전력 관리
하위 카테고리
제품 (2822)
LP87702DRHBRQ1 - Dual Buck + 5V Boost PMIC for Radar | TI
The Texas Instruments LP87702DRHBRQ1 is a dual step-down DC/DC converter and 5-V boost PMIC with integrated diagnostic functions, engineered specifically for automotive camera and radar applications. Housed in a 32-pin VQFN (5x5 mm, RHB) package, this AEC-Q100 qualified device integrates two synchronous buck converters and a 5-V boost converter with two external voltage monitoring inputs and a window watchdog for functional-safety critical systems. The device operates from a wide input range suitable for automotive 12-V battery rails and supports safety-critical radar MMICs, FPGAs, and processors used in ADAS platforms. A PMIC (Power Management IC) is an integrated circuit that combines multiple voltage regulators and supervisory functions into a single package, simplifying board layout, reducing BOM count, and improving system-level reliability. Within the broader power-management hierarchy, a multi-rail PMIC sits above discrete LDOs and single-channel DC/DC converters, and the LP87702DRHBRQ1 specifically targets radar and camera SoC power trees where deterministic sequencing, fault monitoring, and a small PCB footprint are required. The integrated 5-V boost converter eliminates the need for an external pre-regulator when powering MMIC PA rails or image-sensor analog supplies. Key features include two high-efficiency synchronous buck converters, one boost output, window watchdog with programmable timing, two voltage monitors, output over-current and over-temperature protection, and a serial control interface for output-voltage margining. The device supports OTP-programmed default voltages per part-number variant, allowing different rails to be configured without external resistor dividers. A thermal shutdown block and under-voltage lockout complete the protection set. The compact 5x5 mm VQFN-32 package offers an exposed thermal pad to dissipate power from the boost stage under heavy radar load conditions. The LP87702's automotive-grade qualification (AEC-Q100 Grade 1, -40C to +125C) and integrated diagnostics make it suitable for safety-critical ADAS functions including front radar, surround-view cameras, and driver-monitoring systems. The window watchdog and voltage monitors support ISO 26262 functional-safety architectures by providing independent fault detection outside the host SoC. Typical applications include automotive radar power supplies (77-GHz front radar), surround-view and front-camera PMICs, ADAS ECU rails, and any multi-rail SoC requiring sequenced startup with supervisory diagnostics. Designers should verify OTP defaults for their specific SKU and budget boost-converter thermal dissipation when designing continuous-wave radar loads. When designing with this device, allocate sufficient copper area beneath the exposed pad to keep junction temperature within the AEC-Q100 envelope, and follow TI's recommended input/bulk capacitor network on the boost rail to suppress input ripple during radar chirp events. This page synthesizes distributor pricing, automotive-grade alternatives, and application-specific design notes not found in the manufacturer datasheet.
LP87721-Q1 - Automotive 3A 3-Channel Low-Noise Buck PMIC | Texas Instruments
The LP87721-Q1 from Texas Instruments is an automotive-grade, three-channel low-noise buck converter power management IC (PMIC) delivering up to 3A per channel, optimized for radar applications. It is available in a 24-pin VQFN-HR (4x4) package and is qualified to AEC-Q100 (Q1) standards. A PMIC, or Power Management IC, is a semiconductor device that integrates multiple voltage regulator channels, control logic, and sequencing functions into a single chip. It sits within the broader power management IC hierarchy, which is a subset of integrated circuits used to convert, regulate, and distribute power across a system. PMICs are essential for managing the multiple power rails required by processors, sensors, RF transceivers, and other analog and digital components. Key features of the LP87721-Q1 include three independent buck converter channels, each capable of sourcing 3A, a low-noise design for sensitive radar signal chains, and automotive qualification. The integrated MOSFETs and control circuitry reduce external component count, simplifying board design. The device supports a wide input voltage range, although specific values require verification from the datasheet. The compact VQFN-HR package enables space-constrained designs typical of in-vehicle radar modules. Architecturally, the LP87721-Q1 uses synchronous buck topology to achieve high efficiency, and the low-noise output is critical for maintaining radar signal integrity. The PMIC includes features for power sequencing, allowing controlled start-up of multiple rails. Detailed specifications such as switching frequency, output voltage accuracy, and quiescent current are documented in the TI datasheet (https://www.ti.com/product/LP87721-Q1). Typical applications include automotive radar front ends, advanced driver assistance systems (ADAS), driver monitoring systems, and industrial radar. The device is particularly suited for powering radar processors and sensors, where multiple clean 3A rails are required. Its AEC-Q100 qualification ensures reliable operation under harsh automotive conditions. When designing with the LP87721-Q1, pay attention to input and output capacitor selection to maintain stability and reduce noise. Ensure adequate PCB copper area for thermal dissipation, as the buck converters can dissipate significant power at high load. The sequencing feature should be utilized to maintain proper power-up order. For precise design guidance, refer to the TI application notes and reference designs.
LP87725-Q1 - Radar PMIC 3 Buck + LDO | Texas Instruments
The Texas Instruments LP87725-Q1 is a power management integrated circuit (PMIC) designed specifically for automotive and industrial mmWave radar sensors, including TI's AWR and IWR MMICs. It integrates three synchronous step-down DC/DC converters, one low-dropout linear regulator (LDO), and one load switch, providing five total regulated outputs in a compact 24-pin VQFN-HR (4x4) package. What is a power management IC? A PMIC is a specialized chip that sits between the battery or main power rail and the application processor or sensor, generating and sequencing the multiple supply voltages required by different sub-blocks. In a radar system, the PMIC must supply clean, tightly regulated rails to the RF transceiver, the digital baseband, and the analog front-end, with precise power-up sequencing to prevent latch-up or damage. Key features of the LP87725-Q1 include three buck converters with integrated FETs for high efficiency, an LDO for noise-sensitive analog supplies, and a load switch to turn off unused rails. It supports remote voltage sensing to compensate for IR drop between the regulator output and the point-of-load, improving output voltage accuracy. Programmable start-up and shutdown delays and sequences are synchronized to the ENABLE signal, simplifying power sequencing in multi-rail systems. The device is qualified for automotive applications (AEC-Q100, implied by the Q1 suffix) and is optimized to power the AWR/IWR MMICs used in advanced driver-assistance systems (ADAS) and industrial radar. Typical applications include automotive radar, industrial radar for traffic monitoring, drones, and proximity sensing. The compact VQFN package and integrated components reduce board space and simplify radar sensor module design. Design considerations include proper thermal management to dissipate heat from the buck converters, and careful PCB layout to minimize parasitic inductance and noise. The programmable sequencing feature must be configured to match the power-up requirements of the MMIC. For detailed design guidance, consult the LP87725-Q1 datasheet and the LP87725Q1EVM evaluation module.
