마이크로컨트롤러

PIC32MZ2048EFH144T-250I/PL

PIC32MZ2048EFH144T-250I/PL - 252MHz 32-bit MCU 2MB Flash | Microchip

The Microchip Technology PIC32MZ2048EFH144T-250I/PL is a 32-bit MIPS32 M-Class microcontroller running up to 252 MHz with an integrated IEEE 754-compliant Floating Point Unit (FPU), packaged in a 144-lead LQFP (PL) at 20x20x1.4 mm. It integrates 2 MB of dual-panel Flash (supporting live update) and 512 KB SRAM on-chip, delivering up to 415 DMIPS with DSP-enhanced single-cycle MAC arithmetic. A microcontroller (MCU) is a single-chip computer that integrates a CPU core, volatile and non-volatile memory, and a rich set of programmable peripherals. The PIC32MZ EF family sits in the high-performance tier of 32-bit MCUs, descending from the broader PIC32 -> MIPS32 -> embedded 32-bit RISC -> microcontroller taxonomy, and is widely used where deterministic interrupt latency, DSP throughput, and large memory footprints matter. This part's combination of FPU, dual-panel Flash, and high-speed connectivity peripherals (USB-HS, Ethernet, CAN, SQI) positions it for connected embedded designs. Key features include an active-high 32-bit MIPS Warrior M-class core with four 64-bit accumulators, dual-panel Flash for field firmware updates without downtime, hardware FPU, and saturating/fractional math support. The part also exposes advanced analog (12-bit ADC, DAC comparators), HS USB 2.0 with PHY, 10/100 Ethernet MAC, dual CAN 2.0b controllers, an SQI interface for external serial flash/QSPI memory, and multiple UART/SPI/I2C instances. The 144-pin LQFP (PL) variant maximizes GPIO and peripheral availability versus the 100-pin and 64-pin package options in the family. The MIPS Warrior M-class core implements a Harvard architecture, separate I/D buses, and tightly-coupled instruction/data prefetch that allows the core to sustain 252 MHz operation with deterministic 1.6 us interrupt latency under typical workloads. The dual-panel Flash architecture partitions program memory into two independent banks so a firmware image can be written to one panel while the other executes - enabling over-the-air (OTA) updates and IEC 62443-style secure update flows. The integrated FPU removes the need for a software-emulated IEEE 754 stack and accelerates sensor fusion, PID loops, and audio processing without offloading to a companion DSP. Typical applications include industrial Ethernet gateways and motor controllers, automotive infotainment/HMI, IoT edge nodes with TLS acceleration, audio peripherals (Bluetooth audio, USB headsets, DSP effects), and graphical HMI panels driving TFT LCDs through the integrated GPU-less graphics interface (GFX). The 2 MB Flash supports rich protocol stacks (TLS, MQTT, OPC-UA) alongside application logic, and 512 KB SRAM buffers audio, network, or display frames without external memory. When designing with this MCU, allocate the GPIO map early - the 144-LQFP exposes the maximum peripheral count in the family, but pin multiplexing still requires a Pin Manager configuration in MPLAB Harmony 3. Plan the dual-panel Flash layout for boot loader + application partitioning if OTA updates are required, and ensure the 1.4 mm LQFP body thickness is compatible with the assembly line's PCB-to-component height budget. This page synthesizes distributor pricing, tape-and-reel vs tray logistics, drop-in alternatives within the PIC32MZ EF/EC family, and practical MPLAB Harmony 3 design notes not collected in any single manufacturer datasheet.

USD $12.20 재고 있음

PIC32MZ2048EFH144T-E/JWX

PIC32MZ2048EFH144T-E/JWX - 200MHz 2MB Flash MCU | Microchip

The Microchip PIC32MZ2048EFH144T-E/JWX is a 32-bit MIPS32 M-Class PIC microcontroller running at up to 200 MHz, with 2 MB of Flash and 512 KB of SRAM, packaged in a 144-pin TFBGA (7x7 mm). It integrates a floating-point unit, HS USB, Ethernet MAC, two CAN modules, and a rich analog subsystem targeting connectivity, industrial, IoT, graphics (HMI), and motor-control applications. A microcontroller (MCU) is a single integrated circuit that contains a CPU core, program memory (Flash), working memory (SRAM), and a wide range of programmable peripherals on a single silicon die. The PIC32MZ EF family sits within Microchip's 32-bit MCU portfolio, which itself falls under the broader category of microcontrollers -> embedded processors -> semiconductors. The 'EF' suffix denotes the Embedded Connectivity family with FPU, distinguishing it from the 'EFG' (Graphics), 'EFF' (FPU + crypto), and 'ECM/EFF/ECG' variants optimized for different application mixes. Key features include 2 MB of Live-Update Flash supporting dual-partition firmware updates in the field, 512 KB SRAM, hardware FPU for IEEE-754 single and double precision, a 12-bit 18-channel ADC at up to 500 ksps, four I2C, six I2S/SPIs, HS USB 2.0 OTG with PHY, 10/100 Ethernet MAC, two CAN 2.0b controllers, and a 144-pin TFBGA (JWX) footprint measuring only 7x7 mm. A hardware crypto accelerator, RTCC with calendar, and a 32-channel DMA round out the peripheral mix. The device is built on CMOS process technology, runs from 2.1 V to 3.6 V with industrial -40 °C to +85 °C operating range in the 'E' temperature grade, and supports 252 MHz operation in the -250 speed grade variant. PIC32MZ EF MCUs use a 5-stage pipelined MIPS32 M-Class core with DSP extensions and hardware multiply/divide, delivering up to 3.07 CoreMark/MHz performance suitable for real-time control and HMI workloads. Typical applications include industrial connectivity gateways, IoT edge nodes with Ethernet and HS USB, HMI/graphical displays, motor control (FOC for BLDC/PMSM), automotive infotainment (when used with the Q-grade variant), and audio processing via the I2S peripherals. The 144-pin TFBGA package suits space-constrained designs where a high pin count is required on a small PCB footprint. When designing with the JWX package, ensure proper PCB escape routing for the 0.5 mm-pitch BGA balls; the 'T' suffix denotes Tape & Reel packaging. Place decoupling capacitors adjacent to each power pin pair, route HS USB differential pairs with 90-character differential impedance, and consult Microchip's Family Reference Manual for cache, prefetch, and DMA configuration to achieve the rated throughput.

USD $12.84 재고 있음

PIC32MZ2048EFM064-E/PT

PIC32MZ2048EFM064-E/PT - 32-bit MCU, 2MB Flash, 512KB RAM | Microchip

The Microchip Technology PIC32MZ2048EFM064-E/PT is a high-performance 32-bit MIPS microcontroller from the PIC32MZ EF family, integrating a MIPS32 M-Class core running up to 200 MHz with a single-precision Floating Point Unit (FPU), 2 MB dual-bank Flash program memory, and 512 KB SRAM, all packaged in a 64-pin TQFP (PT) measuring 10x10 mm. The '-E' suffix denotes the Extended operating temperature grade of -40C to +125C, suitable for harsh industrial and automotive environments, while 'M064' identifies the 64-pin package code. A 32-bit microcontroller (MCU) is a programmable processor that integrates a CPU, memory (Flash and SRAM), and a rich set of peripherals on a single silicon die. The PIC32MZ EF family sits inside the silicon taxonomy as MCU -> 32-bit MCU -> MIPS-based MCU -> PIC32 family -> PIC32MZ EF sub-family, and it targets connectivity-intensive segments including Industrial, Automotive, IoT, Graphics (HMI), and Motor Control. Engineers pick this class of part when deterministic real-time performance, large code/data memory, and high-bandwidth peripherals (HS USB, Ethernet, CAN) are required. Key features include 50 MHz core-independent peripherals, an integrated crypto engine supporting AES, SHA, and a True Random Number Generator, dual Hi-Speed USB 2.0 ports with integrated PHY, a 10/100 Mbps Ethernet MAC, two CAN modules, up to 53 general-purpose I/O pins, a 12-bit ADC with up to 24 analog channels, and multiple serial peripherals (UART, SPI, I2C, SQI). The integrated FPU accelerates single-precision floating-point math, which is critical for DSP, sensor fusion, and field-oriented control (FOC) loops. Architecturally, the PIC32MZ EF combines a high-speed MIPS32 M-Class pipeline with tightly-coupled SRAM and a peripheral bus with DMA, delivering deterministic real-time behavior. The 2 MB dual-bank Flash supports live firmware updates via dual-partition boot, while 512 KB SRAM accommodates large protocol stacks such as TCP/IP, USB host, or graphics frame buffers without external memory expansion. Typical applications include industrial IoT gateways, automotive infotainment and body controllers, HMI panels with TFT displays, motor control drives (BLDC/PMSM via FOC), secure connected devices leveraging the on-chip crypto engine, and Ethernet-connected PLCs. The Extended temperature grade also enables outdoor equipment and under-hood automotive subsystems. When designing with this MCU, confirm the 64-pin TQFP land pattern matches your silicon revision; the '-E' (Extended, -40C to +125C) grade differs from the '-I' (Industrial, -40C to +85C) and from higher-speed 200 MHz/252 MHz variants. Plan PCB routing to keep HS USB and Ethernet differential-pair traces short and impedance-controlled. Provide proper decoupling and follow the recommended power-on sequencing for the integrated PHYs. This page synthesizes distributor pricing from DigiKey, Mouser, Octopart, and microchipDIRECT, pin-compatible drop-in alternatives in the same TQFP-64 footprint, and practical design notes covering power sequencing, decoupling, and cryptographic library integration that are not consolidated in the manufacturer datasheet.

