마이크로컨트롤러

제품 (18691)

ATSAM3X4CA-AUR - 84MHz Cortex-M3 MCU 256KB Flash | Microchip
ATSAM3X4CA-AUR

ATSAM3X4CA-AUR - 84MHz Cortex-M3 MCU 256KB Flash | Microchip

The Microchip Technology ATSAM3X4CA-AUR is a 32-bit ARM Cortex-M3 microcontroller running at 84 MHz with 256 KB (256K x 8) of embedded Flash memory, housed in a 100-pin LQFP (14 x 14 mm) surface-mount package. A microcontroller unit (MCU) integrates a processor core, program memory, data memory, and a rich set of peripherals onto a single silicon die, forming the heart of an embedded system. Within the semiconductor hierarchy, the ATSAM3X4CA-AUR belongs to the SAM3X family of ARM Cortex-M3-based flash microcontrollers, under the broader categories of 32-bit MCUs, embedded processors, and integrated circuits. Microchip (which acquired Atmel, the original SAM3X designer) positions this family for applications needing significant processing headroom, connectivity, and analog integration. Key features of the ATSAM3X4CA-AUR include the 84 MHz Cortex-M3 core delivering 1.25 DMIPS/MHz performance, 256 KB of Flash program memory, flexible supply operation from 1.62 V minimum (nominally 1.8 V, 2.5 V, or 3.3 V rails), and a Green Industrial temperature rating suitable for demanding industrial environments. The device integrates USB connectivity and a multi-source interrupt controller typical of the SAM3X architecture. Architecturally, the Cortex-M3 core combines a 3-stage pipeline with a Harvard bus structure, a nested vectored interrupt controller (NVIC) for deterministic low-latency interrupts, and a Thumb-2 instruction set that balances code density with performance. Flash memory is tightly coupled to the core for zero-wait-state execution in many access patterns, supporting real-time control loops. Typical applications include industrial automation and control nodes, 3D printers and motion control systems, consumer devices requiring USB connectivity, and embedded instrumentation. The Arduino Due development platform popularized the SAM3X family, giving this device a large ecosystem of libraries and reference designs. Design consideration: the device requires a 1.62 V minimum supply, so verify brown-out behavior on 3.3 V rails with high transient loads, and follow Microchip layout guidance for the LQFP-100 decoupling network. This page synthesizes distributor pricing, drop-in same-family alternatives, and practical design notes not found in the manufacturer datasheet.

견적 요청 문의하기
ATSAM3X4CA-CU - 84MHz Cortex-M3 MCU 256KB Flash | Microchip
ATSAM3X4CA-CU

ATSAM3X4CA-CU - 84MHz Cortex-M3 MCU 256KB Flash | Microchip

The Microchip Technology ATSAM3X4CA-CU is a 32-bit ARM Cortex-M3 flash microcontroller running at 84 MHz with 256KB (256K x 8) of embedded flash memory, housed in a 100-ball TFBGA (9x9 mm) package. A microcontroller (MCU) integrates a processor core, memory, and peripherals on a single chip, forming the computational heart of embedded systems. The ATSAM3X4CA-CU belongs to the SAM3X family within Microchip's ARM-based SAM3 line, sitting in the hierarchy: ARM Cortex-M3 -> 32-bit flash MCU -> embedded microcontroller -> semiconductor device. Its Cortex-M3 revision 2.0 core implements the Thumb-2 instruction set, includes a Memory Protection Unit (MPU) and a 24-bit SysTick counter, and uses a Nested Vector Interrupt Controller for deterministic interrupt handling. Key features include 84 MHz core speed, 256KB on-chip flash, and rich connectivity: CAN, Ethernet, I2C, IrDA, LIN, MMC, SPI, and SSC serial audio interface. Ethernet and dual CAN make it unusually well equipped for networked industrial nodes, while the SSC targets audio and telecom peripherals. Architecturally, the device operates from a low 1.8V-class supply (per distributor listings, 1.8V core with 3.3V I/O) in an industrial temperature grade. The green, MRL A qualified BGA100 packaging supports lead-free surface-mount assembly, and the 9x9 mm ball grid array saves board area versus 100-pin QFP alternatives while improving signal integrity for high-speed peripherals. Typical applications include industrial automation and PLC nodes, Ethernet-connected gateways and IoT edge devices, motor control and CAN networking equipment, and consumer or embedded control boards such as Arduino Due-class platforms built on the SAM3X family. When designing with this device, plan power sequencing and decoupling for the 100-ball BGA: use a solid ground plane under the array and verify that your assembly partner supports 0.8 mm-pitch BGA reflow. Budget flash usage carefully, as the 256KB density is fixed within the family package footprint. This page synthesizes distributor pricing availability, drop-in family alternatives, and practical design guidance not consolidated in the manufacturer datasheet.

견적 요청 문의하기
ATSAM3X4EA-AU - 84MHz Cortex-M3 MCU 256KB Flash | Microchip
ATSAM3X4EA-AU

ATSAM3X4EA-AU - 84MHz Cortex-M3 MCU 256KB Flash | Microchip

The Microchip Technology ATSAM3X4EA-AU is a 32-bit ARM Cortex-M3 flash microcontroller running at up to 84 MHz with 256 KB (256K x 8) of embedded Flash memory and 144-pin LQFP (20x20 mm) surface-mount package. It is a member of the SAM3X family, which integrates a high-speed USB device/port with an on-chip transceiver, dual CAN controllers, Ethernet MAC, and a rich analog and connectivity peripheral set. A 32-bit microcontroller (MCU) is an integrated circuit that combines a processor core, memory, and programmable peripherals on a single chip, forming the highest-volume class of embedded processors. Within the hierarchy of ARM-based flash MCUs, the SAM3X sits in Microchip (formerly Atmel) AT91SAM mid-range tier: ARM Cortex-M3 core -> AT91SAM ARM-based Flash MCU -> 32-bit embedded microcontroller -> semiconductor. Key features include the ARM Cortex-M3 revision 2.0 core with Memory Protection Unit (MPU), Thumb-2 instruction set, 24-bit SysTick counter, and Nested Vector Interrupt Controller (NVIC). Connectivity spans CAN, EBI/EMI external bus, Ethernet MAC, I2C, IrDA, LIN, and MMC/SD, plus USB high-speed for fast data up/downloading with robust EMI tolerance. Industrial temperature support (GREEN IND TEMP grade per Mouser) makes it suitable for extended environments. Technical depth: the Cortex-M3 core at 84 MHz delivers approximately 1.25 DMIPS/MHz deterministic interrupt handling, while the multi-layer bus matrix allows parallel access to Flash, SRAM, and peripherals. Two 2x128 KB flash banks per the digichips listing reflect dual-bank architecture enabling simultaneous code execution and programming. Typical applications include 3D printers, industrial automation, networked CAN/Ethernet gateways, and USB-connected embedded systems where high-speed USB plus CAN coexistence is required. Design consideration: the LQFP-144 20x20 mm footprint requires careful decoupling on multiple VDDIO/VDDCORE pins; use 100 nF ceramic capacitors at each supply pin pair. This page synthesizes verified distributor data, drop-in alternatives, and practical design notes not found in the manufacturer datasheet.

