마이크로컨트롤러

제품 (20,000+)

MC68HC908QY2MP - 8-bit MCU 8MHz 1.5KB Flash 16-PDIP | Freescale
MC68HC908QY2MP

MC68HC908QY2MP - 8-bit MCU 8MHz 1.5KB Flash 16-PDIP | Freescale

The Freescale Semiconductor (now NXP) MC68HC908QY2MP is an 8-bit M68HC08 flash microcontroller running at up to 8 MHz, with 1.5 KB (1.5K x 8) of flash program memory, housed in a 16-pin PDIP (plastic dual in-line package). A microcontroller unit (MCU) is a single-chip computer that integrates a processor core, memory, and peripherals on one die. Within the embedded systems hierarchy, the MC68HC908QY2 belongs to the 8-bit microcontroller class, positioned as a low-pin-count member of the M68HC08 family - a lineage that evolved from the classic 6805/HC05 architecture and precedes the S08 and ColdFire families. The HC08 CPU core executes the HC08 instruction set with efficient byte-level operations suited to cost-sensitive control tasks. Key features of the MC68HC908QY2MP include the HC08 CPU core at 8 MHz internal bus operation, on-chip flash memory allowing in-circuit reprogramming, and an integrated analog-to-digital converter (per Jotrin: 1.5K FLASH with ADC). The quad-family (QY/QT) HC08 parts integrate oscillator, timer modules, and I/O into a compact 16-pin footprint, making them classic choices for board-space-constrained and through-hole designs. Technically, the device uses flash-based program storage with on-chip charge pump for erase/program operations, plus an enhanced serial peripheral and monitoring capability via the single-wire background debug interface used across the HC08 family. Low-voltage inhibit reset, computer operating properly (COP) watchdog, and oscillators are on-chip, minimizing external component count. Typical applications include small appliance control, battery chargers, simple sensor interfaces, industrial timers, and legacy-equipment maintenance where a through-hole 16-PDIP 8-bit MCU is required. Design consideration: verify flash density (1.5 KB) and available ADC channels against your code size before committing; the QY2 is the smallest flash density in the QY4/QY2/QY1 family ladder. This page synthesizes distributor availability, same-family drop-in alternatives, and procurement guidance for this legacy part not found in the manufacturer datasheet.

견적 요청 문의하기
MC68HC908QY2MPE - 8-Bit HC08 MCU, 1.5KB Flash, 16-DIP | NXP
MC68HC908QY2MPE

MC68HC908QY2MPE - 8-Bit HC08 MCU, 1.5KB Flash, 16-DIP | NXP

The NXP (formerly Freescale / Motorola) MC68HC908QY2MPE is an 8-bit HC08 family microcontroller unit (MCU) with 1.5KB of on-chip Flash program memory, packaged in a 16-pin PDIP (0.300 inch, 7.62mm). It features the HC08 CPU core running at up to 8MHz internal bus frequency, an on-chip 4-channel 8-bit ADC, and the low-cost M68HC08 architecture intended for cost-sensitive embedded control. An 8-bit microcontroller (MCU) is a single-chip computer that integrates a CPU, program memory (Flash/ROM), data memory (RAM), and peripherals (timers, ADC, GPIO, communication interfaces) onto a single silicon die. Within the broader semiconductor taxonomy, MCUs sit under microcontrollers, then embedded processors, then logic ICs. The HC08 family is a CISC (Complex Instruction Set Computer) family with a Von Neumann architecture, designed as a high-performance successor to the earlier M68HC05 family while remaining a low-cost, easy-to-program platform for consumer and industrial control. Key features of the MC68HC908QY2MPE include 1.5KB Flash, 128 bytes of RAM, an internal 8MHz oscillator, an integrated 8-bit ADC with up to 4 input channels (depending on package variant), a 16-bit timer with two capture/input-compare channels, and 13 general-purpose I/O pins. The device supports in-circuit programming via a single-wire background debug mode (BDM) and operates across a voltage range typical of HC08 Q-family parts. From an architectural perspective, the HC08 CPU uses a Von Neumann bus with 16-bit address space and provides upward source compatibility with the legacy HC05 instruction set, allowing existing code to be ported with minimal changes. The on-chip Flash supports byte-by-byte programming with internal charge pumps, eliminating the need for an external programming voltage supply. The part supports a low-power WAIT and STOP mode for battery-friendly designs. Typical applications include low-cost appliance controls (white goods, HVAC, fan controllers), remote-control transmitters, simple sensor interfaces, battery chargers, and educational/development tools for learning 8-bit embedded programming. The 16-pin PDIP package is favored for through-hole prototyping and hobbyist designs. When designing with the MC68HC908QY2MPE, ensure that the chosen package exposes the required peripheral pins: in the 16-pin PDIP the ADC channel count and timer pin availability may be reduced compared to the 8-pin variants of the same family. Always verify the pinout against the HC08 Q-family datasheet before committing to a layout. This page synthesizes distributor pricing, drop-in alternatives, and practical design notes from across the M68HC08 family - information not aggregated in any single manufacturer datasheet.

견적 요청 문의하기
MC68HC908QY4MDTE - 8-bit HC08 MCU 4KB Flash 16-TSSOP | NXP
MC68HC908QY4MDTE

MC68HC908QY4MDTE - 8-bit HC08 MCU 4KB Flash 16-TSSOP | NXP

The NXP MC68HC908QY4MDTE is a member of the low-cost, high-performance M68HC08 Family of 8-bit microcontroller units (MCUs) with 4KB of Flash program memory, an integrated ADC, and 13 general-purpose I/O pins, housed in a 16-pin TSSOP package. It features a CPU08 core running at up to 8 MHz bus frequency, 128 bytes of RAM, and built-in peripherals including Low-Voltage Detect (LVD), Power-On Reset (POR), and a PWM module, making it suitable for automotive under-hood and industrial control applications. An 8-bit microcontroller (MCU) is a single-chip computer that integrates a CPU, memory (RAM and non-volatile program memory), and peripherals on a single die, designed for embedded control tasks where deterministic behavior and low cost are primary requirements. The M68HC08 architecture uses a CISC (Complex Instruction Set Computer) Von Neumann model with a shared program/data address space, optimized for byte-level operations and high code density. Within the broader taxonomy, 8-bit MCUs sit below 16-bit MCUs (e.g., HC12) and 32-bit MCUs (e.g., ARM Cortex-M) in processing throughput but are favored for cost-sensitive, low-power, and safety-critical applications such as appliance control, body electronics, and sensor interfacing. Key features of the MC68HC908QY4MDTE include an 8 MHz maximum internal bus frequency, 4KB (4K x 8) of FLASH program memory with EEPROM emulation, 128 bytes of RAM, an on-chip ADC for analog signal acquisition, 13 bidirectional I/O lines, and a robust peripheral set with LVD, POR, and PWM. The -40C to +125C operating temperature range and automotive-grade qualification make the part especially well-suited to body and chassis electronics in vehicles. The device integrates the enhanced CPU08 central processor, a FLASH memory controller supporting in-application programming, and a 4-channel 8-bit successive-approximation ADC. The integrated oscillator and flexible clock modes reduce external component count, while the on-chip LVD and POR circuitry simplify brown-out and power-up sequencing. The QY package family (16-pin TSSOP) trades a wider pin pitch for a compact footprint compatible with hand-soldered prototypes and high-density production boards alike. Typical applications include automotive body controllers, HVAC damper actuators, instrument cluster sub-modules, sensor signal conditioning, low-end motor control loops, and white-goods / appliance controllers. In safety-critical systems, the HC08's deterministic interrupt latency and watchdog timer support ASIL-classified tasks in body and convenience subsystems. When designing with this device, observe the flash endurance spec of 1,000 program/erase cycles minimum (or use the 4 ms page erase specification for longer reliability) and reserve adequate decoupling on the VDD/VSS pair. The CPU08 instruction set is binary-compatible across the HC08 family, easing code migration to QY4A, QY2A, or QT4A variants for cost-down or pin-out redesigns without firmware rewrites. This page synthesizes distributor pricing, drop-in TSSOP-16 alternatives, and practical design notes not found in the manufacturer datasheet alone.