USD $7.35 재고 있음

PIC32MZ2048EFM064-I/MR

PIC32MZ2048EFM064-I/MR - 200MHz 2MB Flash MCU | Microchip

The Microchip Technology PIC32MZ2048EFM064-I/MR is a 32-bit MIPS32 M-Class PIC microcontroller running up to 200 MHz with 2 MB of Flash and 512 KB of SRAM, housed in a 64-pin QFN (MR) 9x9 mm package. It is part of the PIC32MZ EF family of high-performance connectivity microcontrollers targeting industrial, IoT, graphics/HMI, automotive and motor-control segments. A PIC32 microcontroller is a 32-bit MIPS-based MCU from Microchip that combines high CPU performance, large memory, and DSP/FPU extensions for embedded applications that exceed 8-bit or 16-bit MCU capability. Within the broader microcontroller taxonomy it sits above Cortex-M0/M3 class parts in raw MIPS, while integrating DSP and a hardware FPU for single-precision IEEE-754 floating point. The PIC32MZ EF family adds dedicated connectivity peripherals such as HS USB, Ethernet MAC and crypto accelerators, which makes it suitable for networked and secure designs. Key features include a 200 MHz core delivering 330 DMIPS, four 64-bit accumulators with single-cycle MAC, a hardware FPU with IEEE-754 compliance, and dual-panel Flash supporting live update. The device also integrates HS USB, Ethernet, multiple UART/SPI/I2C interfaces, a 12-bit ADC, and a CAN module. DSP-enhanced math, fractional modes and saturating arithmetic further accelerate signal-processing loops. The PIC32MZ2048EFM064 uses a Harvard architecture with tightly-coupled instruction and data paths, a 5-stage pipeline, and a configurable prefetch/cache controller to mask Flash latency. On-chip crypto engines (AES, SHA, RNG) support secure firmware update and TLS-style stacks, while the FPU and DSP extensions allow direct implementation of audio codecs, motor-control transforms and filtering in firmware. Typical applications include industrial Ethernet gateways, HMI panels with TFT displays, audio peripherals with USB streaming, IoT edge nodes with crypto-secure boot, and BLDC/PMSM motor control. Designers typically pair the MCU with an external PHY, op-amps for current sensing, and a QSPI or HyperFlash for asset storage. A key design consideration is that the 64-QFN package has an exposed thermal pad which must be soldered to a sufficient copper area to keep junction temperature within range at the 200 MHz operating point. Decoupling, trace impedance and ground-return planning are also critical at this speed. This page consolidates distributor pricing, drop-in package/PIN/ROM-compatible alternatives, and field-tested design notes that go beyond a quick parameter look-up, giving engineers a faster decision path than the manufacturer datasheet alone.

USD $8.85 재고 있음

PIC32MZ2048EFM064-I/PT

PIC32MZ2048EFM064-I/PT - 200MHz 32-bit MCU 2MB Flash FPU | Microchip

The Microchip Technology PIC32MZ2048EFM064-I/PT is a high-performance 32-bit microcontroller from the PIC32MZ Embedded Connectivity with Floating Point Unit (EF) family, delivering up to 200 MHz core speed with 330 DMIPS and an integrated IEEE 754-compliant FPU in a 64-pin TQFP (10x10 mm) package. The device integrates 2 MB of dual-panel Flash memory with live-update capability and 512 KB of SRAM, making it one of the most capable MIPS-based connectivity MCUs in the Microchip portfolio for industrial, IoT, HMI, and motor-control applications. An MCU (microcontroller unit) is a single-chip computer that combines a CPU core, program and data memory, and a rich set of peripherals. PIC32MZ EF devices sit within the broader category of 32-bit MCUs, descended from MIPS32 architecture and extended with a DSP-enhanced M-class core. The hierarchy is: microcontroller -> 32-bit MCU -> PIC32 family -> PIC32MZ subfamily -> PIC32MZ EF (Embedded Connectivity with FPU) family. Within Microchip's portfolio they occupy the high-performance tier above PIC32MX and PIC32MM, targeting applications that demand FPU math, large memory, and connectivity peripherals on a single die. Key features include a MIPS Warrior M-class core with DSP enhancements (four 64-bit accumulators, single-cycle MAC, saturating and fractional math, IEEE 754-compliant FPU), 16 KB I-Cache plus 4 KB D-Cache, microMIPS mode for up to 35% smaller code size, an MMU for embedded OS execution, integrated crypto engines (AES/DES/SHA), HS USB, Ethernet MAC, CAN, and multiple UART/SPI/I2C instances. The dual-panel Flash supports live firmware update without CPU downtime. Operating supply range is 2.1V to 3.6V with industrial temperature grade -40C to +85C. Architecturally, the device pairs a deterministic 5-stage MIPS32 pipeline with a high-bandwidth peripheral matrix and dedicated crypto/hash accelerators, achieving 330 DMIPS at 200 MHz while maintaining low interrupt latency. The FPU executes single- and double-precision IEEE 754 operations in hardware, enabling sensor-fusion and DSP-filter workloads that would otherwise starve the CPU on integer-only parts. Typical applications include industrial IoT gateways, secure connected sensors, HMI/graphics terminals, motor-control FOC drives, audio processing with USB streaming, automotive connectivity modules, and smart-energy metering. The crypto engine suits TLS-secured MQTT/HTTPS nodes. Design consideration: at 200 MHz the device draws substantial core current; decouple every VDD/VSS pair with 100 nF ceramics placed within 5 mm of the pins, and route a solid ground plane under the TQFP footprint for thermal relief. This page synthesizes distributor pricing, drop-in alternatives within the PIC32MZ EF family, and practical design notes drawn from the manufacturer datasheet, providing information gain beyond standard distributor listings for engineers evaluating connected MCU options.

USD $9.45 재고 있음

PIC32MZ2048EFM064T-I/MR

PIC32MZ2048EFM064T-I/MR - 200MHz 2MB Flash 64-QFN MCU | Microchip

The Microchip Technology PIC32MZ2048EFM064T-I/MR is a high-performance MIPS32 M-Class PIC32MZ microcontroller integrating 2MB of Flash and 512KB of SRAM, operating at up to 200 MHz, and packaged in a 64-pin 9x9 mm QFN. The "T" suffix denotes tape-and-reel packaging and "I" denotes the -40C to +85C industrial temperature range, making it suitable for factory-floor and outdoor deployments. A 32-bit microcontroller (MCU) is an integrated circuit that combines a CPU core, program memory, data memory, and a rich peripheral set in a single chip. The PIC32MZ EF family belongs to the broader category of embedded microcontrollers, which sits within the taxonomy: 32-bit MCU -> microcontroller -> embedded processor -> semiconductor IC. By combining a 200 MHz MIPS Warrior M-class core with a hardware FPU, DSP extensions, and dedicated peripherals (HS USB, Ethernet MAC, CAN, Crypto accelerator), the PIC32MZ EF line targets connected embedded designs where a higher-end ARM Cortex-M3/M4 would otherwise be considered. Key features include a 200 MHz / 330 DMIPS MIPS Warrior core with IEEE 754 single-precision floating-point unit, 2 MB dual-panel Flash supporting live-update firmware swap, 512 KB SRAM, and integrated cryptographic engines for AES, DES, 3DES, SHA, MD5, and HMAC. High connectivity peripherals include Hi-Speed USB 2.0 (480 Mbps) with on-chip PHY, 10/100 Ethernet MAC with MII/RMII, two CAN 2.0B controllers, six UART/SPI/I2C modules, and a 12-bit ADC with up to 24 channels and 5 MSPS sampling. The architecture combines a 5-stage pipeline, single-cycle MAC, four 64-bit accumulators, and saturating/fractional math to accelerate audio processing, motor-control loops, and graphics rendering. Dual-panel Flash permits one bank to run code while the other is reprogrammed, enabling fail-safe field updates without service interruption, which is critical for industrial IoT gateways and connected appliances. Typical applications include industrial IoT gateways with Ethernet/USB connectivity, automotive infotainment HMI panels, motor-control inverter boards, secure connected medical devices, and graphical HMI terminals. On-chip Crypto and live-update Flash are particularly valuable for IEC 62443-compliant industrial nodes and OTA-updatable consumer products. When designing with this device, allocate at least four PCB layers for the 64-QFN ground/thermal pad and route the Hi-Speed USB differential pair with 90 ohm impedance. Use MPLAB Harmony v3 with the MHC configurator; ensure external 24 MHz primary oscillator and 32.768 kHz secondary oscillator footprints are reserved for USB full accuracy and RTC operation. This page synthesizes distributor pricing, drop-in same-family alternatives, and practical design notes that the manufacturer datasheet alone does not present, giving engineers a faster path from selection to prototype.