견적 요청 문의하기
ATSAM3X4EA-CU - 84MHz Cortex-M3 MCU, 256KB Flash | Microchip
ATSAM3X4EA-CU

ATSAM3X4EA-CU - 84MHz Cortex-M3 MCU, 256KB Flash | Microchip

The Microchip Technology ATSAM3X4EA-CU is a 32-bit ARM Cortex-M3 flash microcontroller running at up to 84 MHz with 256KB (256K x 8) of embedded Flash memory, delivered in a 144-ball LFBGA (13 x 13 mm) surface-mount package. A microcontroller (MCU) is a single-chip computer integrating a processor core, program memory, data memory, and a rich set of peripherals onto one silicon die. Within the power management IC and semiconductor hierarchy, MCUs sit at the heart of embedded systems, executing real-time control, communication, and human-interface tasks. The SAM3X/A family belongs to Microchip (formerly Atmel) ARM-based flash MCU portfolio, positioned above the smaller SAM3N series and alongside the USB-capable SAM3U series. Key features of the ATSAM3X4EA-CU include the ARM Cortex-M3 revision 2.0 core with Thumb-2 instruction set, a Memory Protection Unit (MPU), a 24-bit SysTick timer, and Nested Vectored Interrupt Controller (NVIC) for deterministic interrupt handling. Connectivity peripherals span CAN, EBI/EMI external bus, Ethernet MAC, I2C, IrDA, LIN, and MMC/SD interfaces, making the device a strong fit for multi-protocol industrial nodes. The CMOS process platform delivers efficient power performance for always-on embedded applications. Technically, the Cortex-M3 architecture provides 32-bit RISC throughput with low interrupt latency, while the peripheral DMA channels offload the CPU in high-bandwidth data paths such as Ethernet framing or CAN message queues. The industrial temperature grade (suffix -CU, green package, MRL A) supports harsh-environment deployment. Typical applications include industrial automation controllers, CAN/Ethernet gateways, embedded networking equipment, test instruments, and motor control systems that require 32-bit compute with extensive communication interfaces. A key design consideration is supply voltage: the device operates from a nominal 1.8 V core-class supply per distributor listings, so verify the exact I/O and VDDCORE ranges in the manufacturer datasheet before finalizing the power tree. This page synthesizes distributor pricing, drop-in family alternatives, and practical design notes not found in the manufacturer datasheet alone.

견적 요청 문의하기
ATSAM3X8CA-AU - 84MHz Cortex-M3 MCU 512KB Flash | Microchip
ATSAM3X8CA-AU

ATSAM3X8CA-AU - 84MHz Cortex-M3 MCU 512KB Flash | Microchip

The Microchip Technology ATSAM3X8CA-AU is a 32-bit ARM Cortex-M3 flash microcontroller running at up to 84 MHz with 512 KB of Flash memory (organized as 2 x 256 KB banks) and 96 KB of SRAM (64 KB + 32 KB banks), housed in a 100-pin LQFP (14 x 14 mm) package. A microcontroller (MCU) is a single integrated circuit that combines a processor core, memory, and peripherals to serve as the brain of an embedded system. The ATSAM3X8CA-AU belongs to the SAM3X/A family, part of the broader ARM Cortex-M based 32-bit microcontroller class within Microchip's SMART ARM-based MCU portfolio, sitting above 8-bit AVR MCUs and alongside Cortex-M4 SAM4 parts. Key features include the ARM Cortex-M3 revision 2.0 core with Thumb-2 instruction set, a Memory Protection Unit (MPU), a 24-bit SysTick counter, and Nested Vectored Interrupt Controller (NVIC). Integrated high-speed USB with an on-chip transceiver enables fast data up/downloading, and the dual-bank Flash architecture supports safe in-application firmware updates. Connectivity is comprehensive: CAN, Ethernet MAC, I2C (TWI), IrDA, LIN, MMC/SDIO, SPI, SSC, UART, and USB. Rich analog and timing peripherals make the device suitable for complex control and communication nodes. This exact silicon is best known as the MCU of the Arduino Due board, giving it a very large ecosystem of code, libraries, and community support. Typical applications include industrial automation and control, CAN/Ethernet networking nodes, 3D printers, motor control, data loggers, and USB-connected instruments. Design consideration: the dual 256 KB Flash banks allow read-while-write operation for bootloader strategies, but Flash wait states increase at 84 MHz, so code performance tuning via the cache/acceleration layer is worthwhile. This page adds value beyond the datasheet by synthesizing distributor pricing tiers, drop-in same-family alternatives, practical design notes, and an Arduino Due ecosystem context not found on typical product pages.

견적 요청 문의하기
ATSAM3X8CA-CU - 84MHz Cortex-M3 MCU, 512KB Flash | Microchip
ATSAM3X8CA-CU

ATSAM3X8CA-CU - 84MHz Cortex-M3 MCU, 512KB Flash | Microchip

The Microchip Technology ATSAM3X8CA-CU is a 32-bit ARM Cortex-M3 flash microcontroller running at 84 MHz with 512KB (512K x 8) of flash memory and 96KB of SRAM, housed in a 100-ball TFBGA (9x9 mm) package. A microcontroller unit (MCU) is a single-chip embedded computer that integrates a processor core, non-volatile program memory, RAM, and a rich set of peripherals onto one die. The SAM3X family sits within Microchip's (formerly Atmel's) 32-bit SAM MCU hierarchy, positioned above the entry-level SAM3N/SAM3S families by adding Ethernet MAC, CAN controllers, and a USB device port for connected embedded systems. Key features include the ARM Cortex-M3 revision 2.0 core with Thumb-2 instruction set, a Memory Protection Unit (MPU), a 24-bit SysTick timer, and a Nested Vector Interrupt Controller (NVIC). Connectivity spans CAN, Ethernet, I2C (TWI), IrDA, LIN, MMC/SD, SPI, SSC, UART, and USB, making this part a single-chip networking and control hub. The 512KB flash is organized as two 256KB banks supporting dual-bank flash operations. Technical depth: the Cortex-M3 pipeline is optimized for interrupt-driven control code, with deterministic exception handling suited to industrial communication stacks such as CANopen and EtherCAT-adjacent protocols. The two-bank flash architecture allows firmware management schemes, while the MPU supports RTOS-based designs requiring memory isolation between tasks. Typical applications include industrial automation and control nodes, embedded Ethernet/CAN gateways, and USB-connected instrumentation. Notably, this MCU family powers the Arduino Due development board, giving it an extensive open-source software ecosystem. Design consideration: the 100-ball TFBGA package requires controlled-impedance PCB layout with via-in-pad or escape routing; plan at least a six-layer or well-planned four-layer board for the Ethernet and USB interfaces. This page synthesizes distributor pricing, drop-in alternatives, and practical design notes not found in the manufacturer datasheet.

