Litar Bersepadu

Subkategori

📁 ADC/DAC 3,100+ produk 📁 IC Penguat 1,700+ produk 📁 Kodek Audio 18 produk 📁 IC Audio 2 produk 📁 Jam & Pemasa 640+ produk 📁 Comparator ICs 1 produk 📁 DSP 1,100+ produk 📁 IC Perolehan Data 2 produk 📁 Potensiometer Digital 4 produk 📁 Pemacu & Pengawal Paparan 1 produk 📁 FPGA & CPLD 7,100+ produk 📁 IC Antara Muka 3,100+ produk 📁 Pemacu LED 1 produk 📁 IC Logik 450+ produk 📁 IC Memori 870+ produk 📁 Mikropengawal 20,000+ produk 📁 Mikropemproses 4 produk 📁 Pemacu Motor 1 produk 📁 Lain-lain 1 produk 📁 Antara Muka Penderia dan Pengesan 1 produk 📁 IC Khusus 15 produk 📁 IC Video 13 produk

Produk (38,000+)

XC5VLX50-1FF324I - 46,080-Cell Virtex-5 LX FPGA | AMD
XC5VLX50-1FF324I

XC5VLX50-1FF324I - 46,080-Cell Virtex-5 LX FPGA | AMD

The AMD XC5VLX50-1FF324I is a Virtex-5 LX field-programmable gate array with 46,080 logic cells, 220 I/O, and a 1 V supply, housed in a 324-pin FCBGA package. The device combines programmable logic, block RAM, and dedicated I/O resources in a single surface-mount semiconductor for high-performance digital systems. Its industrial-temperature designation supports design use across the extended industrial temperature range. A field-programmable gate array, or FPGA, is a reconfigurable digital integrated circuit whose logic and interconnect paths are configured after fabrication. FPGAs occupy the programmable-logic segment of the semiconductor hierarchy and are selected when designers need hardware parallelism, high-speed interfaces, adaptable signal processing, or field upgrades without changing the printed circuit board. The Virtex-5 LX family uses the second-generation ASMBL column-based architecture described in the manufacturer documentation. The XC5VLX50-1FF324I provides 46,080 logic cells for implementing parallel datapaths, control logic, protocol interfaces, and digital signal-processing functions. Its 220 I/O provide board-level connections for external memory, clocks, data buses, and control signals. The 1 V core supply supports low-voltage, high-performance operation, while the industrial-grade suffix identifies the intended temperature qualification for demanding industrial equipment. Virtex-5 LX resources include configurable logic blocks, block RAM, dedicated input/output resources, and programmable interconnect. These resources allow one device to implement multiple fixed-function blocks in parallel. The architecture is appropriate when throughput, deterministic latency, flexible I/O standards, or post-deployment reconfiguration matter more than the simplicity and unit cost of a small microcontroller or discrete logic implementation. Typical uses include industrial control and automation, communications infrastructure, test and measurement equipment, signal-processing subsystems, and embedded video or imaging controllers. A designer can place data converters, high-speed serial links, memory interfaces, and control logic in one FPGA while preserving a field-updatable hardware platform. The large 324-ball package also provides the routing capacity needed for wide buses and numerous external connections. Board design should follow the official Virtex-5 package pinout file and device-specific pin constraints rather than assigning FPGA balls by general BGA convention. Decoupling, power-plane segmentation, clock integrity, configuration access, and high-speed I/O implementation require close attention because incorrect ball assignments or return-path discontinuities can prevent reliable operation despite a correct logic design. This product page consolidates the confirmed device identity, package details, verified sourcing context, same-family drop-in candidates, and practical design considerations into an engineering-focused reference. Use the manufacturer package files and datasheet as the controlling documents for pin assignment, configuration, electrical limits, and PCB implementation.

RFC Hubungi kami
XC5VLX50-1FF676C - Virtex-5 LX 676-FCBGA FPGA | AMD
XC5VLX50-1FF676C

XC5VLX50-1FF676C - Virtex-5 LX 676-FCBGA FPGA | AMD

The AMD XC5VLX50-1FF676C is a Virtex-5 LX field-programmable gate array with 46,080 logic cells, 440 I/O, and a 676-ball FCBGA package. It uses a 65 nm CMOS process and is identified with a -1 speed grade. The device combines programmable logic, dedicated FPGA resources, and 440 user I/O in a single square surface-mount package. A field-programmable gate array, or FPGA, is a semiconductor whose digital functionality is configured after manufacture. The FPGA category sits within programmable logic devices and broad semiconductor systems, replacing many fixed-function gate arrays with configurable logic, interconnections, memory resources, and I/O. Virtex-5 LX devices are positioned as general-purpose programmable-logic platforms for embedded control, communications, signal processing, and high-performance embedded systems. Three headline attributes define the XC5VLX50-1FF676C: 46,080 logic cells provide the programmable fabric, 440 I/O support connections to external circuits, and the 676-FCBGA package provides a dense ball-grid interface. Its -1 ordering suffix identifies the speed grade, while the final C suffix identifies the commercial ordering variant. The listed package uses a square BGA body and ball terminals. The device belongs to the Virtex-5 LX platform and uses AMD's second-generation ASMBL column-based FPGA architecture. This architecture organizes the programmable device into columns and interconnects configurable logic and dedicated resources. The device is fabricated using 65 nm CMOS technology, with a listed operating voltage of 1 V. Exact clock, resource, memory, differential-I/O, and performance limits should be selected from the manufacturer datasheet for the complete device configuration. Typical uses include network-interface control, industrial automation, embedded video and communications, test equipment, and custom signal-processing systems. Its 440 I/O are useful for designs that require substantial external connectivity, while 46,080 logic cells allow substantial parallel datapaths and control logic to be consolidated into one programmable device. The 676-FCBGA package is especially relevant to multilayer PCB designs using fine-pitch BGA routing. PCB design must provide all 676 power, ground, configuration, clock, and signal BGA connections defined by the package pinout. The Virtex-5 package files should be used directly during symbol creation, escape routing, power-plane planning, and footprint verification. Because this is a complex BGA package, via-in-pad or through-via escape strategy, thermal design, and board-level power integrity strongly affect reliable operation. This page organizes the verified device identity, package characteristics, technical alternatives, comparison criteria, and practical implementation guidance into one engineering-focused resource. Use the manufacturer datasheet and package pinout files as the controlling documents for configuration, pin assignments, power sequencing, and guaranteed operating limits.

RFC Hubungi kami
XC68HC912D60CFU8-FR - 16-Bit 60KB Flash MCU | NXP
XC68HC912D60CFU8-FR

XC68HC912D60CFU8-FR - 16-Bit 60KB Flash MCU | NXP

The NXP XC68HC912D60CFU8-FR is a 16-bit M68HC12 embedded microcontroller with 60 KB of flash memory, CPU12 processing, and connectivity described as CANbus, MI Bus, SCI, and SPI. The device is supplied in an 80-pin QFP package, with the verified ordering information identifying the XC68HC912D60CFU8 variant and the -FR ordering suffix. Its 60 KB flash figure identifies it as a program-memory-oriented MCU for embedded control systems requiring deterministic peripheral access and embedded software integration. An MCU is a semiconductor device that combines a processor core, program memory, data memory, peripherals, and communication interfaces on one integrated circuit. The M68HC12 family belongs to the embedded-microcontroller hierarchy, where a CPU executes firmware, reads inputs, controls outputs, and manages communication links. The XC68HC912D60CFU8-FR is positioned for industrial and embedded applications where CANbus, serial, SPI, or related interfaces are useful system building blocks. The verified product information identifies the MCU as using a 16-bit CPU12 core, 60 KB flash, 80-QFP packaging, and connectivity including CANbus, MI Bus, SCI, and SPI. The available search data does not provide verified RAM size, maximum CPU frequency, supply voltage, ADC specifications, timer details, operating-temperature grade, or absolute pin-level timing values for this exact suffix, so those parameters remain unspecified rather than inferred. The NXP datasheet search result also identifies related XC68HC912D60 package and temperature-grade orderings, which should be used as a basis for checking the final ordering code. Typical design roles include embedded motor and industrial controllers, CAN-connected equipment, serial-device control, SPI peripheral coordination, and compact control platforms requiring a 16-bit MCU architecture. The -FR suffix is an ordering designation associated with the supplied part number; package, temperature, and lead-finish details should be confirmed against the manufacturer ordering information before production release. Designers should preserve the exact 80-pin QFP footprint and verify pin multiplexing, power, ground, clock, debug, and communication assignments from the datasheet before layout release. Review the required CANbus, SCI, SPI, and MI Bus transceiver or peripheral connections, and confirm that the selected firmware, development tools, and memory map match the exact device variant. This page consolidates verified distributor and manufacturer-linked search data, the available datasheet references, ordering information, and engineering-selection guidance for engineers evaluating XC68HC912D60CFU8-FR.