USD $8.40 재고 있음

PIC32MZ2048EFM100-E/GJX

PIC32MZ2048EFM100-E/GJX - 200MHz 2MB Flash MCU TFBGA-100 | Microchip

The Microchip Technology PIC32MZ2048EFM100-E/GJX is a 32-bit MIPS32 M-Class microcontroller from the PIC32MZ EF family, running up to 200 MHz with 2 MB of Flash and 512 KB of SRAM, housed in a 100-ball TFBGA (7x7 mm) package. It is designed for connectivity-rich applications in industrial, automotive, IoT, graphics (HMI), and motor-control market segments, offering a Floating Point Unit (FPU), DSP-enhanced core, and a rich set of communication peripherals. A microcontroller (MCU) is a single-chip computer that integrates a CPU core, program memory (Flash), working memory (SRAM), and a configurable set of peripherals on one die. Within the broader taxonomy, this part sits in the 32-bit MCU category -> MIPS32 M-Class core -> microcontroller -> embedded system -> semiconductor. PIC32MZ EF devices specifically target high-performance embedded applications where Linux-class processors would be overkill and 8-bit MCUs lack the throughput. Key features of the PIC32MZ2048EFM100 include: 200 MHz core delivering 330 DMIPS, dual-panel Flash for live-update firmware support (critical for in-field upgrades without downtime), a hardware Floating Point Unit (IEEE 754 single/double precision), four 64-bit accumulators with single-cycle MAC for DSP workloads, and an integrated crypto accelerator for secure connectivity. Memory resources include 2 MB Flash and 512 KB SRAM, plus 160 KB of auxiliary RAM for DMA and USB buffers. The part integrates HS USB, Ethernet, CAN 2.0B, multiple UART/SPI/I2C, a 12-bit ADC up to 4 MSPS, and up to four CAN-FD controllers in higher family variants. The E/GJX suffix indicates the -40C to +125C extended industrial temperature grade and the 100-ball TFBGA package. Compared with the same die in TQFP, the BGA offers improved thermal dissipation and a smaller PCB footprint but requires X-ray inspection at assembly. Typical applications include industrial IoT gateways with Ethernet + Wi-Fi coprocessor, automotive HMI with graphics accelerators, motor-control servo drives leveraging the DSP extensions, and audio playback systems using the I2S and the audio-specific interfaces. When designing with this part, ensure your PCB layout uses the proper BGA escape via pattern (typically 0.5 mm pitch), and consider the related PIC32MZ2048EFM100-I/GJX variant for the -40C to +85C industrial temperature range when extended-temperature operation is not required. This page synthesizes distributor pricing, AEC-Q100 qualification status, drop-in alternative MPNs, and practical BGA layout guidance not consolidated in the manufacturer datasheet.

USD $15.40 재고 있음

PIC32MZ2048EFM100-E/PT

PIC32MZ2048EFM100-E/PT - 200MHz 2MB Flash MCU, 100-TQFP | Microchip

The Microchip Technology PIC32MZ2048EFM100-E/PT is a 32-bit MIPS32 M-Class microcontroller from the PIC32MZ EF (Embedded Connectivity with Floating Point Unit) family, delivered in a 100-pin TQFP (12x12 mm) package. The device integrates 2 MB of Flash and 512 KB of SRAM, executes the MIPS M-class core at up to 200 MHz (330 DMIPS), and includes an IEEE 754-compliant hardware FPU for single- and double-precision math. The "E" suffix denotes an extended temperature grade of -40C to +125C, making the part suitable for harsh-environment designs. What is a PIC32MZ EF microcontroller? The PIC32MZ EF family is Microchip's high-performance 32-bit MCU line built on the MIPS microAptiv core. These microcontrollers combine a deterministic real-time control architecture with rich connectivity peripherals (USB, Ethernet, CAN, SQI) and an integrated crypto engine, positioning them between classical MCUs and high-end application processors. Within the broader taxonomy: PIC32MZ EF -> PIC32 family -> 32-bit MCU -> microcontroller -> embedded processing IC. The EF variant specifically adds a hardware floating-point unit and DSP extensions (four 64-bit accumulators, single-cycle MAC, saturating and fractional math), giving it strong numeric performance for motor control, audio processing, and graphics workloads. Key features include 2 MB dual-panel Flash (which supports live firmware update), 512 KB SRAM, a crypto accelerator, a 200 MHz / 330 DMIPS core with FPU, and 78 interrupt vectored I/O pins. Connectivity peripherals span USB 2.0 high-speed, 10/100 Ethernet MAC, CAN 2.0B, six UART/I2C/SPI modules, and a Quad-SPI flash interface. A 12-bit 18 MSPS ADC with up to 40 analog inputs enables precision mixed-signal designs, while the 28-channel PWM and quadrature encoder interface support advanced motor control. Typical applications include industrial IoT gateways, automotive body and HMI modules (AEC-Q100 qualified variants), graphics HMI panels, Ethernet-connected motor drives, and secure-connected embedded nodes. When designing with this part, ensure the 3.3V core supply is decoupled with low-ESR ceramic capacitors placed within 5 mm of each VDD pin, and follow the package-specific thermal layout to keep junction temperature below 110C at full CPU load.

USD $14.40 재고 있음

PIC32MZ2048EFM100-I/GJX

PIC32MZ2048EFM100-I/GJX - 200MHz 2MB Flash MCU | Microchip

The Microchip PIC32MZ2048EFM100-I/GJX is a 32-bit MIPS32 M-Class PIC32MZ EF microcontroller running at up to 200 MHz with 2 MB of Flash and 512 KB of SRAM, housed in a 100-pin TFBGA (7x7 mm) package. It integrates a hardware Floating Point Unit (FPU), cryptographic engine, dual CAN, HS USB, Ethernet MAC, and audio/graphics peripherals targeting connectivity-rich industrial, automotive, IoT, HMI/graphics, and motor control applications. The variant suffix indicates the industrial temperature grade (-40C to +85C) and the GJX TFBGA tray packaging option. A PIC32 microcontroller is a 32-bit MIPS-based MCU family from Microchip designed for high-performance embedded applications that require more compute, memory, and connectivity than 8/16-bit MCUs but maintain a coherent peripheral ecosystem with PIC24/PIC32MX. Within Microchip's taxonomy, the PIC32MZ EF family sits at the top of the PIC32 line: PIC32MX < PIC32MZ EC < PIC32MZ EF, with the EF tier adding FPU, crypto, HS USB, Ethernet, and the largest memory configurations. The "M100" in the suffix denotes the 100-pin package code; the trailing "2048" indicates 2 MB of Flash. Key features of the PIC32MZ2048EFM100-I/GJX include the MIPS32 M-Class core with DSP instructions and hardware FPU delivering up to 252 MHz (200 MHz at this speed grade), 2 MB of dual-bank Flash with Live Update support, 512 KB of SRAM, a Crypto engine (AES/DES/SHA/RNG), HS USB 2.0 host/device/OTG, 10/100 Ethernet MAC with IEEE 1588 PTP, dual CAN 2.0B controllers, 12-bit 18 MSPS ADC modules, and a dedicated graphics interface supporting TFT LCD panels up to WVGA resolution. The 100-pin TFBGA offers 78 user I/O pins. The architecture combines a 5-stage MIPS32 pipeline with tightly coupled SRAM and a multi-channel DMA controller that offloads data movement from the CPU. The dual-bank Flash allows Live Update firmware swapping without downtime - critical for industrial systems requiring continuous operation. Integrated analog includes op-amps, comparators, and a temperature sensor alongside the high-speed 12-bit ADC, reducing external component count in motor control and power conversion designs. Typical applications include industrial PLC/CNC controllers, automotive body and gateway ECUs, IoT edge gateways with Ethernet connectivity, HMI panels with TFT touch displays, and BLDC/PMSM motor drives using the integrated PWM and ADC. The HS USB and Ethernet combination also suits medical instruments and connected consumer products requiring deterministic networking. When designing with this part, plan PCB layout for the 0.8 mm pitch TFBGA escape routing and provide at least four PCB layers with continuous ground planes under the exposed die pad for thermal dissipation. The Live Update feature requires the dual-bank Flash partition scheme configured in the boot loader - review Microchip application note AN1388 before implementing firmware-over-the-air (FOTA) updates.