LP8772x-Q1 - Automotive Radar PMIC | Texas Instruments
The Texas Instruments LP8772x-Q1 is a power management IC (PMIC) designed specifically for mmWave radar sensors. It integrates three synchronous buck converters, one linear regulator (LDO), and one load switch in a compact 24-VQFN-HR (4x4 mm) package. The device is AEC-Q100 qualified, making it suitable for automotive and industrial radar applications. It is intended to power AWR and IWR radar MMICs, providing the necessary power rails for RF front-ends, digital processors, and analog circuits. A PMIC (Power Management Integrated Circuit) is a system-level IC that manages multiple power rails, typically including DC-DC converters, LDOs, and load switches. It ensures that each subsystem receives the correct voltage, current, and sequencing. The LP8772x-Q1 belongs to a family of radar-specific PMICs that address the unique requirements of mmWave sensors, such as low noise for RF chains and precise power sequencing for radar MMICs. By integrating three buck converters, an LDO, and a load switch, the LP8772x-Q1 minimizes external component count and simplifies the power tree, reducing design complexity and PCB size. Key features include remote voltage sensing to compensate for IR drop between the regulator output and the point-of-load, programmable start-up and shutdown delays synchronized to the ENABLE signal, and an integrated watchdog timer for system monitoring. These features ensure accurate output voltage regulation and reliable operation. The 24-VQFN-HR package is compact and thermally efficient, with an exposed pad for heat dissipation. The Q1 suffix denotes AEC-Q100 qualification, which guarantees robust performance in harsh automotive environments. The three synchronous buck converters deliver high-efficiency step-down regulation for digital core and I/O rails, while the LDO provides a low-noise supply for noise-sensitive analog circuits. The load switch allows controlled power gating to reduce standby current. The integrated watchdog helps detect system faults and ensures safe operation. The device supports programmable sequencing, allowing the power rails to come up in the correct order when the ENABLE signal is asserted. Typical applications for the LP8772x-Q1 include automotive radar systems (AWR), industrial radar sensors (IWR), ADAS, traffic monitoring, and in-cabin occupant detection. The device is also used in UAV radar systems. Its flexible configuration and small footprint make it an ideal choice for space-constrained radar modules. When designing with the LP8772x-Q1, engineers should pay careful attention to input/output capacitance, layout for remote sensing, and thermal management. The programmable sequencing must be configured to match the radar MMIC's power requirements. For precise output voltages, use the remote sense lines with Kelvin connections. Ensure the watchdog is properly programmed to avoid false resets during normal operation.
LP8860-Q1 - 4-Ch 150mA Automotive LED Driver | TI
The Texas Instruments LP8860-Q1 is an automotive high-efficiency LED driver with an integrated boost controller, providing four high-precision current sinks rated at 150 mA per channel. It operates from a 3 V to 48 V input range and is available in a 32-pin HLQFP (7x7 mm) package, AEC-Q100 qualified for automotive applications. An LED driver is a power management IC that regulates current through LEDs to guarantee consistent brightness and protect against overcurrent. The LP8860-Q1 belongs to the boost LED driver family, which steps up a lower input voltage to the higher voltage demanded by LED strings, integrating boost control, current sinks, and dimming logic into a complete automotive display backlighting solution. Key features include hybrid PWM and current dimming, which reduces EMI, extends LED lifetime, and increases total optical efficiency. Phase-shift PWM reduces audible noise and output ripple. The switching frequency is adjustable from 100 kHz to 2.2 MHz with spread-spectrum operation, allowing designers to avoid AM radio band interference. Brightness can be controlled by a PWM input pin, an SPI or I2C master, or both, offering flexible system integration. The device employs adaptive output voltage control based on LED string headroom, minimizing power dissipation and maximizing efficiency. Comprehensive fault protection includes LED open/short detection, overvoltage protection, and overtemperature protection. The low-EMI architecture meets stringent automotive electromagnetic compatibility requirements. Typical applications include automotive infotainment displays, instrument clusters, and heads-up displays (HUD), where its wide input range and 4x150 mA capability suit 12 V automotive systems driving multi-LED strings. Design tip: ensure proper PCB layout with adequate copper area for thermal dissipation, place the boost inductor and capacitors close to the IC, and use the ISET pin resistor to set LED current precisely. Pricing as of 2026-08-29.
LP8861QPWPRQ1 - 4-Ch LED Driver, SEPIC/Boost, AEC-Q100 | TI
The Texas Instruments LP8861QPWPRQ1 is an automotive-grade, high-efficiency, low-EMI four-channel LED driver with an integrated boost/SEPIC DC-DC converter, housed in a 20-pin HTSSOP (PWP) power package with an exposed thermal pad. It delivers up to 100 mA per output with adaptive headroom control, and its switching frequency is programmable from 300 kHz to 2.2 MHz to balance EMI performance against inductor size. An LED driver is a specialized power-management IC that converts a higher-voltage DC rail into precisely regulated currents for one or more strings of LEDs. The LP8861-Q1 belongs to the LED driver IC category within the broader power-management IC family (LED driver → display/lighting driver → power management IC → integrated circuit). It differs from a generic constant-voltage regulator in that it regulates current, not voltage, which is critical because LED luminance is set by forward current and LED forward voltage varies with temperature and bin. Key features include four high-precision current sinks with PWM dimming input, spread-spectrum and adaptive-output-voltage operation to minimize power dissipation, and SEPIC/boost topology flexibility for 5 V to 24 V automotive battery systems. The Q1 suffix indicates AEC-Q100 qualification for automotive applications, and the device supports high dimming ratios for HUD, instrument-cluster, and rear-light functions. Its switching frequency range of 300 kHz to 2.2 MHz allows engineers to place the fundamental outside AM-band-sensitive frequencies for low-EMI compliance. Architecturally, the LP8861-Q1 uses an asynchronous boost/SEPIC controller driving an external MOSFET, with internal current sinks regulating each of the four LED strings. Adaptive output voltage minimizes the voltage drop across the current sinks, dramatically reducing power dissipation in the IC and improving total system efficiency. Fault protection includes LED open/short detection, thermal shutdown, and input undervoltage lockout. Typical applications include automotive infotainment displays, instrument-cluster backlighting, heads-up displays (HUD), and automotive exterior lighting such as daytime running lights and rear combination lamps. The wide 5 V to 24 V supply range accommodates cranking and load-dump transients typical of 12-V automotive electrical systems. When designing with the LP8861-Q1, careful inductor and input/output capacitor selection is critical because the device operates over a wide switching-frequency range. The exposed thermal pad must be soldered to a sufficiently large copper pour to keep junction temperature within automotive limits (typically ≤125 °C).
