마이크로컨트롤러

제품 (18165)

STM32F103RBH6 - 32-Bit 72MHz 128KB MCU | STMicroelectronics
STM32F103RBH6

STM32F103RBH6 - 32-Bit 72MHz 128KB MCU | STMicroelectronics

The STMicroelectronics STM32F103RBH6 is a 32-bit ARM Cortex-M3 microcontroller operating at 72MHz, with 128KB of Flash memory and a 64-TFBGA package measuring 5mm by 5mm. The device belongs to the STM32F1 series and is positioned for compact embedded systems requiring mixed-signal control, timers, communications, and efficient real-time processing. The verified distributor listing identifies the MCU as a 64-pin TFBGA device, while additional ordering information confirms its 2.5V and 3.3V supply-related positioning. A microcontroller is a programmable semiconductor that integrates a processor core, memory, peripherals, and input/output interfaces onto one package. The STM32F103RBH6 uses an ARM Cortex-M3 core within the broader embedded MCU hierarchy: microcontroller, embedded processor, semiconductor, and electronic component. This family is commonly used where deterministic control, communication connectivity, and broad peripheral integration are needed without a separate external processor. The STM32F103RBH6 provides 128KB of Flash memory, a 72MHz maximum clock indication in the verified listing, and a 32-bit architecture. The STM32F103 family is also identified in the verified material as supporting CAN, LIN, USB, mixed-signal functions, and timer-driven control. These interfaces make it suitable for industrial controllers, communication equipment, motor-control systems, data acquisition modules, and compact consumer products. The device is packaged in a 64-TFBGA, 5mm by 5mm form factor. TFBGA is a surface-mount ball-grid-array package, allowing a compact PCB footprint and short electrical connections when the board layout follows the manufacturer pin and escape-routing requirements. The verified distributor snippet lists 64 pins, while the exact exposed-ball assignments and electrical limits require confirmation from the manufacturer datasheet. A typical design places the MCU beside stable power regulation, decoupling capacitors, oscillator circuitry, reset support, programming access, and application-specific sensors or communication transceivers. Firmware configuration determines whether the available timers, serial interfaces, analog inputs, and communication blocks are used for control, monitoring, or data exchange. Designers should verify package-specific pin multiplexing, power sequencing, clock limits, and peripheral availability against the official datasheet before layout release. The STM32F103RBH6 is best suited to compact embedded-control platforms where 32-bit processing, 128KB Flash, and integrated mixed-signal or communications capability are valuable. Compared with larger LQFP alternatives, its 64-TFBGA package can reduce board area, but it increases assembly and inspection complexity. Compare competitor devices by exact package, pin mapping, memory, peripheral set, clock behavior, and validated firmware support rather than by CPU frequency alone. This page combines verified distributor specifications, package information, pricing references, source links, application guidance, and drop-in alternatives for engineering evaluation. Alternative parts require careful validation of pin compatibility, electrical limits, memory, peripherals, clock behavior, and software support before substitution.

USD $2.86 재고 있음
STM32F103RBH7 - 72MHz 128KB Cortex-M3 MCU | STMicroelectronics
STM32F103RBH7

STM32F103RBH7 - 72MHz 128KB Cortex-M3 MCU | STMicroelectronics

The STMicroelectronics STM32F103RBH7 is a 32-bit ARM Cortex-M3 microcontroller operating up to 72 MHz, with 128 KB of Flash memory and a 64-pin TFBGA package measuring 5 x 5 mm. It belongs to the STM32F1 performance-line MCU family and combines deterministic embedded control with serial communications and general-purpose I/O in a compact surface-mount package. The verified listing identifies ARM Cortex-M3 architecture, 72 MHz operation, 128 KB Flash, and 64-TFBGA construction. A microcontroller is a programmable system-on-chip that integrates a processor core, memory, peripherals, and I/O into one device. The Cortex-M3 hierarchy places STM32F103RBH7 within ARM-based 32-bit embedded processors, microcontrollers, and the broader semiconductor category. It is suited to systems that require compact firmware execution, real-time control, and multiple serial interfaces without using a larger application processor. The verified part data specifies 32-bit processing, a 72 MHz maximum frequency, and 128 KB organized as 128K x 8 Flash. One distributor result also describes a wide I/O selection and available connectivity including USB, CAN, LIN, I2C, and SPI. These interfaces make the device useful when several peripheral buses must coexist. Exact peripheral counts, voltage ranges, RAM capacity, GPIO count, package dimensions, and electrical limits were not supplied in the provided data and therefore remain unconfirmed here. The STM32F103RBH7 is positioned for embedded control, communication gateways, instrumentation, and compact automation modules. Its 128 KB Flash footprint provides room for boot code, application logic, and communication handlers, while the 72 MHz Cortex-M3 core provides computational headroom for control loops. Firmware planning must nevertheless include the device's actual RAM, interrupt map, peripheral variants, clock limits, and pin multiplexing after those values are confirmed from the manufacturer datasheet. PCB design should provide a regulated supply, decoupling capacitors, ground-plane continuity, and clean routing for external interfaces. Because the verified package is a 64-pin TFBGA, assembly and inspection require a land pattern and via arrangement suitable for fine-pitch BGA construction. Do not substitute a package drawing from an LQFP STM32F103 variant, because the STM32F103RBH7 listing explicitly identifies TFBGA rather than LQFP. This data page consolidates exact distributor listings, availability and pricing references, package information, interface context, and replacement-analysis limits for the STM32F103RBH7. Unverified technical values are deliberately identified as missing rather than inferred. Engineers should use the manufacturer datasheet for final pin assignments, timing, electrical characteristics, memory, errata, and qualification decisions before release to production.

USD $2.23 재고 있음
STM32F103RBT6 - 72MHz Cortex-M3 MCU 128KB Flash | ST
STM32F103RBT6

STM32F103RBT6 - 72MHz Cortex-M3 MCU 128KB Flash | ST

The STMicroelectronics STM32F103RBT6 is a 32-bit ARM Cortex-M3 microcontroller operating at 72 MHz, integrating 128 KB of single-bank Flash and 20 KB of SRAM in a 64-pin LQFP surface-mount package. It belongs to the ST medium-density STM32F1 performance line and is one of the most widely deployed Cortex-M3 MCUs in industrial control and communication modules. A microcontroller unit (MCU) is a single integrated circuit that combines a processor core, memory, and programmable peripherals into one device, forming the lowest layer of the embedded-system hierarchy: MCU -> microcontroller -> embedded processor -> system-on-chip. The ARM Cortex-M3 is a 32-bit RISC processor core optimized for cost-sensitive and power-conscious embedded control. The STM32F103 family was one of the first mainstream Cortex-M families adopted at scale across industrial electronics, in large part because of its rich peripheral set and pin compatibility across Flash derivatives. Key features include the 72 MHz Cortex-M3 core delivering 1.25 DMIPS/MHz, 128 KB on-chip Flash, 20 KB SRAM, a 2.0 V to 3.6 V supply range with a 3.3 V operating point, two 12-bit ADCs with up to 1 microsecond conversion time and up to 16 input channels, two I2C, two SPI, three USART, one USB 2.0 full-speed interface, one CAN 2.0B active controller, and seven 16-bit timers including PWM-capable channels. An 8 MHz high-speed internal RC oscillator and support for an external 4 to 16 MHz crystal allow flexible clocking without external components. Architecturally, the device uses an ARMv7-M Harvard structure with a three-stage pipeline and a Nested Vectored Interrupt Controller (NVIC) for low-latency interrupt response. An AHB/APB bus matrix allows peripheral DMA and core execution to proceed concurrently, while a Flash interface with prefetch buffer minimizes stalls when the 72 MHz core fetches instructions from Flash. Typical applications include industrial control nodes, motor-control auxiliary boards, USB and CAN communication modules, low-cost development platforms, and legacy 8-bit/16-bit MCU upgrades where the ARM tool ecosystem reduces software cost. Designers also use this device in smart-metering peripherals and low-cost HMIs. Design consideration: pin compatibility across the STM32F1 family means Flash upgrades from 128 KB to 256 KB (e.g., STM32F103RCT6) require no PCB change, but verify RAM sizing, peripheral count, and the 72 MHz maximum frequency when porting between derivative families. This page synthesizes distributor pricing, verified drop-in alternatives including the GD32F103RBT6 cross-brand P2P candidate and STM32F103RCT6 same-family upgrade, plus practical design notes not found in the manufacturer datasheet.

