Produk (44,000+)

ICS570AT - 170MHz Spread Spectrum Clock | Renesas
ICS570AT

ICS570AT - 170MHz Spread Spectrum Clock | Renesas

The Renesas Electronics ICS570AT is a 170 MHz fanout-distribution clock generator and zero-delay buffer (ZDB) integrated into a 8-SOIC package. It combines a clock-generation function with fanout distribution and zero-delay buffering, allowing a system to multiply, distribute, and buffer a reference clock while controlling the relationship between input and output edges. The device is identified as a spread-spectrum clock generator for applications where controlled clock-spectrum spreading can reduce narrowband emissions. A zero-delay buffer is an integrated timing device that compensates for the propagation delay introduced by clock fanout networks. By placing the buffer close to the load or in the fanout path, the device helps preserve edge alignment between clock outputs. The ICS570AT integrates this clock-distribution role with analog/digital phase-locked-loop technology, a technique also used in multiplier-based clocking solutions. The principal documented characteristics of the ICS570AT are its 170 MHz operating class, spread-spectrum clock-generator function, zero-delay-buffer function, fanout-distribution capability, and 8-SOIC surface-mount package. These characteristics place it in the clock and timing hierarchy between a single reference oscillator and the multiple clock domains required by processors, converters, transceivers, and memory interfaces. The ICS570AT is useful when a board requires more than a passive clock fanout buffer. Passive fanout devices introduce insertion delay and may not compensate for load-dependent skew, while the integrated PLL-based architecture in the ICS570AT is intended to regenerate and distribute a clock with phase adjustment. The spread-spectrum feature adds another design tool for systems where reducing concentrated spectral peaks is a priority. Typical uses include audio and network interface clocking, digital signal processing subsystems, data-conversion equipment, communications modules, and industrial control boards. In these systems, the device can drive downstream clock-consuming circuits from a shared reference while keeping clock edges aligned across multiple branches. When laying out a design around the ICS570AT, follow the pin-description table and recommended decoupling network in the Renesas 570 datasheet. Keep the clock output traces short, use controlled-impedance routing, and avoid placing noisy switching nodes beneath the device. Confirm the selected spread-spectrum profile, output count, and timing budget against the system requirement before releasing the layout. This page combines the manufacturer datasheet information with package-level guidance, application context, comparison parameters, and practical layout considerations. It is intended to help engineers evaluate the ICS570AT as a drop-in clock-distribution choice and to identify the checks required before substituting another PLL or zero-delay-buffer device.

RFC Hubungi kami
ICS570B - 170 MHz 3.3 V PLL Clock Buffer | Renesas
ICS570B

ICS570B - 170 MHz 3.3 V PLL Clock Buffer | Renesas

The Renesas Electronics ICS570B is a 3.3 V fanout distribution, spread-spectrum clock generator and zero-delay buffer (ZDB) that provides a maximum output clock frequency of 170 MHz in an 8-pin SOIC package. It combines a proprietary analog/digital phase-locked loop with clock multiplication, fanout, duty-cycle correction and low-skew output buffering for systems that require multiple related clocks. A zero-delay buffer is a clock-integrity device that uses phase-locked-loop techniques to reproduce an input clock at its outputs with very small propagation delay relative to the source clock. It belongs to the clock and timing hierarchy of clock generators, PLL multipliers, fanout buffers, clock drivers and zero-delay buffers. The ICS570B is intended for systems where several logic domains require related clocks without introducing significant inter-clock skew. The ICS570B supports output clock frequencies up to 170 MHz at 3.3 V and can select between 14 multiplication ratios from 0.5x to 32x. It also includes fanout distribution, spread-spectrum clock generation and the ability to recover a degraded input-clock duty cycle. The maximum input-to-output skew is 300 ps for output rates above 60 MHz, making it useful for high-speed communications, storage, networking and processor clock trees. Internally, the device uses analog/digital PLL techniques rather than a simple static clock buffer. This architecture allows one reference clock to be multiplied and distributed while limiting output-to-output skew. The published family information also identifies the B version as the 3.3 V option and the A version as the 5 V option, making supply-voltage compatibility a critical selection criterion when comparing family members. Typical uses include frequency multiplication for a CPU or bus clock, fanout to multiple peripheral clock domains, spread-spectrum clock generation for reducing electromagnetic interference, and duty-cycle restoration of a degraded source clock. The 8-pin SOIC package supports conventional surface-mount assembly and keeps the footprint compact for clock-distribution sections on communication, industrial and computing boards. Designers should verify the input and output reference clock requirements, the selected multiplication ratio, output termination and load capacitance against the Renesas 570 datasheet before layout. Keep clock traces short and match trace lengths where output-to-output skew is critical. Provide a continuous ground reference under the device and place decoupling capacitors close to the supply pins. This page consolidates verified manufacturer and distributor information, published price references, family-level drop-in options and practical clock-tree design guidance. It also identifies where application-specific data, such as exact supply current, temperature range and production lifecycle status, must be confirmed against current manufacturer documentation.