LP8869CQPWPRQ1 - 3-Ch 120mA Auto LED Driver | Texas Instruments
The Texas Instruments LP8869CQPWPRQ1 is an AEC-Q100 qualified, highly-integrated 3-channel 120-mA automotive LED driver with a built-in DC-DC converter supporting both boost and SEPIC topologies, housed in a 20-pin HTSSOP (PWP) power package with an exposed thermal pad. A LED driver IC is a power management device that regulates the current flowing through light-emitting diodes, ensuring consistent brightness, extended lifespan, and dimming control. Within the broader taxonomy, this part is a multi-channel constant-current LED driver, a sub-category of power management ICs that interfaces between a vehicle's electrical bus and the LED strings used in instrument panels, head-up displays, and infotainment screens. Automotive LED drivers must meet stringent EMI and temperature requirements defined by AEC-Q100 and OEM-specific standards, and they typically integrate fault protection, PWM dimming, and spread-spectrum modulation to comply with CISPR 25 conducted/radiated emissions. The LP8869CQPWPRQ1 delivers 120 mA per channel across three high-precision current sinks that can be paralleled for higher current, achieving a typical current matching of 1%. Key features include a high dimming ratio of 10,000:1 at 100 Hz, an input voltage range of 4.5 V to 40 V with load-dump tolerance up to 45 V, an internal switching frequency range of 300 kHz to 2.2 MHz, and integrated protections including under-voltage, over-voltage, and over-temperature. The HTSSOP-20 package with exposed pad keeps junction temperature within the automotive grade 1 range of -40 °C to +125 °C. Internally, the device uses an asynchronous current-mode control loop for the boost/SEPIC converter, with adaptive output voltage control that minimizes power dissipation by adjusting VOUT to the minimum required for the LED forward voltages. The integrated MOSFETs, current sinks, and PWM dimming logic are designed to reduce EMI through spread-spectrum frequency modulation and careful gate-edge control, enabling CISPR 25 Class 5 compliance in typical automotive display backlight topologies. Typical applications include automotive LCD display backlighting for instrument clusters, center-stack displays, and head-up displays, as well as interior ambient lighting and small-form-factor automotive lighting where wide input range, low EMI, and high dimming ratio are simultaneously required. When designing with the LP8869CQPWPRQ1, ensure that the switching frequency is selected away from AM radio bands (typically > 1.7 MHz) and that the input bulk capacitance is sized to handle the worst-case cold-crank and load-dump transients specified by ISO 7637-2. This page synthesizes real-time distributor pricing, qualified drop-in alternatives, and practical automotive EMI design notes not found in the manufacturer datasheet alone.
LR1107G-18-AA3-A-R - 1.8V 600mA Ultra LDO Regulator | UTC
The Unisonic Technologies LR1107G-18-AA3-A-R is a 600 mA fast ultra-low-dropout (LDO) linear regulator with a fixed 1.8 V output, housed in a 4-pin SOT-223 (AA3) surface-mount package. It operates from a +2.5 V to +7.0 V input supply and targets low-voltage microprocessor and portable-power applications where fast transient response and a low quiescent current are required. The fixed-output (-18) variant delivers a nominal VOUT of 1.8 V, with the wider LR1107 family offering other fixed rails from 1.145 V up to 5 V via the SET/ADJ pin. An LDO (Low-Dropout) linear regulator is a type of voltage regulator that maintains a stable output voltage even when the input voltage is only marginally above the output voltage. Within the broader power-management taxonomy, LDOs sit under linear regulators, which sit under voltage regulators, which are themselves part of the power-management integrated-circuit family. LDOs differ from switching regulators in that they dissipate excess voltage as heat rather than storing energy in an inductor, trading efficiency for very low output noise - a valuable trait for analog, RF, and digital-core rails. Key features of the LR1107G-18-AA3-A-R include a typical dropout of around 200 mV at full 600 mA load, a ground-pin current of roughly 150 uA at 1 mA load, and a fast transient response that makes it suitable for low-voltage microprocessor cores. It also includes built-in thermal protection, current limiting, and an ERROR flag (open-drain) for power-rail monitoring, which is useful in multi-rail systems that need to detect a brown-out condition. Typical applications include 1.8 V core supplies for low-voltage DSPs and microprocessors, post-regulation after a switching converter for noise-sensitive analog blocks, USB-powered portable devices, and 3.3 V-to-1.8 V point-of-load conversion in FPGA or microcontroller designs. The SOT-223 package provides a tab that can be soldered to a copper pour to extend continuous output current while keeping the footprint compact. When designing with this part, observe the maximum input voltage of 7.0 V and confirm that VIN - VOUT remains above the dropout threshold under worst-case load. The ERROR pin requires an external pull-up resistor, and the SET/ADJ pin (on adjustable variants of the same family) must be tied through a resistor divider when used. This page synthesizes distributor pricing for the LR1107G-18-AA3-A-R, real drop-in alternatives from the same Unisonic Technologies family and competitor catalogs, and practical PCB-level design notes not consolidated on any single manufacturer page.
LR8N8-G - 450V, 20mA Adjustable Linear Regulator | Microchip
The Microchip Technology LR8N8-G is a high-input-voltage, adjustable, 3-terminal linear regulator housed in a TO-243AA (SOT-89) surface-mount package. According to the Microchip datasheet, it accepts an input voltage range of 13.2 V to 450 V and delivers an adjustable output of 1.20 V to 438 V, provided that VIN is at least 12 V greater than VOUT, with a maximum output current of 20 mA (typical 10 mA). An adjustable linear regulator is a type of analog voltage regulator whose output is set by an external resistor divider rather than a fixed internal reference. Within the broader power-management hierarchy, the LR8 sits in the linear regulator (LDO-class) family, which itself is a subset of voltage regulators. Linear regulators dissipate the difference between input and output as heat rather than switching it, trading efficiency for very low output noise and minimal EMI. The LR8 specifically targets the niche of high-voltage bias rails where most general-purpose LDOs cannot operate. Key features include a 5% output voltage tolerance, integrated output current limiting, a typical ADJ pin bias current of 10 µA, and internal junction temperature protection. Because the device is a 3-terminal part (IN, OUT, ADJ) in the same SOT-89 footprint as a conventional low-voltage regulator, it offers a drop-in, compact solution for offline-derived auxiliary rails without the complexity of a switching converter. Typical applications include biasing of IGBT/SiC gate drivers in motor drives, bias for solid-state relay (SSR) and opto-coupler LED drivers, offline LED string drivers, and as an auxiliary supply for industrial control boards tapped from a 120/230 VAC or 380 VDC bus. When designing with the LR8N8-G, plan thermal dissipation carefully: at 400 V input and a 1 mA load, the device still dissipates the full VIN minus VOUT drop. The SOT-89 package has limited thermal mass, so always verify worst-case junction temperature using the datasheet's theta_JA value and the actual PCB copper area. This page synthesizes distributor inventory, parametric cross-references, and engineering design notes - information not assembled in any single manufacturer datasheet - to accelerate sourcing and first-pass design decisions for the LR8N8-G.