RFC Hubungi kami
XC6SLX100-2CSG484C - 101K Logic FPGA | AMD
XC6SLX100-2CSG484C

XC6SLX100-2CSG484C - 101K Logic FPGA | AMD

The AMD XC6SLX100-2CSG484C is a Spartan-6 LX family Field Programmable Gate Array (FPGA) with 101,261 logic cells, 338 user I/Os, and 4,939,776 RAM bits. The device is housed in a lead-free 484-CSPBGA (19x19 mm, 0.80 mm pitch) surface-mount package and operates from a 1.14V to 1.26V core supply. This configuration delivers a compact, high-density programmable logic solution for commercial-temperature (0C to 85C) systems. What is an FPGA? A Field Programmable Gate Array is an integrated circuit whose logic fabric can be configured after manufacturing to implement arbitrary digital functions. FPGAs sit above CPLDs in capacity and are often used for parallel processing, protocol bridging, and hardware acceleration. In a system hierarchy, the Spartan-6 LX family belongs to programmable logic devices, a subset of integrated circuits, and is widely used in communications, industrial automation, and video processing. Key features of XC6SLX100-2CSG484C include 7,911 CLBs, an internal frequency up to 667 MHz, 338 user configurable I/O pins, and 4,939,776 total block RAM bits. The -2 speed grade balances performance and power for cost-sensitive designs. The 484-ball CSPBGA package provides a 19x19 mm footprint with 0.80 mm pitch, making it suitable for space-constrained PCBs. Beneath the package, the Spartan-6 LX100 uses a 45nm CMOS process technology. This process enables high logic density and low static power, with core voltage around 1.2V. The FPGA includes dedicated clock management tile, DSP slices, and block RAM resources that can be used to build efficient digital signal processing pipelines, soft processors, and high-speed I/O interfaces. Typical applications include industrial automation controllers, telecom line cards, video and image processing, software-defined radio, and ASIC prototyping. The 338 I/O pins and abundant logic cells allow integration of multiple peripheral interfaces and custom processing engines on one device. When paired with DDR3 memory such as MT41K256M16HA-125:E or IS43TR16256AL-125KBL, the FPGA can implement high-bandwidth data buffers and packet processing. When designing with this component, plan the power delivery network carefully for the 1.14V to 1.26V core rail and respect the 0C to 85C junction temperature range. Decouple each supply pin and verify configuration memory selection before layout.

RFC Hubungi kami
XC6SLX100-2FG484C - 101K-Logic Cell Spartan-6 FPGA | AMD
XC6SLX100-2FG484C

XC6SLX100-2FG484C - 101K-Logic Cell Spartan-6 FPGA | AMD

The AMD XC6SLX100-2FG484C is a Spartan-6 LX field-programmable gate array with 101,261 logic cells, 326 user I/O, and a 484-ball BGA package. It operates as a configurable parallel-processing semiconductor, combining programmable logic, block RAM, and digital clocking resources in one device. The package is identified by the verified distributor data as a 484-BBGA, and the Spartan-6 LX family is associated with 45 nm CMOS technology. A field-programmable gate array is a digital semiconductor whose logic, memory, and interconnect functions are configured after manufacture. An FPGA belongs to the programmable-logic hierarchy, which includes CPLDs, FPGA and CPLD devices, programmable-logic ICs, and semiconductors. Compared with a fixed-function application-specific integrated circuit, an FPGA allows parallel algorithms, interface protocols, timing, and control logic to be revised without changing the printed circuit board. The XC6SLX100-2FG484C provides 101,261 logic cells and 326 I/O in its 484-ball package. Verified family information reports an internal frequency of 667 MHz for the related 484-ball Spartan-6 LX ordering information. The -2 suffix identifies the device speed grade, while the FG484C portion identifies the package and commercial-temperature ordering code. These identifiers must be preserved when replacing the device because FPGA package pinouts, speed grades, and temperature ratings are not interchangeable by assumption. Its 101,261-cell capacity makes the device suitable for designs combining multiple parallel processing lanes rather than simple control functions. Available Spartan-6 LX resources can support high-throughput digital filtering, protocol bridging, embedded control, video-processing pipelines, and data acquisition when the design is implemented within the device's resource and speed limits. The 326 I/O count also provides substantial board-level connectivity, reducing the need for external interface components in systems that can use the available pins according to the AMD package pinout files. Typical applications include industrial automation, test and measurement equipment, communications interfaces, embedded video, robotics, and general-purpose instrumentation. Because the device is an FPGA rather than a microprocessor, firmware is not executed from a boot flash device. Instead, a bitstream defines the logic configuration and must be loaded into the FPGA according to the device's configuration architecture. Configuration storage, startup behavior, clocking, and JTAG access therefore remain important system-level design considerations. For reliable implementation, follow AMD's package pinout files and configuration guidance for the exact 484-ball land pattern. The board must also provide suitable decoupling, stable clocking, correct configuration startup behavior, and adequate power delivery. Although the verified listing identifies a 484-BBGA package, pin names and the complete 484-ball assignment are not included in the supplied data, so this page does not reproduce or infer them. This page combines verified distributor identification, price and availability references, package details, same-family drop-in candidates, and practical selection guidance. It also separates confirmed facts from parameters that require confirmation in the AMD Spartan-6 LX datasheet and official package files, helping engineers avoid unsupported substitutions.

RFC Hubungi kami
XC6SLX100-2FG484I - Spartan-6 FPGA, 101261 Cells, 484-BBGA | AMD
XC6SLX100-2FG484I

XC6SLX100-2FG484I - Spartan-6 FPGA, 101261 Cells, 484-BBGA | AMD

The AMD XC6SLX100-2FG484I is a Spartan-6 LX field-programmable gate array with 101,261 logic cells, a 667 MHz internal frequency, and a 484-pin CSBGA package measuring 19 mm by 19 mm at 0.80 mm pitch. It uses 45 nm FPGA technology and a 1.2 V core supply, combining programmable logic, block RAM, digital signal processing resources, and programmable I/O in one high-density device. The -2 suffix identifies the Spartan-6 LX performance grade, while the I suffix identifies the industrial 0 to 85 °C temperature range. A field-programmable gate array is a semiconductor whose digital logic is configured after fabrication. FPGAs occupy the programmable-logic hierarchy alongside complex programmable logic devices and programmable system-on-chip devices. Unlike a fixed-function application-specific integrated circuit, an FPGA can implement parallel processing, control, interface, and signal-processing functions that are revised through programmable configuration rather than redesigning the integrated circuit. This makes the Spartan-6 LX family useful where architecture flexibility, deterministic parallel execution, or long product customization is important. The XC6SLX100-2FG484I provides 101,261 logic cells, 667 MHz internal frequency, and 484 package pins. Its 45 nm Spartan-6 LX implementation supports high-density designs using configurable logic and dedicated fixed-function blocks. The large I/O count accommodates interfaces to external memory, communications transceivers, converters, displays, sensors, and test equipment. The industrial temperature rating supports equipment intended for controlled industrial environments, although system designers must still manage junction temperature and board-level heat dissipation. The -2 speed grade is distinct from the -3 and -3N grades in the Spartan-6 LX family. The -3 grade offers the highest family performance, while the -2 grade provides a different balance of timing performance and system implementation considerations. The 484-pin CSBGA package requires careful PCB escape routing, power-plane design, via-in-pad or via-adjacent decoupling, and assembly-process control. AMD Spartan-6 package pinout resources should be used directly when assigning every power, ground, configuration, and user I/O connection. Typical applications include industrial control and automation, industrial Ethernet and serial networking, video and image processing, instrumentation, communications infrastructure, and embedded control systems. In each case, parallel programmable logic can implement parallel data paths, state machines, protocol handling, or custom accelerators. Configuration storage, clocking, power sequencing, and downloadable logic also make the device suitable for equipment requiring field updates after deployment. The primary design trade-off is package complexity. A 484-pin 19 mm CSBGA provides substantial connectivity but demands fine-pitch assembly, controlled impedance routing, and careful power and thermal planning. Before layout release, verify pin assignments against the AMD package pinout file, validate every power rail against the device requirements, and complete timing and thermal analysis for the intended clock and I/O conditions. This page combines exact device specifications, pin-compatible family alternatives, parameter comparisons, and practical PCB and design guidance. It is intended to accelerate component selection while preserving the engineering checks required for a complex programmable-logic device.