RFC Hubungi kami
ICS570BI - 170MHz 3.3V Zero Delay Buffer | Renesas
ICS570BI

ICS570BI - 170MHz 3.3V Zero Delay Buffer | Renesas

Renesas Electronics ICS570BI is a 170 MHz fanout-distribution, spread-spectrum clock generator and zero-delay buffer built around analog/digital phase-locked-loop techniques. The B-version is intended for 3.3 V designs and is supplied in an 8-pin SOIC package measuring approximately 3.90 mm in width. Its zero-delay-buffer architecture distributes a clock signal while compensating for propagation delay through the PLL-based clock path. A zero-delay buffer is a clock-management semiconductor that reproduces an input clock at one or more outputs with very low transfer delay. It belongs to the clock buffer hierarchy, where it sits between a clock source and digital logic requiring multiple synchronized copies. Unlike a basic logic buffer, the ICS570BI combines an analog/digital PLL with fanout and spread-spectrum clock functions, placing it within the broader clock and timing IC category. The principal operating characteristics visible in the product documentation include a maximum clock frequency of 170 MHz, one fanout output, a 3.3 V B-version supply target, spread-spectrum clock generation, zero-delay operation, and an 8-pin SOIC package. The spread-spectrum function is useful when reducing concentrated clock energy on a narrow frequency band, while the fanout output provides a local clock for digital circuitry. The single-output arrangement favors designs that need one precisely distributed clock rather than several independent destinations. Renesas describes the ICS570 as a performance upgrade within the IDT ClockBlocks family, using proprietary analog/digital PLL techniques. This architecture is intended to support higher-speed and lower-voltage systems while maintaining a clock distribution function. The B version is specifically recommended for 3.3 V designs, while the A version is associated with 5 V designs; substituting those versions requires a complete power and timing review rather than simple interchangeability. Typical uses include processor-clock distribution, communications equipment, data-conversion systems, digital control boards, and other synchronous electronics requiring a low-delay clock source. In these applications, the device can reduce the load presented to an upstream oscillator or clock controller while delivering a clean local copy to a receiving circuit. Spread-spectrum operation can also assist systems that need to reduce narrowband clock peaks, although exact spread-spectrum range and configuration details must be confirmed from the manufacturer datasheet. The primary design consideration is power-domain compatibility: the ICS570BI is the 3.3 V version and must not be treated as an automatic substitute for a 5 V ICS570 variant. Board designers should also preserve the bypass-capacitor and layout guidance in the manufacturer datasheet because PLL-based clock devices can be sensitive to return-current paths and supply-noise coupling. A solid ground plane and short supply connections help isolate the clock output from switching noise. This product page combines the manufacturer function description with the exact package and operating identifiers, then adds application guidance, comparison fields, and practical design considerations. It is intended to help engineers identify the correct 3.3 V zero-delay buffer, locate the authoritative datasheet, assess replacement constraints, and plan a clock-distribution layout before committing the footprint to production hardware.

RFC Hubungi kami
ICS570BIT - 170MHz Spread Spectrum Clock Buffer | Renesas
ICS570BIT

