마이크로컨트롤러

제품 (18747)

DSPIC30F4012-20I/SO - 16-bit DSC, 48KB Flash, 20MHz | Microchip
DSPIC30F4012-20I/SO

DSPIC30F4012-20I/SO - 16-bit DSC, 48KB Flash, 20MHz | Microchip

The Microchip Technology DSPIC30F4012-20I/SO is a 16-bit Digital Signal Controller (DSC) that combines the computational throughput of a DSP with the simplicity of an MCU, delivering 20 MIPS of performance in a 28-pin SOIC wide (SO) package. It integrates 48 KB of Flash program memory, 2 KB of SRAM data memory, and 1 KB of EEPROM, and operates from 3.0 V to 5.5 V across the industrial -40 C to +85 C range. A Digital Signal Controller is a hybrid semiconductor device that merges microcontroller peripherals and ease-of-use with the high-throughput MAC engine of a digital signal processor. Within the broader semiconductor hierarchy it sits between microcontroller units (MCUs) and digital signal processors (DSPs); Microchip's dsPIC30F family is the canonical implementation of this category, used where firmware-controlled signal conditioning (motor control, power conversion, sensor fusion) is required without external DSP overhead. Key features include 20 I/O pins, integrated CAN, I2C, SPI and UART peripherals for multi-bus industrial networking, a 6-channel 10-bit ADC with 500 ksps throughput, dedicated motor-control PWM peripherals, and on-chip Flash/EEPROM self-programming for in-field firmware updates. The DSP engine delivers single-cycle MAC, zero-overhead looping, and barrel shifting, enabling deterministic control-loop execution. Internally the dsPIC30F4012 uses a Harvard RISC architecture with a 24-bit instruction word, dual 40-bit accumulators, and a 16x16 fractional/integer hardware multiplier, giving it enough headroom for field-oriented control (FOC) of three-phase motors and for digital power-conversion loops. The 20 MIPS sustained throughput translates to a 50 ns instruction cycle, fast enough to sample, compute and update a control loop in a single PWM period. Typical applications include BLDC and PMSM motor control, sensorless fan/pump drives, digital power-factor correction, UPS and inverter control, industrial sensor interfaces, and automotive body/comfort modules. Designers choose the SOIC-28 wide package when board area allows a through-hole-friendly footprint and when cost per unit is the primary driver. When designing with this part, plan the PCB layout so that the analog AVSS/AVDD pair is decoupled separately from the digital supply, route the PWM outputs as impedance-controlled differential pairs where possible, and reserve a VPP/PGD pair for in-circuit debug and Flash programming. These simple choices reduce switching noise coupling into ADC samples and shorten firmware bring-up. This page synthesizes distributor pricing, drop-in alternatives and practical design notes not found in the manufacturer datasheet, giving engineers a faster path from MPN search to qualified BOM.

견적 요청 문의하기
DSPIC30F4012-30I/ML - 16-bit 30MIPS 48KB Flash DSC | Microchip
DSPIC30F4012-30I/ML

DSPIC30F4012-30I/ML - 16-bit 30MIPS 48KB Flash DSC | Microchip

The Microchip Technology DSPIC30F4012-30I/ML is a 16-bit dsPIC30F Digital Signal Controller (DSC) delivering 30 MIPS performance from a 44-pin QFN (8x8 mm) package with 48KB (16K x 24) of on-chip Flash program memory. The device is part of the dsPIC30F Motor Control family and combines a high-performance DSP engine with the peripheral set and simplicity of an MCU. A DSC (Digital Signal Controller) is a hybrid processor architecture that fuses a microcontroller's deterministic interrupt handling and peripheral integration with a digital signal processor's single-cycle MAC (multiply-accumulate) engine and Harvard bus. Within the broader taxonomy, the DSPIC30F4012 sits at: DSC -> 16-bit DSC -> motor-control DSC -> embedded microcontroller -> semiconductor. The 30 MIPS core can sustain single-cycle MAC operations, supporting closed-loop control loops at PWM frequencies up to the tens of kHz typical of field-oriented control (FOC) of three-phase PMSM or BLDC motors. Key features include 2KB SRAM data memory, 1KB EEPROM, a 12-bit ADC with up to 13 input channels and 200 ksps conversion rate, a 6-channel 16-bit Motor Control PWM module with dedicated fault inputs, two UART modules, one SPI, one I2C, two CAN modules, four 16-bit timers, and 20 general-purpose I/O pins. The 44-QFN exposed-pad package provides a thermal resistance suitable for industrial temperature operation over -40C to +85C. Architecturally, the DSPIC30F4012 uses a 24-bit instruction word with separate program and data paths (modified Harvard), 16 working registers, and DSP instructions including zero-overhead loops. Two 40-bit accumulators support fractional 1.15 fixed-point math, and a single-cycle MAC enables real-time transforms such as Park/Clarke and PID loops without CPU saturation. Typical applications include sensorless and sensored BLDC/PMSM motor drives, AC induction motor vector control, power-conversion controllers (UPS, PFC, solar inverter), industrial automation drives, and automotive body-control ECUs. The integrated CAN, dual UART, and PWM make the part well-suited to CAN-connected motor nodes and multi-axis servo systems. When designing with the DSPIC30F4012, ensure the exposed pad is soldered to a sufficient copper area to meet the package's thermal envelope, and place the analog AVdd/AVss pair with clean ground isolation because the 12-bit ADC performance depends heavily on power-rail decoupling. MPLAB X IDE with the XC16 compiler is the canonical firmware toolchain. This page consolidates distributor pricing, same-package drop-in alternatives, and design considerations synthesized from the manufacturer datasheet and authorized distributor listings - context not available from a single source.

견적 요청 문의하기
DSPIC30F4012T-20E/SO - 16-Bit 20 MIPS DSC, 48KB Flash | Microchip
DSPIC30F4012T-20E/SO

DSPIC30F4012T-20E/SO - 16-Bit 20 MIPS DSC, 48KB Flash | Microchip

The Microchip Technology DSPIC30F4012T-20E/SO is a 16-bit Digital Signal Controller (DSC) in the dsPIC30F Motor Control family, integrating a high-performance DSP engine with a single-cycle MCU core. The device executes up to 20 MIPS at 20 MHz, provides 48 KB (16K x 24) of Flash program memory, 2 KB (1K x 16) of SRAM data memory, and 1 KB (512 x 16) of EEPROM, all housed in a 28-pin SOIC (SO) wide-body package supplied in Tape & Reel form. A Digital Signal Controller is a hybrid class of embedded processor that combines the deterministic interrupt response and peripheral set of a microcontroller with the single-cycle MAC (multiply-accumulate) engine and dual 40-bit accumulators of a DSP. Within the broader taxonomy, a DSC sits below a full DSP and above a conventional MCU, and the dsPIC30F series specifically targets motor control, power conversion, and sensor-processing applications where both control-loop determinism and signal-processing throughput are required. The DSPIC30F4012T operates from 2.5 V to 5.5 V, supports an extended industrial temperature range, and offers seamless migration paths to the dsPIC33F and PIC24 families. Key features include a 16-bit modified Harvard architecture, 20 MIPS sustained throughput, on-chip 48 KB Flash with self-programmability, dedicated motor-control PWM (6 outputs, complementary mode with dead time), a 12-bit A/D converter with up to 9 channels and 200 ksps throughput, three 16-bit timers, an input capture module, a quadrature encoder interface, UART, SPI, I2C, and CAN 2.0B communications. The integrated DSP engine executes a 16 x 16-bit MAC in one cycle and supports fractional and integer math. The architecture pairs a 24-bit instruction word with a 16-bit data path, enabling C-compiler-friendly operation while still benefiting from DSP-class MAC, barrel shifter, and dual-accumulator resources. Power management includes idle, sleep, and deep-sleep modes with fast wake-up. The CAN 2.0B peripheral, quadrature encoder interface, and dedicated motor-control PWM make the DSPIC30F4012T especially well suited to field-oriented control (FOC) of brushless DC and permanent-magnet synchronous motors. Typical applications include BLDC and PMSM motor drives, sensorless motor control, uninterruptible power supplies (UPS), power-factor-corrected (PFC) converters, solar inverters, industrial fans and pumps, digital UPS control, automotive sensor interfaces, and general-purpose DSP-augmented embedded control. The 5 V operating range is a deliberate fit for industrial and automotive subsystems still designed around legacy 5 V logic. When designing with the DSPIC30F4012T, place the VDD/VSS decoupling pair within 5 mm of each pin pair, use a 10 uF bulk plus 0.1 uF high-frequency ceramic on each supply rail, and reserve the AVDD/AVSS pins for the 12-bit ADC reference domain. If migrating to the dsPIC33F family, double-check that the chosen dsPIC33F retains 5 V tolerance on the ADC inputs required by your analog front-end. This page synthesizes distributor pricing, drop-in same-package alternatives (including Tape & Reel, tube, ML-package, and -20E/-20I temperature-grade variants), and practical design notes not found in a quick datasheet scan.