견적 요청 문의하기
ATSAM3X8EA-AU - 84MHz Cortex-M3 MCU, 512KB Flash | Microchip
ATSAM3X8EA-AU

ATSAM3X8EA-AU - 84MHz Cortex-M3 MCU, 512KB Flash | Microchip

The Microchip Technology ATSAM3X8EA-AU is a 32-bit ARM Cortex-M3 flash microcontroller running at up to 84 MHz with 512 KB (512K x 8) of embedded Flash and 100 KB of SRAM, housed in a 144-pin LQFP (20 x 20 mm) package. A microcontroller unit (MCU) is a single integrated circuit that combines a processor core, memory, and peripherals into one chip, forming the highest-volume class of embedded processors. The SAM3X/A series belongs to the ARM Cortex-M based Flash MCU family, which sits within the broader hierarchy of 32-bit RISC embedded processors used throughout industrial, consumer, and automotive electronics. Microcontrollers like this one execute deterministic real-time control code while managing communication, sensing, and actuation peripherals on-chip. Key features include the ARM Cortex-M3 revision 2.0 core with Memory Protection Unit (MPU), Thumb-2 instruction set, 24-bit SysTick counter, and Nested Vector Interrupt Controller. The 512 KB Flash uses a 128-bit wide access with a memory accelerator and dual-bank architecture, while the 100 KB SRAM is split into dual banks. Rich connectivity includes CAN, EBI/EMI, Ethernet MAC, I2C (TWI), IrDA, LIN, and MMC/SD card interfaces. Analog capability comprises a 16-channel 12-bit ADC and 2-channel 12-bit DAC. Operating from a 1.62V to 3.6V supply (1.8V/2.5V/3.3V rails), the ATSAM3X8EA-AU is the exact MCU used on the Arduino Due, making it highly accessible to embedded developers. Dual-bank Flash supports safe in-application firmware updates. Typical applications include industrial automation and motor control, IoT gateways and networking equipment, and 3D printer or robotics controller boards. The Ethernet MAC and dual CAN controllers make it particularly well suited to industrial communication nodes. Design consideration: for Ethernet operation, supply from a clean 3.3V rail and follow the datasheet decoupling guidance on the 144-LQFP, using at least a four-layer PCB with a solid ground plane for analog peripherals. This page synthesizes distributor pricing, drop-in family alternatives, and practical design guidance not found on standard datasheet portals, as of 2026-09-20.

견적 요청 문의하기
ATSAM3X8EA-CU - ARM Cortex-M3 84MHz MCU 512KB Flash | Microchip
ATSAM3X8EA-CU

ATSAM3X8EA-CU - ARM Cortex-M3 84MHz MCU 512KB Flash | Microchip

The Microchip Technology ATSAM3X8EA-CU is a 32-bit ARM Cortex-M3 flash microcontroller running at up to 84 MHz, with 512KB of Flash memory and 100KB of SRAM, housed in a 144-ball BGA (13 x 13 mm) package. A microcontroller (MCU) is a single integrated circuit that combines a processor core, program memory, data memory, and peripherals into one chip, forming the lowest layer of the embedded system hierarchy (MCU -> system-on-chip -> embedded processor -> semiconductor device). The SAM3X/A series belongs to Microchip's (formerly Atmel) ARM-based Flash MCU family, based on the high-performance ARM Cortex-M3 RISC processor with the Thumb-2 instruction set. Key features include dual-bank 2 x 256KB Flash memory enabling safe in-application programming, a Memory Protection Unit (MPU) for robust firmware partitioning, a 24-bit SysTick counter, and a Nested Vector Interrupt Controller (NVIC) for deterministic interrupt handling. The connectivity portfolio is a major strength: the device integrates CAN, Ethernet (MAC), EBI/EMI external bus interface, I2C, IrDA, LIN, MMC/SD, SPI, UART and USB peripherals, plus a NAND Flash Controller (NFC) with an additional 4KB of dedicated SRAM. Rich analog and timer peripherals make it suitable for motor control and data acquisition. Typical applications include 3D printer mainboards (the same core powers the well-known Arduino Due), industrial automation controllers, Ethernet/CAN gateways, and embedded networking equipment. Design-wise, plan the Flash dual-bank layout for OTA updates and allow margin on the 3.3V supply rail for the 1.62V to 3.6V operating envelope; BGA-144 assembly requires X-ray inspection capability. This page synthesizes distributor pricing, drop-in alternatives within the SAM3X family, and practical design notes not found in the manufacturer datasheet, as of 2026-09-20.

견적 요청 문의하기
ATSAM4C16CA-AU - Dual Cortex-M4 120MHz 1MB MCU | Microchip
ATSAM4C16CA-AU

ATSAM4C16CA-AU - Dual Cortex-M4 120MHz 1MB MCU | Microchip

The Microchip Technology ATSAM4C16CA-AU is a 32-bit dual-core ARM Cortex-M4 flash microcontroller with 1MB (1M x 8) flash memory, 120MHz maximum CPU speed, and a 74-I/O 100-LQFP (14x14 mm) surface-mount package. A microcontroller (MCU) is a single integrated circuit that combines a processor core, program memory, data memory, and peripherals into one chip, forming the highest-volume segment of the embedded systems and power management IC hierarchy. The SAM4C family extends Microchip's (formerly Atmel) ARM-based SAM line by pairing two Cortex-M4 cores in one device, allowing one core to run the main application while the second handles communication, math acceleration, or safety tasks. Key features of the ATSAM4C16CA include the 32-bit dual-core Cortex-M4 architecture with DSP and floating-point extension, 120MHz operating frequency, 1MB embedded flash, connectivity peripherals including EBI/EMI external bus, I2C, IrDA, SPI, and UART/USART, plus brown-out detect/reset, DMA, LCD controller, POR, PWM, and watchdog timer peripherals. The dual-core CM4F implementation enables true parallel processing: each core executes SIMD and hardware FPU instructions, useful for motor control algorithms, cryptography, and digital signal processing without a separate DSP. Program memory is organized as 1M x 8 flash, and the device operates from a 1.2V/3.3V supply per distributor specification data. Typical applications include industrial automation, motor control with encoder feedback, LCD-based human-machine interfaces leveraging the integrated LCD controller, and communication-intensive IoT gateways using multiple UART/USART channels. Design consideration: verify flash density and I/O count against the pin-compatible SAM4C siblings (ATSAM4C8CA at 512KB, ATSAM4C32CA at 2MB) since the 100-LQFP footprint allows same-board memory migration. This page synthesizes distributor pricing, drop-in alternatives, lifecycle status, and practical design notes not found in the manufacturer datasheet.