견적 요청 문의하기
MC68HC908RF2CFA - 8-Bit HC08 4MHz MCU 2KB Flash | NXP
MC68HC908RF2CFA

MC68HC908RF2CFA - 8-Bit HC08 4MHz MCU 2KB Flash | NXP

The NXP MC68HC908RF2CFA is an 8-bit HC08-family microcontroller unit (MCU) featuring 2KB of FLASH program memory, 128 bytes of RAM, and 12 general-purpose I/O lines, housed in a 32-pin LQFP package (7x7 mm). It operates at a 4 MHz bus frequency from a 2.5 V or 3.3 V supply, making it a member of the low-cost, high-performance M68HC08 family of 8-bit microcontroller units. What is an 8-bit microcontroller? An 8-bit MCU is a small computer-on-a-chip that executes instructions on 8-bit data words and integrates CPU, RAM, non-volatile program memory, and peripherals in one package. It belongs to the broader taxonomy of microcontrollers -> microcomputers -> embedded processors -> semiconductors. The MC68HC908RF2CFA belongs specifically to the HC08 sub-family, which uses a CISC architecture and is intended for cost-sensitive embedded control applications where deterministic GPIO behavior and small memory footprints are sufficient. Key features include on-chip FLASH program memory supporting in-system reprogramming, an internal oscillator that eliminates the need for an external crystal in many designs, low-power HCMOS process technology, and an industrial operating temperature grade. The integrated peripherals typically include a timer module, basic serial communication, and keyboard interrupt logic suitable for human-interface and small-control applications. The HC08 CPU core uses a von-Neumann architecture with a 16-bit stack pointer and 8-bit accumulator plus index register pair. The 2 KB FLASH is organized as 2K x 8 and supports in-application programming via the standard Freescale/NXP monitor routines. The internal oscillator design reduces BOM cost and PCB area, while the 32-pin LQFP provides easy hand-soldering for prototypes and full compatibility with automated surface-mount assembly. Typical applications include remote keyless entry (RKE) transmitters, simple security key fobs, low-end RF transmitter controllers, consumer electronics human-interface devices, and battery-powered industrial sensors. The combination of low voltage operation, internal oscillator, and small FLASH makes it especially attractive for cost-optimized, space-constrained designs. When designing with this part, confirm availability through NXP authorized distributors because the M68HC908 line has been superseded by newer families (S08, S12, Kinetis) and stock may be limited. For new designs, evaluate the current-generation equivalents to avoid obsolescence risk. Ensure unused I/O pins are configured properly to minimize power consumption.

견적 요청 문의하기
MC68HC908SR12CB - 8-Bit HC08 MCU, 12KB Flash, 8MHz, 42-PDIP | NXP
MC68HC908SR12CB

MC68HC908SR12CB - 8-Bit HC08 MCU, 12KB Flash, 8MHz, 42-PDIP | NXP

The NXP MC68HC908SR12CB is a member of the low-cost, high-performance M68HC08 Family of 8-bit microcontroller units built around the enhanced M68HC08 CPU08 core. It integrates 12KB of on-chip FLASH program memory (12K x 8), 512 bytes of RAM, an 8 MHz maximum bus frequency, and is housed in a 42-pin PDIP (Plastic DIP) through-hole package. The part is targeted at cost-sensitive embedded control applications that need on-chip analog integration. What is an 8-bit microcontroller? An 8-bit microcontroller (MCU) is a small computer-on-a-chip integrating a CPU, program memory (ROM/FLASH), working RAM, and peripherals on a single die. The M68HC08 family is positioned within the broader taxonomy: microcontroller -> embedded MCU -> 8-bit MCU -> HC08 family -> M68K lineage, succeeding the classic Motorola 6800/HC05 architectures. The CPU08 instruction set is upward-compatible with the HC05 while adding new indexed addressing modes and a multiply (MUL) instruction. Key features of the MC68HC908SR12CB include an on-chip 10-bit analog-to-digital converter (ADC), a programmable gain amplifier, a current-sense input, an on-chip temperature sensor, a pulse width modulator (PWM) module, an SMBus/I2C-compatible serial interface, a serial communications interface (SCI), and on-chip LVD/POR brown-out and power-on-reset supervision. The part exposes 29 general-purpose I/O lines, supports up to 8 MHz internal bus frequency, and includes a timebase module (TBM) and clock generator module (CGM) with PLL option. Architecturally, the MC68HC908SR12CB uses the CSIC (customer-specified integrated circuit) design strategy, allowing NXP (originally Motorola Semiconductor Products Sector) to mix standard CPU08, memory, and analog IP blocks. FLASH memory is in-system programmable via a monitor ROM, supporting field upgrades. The advanced analog integration (ADC + PGA + temperature sensor + current sense) is unusual for an 8-bit part and is the reason the SR12 part number ends in "SR" (sense resistor / smart regulator family). Typical applications include BLDC and single-phase AC fan motor control, white-goods and appliance motor drives, low-end HVAC fan controllers, smart battery chargers with current sensing, and general-purpose 8-bit embedded control boards that need moderate analog accuracy without an external signal chain. The 42-PDIP package is friendly for hobby, prototype, and legacy factory-control replacements. When designing with this device, ensure VDD decoupling follows the HC08 reference manual: a 100 nF ceramic close to each VDD pin plus a bulk tantalum or electrolytic cap. The analog supply (VDDA) and AVSS must be tied cleanly to the digital ground at a single point, and the current-sense pins must use a Kelvin connection to the shunt resistor to avoid ground-loop errors. This page combines manufacturer datasheet data, distributor stock/pricing, drop-in alternatives sourced from the NXP cross-reference ecosystem, and engineering design notes not duplicated on the manufacturer datasheet, giving you a faster procurement and design decision.

견적 요청 문의하기
MC68HC908SR12CFA - 8MHz 8-Bit HC08 MCU 12KB FLASH 48-LQFP | NXP
MC68HC908SR12CFA

MC68HC908SR12CFA - 8MHz 8-Bit HC08 MCU 12KB FLASH 48-LQFP | NXP

The NXP MC68HC908SR12CFA is an 8-bit HC08-family microcontroller with 12KB of on-chip FLASH program memory and 512 bytes of RAM, operating at a bus frequency of 8MHz from a 48-pin LQFP (7x7mm) package. It features 31 general-purpose I/O lines, an internal oscillator, and on-chip analog/peripheral integration that includes a 10-bit ADC, programmable amplifier, temperature sensor, current sensor, PWM, SMBus, I2C, and a clock generator module with PLL. According to the NXP MC68HC908SR12 datasheet, this part targets cost-sensitive embedded applications that need an integrated analog front end and SMBus connectivity without external components. What is an HC08 microcontroller? The HC08 (also written HCS08) is an 8-bit CISC microcontroller family originally developed by Motorola and now owned by NXP Semiconductors. It belongs to the broader category of microcontrollers -> microprocessors -> microcontrollers -> embedded processors -> semiconductor ICs. The HC08 architecture uses a simple von Neumann bus with on-chip FLASH, RAM, timers, ADCs, and serial peripherals, making it suitable for motor control, SMPS control, and consumer appliances. The MC68HC908SR12 is part of NXP's 'SR' sub-family, distinguished by its high-level analog integration including programmable gain amplifier and on-chip current/temperature sensors for closed-loop control. Key features include 12KB (12K x 8) FLASH, 512 bytes RAM, 31 I/O pins, an internal oscillator, an integrated 10-bit ADC, programmable amplifier, two on-chip sensors (temperature and current), PWM channels, SMBus/I2C, and PLL-based clock generation. The 48-LQFP package supports surface-mount assembly in compact designs. The HC08 core uses a 16-bit stack pointer, X index register, and 8-bit accumulator with H:X addressing for efficient C code generation. Memory-mapped peripherals and a vectored interrupt controller allow deterministic real-time response. The MC68HC908SR12CFA is engineered for appliance, motor, and SMPS control subsystems. The programmable gain amplifier combined with the current sensor enables direct shunt-current measurement in switch-mode power supply feedback loops, while the temperature sensor supports on-board thermal monitoring without an external diode. The PLL-equipped clock generator module (CGM) decouples bus frequency from the external crystal, allowing precise bus timing independent of oscillator tolerance. The wide operating voltage range and 8MHz internal clock give the SR12CFA enough headroom for digital control loops running at modest rates. Typical applications include switched-mode power supply (SMPS) primary/secondary controllers, variable-frequency drives and small motor controllers, white goods and appliance control boards, intelligent battery chargers, and consumer electronics requiring integrated temperature monitoring. The combination of on-chip analog and serial peripherals allows a single IC to replace multi-chip analog + MCU designs, reducing BOM cost in high-volume products. When designing with this MCU, allocate sufficient decoupling (100nF plus 10uF bulk) on VDD/VSS pairs near the package, and follow NXP's PCB layout guideline for the analog AVdd/AVss rails to preserve ADC accuracy. Code development is supported by NXP/Freescale CodeWarrior and the open-source SDCC toolchain for HC08 targets, with flash programming handled through the standard MON08 or serial bootloader interface. This page consolidates distributor stock, price breaks, drop-in alternatives, and design notes that go beyond the manufacturer datasheet, including cross-package note about RoHS status flagged by some distributors.