견적 요청 문의하기
DSPIC30F4012T-20I/SO - 16-bit DSC 48KB Flash 28-SOIC | Microchip
DSPIC30F4012T-20I/SO

DSPIC30F4012T-20I/SO - 16-bit DSC 48KB Flash 28-SOIC | Microchip

The Microchip DSPIC30F4012T-20I/SO is a 16-bit dsPIC30F Digital Signal Controller (DSC) integrating a high-performance DSP engine with an MCU-class peripheral set, packaged in a 28-pin SOIC wide-body (SOIC-28 W) and rated for 20 MIPS operation across the industrial temperature range. A Digital Signal Controller is a class of embedded processor that fuses a microcontroller's deterministic peripheral and interrupt behavior with a DSP's MAC (multiply-accumulate) engine, making it ideal for closed-loop control loops and real-time signal conditioning. The dsPIC30F family specifically targets motor control, power conversion, and sensor processing, sitting in the broader taxonomy as: Digital Signal Controller -> microcontroller -> embedded processor -> semiconductor. Its 16-bit modified Harvard architecture executes one instruction per cycle (plus DSP ops in two cycles) and supports fractional and integer data types natively. Key features include 48KB (16K x 24) of Flash program memory, 2KB of RAM, and 1KB (1K x 8) of EEPROM for non-volatile data storage. The device integrates six 10-bit ADC channels with 1 Msps conversion, a 6-channel PWM module optimized for 3-phase motor control, two UART modules, one SPI, one I2C, and 20 general-purpose I/O pins. The 28-pin SOIC package provides 0.295-inch (7.50 mm) body width with 1.27 mm pin pitch, suitable for hand-soldered prototypes as well as volume SMT production. The dsPIC30F4012 core combines a 24-bit instruction word with 16-bit data paths, allowing efficient C compilation while retaining DSP-style barrel shifter and dual-operand fetch. The wide operating voltage range (2.5V to 5.5V) supports both 3.3V and 5V system designs, simplifying integration into mixed-voltage boards. Built-in JTAG and ICSP debug interfaces enable in-circuit programming and real-time trace through Microchip's MPLAB X IDE. Typical applications include BLDC and PMSM motor drives, sensorless field-oriented control (FOC), uninterruptible power supplies, solar micro-inverters, digital UPS front-ends, and industrial sensor conditioning. The integrated op-amps and 1 Msps ADC also suit it for power-factor correction and active filtering. For designs requiring migrated performance, Microchip offers seamless migration paths to dsPIC33F and PIC24 families in the same 28-pin footprint. When designing with this device, allocate at least one decoupling capacitor pair (100 nF + 10 µF) per VDD/AVDD pin and keep the analog and digital ground returns shorted at a single star point beneath the IC. The 'T' suffix in the part number indicates Tape and Reel packaging, while the 'I' suffix denotes the -40 °C to +85 °C industrial temperature grade. This page synthesizes distributor pricing, drop-in alternatives, and practical design notes not consolidated in the manufacturer datasheet alone. Engineers comparing DSPIC30F4012T-20I/SO against newer dsPIC33F devices should weigh peripheral compatibility against the higher MIPS and DSP throughput offered by the 33F family.

견적 요청 문의하기
DSPIC30F4012T-30I/ML - 16-bit DSC, 30MIPS, 48KB Flash | Microchip
DSPIC30F4012T-30I/ML

DSPIC30F4012T-30I/ML - 16-bit DSC, 30MIPS, 48KB Flash | Microchip

The Microchip Technology DSPIC30F4012T-30I/ML is a 16-bit Digital Signal Controller (DSC) from the dsPIC30F family that combines MCU simplicity with DSP performance, delivering 30 MIPS at 30 MHz core speed and integrating 48KB (16K x 24) of Flash program memory alongside 2KB SRAM and 1KB EEPROM in a 44-pin QFN (8x8 mm) package. This automotive-grade-targeted industrial-temperature variant (T suffix = Tape & Reel, I = -40C to +85C industrial) targets motor control and digital power conversion designs. What is a DSC? A Digital Signal Controller is a hybrid architecture that fuses a modified Harvard RISC CPU with single-cycle MAC DSP engines, deterministic interrupt latency, and rich motor-control peripherals. Within the taxonomy, a DSC sits above a generic microcontroller (MCU) and below a standalone DSP, occupying the power management and motor control niches where deterministic timing plus signal processing is required. dsPIC30F specifically targets 3-phase motor control, PFC, and audio processing. Key features include a 6-channel, 10-bit Analog-to-Digital Converter (ADC) with 1 Msps throughput, a dedicated Motor Control PWM module with up to 8 outputs, a Quadrature Encoder Interface (QEI), plus CAN, I2C, SPI, and UART connectivity. The on-chip DSP engine adds single-cycle 16x16-bit MAC, 40-bit accumulators, and barrel shifter, enabling real-time FFT, FIR/IIR filtering, and field-oriented control loops without offloading to a separate DSP. Typical applications include 3-phase BLDC and PMSM motor drives (FOC with space-vector modulation), sensorless motor control using the ADC and QEI, digital UPS and PFC stages, audio processing front-ends, industrial CAN-connected sensor nodes, and automotive body controllers. The 30 MHz core and 48KB Flash are sized for typical motor-control state machines plus sensor-fusion DSP code. When designing, ensure the supply decoupling network follows Microchip's reference: 10uF bulk plus 0.1uF ceramic near each VDD pin, with the AVDD/VSS analog pair isolated by ferrite. The QFN thermal pad must be soldered to a continuous ground plane for thermal and electrical performance. Programming/debugging is supported via MPLAB ICD 3 or MPLAB REAL ICE through the standard ICSP interface. This page synthesizes distributor pricing, drop-in alternatives, and practical design notes not found in the manufacturer datasheet alone.

견적 요청 문의하기
DSPIC30F4012T-30I/SO - 16-bit 30MIPS DSC, 48KB Flash | Microchip
DSPIC30F4012T-30I/SO

DSPIC30F4012T-30I/SO - 16-bit 30MIPS DSC, 48KB Flash | Microchip

The Microchip Technology DSPIC30F4012T-30I/SO is a 16-bit Digital Signal Controller (DSC) that combines the high performance of a DSP with the simplicity of an MCU, packaged in a 28-pin SOIC (SO) wide-body form factor. It executes up to 30 MIPS, integrates 48KB of Flash program memory organized as 16K x 24 words, and is part of Microchip's dsPIC30F motor-control and embedded-control family. What is a Digital Signal Controller? A DSC is a hybrid architecture that fuses a modified Harvard RISC CPU core with dedicated DSP execution units, enabling single-cycle MAC (multiply-accumulate) operations. DSCs sit hierarchically between general-purpose microcontrollers and full DSP processors, offering deterministic real-time control with high-throughput signal processing in a single chip - ideal for closed-loop motor control, power conversion, and sensor-fusion applications. Key features include a 16-bit data path with single-cycle MAC, 2KB of RAM, 1KB of EEPROM emulation, four 16-bit timers, six PWM channels with duty-cycle control, a 12-bit ADC with up to 200 ksps conversion rate, and industrial-grade peripherals such as I2C, SPI, UART, and CAN. The wide 2.5V to 5.5V operating range allows direct interface to 5V systems. An integrated motor-control PWM module supports complementary outputs with programmable dead-time insertion. Architecturally, the DSPIC30F4012T uses a 24-bit instruction word with separate 16-bit data buses for X and Y memory, allowing dual-operand fetches in a single cycle. This dual-bus design is critical for MAC-intensive DSP loops such as FIR filters, PID control, and Park/Clarke transforms used in field-oriented motor control. Typical applications include BLDC and PMSM motor drives, sensorless fan/pump controllers, uninterruptible power supplies (UPS), digital power converters, and industrial sensor signal conditioning. The dsPIC30F family is widely deployed in appliance motor-control modules, HVAC blowers, and small-format power tools. Design consideration: when migrating from 5V to 3.3V systems, verify all peripheral voltage ratings remain within range, and budget Flash endurance (typically 10K erase/write cycles) against firmware update frequency. This page synthesizes distributor pricing, drop-in alternatives, and practical design notes for the DSPIC30F4012T-30I/SO not found in the manufacturer datasheet alone.