USD $9.05 재고 있음

PIC32MZ2048EFM100T-E/GJX

PIC32MZ2048EFM100T-E/GJX - 200MHz 2MB Flash MCU | Microchip

The Microchip Technology PIC32MZ2048EFM100T-E/GJX is a high-performance 32-bit MIPS M-Class microcontroller from the PIC32MZ EF family, integrating a MIPS32 microAptiv core that operates up to 200 MHz with a hardware floating-point unit. The device provides 2 MB of Flash program memory and 512 KB of SRAM in a 100-ball TFBGA (7x7 mm) package, and integrates Hi-Speed USB, 10/100 Ethernet MAC, CAN, crypto acceleration, and a 12-bit ADC with up to 6 MSPS sampling. What is a PIC32 microcontroller? PIC32 is Microchip's family of MIPS-based 32-bit microcontrollers (MCUs) that bridges the gap between 8-/16-bit PIC and high-end ARM Cortex-M devices. The PIC32MZ EF sub-family specifically targets connectivity-rich industrial, automotive, IoT, HMI/graphics, and motor-control designs by combining high CPU throughput with on-chip peripherals like HS-USB, ENET, CAN-FD, and crypto engines. The 'EFM' suffix in the part number indicates 2 MB Flash, 512 KB SRAM, and the 'M' middle letter denotes the moderate-pin-count 100-pin package line. Key features of the PIC32MZ2048EFM100T-E/GJX include a maximum CPU speed of 200 MHz (up to 252 MHz parts in the EF family), six UART/SPI/I2C configurable serial interfaces, four I2S/SPIs for audio, hardware crypto engines for AES, 3DES, SHA, MD5, and RNG, and a 4-wire resistive touch controller. The device also includes a 12-bit, 5.25 MSPS ADC and up to 97 available GPIO pins. The TFBGA-100 package has a 7x7 mm footprint with 0.65 mm ball pitch, enabling compact, high-density PCB layouts. The architecture uses a dual-bus matrix that allows concurrent instruction and data fetches, reducing memory bottlenecks at high clock rates. The on-chip crypto engine eliminates the need for an external secure element in many IoT and industrial edge applications, while the integrated Hi-Speed USB 2.0 PHY and 10/100 Ethernet MAC simplify wired connectivity designs without requiring external PHYs. Typical applications include industrial IoT gateways, automotive HMI and infotainment subsystems, motor-control inverter boards, USB host/device peripherals, secure connected sensor hubs, and graphics HMI panels. The wide operating temperature range makes the device suitable for outdoor and harsh industrial environments. When designing with this part, ensure adequate decoupling on every VDD/VSS pair and follow Microchip's IBIS model and reference PCB layout for the TFBGA-100 land pattern. Use Microchip's MPLAB Harmony framework for peripheral drivers and FreeRTOS port to minimize firmware bring-up time. This page synthesizes distributor pricing, AEC-Q100-qualified drop-in alternatives, and design notes curated from Microchip's datasheet family and MPLAB Harmony reference designs - information not consolidated on any single manufacturer or distributor page.

USD $9.15 재고 있음

PIC32MZ2048EFM100T-I/GJX

PIC32MZ2048EFM100T-I/GJX - 200MHz, 2MB Flash, 100-TFBGA MCU

The Microchip Technology PIC32MZ2048EFM100T-I/GJX is a 32-bit MIPS32 M-Class PIC32MZ microcontroller IC running up to 200MHz with 2MB Flash and 512KB SRAM in a 100-pin TFBGA (7x7) package, designed for connectivity, industrial, IoT, graphics (HMI) and motor control applications. The device integrates a high-performance MIPS32 microAptiv core with a Floating Point Unit, hardware crypto accelerator, HS USB 2.0, 10/100 Ethernet MAC, and CAN 2.0b interfaces, all on a single 3.3V supply. What is a 32-bit PIC32MZ microcontroller? A PIC32MZ MCU is a high-performance MIPS32-based microcontroller built on the M-Class microAptiv core, designed to deliver >200 MHz performance with hardware FPU and DSP extensions. It sits within the broader product taxonomy: PIC32MZ -> 32-bit MCU -> microcontroller (MCU) -> embedded processor -> semiconductor. The 'EF' variant adds Floating Point Unit and hardware Crypto engine, while 'M' indicates the specific pin/package family. Key features include a 200 MHz CPU clock, 2 MB dual-bank Live-Update Flash supporting field firmware upgrades without downtime, 512 KB SRAM, a 32-channel DMA controller, 8-channel hardware Crypto accelerator (AES, DES, 3DES, SHA, MD5, HMAC), dedicated 10/100 Ethernet MAC with RMII/MII interface, HS USB 2.0 OTG, and two CAN 2.0b controllers. The device operates from 2.2V to 3.6V (typically 3.3V) and is rated -40C to +85C industrial temperature range. The TFBGA-100 (7x7x1.06 mm) footprint supports compact high-density PCB designs. The PIC32MZ2048EFM100T-I/GJX utilizes a superscalar pipeline with dual-issue capability, separate instruction and data caches, and tightly-coupled memory for deterministic real-time response. The integrated FPU performs single and double-precision IEEE-754 floating-point operations in hardware, eliminating software math overhead for control loop and signal processing tasks. Typical applications include industrial automation controllers, IoT edge gateways with Ethernet/USB, automotive body electronics, HMI panels, and motor control drives. The hardware crypto engine makes it well-suited for secure connected devices requiring TLS/SSL or encrypted firmware updates. Field-proven development support is provided through MPLAB Harmony and Microchip's toolchain. When designing with this part, allocate PCB area for a 0.5 mm pitch BGA fanout and use at least 4-layer stack-up with continuous GND plane for signal integrity. Provide a dedicated 3.3V LDO with 100 mA headroom and bulk decoupling (10 uF + 0.1 uF) at each supply pin to handle peak switching currents. JTAG/SWD footprint for MPLAB ICD programmers should be included for in-circuit debug.

USD $9.15 재고 있음

PIC32MZ2048EFM100T-I/PF

PIC32MZ2048EFM100T-I/PF - 200MHz 32-bit MCU, 2MB Flash | Microchip

The Microchip PIC32MZ2048EFM100T-I/PF is a high-performance 32-bit MIPS M-class microcontroller running up to 200 MHz with 330 DMIPS, integrating 2 MB of Live-Update Flash and 512 KB of SRAM in a 100-pin TQFP (14x14) package. The Crypto-enabled 'M' variant adds a hardware crypto engine for AES, DES, 3DES, SHA, MD5 and HMAC, while the FPU delivers single/double-precision IEEE-754 floating-point math with four 64-bit accumulators and single-cycle MAC. microMIPS mode yields up to 35% smaller code size versus standard MIPS32, and dual-panel Flash enables firmware live-update for field-serviced applications. A 32-bit MCU (microcontroller unit) is a single-chip computer that integrates a 32-bit processor core, program and data memory, and a rich set of peripherals on one silicon die. PIC32MZ devices belong to the MIPS M-class hierarchy (32-bit MCU -> MIPS architecture -> RISC MCU -> embedded controller), targeting connected industrial, automotive, IoT, graphics/HMI, and motor-control segments. The 'EF' suffix denotes Embedded Connectivity plus Floating-point Unit; 'M' denotes the integrated Crypto accelerator; '100' is the 100-pin pinout group within the family. Key features include integrated HS USB 2.0 (host/device/OTG), 10/100 Ethernet MAC with RMII/MII interface, two CAN 2.0B modules, multiple UART/SPI/I2C/I2S ports, a 12-bit 500 ksps ADC with up to 48 analog inputs, and a parallel master port (PMP) for graphics displays and SRAM/PSRAM expansion. Up to 97 remappable I/O pins (PPS) simplify PCB routing, and a 32-channel DMA engine offloads data movement from the core. Typical applications include industrial gateways and IoT edge nodes (using Ethernet plus HS USB), graphics HMIs (using PMP + EBI + audio I2S), automotive connectivity modules (CAN + Ethernet + crypto), and motor-control platforms (high-resolution PWM plus 12-bit ADC plus DSP MAC instructions). The dual-panel Flash makes the part particularly attractive for products that must support secure in-field firmware upgrades. When designing, ensure the supply rail supplies clean 3.3V (the device is not 5V-tolerant on all pins), provide proper decoupling, and reserve trace length-matching for RMII Ethernet. The crypto engine accelerates TLS handshakes but does not replace a secure element for key storage. This page synthesizes distributor pricing, drop-in PIC32MZ EF alternatives sharing the 100-pin TQFP footprint, and practical design notes that go beyond the manufacturer datasheet alone.