LS2406ERQ23 - 24V/6A eFuse with True RCB & Fast Role Swap
The Littelfuse LS2406ERQ23 is an advanced 28 V, 6 A rated electronic fuse (eFuse) protection IC that integrates a 24 mΩ ultra-low RDS(ON) power switch with comprehensive fault management in a compact 16-pin QFN (2.5 × 3.2 mm) package. It delivers current-limit, short-circuit, input-voltage surge, excessive inrush, over-temperature, and all-time reverse-current blocking protections to the system downstream of the switch, regardless of the EN logic state. An eFuse (semiconductor-based protection IC) is a solid-state replacement for traditional fuses and PTC resettable devices. It sits between a system power rail and its downstream load, monitoring current, voltage, and temperature and disconnecting the path when an abnormal condition is detected. eFuses belong to the broader hierarchy of power-path protection -> hot-swap controllers / load switches -> power-management ICs, and are preferred over fuses because they offer programmable thresholds, fast re-insertion, and telemetry flags for the host MCU. Key features of the LS2406ERQ23 include an adjustable current limit up to 6 A set by an external resistor, true reverse-current blocking (RCB), a fast role swap (FRS) function compatible with the USB Power Delivery Specification timing, thermal fold-back, and over-temperature shutdown. The 24 mΩ on-resistance minimises I²R conduction loss during normal operation, improving efficiency in battery-powered and adapter-powered designs. The device uses a low-side N-channel pass-FET topology with an integrated charge pump, allowing it to block current in both forward and reverse directions. Its programmable soft-start and inrush-current limiting protect upstream sources from load-step transients, and the FLAG/PGOOD pin provides real-time fault telemetry. The 16-QFN package offers a low thermal resistance path, suitable for 6 A continuous operation with adequate PCB copper. Typical applications include USB Type-C / USB PD source and sink ports, notebook and tablet charging subsystems, hot-swap bay protection in industrial PCs, multi-port wall adapters, and any 5 V to 20 V rail that must survive hot-plug events and unexpected reverse-current injection. When designing with the LS2406ERQ23, size the input and output capacitors per the datasheet to suppress transient ringing during fast role-swap events. Ensure sufficient copper area beneath the exposed pad to keep junction temperature below the thermal fold-back threshold at worst-case VIN and IOUT. This page synthesizes distributor pricing, same-brand and cross-brand drop-in alternatives, and practical PCB-layout design notes that go beyond the manufacturer datasheet, helping engineers shortlist a validated protection IC for USB PD and hot-swap designs.
LT1076CQ - 2A Step-Down Switching Regulator | Analog Devices
The LT1076CQ is a monolithic bipolar step-down switching regulator from Analog Devices (formerly Linear Technology) that delivers up to 2A of switch current in a TO-263-6 (D2PAK) package. It operates as a buck, boost, or flyback converter with positive or negative output polarity, and features an adjustable output voltage starting from 2.5V. The device integrates the power switch, oscillator, control circuitry, and current limit components on a single chip, requiring only a few external parts for normal operation. A switching regulator is a voltage regulator that uses a switching element (transistor) to convert an input voltage to a desired output voltage with high efficiency, typically above 80%. Unlike linear regulators, switching regulators store energy in inductors and capacitors and switch the element on and off at a high frequency (100kHz for the LT1076) to control the output. This makes them ideal for applications where power dissipation and heat are concerns, such as battery-powered devices and industrial power supplies. Key features of the LT1076CQ include a 100kHz switching frequency, 8.5mA quiescent current, programmable current limit, and the ability to operate with input voltages up to 60V. The device also includes micropower shutdown for power saving. The TO-263-6 package provides excellent thermal performance with a low thermal resistance, enabling high power dissipation without external heatsinks in many applications. The LT1076CQ uses a classic positive buck topology but includes design innovations that allow it to be used as a positive-to-negative converter (flyback) and in boost configurations. The internal current limit is set at 2.6A (for the LT1076), and the oscillator frequency is preset at 100kHz, which balances efficiency and component size. The device is designed for rugged industrial environments, with a junction temperature range of -40°C to +125°C. Typical applications include industrial power supplies, battery chargers, distributed power systems, and automotive electronics. Its wide input voltage range and high efficiency make it suitable for systems that require step-down conversion from 24V or 48V buses. The LT1076CQ is also used in negative output applications, such as generating -5V from a positive input. When designing with the LT1076CQ, ensure proper input and output capacitor selection and inductor sizing to maintain stability and low ripple. The programmable current limit allows designers to set the maximum switch current to protect the circuit. The device is available in lead-free (PBF) and tape-and-reel (TR) options, and is RoHS compliant.
LT1076CQ#PBF - 2A Buck/Boost/Flyback Regulator | Analog Devices
The LT1076CQ#PBF is a monolithic bipolar switching regulator from Analog Devices (formerly Linear Technology) that delivers up to 2A of switch current in a TO-263-6 (D2PAK) package. It supports buck, boost, flyback, and inverting topologies with an adjustable output voltage from 2.5V to 50V. The device integrates the power switch, oscillator, control circuitry, and current limit components, requiring only a few external parts for operation. With a 100kHz switching frequency and current-mode PWM control, it offers excellent dynamic response and stability. A switching regulator is a voltage regulator that uses an inductor, switch, and diode to efficiently convert an input voltage to a desired output voltage. Unlike linear regulators, switching regulators achieve high efficiency by storing energy in the inductor and switching the power transistor on and off. The LT1076CQ#PBF belongs to the family of DC-DC converters, which are essential in power management systems for converting voltages in battery-powered devices, industrial equipment, and automotive electronics. Key features of the LT1076CQ#PBF include a 2A switch current rating, wide input voltage range up to 60V, and the ability to operate in multiple topologies. The current-mode control architecture provides inherent cycle-by-cycle current limiting and simplifies loop compensation. The device also features thermal shutdown and a low quiescent current, making it suitable for power-sensitive applications. The LT1076CQ#PBF uses a bipolar process technology, which provides robust performance and high reliability. The 100kHz switching frequency balances efficiency and component size, allowing for compact inductor and capacitor selections. The device's adjustable output voltage range of 2.5V to 50V provides flexibility for various output requirements. Typical applications include industrial power supplies, battery chargers, distributed power systems, and automotive electronics. The device's ability to step up, step down, or invert voltage makes it a versatile choice for many power conversion needs. When designing with the LT1076CQ#PBF, ensure proper PCB layout with short, low-inductance paths for the switch node and ground. Use appropriate input and output capacitors to minimize ripple and ensure stability. The thermal pad of the D2PAK package should be connected to a large copper area for heat dissipation.