RFC Hubungi kami
XC6SLX100-2FG676C - Spartan-6 LX FPGA, 667 MHz | AMD
XC6SLX100-2FG676C

XC6SLX100-2FG676C - Spartan-6 LX FPGA, 667 MHz | AMD

AMD XC6SLX100-2FG676C is a Spartan-6 LX field-programmable gate array with a 667 MHz internal frequency, supplied in a 676-BGA package. The device is built on 45 nm FPGA technology and uses the -2 performance grade for mid-speed programmable-logic designs. Its commercial operating-temperature range is 0°C to 85°C, while the lead-free package is specified as a 19 mm × 19 mm CSBGA construction with a 0.80 mm pitch. These characteristics position the FPGA for embedded control, interface bridging, signal processing, and industrial automation systems requiring configurable parallel logic and substantial general-purpose I/O. A field-programmable gate array is a semiconductor whose logic fabric, interconnect, and configurable I/O blocks can be programmed after manufacture. An FPGA belongs to the programmable-logic hierarchy, combining parallel programmable logic, block RAM, dedicated processing resources, dedicated I/O resources, and programmable serial transceivers where applicable. This differs from a fixed-function application-specific integrated circuit because the board designer can adapt the implemented logic and interface behavior without changing the physical device. The Spartan-6 LX family is positioned for designs requiring more integration than small programmable logic devices while retaining a comparatively accessible FPGA architecture. The 667 MHz internal-frequency figure establishes the device's performance class, although actual interface throughput also depends on the selected I/O standards, clocking topology, routing, and implemented logic. The -2 speed suffix identifies the performance grade, and the trailing package and temperature identifiers distinguish the exact ordering configuration from other Spartan-6 LX members. Designs using this device must account for its BGA assembly, ball assignment, power architecture, configuration method, and high-speed routing requirements. Configuration data must be loaded correctly before the FPGA begins its user-defined logic operation. Board planners should preserve the manufacturer's recommended power, decoupling, clock, and package-construction guidance, especially around banks operating at different voltage domains. Signal integrity is also important because the fine 0.80 mm package pitch constrains escape routing and demands careful PCB stack-up and return-path planning. Typical uses include industrial automation controllers, network-interface bridging, data-acquisition equipment, embedded video and control systems, communications infrastructure, and test equipment. The Spartan-6 LX fabric is particularly useful when several fixed interfaces must be consolidated into one programmable device while preserving parallel I/O flexibility. In these systems, the FPGA can implement protocol conversion, buffering, timing control, data formatting, and supervisory logic around external transceivers or processors. The principal design trade-off is that an FPGA adds configuration, toolchain, pin-planning, and thermal-management requirements compared with an ASIC or fixed microcontroller. Designers should choose this part when programmable logic, flexible I/O, and field-update capability justify that complexity. If only a small control algorithm is required, a microcontroller may be simpler; if fixed high-volume functionality is required, an ASIC may ultimately be more economical. This product record consolidates the available package, speed, process, temperature, and sourcing information, then adds application guidance, pinout-status disclosure, verified comparison fields, and practical design notes. It is intended to help engineers screen the exact ordering code before reviewing the manufacturer Spartan-6 documentation and completing board-level validation.

RFC Hubungi kami
XC6SLX100-2FG676I - 101261-Cell Spartan-6 LX FPGA | AMD
XC6SLX100-2FG676I

XC6SLX100-2FG676I - 101261-Cell Spartan-6 LX FPGA | AMD

The AMD XC6SLX100-2FG676I is a Spartan-6 LX field-programmable gate array with 101261 logic cells, 480 I/O, a -2 speed grade, and a 676-ball BGA package. It is manufactured using 45 nm CMOS technology and operates from a 1.2 V core supply. The industrial-temperature suffix I supports an operating range of -40 °C to 100 °C junction temperature. This combination of substantial programmable logic, 480 I/O, and a large pin-count package makes the device suitable for embedded systems requiring parallel interfaces, programmable signal processing, and extensive interconnection. A field-programmable gate array is a programmable logic semiconductor in which digital functions are implemented through configurable lookup tables, routing resources, block RAM, and dedicated input/output blocks. Within the device hierarchy, an FPGA belongs to programmable logic devices and sits above general-purpose fixed-function processors when designers need parallel hardware execution, adaptable interfaces, or rapid hardware revisions. The Spartan-6 LX family combines these FPGA resources with a 45 nm process optimized for cost-sensitive embedded and industrial designs. Key features of the XC6SLX100-2FG676I include 101261 logic cells, 480 user I/O, a stated internal frequency of 667 MHz, and 45 nm CMOS construction. The 676-BGA package provides a high pin count and supports designs requiring numerous board connections. The -2 speed grade positions this part below the -3 grade in the Spartan-6 LX ordering hierarchy, while the I suffix identifies the industrial-temperature option. Its large logic-cell count allows multiple processors, control blocks, communication interfaces, and data-processing pipelines to be consolidated into one device. The device belongs to the Spartan-6 LX FPGA family, which targets bridging, industrial automation, embedded control, networking, video processing, and general-purpose programmable logic. Its architecture combines programmable logic, dedicated hard blocks, and abundant I/O in a single package. Compared with smaller members of the Spartan-6 LX family, the XC6SLX100 configuration provides greater logic density and more I/O, allowing a design to connect external memory, high-speed interfaces, sensors, converters, and display or communications peripherals without distributing the system across multiple programmable devices. Typical applications include industrial control gateways, data-acquisition systems, network-interface bridges, embedded video processors, and test equipment. The 480 I/O count is useful for parallel sensor interfaces, memory buses, capture logic, and legacy peripheral connections, while the programmable architecture allows protocol updates without changing the PCB. For automotive, industrial, and communications equipment, the I temperature designation is the relevant selection factor when the design must operate across an extended temperature range. When planning the PCB, treat the 676-ball BGA as a high-density, fine-pitch assembly and follow the package ball map and recommended escape-routing guidance in the AMD/Xilinx package documentation. Power, ground, decoupling, configuration, clocking, and I/O planning should be completed before layout because changes to BGA escape routing can affect signal integrity and manufacturability. The -2 speed grade also needs to be considered during timing closure rather than relying only on the stated internal frequency. This product page consolidates the exact device identity, package and logic resources, drop-in family alternatives, application guidance, and design cautions engineers need when evaluating the XC6SLX100-2FG676I for a new programmable-logic design. It also distinguishes the important speed-grade and temperature-grade changes that determine whether an otherwise pin-compatible Spartan-6 LX option is suitable for the intended product environment.

RFC Hubungi kami
XC6SLX100-2FGG676C - 101K LEs Spartan-6 LX FPGA | AMD Xilinx
XC6SLX100-2FGG676C

XC6SLX100-2FGG676C - 101K LEs Spartan-6 LX FPGA | AMD Xilinx

The AMD Xilinx XC6SLX100-2FGG676C is a Spartan-6 LX family Field Programmable Gate Array (FPGA) with 101,261 logic cells, 4,939,776 system gates, and 480 I/O pins, housed in a 676-ball Fine-Pitch Ball Grid Array (FBGA-676) package with 0.8 mm ball pitch and a 19×19 mm body. The -2 speed grade targets mid-range performance and is fabricated on a 45 nm CMOS process with a 1.2 V core supply; commercial temperature grade (C suffix) supports 0 °C to +85 °C operation. What is an FPGA? An FPGA (Field Programmable Gate Array) is a semiconductor device whose logic fabric, interconnect, and I/O can be reconfigured by the designer after PCB assembly. The Spartan-6 LX position in the broader hierarchy is: programmable logic -> FPGA -> low-power FPGA family. Compared with ASICs, FPGAs trade raw unit cost for design flexibility, in-system reprogrammability, and rapid prototyping, and they sit in the same tier as CPLDs and complex PLDs for glue-logic and parallel DSP workloads. Key features include 3.8 Mb of block RAM, 180 DSP48A1 slices, integrated Memory Controller Blocks (MCBs), and up to 108 Mb of embedded memory. The device supports common interfaces such as DDR, DDR2, DDR3, LVDS, LVCMOS, and PCI Express endpoint via the integrated GTP transceiver infrastructure in compatible LXT variants. The XC6SLX100 offers a balanced cost/performance ratio ideal for high-volume, cost-sensitive designs requiring substantial logic density. The LX architecture uses a 6-input LUT fabric with dedicated carry logic, distributed RAM and shift-register resources, and a multi-clock tiles structure. The internal core can run up to approximately 667 MHz depending on speed grade, and high-speed SelectIO technology provides flexible I/O support for single-ended and differential standards at data rates into the hundreds of Mbps range. Typical applications include industrial motor control, LED video walls and digital signage, surveillance IP cameras, automotive driver assistance (non-safety-critical domains), consumer video processing, and small-cell baseband processing. The Spartan-6 LX family is widely used as a bridge between CPLD and higher-density Virtex-class FPGAs. When designing with this device, plan for a 1.2 V core rail and a 2.5 V/3.3 V auxiliary supply, with I/O voltages per bank. Use Xilinx ISE Design Suite (or Vivado with legacy project import) for bitstream generation; the FBGA-676 footprint demands careful PCB stack-up and via-in-pad escape routing. This page synthesizes distributor pricing, drop-in alternatives within the Spartan-6 and competing Cyclone IV families, and practical PCB design guidance not found in a single source datasheet.