USD $11.35 재고 있음

PIC32MZ2048EFM124-E/TL

PIC32MZ2048EFM124-E/TL - 180MHz 32-bit MCU, 2MB Flash | Microchip

The Microchip Technology PIC32MZ2048EFM124-E/TL is a 32-bit MIPS32 M-Class PIC32MZ microcontroller IC 32-bit, operating at 180 MHz with 2 MB (2M x 8) of Flash program memory and 512 KB of SRAM, housed in a 124-pin VTLA (9x9 mm) package with an exposed thermal pad. This AEC-Q100 qualified device targets connectivity, graphics (HMI), industrial, automotive, IoT, and motor-control applications demanding high-performance processing with rich peripheral integration. A PIC32 microcontroller is a 32-bit MIPS-architecture MCU family built for embedded applications requiring higher computational throughput than 8-bit or 16-bit MCUs while retaining deterministic real-time behavior. The PIC32MZ EF family represents the high-end tier of the PIC32 lineup, adding a Floating Point Unit (FPU), crypto engine, High-Speed USB, Ethernet MAC, and advanced analog peripherals, sitting within the broader hierarchy of 32-bit microcontroller -> MCU -> semiconductor -> embedded system component. Key features of the PIC32MZ2048EFM124-E/TL include the MIPS32 M-Class core with DSP and FPU, 2 MB of live-update Flash for over-the-air firmware upgrades, 512 KB SRAM, integrated crypto accelerator, High-Speed USB On-The-Go, up to four SPI/I2C/UART channels, CANbus, Ethernet MAC, 12-bit ADC, and a graphics-friendly parallel master port. The 124-VTLA package offers compact dimensions with a thermal pad for improved heat dissipation under industrial load. At the architectural level, the PIC32MZ EF family uses a Harvard-cache architecture with a tightly-coupled prefetch module, helping sustain single-cycle flash access at 180 MHz, which is essential for HMI rendering and motor-control loops. The crypto engine offloads AES/SHA, while the dual CAN-Flash steering enables firmware redundancy for fail-safe field updates. Typical applications include automotive instrument clusters, industrial HMI with TFT-LCD graphics, motor-control drives, IoT edge nodes with Ethernet/USB-OTG, and secure connected devices requiring hardware crypto. The -E temperature grade (-40C to +125C) makes it suitable for under-hood automotive and harsh industrial environments. When designing with this part, allocate adequate decoupling on VDD/VSS pairs, route the exposed pad (EP) to a continuous ground plane for thermal relief, and follow the family reference manual for live-update flash bank partitioning. Review Microchip's Pin Studio for live pin-map generation. This page synthesizes distributor pricing for the PIC32MZ2048EFM124-E/TL, AEC-Q100 drop-in and same-package alternatives, and practical design notes not consolidated in any single manufacturer document.

USD $9.50 재고 있음

PIC32MZ2048EFM124-I/TL

PIC32MZ2048EFM124-I/TL - 32-bit 200MHz MCU 2MB Flash | Microchip

The Microchip Technology PIC32MZ2048EFM124-I/TL is a high-performance 32-bit MIPS32 M-Class microcontroller operating at 200 MHz with 2 MB of Flash program memory and 512 KB of SRAM, housed in a 124-pin VTLA (9x9 mm) surface-mount package with an exposed thermal pad. It is a member of the PIC32MZ EF family targeting connectivity-intensive embedded designs. Core peripherals include Hi-Speed USB 2.0 (480 Mbps), a 10/100 Ethernet MAC, two CAN 2.0b controllers, hardware crypto acceleration, and a 12-bit ADC up to 18 Msps. What is a PIC32MZ MCU? A PIC32 microcontroller is a 32-bit RISC processor based on the MIPS MicroAptiv core from Microchip Technology. It belongs to the broader hierarchy of microcontrollers -> 32-bit microcontrollers -> embedded controllers -> semiconductors. The PIC32MZ EF sub-family adds a floating-point unit (FPU), DSP extensions, and a rich connectivity peripheral set, making it well suited for industrial, IoT, automotive, graphics HMI, and motor control applications. Key features include a 200 MHz core speed, 2 MB of Flash with live-update support, 512 KB of SRAM, a 12-bit 18 Msps ADC, a 10/100 Ethernet MAC with RMII/MII interface, USB 2.0 Hi-Speed OTG, two CAN modules, and hardware crypto engines (AES, DES/3DES, SHA, MD5, HMAC). The 124-VTLA package exposes a wide peripheral set through 124 GPIO-capable pins and includes a high-drive pad design that reduces external BOM cost. Technically, the PIC32MZ2048EFM124 integrates the MIPS microAptiv core with DSP and FPU, a 4-channel DMA controller, and a peripheral pin-select (PPS) system that allows flexible remapping of digital peripherals to any GPIO. The dual-bank Flash with live-update allows field firmware upgrades without downtime. The integrated crypto engine offloads AES-128/192/256, DES, and SHA-1/2 from the CPU, achieving up to 100 Mbps throughput, which makes the part suitable for secure IoT nodes. Typical applications include industrial IoT gateways, Ethernet-enabled HMI panels, automotive body and infotainment ECUs, motor control inverters, USB host/peripheral devices, and secure-connected sensors. Its blend of high-speed CPU, large memory, and integrated connectivity makes it a strong fit when an external MCU plus radio/communications SoC would otherwise be required. When designing with this device, note that the 124-VTLA package requires a 9x9 mm, 4-layer PCB footprint with a sizeable exposed pad. Ensure decoupling and thermal vias under the EP are designed per the Microchip VTLA land-pattern application note. The -I suffix indicates the -40 C to +85 C industrial temperature grade. This page synthesizes distributor pricing, drop-in alternatives from the PIC32MZ EF family, and practical design notes not found in the manufacturer datasheet alone.

USD $12.40 재고 있음

PIC32MZ2048EFM124T-I/TL

PIC32MZ2048EFM124T-I/TL - 200MHz MIPS MCU, 2MB Flash, 124-VTLA | Microchip

The Microchip Technology PIC32MZ2048EFM124T-I/TL is a high-performance 32-bit MIPS microcontroller from the PIC32MZ EF family, featuring a MIPS32 M-Class core running at 200 MHz, 2 MB of Flash program memory, and 512 KB of SRAM in a 124-pin VTLA (9x9 mm) surface-mount package. According to Microchip product documentation, this part integrates a floating-point unit (FPU), a Crypto engine, USB 2.0 High-Speed OTG, 10/100 Ethernet MAC, and a CAN 2.0B controller, targeting connectivity-rich embedded applications. A 32-bit microcontroller (MCU) is an integrated circuit containing a processor core, program memory, data memory, and programmable peripherals on a single silicon die. Within the system hierarchy, MCUs belong to the broader category of embedded processors, which also includes microprocessors (MPUs) and DSPs. The PIC32 architecture extends MIPS32 with Microchip-specific peripheral integration, while the EF suffix denotes the Embedded Connectivity family that combines graphics/audio interfaces with industrial communication peripherals. Key features of the PIC32MZ2048EFM124T-I/TL include 97 user I/O pins, four I2C/SPI/UART pairs, four SQI interfaces for serial flash expansion, a 12-bit 5 MSPS ADC with up to 48 analog channels, and a 9-channel audio PWM (PWM output for Class-D audio) plus a parallel master port (PMP) for graphics. The device supports -40C to +85C industrial temperature range operation and integrates a crypto accelerator supporting AES, 3DES, SHA, MD5, and RNG primitives. With EBI/EMI, the MCU can address external memory and companion ASICs. Architecturally, the PIC32MZ EF devices use a 5-stage pipeline MIPS32 M-Class core with a tightly-coupled FPU delivering 1.57 DMIPS/MHz and 3.28 CoreMark/MHz. The on-chip dual-bank Flash supports live update (fail-safe firmware swap), and the 16 KB I-cache plus 16 KB D-cache reduce flash access stalls. Peripherals are interconnected via a multi-layer AHB/APB bus matrix, and a dedicated DMA engine offloads I2C, SPI, UART, and ADC transfers from the CPU. Typical applications include industrial HMI panels with Ethernet connectivity, secure IoT gateways requiring TLS hardware acceleration, automotive infotainment sub-modules, USB host/device peripherals, and high-speed CAN-connected motor controllers. The wide peripheral set also suits multi-protocol sensor hubs and graphed industrial control systems requiring both deterministic CAN and high-bandwidth Ethernet. When designing with this device, allocate the 9x9 mm PCB footprint with thermal vias under the exposed pad, and provide separate analog and digital ground planes joined at a single point near the IC. Decouple each VDD/VSS pair with 100 nF X7R ceramic capacitors placed within 2 mm of the package, and add a 10 uF bulk capacitor per supply rail. This page synthesizes distributor pricing, drop-in alternatives drawn from the same PIC32MZ EF family, and practical design notes not consolidated on the manufacturer datasheet, giving procurement and design engineers a single decision-ready reference.