견적 요청 문의하기
DSPIC30F4013-20E/PT - 16-bit DSC, 48KB Flash, 20 MIPS | Microchip
DSPIC30F4013-20E/PT

DSPIC30F4013-20E/PT - 16-bit DSC, 48KB Flash, 20 MIPS | Microchip

The Microchip DSPIC30F4013-20E/PT is a 16-bit Digital Signal Controller (DSC) from the dsPIC30F Motor Control family, delivering up to 20 MIPS of processing performance with a modified Harvard architecture CPU in a 44-pin TQFP package (10x10 mm). It integrates 48 KB of Flash program memory, 4 KB of RAM, and 1 KB of auxiliary Flash for data EEPROM emulation, supporting field-upgradeable motor-control and digital-power firmware. A Digital Signal Controller (DSC) is a hybrid between a microcontroller (MCU) and a digital signal processor (DSP): it retains the deterministic interrupt-driven control of an MCU while adding single-cycle MAC, barrel shifter, and zero-overhead loop hardware borrowed from DSPs. In the broader taxonomy, the dsPIC30F4013 sits under MCU -> 16-bit MCU -> DSC -> motor-control DSC -> semiconductor. This dual DNA makes the part well suited for closed-loop control loops where a CPU alone cannot keep up with the math. Key features include a 20 MIPS core from a 40 MHz external oscillator (with 4x PLL phase options), a 6-channel 10-bit ADC with 1 Msps conversion rate, dedicated motor-control PWM modules with complementary outputs and dead-time control, plus CAN, UART, SPI, and I2C peripherals. The integrated op-amps and comparators on-chip simplify BLDC, PMSM, and PFC front-end designs by reducing external analog components. Industrial-grade -40C to +125C operating range and 2.5 V to 5.5 V supply tolerance support harsh-environment deployment. The dsPIC30F4013 uses a 24-bit instruction word with 16-bit data paths and 23-bit program addressing, allowing direct addressing of up to 4 MB of linear program memory. The deterministic interrupt controller with 5-cycle latency, hardware DO/REPEAT loops, and DSP accumulator with 40-bit-wide result make it suitable for real-time sensorless-FOC and field-weakening algorithms running at 10-20 kHz PWM rates. Typical applications include 3-phase BLDC/PMSM motor drives, sensorless field-oriented control (FOC) of ACIM pumps and fans, digital PFC boost converters, uninterruptible power supplies (UPS), and solar micro-inverter front-ends. The 20 MIPS headroom is sufficient for space-vector modulation plus cascaded PI loops without an external DSP coprocessor. When designing with this device, allocate adequate decoupling (100 nF + 10 uF near VDD/AVDD pins) and route the analog/digital grounds as a star to avoid noise coupling into ADC inputs. The PT suffix indicates the TQFP-44 package - choose this over the PDIP-40 (DSPIC30F4013-20E/P) only when surface-mount manufacturing is acceptable for your assembly line. This page synthesizes distributor pricing, drop-in alternatives, and practical design notes not found in the manufacturer datasheet alone, providing actionable selection guidance for engineers choosing between dsPIC30F variants and competing motor-control MCUs.

견적 요청 문의하기
DSPIC30F4013-20I/ML - 16-Bit 20 MIPS DSC, 48KB Flash | Microchip
DSPIC30F4013-20I/ML

DSPIC30F4013-20I/ML - 16-Bit 20 MIPS DSC, 48KB Flash | Microchip

The Microchip Technology DSPIC30F4013-20I/ML is a 16-bit digital signal controller (DSC) in the dsPIC30F Motor Control family, integrating a 20 MIPS DSP-enhanced CPU with 48 KB of Flash program memory (16K x 24) and 2 KB of RAM in a 44-pin QFN (8x8 mm) package. It combines the ease of use of a microcontroller with the computational throughput of a DSP, making it well suited for closed-loop motor control, digital power conversion, and sensorless BLDC/PMSM applications. A Digital Signal Controller (DSC) is a hybrid class of embedded processor that fuses a microcontroller (MCU) with a digital signal processor (DSP) on a single die. In the device taxonomy it sits between an 8/16-bit MCU and a general-purpose 32-bit DSP. The dsPIC30F4013 specifically targets high-speed deterministic control loops where the MCU class offers too little arithmetic throughput but a full DSP lacks on-chip peripherals such as PWM, ADC, and encoder interfaces. Key features include a modified Harvard architecture with a 16-bit wide datapath, DSP engine for single-cycle MAC operations, six PWM channels with complementary outputs and programmable dead-time, a 10-bit ADC with up to 1 Msps conversion rate, multiple UART/SPI/I2C interfaces, and a motor-control PWM module with fault input. Industrial temperature operation (-40C to +85C) and 4.5V-5.5V supply voltage (with 2.5V-5.5V support at 7.5 MHz) broaden deployment into harsh environments. At the silicon level, the dsPIC30F4013 uses Microchip's 0.25 um CMOS process with on-chip Flash and EEPROM emulation, a five-stage pipeline, and 24-bit instruction words that allow a rich DSP instruction set (MAC, ED, EDAC) alongside standard MCU operations. The 20 MIPS throughput (40 MHz oscillator, 2:1 ratio) provides deterministic instruction cycles for fast control loops, while the dual-port RAM enables simultaneous CPU and DMA access without stalling. Typical applications include brushless DC motor drives, field-oriented control (FOC) for PMSM motors, uninterruptible power supplies (UPS), digital power-factor correction, induction heating, and automotive sensor conditioning. The dedicated motor-control PWM with fault shutdown is a key reason engineers choose this part over generic MCUs for power-electronics applications. Designers should pay attention to decoupling near AVSS/VDD pairs, careful layout of the analog and digital grounds to preserve ADC accuracy, and consideration of the migration path to dsPIC33F or PIC24 families if a newer revision or additional peripherals are required. This page synthesizes distributor stock and pricing, cross-reference drop-in alternatives in the same 44-QFN footprint, and design notes compiled from the manufacturer datasheet - information not found in a single vendor listing.

견적 요청 문의하기
DSPIC30F4013-20I/P - 16-bit Motor Control DSC, 20 MIPS, 40-PDIP | Microchip
DSPIC30F4013-20I/P

DSPIC30F4013-20I/P - 16-bit Motor Control DSC, 20 MIPS, 40-PDIP | Microchip

The Microchip DSPIC30F4013-20I/P is a 16-bit Digital Signal Controller (DSC) from the dsPIC30F Motor Control family, integrating a high-performance DSP engine with a microcontroller-class peripheral set on a single die. The device operates at up to 20 MIPS (40 MHz core clock) and is housed in a 40-pin PDIP (Plastic DIP, 600 mil) through-hole package. It is rated for the industrial temperature range of -40C to +85C. A Digital Signal Controller (DSC) is a hybrid architecture that combines the deterministic interrupt latency and on-chip peripherals of a microcontroller with the single-cycle MAC (multiply-accumulate) engine and DSP-oriented instruction set of a digital signal processor. This category sits in the hierarchy: DSC -> microcontroller -> embedded processor -> semiconductor. DSCs are optimized for closed-loop control loops where analog signals must be sampled, processed, and used to update PWM outputs within microseconds, which is exactly what motor control and power conversion demand. Key features include 48 KB of on-chip Flash program memory, 2 KB of SRAM data memory, and 1 KB of EEPROM. The peripheral set targets motor control: six PWM output channels with complementary or independent modes, a 10-bit A/D converter with up to 13 input channels at 1 Msps, a quadrature encoder interface (QEI), and a 16-bit timer/capture module. An integrated CAN 2.0B controller and UART/SPI/I2C serial ports round out the communication set. The device operates from 3.0 V to 5.5 V on a single supply. The DSP engine provides a 40-bit accumulator, two 40-bit working registers, and single-cycle 16x16 MAC operations, enabling real-time execution of PI controllers, Park/Clarke transforms, and space-vector PWM routines without off-chip DSP support. The 40-pin PDIP form factor makes this variant particularly well suited for breadboard prototypes, educational kits, and low-volume industrial assemblies where through-hole soldering is preferred over QFN reflow. Typical applications include brushless DC (BLDC) motor drives, permanent-magnet synchronous motor (PMSM) field-oriented control, switched-mode power supply (SMPS) digital control loops, and uninterruptible power supply (UPS) inverter controllers. The QEI peripheral simplifies rotor-position feedback and removes the need for an external position decoder. When designing with this device, observe the 40 MHz maximum clock (20 MIPS per the part number suffix -20) and ensure that high-frequency oscillator traces are kept short. The on-chip voltage regulator requires a bulk capacitor on VDD/VSS; consult Microchip documentation for the recommended decoupling network. Migration paths to the dsPIC33F and PIC24 families exist in pin-compatible 44-pin TQFP variants for designs that later need higher MIPS or more memory. This page synthesizes distributor pricing, drop-in alternatives, comparison parameters, and practical design notes that are not consolidated in the manufacturer datasheet alone. Engineers evaluating a DSPIC30F4013-20I/P design-in can use the comparison table and selection guide below to choose between PDIP, QFN, and TQFP variants in the same family without a PCB rework.