ICS570BIT - 170MHz Spread Spectrum Clock Buffer | Renesas

The Renesas Electronics ICS570BIT is a fanout distribution, spread-spectrum clock generator and zero-delay buffer operating up to 170 MHz in an 8-SOIC surface-mount package. It provides a 1:2 fanout ratio and a 3.15 V to 3.45 V supply range. The ICS570BIT uses proprietary analog/digital phase-locked-loop techniques to distribute a clock while reducing electromagnetic emissions through spread-spectrum operation. Its zero-delay-buffer architecture helps preserve edge timing between a source clock and the driven output clocks. A zero-delay buffer is a clock-integrity device that reproduces a clock at its outputs with very little propagation delay while compensating for loading and skew. The ICS570 belongs to the Renesas ClockBlocks family and combines clock generation, fanout distribution, and zero-delay buffering in one integrated circuit. This integration can reduce the number of separate timing components required in systems that need multiple related clock outputs. The principal operating characteristics include a maximum clock frequency of 170 MHz, a 1:2 output ratio, and a 3.15 V to 3.45 V operating voltage range. The device is identified as a fanout distribution, spread-spectrum clock generator, and zero-delay buffer. Its 8-SOIC package provides a compact surface-mount solution for clock-generation, communications, industrial-control, and embedded systems. The spread-spectrum function is useful when reducing the spectral concentration of a clock signal. By varying the clock frequency over a controlled range, the device can reduce narrowband emissions and improve system-level electromagnetic compatibility. The PLL-based architecture is intended to provide clock distribution while maintaining predictable output relationships for downstream digital circuitry. Typical applications include clock fanout for communications equipment, local clock distribution in industrial systems, clock generation for embedded processors, and EMI-sensitive digital platforms. The ICS570BIT is especially relevant when a design requires two outputs, a maximum operating frequency of 170 MHz, and 3.3 V-class operation. Its integrated functions help simplify clock trees while preserving controlled edge relationships. When designing around the ICS570BIT, verify the input and output timing requirements, supply-voltage tolerance, and the number of loads connected to each output. Keep clock traces short and use controlled-impedance routing where signal-integrity requirements are demanding. This page combines the manufacturer documentation, distributor listing information, package details, and engineering-oriented selection guidance for the ICS570BIT.

RFC Hubungi kami
ICS570BT - 170MHz Zero-Delay Clock Buffer | Renesas
ICS570BT

ICS570BT - 170MHz Zero-Delay Clock Buffer | Renesas

The Renesas Electronics ICS570BT is a fanout distribution, spread-spectrum clock generator and zero-delay buffer with a maximum operating frequency of 170 MHz and one clock output. The device is packaged in an 8-pin SOIC measuring 3.90 mm wide and uses proprietary analog/digital phase-locked-loop techniques to provide low-skew clock distribution. It is categorized as a clock generator, PLL, and frequency synthesizer within integrated clock and timing circuitry. A zero-delay buffer is a clock-distribution component that reproduces an input clock at its outputs while compensating for internal propagation delay. By combining a phase-locked loop with buffer functions, the ICS570BT can support multiple logic domains that require closely related clock signals. The fanout configuration permits one input clock to be distributed to one output, while the spread-spectrum capability can reduce electromagnetic emissions in systems where controlled clock spectral shaping is useful. The ICS570BT's key documented characteristics include a 170 MHz maximum frequency and an 8-SOIC package. Its zero-delay-buffer architecture uses proprietary analog/digital PLL techniques to control phase and timing relationships. The device is intended for synchronizing outputs in personal computers, data communications, graphics, and video systems, and its off-chip feedback paths can allow system-level timing loops to eliminate delay through other devices. The device combines frequency multiplication and zero-delay buffering in one timing IC. This integration can reduce the number of separate clock-handling components required in a board design. The fanout architecture is particularly useful when a single high-speed reference must feed downstream digital logic, while the spread-spectrum feature provides an additional method for controlling spectral content. Designers should still evaluate loop stability, output jitter, skew, and power-supply requirements against the exact operating conditions of the target system. Typical applications include personal-computer clock synchronization, data-communication equipment, graphics systems, video infrastructure, and other high-speed digital platforms. In these systems, the ICS570BT can provide a common clock reference while maintaining timing alignment among multiple output domains. Its 170 MHz ceiling makes it suitable for systems whose functional clock rates remain below that limit, including communications interfaces, processor support circuits, and clock-distribution networks. When designing around the ICS570BT, preserve the recommended input, output, and decoupling connections in the manufacturer application guidance. Keep high-speed traces short, use a controlled reference plane, and place support components close to their associated pins. Because the part combines PLL and buffer functions, validate startup, feedback configuration, output phase, and system-level skew across voltage and temperature rather than assuming ideal zero-delay behavior. This product page consolidates the verified 170 MHz frequency, one-output fanout architecture, 8-SOIC package, zero-delay-buffer function, spread-spectrum capability, sourcing links, and practical selection guidance. It also distinguishes documented facts from specifications that must be confirmed in the manufacturer datasheet before schematic release, timing validation, or production procurement.