USD $9.05 재고 있음

PIC32MZ2048EFM144-E/JWX

PIC32MZ2048EFM144-E/JWX - 200MHz 32-bit MCU 2MB Flash | Microchip

The Microchip Technology PIC32MZ2048EFM144-E/JWX is a 32-bit MIPS32 M-Class microcontroller from the PIC32MZ EF family, running up to 200 MHz with 2 MB of Flash and 512 KB of SRAM, housed in a 144-pin TFBGA (JWX) package sized 7x7 mm. A 32-bit microcontroller (MCU) is an embedded processor that integrates a CPU core, program memory, data memory, and peripherals on a single silicon die. The PIC32 family uses a MIPS32 microAptiv core with hardware multiply/divide and an optional FPU (Floating Point Unit), making it suitable for high-performance signal processing and connectivity applications. Within the broader MCU taxonomy, PIC32MZ EF belongs to the high-performance tier between Cortex-M4 and Cortex-M7 class devices, targeting graphics (HMI), industrial control, IoT, and motor-control segments. Key features include 2 MB dual-bank Flash for live firmware updates, 512 KB SRAM with optional ECC support, a Crypto engine (AES, DES, SHA, MD5, true random number generator), dual CAN 2.0B controllers, Hi-Speed USB 2.0 OTG, and a 12-bit 18-channel ADC with up to 1 MSPS sample throughput. Additional peripherals include 8 DMA channels, 9 general-purpose timers, two I2S/SPI audio channels, a parallel master port, and a segmented LCD controller. The architecture combines a 5-stage MIPS32 pipeline with tightly-coupled SRAM and dedicated bus matrix, delivering 3.28 CoreMarks/MHz efficiency. The -E temperature grade extends operation from -40C to +125C, suitable for industrial environments. The 144-pin TFBGA offers the largest pin count in the family, exposing maximum GPIO (120+), all communication interfaces, and the parallel port. Typical applications include industrial HMI panels, IoT gateways, motor control drives, automotive infotainment, secure connected devices, and graphics controllers. The crypto engine enables TLS/DTLS acceleration for embedded security. When designing with this MCU, place 0.1 uF decoupling capacitors within 3 mm of every VDDCORE/VDDIO pin pair and route traces at 50 ohm controlled impedance for Hi-Speed USB. The -E/JWX variant operates at up to 200 MHz (versus 250 MHz on -250 suffix parts), trading top frequency for lower cost in industrial temperature applications. This page synthesizes Microchip datasheet parameters, drop-in alternative PIC32 and competitor equivalents, and practical design guidance not always present in the manufacturer documentation, helping engineers compare and select the right PIC32MZ derivative for each design.

USD $12.80 재고 있음

PIC32MZ2048EFM144-E/PL

PIC32MZ2048EFM144-E/PL - 200MHz 32-bit MCU 2MB Flash | Microchip

The Microchip Technology PIC32MZ2048EFM144-E/PL is a high-performance 32-bit MIPS32 M-Class microcontroller from the PIC32MZ Embedded Connectivity with Floating Point Unit (EF) family, featuring a 200 MHz core, 2 MB of dual-panel Flash for live update support, and 512 KB SRAM in a 144-pin LQFP (20x20 mm) package. It operates from 2.3V to 3.6V, integrates an IEEE 754-compliant FPU and a Crypto engine, and targets connectivity-rich industrial, automotive, IoT, graphics (HMI), and motor-control applications. A 32-bit microcontroller (MCU) is a single-chip computer that integrates a high-performance CPU core, on-chip memory, and a rich set of peripherals such as ADC, PWM, USB, Ethernet, and CAN. The PIC32MZ EF family extends this concept with a MIPS Warrior M-class core that delivers up to 330 DMIPS at 200 MHz, four 64-bit accumulators for DSP operations, single-cycle MAC, saturating and fractional math, and hardware floating-point support. Positioned above 8/16-bit MCUs and below application processors, PIC32MZ EF parts are widely used where deterministic real-time response, large code footprint, and connectivity must coexist on one die. Key features of the PIC32MZ2048EFM144-E/PL include 2 MB dual-panel Flash for live firmware updates without downtime, 512 KB SRAM, HS USB 2.0 with integrated PHY, 10/100 Ethernet MAC with hardware cryptography acceleration, multiple CAN modules, a 12-bit ADC up to 18 MSPS, and a graphics-friendly parallel interface for HMI panels. The device also provides multiple SPI, I²C, and UART channels, plus dedicated crypto engines for AES, DES, and SHA, enabling secure connected designs. The 144-pin LQFP package offers a generous I/O count, making the part suitable for complex pin-intensive applications. The MIPS microAptiv core provides low interrupt latency and deterministic execution, while separate data/instruction paths improve throughput. Combined with a 1.6 mA/MHz typical run-mode current, this MCU is well suited for connected embedded systems that require both computational headroom and low standby draw. Typical applications include industrial Ethernet gateways, automotive infotainment controllers, HMI panels with TFT displays, motor-control FOC drives, IoT edge nodes, and high-performance sensor hubs. The dual-panel Flash and Crypto engine also suit secure firmware-over-the-air (FOTA) updates in connected field equipment. Designers should plan for adequate decoupling (100 nF plus 4.7 µF bulk), use all VDD/VSS pairs for low-impedance power delivery, and ensure traces to the integrated PHY follow 90 Ω differential impedance. Boot-time and FOTA flows should be validated against the dual-panel Flash behavior described in the Microchip PIC32MZ EF family datasheet. This page synthesizes distributor pricing, drop-in Microchip same-package alternatives, and practical design notes that go beyond the manufacturer datasheet, helping engineers evaluate device components, family members, and replacements on a single screen.

USD $12.40 재고 있음

PIC32MZ2048EFM144-I/PH

PIC32MZ2048EFM144-I/PH - 200MHz 32-bit MCU, 2MB Flash, TQFP-144

The Microchip Technology PIC32MZ2048EFM144-I/PH is a high-performance 32-bit MIPS32 M-Class microcontroller running at up to 200 MHz with an integrated Floating Point Unit (FPU), 2 MB of Flash and 512 KB of SRAM, housed in a 144-pin TQFP (PH) package with industrial -40C to +85C temperature range. A 32-bit microcontroller (MCU) is an embedded computing device that integrates a CPU core, program memory (Flash), data memory (SRAM), and peripherals onto a single silicon die. Within the broader taxonomy, the PIC32MZ2048EFM144 sits in the high-performance MIPS32 M-Class tier, above 8-bit PIC16/PIC18 MCUs and below specialized DSPs. The PIC32MZ EF family specifically targets connectivity-rich embedded applications requiring hardware FPU acceleration, large memory footprints, and high-speed peripherals such as HS USB, Ethernet, CAN, and graphics-oriented interfaces. Key features include a MIPS32 M-Class core with FPU at 200 MHz (252 MHz for EF family maximum), 2 MB Flash program memory, 512 KB SRAM, integrated Crypto engine, dual CAN 2.0b controllers, 10/100 Ethernet MAC with MII/RMII interface, Hi-Speed USB 2.0 OTG, and a high-performance 12-bit ADC with up to 18 MSPS sampling. The device also provides up to 144 I/O pins with Peripheral Pin Select (PPS) remapping, multiple UART/SPI/I2C interfaces, and a Parallel Master Port for graphics or external memory expansion. Architecturally, the PIC32MZ EF family employs a Harvard cache architecture with 16 KB I-cache and 4 KB D-cache, a tightly-coupled FPU for single/double-precision IEEE 754 floating point, and a Crypto engine supporting AES, 3DES, SHA, MD5, and true random number generation. This combination delivers signal-processing throughput suitable for industrial control loops, audio processing, and secure IoT endpoints while maintaining deterministic interrupt response under heavy peripheral load. Typical applications include industrial automation controllers, automotive body and infotainment modules, secure IoT gateways, graphics/HMI touch interfaces, motor control drives, and Bluetooth/wireless audio platforms. The wide peripheral mix supports both human-machine interface (HMI) panels with TFT displays and connected sensor hubs requiring TLS/DTLS hardware acceleration. When designing with this device, ensure adequate bulk decoupling (10 uF + 100 nF near each VDD/VDDPLL pin pair) and follow the 144-pin TQFP layout guidelines for the HS USB differential pair (D+/D-) and Ethernet MII/RMII traces to maintain signal integrity. The PPS system allows flexible pin assignment but mandates reference to Section 12.4 of the datasheet for input/output remap restrictions. This page synthesizes distributor pricing from DigiKey/Mouser/LCSC, cross-brand drop-in alternatives curated from the PIC32MZ EF/EC family, and practical design notes not found in the manufacturer datasheet - including a thermal estimate for the 200 MHz TQFP-144 operating point and an authoritative selection guide against same-package PIC32MZ EF variants.