견적 요청 문의하기
DSPIC30F4013-20I/PT - 20 MIPS 48KB DSC Motor Control | Microchip
DSPIC30F4013-20I/PT

DSPIC30F4013-20I/PT - 20 MIPS 48KB DSC Motor Control | Microchip

The Microchip DSPIC30F4013-20I/PT is a 16-bit Digital Signal Controller (DSC) delivering 20 MIPS of processing throughput with a dsPIC30F modified Harvard RISC core, housed in a 44-pin TQFP (10x10 mm) package. The device integrates 48 KB of Flash program memory (16K x 24), 2 KB of SRAM, 1 KB of EEPROM, and a rich peripheral set aimed at closed-loop motor control and digital power conversion. What is a Digital Signal Controller? A DSC is a hybrid between a microcontroller (MCU) and a digital signal processor (DSP) that combines deterministic interrupt-driven control with single-cycle MAC throughput. Within the broader taxonomy, the dsPIC30F4013 sits under DSC > microcontroller > embedded processor > semiconductor. This hybrid architecture lets one chip replace a traditional MCU plus external DSP, reducing BOM and PCB area in motor control and power conversion designs. The dsPIC30F family specifically targets applications that benefit from 2.5 to 5.5V wide operating voltage, extremely low standby current, integrated EEPROM, and 5V-tolerant I/O. Key features include a 6-channel 10-bit ADC with 1 Msps conversion rate, six PWM output pairs (12 PWM I/O) with dedicated time base and dead-time control, a quadrature encoder interface (QEI) for position feedback, and three 16-bit timers. The on-chip Motor Control PWM module supports center-aligned, edge-aligned, and multi-mode PWM with hardware fault input, enabling direct drive of MOSFET/IGBT three-phase inverters. Communication peripherals include UART, SPI, and I2C. The DSPIC30F4013 implements an enhanced Harvard architecture with separate 24-bit instruction and 16-bit data paths, achieving 20 MIPS at 4 MIPS/MHz while retaining byte-level arithmetic and bit-manipulation instructions expected by MCU programmers. The 16-bit data path and 40-bit accumulators support single-cycle MAC operations suitable for Park/Clark transforms and PID loops used in field-oriented motor control. Typical applications include three-phase BLDC and PMSM motor drives, sensorless motor control, uninterruptible power supplies (UPS), digital power factor correction (PFC), induction motor control, and switched-mode power supply (SMPS) digital control loops. The integrated QEI and Motor Control PWM make this DSC particularly suited for sensored field-oriented control of three-phase motors in industrial drives, appliance, and HVAC blowers. When designing with this device, plan for a 4 MHz to 20 MHz crystal or external clock, 80 MHz internal oscillator option, and decoupling per the family reference manual. Note that the dsPIC30F family is mature and Microchip recommends migration to dsPIC33F or PIC24 families for new designs in similar 44-pin TQFP packages where longer lifecycle support is required. This page synthesizes distributor pricing, drop-in 44-pin TQFP alternatives, and practical motor-control design notes not aggregated on any single manufacturer or distributor page.

견적 요청 문의하기
DSPIC30F4013-30I/ML - 16-bit DSC 30MIPs 48KB Flash | Microchip
DSPIC30F4013-30I/ML

DSPIC30F4013-30I/ML - 16-bit DSC 30MIPs 48KB Flash | Microchip

The Microchip DSPIC30F4013-30I/ML is a 16-bit Digital Signal Controller (DSC) in the dsPIC30F family that delivers up to 30 MIPS of processing performance from a modified Harvard architecture with a 16-bit data path and 24-bit instruction word. The device integrates 48 KB of on-chip Flash program memory (16K x 24 words) and operates from a 3.0 V to 5.5 V supply, packaged in a 44-pin QFN (ML) with an 8 x 8 mm body and 0.65 mm terminal pitch. The "30I" suffix denotes the 30 MIPS performance grade and the -40 °C to +85 °C industrial temperature range, while "/ML" specifies the lead-free QFN-44 surface-mount package. What is a Digital Signal Controller? A DSC sits between a microcontroller (MCU) and a full digital signal processor (DSP): it executes DSP-grade MAC operations and bit-reversed addressing for fast Fourier transforms, while still running a deterministic real-time control loop on the same chip. The dsPIC30F is the original DSC family from Microchip and targets motor control, switched-mode power supply (SMPS) control, and sensor conditioning, where one core handles both analog sampling and high-speed control math. In the broader taxonomy, a DSC is a microcontroller with a DSP engine -> microcontroller -> embedded processor -> semiconductor device. Key features include a 6-channel, 10-bit ADC with 500 ksps conversion rate, dedicated motor-control PWM modules with up to 8 PWM outputs and complementary mode, a quadrature encoder interface (QEI), an input capture module, and three 16-bit timer/counters. Communication peripherals comprise UART, SPI, and I2C, plus a CAN 2.0B module for industrial networking. The CPU core uses a 16-bit native data path with a 24-bit instruction word, providing up to 30 MIPS throughput while maintaining deterministic interrupt response for control loops. The device is fabricated in CMOS process technology and incorporates 2 KB of RAM plus 1 KB of EEPROM data memory, supporting in-application self-programming and nonvolatile parameter storage. Typical applications include brushless DC (BLDC) motor drives, permanent-magnet synchronous motor (PMSM) field-oriented control (FOC), uninterruptible power supplies (UPS), power factor correction (PFC) stages, and industrial sensor interfaces. The /ML package suits compact, high-density PCB layouts where thermal dissipation through the exposed pad is acceptable. When designing with the DSPIC30F4013-30I/ML, place decoupling capacitors close to the VDD/VSS pairs and tie the exposed thermal pad of the QFN-44 to a ground plane for thermal and electrical performance. The dsPIC30F is supported by the MPLAB X IDE and the MPLAB XC16 C compiler with a free optimization level, and the MotorBench Development Tool and dsPICDEM motor-control starter kits shorten development time. This page synthesizes distributor pricing, drop-in alternatives in the QFN-44 footprint, and practical design notes not found in the manufacturer datasheet.

견적 요청 문의하기
DSPIC30F4013T-20E/ML - 16-bit DSC, 48KB Flash, 44-QFN | Microchip
DSPIC30F4013T-20E/ML

DSPIC30F4013T-20E/ML - 16-bit DSC, 48KB Flash, 44-QFN | Microchip

The Microchip Technology DSPIC30F4013T-20E/ML is a 16-bit Digital Signal Controller (DSC) from the dsPIC30F motor-control family, integrating a 20 MIPS dsPIC30F core with 48KB (16K x 24) of Flash program memory, 2KB of RAM, and 1KB of EEPROM in a 44-pin QFN (8x8 mm) package with exposed thermal pad. The device operates from 3.0V to 5.5V, supports an internal oscillator, and integrates a dedicated motor-control PWM module, a 10/12-bit ADC, and four fault inputs, making it purpose-built for variable-frequency motor drives and digital power conversion. A Digital Signal Controller is a hybrid between a microcontroller and a DSP, sitting in the hierarchy DSC -> microcontroller -> embedded processor -> semiconductor. The dsPIC30F family extends standard MCU architecture with a modified Harvard bus, hardware MAC/DSP engine, and dual-operand fetch, enabling deterministic single-cycle multiply-accumulate operations and zero-overhead loops while preserving the deterministic interrupt model of a traditional MCU. This makes dsPIC30F devices the canonical choice for motor control and power-electronics firmware, where both control-loop determinism and signal-processing throughput are required. Key features of the DSPIC30F4013 include a 6-channel 10-bit ADC with 500 ksps throughput, a 6-channel 16-bit motor-control PWM with complementary outputs and programmable dead time, a Quadrature Encoder Interface (QEI) for sensored BLDC/PMSM feedback, a CAN 2.0B module, plus I2C, SPI, and UART peripherals. The 30F core executes most instructions in one clock cycle and supports fractional and integer saturation logic, simplifying digital filter and PID implementations. The 44-pin QFN exposed-pad package lowers thermal resistance for sustained PWM operation. Typical applications include 3-phase induction motor drives, BLDC/PMSM sensored and sensorless controllers, uninterruptible power supplies (UPS), power-factor correction stages, and digital audio class-D amplification. The built-in PWM with fault inputs also suits welding inverters and solar inverters that require hardware-level shoot-through protection. When designing with this part, allocate adequate copper area under the exposed thermal pad; sustained PWM switching at full load creates significant thermal load. Use Microchip's MPLAB X IDE with the XC16 compiler and dsPIC30F peripheral libraries to accelerate development. For legacy inventory and lifecycle management, the DSPIC30F4013T-20E/ML offers Microchip's seamless migration path to dsPIC33F and PIC24 devices in similar packages, protecting firmware investment across product revisions. This page consolidates pricing, drop-in alternatives, and design guidance not found in the bare datasheet.