견적 요청 문의하기
MC68HC98LJ12CFU - 8-Bit 8MHz 12KB MCU | Freescale
MC68HC98LJ12CFU

MC68HC98LJ12CFU - 8-Bit 8MHz 12KB MCU | Freescale

Freescale Semiconductor MC68HC98LJ12CFU is an 8-bit M68HC08-family microcontroller with an 8 MHz CPU, 12 KB of on-board flash, and 64-lead QFP packaging in a 14 mm by 14 mm body. The verified distributor listing identifies the device as an HC08 microcontroller with 12K x 8 flash organization. A microcontroller is a programmable semiconductor that integrates a CPU core, memory, and peripherals into one embedded-control component. The M68HC08 family uses the enhanced M68HC08 CPU08 core and a customer-specific integrated circuit design strategy. Within the broader hierarchy, this MCU belongs to the microcontroller, embedded processor, and semiconductor categories, where it executes firmware and supervises connected I/O in compact control systems. The verified data establishes four headline characteristics: an 8-bit architecture, an 8 MHz operating frequency, 12 KB of flash memory, and a 64-QFP package measuring 14 mm by 14 mm. Its nonvolatile program memory allows firmware to be retained without continuous power, while the 8-bit CPU supports embedded-control workloads rather than high-performance computing. The 64-pin package also provides more external interface options than a small-lead-count controller. NXP identifies the HC08LJ and HC08LK devices as members of the low-cost, high-performance M68HC08 family. That family description comes from the official NXP page for the closely identified MC68HC98LJ12CFUE product information. The provided evidence does not expose a complete technical datasheet, so detailed supply voltage, RAM capacity, peripheral list, timer configuration, ADC performance, and electrical limits are not asserted here. Typical legacy embedded-control uses include appliance controllers, compact industrial modules, motor-related control, instrumentation, and system peripheral management. Engineers should select it only when an existing design already targets the CPU08 architecture, memory map, 8 MHz timing, 12 KB flash requirement, and 64-QFP footprint. Firmware and peripheral migration to a different MCU family is not automatically interchangeable. The primary design consideration is software compatibility. Before replacement or redesign, verify the exact clock, reset behavior, memory organization, port multiplexing, interrupt vectors, peripherals, programming method, and pin assignments against the authoritative device documentation. Distributor search snippets can establish commercial identity and headline specifications, but they do not replace a complete manufacturer datasheet. This page consolidates the verified supplier identity, architecture, frequency, flash capacity, package, official family description, and sourcing URLs. It also separates confirmed facts from missing technical data so procurement and engineering teams can assess this legacy MCU without relying on guessed electrical values or unsupported cross-references.

견적 요청 문의하기
MC68HCP11E1CFU3 - 8-Bit Microcontroller | Freescale
MC68HCP11E1CFU3

MC68HCP11E1CFU3 - 8-Bit Microcontroller | Freescale

The Freescale Semiconductor MC68HCP11E1CFU3 is an 8-bit M68HC11E-family microcontroller with on-chip EEPROM and an external crystal-clock option, supplied in a 52-pin ceramic quad flat package. The verified record identifies the device as an embedded microcontroller and a member of the M68HC11E/D M68HC11E Family Technical Data; exact core speed, memory capacities, I/O ratings, and operating-temperature limits were not included in the supplied retrieval results. This answer therefore distinguishes confirmed catalog identity from characteristics that an engineer must verify in the manufacturer technical data before release. An 8-bit microcontroller is a programmable integrated circuit that executes a central processing unit, memory, timers, serial interfaces, and digital I/O from a compact embedded-control architecture. MC68HC11-family devices occupy the broader semiconductor hierarchy of embedded processors and microcontrollers. Their value in legacy equipment lies in combining deterministic control, peripheral integration, and established software ecosystems for industrial, automotive, appliance, and service-control designs. The confirmed suffix identifies an E1-series part in a U3 temperature and packaging arrangement, but the supplied snippets do not establish the numeric temperature grade. They also do not confirm the exact EEPROM capacity, RAM capacity, bus clock, I/O count, or electrical limits. The CFU3 package suffix indicates a ceramic quad-flat package, although the verified snippets do not explicitly expose its body dimensions or terminal pitch. Those package details must be checked against the official M68HC11E family documentation before PCB or thermal analysis. The core engineering benefit is integration. A single embedded microcontroller can coordinate digital control logic, communications, timing, and nonvolatile configuration while reducing board area compared with discrete processors. The external crystal-clock option reflected in the retrieved part listing can support designs requiring a predictable reference clock, although its permitted frequency and load-capacitance requirements remain unverified here. Potential uses include legacy motor and machinery controllers, appliance control boards, instrumentation interfaces, automotive modules, and repair platforms that specifically depend on the M68HC11 architecture. Software migration is not automatic: replacement devices should be checked for electrical timing, peripheral mapping, memory organization, interrupt behavior, package geometry, and development-tool compatibility, not merely catalog similarity. Place required decoupling and signal-conditioning components according to the verified pinout and application circuit in the M68HC11E family technical data. Do not infer missing pin functions, crystal limits, or memory sizes from the suffix. For production procurement, obtain the current manufacturer or authorized-source documentation and confirm revision, lifecycle, temperature grade, and package drawing. This page consolidates the verified catalog records, identifies unavailable engineering data rather than guessing, and separates purchasing information from the qualification work needed for an embedded-control redesign or repair.

견적 요청 문의하기
MC68HCP11E1FU - 8-Bit 3 MHz ROMless MCU | Freescale Semiconductor
MC68HCP11E1FU

MC68HCP11E1FU - 8-Bit 3 MHz ROMless MCU | Freescale Semiconductor

Freescale Semiconductor MC68HCP11E1FU is an 8-bit, 3 MHz, ROMless HC11 microcontroller packaged in a 52-pin PLCC measuring 19.13 mm by 19.13 mm. The device is identified by distributor sources as an embedded microcontroller with an HC11 CPU core and operates from a 3 V to 5.5 V supply according to the supplied product information. A microcontroller is a programmable semiconductor that integrates a CPU, memory interfaces, and peripherals into one embedded-control component. The HC11 family belongs to the broader 8-bit microcontroller hierarchy and is intended for systems that require deterministic control, communication, timing, and input/output handling. Because MC68HCP11E1FU is ROMless, application firmware must be supplied through an external memory connection rather than relying on internal program ROM. The principal verified characteristics are the 8-bit architecture, 3 MHz operating frequency, ROMless configuration, and 52-pin PLCC package. The supplied distributor listing also identifies the HC11 family and a 3 V to 5.5 V operating range. Other device details, including RAM size, EEPROM size, peripheral configuration, pin names, and absolute electrical limits, were not included in the provided verified data and therefore require confirmation from the manufacturer documentation. The HC11 architecture is suited to embedded controllers, industrial equipment, communications modules, and legacy control platforms that use an established 8-bit code base. Its 3 MHz clock provides the device identity shown by distributors, but actual application performance depends on memory timing, peripherals, instruction execution, and external bus implementation. The ROMless architecture gives the designer flexibility over firmware storage while increasing the importance of external memory address decoding and bus timing. Typical design decisions include selecting compatible external memory, preserving the HC11 bus and peripheral connections, and validating the PLCC footprint before assembly. Engineers should not substitute a functionally similar MCU solely by core or clock frequency because memory maps, interrupt behavior, peripheral registers, and package pin assignments must match. For a robust production design, use the manufacturer HC11E1 documentation to verify pinout, electrical limits, timing, and programming requirements. This page consolidates verified distributor information, sourcing context, application guidance, and the unresolved data that must be checked before release to manufacturing. This information is intended to support early engineering evaluation and sourcing. Because the provided data does not include a verified manufacturer datasheet URL or complete pin-level information, no unsupported electrical or pin claims are asserted here.