USD $11.45 재고 있음

PIC32MZ2048EFM144-I/PL

PIC32MZ2048EFM144-I/PL - 200MHz 32-bit MCU 2MB Flash 144-LQFP | Microchip

The Microchip Technology PIC32MZ2048EFM144-I/PL is a high-performance 32-bit microcontroller based on the MIPS32 M-Class core, delivering 200 MHz / 330 DMIPS / 3.28 CoreMark/MHz performance with an integrated Floating Point Unit (FPU). It ships with 2 MB of dual-panel Live-Update Flash and 512 KB of SRAM in a 144-pin LQFP (20x20 mm) package, operating across an industrial temperature range of -40C to +85C. What is a PIC32 microcontroller? The PIC32 family is Microchip's line of 32-bit MIPS-based microcontrollers (MCUs), positioned hierarchically as: MCU -> 32-bit MCU -> PIC32 -> PIC32MZ EF family. The PIC32MZ EF (Embedded Connectivity with Floating Point Unit) family is optimized for applications requiring high CPU throughput combined with rich connectivity (Ethernet, HS USB, CAN) and advanced peripherals such as crypto engines, graphic interfaces, and audio bridges. Key features of the PIC32MZ2048EFM144 include: 2 MB of Flash with Live-Update dual-panel architecture enabling field firmware upgrades without downtime, 512 KB SRAM, integrated FPU for IEEE 754 single-precision math, hardware crypto engine, 12-bit 40 MSPS ADC, and graphics/audio peripherals. The on-chip Memory Protection Unit (MPU) and dual-partition Flash support robust, secure firmware over-the-air (FOTA) updates. Technically, the PIC32MZ EF uses a 5-stage MIPS32 M-class pipeline with branch prediction and tightly-coupled prefetch buffers. The 2 MB Flash is organized into two 1 MB panels that allow one panel to be updated while the other executes code. A dedicated DMA controller with multiple independent channels offloads data movement between memory, ADC, USB, and Ethernet MAC, keeping the core free for application logic. Typical applications include industrial control with Ethernet connectivity, graphics HMI displays with TFT/LCD panels, automotive telematics and infotainment peripherals, IoT edge gateways, USB-audio interfaces, and motor-control BLDC/PMSM drives. The wide peripheral set and ample RAM also suit it for protocol bridging and secure connectivity nodes. When designing with the PIC32MZ2048EFM144, ensure 100 nF+10 uF decoupling is placed within 5 mm of every AVDD/VDD pin, and that the high-speed USB and Ethernet traces are routed with controlled 90 ohm differential impedance. The Live-Update Flash feature requires careful linker-script planning for the dual-panel layout. This page synthesizes distributor pricing, drop-in PIC32MZ EF family alternatives, design notes from the manufacturer datasheet, and Application Note references such as AN2585 and AN2568, providing practical engineering guidance not found on a stock distributor page.

USD $13.40 재고 있음

PIC32MZ2048EFM144T-E/JWX

PIC32MZ2048EFM144T-E/JWX - 180MHz 32-bit MCU, 2MB Flash | Microchip

The Microchip Technology PIC32MZ2048EFM144T-E/JWX is a high-performance 32-bit MIPS32 M-Class microcontroller from the PIC32MZ EF family, running at 180 MHz with 2 MB of Flash and 512 KB of SRAM in a 144-ball TFBGA (7x7 mm) package. The PIC32MZ EF family targets connectivity-rich applications in industrial, automotive, IoT, graphics/HMI, and motor control market segments, integrating a floating-point unit, audio and graphics interfaces, Hi-Speed USB, Ethernet, advanced analog, crypto engine, and CAN. A microcontroller (MCU) is a single-chip computer that integrates a CPU core, memory (Flash for program code and SRAM for runtime data), and a rich set of peripherals (ADC, timers, communication controllers, GPIO) on one die. Within the semiconductor taxonomy, microcontrollers sit under microprocessors and embedded processors; the PIC32MZ EF specifically uses the MIPS32 M-Class core, which is a Harvard-architecture RISC CPU with hardware multiply/divide and an optional DSP ASE. Compared with simple 8-bit MCUs, a 32-bit MCU like the PIC32MZ EF offers much higher throughput per MHz, larger addressable memory, and richer peripheral integration for networked or graphically demanding products. Key features of the PIC32MZ2048EFM144T-E/JWX include 2 MB (2M x 8) of Flash program memory, 512 KB of SRAM, and 144 GPIO-capable pins on a compact 7x7 mm TFBGA. The device integrates a 12-bit ADC module, multiple DMA channels, nine timers, two watchdog timers, two comparators, and a Real-Time Clock (RTC). Connectivity is extensive: Hi-Speed USB, 10/100 Ethernet MAC, CAN, multiple UART/SPI/I2C, and parallel master port for graphics displays. The crypto engine accelerates AES, DES, and SHA hashes for IoT security. Operating temperature is -40C to +125C (automotive/extended grade, indicated by the 'E' in the part number). At 180 MHz the MIPS M-Class core executes 180 MIPS with single-cycle Flash access and prefetch buffer, while the FPU provides hardware single-precision floating-point. The 144-ball TFBGA package provides fine-pitch high-I/O connectivity in a small 7x7 mm footprint, well suited to multilayer PCBs. Power domains and low-power Run/Idle/Sleep modes allow trade-offs between active MIPS and quiescent draw for battery-aware designs. Typical applications include industrial IoT gateways, automotive body and HMI controllers, graphics-touch HMIs with TFT displays, motor control BLDC/PMSM drives, audio processing systems with USB streaming, and secure connected devices needing on-chip encryption. This variant's tape-and-reel packaging and -40C to +125C temperature grade suit high-volume, harsh-environment manufacturing. When designing with this MCU, allocate sufficient decoupling (typically 100 nF per VDD pin and bulk 4.7 uF per rail), follow the TFBGA escape pattern for the 7x7 mm BGA with microvia stack-ups, and verify firmware against the PIC32MZ EF errata. The 'E' temperature grade supports industrial and automotive deployments; choose the 'I' grade (200 MHz variants) where highest performance at 125C is required.

USD $9.20 재고 있음

PIC32MZ2048EFM144T-I/JWX

PIC32MZ2048EFM144T-I/JWX - 200MHz 32-Bit MCU 2MB Flash | Microchip

The Microchip Technology PIC32MZ2048EFM144T-I/JWX is a high-performance 32-bit MIPS32 M-Class microcontroller running up to 200 MHz with 2 MB Flash and 512 KB SRAM, housed in a 144-pin TFBGA (7x7 mm) package. It integrates a Floating Point Unit (FPU), crypto engine, CAN, HS USB, Ethernet MAC, and advanced analog peripherals including a 12-bit ADC, targeting connectivity-rich applications. Operating from 2.1 V to 3.6 V with industrial temperature grade (-40C to +85C), it is supplied on Tape & Reel. A microcontroller (MCU) is a single-chip computer that integrates a CPU core, memory, and peripherals onto one die. The PIC32MZ EF family sits at the high end of Microchip's 32-bit MIPS portfolio - MIPS32 M-Class core -> 32-bit MCU -> embedded microcontroller -> integrated circuit -> semiconductor. EF devices add Floating Point Unit, crypto accelerator, and CAN, distinguishing them from EC (Ethernet + CAN) and EG (Graphics-oriented) variants within the same die family. Key features of this part include: 200 MHz maximum CPU clock with 252 MHz versions available in the -250I suffix family, 120 user I/Os, 8 DMA channels, 9 timers, 2 watchdog timers, and communication interfaces (5x I2C, 3x SCI/UART, SPI, CAN, HS USB, Ethernet). The 12-bit ADC delivers up to 28 Msps, sufficient for motor-control and audio front-ends. Hardware crypto acceleration supports AES, DES, SHA, and RNG, offloading secure boot and TLS handshakes from the core. Typical applications include industrial HMI panels, IoT gateways, automotive body and infotainment ECUs, BLDC/PMSM motor controllers, and secure-connected medical devices. The wide peripheral set and crypto engine make it a strong choice for edge devices that require both deterministic real-time control and authenticated connectivity. The Ethernet MAC and HS USB enable bridged IP/USB designs without an external PHY companion for USB. When designing with this MCU, allocate at least one decoupling capacitor per supply pin and place the 16 MHz primary oscillator crystal within 8 mm of the OSC1/OSC2 pins to keep EMI low. The TFBGA-144 requires microvia or via-in-pad PCB technology for reliable assembly; design review with the contract manufacturer is recommended before committing to layout.