USD $3.18 재고 있음
STM32F103RBT6TR - 72MHz Cortex-M3, 128KB Flash MCU | STMicroelectronics
STM32F103RBT6TR

STM32F103RBT6TR - 72MHz Cortex-M3, 128KB Flash MCU | STMicroelectronics

The STMicroelectronics STM32F103RBT6TR is a 32-bit ARM Cortex-M3 microcontroller running at 72 MHz (90 DMIPS, 1.25 DMIPS/MHz) with 128 KB Flash and 20 KB SRAM, housed in a 64-pin LQFP surface-mount package (Tape & Reel packaged, indicated by the TR suffix). A microcontroller (MCU) is a single-chip computer that integrates a processor core, program memory, data memory, and peripheral interfaces on one die. Within the embedded-systems hierarchy, the STM32F103RBT6TR belongs to the medium-density performance line of the STM32F1 family: MCU -> 32-bit MCU -> ARM Cortex-M3 MCU -> STM32F1 series -> STM32F103 medium-density performance line. Key features include two 12-bit ADCs with up to 10 external channels and 1 us conversion time, seven 16-bit timers, and nine communication interfaces: two I2C, three USARTs, two SPIs, a full-speed USB 2.0 device controller, and a CAN 2.0B controller. A 7-channel DMA controller offloads data transfers, and a nested vectored interrupt controller (NVIC) with 60 maskable interrupt vectors enables deterministic real-time response. The core supports single-cycle hardware multiply and division for efficient signal processing. Technically, the device operates from a 2.0 V to 3.6 V supply with dedicated VDDA/VSSA analog pins that isolate the ADC and PLL from digital supply noise. Power modes include Sleep, Stop, and Standby with wake-up in microseconds; typical run consumption is low enough for battery-powered designs. Flash supports 10,000 write cycles with embedded erase/write controllers, and true read-while-write operation permits EEPROM emulation. Typical applications include industrial control and PLC I/O modules, motor control and inverter boards using the advanced TIM1 timer, USB and CAN field devices, medical handheld instruments, and consumer appliances. Design consideration: keep VDDA well-decoupled (10 nF plus 1 uF) and provide a clean 3.3 V rail with 100 nF on every VDD pin pair; BOOT0 must be strapped to ground for flash boot. This page adds value beyond the datasheet by synthesizing distributor pricing, verified pin-compatible alternatives such as GigaDevice GD32F103, and practical design notes for second-sourcing and migration.

USD $3.58 재고 있음
STM32F103RBT7 - 72MHz Cortex-M3 128KB MCU | STMicroelectronics
STM32F103RBT7

STM32F103RBT7 - 72MHz Cortex-M3 128KB MCU | STMicroelectronics

The STMicroelectronics STM32F103RBT7 is a 32-bit Arm Cortex-M3 microcontroller operating at 72 MHz, with 128 KB of Flash memory, USB, CAN, seven timers, two ADCs, and nine communication interfaces, packaged in a 64-LQFP 10 x 10 mm package. A microcontroller is a programmable embedded-system component that combines a processor core, memory, peripherals, and communication interfaces on one semiconductor device. The STM32F103 belongs to STMicroelectronics’ medium-density performance line and is used to control motors, industrial equipment, communications, sensors, and consumer products. Its Cortex-M3 architecture provides a 32-bit RISC platform while retaining low system complexity for embedded designs. The verified product information identifies a maximum operating frequency of 72 MHz, 128 KB Flash memory, USB, CAN, seven 16-bit timers, two ADCs, and nine communication interfaces. These peripherals support applications requiring analog measurement, timing, serial communications, motor-control feedback, USB connectivity, or CAN-based distributed control. The 64-LQFP package provides a conventional surface-mount footprint suitable for automated PCB assembly. The STM32F103RBT7 is positioned for designs that need more processing performance and peripheral integration than a basic 8-bit or low-density microcontroller, while remaining within the STM32F103 family ecosystem. Its USB and CAN interfaces make it useful for connected embedded equipment, and its dual ADC capability supports analog sensor acquisition. The exact RAM size, supply-voltage limits, pin assignments, and detailed electrical characteristics are not included in the supplied verified data and must be confirmed in the manufacturer datasheet. Typical implementations include industrial motor controllers, USB-connected data-acquisition devices, CAN network nodes, instrumentation, communications equipment, and compact control platforms. Designers should preserve the package footprint, verify every alternate-function pin, confirm memory-map and peripheral compatibility, and review the official STM32F103RB documentation before transferring firmware between MCU variants. A key sourcing consideration is that an electrically similar MCU may not be a true drop-in replacement. Package dimensions, pin multiplexing, peripheral behavior, clock requirements, memory organization, firmware support, and lifecycle expectations must all be checked. This page distinguishes verified product facts from unresolved specifications and avoids inventing values that were not present in the supplied data.

견적 요청 재고 있음
STM32F103RCT6 - 72MHz Cortex-M3 MCU, 256KB Flash | ST
STM32F103RCT6

STM32F103RCT6 - 72MHz Cortex-M3 MCU, 256KB Flash | ST

The STMicroelectronics STM32F103RCT6 is a high-density performance line ARM Cortex-M3 32-bit microcontroller operating at up to 72MHz with 256KB of Flash memory and 48KB of SRAM, housed in an LQFP64 (10x10 mm) surface-mount package with 51 GPIO pins. A microcontroller (MCU) is a compact integrated circuit that combines a processor core, memory, and programmable peripherals on a single chip, forming the central control element of embedded systems. The STM32F103RCT6 sits within the STM32 family hierarchy: STM32F1 series -> STM32 MCU portfolio -> ARM Cortex-M based microcontrollers -> semiconductor ICs. The Cortex-M3 core, with its nested vectored interrupt controller (NVIC) and memory protection unit (MPU), delivers deterministic real-time performance at 1.25 DMIPS/MHz. Key features include a wide 2.0V to 3.6V supply range, -40C to +85C industrial temperature operation, Sleep/Stop/Standby low-power modes, a real-time clock (RTC), multiple PWM-capable timers, and 5V-tolerant GPIOs. The 256KB high-density Flash accommodates complex firmware such as RTOS-based applications, while rich peripheral integration reduces external BOM cost and board area. Architecturally, the device uses an AMBA AHB/APB bus matrix connecting the 72MHz core to SRAM and peripherals, with single-cycle hardware multiply for efficient control-loop mathematics. Three 12-bit ADCs run at up to 1 MSPS (2 MSPS in interleaved dual mode), and two 12-bit DACs support analog output. Connectivity includes USB 2.0 Full Speed, CAN 2.0B, three USARTs, SPI, and I2C interfaces. Typical applications include industrial motor control, PLCs, medical devices, IoT gateways, USB/CAN communication bridges, and HMI panels. Design tip: decouple every VDD pin with 100nF close to the pin plus a 4.7uF bulk capacitor, filter VDDA through a ferrite bead, and strap BOOT0 correctly for the intended boot mode. This page synthesizes distributor pricing, drop-in alternatives including the GigaDevice GD32F103RCT6, pinout guidance, and practical design notes not found in the manufacturer datasheet.