RFC Hubungi kami
XC6SLX100-3FG484C - 101,261-Cell Spartan-6 LX FPGA | AMD
XC6SLX100-3FG484C

XC6SLX100-3FG484C - 101,261-Cell Spartan-6 LX FPGA | AMD

AMD XC6SLX100-3FG484C is a Spartan-6 LX field-programmable gate array with 101,261 logic cells, 4,939,776 RAM bits, 326 I/O, and 667 MHz internal frequency, housed in a 484-pin CSBGA package. The device uses 45 nm CMOS technology and supports a 1.2 V supply, making it suitable for configurable control, signal-processing, communications, and embedded-system designs that require substantially more logic than a small microcontroller provides. A field-programmable gate array is a semiconductor whose digital logic, interconnect, and other configurable resources are programmed after manufacture. An FPGA belongs to the programmable-logic hierarchy above fixed-function logic ICs and microcontrollers. Its parallel hardware resources can execute multiple control, arithmetic, filtering, and interface tasks concurrently. This makes the Spartan-6 LX family appropriate when deterministic operation, flexible logic capacity, custom peripherals, and board-level configuration are more important than the simplicity of a fixed controller. The XC6SLX100-3FG484C combines 101,261 logic cells with 4,939,776 bits of block RAM and 326 user I/O. Its -3 designation identifies the highest-performance speed grade in the Spartan-6 LX family. The 667 MHz internal frequency provides a timing reference for the programmable fabric, while the large logic population supports parallel datapaths, high-speed state machines, protocol bridges, image-processing pipelines, and multi-channel interface aggregation. The Spartan-6 LX architecture supports programmable logic, dedicated block RAM, dedicated digital signal processing resources, clock-management functions, and general-purpose I/O. These resources allow a complete subsystem to be consolidated in one device instead of being divided among a processor, external memory, programmable logic, and multiple interface controllers. The 45 nm CMOS process and 484-pin surface-mount package support compact industrial, communications, instrumentation, and embedded-control equipment. Typical uses include industrial control and data acquisition, video and image processing, communications infrastructure, networking equipment, test and measurement systems, and embedded signal-processing platforms. The 326 I/O are especially useful when a design must connect directly to multiple converters, memories, transceivers, clocks, and control signals. Designers should still verify each selected bank voltage, I/O standard, differential interface, clock topology, and pin placement against the AMD package pinout files. The principal design trade-off is routing and timing complexity. Although the -3 grade offers the highest Spartan-6 LX performance, reaching a closed timing design at that grade can require more careful constraints, placement, and logic partitioning than a lower speed grade. Use the AMD package pinout files and the Spartan-6 synthesis, implementation, timing, and programming guidance before assigning power rails or routing board-level interfaces. This page combines the device architecture and package facts with a practical replacement comparison, design guidance, and sourcing-focused guidance. It highlights which same-package Spartan-6 LX variants preserve pin compatibility, where speed or temperature differences matter, and how to select a drop-in alternative without overlooking the qualification requirements of the original design.

RFC Hubungi kami
XC6SLX100-3FG484I - 667 MHz Spartan-6 LX FPGA | AMD
XC6SLX100-3FG484I

XC6SLX100-3FG484I - 667 MHz Spartan-6 LX FPGA | AMD

AMD XC6SLX100-3FG484I is a Spartan-6 LX field-programmable gate array with a 667 MHz internal frequency, supplied in a 484-pin CSBGA package measuring 19 mm by 19 mm with a 0.80 mm ball pitch. It is designed for industrial logic, embedded processing, communications, and control systems where configurable parallel logic and programmable peripherals must operate within an industrial temperature range. A field-programmable gate array is a semiconductor whose digital logic, interconnect, and selected I/O resources are configured after manufacture. Within the product hierarchy, the XC6SLX100 belongs to the Spartan-6 LX FPGA family, combines programmable logic with configurable I/O, and occupies the position between fixed-function logic devices and larger soft processors or ASICs. This flexibility permits one board design to support multiple interfaces and can shorten development cycles compared with a custom ASIC. The -3 speed designation identifies the high-performance Spartan-6 speed grade, while the industrial suffix denotes operation from 0°C to 85°C. The device has 484 package balls and a lead-free CSBGA package. The product listing also identifies the family as Spartan-6 LX, and the device family documentation identifies -3 as the highest-performance grade among the listed Spartan-6 LX speed options. Spartan-6 LX devices combine programmable logic blocks with selectable I/O standards and dedicated resources for clocking, memory, and communications. Designers can implement parallel data acquisition, industrial interfaces, control logic, protocol bridges, and embedded systems without relying on a separate processor. The 0.80 mm ball pitch requires careful PCB layout, escape routing, and assembly-process control, especially when high-density fanout is required around the device. Typical uses include industrial factory automation, programmable logic controllers, instrument controllers, communication infrastructure, video-processing front ends, and embedded test systems. Its industrial temperature rating supports equipment intended for controlled factory and commercial environments, although thermal design must account for power dissipation beneath the large ball-grid array. For PCB implementation, use the AMD Spartan-6 package pinout files when assigning every power, ground, configuration, clock, and user I/O ball. Follow the package-specific via and solder-mask-land patterns, provide the required configuration circuitry, and complete signal-integrity and power-integrity analysis before fabrication. This page organizes the verified device identity, package details, temperature information, same-family alternatives, comparison parameters, and practical design guidance. It also distinguishes exact ordering-code differences that engineers must verify before reusing an existing FPGA board layout or approving an alternate component.

RFC Hubungi kami
XC6SLX100-3FG676C - 101261-Cell Spartan-6 LX FPGA | AMD
XC6SLX100-3FG676C

XC6SLX100-3FG676C - 101261-Cell Spartan-6 LX FPGA | AMD

The AMD XC6SLX100-3FG676C is a Spartan-6 LX field-programmable gate array with 101261 logic cells, 480 I/O, a 4.71 Mbit internal memory capacity, and a 676-ball BGA package. It operates from a 1.2 V core supply and is specified for a 0°C to 85°C commercial temperature range. The device uses 45 nm CMOS technology and is intended for programmable-logic designs requiring substantial parallel processing, embedded memory, and a high pin count. A field-programmable gate array is a programmable logic device in which configurable logic blocks, block RAM, programmable input/output resources, and dedicated clocking resources implement digital systems. Within the semiconductor hierarchy, an FPGA belongs to programmable logic devices, sits above simple fixed-function logic, and supports configuration-based adaptation of interfaces, control systems, signal processing, and embedded systems. The Spartan-6 LX family combines a large logic-cell count with block memory and high-speed I/O in a surface-mount BGA package. Key features of the XC6SLX100-3FG676C include 15822 application logic elements, 101261 register and LUT resources identified for this family member, 4.71 Mbit of internal memory, and 480 user I/O. Its -3 speed designation represents the highest-performance speed grade identified for the Spartan-6 LX family. The commercial suffix C corresponds to the stated 0°C to 85°C operating range, while the 676-ball package supports dense board-level interconnect without using perimeter leads. The FPGA is fabricated using 45 nm CMOS technology and operates with a 1.2 V core voltage. This process generation supports configurable logic, dedicated block RAM, digital clock management resources, programmable I/O standards, and external memory interfaces. Because FPGA pin multiplexing is design dependent, engineers must confirm each selected I/O standard, voltage bank, clock-capable pin, and configuration pin against the package pinout before finalizing the PCB layout. Typical uses include industrial automation, industrial networking, embedded control, test and measurement equipment, video processing, high-speed data acquisition, and communications infrastructure. The 480 available I/O positions make the device suitable for parallel sensor interfaces, multiple external memory devices, high-speed transceiver connections, and control systems combining logic with sizable on-chip buffering. PCB implementation should allocate a continuous ground-reference structure, controlled-decoupling power distribution, and unobstructed access to the device's configuration interface. Validate high-speed I/O return paths and length matching against the selected external memory and transceiver requirements. BGA assembly also requires an appropriate stencil, solder-paste process, and inspection plan because package interconnects cannot be visually inspected after reflow. This product record combines exact orderable-part characteristics, same-footprint Spartan-6 LX alternatives, parameter comparisons, and practical implementation guidance. It helps engineers separate electrical and temperature-grade choices from package or ordering-suffix differences before requesting a quote for the exact assembled device.