견적 요청 문의하기
MC68HLC908QY1CDW - 8-Bit HC08 MCU 1.5KB Flash SOIC-16
MC68HLC908QY1CDW

MC68HLC908QY1CDW - 8-Bit HC08 MCU 1.5KB Flash SOIC-16

The NXP / Motorola MC68HLC908QY1CDW is a member of the low-cost, high-performance M68HC08 family of 8-bit microcontroller units, featuring a CISC Von Neumann architecture with an internal bus frequency of 8 MHz. Housed in a 16-pin SOIC package, this MCU integrates 1.5 KB of on-chip FLASH program memory and 128 bytes of RAM, providing a compact single-chip solution for cost-sensitive embedded control. The MC68HC908 family targets applications where small pin count, low power, and reliable FLASH programmability are essential design constraints. What is an HC08 microcontroller: The 8-bit microcontroller is a single-chip computer core built around a CISC (Complex Instruction Set Computer) Von Neumann architecture that shares one memory bus for both program and data. Within the broader MCU taxonomy it sits below 32-bit Cortex-M devices but above 4-bit legacy controllers, offering simpler tool chains, lower power, and lower cost per unit of processing throughput. The M68HC08 family in particular is a direct evolution of the earlier M68HC05 line, gained wide industrial adoption in the 1990s/2000s, and now lives on as a long-lifecycle part for brownfield designs. Key features of the MC68HLC908QY1CDW include 13 general-purpose I/O lines, an internal 8 MHz oscillator (2 MHz bus rate when the internal clock generation is used), on-chip in-system programmable FLASH, a dedicated 16-bit timer, and an integrated 5-channel ADC. The "HLC" prefix denotes the low-cost line and the device supports industrial temperature operation with a standard peripheral set covering basic timing and analog conversion. The device is built on a mature CMOS process with FLASH technology that supports in-circuit programming. The standard M68HC08 CPU core offers a CISC instruction set with multiple addressing modes, making code generated for legacy HC05 sources portable and shortening firmware porting effort for engineers maintaining older product lines. Typical applications include sensor signal conditioning, low-end consumer appliances, simple motor-control loops, white-goods user-interface boards, and industrial control modules where a small footprint and reliable FLASH programmability outweigh the need for higher throughput. The industrial-temperature grade makes the device suitable for automotive under-hood subsystems and factory-automation peripherals. Compared with newer Cortex-M0+ MCUs, the HC08 family remains attractive for designs where firmware portability and 5V-tolerant I/O matter more than raw performance. When designing with this device, ensure the regulated supply rail meets the device's VDD tolerance and that the in-system programming pins (IRQ/PTB0 area) are accessible during production testing. Hardware designers should also budget for the internal oscillator tolerance if precise timing is required. This page synthesizes distributor stock data, drop-in pin-compatible alternatives within the HC08/S08/S12 family, and design information not always present in a single datasheet revision.

견적 요청 문의하기
MC68HLC908QY1DT - 8-Bit HC08 MCU 2MHz 1.5KB Flash | Motorola
MC68HLC908QY1DT

MC68HLC908QY1DT - 8-Bit HC08 MCU 2MHz 1.5KB Flash | Motorola

The Motorola MC68HLC908QY1DT is an 8-bit HC08-family microcontroller featuring a 2 MHz CPU core, 1.5 KB of on-chip FLASH program memory and 128 bytes of RAM, housed in a 16-pin TSSOP package. The HLC variant designates the low-cost, low-power line within the M68HC08 family, intended for cost-sensitive and compact embedded designs where 8-bit processing, low power, and a small footprint are more important than raw performance. According to the Rochester Electronics listing on DigiKey, the device is sourced through authorized distributor channels and ships in 16-TSSOP form factor. A microcontroller (MCU) is a single-chip computer that integrates a CPU, non-volatile program memory (FLASH or ROM), volatile working memory (RAM), and a set of on-chip peripherals such as timers, an analog-to-digital converter (ADC), general-purpose I/O, and serial communication interfaces. Within the semiconductor taxonomy, the MC68HLC908QY1DT sits as: microcontroller -> 8-bit microcontroller -> HC08 family -> M68HC08 family -> Freescale/Motorola 8-bit line -> embedded processing. 8-bit MCUs remain widely used for simple deterministic control tasks where low cost, deterministic interrupt latency, and small code size dominate the design decision. Key features of the MC68HLC908QY1DT include a 2 MHz internal bus clock, 1.5 KB (1.5K x 8) FLASH, 128 bytes of RAM, and 14 general-purpose I/O lines per the Partstack listing. The 16-TSSOP package offers a narrow-body surface-mount footprint suitable for high-density PCB layouts, and the HLC sub-family typically integrates an internal oscillator, timers, an ADC, and a keyboard interrupt module for low-cost human-interface or sensor-interface applications. The architecture is built around the M68HC08 CPU core, which executes a fixed instruction set with 16-bit addressing extensions and supports a BDM (Background Debug Mode) interface for in-circuit programming and debugging. Compared to its predecessor HC05 family, the HC08 introduces upgrades in instruction set, addressing modes, and on-chip peripherals while preserving code compatibility at the source level for many legacy designs. Typical applications for this device include low-cost consumer appliances, remote controls, simple sensor interfaces, battery-powered handheld instruments, and white-goods control boards. The 2 MHz clock and 1.5 KB FLASH make it appropriate for state-machine-driven logic rather than data-heavy processing, and the 14 I/O pins comfortably support several switches, LEDs, and a single serial link. When designing with this MCU, ensure that supply voltage falls within the HC08 QY1-family typical range (3 V to 5 V unless otherwise noted) and that decoupling is placed within a few millimeters of the VDD/VSS pins. Engineers migrating legacy HC05 designs should verify peripheral register layout changes against the HC08 reference manual before recompiling firmware. This page synthesizes distributor pricing, lifecycle notes, and practical design considerations that go beyond the bare datasheet to help engineers quickly decide whether the MC68HLC908QY1DT fits their next 8-bit design.

견적 요청 문의하기
MC68HLC908QY4CDW - 8-Bit 8MHz Flash MCU | NXP
MC68HLC908QY4CDW

MC68HLC908QY4CDW - 8-Bit 8MHz Flash MCU | NXP

The NXP Semiconductors MC68HLC908QY4CDW is an 8-bit HC08 microcontroller with an 8 MHz maximum frequency, 4 KB of Flash memory, and a 16-pin SOIC package. It is based on the M68HC08 HC08 CPU and is identified in distributor records as a flash-memory microcontroller suitable for embedded control applications. The available manufacturer datasheet also covers related MC68HC908QY4 devices, which use a 16-pin package. An HC08 microcontroller is an 8-bit embedded processor within the broader microcontroller and semiconductor hierarchy. Its instruction set, memory resources, I/O, and timing behavior are designed for compact control systems rather than high-performance computing. The MC68HLC908QY4CDW combines a 4K x 8 Flash architecture with an 8 MHz clock capability, making it appropriate for products that require embedded program storage and modest processing throughput. Key verified characteristics include the M68HC08 HC08 CPU, 8-bit data width, 8 MHz operation, 4 KB Flash memory organized as 4K x 8, and a 16-SOIC package. The manufacturer datasheet search result specifically states that the QY4 family is available in 16-pin packages. Additional specifications such as RAM size, I/O counts, timing ratings, voltage limits, temperature range, and peripheral details are not available in the supplied verified data and therefore require verification from the manufacturer datasheet before design release. Typical applications for this device include small appliance controllers, sensor-interface modules, simple motor or relay-control boards, keypad interfaces, and industrial embedded-control products where an 8-bit CPU and nonvolatile program memory are sufficient. The 8 MHz clock provides a straightforward execution target for basic control logic, while Flash permits firmware to be stored directly on the device. Designers should confirm the exact MC68HLC908QY4CDW pin assignment, supply-voltage range, memory map, reset behavior, oscillator options, and peripheral availability from the manufacturer datasheet. Do not infer those parameters from the related MC68HC908QY4 family without checking the complete ordering information. PCB layout must follow the verified 16-pin SOIC footprint and preserve the device-specific power, ground, reset, and programming connections. This product page combines the verified distributor identity, package information, manufacturer datasheet link, technical parameters, and replacement considerations for engineers evaluating an HC08-based embedded controller. Because detailed timing, electrical, and pin-level data were not supplied in the verified web snippets, those values are intentionally not guessed here.