견적 요청 문의하기
ATSAM4C16CA-AUR - Dual-Core 120MHz 1MB Flash MCU | Microchip
ATSAM4C16CA-AUR

ATSAM4C16CA-AUR - Dual-Core 120MHz 1MB Flash MCU | Microchip

The Microchip Technology ATSAM4C16CA-AUR is a 32-bit dual-core ARM Cortex-M4 (with FPU, Cortex-M4F) microcontroller from the SAM4C smart-energy series, running at 120 MHz with 1 MB (1M x 8) embedded flash, 128 KB SRAM, and a supply range of 1.62 V to 3.6 V, housed in a 100-pin LQFP (14 x 14 mm) green industrial-temperature package supplied on tape and reel. A microcontroller (MCU) is a single-chip embedded computer that integrates a processor core, program memory (flash), data memory (SRAM), and a rich set of peripherals onto one die, sitting at the lowest level of the embedded-system hierarchy below SoCs and application processors. The SAM4C family is Microchip's (formerly Atmel's) ARM-based line targeted specifically at smart energy and dual-core control applications. Key differentiating features include the true dual-core architecture - two independent 120 MHz Cortex-M4F cores that can partition secure metering firmware from application code - plus 1 MB of on-chip flash for feature-rich metering firmware and 128 KB of SRAM for buffering and protocol stacks. The 120 MHz maximum core speed delivers approximately 150 DMIPS-class performance, and the hardware FPU accelerates floating-point DSP math used in energy measurement algorithms. Architecturally, the SAM4C implements a dual-core system designed for smart energy meters: one core can run application/UI tasks while the second core handles security-critical metrology, supporting firmware partitioning that is difficult to retrofit onto single-core MCUs. Peripherals include serial interfaces (UART, SPI, I2C/TWI), timers, and analog blocks typical of the SAM4 series (full peripheral set detailed in the manufacturer datasheet). Typical applications include smart electricity meters, smart-grid nodes, industrial control panels, and secure connected devices where dual-core separation and 1 MB of flash headroom justify the SAM4C selection. A key design consideration is power integrity: at 120 MHz dual-core operation, ensure the 1.62-3.6 V supply rail is decoupled with low-ESR ceramics at every VDD pin pair, and confirm flash wait-state settings against the 120 MHz maximum clock per the datasheet. This page synthesizes verified distributor data, drop-in alternatives, and practical design notes not found in the manufacturer datasheet.

견적 요청 문의하기
ATSAM4C16CB-AU - Dual Cortex-M4 120MHz 1MB MCU | Microchip
ATSAM4C16CB-AU

ATSAM4C16CB-AU - Dual Cortex-M4 120MHz 1MB MCU | Microchip

The Microchip Technology ATSAM4C16CB-AU is a 32-bit dual-core ARM Cortex-M4/M4F microcontroller running at 120 MHz with 1 MB (1M x 8) embedded Flash, 152 KB SRAM, and per-core cache, housed in a 100-pin LQFP (14x14 mm) package. A microcontroller (MCU) is a single-chip computer integrating a processor core, program memory, data memory, and peripherals. The SAM4C family sits within the wider ARM Cortex-M-based microcontroller hierarchy (MCU -> 32-bit MCU -> ARM Cortex-M4 MCU), positioning it as a system-on-chip for smart energy and industrial control systems that require two independent processing cores in one package. Key features include a dual-core architecture with one Cortex-M4 with FPU and a second Cortex-M4 processor, enabling partitioned applications such as metering computation plus communication. The 1 MB Flash supports large firmware images and OTA update dual-bank schemes. The 1.62V to 3.6V supply range suits battery and mains-powered meters, and the industrial temperature offering supports harsh deployment environments. Technical depth: each core runs up to 120 MHz with on-chip cache, improving Flash execution efficiency. Per Microchip product data, the device integrates peripherals targeted at energy metering, including serial connectivity and analog interfaces, allowing one chip to host metrology plus protocol stacks. Typical applications include smart electricity meters, smart energy gateways, industrial automation controllers, and dual-channel sensor processing where the second core offloads real-time tasks. Design consideration: at 120 MHz, supply decoupling and a clean 3.3V rail are essential; plan Flash partitioning early to exploit dual-core task isolation. This page synthesizes distributor pricing, same-package alternatives, and practical design notes not found in the manufacturer datasheet, adding value beyond spec listings.

견적 요청 문의하기
ATSAM4C16CB-AUR - Dual-Core Cortex-M4 120MHz MCU 1MB Flash | Microchip
ATSAM4C16CB-AUR

ATSAM4C16CB-AUR - Dual-Core Cortex-M4 120MHz MCU 1MB Flash | Microchip

The Microchip Technology ATSAM4C16CB-AUR is a 32-bit dual-core ARM Cortex-M4 microcontroller IC operating at up to 120 MHz with 1 MB (1M x 8) of embedded Flash memory, housed in a 100-pin LQFP (14x14 mm) surface-mount package. It belongs to the SAM4C family, a system-on-chip solution purpose-built for smart energy applications. A microcontroller (MCU) is a complete computing system on a single chip, combining a processor core, memory, and peripherals. Within the power-management hierarchy, the SAM4C sits at the high end of Microchip's ARM Cortex-M-based smart metering portfolio, integrating two high-performance 32-bit Cortex-M4 processors so that one core can run the metering application while the other handles communication or security tasks. Key differentiating features include dual-core operation at 120 MHz per core, 1024 Kbytes of embedded Flash, integrated hardware cryptography (CRYPTO marked in distributor data), and industrial-grade temperature operation indicated by the -AUR suffix. The dual-core architecture enables true concurrent processing for smart metering SOC designs. Technically, the device uses the ARM Cortex-M4 RISC architecture with a supply interface supporting 1.2V/3.3V operation per distributor specification data. The LQFP-100 Green package supports MSL-rated reflow and tape-and-reel (T&R) delivery for automated assembly. Typical applications include smart energy meters, smart grid nodes, data concentrators, and industrial control systems where secure, concurrent dual-core processing is required. Design consideration: verify the 100-pin LQFP land pattern and decouple both core supply domains per the manufacturer datasheet. This page synthesizes distributor pricing, drop-in alternatives, and practical design notes not found in the manufacturer datasheet.