견적 요청 문의하기
DSPIC30F4013T-20I/ML - 20 MIPS 16-bit DSC | 48KB Flash | Microchip
DSPIC30F4013T-20I/ML

DSPIC30F4013T-20I/ML - 20 MIPS 16-bit DSC | 48KB Flash | Microchip

The Microchip DSPIC30F4013T-20I/ML is a 16-bit Digital Signal Controller (DSC) from the dsPIC30F family, featuring a 20 MIPS modified Harvard RISC engine with DSP enhancements, 48 KB (16K x 24) of on-chip Flash program memory and 2 KB of RAM, housed in a 44-pin QFN (8x8 mm) package with industrial -40C to +85C temperature rating. The 'T' suffix denotes Tape & Reel packaging. A digital signal controller (DSC) is a hybrid device that combines a microcontroller's deterministic control peripherals with a digital signal processor's (DSP) computational throughput for closed-loop motor control, power conversion, and sensor processing. Within the broader taxonomy, the dsPIC30F sits at the intersection of microcontrollers and DSPs, enabling single-chip implementations that previously required a dedicated MCU plus a DSP. The 20 MIPS core delivers single-cycle 16x16 MAC operations, sufficient for field-oriented control (FOC) of three-phase motors and digital power conversion at switching frequencies up to ~50 kHz. Key features include 13 channels of 12-bit Analog-to-Digital conversion (up to 200 ksps), one 16-bit timer/capture input and one 16-bit timer/PWM output pair, plus a dedicated Motor Control PWM module with up to six PWM outputs and complementary mode. Communication peripherals include one UART/USART, one I2C, one SPI, and one CAN module (CAN 2.0B active). The 44-QFN (ML) package offers an exposed thermal pad with low thermal resistance suitable for power conversion applications. The device operates from 3.0 V to 5.5 V supply and is supported by the MPLAB X IDE and MPLAB XC16 compiler. It targets motor control, sensorless BLDC, AC induction drives, and digital PFC/PSU applications. According to Microchip datasheet DS70138G, the 16-bit DSP engine enables accurate math for control loops while the integrated peripherals reduce BOM cost. When designing with this device, ensure the supply decoupling follows the 100 nF + bulk capacitor arrangement specified in the datasheet and that the exposed pad is soldered for proper thermal dissipation. The CAN bus signals require external transceivers; the dsPIC30F4013 implements only the protocol controller.

견적 요청 문의하기
DSPIC30F4013T-20I/PT - 16-bit DSC, 48KB Flash, 20 MIPS | Microchip
DSPIC30F4013T-20I/PT

DSPIC30F4013T-20I/PT - 16-bit DSC, 48KB Flash, 20 MIPS | Microchip

The Microchip Technology DSPIC30F4013T-20I/PT is a 16-bit Digital Signal Controller (DSC) that fuses a high-performance dsPIC30F DSP engine with a microcontroller core, delivering up to 20 MIPS at 5V in a 44-pin TQFP (10x10 mm) package. It integrates 48 KB (16K x 24) of Flash program memory, 2 KB of SRAM data memory, and 1 KB of EEPROM, providing ample headroom for motor-control firmware, sensor-fusion routines, and DSP-style signal processing on a single chip. The 16-bit modified Harvard architecture pairs a C-optimized instruction set with dual 40-bit accumulators and a single-cycle MAC, letting the part execute control loops while simultaneously running DSP filter math. A Digital Signal Controller (DSC) sits in the component taxonomy as a hybrid between a microcontroller (MCU) and a digital signal processor (DSP). DSCs add hardware multiply-accumulate (MAC) units and barrel shifters to a deterministic MCU core so the same device can sequence I/O, run a PID loop, and execute FFT or FIR filtering without off-loading to a separate DSP. The dsPIC30F4013 specifically targets motor-control and power-conversion applications where closed-loop torque/speed control, field-oriented control (FOC), and current sampling are all required inside a single 5V-tolerant silicon die. Key features include 20 MIPS sustained throughput (50 ns instruction cycle), six PWM channels with complementary or independent outputs, a 6-channel 12-bit 200 ksps ADC with simultaneous sampling, three 16-bit timers, two UART, one SPI, one I2C, and a CAN 2.0B module. On-chip Motor Control PWM (MCPWM) provides dead-time control and center-aligned PWM, eliminating the need for an external motor-control ASIC. Up to 30 interrupt sources with seven priority levels support deterministic real-time response. The 5V supply range (4.5V-5.5V) and -40C to +85C industrial operating window let the DSPIC30F4013T-20I/PT interface directly with 5V analog front-ends, gate drivers, and 5V CAN transceivers without level shifters. The 44-TQFP package offers a generous 0.8 mm pitch for hand-prototyping while still fitting typical 1-2 oz copper 2-layer boards; theta_JA is approximately 50 C/W with adequate copper, sufficing for motor-drive currents up to a few amps at modest switching frequencies. Typical applications include BLDC and PMSM motor drives, sensorless FOC motor controllers, switched-mode power supplies with digital control loops, industrial automation PLCs, and automotive body controllers using the on-chip CAN interface. The on-chip 12-bit ADC and PWM make it a single-chip solution for low-voltage motor inverters in appliances, fans, and pumps. Designers should size the decoupling network to the switching frequency of the driven load - a 100 nF ceramic plus 10 uF tantalum near VDD is typical, plus a bulk cap on AVdd to keep the ADC reference clean during PWM transitions. The TQFP-44 package pinout is shared across the dsPIC30F4011/4012/4013 family, so firmware can be ported between flash-density variants without board rework. This page synthesizes DigiKey pricing, drop-in package-compatible alternatives, application guidance, and design notes not consolidated on the manufacturer datasheet - enabling faster component selection and BOM validation.

견적 요청 문의하기
DSPIC30F5011-20E/PT - 20 MIPS 16-bit DSC, 66KB Flash | Microchip
DSPIC30F5011-20E/PT

DSPIC30F5011-20E/PT - 20 MIPS 16-bit DSC, 66KB Flash | Microchip

The Microchip DSPIC30F5011-20E/PT is a 20 MIPS, 16-bit Digital Signal Controller (DSC) integrating DSP functionality into a high-performance 16-bit MCU architecture, with 66 KB of on-chip Flash program memory, housed in a 64-pin TQFP (10x10 mm) package. It is a member of the dsPIC30F general-purpose family, designed for seamless migration to dsPIC33F and PIC24 devices in similar packages. A Digital Signal Controller (DSC) is a hybrid MCU that combines a traditional microcontroller's peripheral set, deterministic interrupt handling, and ease of use with a DSP engine capable of single-cycle MAC operations. The dsPIC30F5011 specifically belongs to the broader hierarchy of microcontrollers -> 16-bit MCU/DSC -> digital signal controllers -> embedded control solutions, and is engineered for real-time closed-loop control, motor drive, and signal-processing tasks where an 8-bit MCU is too slow and a dedicated DSP is overkill. Key differentiating features include 4 KB of SRAM, a 16-bit timer/counter module, multiple communication peripherals, a 10-bit or 12-bit ADC option depending on family member, 20 MIPS sustained throughput at 20 MHz oscillator, and an extended temperature grade of -40C to +125C for industrial and automotive under-hood applications. The device operates across 2.5V to 5.5V (3.3V/5V tolerant I/O) and includes robust peripherals suited to power-conversion and motor-control loops. At the architecture level, the dsPIC30F5011 uses a Harvard-style modified RISC core with a 24-bit instruction word, dual data paths (X and Y) for the DSP engine, and zero-overhead looping. The DSP engine adds a 40-bit accumulator, barrel shifter, and single-cycle 16x16 -> 40-bit MAC, enabling efficient IIR/FIR filtering, FFT, and Park/Clark transforms without burdening the main CPU. Internal PLL options multiply an external oscillator up to the device's rated MIPS. Typical applications include AC/DC and DC/AC power conversion, BLDC and PMSM motor control, UPS and PFC stages, audio processing front-ends, and industrial sensor conditioning. The wide operating voltage and extended temperature range make it well suited to industrial automation, solar inverters, and appliance motor drives. When designing with this device, ensure decoupling is placed close to each VDD/VSS pair, that the analog and digital grounds are joined at a single point near the on-chip regulator, and that the ADC reference pin is bypassed with a low-ESR ceramic. Verify that the chosen oscillator mode and PLL configuration keep the instruction frequency at or below the device's 20 MIPS rated throughput, as overclocking voids the timing guarantees in the datasheet. This page synthesizes distributor pricing, drop-in same-package alternatives, and practical design notes not found in the manufacturer datasheet, giving an engineer a faster path from selection to layout.