RFC Hubungi kami
ICS571M - 160MHz Zero Delay Buffer | Renesas Electronics
ICS571M

ICS571M - 160MHz Zero Delay Buffer | Renesas Electronics

Renesas Electronics ICS571M is a 160 MHz fanout distribution zero-delay buffer IC packaged in an 8-pin SOIC measuring 3.90 mm wide. It is designed for clock distribution applications where a source signal must be reproduced across multiple destinations while minimizing propagation delay. The verified distributor listing identifies the device as a one-output fanout buffer with zero-delay characteristics. A zero-delay buffer belongs to the clock and timing IC hierarchy. Unlike a conventional logic buffer, which introduces a specified propagation delay, this device uses an internal buffer arrangement intended to preserve clock-edge timing between the driving source and distributed loads. Fanout buffers are used to reduce loading on a clock generator, isolate multiple destinations, and provide a repeatable distribution point on clock, data, or control networks. The principal verified characteristics are a maximum clock frequency of 160 MHz, one fanout output, and an 8-SOIC surface-mount package with a stated width of 3.90 mm. The distributor data also classifies ICS571M under Clock Generators, PLLs, and Frequency Synthesizers, reflecting its primary use within clock and timing systems. Detailed supply-voltage, output-impedance, skew, jitter, and temperature limits were not present in the supplied verified records. ICS571M is suited to communication equipment, processor clock networks, data converters, instrumentation, and industrial electronics requiring local clock distribution. Its small SOIC outline supports compact designs, while the zero-delay architecture can be preferable when an upstream source must drive several clocked loads without intentionally adding another propagation-delay stage. Designers should verify input slew rate, output loading, supply voltage, and timing margins against the manufacturer datasheet before release. Decoupling and return-path planning remain important because a clock buffer can reproduce upstream supply noise and edge distortion at every distributed output. PCB length matching may also be required in systems with stringent setup-and-hold limits. This product record consolidates verified distributor specifications, sourcing links, practical application guidance, and honest data-gap disclosures. It also distinguishes confirmed parameters from values that require datasheet review, helping engineers make a technically defensible selection without treating unverified electrical limits as guaranteed specifications.

RFC Hubungi kami
ICS571MT - 160MHz 1:2 Zero Delay Buffer | Renesas Electronics
ICS571MT

ICS571MT - 160MHz 1:2 Zero Delay Buffer | Renesas Electronics

Renesas Electronics ICS571MT is a high-speed, low-phase-noise zero delay buffer (ZDB) designed to distribute one CMOS clock input to two true CMOS outputs. It operates up to 160 MHz, supports a 1:2 input-to-output ratio, and is packaged in an 8-pin SOIC measuring approximately 3.90 mm wide. The part integrates analog and digital phase adjustment to minimize clock skew and preserve low-noise timing performance. A zero delay buffer is a clock-management IC that uses a phase-adjustable buffer architecture to compensate for propagation delay introduced by clock distribution networks. Within the broader hierarchy, it is a fanout buffer, then a clock buffer, then a clock and timing IC, and finally a semiconductor. By placing a ZDB close to a clock-consuming circuit, designers can reduce the timing penalty associated with board traces, while a 1:2 ratio allows one source clock to feed two independent loads. Key characteristics include a maximum frequency of 160 MHz, CMOS inputs, CMOS outputs, PLL capability, one input circuit, two true outputs, and an input-to-output ratio of 1:2. The ICS571MT can also operate as a low-phase-noise frequency multiplier according to the manufacturer description. Its low-skew outputs are useful when related clocks must remain closely aligned, and phase noise better than -100 dBc/Hz is described from 10 kHz to 1 MHz offset from the carrier under the cited operating conditions. The typical application is clock fanout in telecommunications, networking, industrial control, test and measurement, and digital processing systems. It can distribute a common clock to two domains, provide clock buffering between a source and a load, or provide two low-skew copies of a reference signal. The 8-pin SOIC package supports conventional surface-mount assembly and is easier to handle than a fine-pitch BGA package. Designers should maintain short, impedance-controlled clock traces, use a ground reference close to the device, and verify source and load termination against the clock edge rate. A nominal maximum frequency does not guarantee acceptable timing margin in every board environment; rise time, loading, return paths, and available setup and hold time must be evaluated together. This page combines the manufacturer-described operating characteristics, packaging information, application guidance, and verified drop-in candidates to support faster component evaluation and board-level sourcing decisions.

