on-chip regulator supports both 3.3V and 5V rails, reducing BOM cost. Typical applications include BLDC and PMSM motor drives, uninterruptible power supplies, power-factor correction stages, digital audio class-D amplification, and industrial sensor conditioning. The 5V-tolerant ADC simplifies mixed-signal board design. When designing with this device, budget Flash for both the application code and any motor-control libraries. Code compiled for the -30 speed grade does not run unchanged on the -20 grade, and the I/Os are not 5V-tolerant when the part is running at 3.3V without the internal regulator engaged. This page synthesizes distributor pricing, pin-compatible dsPIC30F variants, and practical design notes not found in the standalone manufacturer datasheet.

견적 요청 문의하기
DSPIC30F6010-20E/PF - 16-bit DSC, 144KB Flash, 40MHz | Microchip
DSPIC30F6010-20E/PF

DSPIC30F6010-20E/PF - 16-bit DSC, 144KB Flash, 40MHz | Microchip

The Microchip DSPIC30F6010-20E/PF is a 16-bit Digital Signal Controller (DSC) that combines a high-performance dsPIC30F CPU with DSP capability and 144KB of on-chip Enhanced Flash program memory, supplied in a 12x12mm 80-pin TQFP package (PF suffix). It is built around a modified Harvard architecture with a 24-bit wide instruction word and operates at up to 30 MIPS (40 MHz oscillator) from a 4.5V to 5.5V supply. The device integrates a 12-bit ADC with up to 16 inputs, multiple 16-bit timers, input capture, output compare/PWM, UART, SPI, I2C, CAN and a 12-bit DAC, providing a single-chip platform for motor control, sensor processing and digital power conversion. A Digital Signal Controller is a hybrid class of MCU that merges a microcontroller's deterministic control peripherals with a DSP engine optimized for high-throughput math operations (MAC, barrel shifter, zero-overhead looping). Within the broader semiconductor taxonomy, the dsPIC30F sits between 8/16-bit MCUs and 32-bit MPUs, sharing the 16-bit data path of the PIC24 family but adding DSP intrinsics. The dsPIC30F6010 specifically belongs to the motor-control and power-conversion branch of the family, where deterministic PWM, fast ADC sampling and integrated DSP filters are essential. Key differentiating features of the DSPIC30F6010-20E/PF include 8KB of SRAM, 4KB of EEPROM emulation in Flash, a 12-bit 200 ksps ADC with up to 16 channels, three 16-bit timers, an 8-channel motor-control PWM module, two CAN 2.0B modules, two UARTs, one SPI, one I2C, and a Real-Time Clock/Calendar. The "20E" speed grade denotes a 40 MHz maximum oscillator / 30 MIPS operation, while the "-40C to +125C" extended temperature grade supports industrial environments. The 80-pin TQFP (PF) package exposes 68 I/O pins for parallel sensor or power-stage interfaces. Architecturally, the device pairs a 16-bit native data path with a 24-bit instruction word and a 16x16-bit hardware MAC with 40-bit accumulator, achieving deterministic single-cycle signal processing suitable for FOC motor control, digital PFC, audio processing and sensor fusion. The dsPIC30F core executes 30 MIPS while sustaining DSP throughput, and the dual-port SRAM architecture allows concurrent DMA-style data movement between peripherals and memory. Code and data spaces are separated for deterministic interrupt latency, and the peripheral set is interconnected via a peripheral bus matrix to minimize CPU overhead in real-time control loops. Typical applications include three-phase AC induction and BLDC/PMSM motor drives, digital switch-mode power supplies (PFC + DC-DC), industrial sensor signal conditioning, automotive body and powertrain ECUs, and embedded audio/voice processing. The device is also widely used in solar micro-inverters and UPS systems, where the integrated CAN and PWM peripherals reduce BOM cost. Reference designs and application notes are available from Microchip to accelerate FOC and PFC development on this exact part number. When designing with the DSPIC30F6010-20E/PF, attention should be paid to the 4.5V-5.5V supply window (it is not a 3.3V part), to decoupling of the AVDD/AVSS analog rails driving the ADC, and to the 30 MIPS budget when scheduling control-loop code. Programming is performed via ICSP on the PGEDx/PGECx pairs, and the device is supported by MPLAB X IDE, MPLAB XC16 compiler and the dsPIC33F/PIC24 migration path for new designs. This page synthesizes distributor pricing, drop-in same-package alternatives and practical design notes that are not aggregated in the manufacturer datasheet alone, helping engineers and buyers quickly evaluate the DSPIC30F6010-20E/PF against compatible options for second-source or migration scenarios.

견적 요청 문의하기
DSPIC30F6010A-20E/PF - 16-bit DSC, 144KB Flash, 80-TQFP
DSPIC30F6010A-20E/PF