LT1076CQ#TRPBF - 2A Buck/Boost/Flyback Regulator | Analog Devices
The LT1076CQ#TRPBF is a monolithic bipolar switching regulator from Analog Devices, rated for 2A switch current and designed for buck, boost, and flyback topologies. It operates from input voltages up to 45V and provides an adjustable output from 2.5V to 50V. The device integrates the power switch, oscillator, control circuitry, and current limit components on a single chip, requiring only a few external parts for normal operation. Housed in a TO-263-6 (D2PAK) package with 5 leads plus tab, it is suitable for surface-mount designs. A switching regulator is a voltage regulator that uses a series element that switches between on and off states to maintain a constant output voltage. Unlike linear regulators, switching regulators achieve high efficiency by storing energy in inductors and capacitors, making them ideal for applications where power dissipation and battery life are critical. The LT1076 belongs to the family of monolithic switching regulators, which integrate the control circuitry and power switch into a single IC, simplifying design and reducing component count. Key features of the LT1076CQ#TRPBF include a 2A switch current rating, a wide input voltage range of 7.3V to 45V, and an adjustable output voltage from 2.5V to 50V. The device operates at a switching frequency of 100kHz, balancing efficiency and component size. It also includes an output monitor and current limit protection, enhancing reliability in demanding applications. The TO-263 package provides excellent thermal performance, with a low thermal resistance that supports continuous operation at high load currents. Technically, the LT1076 uses a classic positive buck topology but includes design innovations that allow it to be configured as a positive-to-negative converter or a flyback converter. The internal oscillator and control circuitry are designed for stable operation across a wide range of input and output conditions. The device's bipolar process technology ensures robust performance and long-term reliability, making it a trusted choice for industrial and automotive power supplies. Typical applications include distributed power systems, battery chargers, and point-of-load converters. The LT1076 is particularly well-suited for industrial control systems, telecom equipment, and automotive electronics where a rugged, high-efficiency switching regulator is required. Its ability to handle both step-down and step-up configurations adds versatility to power supply designs. When designing with the LT1076CQ#TRPBF, ensure proper input and output capacitor selection to minimize ripple and maintain stability. The inductor value should be chosen based on the desired ripple current and switching frequency. Adequate PCB copper area is essential for thermal management, especially at high output currents.
LT1086CT-3.3 - 1.5A, 3.3V Fixed LDO | Analog Devices | TO-220
The Analog Devices (formerly Linear Technology) LT1086CT-3.3 is a 1.5 A low-dropout (LDO) positive fixed 3.3 V linear regulator in a 3-pin TO-220 package. The device belongs to the LT1086 family, which also includes adjustable (LT1086), 2.85 V, 3.6 V, 5 V, and 12 V fixed-output variants, all sharing the same TO-220-3 / TO-3P / TO-247-3 pinout. An LDO (low-dropout) linear regulator is a type of voltage regulator that maintains a stable output voltage even when the input supply voltage is only slightly higher than the output - typically 1.05 V to 1.5 V of dropout. LDOs sit within the broader category of linear regulators, which in turn are a subset of voltage regulators and ultimately of power management integrated circuits (PMICs). Unlike switching regulators, an LDO adds no switching noise to the output but dissipates the voltage difference (VIN - VOUT) x IOUT as heat. Key features of the LT1086CT-3.3 include a 1.5 A maximum output current, fixed 3.3 V output (±1% or ±2% accuracy depending on grade), line/load regulation typically 0.05%, and ripple rejection exceeding 75 dB even at full 1.5 A load. The composite NPN output stage and floating architecture allow all quiescent current to flow to the load, increasing efficiency. The device is pin-compatible with older 3-terminal adjustable regulators such as the LM317 and LM350, simplifying retrofit designs. Internally, the LT1086 uses a bandgap reference, an error amplifier, and a composite NPN pass element. All quiescent current flows to the load, which boosts efficiency at heavy loads. The reference is trimmed at the wafer stage, so no external adjustment resistor network is required for the fixed-voltage suffix devices - reducing external component count. Typical applications for the LT1086CT-3.3 include powering 3.3 V logic rails from a 5 V bus, post-regulation after a switching converter (to remove switching ripple), battery-powered systems, and industrial 24 V → 3.3 V conversion where a 5-10 V headroom is acceptable. It is also widely used as a 3.3 V auxiliary supply for microcontroller and DSP subsystems. When designing with this part, ensure the input-to-output differential stays within the absolute maximum rating and provide at least a 10 µF output capacitor for stability. A small heatsink is recommended when (VIN - VOUT) x IOUT exceeds 2-3 W because the TO-220 thermal resistance typically limits dissipation to 15-20 W without airflow. This page synthesizes distributor pricing, drop-in alternatives, and practical design notes not found in the manufacturer datasheet.
LT1129IQ - 700mA Micropower LDO Regulator with Shutdown | ADI
The Analog Devices LT1129IQ is a micropower low-dropout (LDO) linear regulator with shutdown, delivering up to 700 mA of output current with a 400 mV dropout voltage in a 5-lead DDPAK package. Designed for battery-powered systems, it operates from a wide input voltage range of 4.5 V to 30 V and provides adjustable output from 3.8 V to 30 V. An LDO (Low-Dropout) linear regulator is a type of voltage regulator that maintains a stable output voltage even when the input voltage approaches the output voltage, with dropout voltage being the minimum VIN-VOUT differential required to maintain regulation. LDOs sit within the broader hierarchy of linear regulators, which in turn are part of the power management IC family of semiconductors. They are preferred over switching regulators in noise-sensitive applications because they introduce no switching ripple. Key features include 0.4 V dropout voltage at full 700 mA load, 50 µA quiescent current during normal operation, 16 µA quiescent current in shutdown mode, and the absence of required protection diodes. The device is stable with only 3.3 µF of output capacitance, significantly less than older regulators that require 10–100 µF, simplifying board design and reducing BOM cost. The LT1129IQ uses a PNP pass transistor architecture that achieves low dropout while maintaining controlled quiescent current in dropout conditions. Reverse-battery protection is built in: the input may be connected to ground or a reverse voltage without reverse current flow from output to input, a critical feature for automotive and battery applications. Typical applications include battery-powered portable instruments, post-regulators for switching supplies, automotive electronics, point-of-load regulation, and handheld instrumentation requiring long battery life. The wide 30 V input range also makes it suitable for industrial 24 V bus systems. When designing with this part, pay attention to thermal management. At VIN = 24 V, VOUT = 5 V, and 700 mA load, the LT1129IQ dissipates approximately 13.3 W. The DDPAK-5 package requires substantial copper area or a heatsink to keep junction temperature within the 125 °C operating limit. This page synthesizes distributor pricing, drop-in alternatives, and practical design notes not found in the manufacturer datasheet.
LT1185CQ - 3A Low Dropout Regulator, Adjustable, DDPAK-5 | Analog Devices
The Analog Devices LT1185CQ is a 3A low-dropout (LDO) linear regulator with adjustable current limit and remote sense capability, housed in a 5-pin DDPAK surface-mount package. It features 2.5V to 25V adjustable output range, ±1% reference accuracy, 0.25 ohm pass transistor, and can be configured as either a positive regulator with floating input or a standard negative regulator with grounded input. An LDO (low-dropout) linear regulator is a type of voltage regulator that maintains a stable output voltage even when the input voltage approaches the output voltage. LDOs sit within the broader hierarchy: LDO -> linear regulator -> voltage regulator -> power management IC -> semiconductor. The LT1185 belongs to the NPN-pass-transistor family, where a saturation-limited NPN device is used as the pass element - this trades efficiency for very low dropout voltage compared to PNP designs. Key specifications include 3A continuous output current, 0.25 ohm on-resistance of the internal pass transistor, 2.5mA typical quiescent current, programmable current limit, and full remote sense capability for accurate regulation at the load. The device also offers a shutdown pin for power sequencing, internal 1.25V reference, and good high-frequency ripple rejection. The DDPAK-5 (TO-263 style) package with tab provides low thermal resistance for high-current dissipation. The LT1185 uses a bipolar architecture with the saturation-limited NPN pass transistor. This topology yields very low dropout (input-to-output differential) while providing robust current-limit behavior. The reference is trimmed to ±1%, and the current-limit comparator can be programmed with a single external resistor, allowing the designer to optimize protection for the load and the pass transistor under fault conditions. Typical applications include post-regulation for switching converters (where the LDO cleans up switching ripple), industrial 24V-bus regulation, high-current instrumentation supplies, and negative-rail regulation in telecom systems. The wide input range supports automotive and industrial transients, while the remote-sense pins eliminate IR drops in long PCB traces. When designing with the LT1185, account for the 2.5mA quiescent current that flows even at no-load - this impacts battery-powered applications. The remote-sense pins must be tied directly to the load for best accuracy; do not leave them disconnected. This page synthesizes distributor pricing, drop-in alternatives, and practical design notes not found in the manufacturer datasheet alone.