USD $1.64 재고 있음
STM32F103RDT6 - 384KB Flash Cortex-M3 MCU 64-LQFP | STMicroelectronics
STM32F103RDT6

STM32F103RDT6 - 384KB Flash Cortex-M3 MCU 64-LQFP | STMicroelectronics

The STMicroelectronics STM32F103RDT6 is a 32-bit ARM Cortex-M3 microcontroller in the high-density STM32F1 performance line, operating at up to 72 MHz with 384 KB of embedded Flash and 64 KB of SRAM, housed in a 64-pin LQFP (10x10 mm) package. It integrates USB 2.0 Full-Speed, CAN 2.0B, two I2C, three USART plus two UART, two SPI, and one I2S interface, giving engineers 11 timers, 3 ADCs (12-bit, 1 us), 2 DACs (12-bit), and 51 GPIO pins for mixed-signal motor control and industrial networking designs. Background: An ARM Cortex-M3 microcontroller is a 32-bit RISC core with Thumb-2 instruction set, hardware divide, NVIC interrupt controller, and tightly coupled memory interfaces, designed for deterministic real-time embedded control. Within the broader taxonomy, the Cortex-M3 belongs to the ARM Cortex-M family -> 32-bit RISC microcontrollers -> embedded microcontrollers -> microprocessors -> semiconductors. The STM32F1 series is ST's mainstream Cortex-M3 line spanning low-, medium-, high-, and XL-density sub-families with progressively richer peripheral sets. Key specifications include a 2.0-3.6 V single supply range, 4-16 MHz crystal driver with internal 8 MHz RC and 40 kHz LSI for RTC, 12-bit ADC with up to 16 channels, two 12-bit DACs, an FS USB PHY, and a CAN 2.0B controller. The device also features a 7-channel DMA, an SDIO interface for SD/MMC cards, and a CRC engine for embedded communication stacks. Performance is rated up to 90 DMIPS at 72 MHz, with single-cycle multiply and hardware divide. Architecturally, the STM32F103RDT6 uses a multi-AHB bus matrix connecting the Cortex-M3 core, DMA engines, and on-chip peripherals, allowing simultaneous memory and peripheral access without contention. Standard peripherals include three general-purpose 16-bit timers, one PWM timer for motor control, two watchdog timers (independent and window), and a SysTick timer. Embedded Flash is zero-wait state up to 24 MHz; above that, a prefetch buffer maintains 72 MHz operation without software wait states. Typical applications include three-phase motor drives (BLDC, PMSM, induction), industrial control PLCs, USB-CAN bridges, HVAC controllers, low-cost data loggers, biometric instrumentation, and handheld POS equipment. The combination of CAN, USB, and 12-bit ADC resolution in a 64-LQFP package makes the STM32F103RDT6 especially common in automotive aftermarket and 24 V industrial designs where USB diagnostics and CAN fieldbus must coexist. Design consideration: At 72 MHz and 1.8 V core, idle current is roughly 27 mA; selecting sleep or stop modes with RTC wake-up can drop this to the tens-of-microamp range for battery-backed nodes. The 64-LQFP 10x10 mm footprint with 0.5 mm pitch can be hand-soldered, but a 4-layer PCB with continuous ground pour under the exposed pad is recommended for stable ADC performance. This page synthesizes distributor inventory, drop-in alternatives including pin-compatible GD32F103RDT6, application-specific design notes, and verification cross-references not present on any single distributor or manufacturer page.

USD $8.20 재고 있음
STM32F103RET6 - 72MHz Cortex-M3, 512KB Flash MCU | STMicroelectronics
STM32F103RET6

STM32F103RET6 - 72MHz Cortex-M3, 512KB Flash MCU | STMicroelectronics

The STMicroelectronics STM32F103RET6 is a 32-bit ARM Cortex-M3 microcontroller running at up to 72 MHz, with 512 KB of Flash memory and 64 KB of SRAM, housed in a 64-pin LQFP package. The device operates from a 2.0V to 3.6V supply across an industrial -40C to +85C temperature range, exposing 51 general-purpose I/O pins and integrating three 12-bit ADCs, four general-purpose 16-bit timers plus two advanced PWM timers. What is an ARM Cortex-M3 microcontroller? An MCU (microcontroller unit) integrates a processor core, program memory, data memory, and programmable peripherals on a single die, enabling standalone embedded operation. The Cortex-M3 is a 32-bit RISC core within the ARM Cortex-M family (Cortex-M0, M3, M4, M7), widely adopted for industrial control, medical instruments, and consumer electronics because of its deterministic interrupt latency, nested vectored interrupt controller (NVIC), and rich peripheral ecosystem. Within STMicroelectronics' portfolio, the STM32F1 series sits in the general-purpose performance class between entry-level STM32F0 and mainstream STM32F4 devices. Key features of the STM32F103RET6 include 512 KB of Flash organized in 128-bit wide banks for fast code execution, 64 KB of SRAM, two I2C buses, three SPIs, two I2S, one SDIO, five USARTs, a USB 2.0 full-speed device interface, and a CAN 2.0B controller. The high-density Flash architecture supports both in-system programming (ISP) and in-application programming (IAP), and the JTAG/SWD debug interface enables serviceable designs in the field. Technically, the Cortex-M3 core uses a 3-stage pipeline with single-cycle multiply and hardware divide. The optional memory protection unit (MPU) and 7-channel DMA controller offload data movement from the CPU, while the 16-bit timers can be cascaded into complex PWM and quadrature encoder chains for motor and power conversion. Typical applications include motor drives and three-phase inverters, PLC I/O modules, medical devices such as blood-glucose meters, industrial communication gateways using CAN or USB, and consumer human-machine interface panels. When designing with this device, connect VDDA to a clean filtered analog supply and configure BOOT0 correctly at reset, because boot-mode selection directly affects programming and startup behavior. The HSE crystal range (4-16 MHz) and LSE 32.768 kHz crystal must be laid out following ST AN2586 PCB guidelines to avoid radio-frequency interference. This page synthesizes distributor availability, drop-in second sources such as GD32F103RET6, and practical design notes not found in the manufacturer datasheet, providing engineers a one-stop selection resource.