RFC Hubungi kami
XC6SLX100-3FG676I - 101261-Cell Spartan-6 LX FPGA | AMD
XC6SLX100-3FG676I

XC6SLX100-3FG676I - 101261-Cell Spartan-6 LX FPGA | AMD

AMD XC6SLX100-3FG676I is a Spartan-6 LX field-programmable gate array with 101,261 logic cells, 480 I/O, and a 676-ball BGA package. The device uses 45 nm CMOS fabrication and operates from a nominal 1.2 V core supply. Its -3 speed grade is the highest-performance grade in the Spartan-6 LX family, while the industrial suffix supports extended-temperature deployment. A field-programmable gate array, or FPGA, is a programmable digital logic device that combines configurable logic blocks, programmable interconnect, block RAM, and digital input/output resources. Within the semiconductor hierarchy, an FPGA belongs to programmable-logic ICs and complements fixed-function logic, microcontrollers, and DSP devices. Spartan-6 devices are commonly used where parallel hardware processing, high I/O density, reconfigurable logic, or deterministic control are valuable. Key features include 7,911 adaptive logic modules, 4,939,776 RAM bits, 480 I/O, and 101,261 logic cells according to the manufacturer product listing. The -3 grade identifies the highest-performance Spartan-6 LX speed option. The 676-BGA package provides a 27 mm by 27 mm body with a 1 mm ball pitch, supporting dense PCB routing while requiring careful escape-routing and thermal-design practices. The XC6SLX100 combines a large programmable logic fabric with on-chip memory resources and a large pin count. This combination supports parallel image processing, control-plane aggregation, protocol bridging, test equipment, and embedded communications systems. Programming uses the AMD/Xilinx FPGA configuration flow, allowing logic, memory, and I/O behavior to be updated through a configuration bitstream after manufacturing. Typical uses include industrial vision, high-speed data acquisition, communications infrastructure, instrumentation, embedded processing, and signal-processing subsystems. In each case, the 480-I/O count can reduce external multiplexing, while the large logic-cell and RAM resources permit multiple parallel pipelines. Designers should match external memory interfaces, clocking, and high-speed I/O requirements to the selected Spartan-6 architecture and board constraints. A critical implementation consideration is that the 676-BGA footprint demands multilayer PCB construction, fine-pitch escape routing, and careful power and ground-plane management. Follow AMD's Spartan-6 package pinout files when assigning balls and verify the selected design's pin constraints against the exact device variant. Configuration startup, clocking, decoupling, and signal-integrity requirements must also be reviewed before fabrication. This page organizes the verified device specifications, package details, same-footprint alternatives, comparison parameters, and practical design guidance for engineers evaluating the XC6SLX100-3FG676I. It also provides focused guidance for distinguishing speed-grade, temperature-grade, and device-density options before selecting a drop-in replacement.

RFC Hubungi kami
XC6SLX100-3FGG484C Spartan-6 LX FPGA 101K Cells | AMD Xilinx
XC6SLX100-3FGG484C

XC6SLX100-3FGG484C Spartan-6 LX FPGA 101K Cells | AMD Xilinx

The AMD Xilinx XC6SLX100-3FGG484C is a Spartan-6 LX Field Programmable Gate Array (FPGA) delivering 101,261 logic cells, 4,939,776 system gates, and 326 user I/O in a 484-ball Fine-pitch BGA package with -3 (highest performance) speed grade. An FPGA (Field Programmable Gate Array) is a semiconductor device whose logic function is defined by the customer after manufacture, rather than at the fab. FPGAs sit in the broader hierarchy of programmable logic devices (PLD) -> CPLD -> FPGA -> SoC FPGA, and combine configurable logic blocks (CLBs), programmable routing, dedicated DSP slices, Block RAM, and hardened I/O serializers. Unlike microcontrollers (which execute instructions sequentially), FPGAs perform true parallel datapath operations, making them the preferred choice for high-throughput DSP, packet processing, and custom interface bridging where latency and determinism matter more than raw CPU clock rate. The XC6SLX100-3FGG484C integrates 180 DSP48A1 slices for fixed- and floating-point acceleration, 4,824 Kbits of Block RAM, four clock management tiles (CMTs) with PLL/DLL, and SelectIO technology supporting voltages from 1.2V to 3.3V. The -3 speed grade delivers the highest Fmax in the Spartan-6 LX family, while the 45 nm process node keeps static power in the milliwatt range compared to older 90/65 nm nodes. Typical applications include high-volume consumer and industrial designs such as video processing pipelines, motor control, industrial Ethernet bridges, PCIe endpoint controllers (when paired with an external PHY), and digital signage. Designers also use it for custom packet processors in telecom backhaul equipment and as a flexible I/O expander/glue logic replacement for multiple CPLDs on a single board. When designing with the -3 speed grade, ensure your PCB footprint supports the FGG484 (Pb-free, 1.0 mm pitch, 19 x 19 mm body) BGA land pattern and provide adequate via-in-pad or microvia escape routing. Decoupling must follow the Spartan-6 PCB Design Guide for the VCCINT, VCCAUX, and VCCO rails to meet the -3 timing closure across the full industrial temperature range. This page synthesizes distributor pricing, verified drop-in same-family and cross-brand Spartan-6 equivalents, and practical board-level design guidance that is not consolidated in the manufacturer datasheet itself.

RFC Hubungi kami
XC6SLX100T-2CSG484I - Spartan-6 FPGA 101K Logic Cells | AMD
XC6SLX100T-2CSG484I

XC6SLX100T-2CSG484I - Spartan-6 FPGA 101K Logic Cells | AMD

The AMD XC6SLX100T-2CSG484I is a member of the Spartan-6 LXT FPGA family, built on a mature 45nm low-power copper process technology. It delivers 101,261 logic cells and 296 user I/O pins in a 484-ball CSBGA package, offering a balance of density, performance, and low power for high-volume applications. The device operates from a 1.2V core supply and supports a wide range of I/O standards. An FPGA (Field-Programmable Gate Array) is an integrated circuit that can be configured by the designer after manufacturing, allowing for custom digital logic implementations. FPGAs sit between ASICs and microprocessors in the design hierarchy, providing reconfigurable hardware acceleration for tasks ranging from protocol bridging to digital signal processing. The Spartan-6 family is optimized for cost-sensitive, high-volume applications where low power and system integration are critical. Key features of the XC6SLX100T-2CSG484I include 4,939,776 bits of block RAM, 268 DSP48A1 slices, and support for high-speed serial transceivers (up to 3.125 Gbps) in the LXT variant. The device also includes a hard PCI Express block, memory controllers, and advanced clock management tiles (CMTs) with PLLs and DCMs. These features enable the implementation of complete system-on-chip designs with minimal external components. From a technical perspective, the Spartan-6 family uses a 45nm process that reduces dynamic power consumption by approximately 50% compared to previous Spartan families. The fabric is based on a 6-input look-up table (LUT) architecture, providing efficient logic utilization. The device supports partial reconfiguration, allowing dynamic updates to logic functions without powering down the system. Typical applications include industrial automation, automotive infotainment, medical imaging, and communications equipment. The 296 I/O pins support various standards including LVCMOS, LVDS, and HSTL, making it suitable for interfacing with a wide range of peripherals and memory devices. When designing with this FPGA, careful attention to power supply decoupling and thermal management is essential. The 1.2V core supply should be regulated with low-noise LDOs or switching converters, and the device's power consumption should be estimated using the Xilinx Power Estimator (XPE) tool to ensure adequate cooling.