DSPIC30F6010A-20E/PF - 16-bit DSC, 144KB Flash, 80-TQFP

The Microchip Technology DSPIC30F6010A-20E/PF is a 16-bit Digital Signal Controller (DSC) in the dsPIC30F Motor Control family, integrating a high-performance DSP engine with an enhanced 16-bit MCU core on a single chip. Housed in an 80-pin TQFP package (14x14 mm), the device delivers 20 MIPS at 3.3V/5V dual supply operation and includes 144 KB of on-chip Flash program memory with 8 KB of RAM. The architecture combines a modified Harvard RISC CPU with a DSP engine that adds single-cycle MAC and barrel shifter operations, enabling real-time motor control and signal-processing tasks in a single deterministic core. A Digital Signal Controller (DSC) bridges the gap between traditional microcontrollers (MCU) and digital signal processors (DSP). Where a standard MCU executes control loops sequentially, a DSC adds hardware single-cycle multiply-accumulate (MAC), barrel shifting, and zero-overhead looping, allowing closed-loop control algorithms (PID, field-oriented control) and signal conditioning (FFT, FIR/IIR filtering) to run within a single interrupt cycle. The dsPIC30F family sits in the broader hierarchy DSC > MCU > microcontroller > embedded processor > semiconductor. Key features of the DSPIC30F6010A include a 12-bit Analog-to-Digital Converter (ADC) with up to 16 input channels and 200 ksps conversion rate, multiple communication peripherals (UART, SPI, I2C, CAN), dedicated motor-control PWM modules with complementary outputs and programmable dead time, and a wide operating temperature range suitable for industrial and automotive-grade deployments. The device also integrates a real-time clock, multiple 16-bit timers, and an Enhanced Flash memory block with self-programming capability for field firmware updates. Technically, the DSPIC30F6010A uses a 24-bit instruction word with separate 16-bit data paths, allowing efficient mixed-precision arithmetic. The DSP engine operates in parallel with the MCU core, sharing the same register file, so DSP and control code can be written in a unified C environment using the Microchip MPLAB XC16 compiler. The instruction pipeline is deterministic, with no cache misses, which is critical for hard real-time control loops. Program memory is configured as 144 KB Flash with 4 KB of dual-partition Flash for live updates. Typical applications include three-phase AC induction and BLDC motor drives, sensorless field-oriented control (FOC) for servo drives, automotive body and powertrain ECUs, uninterruptible power supply (UPS) and inverter controllers, and industrial PLCs. The combination of DSP throughput and MCU peripherals makes the part well suited to any application where control loops and signal processing must coexist on a single deterministic core. When designing with this part, note the 20 MIPS throughput at 3.3V and the dual-voltage supply requirement (VDD = 2.5-5.5V, AVDD tied to VDD). Allocate decoupling capacitors close to each VDD/AVDD pin pair, and ensure the motor-control PWM outputs are routed away from sensitive analog ADC inputs to minimize coupling. This page synthesizes distributor pricing, pin-compatible drop-in alternatives, and practical design notes not found in the manufacturer datasheet, organized for fast engineering and procurement use.

견적 요청 문의하기
DSPIC30F6010A-20E/PT - 20 MIPS 16-bit DSC, 144KB Flash | Microchip
DSPIC30F6010A-20E/PT

DSPIC30F6010A-20E/PT - 20 MIPS 16-bit DSC, 144KB Flash | Microchip

The Microchip Technology DSPIC30F6010A-20E/PT is a 16-bit Digital Signal Controller (DSC) from the dsPIC30F family, integrating DSP compute throughput with MCU simplicity on a single die. The device delivers 20 MIPS at a 20 MHz external oscillator (with an internal 4x PLL) and embeds 144 KB of Enhanced Flash program memory organized as 48K x 24 words, supported by 4 KB of RAM, packaged in an 80-pin TQFP (12x12 mm) surface-mount part with an operating temperature grade of -40C to +125C for the 'E' (industrial) suffix. A Digital Signal Controller sits at the intersection of two product taxonomies: it is a specialized microcontroller (MCU) augmented with DSP-oriented Multiply-Accumulate (MAC), barrel shifter, and dual-data-fetch engine that can sustain 40 single-cycle MACs per second at full clock. Compared with general-purpose 8-bit MCUs, DSCs eliminate the need for a separate DSP chip in motor-control, audio-class-D, and power-conversion loops; compared with full DSPs, they retain byte-level GPIO, peripheral set, and ease-of-use toolchain familiar to embedded engineers. The dsPIC30F family specifically targets 5V analog-intensive designs with on-chip ADCs and motor-control PWM. Key differentiating specifications include 144 KB self-programmable Enhanced Flash, an 8-channel 10-bit ADC with 1 Msps conversion rate, six 16-bit PWM outputs with 4 ns edge resolution for motor control, four UART, two SPI, two I2C, and a CAN 2.0B module for industrial networking. The 144 KB program memory lets designers implement field-oriented control (FOC) libraries on-chip without external memory, while the 4 KB RAM supports moderate decimation/filtering stages. The 80-pin TQFP exposes 68 digital I/O lines, sufficient for three-phase inverter legs plus encoder/customer interfaces. Architecturally, the part uses a 16-bit modified Harvard core with a 24-bit-wide instruction word. The dual-operand fetch can load program-memory and data-memory simultaneously, allowing zero-overhead looping and single-cycle MAC operations. Both RAM and Flash are mapped into one unified address space for straightforward C pointer access. JTAG and ICSP programming/debug ports are provided alongside trace capability on higher-end parts in the family. Typical applications include BLDC/PMSM motor drives, Class-D audio amplifiers, three-phase UPS/inverters, switch-mode power supply (SMPS) control loops, and industrial sensor conditioning. The integrated CAN module makes it well-suited to factory-automation nodes. Wide operating voltage of 2.5V to 5.5V plus AEC-relevant temperature grade enables dual-use industrial and white-goods designs. Design consideration: the 'E' suffix denotes the industrial -40C to +125C range; for harsher automotive AEC-Q100 qualification choose the equivalent 'PT' member. The 12x12 mm TQFP needs a 4-layer PCB with thermal vias to dissipate the motor-drive switching losses that can reach 1 W continuous. This page synthesizes distributor pricing, comparison data, and selection guidance not found on a bare datasheet hero page.

견적 요청 문의하기