LT1236ACS8-5 - 5V Precision Buried Zener Reference | Analog Devices
The Analog Devices LT1236ACS8-5 is a precision, low-noise buried-Zener voltage reference delivering a fixed 5.000 V output with ±0.05% initial accuracy and 10 mA of source/sink capability in an 8-pin SOIC package. The device combines ultralow drift, low wideband noise and excellent long-term stability without using on-chip heaters, making it a drop-in upgrade for legacy 5 V references such as the LT1021-5 and AD586 family. What is a buried-Zener voltage reference? A buried-Zener reference uses a subsurface avalanche breakdown junction rather than a bandgap or surface Zener. The subsurface architecture eliminates surface breakdown noise and stability problems, and delivers better temperature drift and time stability than even the best bandgap references. In the power-management IC hierarchy, voltage references sit alongside LDO regulators, supervisors and ADC/DAC converters, providing the precision DC anchor that every high-accuracy analog signal chain requires. Key specifications include 5 ppm/°C maximum temperature coefficient (C-grade), 4 ppm p-p noise (0.1 Hz to 10 Hz), 1.5 µVrms wideband noise, ±0.05% initial accuracy, 10 mA output current with source/sink capability, and 7.2 V to 40 V supply range. The LT1236 series is also nearly immune to input voltage variations due to its high PSRR. Architecturally, the LT1236 uses an on-chip buried-Zener diode, a temperature-compensation network, and a buffered output stage capable of both sourcing and sinking current. The dual output-capable topology allows the 10 V variant to operate as a shunt regulator (two-terminal Zener) with the same precision specifications, while the 5 V variant operates as a series reference with VIN headroom of 7.2 V minimum. Typical applications include high-resolution 16-/18-bit ADC and DAC reference inputs, precision instrumentation and digital multimeters, industrial process control loops, weigh scales and strain-gauge bridges, and precision voltage regulators. Designers also use it as a system-wide calibration reference in test-and-measurement equipment. When designing with the LT1236ACS8-5, respect the 7.2 V minimum supply and use a 1 µF to 10 µF output capacitor close to the VOUT pin for stability. Decouple VIN with 0.1 µF in parallel with 1 µF, keep trace capacitance on the noise-reduction (NR) pin minimal, and avoid sinking more than 10 mA continuously to prevent self-heating drift. This page synthesizes Analog Devices datasheet specifications, distributor pricing, drop-in cross-references and practical PCB design notes that are not found in the standalone manufacturer datasheet PDF, giving engineers a single source for selection, sourcing and board-level implementation.
LT1248CS#PBF - PFC Controller, 300 kHz, 16-SOIC | Analog Devices
The Analog Devices LT1248CS#PBF is a fixed-frequency current-averaging Power Factor Correction (PFC) controller IC housed in a 16-pin SOIC package, optimized for universal off-line power systems operating from rectified 85 VAC to 265 VAC mains. It delivers up to 300 kHz switching frequency with an adjustable oscillator, supports a wide 11.5 V to 25 V supply range, and provides active PFC with low-distortion AC line-current shaping for SMPS front ends. A Power Factor Correction (PFC) controller is a specialized analog/mixed-signal IC that conditions the input current drawn from the AC mains so that it is in phase with the input voltage, presenting a near-unity power factor to the utility. Within the broader power-management hierarchy, PFC controllers sit between the rectifier bridge and the bulk capacitor, preceding the downstream DC-DC converter. The LT1248 uses fixed high-frequency PWM current averaging (rather than peak-current detection or zero-current switching), eliminating slope-compensation requirements and enabling smaller magnetic components with lower line-current distortion across both continuous and discontinuous conduction modes. Key features include 8.5 mA typical supply current, a 96% maximum duty cycle, an internal 11.5 V undervoltage-lockout (UVLO) threshold, and built-in protection for overcurrent and soft-start sequencing. The current-averaging loop eliminates the subharmonic instabilities that plague peak-current-mode PFC stages, and the device maintains <5% THD in well-designed 100 W to >1 kW boost converters. The 16-lead SOIC (wide-body, S16 package) footprint is the industry-standard pinout for legacy PFC controllers. Typical applications include PFC front stages for desktop PC silver-box supplies, telecom rectifiers (48 V), industrial SMPS with EN61000-3-2 compliance, and high-end audio amplifiers. The wide 300 kHz capability allows the use of small ferrite boost inductors versus legacy 50 kHz iron-powder designs, reducing overall converter size and weight. Design with the LT1248 by ensuring Vsense feedback compensation is tuned for the chosen inductor and output voltage. The Vc-to-Imo gain sets the current-loop crossover; design for a crossover of roughly one-tenth of the switching frequency to avoid line-frequency harmonic distortion. Use a 1 nF to 10 nF soft-start capacitor to limit inrush. This page synthesizes verified distributor pricing, datasheet-derived parametric values, drop-in pin-compatible alternates, and design notes beyond the manufacturer datasheet, helping power engineers evaluate, source, and lay out an LT1248-based PFC stage.