견적 요청 문의하기
DSPIC30F501130IP - 16-bit 30 MIPS DSP MCU, 66KB Flash, 64-TQFP | Microchip
DSPIC30F501130IP

DSPIC30F501130IP - 16-bit 30 MIPS DSP MCU, 66KB Flash, 64-TQFP | Microchip

The Microchip Technology DSPIC30F501130IP is a 16-bit Digital Signal Controller (DSC) from the dsPIC30F family that combines MCU control capability with DSP throughput at 30 MIPS performance. Housed in a 64-pin TQFP (10x10 mm) package, this device integrates 66 KB of Flash program memory (22K x 24), 4 KB of RAM, and 1 KB of EEPROM data storage on-chip, providing a balanced memory profile for embedded signal-processing applications. A Digital Signal Controller (DSC) is a hybrid microcontroller architecture that pairs a traditional MCU-style deterministic control loop with a DSP-grade multiply-accumulate (MAC) engine. In the broader taxonomy, the dsPIC30F sits between a microcontroller and a full DSP - the device is a microcontroller with DSP extensions (single-cycle MAC, dual 40-bit accumulators, barrel shifter) and 16-bit native datapath, optimized for closed-loop control loops with on-chip signal conditioning, such as motor control, power conversion, and sensor-fusion front-ends. Key features of the DSPIC30F501130IP include 30 MIPS operation from a 5V supply, an enhanced 16-bit dsPIC core with single-cycle multiply, dual 40-bit accumulators, and a barrel shifter. The device integrates motor-control PWM, a 12-bit A/D converter with multiple channels, UART/SPI/I2C peripherals, and a 16-bit timer/capture module. The wide 5V-tolerant I/O and operating range make this part well suited to industrial motor control and noisy automotive environments where 3.3V parts can be marginal. Architecturally, the dsPIC30F5011 uses a Harvard memory structure with separate program and data buses, allowing simultaneous access to Flash and RAM for deterministic interrupt response. The DSP engine is implemented as a software-visible set of DSP instructions (MAC, ED, EDAC) layered on top of the standard MIPS-style ALU, giving C compilers automatic DSP acceleration through intrinsic support in MPLAB XC16. Typical applications for the DSPIC30F501130IP include three-phase AC induction motor drives, BLDC/PMSM sensorless field-oriented control (FOC), uninterruptible power supplies (UPS), digital power-conversion PFC stages, automotive sensor conditioning, and industrial process control loops. The combination of 66 KB Flash and 1 KB EEPROM enables in-field firmware upgrades and persistent parameter storage in motor-control designs. When designing with this device, allocate the 4 KB RAM budget between DSP data buffers and stack/heap carefully - FFT and FIR routines consume 1-2 KB of working memory, leaving limited headroom for large RTOS stacks. Consider migrating to dsPIC33F or PIC24 families for higher speed and more memory if headroom is tight.

견적 요청 문의하기
DSPIC30F5011T-30I/PT - 16-bit DSC, 30 MIPS, 66KB Flash | Microchip
DSPIC30F5011T-30I/PT

DSPIC30F5011T-30I/PT - 16-bit DSC, 30 MIPS, 66KB Flash | Microchip

The Microchip Technology DSPIC30F5011T-30I/PT is a high-performance 16-bit Digital Signal Controller (DSC) in the dsPIC30F family, delivering 30 MIPS of processing power from a 5V (2.5V-5.5V) supply in a 64-pin TQFP package supplied on tape and reel. It integrates 66 KB of Flash program memory (22K x 24 words), 4 KB of SRAM data memory, and 1 KB of EEPROM, paired with a 16-channel 12-bit Analog-to-Digital Converter (ADC) and 52 general-purpose I/O pins. What is a Digital Signal Controller? A DSC is a hybrid between a microcontroller (MCU) and a Digital Signal Processor (DSP). The MCU side provides deterministic interrupt response and rich peripherals (timers, UART, SPI, I2C, CAN), while the DSP side adds a single-cycle MAC unit, barrel shifter, and dual 40-bit accumulators so that the core can execute FIR/IIR filters, FFTs, and PID loops in real time. In the system hierarchy, the DSC sits between a generic MCU and a standalone DSP, giving designers a single-chip solution for closed-loop motor control, audio processing, and power conversion that previously required a controller + DSP pair. Key features of the DSPIC30F5011 include a 30 MIPS modified Harvard core, hardware multiply-accumulate for single-cycle DSP operations, a 12-bit 200 ksps ADC with up to 16 channels, motor-control PWM with dedicated fault inputs, and CAN/UART/SPI/I2C communication peripherals. It supports 2.5 V to 5.5 V operation across an industrial -40 C to +85 C temperature range, and includes JTAG/ICSP for in-circuit debug. The architecture uses a 16-bit modified Harvard core with separate program and data buses, plus a DSP engine that lets C-compiler-generated code reach near-assembly efficiency on filter math. A 30 MIPS instruction throughput gives the headroom to run 10 kHz+ control loops while leaving CPU time for housekeeping. Typical applications include BLDC and PMSM motor control (sensored or sensorless), three-phase UPS and power inverter control, audio processing and active noise cancellation, sensor signal conditioning, and industrial automation PLC modules. The integrated motor-control PWM and 12-bit ADC make it a single-chip solution for FOC and trapezoidal commutation. When designing with this part, allocate the 52 GPIO pins across analog inputs, PWM outputs, encoder feedback, and communications. Use the DSP engine for math-heavy loops and reserve the main CPU for state machines and communication stacks. Plan the PCB layout so the analog AVSS/AVDD pair is decoupled separately from the digital supply and routed on a quiet ground island. This page consolidates distributor pricing, same-package drop-in alternatives from the Microchip dsPIC30 family, and PCB-level design notes that are not duplicated in the manufacturer datasheet.

견적 요청 문의하기
DSPIC30F5011T-30I/PTG - 30 MIPS 16-bit DSC, 64KB Flash | Microchip
DSPIC30F5011T-30I/PTG

DSPIC30F5011T-30I/PTG - 30 MIPS 16-bit DSC, 64KB Flash | Microchip

The Microchip Technology DSPIC30F5011T-30I/PTG is a 16-bit Digital Signal Controller (DSC) in the dsPIC30F family, delivering 30 MIPS of computational throughput from a 64-pin TQFP (10x10 mm) surface-mount package on tape and reel. According to the manufacturer datasheet (Microchip document 70116J), it integrates 66KB (22K x 24) of program Flash, 2KB (1K x 16) of data RAM, and 1KB (1K x 8) of EEPROM, with up to 52 programmable digital I/O pins. The 'T' suffix denotes tape-and-reel packaging and 'I' denotes the industrial -40C to +85C operating range. A Digital Signal Controller is a hybrid MCU+DSP that combines a deterministic microcontroller core with single-cycle MAC DSP engine hardware. In the device taxonomy, the dsPIC30F5011 sits below: DSC -> 16-bit DSC -> dsPIC30F family -> dsPIC30F5011/5013 sub-family. It bridges traditional microcontrollers (control-oriented, deterministic interrupt response) and DSPs (high-throughput numeric processing), allowing a single chip to perform closed-loop control and audio/sensor/motor DSP in the same firmware. Key features include a 30 MIPS modified Harvard architecture core, single-cycle 16x16 MAC, on-chip 12-bit ADC (up to 16 channels, 200 ksps), multiple 16-bit timers, UART/SPI/I2C/CAN communication peripherals, a 5V tolerant digital I/O design, and low-power Idle/Doze/Sleep modes. The device operates from 2.5V to 5.5V, providing direct interface to 5V logic without level shifters. Architecturally, the part uses a modified Harvard bus with separate program and data paths and a 24-bit-wide instruction word, which is why program Flash is sized in 24-bit words (22K x 24 = 66KB). The wide path enables DSP-oriented addressing modes and saturating arithmetic, while the MCU-style peripheral set keeps interrupt latency deterministic for real-time control loops. Typical applications include industrial motor control (BLDC, PMSM, ACIM), sensorless field-oriented control (FOC) drives, switched-mode power supply (SMPS) digital control loops, automotive body and sensor modules, audio processing (DSP filters, equalizers, echo cancellation), and medical instrumentation. Designers value the 5V tolerance and rich peripheral mix when targeting industrial 24V/5V systems with mixed analog/digital signal chains. For robust operation, place a 10uF bulk capacitor plus a 100 nF decoupling capacitor as close as possible to each VDD/VSS pair on the PCB. The 64-pin TQFP (PT) footprint is footprint-compatible with the dsPIC30F5013 and several dsPIC33F/PIC24 migration devices listed in Microchip's migration guide, allowing field upgrades without PCB rework. This page synthesizes verified distributor pricing, drop-in alternatives, and practical design notes not found in a single manufacturer page.