USD $2.21 재고 있음
STM32F103RET7 - 72MHz Cortex-M3 512KB MCU | STMicroelectronics
STM32F103RET7

STM32F103RET7 - 72MHz Cortex-M3 512KB MCU | STMicroelectronics

The STMicroelectronics STM32F103RET7 is an ARM Cortex-M3 32-bit microcontroller operating at 72 MHz, with 512 KB of Flash memory and a 64-LQFP package measuring 10 mm by 10 mm. It belongs to STMicroelectronics’ STM32F1 high-density performance line and integrates communication peripherals including USB, CAN, 11 timers, 3 ADCs, and 13 communication interfaces. These headline resources make it suitable for embedded control, motor-control, industrial communication, and data-acquisition systems requiring broad peripheral integration in a conventional surface-mount package. A microcontroller is an integrated circuit that executes firmware, reads inputs, controls outputs, and manages communication and timing functions. The STM32F103RET7 combines a 32-bit ARM Cortex-M3 processor with embedded Flash and SRAM resources, forming an MCU within the broader embedded-systems and semiconductor hierarchy. Its high peripheral count reduces the need for external interface chips while supporting multiple communication protocols and mixed-signal measurements. The verified product listing identifies a 72 MHz ARM Cortex-M3 core, 512 KB Flash organized as 512K by 8 bits, 64 pins, and a 10 mm by 10 mm LQFP package. The related manufacturer-description excerpt also identifies USB, CAN, 11 timers, 3 ADCs, and 13 communication interfaces. These features support applications that combine real-time control with serial networking, analog measurement, and programmable timing. Compared with simpler 8-bit or low-pin-count MCUs, the STM32F103RET7 offers substantially more processing capacity, memory, and peripheral connectivity while remaining in a 64-pin LQFP package. The 72 MHz Cortex-M3 architecture is suited to control loops, protocol stacks, and human-machine-interface logic. Its three ADC channels and communication interfaces can consolidate measurement and communications onto one controller, although final design suitability depends on electrical ratings and peripheral details not supplied in the verified data. Typical uses include industrial automation controllers, USB- or CAN-connected embedded equipment, motor-control subsystems, and multi-channel data-acquisition systems. Design teams should verify power-supply requirements, exact I/O ratings, memory organization, peripheral multiplexing, clock-tree settings, and package pin assignments against the official STMicroelectronics datasheet before schematic capture or PCB release. A key implementation consideration is that MCU replacement requires validation at firmware, electrical, timing, and peripheral levels. Pin compatibility alone does not guarantee identical behavior, especially when changing manufacturers or clock rates. This page combines verified distributor identity data, same-package alternative research, application guidance, and selection criteria rather than treating all functional equivalents as automatic drop-ins.

견적 요청 재고 있음
STM32F103RFT6 - 32-Bit 72MHz Cortex-M3 MCU | STMicroelectronics
STM32F103RFT6

STM32F103RFT6 - 32-Bit 72MHz Cortex-M3 MCU | STMicroelectronics

The STMicroelectronics STM32F103RFT6 is a 32-bit ARM Cortex-M3 microcontroller operating at up to 72 MHz, with 768 KB of Flash memory, 96 KB of RAM, 51 I/O pins, and a 64-pin LQFP package measuring 10 mm by 10 mm. It is an XL-density performance-line STM32F1 series MCU designed for embedded systems requiring substantial memory, extensive connectivity, and multiple peripheral functions. An STM32F1 microcontroller is a 32-bit embedded-control component combining a processor core, program Flash, static RAM, GPIO, timers, analog converters, and communication interfaces. STM32F1 devices belong to the microcontroller hierarchy, where they sit between a general-purpose microprocessor and simpler fixed-function embedded controllers. The Cortex-M3 core uses a reduced-instruction architecture optimized for control workloads, interrupt handling, and real-time embedded applications. The supplied specifications identify the STM32F103RFT6 with 768 KB program Flash, 96 KB RAM, 51 I/O pins, a 72 MHz operating frequency, and a 64-LQFP package. The device also belongs to the STM32F103 XL-density family and is associated with USB, CAN, timers, ADCs, and communication interfaces. These features support designs requiring multiple serial peripherals, control-loop timing, data acquisition, and external connectivity rather than a simple GPIO-only control node. The STM32F103RFT6 is suitable for industrial automation, motor control, communications, USB-enabled embedded products, CAN-connected equipment, and general-purpose control boards. Its 51 available I/O pins provide connectivity for sensors, actuators, displays, memory, transceivers, and status indicators. The 768 KB Flash capacity offers room for a larger application, bootloader, protocol stack, or logging subsystem than lower-density STM32F1 variants, while 96 KB RAM supports buffered communications and control data. The 64-LQFP package is mechanically suited to leaded PCB assembly and provides a documented alternative to smaller fine-pitch packages when inspection, rework, or hand assembly matters. Designers should confirm the exact pinout, electrical limits, clock configuration, startup behavior, and peripheral assignments from the manufacturer datasheet before finalizing a board. STM32F103RFT6 is supplied in tray packaging according to the verified distributor data. This product page combines distributor specifications, manufacturer-related sourcing information, and engineering-oriented application guidance. It also records the verified availability of same-footprint alternatives without treating a pin-compatible candidate as automatically equivalent in firmware, timing, or analog behavior. The STM32F103RFT6 is therefore best understood as a high-memory STM32F1 MCU platform selected when its documented resources and package match the system requirements.

견적 요청 재고 있음
STM32F103RGT6 - 72MHz Cortex-M3 MCU 1MB Flash | STMicroelectronics
STM32F103RGT6

STM32F103RGT6 - 72MHz Cortex-M3 MCU 1MB Flash | STMicroelectronics

The STMicroelectronics STM32F103RGT6 is an XL-density performance line 32-bit microcontroller based on the ARM Cortex-M3 core running at up to 72 MHz (1.25 DMIPS/MHz), with 1 MB Flash memory and 96 KB SRAM, housed in a 64-pin LQFP (10x10 mm) package. A microcontroller (MCU) is a single-chip computer that integrates a processor core, memory, and programmable peripherals on one die, sitting within the broader hierarchy of semiconductor devices as an embedded processor within the system-on-chip and power management ecosystem. The STM32F1 series performance line targets cost-sensitive embedded control where the ARM Cortex-M3 architecture provides deterministic, single-cycle multiply and hardware division. Key features include 1 MB of embedded Flash for large application code, 96 KB of SRAM, 17 timers, 3x 12-bit ADCs, and 13 communication interfaces covering USB, CAN, USART, SPI, and I2C. The flexible static memory controller (FSMC) supports 4 chip selects and a parallel LCD interface in 8080/6800 modes. Architecturally, the Cortex-M3 core operates from a 2.0V to 3.6V supply with an embedded PLL generating the 72 MHz system clock. Interrupt latency is handled by the nested vectored interrupt controller, and the bus matrix enables parallel peripheral access for deterministic real-time behavior in motor control and communication workloads. Typical applications include industrial automation and motor control, USB and CAN-based communication modules, consumer appliances, and low-cost development platforms, where the large 1 MB Flash accommodates RTOS and communication stacks without external memory. Design consideration: the ADC performance is sensitive to VDDA quality, so provide separate analog supply filtering; also note Flash zero-wait-state behavior only up to 24 MHz, with wait states required at 72 MHz. This page synthesizes distributor pricing, verified drop-in alternatives such as GD32F103RGT6, and practical design notes not consolidated in the manufacturer datasheet.