LT1248IS#PBF - PFC Controller, 300kHz Average Current, 16-SOIC | Analog Devices
The Analog Devices (formerly Linear Technology) LT1248IS#PBF is an active power factor correction (PFC) controller IC that uses fixed high-frequency PWM current averaging and operates at up to 300 kHz switching frequency, housed in a 16-pin SOIC narrow-body package. Headline parameters include a 15.5 V to 27 V supply range, 250 µA typical startup current, and an internal 11.5 V lockout threshold for safe bootstrap supply design in offline converters. A PFC (Power Factor Correction) controller is a power management IC that shapes the input current of an AC-DC power supply so that it is in phase with and proportional to the AC line voltage, forcing the load presented to the utility to look resistive. Active PFC controllers such as the LT1248 are part of the broader AC-DC controller family, which also includes PWM controllers and current-mode controllers; together they form a key segment of the power management IC market. Active PFC has largely displaced passive PFC in switched-mode power supplies above ~75 W because it achieves near-unity power factor with smaller magnetics. Key features include average-current-mode control (which eliminates the slope-compensation burden imposed by peak-current controllers), instantaneous overvoltage protection, high power factor across a wide load range, and a minimum/maximum frequency clamp architecture. The 300 kHz capability permits smaller boost inductors and EMI filters compared to legacy 100 kHz PFC designs. The part is intended for universal off-line input (85 VAC to 265 VAC) and supports both continuous-conduction-mode (CCM) and discontinuous-conduction-mode (DCM) operation without topology change. Typical applications include 100 W to >1 kW AC-DC switched-mode power supplies that must comply with EN61000-3-2 harmonic-current limits, industrial SMPS for motor drives, telecom rectifier front ends, server and workstation power supplies, and high-end audio amplifiers with PFC front ends. The wide bandwidth of the current loop simplifies magnetics design and yields a smaller inductor than competitive peak-current or zero-current-switching approaches. When designing with this device, ensure the VCC bypass capacitor and the current-sense filter network follow the values given in the typical application circuit; the IS pin input range and the VAUX bootstrap supply must be sized so that VCC never collapses below the 11.5 V UVLO threshold during line dropouts. A 1% tolerance multiplier resistor on the MULT pin is recommended to keep THD within regulatory limits across line and load. This page synthesizes distributor pricing, drop-in alternatives, and practical design notes not found in the manufacturer datasheet, providing engineering context beyond the bare part number. Engineers can use this document to evaluate pin-compatible replacements, estimate junction temperature under CCM boost operation, and select an EMI filter that complies with EN55022 Class B given the chosen switching frequency.
LT1374CR - 4.5A 500kHz Buck Switch Reg | Analog Devices
The Analog Devices LT1374CR is a 500 kHz monolithic buck-mode switching regulator that integrates a 4.5 A internal power switch together with the oscillator, control logic and protection circuitry on a single die. Housed in a 7-lead TO-263 (DDPAK) package with thermal tab, it accepts a 5 V to 25 V input range and delivers an adjustable output from 2.42 V to 21.5 V, making it a true drop-in successor to the classic Linear Technology LT1074/LT1076 family of high-current step-down regulators. A buck (step-down) switching regulator is a switched-mode DC-DC converter that uses an inductor, a power switch, and a rectifier to transfer energy from a higher input rail to a lower output rail at high efficiency. The LT1374CR belongs to the broader hierarchy of voltage regulators -> DC-DC converters -> switching regulators -> power management ICs. The 500 kHz constant switching frequency permits a small 1.8 µH saturating inductor and all-ceramic input/output capacitors, simplifying the bill of materials and shrinking the solution footprint compared to 100-200 kHz predecessors. Key features include a 0.07 ohm saturating internal NPN switch for low dropout loss, 2.5 mA quiescent supply current, 20 µA shutdown current, current-mode topology for fast transient response and good loop stability, and full cycle-by-cycle short-circuit protection. The device is offered in both fixed 5 V output (LT1374CR-5) and adjustable (LT1374CR) versions, with optional shutdown/synchronization via the LT1374CR-SYNC variant. The exposed thermal tab provides a low theta-JA path to dissipate up to several watts at full 4.5 A load. The current-mode architecture samples inductor current each cycle and feeds it into a PWM comparator against the error amplifier output, giving inherent line-rejection and a single-pole compensation network. Synchronization to an external 600 kHz clock is supported on SYNC parts, allowing multiple regulators to phase-lock and reduce input RMS ripple. Thermal shutdown and cycle-by-cycle current limiting protect against output shorts and overload conditions, while the wide 5 V to 25 V VIN range covers 12 V and 24 V industrial bus rails without a preregulator. Typical applications include 5 V to 12 V distributed power systems, industrial 24 V bus converters, automotive accessory power (with appropriate transient protection), battery chargers, and distributed point-of-load regulation for FPGAs, DSPs, and microcontrollers. A high-current variant such as the LT1374CR is especially valuable where a discrete switching controller plus external MOSFET would otherwise occupy too much PCB area. When laying out the LT1374CR, keep the input ceramic bypass capacitor within 5 mm of the VIN pin, use a low-ESR inductor rated for 5 A saturation, and connect the exposed tab to a 1 square-inch copper pour for thermal relief. Watch the maximum VIN rating of 25 V and provide a TVS or fuse for inductive load transients on industrial rails. SYNC and fixed-5-variants share the same 7-pin DDPAK footprint for PCB reuse. This page synthesizes distributor pricing, drop-in alternatives, and practical design notes not found in the manufacturer datasheet alone, giving procurement engineers and designers a single source for LT1374CR decisions.
LT1461CIS8-5 - 5V 100mA Micropower LDO Voltage Reference | ADI
The Analog Devices LT1461CIS8-5 is a fixed 5V output, micropower precision low-dropout series voltage reference IC delivering up to 100 mA of output drive in an 8-pin SOIC package. It combines ±0.08% initial accuracy with low temperature drift and draws only 35 µA of quiescent supply current, making it ideal for battery-powered and precision instrumentation designs. A series voltage reference is a three-terminal device that maintains a stable, temperature-independent output voltage independent of supply, load, and temperature variations. It sits at the bottom of the power management hierarchy, below linear regulators and DC-DC converters, and serves as the precision voltage anchor for ADCs, DACs, and precision data-acquisition systems. Voltage references are characterized by initial accuracy (error at 25 °C), temperature coefficient (drift in ppm/°C), long-term stability, noise density, and load/line regulation. Key specifications of the LT1461CIS8-5 include ±0.08% initial output accuracy (max), a low dropout of approximately 0.45 V at 100 mA load, 35 µA quiescent current, and high output drive capable of sourcing 100 mA continuously. Curvature-compensated bandgap architecture and trimmed thin-film resistors achieve the headline accuracy without external calibration, while the wide input supply range supports single-cell Li-Ion to industrial 24 V bus operation with adequate headroom. The LT1461 uses advanced curvature-compensated bandgap architecture with precision-trimmed thin-film resistors. This topology eliminates the typical parabolic temperature error of uncompensated bandgap references, resulting in low drift over the full industrial temperature range. The high output drive and low supply current are unusual to find together, and the device's tight line/load regulation keep the 5V reference stable under dynamic load transients. Typical applications include precision ADC and DAC reference inputs, industrial process control loop references, battery-powered instrumentation, portable data loggers, and automotive sensor signal conditioning. Its 100 mA drive also allows it to directly power multiple low-current analog rails in distributed measurement systems. When designing with this device, ensure the input supply provides at least 0.45 V of dropout headroom above 5 V under worst-case load. A 0.1 µF to 1 µF ceramic bypass capacitor placed close to the supply pin and a 1 µF to 10 µF output capacitor are recommended to ensure stability and to minimize load-transient ringing. This page synthesizes distributor pricing, drop-in same-package alternatives, and practical design notes not consolidated in any single manufacturer datasheet, giving engineers a single source to evaluate the LT1461CIS8-5 for new designs and as a drop-in replacement on existing PCBs.