견적 요청 문의하기
ATSAM4C32CA-AU - Dual-Core 120MHz 2MB Flash MCU | Microchip
ATSAM4C32CA-AU

ATSAM4C32CA-AU - Dual-Core 120MHz 2MB Flash MCU | Microchip

The Microchip Technology ATSAM4C32CA-AU is a 32-bit dual-core ARM Cortex-M4 (with FPU, Cortex-M4F) microcontroller operating at up to 120 MHz, integrating 2 MB (2M x 8) of embedded Flash memory, hardware cryptography, and a 100-pin LQFP (14x14 mm) package. A microcontroller (MCU) is a single-chip computer that combines a processor core, memory, and peripherals into one integrated circuit. Within the power-management hierarchy, the SAM4C family sits in Microchip's 32-bit SAM portfolio: microcontroller -> ARM Cortex-M based MCU -> system-on-chip (SoC) solution. The SAM4C32 is specifically architected as a SoC for smart energy applications such as electricity meters. Key differentiating features include the dual-core Cortex-M4/M4F architecture, which allows one core to run the metering application while the second core handles communication or security tasks; 2 MB of on-chip Flash for large firmware images with dual-bank boot strategies; and a hardware cryptographic engine (CRYPTO per Microchip product pages) supporting secure firmware and data handling. The 120 MHz maximum core speed with the Cortex-M4 DSP instructions and single-precision FPU supports FFT-based metering computations efficiently. Technical depth: the device operates from a 1.2V core / 3.3V I-O supply domain structure (per FindIC verified data), supports industrial temperature ranges (IND TEMP per Mouser), and is offered in Microchip's MRLA (material declaration, green) packaging with RoHS-green LQFP construction. The two processors enable partitioned designs where metrology accuracy and network stack latency are addressed independently. Typical applications include smart electricity meters, energy monitoring gateways, industrial control nodes, and secure IoT data concentrators, where dual-core partitioning and cryptographic acceleration directly reduce external component count. Design consideration: as a dual-core device, partition Flash and SRAM between cores early in the design and verify the supply sequencing of the 1.2V core domain against the 3.3V I-O domain in the power tree. This page synthesizes distributor pricing (as of 2026-09-20), drop-in same-family alternatives, pinout/package data, and practical design notes not consolidated in the manufacturer datasheet.

견적 요청 문의하기
ATSAM4C32CA-AUR - Dual Cortex-M4 120MHz 2MB Flash MCU | Microchip
ATSAM4C32CA-AUR

ATSAM4C32CA-AUR - Dual Cortex-M4 120MHz 2MB Flash MCU | Microchip

The Microchip Technology ATSAM4C32CA-AUR is a 32-bit smart-energy microcontroller with two ARM Cortex-M4 RISC processor cores running at up to 120 MHz, 2 Mbytes of embedded Flash, and a 100-pin LQFP package in industrial temperature grade with hardware cryptography. A microcontroller (MCU) is a system-on-chip that integrates a processor core, memory, and peripherals on a single die, sitting at the lowest level of the embedded-computing hierarchy above discrete logic and below application processors. The SAM4C family targets metering and smart-energy systems-on-chip, where two cores allow one processor to run the metrology/security stack while the other handles communications and UI. Key features include dual 32-bit ARM Cortex-M4 RISC cores with a maximum clock speed of 120 MHz, 2048 KB (2 MB) of embedded Flash, an integrated hardware crypto engine, and industrial temperature operation. The CA suffix denotes the variant with the second Cortex-M4 core plus cryptographic acceleration; the ATSAM4C32 family pairs this with rich analog and connectivity peripherals typical of the Atmel/Microchip SAM4C platform. Technically, the device belongs to the SAM4C series described by Microchip as a complete system-on-chip solution for smart-energy applications built around two high-performance 32-bit ARM Cortex-M4 processors. The 1.2 V core supply with 3.3 V I/O rails reflects a modern low-power process, while the 100-pin LQFP surface-mount package offers a 0.5 mm lead pitch suitable for automated assembly. Typical applications include electricity meters, smart grid nodes, data concentrators, and industrial monitoring endpoints where on-chip cryptography protects billing and firmware integrity. Design consideration: budget dual-core debug capacity and plan Flash partitioning between the two cores early, since the security/communication workload split strongly influences board-level power and EMC behavior. This page synthesizes distributor pricing, drop-in same-family alternatives, and practical design notes not found in the manufacturer datasheet alone.

견적 요청 문의하기
ATSAM4C32CA-AUT - Dual Cortex-M4 120MHz 2MB MCU | Microchip
ATSAM4C32CA-AUT

ATSAM4C32CA-AUT - Dual Cortex-M4 120MHz 2MB MCU | Microchip

The Microchip Technology ATSAM4C32CA-AUT is a 32-bit dual-core ARM Cortex-M4 microcontroller with 2 MB flash memory, 120 MHz maximum operating frequency, and cryptographic acceleration, housed in a 100-pin LQFP (14x14 mm) package for smart energy applications. A microcontroller (MCU) is a single integrated circuit that combines a processor core, memory (flash for program storage, SRAM for data), and peripherals such as UARTs, timers, and ADCs into one chip. Within the power management hierarchy, MCUs sit at the application level above simple logic ICs and below full application processors. The SAM4C series extends Microchip's SAM4 ARM Cortex-M4 family by pairing a primary Cortex-M4F with a second Cortex-M4 core, enabling functional partitioning in metering systems. Key features include dual 32-bit ARM Cortex-M4 RISC processors running at up to 120 MHz, 2 MB (2M x 8) of embedded flash, integrated crypto hardware (the -AUT device is listed with CRYPTO in distributor data), and industrial temperature qualification indicated by the Mouser listing descriptor "IND TEMP". These attributes let the part execute metrology computation on one core while handling communication or security on the other. Technically, the device is a system-on-chip solution purpose-built for smart energy applications according to Microchip's official ATSAM4C32 product page. The dual-core architecture reduces the need for an external security or communication co-processor in electricity meter designs. Typical applications include smart electricity meters, energy monitoring gateways, and industrial power-quality analyzers, where 2 MB of flash supports large firmware images plus OTA update staging. Design consideration: confirm the supply rail (3.3 V class, per the 3.3V listing in the datasheet archive data) and thermal budget before committing to the 100-LQFP footprint. This page synthesizes distributor pricing tiers, drop-in alternatives, and practical design notes not found in the manufacturer datasheet.