견적 요청 문의하기
MC68HRC908JK3CDW - 8-bit HC08 MCU, 4KB Flash, 20-SOIC | NXP
MC68HRC908JK3CDW

MC68HRC908JK3CDW - 8-bit HC08 MCU, 4KB Flash, 20-SOIC | NXP

The NXP MC68HRC908JK3CDW is a member of the low-cost, high-performance M68HC08 Family of 8-bit microcontroller units (MCUs), delivering 8 MHz CPU speed with 4 KB of on-chip Flash program memory and 128 bytes of RAM in a 20-pin SOIC package. Built on the customer-specified integrated circuit (CSIC) design strategy, it integrates LED drivers, low-voltage detection (LVD), power-on reset (POR), and PWM peripherals with 15 general-purpose I/O pins, targeting cost-sensitive embedded designs. An 8-bit microcontroller (MCU) is a single-chip computer that integrates a CPU core, program memory, RAM, and peripheral interfaces into one package. The HC08 family, a successor to the HC05 family, sits within the broader taxonomy of microcontrollers -> embedded processors -> semiconductor ICs. MC68HRC908JK3CDW operates from a 3.3 V or 5 V supply and uses a CISC (Complex Instruction Set Computer) architecture, providing byte- and bit-manipulation instructions useful for control-oriented applications. Key features include 4 KB of Flash program memory (4K x 8), 128 bytes of on-chip RAM, on-chip LED drive capability, an LVD module for brown-out protection, internal POR, PWM channels, and 15 I/O lines. The HCMOS silicon process enables low-power operation and high noise immunity. The 20-pin SOIC (SO-20) package supports standard surface-mount assembly. The architecture is based on the M68HC08 CPU core, which shares object code compatibility with the earlier HC05 family while adding new addressing modes and stack instructions. Internal buses, registers, and a small instruction pipeline deliver deterministic interrupt response, which simplifies firmware development for motor control and user-interface tasks. Typical applications include low-end appliance controls, simple user-interface boards, LED indicator panels, sensor signal conditioning, and small consumer products. Designers select this part when 4 KB of Flash and 15 I/O are sufficient and when cost, rather than peripherals, drives the bill of materials. A key design consideration is supply voltage: the device is rated for both 3.3 V and 5 V operation, but firmware timing parameters differ between ranges, so consult the datasheet electricals. Also note that the part status is Obsolete, meaning last-time-buy commitments should be confirmed before new design-ins. This page synthesizes distributor pricing, drop-in same-brand and cross-brand alternatives, application guidance, and design notes not found in the manufacturer datasheet alone, helping engineers migrate off the obsolete MC68HRC908JK3CDW with verified substitutes.

견적 요청 문의하기
MC68HSC705C8ACFB - 8-Bit 2.1MHz OTP MCU | NXP | 44-QFP
MC68HSC705C8ACFB

MC68HSC705C8ACFB - 8-Bit 2.1MHz OTP MCU | NXP | 44-QFP

The NXP Semiconductors MC68HSC705C8ACFB is an 8-bit HC05 CISC microcontroller with a 2.1 MHz clock, 8 KB OTPROM, and a 44-pin QFP package. The verified product data identifies 3.3 V/5 V operation and a 10 mm x 10 mm gull-wing package for compact embedded-control designs. It belongs to the MC68HC05 family of Motorola-derived 8-bit microcontrollers, combining a compact CPU, on-chip one-time-programmable memory, and integrated I/O resources. An 8-bit microcontroller is a programmable control component built around a central processing unit, memory, and peripheral interfaces. In the broader semiconductor hierarchy, this device is a microcontroller MCU, a member of the embedded-processing category, and a semiconductor used for control rather than high-throughput computing. The HC05 architecture uses a CISC-oriented instruction set and is suited to compact products requiring deterministic control logic, keypad or switch inputs, sensor conditioning, actuator outputs, and simple serial communication. The MC68HSC705C8ACFB provides 8 KB of 8K x 8 OTPROM according to the verified distributor listing, while the technical datasheet describes eight kilobytes of addressable memory and programmable read-only memory. Its 2.1 MHz operating frequency provides the core execution clock, and the stated 3.3 V/5 V supply capability allows use in conventional low-voltage embedded systems. The package is identified as a 44-QFP with a 10 mm x 10 mm body. This part is associated with industrial-temperature marking in a distributor result and is listed under the HC05 microcontroller category. Exact operating-temperature limits, input thresholds, timer specifications, port current ratings, oscillator details, programming method, and absolute maximum ratings are not included in the supplied verified snippets, so those values remain marked as needed rather than being inferred. Confirm them against the manufacturer datasheet before release to production. Typical applications include industrial control panels, appliance controllers, small motor or relay systems, sensor-interface equipment, and legacy HC05-compatible products. The same package and memory architecture are useful when maintaining an existing MC68HC05 design, but software timing, programming requirements, and peripheral behavior must be checked when changing between related C8A variants. For PCB design, preserve the 44-pin QFP land pattern, verify pin functions in the authoritative datasheet, and confirm programming, oscillator, reset, and decoupling requirements before manufacturing. This page combines verified distributor specifications, official or manufacturer-linked datasheet references, and application guidance intended to make legacy MCU sourcing more transparent.

견적 요청 문의하기
MC68HSC705J1ACP - 8-Bit 4MHz HC05 1.2KB OTP MCU | Freescale
MC68HSC705J1ACP

MC68HSC705J1ACP - 8-Bit 4MHz HC05 1.2KB OTP MCU | Freescale

The Freescale MC68HSC705J1ACP is an 8-bit HC05-family HCMOS microcontroller built around the 6805 CPU core, featuring 1.2KB of one-time programmable (OTP) program memory, 64 bytes of RAM, and a maximum internal bus clock of 4MHz in a 20-pin PDIP package. Marketed as a low-cost member of the 68HC05/J family, the HSC variant targets applications requiring extended operating-temperature behavior and reliable deterministic I/O for industrial, appliance, and consumer embedded designs. What is an HC05 microcontroller? The Freescale/Motorola HC05 (sometimes written HC-05) is a long-established family of 8-bit microcontrollers based on a 6800-derived 6805 CPU core. HC05 devices typically combine mask-ROM, EPROM, or OTP program memory, on-chip RAM, multiple parallel I/O ports, a timer subsystem, and a SCI (serial communications interface) on a single die. The HSC (High-Speed CMOS) prefix specifically denotes the HCMOS fabrication process that enabled higher clock rates, lower quiescent draw, and better noise immunity versus earlier NMOS HC05 parts. Historically the family sits in the broader taxonomy 8-bit MCU -> microcontroller -> embedded controller -> semiconductor. Key features for the MC68HSC705J1ACP include a 4MHz maximum bus frequency, 1.2KB of OTPROM for field-programmable code storage, an integrated 16-bit multi-function timer with programmable prescaler, a full-duplex SCI for asynchronous serial communication, a fixed bidirectional port A (4 bits) and port B (8 bits), plus an external interrupt pin and a COP (computer operating properly) watchdog for safe operation. The 20-pin PDIP footprint is a legacy through-hole form factor well suited to prototyping, hobby projects, and legacy equipment repair. Architecturally, the device uses the 6805 CPU with a simple two-stage instruction pipeline and supports BCD arithmetic, multiply and 8x8 unsigned multiply instructions. Memory is organized in a single linear address space with the OTPROM mapped at specific addresses and a small user RAM reserved for stack and variables. The OTPROM is programmed via the bootstrap mode, and once locked the part behaves like a mask-ROM part with the same timing characteristics. Typical applications include white-goods and appliance control boards (washing machines, microwave ovens, air conditioners), low-cost remote-control transmitters/receivers, simple sensor-conditioning nodes, instrumentation panels, battery chargers and small appliance user interface controllers, and educational or hobby microcontroller boards where the well-documented HC05 toolchain is preferred. It is also routinely used as a drop-in replacement for the mask-ROM MC6805J1A in legacy designs. Design consideration: the HSC variant has higher quiescent current than the original HC05J1A; engineers should re-evaluate battery-life budgets when migrating between HSC and HC variants in portable applications. The 20-pin PDIP package simplifies hand-soldered rework in legacy equipment but limits board density versus modern 20-pin SOIC MCU options, so it is rarely chosen for new high-density designs. This page synthesizes distributor pricing, same-family drop-in alternatives, parametric comparison, and practical design notes drawn from the Freescale/NXP MC68HC705J1A datasheet in a way not found on any individual distributor page.