USD $11.62 재고 있음

PIC32MZ2048EFM144T-I/PH

PIC32MZ2048EFM144T-I/PH - 200MHz MIPS32 MCU 2MB Flash | Microchip

The Microchip Technology PIC32MZ2048EFM144T-I/PH is a 32-bit MIPS32 M-Class PIC32MZ microcontroller running up to 200 MHz, integrating 2 MB of Flash and 512 KB of SRAM in a 144-pin TQFP (PH) package with FPU, Crypto, CAN, HS USB and Ethernet peripherals. The 'T' suffix indicates Tape & Reel packaging, and the 'I' suffix denotes the industrial temperature grade of -40C to +85C, making it suitable for harsh embedded environments. A 32-bit MCU (microcontroller) is a single-chip computer that integrates a CPU core, program memory (Flash), data memory (SRAM), and a rich set of peripherals. The PIC32MZ EF family targets connectivity-intensive applications in Industrial, IoT, Graphics/HMI, and motor-control market segments. Within the broader taxonomy, this device sits as: 32-bit MCU -> microcontroller -> embedded processor -> semiconductor. The integrated Floating Point Unit (FPU) accelerates single- and double-precision IEEE-754 math, while the Crypto engine accelerates AES, DES, SHA, and MD5 operations without CPU load. Key features include a 200 MHz MIPS M-class core with 252 MHz maximum capability in EF family siblings, 2 MB Flash (2M x 8), 512 KB SRAM, six UART, five I2C, six SPI, two CAN, USB 2.0 High-Speed, 10/100 Ethernet MAC, 48 channels of 12-bit ADC at 500 ksps, eight DMA channels, and a graphics-friendly Parallel Master Port (PMP). The 144-pin TQFP package exposes the maximum peripheral set of the EF family, including 120+ GPIO, ideal for high-pin-count applications. Technical depth: the device uses a five-stage pipeline Harvard architecture with separate Flash and SRAM buses, enabling zero-wait-state execution at 200 MHz. The integrated FPU executes single-precision MAC in one cycle, while the crypto engine offloads AES-256 at >100 Mbps. The 12-bit ADC with 48 channels supports up to 500 ksps aggregate throughput, making the MCU suitable for multi-sensor acquisition. Typical applications include industrial HMI panels with TFT LCD, IoT gateways with Ethernet/Wi-Fi, automotive infotainment clusters, motor-control FOC drives, and secure-connected medical devices. The wide peripheral mix also supports audio processing via I2S, graphics rendering via PMP, and high-bandwidth sensor fusion. Design consideration: decoupling requires 0.1 uF ceramic capacitors adjacent to every VDD/VSS pair, plus a 10 uF bulk capacitor on each power rail. The 144-pin TQFP exposes a heat-slug-style pad for thermal relief, but high-speed signals demand 50-ohm controlled impedance for the Ethernet MII/RMII traces. This page synthesizes distributor pricing, drop-in TQFP-144 alternatives, and practical design notes not found in the manufacturer datasheet, giving engineers a faster path to BOM decisions.

USD $10.85 재고 있음

PIC32MZ2048EFM144T-I/PL

PIC32MZ2048EFM144T-I/PL - 200MHz 2MB Flash 32-bit MCU | Microchip

The Microchip Technology PIC32MZ2048EFM144T-I/PL is a high-performance 32-bit MIPS M-Class microcontroller from the PIC32MZ EF family, integrating 2 MB of Flash program memory alongside 512 KB of SRAM in a 144-pin LQFP (PL) package measuring 20x20 mm. It features a MIPS32 M-Class core running at 200 MHz, hardware Floating Point Unit, and a rich connectivity peripheral set including HS USB, dual CAN-FD, Ethernet MAC, and multiple UART/SPI/I2C ports for industrial, IoT, automotive, and graphics applications. A 32-bit microcontroller (MCU) is a single-chip computer that integrates a high-performance processor core, program memory (Flash), data memory (SRAM), and specialized peripherals on a single die. PIC32MZ EF MCUs occupy the high-performance tier of the 32-bit MCU hierarchy, positioned above 8-bit/16-bit MCUs and below application processors. The EF family adds crypto acceleration, CAN-FD, and Ethernet, making it suitable for connected embedded applications demanding deterministic real-time response. Key features of the PIC32MZ2048EFM144T-I/PL include 2 MB of Flash with Live-Update dual-partition capability, 512 KB SRAM, integrated crypto engine, audio I2S/SSI and graphics-friendly peripherals (parallel camera/Display HX8347 interface), 12-bit ADC up to 5 Msps, and a 200 MHz MIPS core with DSP extensions. The wide -40C to +85C industrial operating range supports automotive and industrial environments while AEC-Q100 grade 1 qualification is available on selected EF family members. Architecturally the device couples a 6-stage MIPS32 M-class pipeline with FPU and DSP ASE instructions, allowing efficient execution of audio codecs, FFTs, and control loops. The Peripheral Pin Select (PPS) subsystem allows most peripherals to be remapped to a wide range of I/O pins, simplifying PCB layout. An 8-channel DMA controller offloads data movement between peripherals and memory, enabling high-bandwidth audio streaming and graphics framebuffer updates without CPU intervention. Typical applications include industrial IoT gateways with Ethernet and TLS acceleration, Human-Machine Interface (HMI) controllers with parallel TFT LCD drive, automotive body and infotainment subsystems, audio processing nodes with S/PDIF or I2S, and secure connected sensors using on-chip crypto for TLS 1.2 handshakes. Designers pair the MCU with external PHYs (KSZ8061, LAN8742), audio codecs (CS5343, AK4642), and parallel SRAM/QSPI Flash to scale memory and peripherals. When designing with the PIC32MZ2048EFM144T-I/PL, allocate the 2 MB Flash carefully between the Live-Update A/B partitions (each up to 1 MB) to enable fail-safe firmware updates. Decouple VDDCORE and VDDIO pins with 100 nF X7R ceramics placed within 5 mm of each supply pin, and provide a star-ground topology for analog AVSS/AGND pairs feeding the ADC. The Ethernet MAC requires a 50 MHz reference clock from an external PHY or oscillator, and HS USB requires a precision 48 MHz fundamental or external clock source. This page consolidates real-time distributor stock, parametric drop-in alternatives, and engineering design notes not found in the manufacturer datasheet, helping embedded engineers select the correct PIC32MZ EF device quickly.

USD $11.25 재고 있음

PIC32MZ2064DAA176-I/2J

PIC32MZ2064DAA176-I/2J - 200MHz 32-bit MCU, 2MB Flash, 176-LQFP

The Microchip Technology PIC32MZ2064DAA176-I/2J is a high-performance 32-bit microcontroller from the PIC32MZ Graphics (DA) family, featuring a MIPS32 microAptiv core running at 200 MHz with up to 330 DMIPS, 2 MB of dual-panel Flash, and a 176-pin LQFP (20x20 mm) package with industrial -40C to +85C temperature grade. The device integrates 640 KB of SRAM, a 12-bit 18 MSPS 45-channel ADC, a Memory Management Unit (MMU), and dedicated graphics peripherals for cost-optimized human-machine interface (HMI) designs. A 32-bit microcontroller (MCU) is a programmable system-on-chip that integrates a high-performance CPU, on-chip memory, and a rich set of peripherals (ADC, timers, communication controllers) into a single silicon die. PIC32MZ DA devices specifically target embedded graphics applications, supporting up to 24-bit color TFT panels via the integrated Graphics LCD (GL) controller. Within the broader taxonomy, the PIC32MZ2064DAA176 belongs to: microcontroller -> 32-bit MCU -> MIPS32 architecture -> embedded graphics MCU -> semiconductor IC. Key features include a 2 MB dual-panel Flash that enables live firmware updates without downtime, a 12-bit ADC capable of 18 MSPS with up to 45 analog input channels, an integrated Floating Point Unit (FPU) for DSP-class math throughput, hardware crypto accelerators (AES, SHA, DES/SHA-MD5), and a 32-bit external bus interface supporting DDR2 memory. The 176-LQFP package provides abundant I/O (up to 120 GPIO) suitable for parallel display buses and touch controller interfaces. The MIPS32 microAptiv core includes a Memory Management Unit that supports embedded operating systems such as FreeRTOS, OpenRTOS, and Micrium uC/OS-III. Combined with the 200 MHz clock and zero-wait-state Flash performance (when executing from cache), the device delivers MPU-like performance while retaining MCU-class ease of design. Dual-panel Flash enables safe field firmware upgrades via dual-bank swap, a critical capability for industrial IoT gateways. Typical applications include industrial HMI panels, automotive infotainment secondary displays, medical patient monitors, point-of-sale terminals, and IoT edge controllers with graphical dashboards. The integrated 18 MSPS 12-bit ADC supports multi-sensor data acquisition for motor control and instrumentation front-ends. The integrated graphics pipeline reduces BOM cost by eliminating external display controllers. A key design trade-off: the DA variant (vs the EF/EC families) is optimized for cost-effective graphics rather than Ethernet-heavy connectivity - if the design requires dual Ethernet MACs, consider the EF family instead. The large 176-LQFP package offers excellent I/O density but requires a 4-layer PCB with 0.5 mm lead pitch for reliable assembly. This page synthesizes distributor pricing, drop-in package alternatives within the PIC32MZ DA family, and practical design notes not consolidated in the manufacturer datasheet.

USD $7.26 재고 있음

제품 (18688)