견적 요청 문의하기
ATSAM4C32CA-AUTR - Dual-Core 120MHz 2MB Flash MCU | Microchip
ATSAM4C32CA-AUTR

ATSAM4C32CA-AUTR - Dual-Core 120MHz 2MB Flash MCU | Microchip

The Microchip Technology ATSAM4C32CA-AUTR is a 32-bit dual-core ARM Cortex-M4 microcontroller running at 120 MHz with 2 MB of embedded flash memory, integrated cryptographic hardware acceleration, and an industrial-temperature LQFP-100 (14x14 mm) surface-mount package delivered in tape and reel format. Operating from a single 3.3V supply, it is engineered as a system-on-chip solution for smart energy and secure connected applications. A microcontroller (MCU) is a complete computing system on a single chip, combining a processor core, memory, and peripherals. Within the power-management hierarchy, the SAM4C family sits above simple single-core MCUs: it integrates two ARM Cortex-M4 RISC processors, allowing one core to run the main application while the second handles communication, metering calculations, or security tasks, effectively replacing a discrete coprocessor. Key differentiating features include the dual-core Cortex-M4 architecture (with floating-point unit, i.e., Cortex-M4F support), 2 MB (2M x 8) of on-chip flash for dual-bank firmware images, hardware cryptographic acceleration (per the Mouser designation CRYPTO), and industrial temperature qualification. These attributes directly target three-phase electricity metering and secure IoT endpoints. Technically, each Cortex-M4 core executes at up to 120 MHz, delivering high single-cycle DSP performance with hardware divide and SIMD instructions. The flash density supports large RTOS-based stacks such as FreeRTOS and dual-image OTA upgrades. The crypto engine offloads AES and related algorithms from software, reducing CPU load and improving side-channel resistance for billing-grade security. Typical applications include smart energy meters, data concentrators in smart-grid infrastructure, secure industrial gateways, and IoT sensor hubs requiring both compute headroom and cryptographic protection. The dual-core design isolates metering firmware from network stacks for improved robustness. Design consideration: confirm the exact SRAM size, peripheral set, and pinout from the official Microchip ATSAM4C32 datasheet before layout, and verify land pattern dimensions against the 14x14 mm LQFP-100 footprint. This page synthesizes distributor pricing (as of 2026-09-20), drop-in same-family alternatives, and practical design guidance not found in the manufacturer datasheet alone.

견적 요청 문의하기
ATSAM4C4CB-AU - Dual Cortex-M4 120MHz MCU 256KB | Microchip
ATSAM4C4CB-AU

ATSAM4C4CB-AU - Dual Cortex-M4 120MHz MCU 256KB | Microchip

The Microchip Technology ATSAM4C4CB-AU is a 32-bit dual-core ARM Cortex-M4 microcontroller operating at up to 120 MHz with 256 KB of embedded Flash and 152 KB of SRAM, housed in a 100-pin LQFP (14x14 mm) surface-mount package with a 1.62V to 3.6V supply range. A microcontroller unit (MCU) is a single-chip computer that integrates a processor core, memory, and peripherals on one die, forming the lowest tier of the embedded processor hierarchy (MCU -> system-on-chip -> embedded processor -> semiconductor). The SAM4C series is a smart-energy system-on-chip family, meaning each die integrates two CPU cores plus metering-oriented peripherals such as cryptographic acceleration. Key features include the dual ARM Cortex-M4 RISC cores each with on-chip cache, hardware cryptography (AES) acceleration, 256 Kbytes of embedded Flash (256K x 8), and 120 MHz maximum core speed. The cryptographic engine offloads security-critical computation from the main core, which is significant for revenue-grade smart meters where firmware must perform authenticated communication without sacrificing metering real-time performance. Technically, the dual-core architecture allows functional partitioning: one core typically runs the metering/application stack while the second handles communication or security tasks, improving determinism and fault isolation. The on-chip cache for each core compensates for Flash wait states at 120 MHz, sustaining high effective throughput from the 256 KB program memory. Typical applications include smart electricity meters, energy monitoring gateways, industrial data concentrators, and secure IoT nodes - use cases that benefit from the integrated crypto engine and dual-core processing headroom. Design consideration: the 1.62V to 3.6V supply window accommodates 3.3V systems, but at 120 MHz designers must verify Flash accelerator settings and power budget against the datasheet electrical characteristics before finalizing the power tree. This page synthesizes distributor pricing, drop-in alternatives, and practical design notes not found in the manufacturer datasheet, with data verified as of 2026-09-20.

견적 요청 문의하기
ATSAM4C8CA-AU - Dual-Core 120MHz 512KB MCU | Microchip
ATSAM4C8CA-AU

ATSAM4C8CA-AU - Dual-Core 120MHz 512KB MCU | Microchip

The Microchip Technology ATSAM4C8CA-AU is a 32-bit dual-core ARM Cortex-M4/M4F microcontroller running at 120 MHz with 512 KB of embedded Flash and 128 KB of SRAM, housed in a 100-pin LQFP (14x14 mm) surface-mount package. A microcontroller unit (MCU) is a single integrated circuit that combines a processor core, memory, and peripherals into one chip, forming the lowest tier of the embedded processing hierarchy: MCU -> embedded processor -> system-on-chip (SoC) -> application processor. The ATSAM4C8CA-AU belongs to Microchip (Atmel) SAM4C family of flash-based ARM microcontrollers designed for secure, connected industrial and consumer systems. Key differentiating features include a true dual-core architecture with a secondary Cortex-M4 core dedicated to security processing, an Advanced Cryptographic Engine (ACE), anti-tamper protection, and a hardware Floating Point Unit (FPU). Peripheral density is high: five USARTs, two UARTs, two TWI (I2C) interfaces, up to seven SPI-capable serial multiplexed lines, PWM timers, and two 3-channel general-purpose 16-bit timers. The dual-core SAM4C architecture offloads security functions such as AES/DES transactions from the main core, sustaining real-time control latency on the primary core while the second core manages cryptographic authentication. A 16-bit external bus interface (EBI/EMI) extends program and data memory off-chip. An 8-channel 10-bit ADC handles analog sensing inputs. Typical applications include secure smart-metering endpoints, industrial control panels, IoT gateways, and POS/secure authentication terminals where tamper resistance and encrypted communication are mandatory. Design consideration: the EBI 16-bit external bus makes the ATSAM4C8CA-AU ideal when 128 KB of internal SRAM is insufficient, but EBI trace routing on a 100-pin LQFP requires length-matched layout for reliable operation at full speed. This page synthesizes distributor pricing, drop-in family alternatives, and practical design notes not found in the manufacturer datasheet.