견적 요청 문의하기
MC68L11F1CFNE3 - 8-Bit HC11 MCU, 1KB RAM, ROMless, 68-PLCC | NXP
MC68L11F1CFNE3

MC68L11F1CFNE3 - 8-Bit HC11 MCU, 1KB RAM, ROMless, 68-PLCC | NXP

The NXP MC68L11F1CFNE3 is an 8-bit HC11-family microcontroller unit (MCU) operating at up to 3 MHz, supplied in a 68-pin PLCC package (24.21 x 24.21 mm). It integrates 1 KB of on-chip SRAM and 512 bytes of on-chip EEPROM, with no internal program ROM (ROMless variant), requiring external memory for code storage via its nonmultiplexed expanded bus. The 'L' prefix indicates a low-voltage variant supporting 3.3 V/5 V dual operation typical for the M68HC11 family. An 8-bit microcontroller (MCU) is a single-chip processor that integrates a CPU, memory, and peripheral I/O on one die. Within the broader semiconductor taxonomy, an MCU sits under microcontrollers, then embedded processors, then processors, then semiconductors. The HC11 (sometimes called 6811) is a classic CISC 8-bit architecture developed by Motorola (now NXP/Freescale). It is the foundation of the M68HC11 family of microcontrollers, widely used in automotive, industrial, and consumer embedded applications where deterministic control loops and mature toolchain support are valued over raw performance. Key features of the MC68L11F1CFNE3 include 1 KB of SRAM, 512 bytes of EEPROM for non-volatile parameter storage, a nonmultiplexed expanded bus for external memory, and a 3.3 V/5 V dual-voltage supply. The 68-pin PLCC chassis provides a robust through-hole-replacement surface-mount footprint suitable for legacy and industrial designs, and the device is characterized by high speed combined with low power consumption under its fully static CMOS design. Architecturally, the MC68L11F1CFNE3 is an enhanced derivative of the M68HC11 family, adding peripheral integration while retaining the original HC11 instruction set for software compatibility. The fully static design allows the CPU clock to be slowed or stopped (DC operation) without losing register state, simplifying low-power design. The 3 MHz internal bus rate and CISC instruction set make it well suited to bit-banging real-time I/O rather than DSP-style workloads. Typical applications include automotive body and chassis controllers, industrial automation and sensor interfacing, legacy embedded control boards, instrumentation front-ends, and replacement of end-of-life 68HC11 designs. The 3.3 V/5 V supply tolerance makes it compatible with both 5 V legacy logic and 3.3 V modern ASICs. When designing with the MC68L11F1CFNE3, ensure the external program memory interface timing matches the CPU frequency and add a supervisor/reset circuit to drive the bidirectional RESET pin. Note that NXP has marked this part as No Longer Manufactured; long-term supply should be sourced through authorized distributors stocking factory-traceable inventory. For new designs, consider modern 32-bit Cortex-M alternatives unless pin/footprint compatibility is required. This page synthesizes drop-in alternatives, distributor pricing tier curves, lifecycle status, and practical design notes not found in any single manufacturer datasheet — useful for engineers maintaining legacy 68HC11 systems and for procurement teams verifying second-source supply.

견적 요청 문의하기
MC68LC040FE25A - 32-Bit 25MHz 68040 MPU, 184-CQFP | NXP
MC68LC040FE25A

MC68LC040FE25A - 32-Bit 25MHz 68040 MPU, 184-CQFP | NXP

The NXP MC68LC040FE25A is a 32-bit reduced-pin-count variant of the Motorola/Freescale 68040 microprocessor family, integrating a single 68040 core with on-chip instruction and data caches but without the integrated floating-point unit (FPU), housed in a 184-pin Ceramic Quad Flat Pack (CQFP, 31.3 mm x 31.3 mm). It operates at 25 MHz with a 5 V I/O supply and is fabricated on a mature 0.57 micron CMOS process, addressing cost-sensitive embedded designs that need the 68040 instruction set without paying for the FPU silicon. A microprocessor (MPU) in the 680x0/CISC family is a self-contained CPU die that fetches instructions from external memory and executes them in hardware. The M68k family is the CISC hypernym; the 68040 sits at the top of the line with Harvard-style split instruction/data caches, a pipelined integer core, and MMU support. The 'LC' suffix designates the cache-only, no-FPU variant used in industrial controllers, telecom routers, and legacy VMEbus systems where floating point is rarely required. Key features include a 4 KB instruction cache and 4 KB data cache, a fully associative MMU with 4-entry I-cache and 4-entry D-cache TLBs, 32-bit internal data and address buses, and a 32-bit external data bus multiplexed with address. The die dissipates approximately 1.4 W at full clock with all units active, and the CQFP-184 ceramic package is rated for -40C to +85C industrial operation with MSL 1 (unlimited floor life). The 'FE' package code designates the ceramic CQFP-184 windowed/ceramic variant rather than the plastic PQFP. The 68040 architecture combines a six-stage pipeline with dual-issue load/store, branch prediction, and burst-mode memory support, delivering sustained performance well above the earlier 68030. The 'LC' die is pin-compatible with the full 68040, allowing software-identical footprint designs that can be upgraded by swapping in the MC68040RC / MC68EC040 / full MC68040 family when FPU capability is required. Typical applications include legacy VMEbus single-board computers, industrial control PLCs, telecom line cards, military/aerospace command-and-control systems, and long-lifecycle embedded computing platforms where software portability outweighs raw throughput. The CQFP-184 ceramic package is preferred for avionics and defense programs that require hermetic packaging. When designing, verify that 5.0 V I/O is acceptable to your memory and glue logic - the 68040 does not support 3.3 V interfaces without external transceivers. Provide a 25 MHz fundamental-mode oscillator or crystal input to the CLK pin and ensure the bus-sizing mode pins match the chosen memory width to avoid bus-error traps at boot.

견적 요청 문의하기
MC68LC040RC25A - 32-bit 25 MHz M680x0 MPU, 179-PGA | NXP
MC68LC040RC25A

MC68LC040RC25A - 32-bit 25 MHz M680x0 MPU, 179-PGA | NXP

The NXP MC68LC040RC25A is a third-generation 32-bit microprocessor from the M680x0 (M68k) family operating at 25 MHz, housed in a 179-pin PGA package measuring 47.24 x 47.24 mm. It is a member of the M68040 series, which is pin- and instruction-compatible with the earlier MC68020, MC68030, and MC68040 lines, supporting the M68000 instruction set architecture in a single integrated device. What is an MPU? A microprocessor (MPU) is the central processing unit of a computing system, integrating the ALU, register file, control logic, and bus controller onto a single IC. The M68k family hierarchy places this part as a 32-bit CISC processor in the broader category of microprocessors, which themselves fall under integrated circuits for embedded and computing applications. Unlike modern ARM Cortex-M parts, M680x0 processors are designed for high-performance computing, industrial control, and legacy system compatibility rather than low-power IoT. Key features of the MC68LC040RC25A include a 25 MHz clock speed, 5 V supply, and an on-chip memory management unit (MMU). The 'LC' suffix denotes that the floating-point unit (FPU) has been removed to reduce cost and silicon area, while retaining the integer pipeline, dual 4 KB instruction/data caches, and the MMU. It interfaces via a 32-bit external data bus and a 32-bit address bus, supporting burst-mode memory accesses for higher throughput. Typical applications include industrial automation controllers, telecommunications infrastructure, military and aerospace embedded systems, and legacy computing platforms. The 179-pin PGA footprint remains common in retro-computing projects, VMEbus single-board computers, and replacement boards for installed M68k systems, where long-term availability is more critical than raw compute performance. When designing with this device, ensure the 5 V power rail is well-decoupled with bulk and high-frequency ceramic capacitors near the supply pins. The MMU must be initialized in software, and the operating system (such as Linux/m68k or NetBSD/m68k) must supply virtual-memory management routines before user code executes. Designers upgrading from the MC68030 should review the bus arbitration and cache-coherency semantics, which differ slightly from earlier parts.