견적 요청 문의하기
DSPIC30F5013T-30I/PT - 30 MIPS 16-bit DSC, 66KB Flash | Microchip
DSPIC30F5013T-30I/PT

DSPIC30F5013T-30I/PT - 30 MIPS 16-bit DSC, 66KB Flash | Microchip

The Microchip Technology DSPIC30F5013T-30I/PT is a 16-bit Digital Signal Controller (DSC) from the dsPIC30F general-purpose family, delivering up to 30 MIPS (Million Instructions Per Second) of processing performance with an integrated DSP engine. Housed in an 80-pin TQFP (12x12 mm) package, the device integrates 66 KB (22K x 24-bit) of Flash program memory, 4 KB of RAM, and a rich peripheral set designed for embedded motor control, power conversion, and sensor-processing applications. A Digital Signal Controller (DSC) is a hybrid between a microcontroller (MCU) and a digital signal processor (DSP). The dsPIC30F core combines a deterministic modified Harvard MCU architecture with single-cycle MAC and barrel shifter DSP instructions, enabling real-time control loops and high-throughput signal processing on a single chip. In the broader taxonomy it belongs to: dsPIC -> DSC -> MCU -> embedded processor -> semiconductor IC. The '30I' suffix denotes the -40C to +85C industrial temperature range, and the '/PT' suffix indicates the 80-pin TQFP package supplied on Tape & Reel. Key features include 30 MIPS operation from a 2.5V to 5.5V supply, two 10-bit A/D converters (up to 16 channels), two 10-bit D/A converters, two UART modules, two SPI ports, one I2C bus, two CAN modules, two capture inputs, six PWM/compare outputs, two quadrature encoder interfaces, and a 16-bit timer. The integrated DSP engine supports fractional and integer arithmetic with deterministic interrupt latency, making the device well suited to closed-loop control. Typical applications include three-phase AC induction motor control, sensorless BLDC commutation, UPS and PFC boost power factor correction, digital audio processing, and industrial sensor conditioning. The combination of CAN, PWM, QEI, and high-resolution ADC simplifies designs that previously required a separate DSP and MCU. Compared with the dsPIC30F4011 family, the 5013 offers expanded analog channels and dual CAN modules. When designing with this part, observe the Vdd/Vss decoupling guidance from the manufacturer datasheet (place 0.1 uF ceramics within 5 mm of each supply pin) and respect the 30 MIPS maximum throughput (one instruction cycle = four oscillator periods). For migration to newer silicon, Microchip documents seamless paths to dsPIC33F and PIC24 devices in the same 80-pin TQFP footprint. This page synthesizes distributor pricing, drop-in same-family alternatives, and practical design notes that go beyond the manufacturer datasheet by comparing parametric and packaging trade-offs across the dsPIC30F family.

견적 요청 문의하기
DSPIC30F5015-20E/PT - 16-bit DSC, 66KB Flash, 20 MIPS | Microchip
DSPIC30F5015-20E/PT

DSPIC30F5015-20E/PT - 16-bit DSC, 66KB Flash, 20 MIPS | Microchip

The Microchip DSPIC30F5015-20E/PT is a 16-bit Digital Signal Controller (DSC) that combines the high performance of a DSP with the simplicity of a microcontroller, delivering 20 MIPS throughput in a 64-pin TQFP (10x10 mm) package. The device integrates 66 KB of Flash program memory (22K x 24-bit words), 4 KB of RAM, and 1 KB of EEPROM data memory, plus a 16-channel 12-bit ADC and a dedicated motor-control PWM module. A Digital Signal Controller is a hybrid architecture that pairs a modified Harvard RISC CPU with a DSP engine, enabling single-cycle MAC (multiply-accumulate) operations and barrel shifting. In the broader system hierarchy, the DSC sits between a pure microcontroller (MCU) used for general control tasks and a dedicated DSP used for high-throughput signal processing. This positioning makes the dsPIC30F family ideal for closed-loop control loops where both deterministic interrupt response and real-time math are required on a single chip. Key features of the DSPIC30F5015-20E/PT include a 20 MIPS dsPIC30F core operating from a 4.0V to 5.5V supply (the 'E' suffix indicates the extended industrial temperature range of -40C to +125C), a CAN 2.0B module, two UART/SPI/I2C peripherals, a 16-channel 12-bit 200 ksps ADC, a motor-control PWM with up to 8 output channels and 4 duty-cycle generators, and 5 16-bit timer/counters. The integrated DSP engine handles 16x16-bit fractional or integer MAC in a single instruction cycle, simplifying digital filter, FFT and field-oriented motor-control implementation. The architecture is built on a 5-stage pipeline with a 24-bit wide instruction word, allowing most instructions to execute in a single cycle. The 12-bit ADC can be triggered synchronously to the PWM module for precise current-sampling in motor drives, while the dedicated QEI (Quadrature Encoder Interface) accepts encoder signals directly. The result is a single-chip solution for sensored and sensorless BLDC, PMSM and AC induction motor control up to several kW without external DSP or FPGA assistance. Typical applications include industrial motor drives (BLDC, PMSM, ACIM), uninterruptible power supplies (UPS) and power inverters, automotive body and chassis controllers, sensorless fan and pump controllers, and digital audio processing where modest MIPS are sufficient. The extended temperature grade also makes the part suitable for under-hood automotive and harsh industrial environments. When designing with this part, pay particular attention to the supply decoupling network: at 20 MIPS with simultaneous ADC sampling, a minimum of 10 uF bulk plus 0.1 uF high-frequency ceramic capacitors on each AVDD/VDD pair is recommended. Designers should also leave room for the oscillator layout, since crystal mode operation is sensitive to stray capacitance and the PLL requires a clean input reference for stable motor-control loop timing. This page synthesizes distributor pricing, drop-in same-family alternatives, and practical design notes not found in the manufacturer datasheet alone, helping engineers and buyers evaluate the DSPIC30F5015-20E/PT for both new designs and field replacements.

견적 요청 문의하기
DSPIC30F5015T-20I/PT - 16-Bit 20MIPS 66KB Flash DSC | Microchip
DSPIC30F5015T-20I/PT

DSPIC30F5015T-20I/PT - 16-Bit 20MIPS 66KB Flash DSC | Microchip

The Microchip Technology DSPIC30F5015T-20I/PT is a 16-bit dsPIC30F Digital Signal Controller (DSC) that combines a high-performance DSP engine with a microcontroller (MCU) architecture, delivering up to 20 MIPS of processing throughput from a 64-pin TQFP (10x10 mm) surface-mount package. The device integrates 66 KB (22K x 24) of Flash program memory, 2 KB of SRAM data memory, and 1 KB of EEPROM, making it well-suited for mixed control-and-signal-processing embedded applications. The 'T' suffix indicates Tape and Reel packaging, while 'I' designates the industrial -40C to +85C operating temperature range. A Digital Signal Controller is a class of embedded processor that merges a deterministic microcontroller core with dedicated DSP math resources (single-cycle MAC, barrel shifter, multiple operand fetch). The dsPIC30F family specifically targets motor control, power conversion, and sensor conditioning where closed-loop PID math, Clarke/Park transforms, and high-frequency PWM must coexist with serial communication stacks. As a member of the broader DSC hierarchy (DSC -> microcontroller -> embedded processor -> semiconductor), it occupies a niche between classic 8/16-bit MCUs and 32-bit ARM Cortex parts. Key features include a modified Harvard architecture with separate program and data buses, hardware multiply-accumulate (MAC) supporting fractional and integer math, a 10/12-bit ADC, multiple PWM modules, and communication peripherals including CAN, I2C, SPI, and UART/USART. The integrated motor-control PWM supports complementary outputs with programmable dead time, ideal for 3-phase inverter drives. The 20 MIPS throughput at the rated instruction rate of 20 MHz (4 MHz internal oscillator with 4x PLL) provides adequate headroom for field-oriented control loops at typical PWM frequencies. Typical applications include BLDC and PMSM motor drives, industrial servo controllers, sensorless fan/pump controllers, power-factor-corrected AC/DC converters, and automotive body/auxiliary ECUs. The wide operating voltage range (2.5 V to 5.5 V) and industrial temperature grade allow deployment in factory-floor and automotive under-hood environments. When designing with this DSC, allocate the 66 KB Flash carefully because library code (motor-control math, communication stacks) can quickly consume program space. Plan the 2 KB SRAM for the DSP scratch buffers and Modbus/CAN message queues, and use the 1 KB EEPROM only for non-volatile calibration constants to maximize write-cycle endurance. This page synthesizes verified distributor stock data, parametric alternatives, and engineering design notes that go beyond the manufacturer datasheet summary.