견적 요청 문의하기
ATSAM4C8CA-AUR - Dual-Core Cortex-M4 120MHz MCU | Microchip
ATSAM4C8CA-AUR

ATSAM4C8CA-AUR - Dual-Core Cortex-M4 120MHz MCU | Microchip

The Microchip Technology ATSAM4C8CA-AUR is a 32-bit dual-core ARM Cortex-M4/M4F microcontroller with 512KB (512K x 8) FLASH program memory, 128KB SRAM, and a 120MHz core clock, housed in a 100-pin LQFP (14x14 mm) surface-mount package with Tape & Reel delivery. A microcontroller (MCU) is a single-chip computer integrating a processor core, memory, and configurable peripherals on one die, sitting at the device level of the semiconductor hierarchy beneath system-on-chip (SoC) and above simple logic ICs. The SAM4C family extends Microchip's SAM4 ARM Cortex-M4 line into security-oriented, dual-processor applications where one core can dedicate itself to cryptographic or supervision tasks. Key features include the dual-core architecture (Cortex-M4F main core with hardware FPU plus a second Cortex-M4 coprocessor), an Advanced Cryptographic Engine (ACE) with anti-tamper protection, 512KB embedded Flash, and 128KB SRAM. The peripheral set includes five USARTs, two UARTs, two TWI (I2C) controllers, up to seven SPI interfaces, a PWM timer, two 3-channel 16-bit general-purpose timers, and DMA controllers, enabling complex multi-channel communication designs. Technically, the device runs from 1.2V/3.3V supply domains, supports an external bus interface (EBI/EMI) with a 16-bit bus to extend program and data memory off-chip, and integrates an LCD controller for direct segment or dot-matrix display drive. The 120MHz Cortex-M4 pipeline with DSP instructions and single-cycle FPU supports signal-processing workloads such as metering and secure communications. Typical applications include smart energy meters, secure industrial control nodes, POS terminals, and LCD-based instrumentation where tamper resistance and dual-core isolation matter. Design consideration: plan Flash partitioning between the two cores early; the ACE and anti-tamper features require careful PCB layout to avoid probing points on sensitive nets. This page synthesizes distributor data, drop-in alternatives, and design notes beyond the manufacturer datasheet for higher information gain.

견적 요청 문의하기
ATSAM4C8CB-AUR - Dual Cortex-M4 120MHz 512KB MCU | Microchip
ATSAM4C8CB-AUR

ATSAM4C8CB-AUR - Dual Cortex-M4 120MHz 512KB MCU | Microchip

The Microchip Technology ATSAM4C8CB-AUR is a 32-bit dual-core ARM Cortex-M4F microcontroller running at 120 MHz with 512 KB of embedded Flash and 152 KB of SRAM, housed in a 100-pin LQFP (14x14 mm) surface-mount package. It belongs to the SAM4C family, a system-on-chip solution engineered specifically for smart energy applications such as electricity meters. A microcontroller unit (MCU) is a single integrated circuit that combines a processor core, memory, and peripherals into one chip, sitting within the broader hierarchy of embedded processors as part of Microchip's ARM-based SAM product line. Dual-core MCUs partition application processing and secure metering/comms tasks onto separate cores, improving determinism and security isolation. Key features include two ARM Cortex-M4 processors with hardware floating-point units (FPU), 512 KB Flash organized as 512K x 8, 152 Kbytes of SRAM, and on-chip cache for each core. The device supports a 1.2V core supply with 3.3V I/O operation and is rated for industrial temperature environments. The Mouser listing highlights integrated crypto functionality, green (RoHS-type) packaging, and industrial temperature grade. Architecturally, the dual Cortex-M4 RISC cores allow integration of application logic and security-sensitive metering functions with core-to-core communication handled on-chip, reducing external component count. Per-peripheral masters and DMA reduce CPU loading in communication-heavy metering designs. Typical applications include smart energy meters (electricity metering), industrial automation nodes, and data-concentrator communication modules where two independent processing domains are required. When designing with this device, budget Flash carefully: the 512 KB density is the mid-point of the SAM4C family, and code-size growth beyond it requires migration to ATSAM4C16 variants, which share the same package footprint. This page synthesizes distributor pricing, drop-in same-footprint family alternatives, and practical design notes not found in the manufacturer datasheet, with data verified as of 2026-09-20.

견적 요청 문의하기
ATSAM4CMP16CB-AU - Dual-Core 120MHz MCU 1MB Flash | Microchip
ATSAM4CMP16CB-AU

ATSAM4CMP16CB-AU - Dual-Core 120MHz MCU 1MB Flash | Microchip

The Microchip Technology ATSAM4CMP16CB-AU is a 32-bit dual-core ARM Cortex-M4/M4F SAM4CM microcontroller IC operating at up to 120 MHz, with 1 MB (1M x 8) embedded Flash memory and 128 KB SRAM, housed in a 100-pin LQFP (14x14 mm) gull-wing surface-mount package rated for industrial temperature ranges. A microcontroller (MCU) is a single-chip computer integrating a processor core, memory, and peripherals on one die, sitting at the heart of the embedded-system hierarchy: semiconductor -> integrated circuit -> microcontroller -> system-on-chip (SoC). The SAM4CM family extends this concept by pairing two high-performance Cortex-M4 RISC processors with floating-point (M4F) support in one device, a rare architecture targeted specifically at smart energy metering. Key differentiating features include the dual-core 120 MHz processing engine, 1024 KB embedded Flash for large application and firmware images, a peripheral set tuned for utility metering (hardware support for metrology front ends and multiple communication channels), and industrial-grade temperature qualification. The 100-LQFP package provides abundant GPIO and peripheral pins while remaining hand- and reflow-solderable. Architecturally, the two Cortex-M4 cores allow functional partitioning - for example, one core runs metrology and real-time sampling while the second manages communication stacks (DLMS/COSEM, PLC, RF) - improving determinism and security separation in smart meters. Flash at 1 MB supports dual-bank field firmware upgrades. Typical applications include smart electricity meters, gas and water meter communication modules, industrial monitoring gateways, and any system needing isolated real-time control plus protocol processing. Design consideration: budget PCB layout care for the 0.5 mm-pitch 100-pin LQFP, and validate core-to-core communication latency in shared-SRAM arbitration during early prototyping. This page synthesizes distributor pricing data, drop-in same-family alternatives, and practical design notes not found in the manufacturer datasheet, with all pricing referenced as of 2026-09-20.