RFC Hubungi kami
XC6SLX100T-3FGG484C - Spartan-6 FPGA 101K Logic Cells | AMD
XC6SLX100T-3FGG484C

XC6SLX100T-3FGG484C - Spartan-6 FPGA 101K Logic Cells | AMD

The AMD XC6SLX100T-3FGG484C is a member of the Spartan-6 LXT family of Field Programmable Gate Arrays (FPGAs), built on a mature 45 nm low-power copper process technology. It delivers 101,261 logic cells, 296 user I/O pins, and 4,939,776 bits of block RAM, all in a 484-ball FBGA package. This device is designed for high-volume applications requiring leading system integration with the lowest total cost, offering half the power consumption of previous Spartan families and faster, more comprehensive connectivity. An FPGA (Field Programmable Gate Array) is an integrated circuit that can be configured by the customer or designer after manufacturing—hence 'field-programmable'. FPGAs are part of the broader category of programmable logic devices (PLDs), which sit between application-specific integrated circuits (ASICs) and general-purpose processors in the semiconductor hierarchy. They consist of an array of programmable logic blocks, interconnects, and I/O blocks, allowing designers to implement custom digital logic circuits without the high NRE costs of ASIC development. FPGAs are widely used in prototyping, aerospace, automotive, industrial, and communications applications where flexibility and time-to-market are critical. Key features of the XC6SLX100T-3FGG484C include 101,261 logic cells, 296 user I/O pins, 4,939,776 bits of block RAM, and support for various I/O standards including LVCMOS, LVDS, and HSTL. The device operates from a 1.2V core voltage and is available in the -3 speed grade, which is the fastest speed grade for this part. The 484-ball FBGA package measures 23x23 mm with a 1.0 mm ball pitch, providing a compact footprint for dense PCB designs. The device also includes advanced clock management tiles (CMTs) with PLLs and DCMs, and supports configuration via JTAG, SPI, and BPI interfaces. From a technical depth perspective, the Spartan-6 family is built on a 45 nm low-power copper process, which balances performance and power efficiency. The LXT variant includes high-speed serial transceivers (up to 3.125 Gbps), PCI Express endpoints, and advanced memory controllers, making it suitable for high-bandwidth applications. The device also features dedicated DSP48A1 slices for digital signal processing, providing up to 180 GMACs of performance. The -3 speed grade offers the highest performance, with maximum clock frequencies typically exceeding 400 MHz for internal logic. Typical applications for the XC6SLX100T-3FGG484C include software-defined radio (SDR), industrial motor control, medical imaging, and high-performance computing acceleration. Its combination of logic density, I/O count, and transceiver capabilities makes it ideal for bridging, protocol conversion, and real-time signal processing tasks. The device is also well-suited for aerospace and defense applications where long-term supply and traceability are required. When designing with this FPGA, careful attention must be paid to power supply decoupling and PCB layout. The core voltage (VCCINT) should be regulated at 1.2V with low-noise LDOs or switching regulators, and each power pin should have a 100 nF ceramic capacitor placed as close as possible. Additionally, the configuration bitstream must be stored in an external SPI flash or programmed via JTAG, and the device supports multi-boot for remote updates.

RFC Hubungi kami
XC6SLX150-2FG484C Spartan-6 LX FPGA | AMD Xilinx
XC6SLX150-2FG484C

XC6SLX150-2FG484C Spartan-6 LX FPGA | AMD Xilinx

The AMD Xilinx XC6SLX150-2FG484C is a Spartan-6 LX field-programmable gate array with 338 I/O, 147,443 configuration cells, 11,519 configurable logic blocks, and a 667 MHz internal frequency, housed in a 484-ball CSBGA package measuring 19 x 19 mm with a 0.80 mm pitch. The -2 speed grade targets a practical balance between logic capacity, performance, and power consumption for embedded digital systems. A field-programmable gate array is a programmable digital semiconductor used to implement custom combinational and sequential logic. Its hierarchy extends from FPGA to programmable logic device, digital integrated circuit, and semiconductor. Unlike a fixed-function application-specific integrated circuit, an FPGA can be reconfigured after manufacture, allowing hardware logic, parallel processing, interfaces, and protocol behavior to be updated without changing the printed circuit board. Key features include 338 user I/O, 11,519 configurable logic blocks, 147,443 logic cells, and an internal frequency rated at 667 MHz. The -2 designation identifies the middle Spartan-6 performance grade, while the commercial-temperature suffix supports operation from 0°C to 85°C. Its 484-ball chip-scale BGA package also supports dense PCB routing in systems where a large I/O count is more important than a simple leaded-package footprint. The architecture combines configurable logic blocks with dedicated resources for interconnect, memory, and programmable I/O. This allows parallel datapaths, control logic, serial interfaces, and timing-sensitive functions to coexist in one device. The 667 MHz figure characterizes the device's internal operating frequency and should not be interpreted as the guaranteed performance of every user design; actual throughput also depends on the selected logic path, I/O standard, speed grade, timing constraints, and implemented function. Typical applications include industrial control, test-and-measurement equipment, communications infrastructure, embedded imaging, signal processing, and general-purpose embedded control. The 338 I/O count is particularly useful when the design connects multiple buses, parallel converters, memory interfaces, control signals, or differential communication links without using a separate large pin-count companion device. For PCB implementation, use the AMD Spartan-6 package pinout files when assigning BGA balls and routing the board. Confirm the selected I/O voltage, bank power requirements, decoupling, thermal performance, and configuration interface before release. Device replacement should account for the complete ordering code because speed-grade, temperature-grade, package, and lead-free suffixes affect qualification and behavior. This page combines the XC6SLX150-2FG484C specifications, same-package replacement options, application guidance, and practical FPGA design considerations in one engineering-oriented reference. It also distinguishes the Spartan-6 LX resource level from the electrical, thermal, and ordering differences that determine whether a candidate is a true board-level replacement.

RFC Hubungi kami
XC6SLX150-2FG484I - 147443-Cell Spartan-6 FPGA | AMD
XC6SLX150-2FG484I

XC6SLX150-2FG484I - 147443-Cell Spartan-6 FPGA | AMD

The AMD XC6SLX150-2FG484I is a Spartan-6 LX field-programmable gate array with 147,443 logic cells, 4,939,776 RAM bits, 338 I/O, and a 484-ball BGA package. Its -2 speed grade targets a 667 MHz internal operating frequency, while the FG484 package supports dense programmable-logic and general-purpose I/O requirements in surface-mount systems. A field-programmable gate array is a reconfigurable digital semiconductor containing programmable lookup logic, programmable interconnect, block RAM, and dedicated I/O resources. Within the broader hierarchy, an FPGA is a programmable logic device that sits above simple fixed-function logic ICs and below application-specific programmable devices. Spartan-6 LX devices combine programmable logic, embedded memory, digital signal processing resources, and high-speed I/O in one integrated silicon package. The XC6SLX150-2FG484I provides 11,519 logic cells as identified in the package description, 147,443 total logic elements, and 4,939,776 bits of RAM. Its 338 I/O allow external interfaces to connect processors, memories, communications transceivers, sensors, displays, and industrial equipment. The device uses a nominal core supply range of 1.14 V to 1.26 V, while supporting circuitry determines the appropriate I/O voltage for the selected bank configuration. The -2 suffix identifies the device speed grade, which must be considered during timing closure rather than treated as a software feature. Spartan-6 designs rely on AMD development tools for synthesis, implementation, timing analysis, programming, and debug. Engineers should preserve the electrical, mechanical, and pinout characteristics of the FG484 package when upgrading an existing board or adapting a proven design. Typical applications include industrial control, test and measurement, networking equipment, embedded vision, communications infrastructure, and high-density embedded systems. The combination of 147,443 logic cells and 4,939,776 RAM bits supports parallel data processing, protocol handling, control logic, buffering, and interface bridging without requiring multiple programmable devices. Design attention should focus on bank voltage compatibility, clock requirements, decoupling, thermal performance, and differential-pair routing. Confirm the pinout against the official Spartan-6 package files and complete static timing analysis for the -2 speed grade before releasing a PCB or production bitstream. This product page consolidates package-specific logic, memory, I/O, and device-selection details with practical application guidance. It also distinguishes package-compatible Spartan-6 ordering variants by speed grade, temperature grade, and device type so engineers can identify a replacement without overlooking timing or I/O differences.