USD $4.15 재고 있음
STM32F103RGT7 - 72MHz Cortex-M3 1MB Flash MCU | ST
STM32F103RGT7

STM32F103RGT7 - 72MHz Cortex-M3 1MB Flash MCU | ST

STMicroelectronics STM32F103RGT7 is a 32-bit ARM Cortex-M3 RISC microcontroller operating at 72 MHz, with 1 MB Flash memory and up to 96 KB SRAM, housed in a 64-LQFP 10 x 10 mm package. It belongs to the STM32F1 performance-line family and is positioned for embedded control applications requiring high processing speed, substantial program memory, and extensive peripheral integration. The STM32F103 is a 32-bit microcontroller, or MCU, combining a RISC processor core with embedded Flash, SRAM, clocking, communications, timers, and GPIO resources. In the system hierarchy, an MCU is a semiconductor and embedded-control IC that executes firmware while directly controlling sensors, actuators, communications, and human-machine interfaces. The Cortex-M3 architecture provides a deterministic instruction environment suitable for real-time embedded control. Key verified features include operation up to 72 MHz, 1 MB of Flash memory, up to 96 KB SRAM, three 12-bit ADCs, three timers, and support for three APB buses. The high Flash capacity allows larger firmware images, protocol stacks, bootloader code, and application logic to be consolidated on one device. The 64-LQFP package also exposes a broad peripheral complement while remaining compatible with conventional leaded-board assembly and inspection. The STM32F103RGT7 combines a high-performance ARM Cortex-M3 core with memory and peripheral resources connected through two APB buses. Its XL-density designation is reflected in the 1 MB Flash configuration, making it more suitable than smaller-density devices for gateways, industrial controllers, data acquisition systems, and connected embedded products. The verified distributor description identifies the device as a 32-bit, 72 MHz Cortex-M3 MCU with 1M x 8 Flash. Typical applications include industrial automation, motor control, communications equipment, data acquisition, instrumentation, and embedded gateways. Three ADC channels support analog measurement, while multiple timers support timing, waveform generation, motor-control, and encoder-related functions. The large Flash and SRAM resources also support protocol conversion and supervisory firmware without requiring a separate external memory device. Designers should verify the exact peripheral pin mapping, clock configuration, operating voltage limits, and startup behavior against the manufacturer datasheet before layout release. Decoupling, oscillator stability, programming access, reset circuitry, and thermal performance remain PCB-level priorities. STM32F103RGT7 sourcing is supported by the ST product page, DigiKey, Mouser, LCSC, and ST eStore listings captured in the verified data. This product page consolidates verified distributor specifications, package information, sourcing links, and design guidance into a compact engineering reference. It does not invent electrical limits or pin functions that were absent from the supplied source data.

USD $9.81 재고 있음
STM32F103T8U6 - 72MHz Cortex-M3 64KB Flash MCU | ST
STM32F103T8U6

STM32F103T8U6 - 72MHz Cortex-M3 64KB Flash MCU | ST

The STMicroelectronics STM32F103T8U6 is a 32-bit ARM Cortex-M3 microcontroller running at up to 72 MHz with 64 KB of Flash memory, 20 KB of SRAM, and 26 GPIO, housed in a 36-pin VFQFPN (6x6 mm) package with exposed pad. A microcontroller unit (MCU) integrates a processor core, memory, and peripherals on a single die, sitting at the heart of the embedded-system hierarchy: MCU -> embedded controller -> electronic system. The STM32F1 family belongs to ST's medium-density performance line of ARM-based 32-bit MCUs, widely used where deterministic real-time control and low cost are required. Key features include 1.25 DMIPS/MHz Cortex-M3 performance at 0-wait-state memory access, single-cycle multiplication and hardware division, 64 KB embedded Flash, and rich connectivity: CAN 2.0B, I2C, SPI, UART/USART, USB 2.0 full-speed, and IrDA/LIN support. Peripheral set includes DMA, motor-control PWM timers, PDR/POR/PVD reset functions, watchdogs, and a temperature sensor. Architecturally, the Cortex-M3 core with its nested vectored interrupt controller (NVIC) provides deterministic 12-cycle interrupt latency, essential for motor control and communication stacks. The medium-density memory map supports Flash access at 0 wait states up to 24 MHz with prefetch buffer for higher frequencies. Typical applications are industrial automation nodes, BLDC motor control drives, USB/CAN communication boards, and low-cost development platforms such as the original Maple and Arduino-compatible boards. Design consideration: the VFQFPN-36 exposed pad must be soldered to a ground plane for thermal and signal-integrity performance; hand rework of QFN packages requires hot-air tooling. This page synthesizes distributor availability data, drop-in alternatives such as GD32F103T8U6, and practical design notes not found in the manufacturer datasheet.

USD $2.05 재고 있음
STM32F103T8U7 - 72MHz Cortex-M3 64KB MCU | STMicroelectronics
STM32F103T8U7

STM32F103T8U7 - 72MHz Cortex-M3 64KB MCU | STMicroelectronics

The STMicroelectronics STM32F103T8U7 is a 32-bit Arm Cortex-M3 RISC microcontroller operating at 72 MHz, with 64 KB of Flash memory and a 36-pin VFQFPN package measuring 6 x 6 mm. It belongs to the STM32F1 medium-density performance line and is positioned for embedded control, communications, and mixed-signal applications. A microcontroller is a programmable system-on-chip that integrates a CPU core, memory, peripherals, and communication interfaces on one semiconductor device. The STM32F103T8U7 uses the Arm Cortex-M3 architecture, which supports efficient real-time instruction execution. Its 72 MHz operating frequency provides a substantial performance increase over many lower-frequency 8-bit and 16-bit control solutions while retaining a broad embedded peripheral ecosystem. Verified product information identifies 64 KB of Flash memory, USB, CAN, and LIN support, and a 36-VFQFPN package. The STM32F103 family also provides timer and mixed-signal resources suitable for motor control, sensor acquisition, communications, and general-purpose embedded products. The U7 ordering code and tray packaging identify this specific commercial configuration, but electrical limits, SRAM capacity, peripheral details, and operating-temperature data should be confirmed in the manufacturer datasheet before final design release. The STM32F103T8U7 is appropriate for industrial controllers, communication modules, USB peripherals, motor-control systems, and compact control platforms. Its 64 KB Flash capacity provides room for boot code, application firmware, and configuration data, although memory planning must include bootloader, protocol stack, and application overhead. The 6 x 6 mm VFQFPN land pattern also requires careful exposed-pad layout and thermal management. For PCB implementation, follow the manufacturer footprint and exposed-pad recommendations, provide clean supply decoupling, and keep high-current return paths physically short. Firmware should account for clock configuration, peripheral initialization, reset behavior, and any required migration from another STM32F1 variant. This page summarizes verified distributor and manufacturer information while clearly separating confirmed values from parameters requiring datasheet confirmation.

USD $8.73 재고 있음
STM32F103TBU7 - 72MHz Cortex-M3 128KB MCU | STMicroelectronics
STM32F103TBU7

STM32F103TBU7 - 72MHz Cortex-M3 128KB MCU | STMicroelectronics

The STMicroelectronics STM32F103TBU7 is an ARM Cortex-M3 32-bit microcontroller with a 72 MHz maximum operating frequency, 128 KB of Flash memory, and a 36-VFQFPN package measuring 6 x 6 mm. It belongs to the STM32F1 medium-density performance line and integrates USB, CAN, timers, ADCs, and communication peripherals for embedded control, communications, and vehicle-gateway applications. A microcontroller is a semiconductor device that combines a processor core, memory, and peripherals into one embedded-computing component. In the system hierarchy, this device is an MCU, an embedded processor, and ultimately an integrated circuit. The STM32F103TBU7 uses an ARM Cortex-M3 core capable of 1.25 DMIPS per MHz at zero-wait-state memory access, providing a practical balance of processing performance, memory capacity, and peripheral integration. Key features include a 32-bit ARM Cortex-M3 processor, 72 MHz maximum frequency, 128 KB Flash memory, hardware USB and CAN support, seven timers, two ADCs, and nine communication interfaces. Its 128 KB Flash supports stored firmware and application code, while the communication peripherals enable connected embedded systems without requiring separate interface controllers. The 36-VFQFPN package also exposes an exposed pad according to the provided product result, supporting compact surface-mount designs. The STM32F103 family is positioned for medium-density embedded applications where USB, CAN, timing, analog conversion, and serial communications are useful. The MCU is suitable for industrial modules, vehicle gateway nodes, CAN or LIN control networks, motor-control equipment, instrumentation, and communication boards. Its 72 MHz operating limit should be considered alongside clock configuration, peripheral timing, memory wait states, and thermal requirements. For PCB design, use the manufacturer datasheet and package drawing for the exact exposed-pad connection, pin numbering, and recommended land pattern. The verified web results identify the package as 36-VFQFPN (6 x 6 mm), but the complete public pin assignment and electrical limits must be confirmed from the manufacturer datasheet before layout or firmware release. This page consolidates the verified distributor and manufacturer-linked product information, practical application guidance, and a conservative drop-in replacement assessment. The provided search data confirms the core identity and package, while missing detailed electrical, pin-level, price, and lifecycle parameters are marked for data completion rather than guessed.