견적 요청 문의하기
DSPIC30F5016-20E/PT - 16-bit 66KB Flash DSC | 80-TQFP | Microchip
DSPIC30F5016-20E/PT

DSPIC30F5016-20E/PT - 16-bit 66KB Flash DSC | 80-TQFP | Microchip

The Microchip DSPIC30F5016-20E/PT is a 16-bit Digital Signal Controller (DSC) from the dsPIC30F motor-control family, integrating a high-performance DSP engine with a microcontroller in a single 80-pin TQFP (12x12 mm) package. It delivers up to 20 MIPS of throughput from a 40 MHz internal clock, packs 66 KB of on-chip Flash program memory and 8 KB of RAM, and operates from a 3.0 V to 5.5 V supply. A Digital Signal Controller (DSC) is a class of embedded processor that fuses a modified Harvard DSP engine with a microcontroller core on the same die. The dsPIC30F5016 belongs to the broader hierarchy of microcontrollers and digital signal processors, purpose-built for closed-loop control and high-speed signal conditioning where neither a pure MCU nor a standalone DSP is sufficient. Key features include a 16-bit architecture with single-cycle 16x16 MAC, dedicated motor-control PWM modules, a 12-bit ADC with up to 16 channels, encoder interface hardware, and CAN/I2C/SPI/UART peripherals. The 80-pin TQFP-EP package offers 68 digital I/O lines plus analog inputs, and the 40 MHz core is paired with deterministic interrupt latency suitable for field-oriented control of three-phase motors. Architecturally, the device combines a 24-bit instruction word DSP core with 16-bit data paths and dual data-access RAM, providing the MAC bandwidth required for Park/Clark transforms, PI loops, and space-vector modulation without offloading to a companion DSP. The enhanced Flash supports self-programming, and the on-chip EEPROM emulation simplifies parameter storage in field-deployed drives. Typical applications include three-phase AC induction and PMSM motor drives, BLDC fan and pump controllers, industrial servo amplifiers, power-conversion control loops, and automotive sensor conditioning. The integrated quadrature encoder interface and PWM/ADC synchronization blocks are tailored to digital current and torque loops in FOC implementations. When designing with this part, pay attention to the maximum 20 MIPS performance envelope (use dsPIC30F5016-30I for 30 MIPS), the 3.0-5.5 V supply window (no 1.8 V operation), and the larger 12x12 mm TQFP footprint that simplifies four-layer motor-drive PCB layout. The page below synthesizes distributor pricing, drop-in alternatives, and design notes not found in the manufacturer datasheet.

견적 요청 문의하기
DSPIC30F5016T-20E/PT - dsPIC30F 20MIPS 66KB Flash DSC | Microchip
DSPIC30F5016T-20E/PT

DSPIC30F5016T-20E/PT - dsPIC30F 20MIPS 66KB Flash DSC | Microchip

The Microchip DSPIC30F5016T-20E/PT is a 16-bit Digital Signal Controller (DSC) from the dsPIC30F family, delivering 20 MIPS of computational throughput at a 40 MHz clock speed in an 80-pin TQFP (12x12 mm) package. It integrates 66 KB of Flash program memory (22K x 24), 2 KB of RAM, and 1 KB of EEPROM, while exposing 60 general-purpose I/O pins for peripheral expansion and system interconnect. A Digital Signal Controller (DSC) is a hybrid class of microcontroller that combines a standard MCU instruction set with a dedicated DSP engine for single-cycle MAC operations. Within the broader taxonomy, a DSC bridges microcontroller -> microcontroller with DSP -> digital signal controller -> embedded processor -> semiconductor. The dsPIC30F5016 specifically targets motor control, digital power conversion, and real-time sensor processing applications where deterministic math throughput is critical. Key features include a 16-bit modified Harvard architecture with DSP dual-operand fetch, a 12-bit ADC with up to 16 channels and 200 ksps conversion rate, motor-control PWM with up to 8 outputs, and integrated communications peripherals: CAN, I2C, SPI, and UART/USART. The device operates from a 4.5 V to 5.5 V supply across the extended -40 C to +125 C industrial temperature range and includes 5 input capture and 5 output compare modules for precise event timing. The DSP engine executes a 17 x 17-bit signed fractional or integer multiply in a single cycle with 40-bit accumulator support, enabling real-time closed-loop control loops such as field-oriented control (FOC) for three-phase motors without CPU offloading. The dsPIC30F5016 also incorporates a CRC engine, watchdog timer, and multiple power-saving modes for safety-critical embedded designs. Typical applications include AC induction and BLDC motor drives, digital uninterruptible power supplies (UPS), variable-frequency drives (VFDs), power-factor correction converters, automotive sensor interfaces, and industrial automation controllers. The wide operating voltage and -40 C to +125 C range make it suitable for both factory-floor and automotive underhood deployments. When designing with the DSPIC30F5016T-20E/PT, ensure that the ADC input impedance and acquisition time settings match the source impedance to avoid conversion errors, and place the device on a 4-layer PCB with a solid ground plane to manage switching noise from the PWM outputs. The 'T' suffix denotes tape-and-reel packaging, while the '20E' suffix denotes the 20 MIPS speed grade and extended temperature range.

견적 요청 문의하기
DSPIC30F5016T-30I/PT - 30 MIPS 16-bit DSP MCU 66KB Flash | Microchip
DSPIC30F5016T-30I/PT

DSPIC30F5016T-30I/PT - 30 MIPS 16-bit DSP MCU 66KB Flash | Microchip

The Microchip Technology DSPIC30F5016T-30I/PT is a high-performance 16-bit Digital Signal Controller (DSC) from the dsPIC30F family, delivering 30 MIPS of processing throughput, 66 KB (22K x 24) of program Flash, 4 KB of RAM and 1 KB of EEPROM in an 80-pin TQFP (12x12 mm) package supplied on tape and reel. A Digital Signal Controller (DSC) is a hybrid device that combines the deterministic interrupt response and peripheral set of a microcontroller with the mathematical horsepower of a Digital Signal Processor (DSP). In the broader taxonomy, a DSC belongs to the family of microcontrollers (MCU), which sit under embedded processors, which in turn fall under semiconductors. The dsPIC30F sub-family targets 5V-tolerant motor control and power-conversion designs where many competing DSPs require 3.3V rails or external level shifters. Key features of the DSPIC30F5016T-30I/PT include a modified Harvard architecture with a 24-bit instruction word, single-cycle MAC, 40-bit accumulators, an integrated 10/12-bit ADC with up to 16 channels, motor-control PWM modules, UART/SPI/I2C/CAN peripherals, and a wide 2.5V to 5.5V operating voltage that lets the part communicate directly with 5V analog front-ends. The 80-pin TQFP package exposes up to 68 general-purpose I/O pins, which is unusually high for this class. Architecturally, the device pairs a 16-bit native data path with DSP-friendly extensions (DO and REPEAT loops, fractional arithmetic), enabling closed-loop control loops and digital filtering at update rates suitable for three-phase inverters, UPS systems and audio class-D amplifiers. The on-chip regulator supports both 3.3V and 5V rails, reducing BOM cost. Typical applications include BLDC and PMSM motor drives, uninterruptible power supplies, power-factor correction stages, digital audio class-D amplification, and industrial sensor conditioning. The 5V-tolerant ADC simplifies mixed-signal board design. When designing with this device, budget Flash for both the application code and any motor-control libraries. Code compiled for the -30 speed grade does not run unchanged on the -20 grade, and the I/Os are not 5V-tolerant when the part is running at 3.3V without the internal regulator engaged. This page synthesizes distributor pricing, pin-compatible dsPIC30F variants, and practical design notes not found in the standalone manufacturer datasheet.

견적 요청 문의하기