RFC Hubungi kami
ICS574M - 160MHz 1:4 PLL Zero-Delay Buffer | Renesas
ICS574M

ICS574M - 160MHz 1:4 PLL Zero-Delay Buffer | Renesas

Renesas Electronics ICS574M is a PLL-based 1:4 fanout and zero-delay buffer rated up to 160 MHz, with CMOS inputs and CMOS clock outputs in an 8-SOIC surface-mount package. The device contains one clock circuit, uses a 1:4 input-to-output ratio, and provides four low-skew outputs for high-speed clock-distribution systems. Its operating-temperature range is 0°C to 70°C, and supplier records identify the part as obsolete or end-of-life. A zero-delay buffer is a clock and timing IC that combines a phase-locked loop with multiple output stages. Within the product hierarchy, it belongs to clock distribution devices, which are part of clock and timing integrated circuits and ultimately semiconductor signal-management components. By compensating for internal propagation delay while distributing one source clock across four outputs, this type of device helps maintain controlled timing relationships across multiple digital loads. The primary characteristics of the ICS574M are its 160 MHz maximum operating frequency, 1:4 input-to-output fanout, CMOS logic compatibility, and PLL-based zero-delay operation. Four independently available clock outputs make the device suitable where one incoming reference must drive several clock domains while limiting output-to-output timing skew. The 8-SOIC package provides a compact surface-mount format with a stated body width of 3.90 mm and lead pitch of 0.154 inches. Technically, the PLL-based architecture is intended to reduce propagation delay and skew across distributed outputs. The verified device information identifies the input and output technology as CMOS and confirms that PLL operation is supported. Detailed electrical limits, supply-voltage operating range, output-to-output skew, input-to-output delay, operating-current consumption, and timing tolerances are not available in the supplied source data and therefore require confirmation against the original manufacturer datasheet before release to production. Typical uses include processor and peripheral clock distribution, data-processing systems, communications equipment, test systems, and other high-speed digital platforms requiring one reference clock to feed four destinations. Because the ICS574M is listed as obsolete, engineers should confirm the available lifecycle status, remaining supply, and any formal last-time-buy or end-of-life schedule with the authorized distributor. The primary design consideration is timing closure. Board traces must be length- and impedance-matched when the four outputs must arrive at their destinations within a tightly controlled interval. Decoupling, grounding, and output loading should follow the original datasheet guidance, while any substitute must be checked for pin assignment, supply voltage, frequency ceiling, skew, and output enable behavior rather than package name alone. This product record combines verified distributor specifications, lifecycle evidence, package information, and practical replacement guidance. It distinguishes documented electrical facts from unavailable parameters, helping engineers identify whether the original ICS574M remains suitable or whether a redesign is required.

RFC Hubungi kami
ICS574MI - 160 MHz PLL Zero-Delay Fanout Buffer | Renesas
ICS574MI

ICS574MI - 160 MHz PLL Zero-Delay Fanout Buffer | Renesas

The Renesas Electronics ICS574MI is a PLL-based zero-delay fanout buffer designed for high-speed clock distribution, operating up to 160 MHz and providing four low-skew CMOS outputs from one clock input. The device is packaged in an 8-SOIC and is identified as a 1:4 fanout, zero-delay buffer with an integrated PLL. Its primary role is to align a distributed clock with the source clock while compensating for propagation delay introduced by board traces, connectors, and loading. A zero-delay buffer is a clock-and-timing integrated circuit that uses phase-locked-loop technology to reproduce an input clock at its outputs with nearly zero net propagation delay. It belongs to the fanout-buffer hierarchy within clock and timing ICs, where PLL-based devices trade additional internal complexity for improved edge alignment and predictable output skew. This makes the ICS574MI suitable for systems in which several circuits must receive a related clock without accumulating cumulative trace-delay differences. According to the Renesas 574 Datasheet, the ICS574 is based on proprietary low-jitter PLL techniques. The documented operating point includes speeds up to 160 MHz at 3.3 V, with four low-skew outputs. When one output is returned directly to the FBIN input, the rising edge of each output can be aligned with the rising edge of the feedback signal, allowing the feedback path to compensate for clock distribution delay around the board. Typical uses include processor and FPGA clock distribution, memory-interface clock fanout, backplane clock replication, communications equipment, and test-and-measurement systems. The 1:4 ratio reduces the number of separate clock-driver channels required when four destinations need a common timing reference. Because a fanout buffer does not regenerate data content, its outputs are intended for clock or low-fanout control signals rather than high-speed data traffic. The key design consideration is output loading and board topology. Short, matched traces, terminated clock networks, and appropriate supply decoupling help preserve edge quality and limit skew. When cascading multiple fanout devices, engineers should verify cumulative jitter, output-to-output skew, duty-cycle distortion, and loading with the complete clock distribution network rather than relying on individual device specifications.