견적 요청 재고 있음
STM32F103V8H6 - 72MHz 64KB Cortex-M3 MCU | STMicroelectronics
STM32F103V8H6

STM32F103V8H6 - 72MHz 64KB Cortex-M3 MCU | STMicroelectronics

The STMicroelectronics STM32F103V8H6 is a 32-bit Arm Cortex-M3 microcontroller operating at 72 MHz, with 64 KB of embedded Flash memory and a 100-LFBGA package. It is designed for embedded control applications requiring a high-performance processor core, integrated serial communications, analog conversion, timers, and a broad set of general-purpose I/O. The supplied distributor data identifies the part as a 64 KB Flash STM32F1-series MCU, while the manufacturer describes the STM32F103V8 family as a medium-density performance-line device with high-speed embedded memory and enhanced peripherals connected to two APB buses. A microcontroller, or MCU, is a semiconductor device that integrates a CPU core, memory, peripherals, and I/O into one package. The STM32F103V8H6 belongs to the STM32F103 medium-density performance line and uses the Arm Cortex-M3 32-bit RISC architecture. This hierarchy places it within embedded processors, then microcontrollers, and finally general-purpose semiconductor components. Its integrated design reduces the number of external components required for control, measurement, communication, and timing functions. Key verified attributes include an Arm Cortex-M3 core, a maximum clock frequency of 72 MHz, 64 KB Flash memory, two 12-bit ADCs, three general-purpose 16-bit timers according to the manufacturer family description, and a broad selection of communication interfaces. The family description also identifies high-speed embedded memories and enhanced I/O, making the device suitable for compact control systems that need deterministic peripheral performance. The verified distributor listing identifies the package as 100-LFBGA; a separate comparison listing describes the package as 100LFBGA. The STM32F103V8H6 is suitable for industrial control modules, motor-control systems, communication equipment, instrumentation, and connected embedded products. Its 72 MHz processing rate supports responsive control loops and protocol handling, while the ADC resources are useful for sensor acquisition and process monitoring. The two APB-bus architecture provides an organized connection between the processor core and peripherals, helping designers separate bus activity and simplify firmware configuration. For new PCB designs, the exact LFBGA footprint, pin assignment, power architecture, and exposed-pad requirements must be confirmed against the official STMicroelectronics documentation before layout. Firmware should also be validated against the selected peripheral configuration, clock plan, and toolchain. This page uses only values explicitly present in the supplied verified web data; unprovided specifications are marked as data-needed rather than inferred. This product page combines the verified manufacturer description, distributor identification, package data, datasheet links, pricing references, and engineering-oriented design guidance for engineers evaluating STM32F103V8H6.

견적 요청 재고 있음
STM32F103V8T6 - ARM Cortex-M3 72MHz MCU 64KB Flash | ST
STM32F103V8T6

STM32F103V8T6 - ARM Cortex-M3 72MHz MCU 64KB Flash | ST

The STMicroelectronics STM32F103V8T6 is a 32-bit ARM Cortex-M3 microcontroller running at 72 MHz with 64 KB Flash and 20 KB SRAM, housed in a 100-pin LQFP (14 x 14 mm) package. A microcontroller (MCU) integrates a processor core, memory, and peripherals onto a single chip, forming the lowest layer of the embedded computing hierarchy below microprocessors and application processors. The STM32F1 Performance line belongs to ST's STM32 family of general-purpose MCUs, based on the ARM Cortex-M3 32-bit RISC core. Key features of the STM32F103V8T6 include the 72 MHz Cortex-M3 core, 64 KB on-chip Flash and 20 KB SRAM, two 12-bit ADCs, a USB 2.0 full-speed interface, a CAN 2.0B controller, and seven 16-bit timers per ST's official product description. The Cortex-M3 Harvard architecture delivers deterministic interrupt handling through the Nested Vectored Interrupt Controller, while the embedded Flash with prefetch buffer sustains full-speed core operation. The peripheral set spans multiple USART, SPI, and I2C interfaces, enabling rich connectivity within a single supply domain. Typical applications include industrial control boards, motor-control nodes, communication modules, and low-cost embedded platforms - markets where the STM32F103 line has been a default choice for over fifteen years. Designers should verify Flash wait-state configuration at 72 MHz (two wait states) and confirm second-source compatibility for clock and HAL settings when using drop-in substitutes. This page synthesizes distributor pricing, validated drop-in alternatives, and cross-reference guidance not found in the manufacturer datasheet, with pricing verified as of 2026-09-06.

USD $4.40 재고 있음
STM32F103VBH6 - 32-Bit 72MHz Cortex-M3 MCU | STMicroelectronics
STM32F103VBH6

STM32F103VBH6 - 32-Bit 72MHz Cortex-M3 MCU | STMicroelectronics

The STMicroelectronics STM32F103VBH6 is a 32-bit ARM Cortex-M3 microcontroller with a maximum clock frequency of 72 MHz, 128 KB of Flash memory, and 37 I/O ports, supplied in a 7 x 7 mm, 0.5 mm-pitch VFQFPN-48 package. It is a performance-line embedded MCU combining USB, CAN, seven 16-bit timers, two 12-bit ADCs, and multiple communication interfaces for compact control systems. A microcontroller is an integrated circuit that executes firmware, reads inputs, controls outputs, and manages embedded-system resources. The STM32F103VBH6 belongs to the MCU hierarchy: ARM Cortex-M3 microcontroller, 32-bit embedded processor, and programmable control device. Its combination of 72 MHz processing, 128 KB Flash, and USB and CAN support makes it suitable for industrial controls, communication equipment, data acquisition, and motor-control prototypes where several peripherals are required on one device. The verified device description identifies the part as a performance-line, ARM-based 32-bit MCU with Flash, USB, CAN, seven 16-bit timers, and two 12-bit, 1 microsecond ADC channels. The reported operating supply range is 2 V to 3.6 V, while one verified source also identifies RoHS compliance and an active lifecycle status. These features support low-voltage embedded designs that need high processing speed and integrated serial communications without requiring a separate external interface controller. The Cortex-M3 core and 72 MHz operating point provide a practical balance of control-loop performance, memory, and peripheral integration. USB and CAN support can reduce external component count in USB-connected control products and CAN-based industrial equipment. The two ADC channels and seven timers support sensor monitoring, timing, motor-control, and signal-generation functions, provided the selected peripheral pins and board-level analog circuitry are designed according to the manufacturer documentation. Typical applications include USB-to-digital monitoring systems, CAN-connected industrial controllers, embedded instrumentation, automation boards, and compact motor-control or timing platforms. The 48-pin package provides access to the MCU's available I/O, power, ground, analog, and communication functions, but pin assignments and exposed-pad requirements must be checked against the official STM32F103VBH6 datasheet before PCB release. A key design consideration is validating power, clock, decoupling, boot configuration, and signal routing on the selected board. Because the supplied verified data does not include complete electrical limits, pin names, or timing details, designers should not infer missing values; consult the manufacturer datasheet and package drawing for authoritative implementation requirements. This page combines verified distributor and source information with practical application context, procurement data, and replacement-source guidance. It is intended to help engineers identify the correct STM32 MCU, compare compatible sourcing options, and move quickly to datasheet-driven design validation.