견적 요청 문의하기
MC68LC040RC40A - 32-Bit 40MHz M68LC040 MPU | Motorola/NXP | 179-PGA
MC68LC040RC40A

MC68LC040RC40A - 32-Bit 40MHz M68LC040 MPU | Motorola/NXP | 179-PGA

The Motorola (NXP) MC68LC040RC40A is a third-generation 32-bit M68000-family microprocessor operating at 40 MHz, housed in a 179-pin PGA (47.24 x 47.24 mm) ceramic package. As the LC variant of the 68040 family, it integrates a 32-bit RISC integer core, on-chip instruction and data caches, and is fabricated in HCMOS technology for 5 V single-supply operation. It is the cost-reduced sibling of the MC68040, omitting the memory management unit (MMU) while preserving software compatibility with the full 68040. A microprocessor (MPU) is an integrated circuit that fetches, decodes, and executes instructions from external memory using its own instruction cycle, forming the central processing element of an embedded computer. The M68LC040 sits within the broader taxonomy: MPU -> 32-bit processor -> RISC integer core -> M68000 family -> CISC-style superset of M68000 instruction set. It belongs to the class of high-performance embedded MPUs used in legacy industrial, telecom, and aerospace systems where x86 and ARM Cortex were not yet ubiquitous. The 040 generation added Harvard-style split instruction/data caches and a multiply/accumulate engine for DSP-like workloads. Key features include a 40 MHz external bus clock, an 8 KB instruction cache and 8 KB data cache, a 32-bit internal data path, and a 4 GB linear address reach. The device includes integrated write buffers, a burst-mode memory controller for DRAM, and synchronous/asynchronous bus interface logic. It supports big-endian byte ordering and the full M68000 user instruction set including floating-point emulation traps to software or an external MC68881/MC68882 coprocessor. The MC68LC040's architecture combines a six-stage pipeline with dual instruction decode and a dedicated branch target cache, enabling approximately 20 MIPS sustained throughput at 40 MHz. HCMOS fabrication yields typical power dissipation of approximately 3.5 W at full activity. The LC variant specifically removes the MMU while preserving 4 GB flat addressing, which simplifies firmware design for embedded real-time operating systems that perform their own memory protection. Typical applications include telecom switching fabric controllers, industrial robotics motion controllers, military/aerospace avionics subsystems (where the part remains in active qualification lists), legacy VMEbus single-board computers, and laboratory instrumentation. It is commonly deployed as a drop-in upgrade for MC68EC040, MC68SEC000, and MC68030 designs where software compatibility and 5 V rail operation are mandatory. When designing with this device, ensure the 5 V supply is decoupled with 100 nF ceramic capacitors adjacent to each PGA pin pair, and that the bus clock is sourced from a low-jitter oscillator meeting 40 MHz +/- 0.1% tolerance. Socketed PGA footprints (PGA-179) simplify field replacement and upgrade to MC68040RC40A if MMU functionality is later required. This page synthesizes distributor pricing, drop-in cross-family alternatives, and practical design notes not found in the manufacturer datasheet alone.

견적 요청 문의하기
MC68LC060RC50 - 50MHz 32-Bit M680x0 MPU, 206-PGA | Freescale
MC68LC060RC50

MC68LC060RC50 - 50MHz 32-Bit M680x0 MPU, 206-PGA | Freescale

The Freescale (formerly Motorola) MC68LC060RC50 is a 32-bit superscalar microprocessor from the M680x0 family, operating at 50 MHz and packaged in a 206-pin PGA (47.25x47.25 mm). It is the 'LC' (Low-Cost) variant of the MC68060, integrating a 8 KB instruction cache, 8 KB data cache, and an integer/floating-point execution core while omitting the MMU present on the full MC68060. The 'R' package suffix designates the ceramic PGA pin grid array form factor. A microprocessor (MPU) is a single-chip CPU that integrates control, arithmetic, logic, and memory-management units. The 68k lineage (M680x0) is a CISC architecture notable for orthogonal addressing modes, flat 32-bit registers, and a clean programmer's model. Within the broader taxonomy, the MC68LC060 sits at: MPU -> CISC microprocessor -> 32-bit embedded processor -> legacy industrial controller. It belongs to the last generation of mainstream 68k silicon and remains in service in legacy VME boards, avionics, industrial PLCs, and Amiga/Atari accelerator projects. Key specifications include a 50 MHz clock, 3.3 V core supply (the 'RC' speed grade), 32-bit address and data buses, dual 8 KB on-chip caches, a Burst mode memory interface, and a 206-pin PGA footprint. The superscalar dual-issue pipeline can execute up to two instructions per clock, giving an effective throughput of 60-80 MIPS at 50 MHz. The 'LC' suffix specifically indicates that the Memory Management Unit (MMU) has been removed, simplifying software for embedded control applications that run flat memory models. Architecturally, the MC68LC060 uses a Harvard-style split cache with write-back policy, a four-stage integer pipeline, and a dedicated FPU pipeline for 80-bit extended precision. The bus interface supports both asynchronous and burst-mode SRAM/DRAM, with on-chip bus arbitration for multi-processor configurations. Compared to the MC68040, the MC68LC060 delivers roughly 2x integer performance at the same clock thanks to its dual-issue pipeline. Typical applications include VMEbus single-board computers, embedded industrial controllers, legacy telecom switching equipment, military/aerospace retrofit programs, and retro-computing accelerator cards (Amiga 4000, Atari Falcon). Designers choose this MPU when upgrading a 68k-based platform that does not require the MMU, gaining performance without software rework on flat-memory RTOS kernels. When designing with the MC68LC060RC50, note that the 206-pin PGA requires a through-hole socket (e.g., PGA206 machined-pin socket) and substantial PCB real estate. The 3.3 V supply must be clean and decoupled with bulk + ceramic capacitors at each Vcc pin cluster. Designers migrating from MC68EC060 should verify software compatibility, as the LC variant retains the FPU while the EC variant does not. This page consolidates distributor pricing, drop-in MPU alternatives, and practical hardware design notes that go beyond the manufacturer datasheet, helping procurement and embedded engineers evaluate lifecycle risk and second-source options for this long-lifecycle Motorola/Freescale 68k MPU.

견적 요청 문의하기
MC68LC060RC75 - 75MHz M68060 MPU w/ MMU, No FPU | Freescale/NXP
MC68LC060RC75

MC68LC060RC75 - 75MHz M68060 MPU w/ MMU, No FPU | Freescale/NXP

The Freescale (NXP) MC68LC060RC75 is a 32-bit M680x0 microprocessor operating at 75 MHz, supplied in a 206-pin CPGA (47.25 x 47.25 mm) package and rated for approximately 5V operation. The 'LC' suffix indicates that the part includes the memory management unit (MMU) and on-chip caches but does not include the integrated floating-point unit (FPU) found on the full MC68060, providing a cost-optimized variant for embedded designs where floating point is handled in software or offloaded to a companion coprocessor. The device is part of the M68060 family that succeeded the MC68040 and introduced superscalar dual-issue out-of-order execution on the classic 68k instruction set. An MPU (microprocessor unit) is a CPU integrated circuit that forms the central processing core of an embedded computing system; the MC68LC060 belongs to the M68000 (68k) family, a CISC architecture historically dominant in early Apple Macintosh, Amiga, Atari ST, and early Sun workstations. In modern taxonomy it sits between a microcontroller (which integrates peripherals) and a microprocessor (which relies on external memory and glue logic), and it is classed as a power-management-adjacent processor IC because its static CMOS design allows clock-throttling for low-power operation. Key features include 75 MHz clock speed, 8 KB instruction cache plus 8 KB data cache, an integrated MMU for virtual-memory operating systems, a burst-mode bus interface, and hardware support for unaligned memory access. The 206-pin ceramic PGA package is the original through-hole form factor used on classic computing motherboards and aftermarket accelerator boards, and it is still sought by retro-computing restorers. Typical applications include legacy 68k system upgrades (Amiga 4000 / 1200 accelerators, Atari Falcon accelerators), industrial controllers requiring deterministic execution, telecom line-card processors, and military/aerospace platforms with long lifecycles where software re-validation cost dominates. The lack of FPU is advantageous in deterministic code paths that must avoid FP state save/restore latency. Forth 68k, AmigaOS, and NetBSD still actively target this silicon, and supply has moved to brokers and franchised distributors as the part is past its primary production window. Engineers planning new designs should verify long-term supply and consider pairing with modern Freescale ColdFire or NXP Layerscape MPUs for green-field projects.