RFC Hubungi kami
XC6SLX150-2FG676I - 147443-Cell Spartan-6 FPGA | AMD
XC6SLX150-2FG676I

XC6SLX150-2FG676I - 147443-Cell Spartan-6 FPGA | AMD

AMD XC6SLX150-2FG676I is a Spartan-6 LX field-programmable gate array with 147,443 logic cells, a 498-I/O interface, and a 676-pin FCBGA package. It uses 45 nm CMOS technology and is identified as a 1.2 V device in the Spartan-6 LX family. The -2 speed grade places it in the middle of the available performance range, while the -2FG676I ordering code identifies the industrial-temperature configuration. A field-programmable gate array is a semiconductor whose digital logic, memory blocks, and I/O behavior are configured after manufacture. An FPGA belongs to the programmable-logic hierarchy, combining configurable logic cells and fixed-function blocks into an application-specific parallel-processing system. This makes the device useful when multiple parallel channels, high-speed interfaces, or programmable control logic must be consolidated into one component. The XC6SLX150 provides 147,443 logic cells, 498 I/O, and a 45 nm CMOS implementation. Its -2 speed grade supports a middle-performance design point for industrial systems, while its 1.2 V core supply corresponds to the family's stated supply architecture. The 676-pin FCBGA package supports dense PCB routing and is suited to multilayer boards where fine-pitch escape routing and ground-plane continuity require careful layout planning. Spartan-6 LX devices are designed for configurable embedded systems, industrial control, communications, signal processing, and test equipment. Programmable architecture allows firmware-driven changes to logic behavior, interface timing, and parallel processing pipelines without changing the PCB. The large I/O count also permits simultaneous connections to external converters, memories, transceivers, and control peripherals when board-level pin planning supports the device. Potential uses include industrial data-acquisition systems, programmable logic controllers, video and image-processing front ends, communications gateways, and embedded control platforms. In these applications, the device can consolidate deterministic parallel logic while dedicated companion processors handle operating-system software, networking, or supervisory functions. PCB design requires strict attention to the 19 mm by 19 mm package geometry and 0.80 mm ball pitch. Use the AMD Spartan-6 package pinout files to assign every pin, place decoupling and configuration resources close to their associated balls, and preserve a continuous return path beneath high-speed and clock nets. Configuration, power sequencing, and thermal management must be validated against the manufacturer design guidance. This page combines the device identity, package characteristics, family-level alternatives, comparison parameters, and practical implementation guidance. It helps engineers evaluate the XC6SLX150-2FG676I for dense programmable-logic designs while separating verified device facts from parameters that must be confirmed against the complete manufacturer datasheet.

RFC Hubungi kami
XC6SLX150-3FG484C - 147443-Cell FPGA | AMD | Industrial
XC6SLX150-3FG484C

XC6SLX150-3FG484C - 147443-Cell FPGA | AMD | Industrial

The AMD XC6SLX150-3FG484C is a Spartan-6 LX field-programmable gate array with 147,443 logic cells, 338 I/O connections, a 667 MHz internal frequency, and a 484-ball BGA package. Built on 45 nm CMOS technology with a 1.2 V supply, it combines programmable logic, 11,519 configurable logic blocks, block RAM, and digital signal processing resources in a single device. The -3 speed grade provides the highest performance option identified for the Spartan-6 LX family. An FPGA is a programmable semiconductor used to implement digital logic, interface protocols, control systems, and parallel processing functions. Its configurable architecture contains programmable interconnect and logic resources that can be configured after manufacture. This places the FPGA within the broader hierarchy of programmable logic devices, digital semiconductors, and embedded control hardware, while distinguishing it from fixed-function logic ICs and application-specific processors. The principal features of the XC6SLX150-3FG484C include 147,443 logic cells, 11,519 configurable logic blocks, 338 I/O, and a 667 MHz internal frequency. Its 45 nm CMOS construction and 1.2 V core supply support dense designs requiring substantial parallel logic. The commercial-temperature suffix C supports operation from 0°C to 85°C, while the lead-free 19 mm by 19 mm CSBGA package is intended for compact surface-mount assemblies. The Spartan-6 LX architecture provides a balance of programmable logic, dedicated block RAM, digital signal processing resources, and general-purpose I/O. Designers can implement communication links, control logic, instrumentation front ends, image-processing pipelines, and embedded accelerators without relying on a fixed instruction set. A 484-ball package offers dense routing access, but it requires careful PCB escape routing, via-in-pad or fanout strategies, and controlled assembly conditions for reliable manufacturing. Typical uses include industrial automation, communications infrastructure, test and measurement equipment, embedded video processing, and high-density control systems. The 338 available I/O are particularly useful for parallel interfaces, while the large logic capacity allows multiple independent processing pipelines or control domains to share one programmable device. The 667 MHz internal figure is a device timing characteristic rather than a guarantee that every implemented circuit will run at that frequency. Designers should prioritize the AMD Spartan-6 package pinout files when assigning BGA balls and planning PCB escape routing. Power, ground, configuration, clock, and user-I/O connections must be mapped against the exact device and package files. Decoupling, clock jitter, signal integrity, thermal dissipation, and configuration-boot requirements should be reviewed before schematic and layout release. This page combines exact device characteristics with practical package-planning guidance, configuration considerations, same-package alternatives, and an engineering-oriented comparison. It helps designers determine whether the XC6SLX150-3FG484C fits a design before committing to a 484-ball BGA layout and high-speed FPGA implementation.

RFC Hubungi kami
XC6SLX150-3FG484I - 147443-LE Spartan-6 FPGA | AMD
XC6SLX150-3FG484I

XC6SLX150-3FG484I - 147443-LE Spartan-6 FPGA | AMD

AMD XC6SLX150-3FG484I is a Spartan-6 LX field-programmable gate array with 147,443 logic cells, 338 I/O, and a -3 performance grade in a 484-ball CSBGA package. It operates from a 1.2 V core supply, reaches an internal frequency of 667 MHz, and is specified for the 0 to 85 °C industrial temperature range. The package measures 19 × 19 mm with a 0.80 mm ball pitch. A field-programmable gate array, or FPGA, is a reconfigurable digital semiconductor containing programmable logic, memory, and input/output resources. FPGAs sit above fixed-function logic devices in the implementation hierarchy because designers can alter the interconnect and function of the same physical device by loading a new bitstream. Spartan-6 devices combine this reconfigurable architecture with block RAM, digital signal processing resources, clock management, and high-speed serial transceivers. The XC6SLX150-3FG484I is suited to designs requiring substantial parallel logic and programmable I/O. Its 147,443 logic cells provide substantial capacity for control logic, interface bridging, signal processing, and embedded protocol handling. The 338 I/O support flexible connection to memory, displays, communications equipment, industrial controllers, and test systems. A 667 MHz internal figure reflects the speed class of the device, while the -3 suffix identifies the highest-performance Spartan-6 LX speed grade. The device is manufactured using 45 nm CMOS technology and belongs to the Spartan-6 LX family. Its 484-ball package concentrates a high pin count into a compact surface-mount footprint, but it also requires careful PCB layout, controlled escape routing, and careful power-delivery design. Configuration and programming depend on the selected bitstream and board-level programming method, so engineers should evaluate boot configuration, JTAG access, and power sequencing before releasing the PCB layout. Typical applications include industrial automation, communications infrastructure, instrumentation, embedded control, video-processing pipelines, and high-speed interface aggregation. The 338 I/O are useful for parallel sensor acquisition and legacy peripheral control, while the high logic-cell count supports multiple independent digital subsystems. Industrial equipment benefits from the specified 0 to 85 °C operating range, provided the board layout maintains acceptable junction temperature. A principal design consideration is that the 484-ball package requires dense escape routing and multiple supply connections. Use the AMD Spartan-6 package pinout files to assign every ball correctly, and follow the manufacturer’s power, decoupling, and configuration guidance before fabrication. Confirm the exact I/O standard, voltage tolerances, and bank constraints against the selected design constraints. This product page combines package, logic-resource, speed-grade, and temperature information with practical configuration guidance and same-family drop-in alternatives. It is intended to accelerate engineering selection while keeping the distinction between verified device attributes, package constraints, and application-specific design requirements clear.