견적 요청 문의하기
ATSAM4CMP16CB-AUR - Dual-Core 120MHz 1MB MCU | Microchip
ATSAM4CMP16CB-AUR

ATSAM4CMP16CB-AUR - Dual-Core 120MHz 1MB MCU | Microchip

The Microchip Technology ATSAM4CMP16CB-AUR is a 32-bit dual-core ARM Cortex-M4/M4F microcontroller operating at 120 MHz with 1 MB (1M x 8) of FLASH program memory and 128 KB of SRAM, housed in a 100-pin LQFP (14x14 mm) surface-mount package supplied in tape and reel. A microcontroller unit (MCU) is a single-chip embedded computer that integrates a processor core, memory, and configurable peripherals onto one die, forming the lowest tier of the compute hierarchy: core -> microcontroller -> embedded system. The SAM4CM family extends Microchip's (formerly Atmel) SAM4 ARM-based MCU portfolio, and this variant targets smart metering. Key features include the dual-core architecture pairing a Cortex-M4F with hardware FPU for application processing and metering computation, 1 MB of on-chip FLASH for application and firmware storage, and an integrated hardware crypto engine (CRYPTO, per Mouser listing). The device provides 52 general-purpose I/O pins and connectivity peripherals including EBI/EMI external bus, I2C, IrDA, SPI, and UART/USART, enabling flexible interfacing to meters, displays, and communication modules. Technical depth: Microchip positions the SAM4CMP16 as a system-on-chip solution for residential and poly-phase metering applications achieving up to class 0.2 metrology accuracy over a dynamic range of 3000:1, with seven metering channels and industrial temperature range support. The dual-core split allows real-time metrology sampling to run deterministically on one core while the other manages protocol stacks, LCD driving, and user interfaces without mutual interference. Typical applications include residential electricity meters, poly-phase industrial meters, and smart-grid nodes that require certified measurement accuracy plus secure data handling. The hardware cryptography block supports secure firmware and data protection demanded by utility deployments. Design consideration: this device combines 1.2V core and 3.3V I/O domains, so power-tree sequencing and decoupling must follow the manufacturer datasheet recommendations; the 100-LQFP 14x14 mm footprint requires careful high-frequency layout around the crystal and analog metrology front-end. This page synthesizes distributor pricing, same-family drop-in alternatives, and application guidance not consolidated in the manufacturer datasheet.

견적 요청 문의하기
ATSAM4CMP16CC-AU - Dual-Core Cortex-M4 120MHz 1MB MCU | Microchip
ATSAM4CMP16CC-AU

ATSAM4CMP16CC-AU - Dual-Core Cortex-M4 120MHz 1MB MCU | Microchip

The Microchip Technology ATSAM4CMP16CC-AU is a 32-bit dual-core ARM Cortex-M4/M4F metering system-on-chip microcontroller running at 120 MHz with 1 MB (1M x 8) of embedded Flash memory, housed in a 100-pin LQFP (14x14 mm) surface-mount package. A metering MCU is a class of microcontroller that integrates the compute cores, crypto acceleration, and analog/peripheral resources needed to measure electrical energy with utility-grade accuracy. The ATSAM4CMP16 belongs to the ARM Cortex-M4 microcontroller hierarchy (MCU -> embedded processor -> semiconductor), positioned by Microchip as a seamless extension of the SAM4 family and the SAM4C family, targeting smart energy infrastructure. Key features include the dual-core Cortex-M4/M4F architecture (one core dedicated to metrology computation, the other to communication and application logic), hardware cryptographic acceleration, and 1 MB of on-chip Flash for program storage. The dual-core split allows the metrology core to sustain class 0.2 energy accuracy without being disturbed by communication stacks. According to Microchip product data, the SAM4CMP16 achieves class 0.2 metrology accuracy over a dynamic range of 3000:1 across the industrial temperature range. The device operates from multiple supply domains (1.2 V, 1.8 V, 2.5 V, and 3.3 V as listed by distributors), and the -AU suffix denotes the green, industrial-temperature 100-pin LQFP (14x14) package in tray packaging. Typical applications include residential smart energy meters, poly-phase industrial metering, energy monitoring gateways, and sub-metering systems where secure, accurate energy measurement and robust communication interfaces must coexist on a single chip. Designers should budget dual-core flash and SRAM partitioning early, since the two Cortex-M4 cores share on-chip memories, and should plan power supply sequencing across the device multiple voltage domains. This page synthesizes distributor pricing, drop-in family alternatives, design notes, and application guidance not found in a single manufacturer datasheet.

견적 요청 문의하기
ATSAM4CMP16CC-AUR - Dual Cortex-M4 120MHz MCU | Microchip
ATSAM4CMP16CC-AUR

ATSAM4CMP16CC-AUR - Dual Cortex-M4 120MHz MCU | Microchip

The Microchip Technology ATSAM4CMP16CC-AUR is a 32-bit dual-core ARM Cortex-M4/M4F metering system-on-chip (SoC) microcontroller running at 120 MHz with 1 MB (1024 KB) embedded Flash, 152 KB SRAM, and integrated cryptographic acceleration, housed in a 100-pin LQFP (14x14 mm) package. A metering SoC is a class of microcontroller that combines a general-purpose MCU core with dedicated metrology computation resources, enabling smart energy meters to measure voltage, current, power, and energy with high accuracy on a single chip. Within the power management hierarchy, it sits above general-purpose MCUs by integrating metrology hardware accelerators, and it extends Atmel's proven SAM4 family and SAM4C family architecture. Key features include dual Cortex-M4/M4F cores operating at up to 120 MHz with hardware floating-point and DSP instructions, 1 MB Flash memory for firmware plus data logging, and support for poly-phase metering up to class 0.2 metrology accuracy over a dynamic range of 3000:1. The integrated crypto engine supports secure firmware and data protection, essential for modern utility infrastructure, and the part is specified for the full industrial temperature range. Architecturally, the SAM4CMP16 is a seamless extension of the SAM4C family: one core is dedicated to metrology computation while the second core handles communication, display, and application tasks. This partitioning eliminates timing conflicts between measurement and protocol stacks such as DLMS/COSEM or M-Bus, improving both measurement integrity and system responsiveness. Typical applications include residential and poly-phase electricity meters, industrial sub-meters, and secure industrial control systems requiring high-accuracy energy measurement with encrypted communication. When designing with this device, partition metrology routines on one core early in the project and validate class 0.2 accuracy across the full 3000:1 dynamic range with your front-end circuitry, since sensor selection directly affects achievable accuracy. This page synthesizes distributor pricing, drop-in family alternatives, and practical design notes not found in the manufacturer datasheet.

견적 요청 문의하기