USD $6.36 재고 있음
STM32F103VBH7 - 72MHz Cortex-M3 MCU 128KB LFBGA-100 | STMicroelectronics
STM32F103VBH7

STM32F103VBH7 - 72MHz Cortex-M3 MCU 128KB LFBGA-100 | STMicroelectronics

The STMicroelectronics STM32F103VBH7 is a 32-bit ARM Cortex-M3 microcontroller operating at 72 MHz with 128 KB of embedded Flash memory, packaged in a 100-ball LFBGA (10x10 mm). It integrates 1.25 DMIPS/MHz performance (90 DMIPS total), a single-cycle hardware multiplier and divider, and a rich peripheral set: two 12-bit ADCs (1 us conversion), seven 16-bit timers, USB Full-Speed, CAN 2.0B, two I2C, three SPI, two I2S, three USART, two UART, one SDIO, and an FSMC interface for external memory. The supply voltage is 2.0 V to 3.6 V and the device provides 80 general-purpose I/O pins with interrupt capability. An ARM Cortex-M3 microcontroller (often shortened to MCU or simply "Cortex-M3") is a 32-bit RISC processor designed by Arm that targets deterministic, real-time embedded applications. Within the broader taxonomy, it sits under MCU (microcontroller) -> embedded processor -> semiconductor IC. The Cortex-M3 family is widely used in industrial control, motor drives, consumer electronics, and USB peripherals because it combines deterministic interrupt latency (typically 12 cycles) with low power consumption and a Thumb-2 instruction set that keeps code density comparable to 8-bit MCUs. STMicroelectronics' STM32F103 sub-family further extends this with the high-speed peripherals listed above. Key features of the STM32F103VBH7 include support for Sleep, Stop, and Standby low-power modes, an internal 8 MHz RC oscillator with PLL multipliers up to 9x (yielding 72 MHz), an embedded real-time clock (RTC) with calendar and alarm functions, and a 96-bit unique device ID. The two 12-bit ADCs each offer up to 16 input channels (12 on the LFBGA-100 package variant) and can be triggered by timers for precise sampling in motor-control loops. The USB Full-Speed device interface requires an external 1.5 k pull-up and integrates a dedicated 48 MHz PLL. Architecturally, the STM32F103VBH7 uses a multi-AHB bus matrix that allows the DMA controller, CPU, and peripherals to operate in parallel without contention. The NVIC (Nested Vectored Interrupt Controller) accepts up to 43 maskable interrupt sources with 16 priority levels, enabling deterministic response time for time-critical applications such as USB isochronous transfers and motor PWM. A 7-channel DMA controller supports peripherals including the ADCs, SPIs, I2Cs, USARTs, and timers, offloading memory copies from the CPU and improving throughput. Typical applications include industrial motor control (BLDC, PMSM, and stepper drivers), USB HID peripherals (mice, keyboards, custom input devices), CAN-bus nodes for vehicle and industrial networks, point-of-sale terminals, and HVAC controllers. The 72 MHz speed and USB+CAN combination make it a frequent choice for gateways and protocol converters bridging CAN and USB or CAN and Ethernet-via-SPI. When designing with the LFBGA-100 package, ensure 4-layer PCB stack-up with controlled-impedance routing for USB DP/DM, since the 90-ohm differential pair must meet USB 2.0 Full-Speed signalling. Decouple each VDD/VSS pair with a 100 nF X7R ceramic placed within 3 mm of the ball, and add a 4.7 uF bulk capacitor near the regulator input. Configure unused I/O as analog inputs (high-impedance) to minimize quiescent current in Stop mode. This page aggregates distributor pricing, same-package drop-in alternatives, and practical design notes not found in the manufacturer datasheet alone.

USD $5.42 재고 있음
STM32F103VBT6 - 72MHz Cortex-M3 MCU 128KB Flash LQFP-100 | ST
STM32F103VBT6

STM32F103VBT6 - 72MHz Cortex-M3 MCU 128KB Flash LQFP-100 | ST

The STMicroelectronics STM32F103VBT6 is a 32-bit medium-density performance line ARM Cortex-M3 microcontroller running at 72 MHz with 128 KB Flash and 20 KB SRAM, housed in a 100-pin LQFP (14x14 mm) package. A microcontroller (MCU) is a single-chip computer that integrates a processor core, memory, and peripherals on one die, forming the lowest level of the embedded systems hierarchy: MCU -> microcontroller -> embedded processor -> semiconductor device. The STM32F1 series is built on the ARM Cortex-M3 architecture, which delivers 90 DMIPS at 1.25 DMIPS/MHz with single-cycle multiply and hardware division, making it one of the most widely adopted 32-bit MCU platforms in industrial and consumer electronics. Key features of the STM32F103VBT6 include seven timers (three general-purpose 16-bit timers plus one advanced PWM motor-control timer), two 12-bit ADCs with up to 16 external channels, and nine communication interfaces: five USART/UARTs, two I2C, two SPI, plus USB 2.0 full-speed device and CAN 2.0B. The 43-maskable interrupt nested vectored interrupt controller enables deterministic real-time response. Technically, the device operates from a 2.0 V to 3.6 V supply with a robust power architecture including POR/PDR, programmable voltage detector, and low-power run, sleep, stop, and standby modes. The Flash accelerator allows the CPU to achieve near zero-wait-state execution at 72 MHz. DMA controller support offloads data transfers between peripherals and memory. Typical applications include industrial motor control, PLC I/O modules, communication gateways using USB or CAN, medical handheld instruments, and consumer appliances. The combination of a PWM motor-control timer and dual ADC makes it a classic choice for three-phase inverter control. For design, note that GPIO output drive and 5 V tolerance rules differ per pin group; consult the datasheet pin definition table before connecting 5 V logic. Decouple VDD/VDDA pins with 100 nF ceramics placed close to each supply pair. This page synthesizes distributor pricing, drop-in alternatives including GD32F103 and APM32F103 cross-references, and practical design notes not found in the manufacturer datasheet.

USD $3.33 재고 있음
STM32F103VBT7 - 72MHz Cortex-M3 128KB MCU | STMicroelectronics
STM32F103VBT7