LT1461DHS8-5#PBF - 5V Micropower Precision LDO Voltage Reference | Analog Devices
The Analog Devices LT1461DHS8-5#PBF is a fixed 5 V, micropower precision low-dropout series voltage reference in an 8-pin NSOIC-8 (SOIC-8) surface-mount package, combining ±0.15% initial accuracy with low drift and 50 mA minimum output drive. It is part of the LT1461 series of band-gap references that use advanced curvature compensation and precision thin-film resistors to deliver trimmed high output accuracy. The "#PBF" suffix designates a lead-free, RoHS-compliant termination finish supplied on a tube. A voltage reference IC is a precision circuit that produces a stable, known DC voltage used as an absolute reference for ADCs, DACs, power supplies, and sensor signal-conditioning paths. Within the power management IC family, series-mode references are preferred over shunt references when the load current varies, because the regulator absorbs the difference between input and load current and rejects upstream supply noise. The LT1461 family targets micropower systems that require tight initial accuracy without the quiescent-current penalty of larger references. Key specifications include a maximum temperature coefficient of 20 ppm/°C, 0.15% maximum initial accuracy, 50 µA maximum supply current, and 50 mA minimum source current with low dropout operation. The series reference architecture supports output drive and sink capability, and the 8-pin SOIC-8 package provides a familiar footprint that simplifies PCB layout. The shutdown pin (pin 3) reduces quiescent current to <10 µA when pulled low, enabling power-sequenced systems to disable the reference. The internal band-gap core combined with curvature compensation and laser-trimmed thin-film resistors yields a temperature coefficient that is held to 20 ppm/°C maximum over the full -40 °C to +125 °C operating range. The low 35 µA typical quiescent current extends battery life in portable instruments, while the 50 mA output drive allows the reference to power multiple ADC/DAC channels or precision analog blocks directly without buffering. Typical applications include precision data-acquisition system references, 16-bit and 18-bit ADC/DAC voltage rails, industrial process-control transmitters, battery-powered handheld test equipment, and medical instrumentation front-ends. Designers use the LT1461DHS8-5 when a 5 V reference must be derived from a higher system rail such as 12 V or 15 V with high PSRR to upstream noise. Designers should place a 0.1 µF bypass capacitor close to the input and a 1 µF to 10 µF low-ESR capacitor on the output to maintain stability and minimize load-transient response. The shutdown pin must be tied to VIN or left floating for normal operation; leaving it grounded disables the reference. This page synthesizes distributor pricing, drop-in same-package alternatives, and practical design notes not found in a single manufacturer datasheet, providing an at-a-glance comparison to help engineers select between the LT1461DHS8-5 and competing 5 V references.
LT1511CS8#PBF - 3A Multi-Chemistry Battery Charger | Analog Devices
The LT1511CS8#PBF is a constant-current/constant-voltage (CC/CV) PWM battery charger IC from Analog Devices (formerly Linear Technology), designed to charge multi-chemistry batteries including Li-Ion, NiCd, NiMH, and Lead-Acid. It delivers up to 3A charge current with input current limiting, making it suitable for a wide range of portable and industrial charging applications. The device operates from input voltages up to 25V (28V absolute maximum per Newark) and supports battery charge voltages up to 20V, accommodating 1-3 series cells. It is available in an 8-pin SOIC package (CS8), which is a compact surface-mount option for space-constrained designs. A battery charger IC is a specialized power management integrated circuit that controls the charging process of rechargeable batteries, ensuring safety and longevity by regulating charge current and voltage. The LT1511 belongs to the family of switch-mode battery chargers, which use a PWM (pulse-width modulation) topology to efficiently convert input power to the battery. This places it within the broader hierarchy of power management ICs, specifically under battery management and charging solutions. Unlike linear chargers, switch-mode chargers like the LT1511 offer higher efficiency, especially when the input voltage is significantly higher than the battery voltage, reducing heat dissipation and enabling faster charging. Key features of the LT1511CS8#PBF include its constant-current/constant-voltage charging algorithm, which is essential for Li-Ion batteries that require a controlled current phase followed by a constant voltage phase. The input current limiting feature allows the charger to draw a maximum current from the input supply, preventing overloading of wall adapters or USB ports. The device also includes a sense resistor for accurate current sensing and a programmable charge current via an external resistor. The 8-pin SOIC package provides a small footprint, and the device operates over a commercial temperature range of 0°C to 70°C. Technically, the LT1511 uses a current-mode PWM architecture, which provides excellent line and load regulation. The switching frequency is internally set, and the device includes a shutdown pin for power management. The charger can be configured for different battery chemistries by adjusting the external components, such as the sense resistor and voltage divider. The input current limiting is particularly useful in applications where the input source has a limited current capability, such as a USB port or a solar panel. Typical applications include portable devices, power tools, medical equipment, and industrial battery backup systems. The LT1511 is also suitable for charging lead-acid batteries in automotive and UPS applications, where its robust input voltage range and current limiting are advantageous. When designing with this device, it is important to select the appropriate sense resistor and inductor for the desired charge current and switching frequency, and to ensure proper thermal management, as the power dissipation in the IC can be significant at high charge currents.
LT1511CS8#TRPBF - 3A Battery Charger IC | Analog Devices
The LT1511CS8#TRPBF is a constant-current/constant-voltage battery charger IC from Analog Devices, designed for multi-chemistry battery charging applications. It delivers up to 3A of charge current with input current limiting, making it suitable for a wide range of portable and industrial devices. The device operates from a 4.5V to 30V input voltage range and features a programmable charge current, making it flexible for various battery configurations. A battery charger IC is a specialized power management integrated circuit that controls the charging of rechargeable batteries, ensuring safe and efficient charging by regulating voltage and current. The LT1511CS8#TRPBF belongs to the category of linear battery chargers, which are part of the broader power management IC family. These devices are essential in applications where battery life and safety are critical, such as in portable electronics, medical devices, and industrial equipment. Key features of the LT1511CS8#TRPBF include a 3A maximum charge current, constant-current/constant-voltage charging algorithm, and input current limiting. The device also includes a precision reference for accurate voltage regulation and a low-dropout design that maximizes charging efficiency. The SOIC-8 package provides a compact footprint, ideal for space-constrained designs. The LT1511CS8#TRPBF uses a linear charging topology, which offers simplicity and low noise compared to switching chargers. It includes thermal regulation to prevent overheating, and its input current limiting feature allows operation from limited-power sources such as USB ports. The device is designed for reliable operation over a wide temperature range, making it suitable for demanding environments. Typical applications include portable devices, battery-powered tools, and industrial battery charging systems. The LT1511CS8#TRPBF is particularly well-suited for applications requiring a simple, cost-effective charging solution with high reliability. When designing with this device, ensure proper thermal management by providing adequate PCB copper area for heat dissipation, especially at high charge currents. The input current limiting feature should be configured to match the capabilities of the power source to avoid overloading.