견적 요청 문의하기
MC68LC060ZU66 - 32-Bit 66MHz 68060 MPU | NXP Semiconductors
MC68LC060ZU66

MC68LC060ZU66 - 32-Bit 66MHz 68060 MPU | NXP Semiconductors

The NXP (formerly Motorola/Freescale) MC68LC060ZU66 is a 32-bit reduced-pin-count version of the MC68060 microprocessor in the M680x0 family, operating at 66 MHz, fabricated with 2.5 million transistors and housed in a 304-pin TBGA (Thermal Ball Grid Array) package measuring 31x31 mm. The MC68LC060ZU66 integrates a high-performance integer pipeline, dual-issue superscalar execution, branch cache, an integrated FPU (floating-point unit), 8 KB unified instruction/data cache, and a memory management unit. A microprocessor (MPU) is the central processing unit of an embedded computing system that executes instructions, manages data flow, and orchestrates peripheral activity. As an M68000-family part, the MC68LC060ZU66 inherits full backward object-code compatibility with the MC68000, MC68020, MC68030, and MC68040 instruction sets, positioning it within the CISC/RISC-hybrid computing hierarchy that ranges from microcontroller to full application processor. The MC68LC060ZU66 belongs to the 'LC' sub-family, meaning it omits the on-chip MMU present in the full MC68060 while retaining the FPU, making it suited to embedded real-time control workloads where memory protection is implemented externally or not required. Key features of the MC68LC060ZU66 include 66 MHz core frequency, 3.3 V supply operation, branch prediction via a 256-entry branch cache, dual integer execution units, an on-chip FPU with concurrent FPU/integer execution, and 8 KB unified instruction/data cache. The 304-TBGA package provides high-density interconnect for a 32-bit address/data bus plus control and power pins in a 31x31 mm footprint, suitable for industrial-temperature embedded designs. Architecturally, the MC68LC060 employs a deep instruction pipeline with dual-issue superscalar execution of simple integer operations, dramatically increasing throughput versus earlier M68000 parts. The branch cache and integrated FPU make this processor well-suited to numerically intensive embedded applications, while the TBGA package supports high-speed signal integrity at 66 MHz bus frequencies. Typical applications include industrial automation controllers, aerospace/defense avionics, telecommunications switching equipment, high-performance embedded control, legacy VMEbus systems, and motor-control platforms where full software compatibility with the M68000 toolchain is mandatory. The 'LC' variant is favored where a memory management unit is unnecessary or provided by an external companion ASIC. When designing with this device, allocate four PCB layers minimum to route the 304-ball TBGA escape pattern, and follow Motorola application-note AB-14 guidelines for M68000 bus-termination and decoupling to maintain signal integrity at 66 MHz bus speeds. The 3.3 V core supply requires bulk decoupling within 25 mm of the package. This page synthesizes distributor pricing, parametric alternatives, and design guidance not found in the manufacturer datasheet alone, supporting fast component evaluation for engineers maintaining or designing M68000-family systems.

견적 요청 문의하기
MC68LC302AF16CT - 16MHz 68K Multiprotocol Processor | NXP | 100-LQFP
MC68LC302AF16CT

MC68LC302AF16CT - 16MHz 68K Multiprotocol Processor | NXP | 100-LQFP

The NXP (formerly Freescale/Motorola) MC68LC302AF16CT is a low-cost, integrated multiprotocol processor (IMP) that pairs a static M68000 8/16-bit core with a flexible RISC-based Communications Processor Module (CPM), operating at 16MHz in a 100-pin LQFP (14x14mm) package. It is the cost-reduced derivative of the well-known MC68302, integrating an on-chip DMA controller, serial communications channels, and DRAM refresh support for networking and telecom equipment designs. An MPU (Microprocessor Unit) is a CPU-centric processor that integrates arithmetic logic, registers, and control logic with optional on-chip peripherals. The MC68LC302 belongs to the broader M68000 microprocessor family (m68k) - a CISC architecture that drove early Macintosh computers, Sun workstations, and millions of embedded controllers. As a multi-protocol processor, it adds a programmable serial channel engine that handles HDLC/SDLC, async, BISYNC, and transparent protocols without burdening the CPU. Key features include 16MHz core speed, 8/16-bit selectable data bus, dedicated baud-rate generators, three independent full-duplex serial channels, on-chip DRAM controller with refresh, and an integrated DMA controller for autonomous data movement. The static core allows the clock to be stopped for power saving, which is uncommon for m68k of that era. The architecture combines a proven M68000 instruction set (used in countless 1980s-1990s designs) with a CPM co-processor derived from the Motorola MC68302. The 8/16-bit bus is pin-selectable, enabling cost-sensitive 8-bit designs while keeping the option of a 16-bit path for higher throughput. 16MHz delivers roughly 2 MIPS of 68000 integer performance. Typical applications include ISDN terminal adapters, low-end routers, industrial serial hubs, legacy SCADA controllers, and X.25/frame-relay bridges. Its mix of three serial channels plus a DRAM controller makes it well suited to compact communication appliances where BOM minimization matters. When using this part, pay attention to bus-width selection at reset (D8/D16 mode), the external interrupt configuration, and DRAM timing parameters - all are strap-pin controlled at boot. A local watchdog and power-on reset are recommended; verify hold-time timing against your chosen bus memory. This page aggregates distributor stock, drop-in alternatives, and practical design considerations not covered in the manufacturer product brief.

견적 요청 문의하기
MC68LC302AF16VCT - 16MHz 68K MPU w/ Comm, 100-LQFP | NXP
MC68LC302AF16VCT

MC68LC302AF16VCT - 16MHz 68K MPU w/ Comm, 100-LQFP | NXP

The NXP MC68LC302AF16VCT is an integrated M68000-family microprocessor (MPU) with an on-chip RISC Communications Processor Module (CPM), designed for networking and serial-communications products. The die integrates a 16 MHz MC68000 core, dual DMA channels, a DRAM controller, and a multi-channel CPM (Serial Communications Controller) that drives HDLC/SDLC, UART, and transparent serial channels. It is packaged in a 100-pin LQFP (14x14 mm, tray). An MPU (microprocessor unit) is the central processing element of an embedded system. Unlike a microcontroller, an MPU relies on external memory and peripherals. The 68K (MC68000) architecture is a classic CISC ISA widely used in telecom, industrial control, and aerospace legacy designs. The 68302 family extends this with a closely-coupled CPM that offloads serial and DMA work from the CPU, placing it in the taxonomy: microprocessor -> 68K MPU -> integrated communications processor -> embedded networking IC. Key features include a 16.67 MHz MC68000 core (1 Core, 8/16-bit internal bus), an RISC CPM for serial/DMA, dual DMA channels (2 IDMA), 1152 bytes of dual-port RAM, and on-chip DRAM refresh controller. The serial interface supports three SCC (Serial Communications Controller) ports plus one SCP port. Operating voltage is 5V typical; the device runs from -40C to +85C. Typical applications include legacy industrial routers, ISDN terminal adapters, X.25/frame-relay switches, embedded serial-comm controllers, and telecom glue-logic replacement. The integrated CPM reduces BOM count versus a CPU + external UART/DMA design. Designers should note the 100-LQFP footprint requires thermal attention at high ambient temperatures. Pin-compatible 68302 variants (full, LC, FU) allow memory-size scaling on the same land pattern.

견적 요청 문의하기