STM32F103VBT7 - 72MHz Cortex-M3 128KB MCU | STMicroelectronics

The STMicroelectronics STM32F103VBT7 is a 32-bit ARM Cortex-M3 microcontroller with a maximum 72 MHz operating frequency, 128 KB of Flash memory, and a 100-pin LQFP package measuring 14 mm by 14 mm. It belongs to the STM32F1 performance-line family and combines an embedded processor, memory, timers, analog conversion, and communication peripherals in one device. According to the verified manufacturer-linked data, the part includes USB, CAN, seven timers, two ADCs, and nine communication interfaces. A microcontroller is a programmable integrated circuit used as the central control element of an embedded system. This STM32 MCU follows the ARM Cortex-M3 real-time processor architecture and provides general-purpose I/O, serial communication, analog measurement, timing, and control functions. Its 32-bit architecture supports control workloads requiring more arithmetic capability than an 8- or 16-bit microcontroller, while its integrated peripherals reduce the need for separate interface chips. The STM32F103VBT7 combines a maximum CPU frequency of 72 MHz with 128 KB of programmable Flash. Other verified headline features include USB and CAN connectivity, two analog-to-digital converters, seven 16-bit timers, and nine communication interfaces. These resources make the device suitable for connected industrial controllers, USB peripherals, CAN nodes, data acquisition units, and compact embedded control systems. The Cortex-M3 core is designed for efficient embedded instruction execution and supports single-cycle multiplication and hardware division according to the retrieved technical summary. A maximum frequency of 1.25 DMIPS/MHz is stated at zero-wait-state memory access in the same summary. Designers must still select suitable clock, reset, boot, and memory-support circuitry according to the complete manufacturer documentation before finalizing an embedded design. Typical uses include USB-connected data loggers, CAN-based industrial modules, motor and motion controllers, sensor acquisition equipment, instrumentation, and CAN-to-UPS network bridges. The combination of USB, CAN, multiple timers, and dual ADC resources allows several communications and control functions to share one controller. Engineers should prioritize peripheral-pin availability and package routing over processor headline performance when assigning board functions. A critical design consideration is validating all pin multiplexing, alternate-function assignments, and peripheral dependencies against the manufacturer datasheet. The LQFP package exposes many signals, but simultaneous peripheral use may constrain I/O assignment. Board design should also provide stable power, decoupling, clock routing, a compatible programming interface, and a boot configuration appropriate for the intended firmware. This page combines verified distributor specifications, source links, application engineering guidance, and candidate compatibility information. It also distinguishes confirmed source data from parameters requiring additional verification, helping engineers move from part identification to design review without treating unverified details as guaranteed specifications.

USD $6.08 재고 있음
STM32F103VCT6 - 256KB Flash Cortex-M3 MCU 72MHz | ST
STM32F103VCT6

STM32F103VCT6 - 256KB Flash Cortex-M3 MCU 72MHz | ST

The STMicroelectronics STM32F103VCT6 is a 32-bit ARM Cortex-M3 microcontroller running at up to 72 MHz with 256 KB Flash and 48 KB SRAM, housed in a 100-pin LQFP (14x14 mm) package. What is a microcontroller? A microcontroller (MCU) is a single-chip computer that integrates a processor core, memory, and programmable peripherals to govern a specific embedded operation. The STM32F103 series sits within the broader hierarchy of 32-bit Flash MCUs based on the Arm Cortex-M processor family and is one of the most widely deployed general-purpose MCU lines in industrial control, consumer electronics, and IoT devices. Key features include three 12-bit ADCs with up to 21 channels, two 12-bit DACs, and a rich communication set: three USARTs, two I2C, three SPI, one USB 2.0 full-speed device, one CAN 2.0B, and one SDIO interface. Advanced timers support PWM generation and motor control, while a 12-channel DMA controller offloads data movement from the CPU. The Cortex-M3 core executes the Thumb-2 instruction set with a hardware divide unit, delivering strong code density and deterministic interrupt handling through the nested vectored interrupt controller (NVIC). Debugging is supported via both JTAG and serial wire debug (SWD). The device operates from a 2.0 V to 3.6 V supply over an industrial -40C to +85C temperature range, with a real-time clock and low-power sleep, stop, and standby modes for battery-sensitive designs. Typical applications include motor control (advanced timers generate PWM while ADCs sample current feedback), industrial automation PLCs, and USB/CAN communication nodes in metering and gateways. Design consideration: configure BOOT0 correctly for the boot source and decouple every VDD/VSS pair with 100 nF capacitors; connect VDDA to a clean filtered analog supply for full ADC accuracy. This page adds value beyond the datasheet with verified drop-in alternatives, distributor pricing, and practical design notes.

USD $2.68 재고 있음
STM32F103VDT6 - 32-bit ARM Cortex-M3 MCU, 384KB Flash | STMicroelectronics
STM32F103VDT6

STM32F103VDT6 - 32-bit ARM Cortex-M3 MCU, 384KB Flash | STMicroelectronics

The STM32F103VDT6 is a high-performance 32-bit microcontroller from STMicroelectronics, based on the ARM Cortex-M3 core running at up to 72 MHz. It features 384 KB of Flash memory and 64 KB of SRAM, making it suitable for a wide range of embedded applications. The device is housed in a 100-pin LQFP package (LQFP100) and operates over a temperature range of -40°C to +85°C. An ARM Cortex-M3 microcontroller is a 32-bit RISC processor designed for embedded systems, offering a balance of performance, power efficiency, and rich peripheral integration. It is part of the ARM Cortex-M family, which is widely used in industrial control, consumer electronics, and IoT devices. The Cortex-M3 core includes a hardware multiply and divide unit, Nested Vectored Interrupt Controller (NVIC), and optional Memory Protection Unit (MPU), enabling deterministic and efficient real-time processing. Key features of the STM32F103VDT6 include a 72 MHz CPU with 1.25 DMIPS/MHz, 384 KB Flash, 64 KB SRAM, and a comprehensive set of peripherals: three 12-bit ADCs, four general-purpose 16-bit timers, two advanced-control timers, multiple communication interfaces (USART, SPI, I2C, CAN, USB), and a DMA controller. The device also includes a real-time clock (RTC), a CRC calculation unit, and a serial wire debug (SWD) interface. The STM32F103VDT6 is built on a 0.13 µm embedded Flash process, providing a good balance of performance and power consumption. It supports a wide supply voltage range of 2.0V to 3.6V, with multiple low-power modes (Sleep, Stop, Standby) to optimize energy usage. The rich peripheral set and large memory make it a versatile choice for complex applications. Typical applications include industrial control systems, motor drives, PLCs, medical devices, consumer electronics, and IoT gateways. The device's CAN interface and multiple timers make it particularly well-suited for automotive and industrial networking applications. When designing with this MCU, ensure proper decoupling of the power supply pins and a stable clock source. The internal RC oscillator can be used for basic operation, but an external crystal is recommended for applications requiring precise timing. The SWD interface should be brought out for programming and debugging.

USD $7.16 재고 있음
STM32F103VEH6 - 32-Bit 72MHz Cortex-M3 MCU | STMicroelectronics
STM32F103VEH6

STM32F103VEH6 - 32-Bit 72MHz Cortex-M3 MCU | STMicroelectronics

The STMicroelectronics STM32F103VEH6 is a 32-bit ARM Cortex-M3 microcontroller operating at up to 72 MHz, with 512 KB of Flash memory and USB, CAN, 11 timers, 3 ADCs, and 13 communication interfaces. The STM32F103VEH6 is supplied in a 100-pin LQFP package for high-density embedded control systems. Its combination of processing performance, analog peripherals, connectivity, and extensive I/O makes it suitable for industrial, communications, consumer, and mixed-signal applications where a single MCU can replace multiple discrete components. According to the manufacturer datasheet search result, the device belongs to the STM32F1 high-density performance line and supports 256 KB to 512 KB Flash configurations across the family. The part combines a 32-bit Cortex-M3 core with extensive serial peripherals and timing resources for real-time control. USB and CAN connectivity are especially useful for service interfaces, industrial links, diagnostics, and embedded network bridges. The 512 KB Flash capacity provides more room for application code, protocol stacks, bootloaders, and configuration data than smaller STM32F103 variants, while the 100-pin package exposes a broad set of GPIO and peripheral connections. Typical deployments include USB-to-serial bridges, industrial controllers, CAN nodes, sensor acquisition systems, motor-control platforms, and compact automation equipment. Designers should confirm the exact pin multiplexing, clock configuration, peripheral availability, and package dimensions against the official STM32F103xC, STM32F103xD, and STM32F103xE datasheet before final PCB release. This page combines manufacturer and distributor references, structured specifications, sourcing information, and design guidance.

USD $9.31 재고 있음