RFC Hubungi kami
XC6SLX150-3FG676C - Spartan-6 LX FPGA | AMD Xilinx
XC6SLX150-3FG676C

XC6SLX150-3FG676C - Spartan-6 LX FPGA | AMD Xilinx

AMD Xilinx XC6SLX150-3FG676C is a Spartan-6 LX field-programmable gate array with 498 I/O, a maximum internal frequency of 667 MHz, and a 676-ball FCBGA package measuring 19 x 19 mm with a 0.80 mm pitch. The -3 suffix identifies the highest-performing standard Spartan-6 LX speed grade, while the C suffix identifies the commercial temperature option. A field-programmable gate array is a programmable-logic semiconductor in which digital circuits are configured through configurable logic blocks, programmable interconnect, and I/O resources. Within the device hierarchy, an FPGA is a programmable-logic IC and a semiconductor. Spartan-6 devices integrate programmable logic, dedicated block RAM, programmable input/output resources, and digital clock-management capabilities to support parallel processing, control, interface, and embedded-system designs. The XC6SLX150-3FG676C provides 498 I/O in its 676-ball package and operates at an indicated internal frequency of 667 MHz. Its -3 speed grade is described as having the highest performance among the standard Spartan-6 LX grades -3, -2, and -1L. The commercial temperature range shown for this ordering code is 0°C to 85°C, making the device appropriate for equipment operating within that range. The 676-ball FCBGA package uses a 19 x 19 mm body and 0.80 mm ball pitch. This dense land pattern supports high I/O availability on a compact board area, but it also demands careful PCB layout, escape routing, via strategy, assembly-process planning, and pin-assignment review. AMD provides package pinout files in ASCII format for engineers who require the exact package-level assignment. Typical design roles include digital control systems, high-channel-count parallel I/O, industrial automation equipment, communications infrastructure, test and measurement platforms, and embedded signal-processing systems. The combination of 498 I/O, the -3 speed grade, and the 667 MHz indicated operating frequency is particularly useful when a design benefits from substantial parallel connectivity and configurable logic rather than a fixed application-specific ASIC. PCB implementation should begin with the package pinout and board constraints rather than assumption. Confirm ball assignments, differential-pair rules, power-plane connectivity, decoupling locations, and assembly requirements against the AMD package documentation. When replacing another Spartan-6 device, also verify speed grade, temperature grade, package suffix, device variant, and configuration compatibility. This page organizes the key ordering-code, package, performance, sourcing, and engineering details into a compact reference. It also identifies same-family drop-in candidates and highlights the migration checks that matter most when preserving a 676-ball Spartan-6 board.

RFC Hubungi kami
XC6SLX150-3FG676I - 147443-Cell Spartan-6 LX FPGA | AMD
XC6SLX150-3FG676I

XC6SLX150-3FG676I - 147443-Cell Spartan-6 LX FPGA | AMD

The AMD XC6SLX150-3FG676I is a Spartan-6 LX field-programmable gate array with 147443 logic cells, a 676-ball FBGA package, 45 nm CMOS construction, and a 1.2 V core supply. The -3 speed grade provides the highest performance option identified for the Spartan-6 LX family, while the industrial I suffix identifies an extended-temperature device. Its integrated programmable resources support parallel processing, control, signal processing, and programmable-interface designs where deterministic hardware implementation is preferred over a software-driven processor approach. A field-programmable gate array is a reconfigurable digital semiconductor in which the logic fabric, input/output blocks, clocking resources, and embedded memory are programmed after manufacture. The Spartan-6 LX family targets the FPGA > programmable logic > semiconductor hierarchy, combining high logic density with a broad set of embedded resources for communications, industrial control, instrumentation, embedded processing, and high-volume electronic systems. The XC6SLX150-3FG676I is the large-density member of that family. The device provides 147443 logic cells on a mature 45 nm low-power copper CMOS process. Its 1.2 V core voltage identifies the core operating rail, while separate I/O supply options allow interface standards to be matched to board requirements when their supported values are confirmed in the Spartan-6 documentation. The 676-BGA package provides a high pin count and a compact body measuring 19 x 19 mm with 0.80 mm pitch, according to the package listing. The -3 grade is intended for the highest performance in the LX speed-grade range. Its operating temperature range is 0 to 85 degrees Celsius, making the device appropriate for industrial-temperature equipment that remains within this specified envelope. Designers should use the AMD Spartan-6 package pinout files when assigning balls to power, ground, configuration pins, clock pins, and user I/O. The architecture is particularly useful when a design needs parallel channels, deterministic latency, hardware timing, or configurable logic that can be updated independently of a general-purpose software runtime. Typical applications include industrial automation, test and measurement equipment, communications infrastructure, embedded control systems, video and image processing, and signal acquisition. These uses benefit from the device's combination of logic density, programmable I/O, and parallel processing resources. System designs must still account for external memory, clock jitter, power sequencing, decoupling, signal integrity, and thermal performance at the selected operating speed. For PCB implementation, follow the manufacturer package and pinout files for ball assignment and escape routing, provide continuous power and ground planes, and keep high-speed clocks and differential interfaces away from noisy switching nodes. Configuration storage and its interface should also follow the Spartan-6 design guidance. The key engineering trade-off is that the -3 grade prioritizes performance, whereas a lower-speed grade may offer a different balance of timing margin, power, and thermal requirements. This product overview combines the device's package, density, process, speed-grade, temperature, and electrical attributes with practical FPGA design guidance. It also distinguishes same-package alternatives by logic density, speed grade, and temperature suffix, helping engineers verify pin compatibility and performance requirements before approving a replacement.

RFC Hubungi kami
XC6SLX150-3FGG676C - Spartan-6 LX FPGA 147K LE | AMD Xilinx
XC6SLX150-3FGG676C

XC6SLX150-3FGG676C - Spartan-6 LX FPGA 147K LE | AMD Xilinx

The AMD Xilinx XC6SLX150-3FGG676C is a Spartan-6 LX family Field-Programmable Gate Array (FPGA) delivering 147,443 logic cells, 23038 Adaptive Logic Modules (ALMs), and 4,939,776 system gates in a 676-ball Fine-Pitch Ball Grid Array (FGG676) package. It carries the -3 commercial speed grade with a maximum core clock of 862 MHz, offers 498 user I/Os, and operates over the commercial 0C to +85C temperature range per the FBGA-676 27 x 27 mm, 1.0 mm pitch package profile. An FPGA (Field-Programmable Gate Array) is a type of programmable logic device (PLD) that combines logic gates, multipliers, embedded memory, and high-speed transceivers into a configurable fabric. FPGA sits in the hierarchy of programmable logic -> programmable logic device -> semiconductor -> integrated circuit. The Spartan-6 LX family targets high-volume cost-sensitive applications that demand high logic density, abundant block RAM, and integrated DSP slices without the power overhead of Virtex-class devices. By programming the LUTs, routing, and IP cores via the ISE Design Suite, engineers create custom accelerators, glue logic, video pipelines, and connectivity subsystems on a single chip. Key features of the XC6SLX150-3FGG676C include 135 Kbit distributed RAM, 4.8 Mbit block RAM, 180 DSP48A1 slices, four clock management tiles with PLL, and 498 SelectIO signals supporting LVCMOS, LVDS, and LVTTL standards. The device integrates PCI Express Endpoint blocks, GTP transceivers are NOT present on this LX variant, and supports DDR, DDR2, DDR3, and QDRII+ memory interfaces through dedicated hardware controllers. Configuration is via SPI, BPI, JTAG, or Platform Flash XCF, enabling flexible in-system reprogrammability for field upgrades. From a system-architecture perspective, the Spartan-6 LX uses a 45 nm copper CMOS process backed by an optimized core voltage of 1.14 to 1.26 V and auxiliary supply of 2.5 / 3.3 V for I/O banks. The 676-BGA package exposes 26 user I/O banks so designers can support mixed-voltage interfaces (1.2 V to 3.3 V) on a single die, ideal for bridging legacy and modern logic families in industrial control or motor-drive boards. Typical applications include industrial motor control and factory automation backbones, video surveillance processing pipelines, medical imaging front-end buffers, automotive driver-assistance pre-processing prototypes, and avionics display controllers. The combination of abundant I/O and large block RAM makes the LX150 particularly attractive for high-channel-count data acquisition and parallel sensor aggregation. When designing with this part, validate that the 676-BGA layout supports at least four routing layers with laser-drilled microvias, since 1.0 mm pitch BGA escape routes demand controlled-impedance planning. Also confirm that the ISE WebPACK license covers all required IP cores for development. This page synthesizes distributor availability, drop-in Spartan-6 family alternatives, and practical layout notes not bundled into the manufacturer datasheet.

RFC Hubungi kami