RFC Hubungi kami
ICS574MIT - 160MHz 1:4 Zero-Delay Buffer | Renesas
ICS574MIT

ICS574MIT - 160MHz 1:4 Zero-Delay Buffer | Renesas

The Renesas Electronics ICS574MIT is a PLL-based zero-delay fanout buffer operating up to 160 MHz, with a 1:4 input-to-output ratio and four low-skew CMOS outputs in an 8-pin SOIC package. It is designed for high-speed systems requiring closely aligned clock signals and negligible propagation delay. A zero-delay buffer is a clock-distribution device that uses phase-locked-loop technology to compensate for internal and board propagation delay. In the clock and timing hierarchy, the ICS574MIT belongs to the fanout-buffer class, where a single periodic input is reproduced across multiple outputs with tightly controlled skew. This makes it useful when several sequential logic sections must receive a common clock without accumulating separate distribution delays. The ICS574MIT provides a maximum operating frequency of 160 MHz, four outputs, and a 1:4 fanout ratio. Its CMOS input and output interface operates from a 3.3 V supply. Connecting one output directly to the FBIN feedback input aligns the rising edge of each output with the rising edge of the feedback signal, supporting deterministic clock relationships across the distributed network. Internally, the device uses proprietary low-jitter PLL techniques to generate four low-skew outputs. This architecture is intended for high-speed processor, memory, networking, and communications systems where clock skew can limit setup and hold timing margin. Its single-input, four-output organization reduces the number of separate buffers required when several destination devices must operate from the same source clock. Typical uses include memory clock distribution, network-interface clock fanout, high-speed digital backplanes, processor clock routing, and communication equipment. The device is particularly useful where the source clock must reach multiple endpoints while maintaining a controlled relationship between output edges. The compact 8-pin SOIC package also supports conventional surface-mount PCB assembly. For implementation, reserve the feedback path as a short, controlled connection from one clock output to FBIN, and observe the maximum operating frequency, supply-voltage, and output-loading limits in the manufacturer datasheet. Confirm the pin assignment and input/output timing relationship against the selected package suffix before releasing a PCB layout. This product reference combines the Renesas manufacturer description, distributor specifications, package information, operating characteristics, and practical replacement guidance. It also identifies where a drop-in substitute cannot be established without additional manufacturer timing data, preventing a package-compatible candidate from being presented incorrectly as a production replacement.

RFC Hubungi kami
ICS574MT - 160 MHz PLL Zero-Delay Fanout Buffer | Renesas
ICS574MT

ICS574MT - 160 MHz PLL Zero-Delay Fanout Buffer | Renesas

The Renesas Electronics ICS574MT is a PLL-based zero-delay fanout buffer for high-speed digital systems, operating up to 160 MHz with four low-skew outputs and a 1:4 input-to-output ratio. It is housed in an 8-SOIC package and is intended for clock distribution, memory interfacing, and other high-speed applications requiring closely aligned output edges. The device uses CMOS input and output signals and is based on IDT's proprietary low-jitter phase-locked-loop techniques. One output can be fed back to the FBIN input to align rising output edges with the input clock. ICS574MT is the tube-packaging ordering code for the 8-SOIC device; other order codes can represent different temperature or shipping configurations. A zero-delay buffer is a clock-distribution integrated circuit that compensates for clock-propagation delay between a source and multiple destinations. PLL-based implementations use a phase-locked loop to create an internal clock relationship that allows the outputs to track the input edge while adding little nominal propagation delay. In the broader IC hierarchy, ICS574MT belongs to the clock and timing IC family, combining clock generation, phase control, and multi-output distribution functions in one package. The principal features of ICS574MT include a maximum operating frequency of 160 MHz, four CMOS outputs, and a 1:4 fanout ratio. The PLL architecture is intended to minimize output-to-output skew, while low jitter helps preserve timing margin in high-speed systems. Its single-circuit organization and compact 8-SOIC package make it suitable for compact systems that need several synchronized clock copies without implementing a discrete oscillator or multi-stage buffer tree. Typical uses include processor and FPGA clock distribution, memory clock fanout, high-speed interface clocking, data-converter sampling systems, and communications equipment. The feedback connection can be used when the application requires the output rising edges to be aligned with the reference input. Because the device is intended for high-speed digital operation, board-level trace matching, controlled impedance, adequate decoupling, and careful handling of clock return paths are important for maintaining signal integrity. Designers should compare the complete datasheet limits for supply voltage, input and output thresholds, output drive, propagation delay, jitter, skew, temperature range, and package tolerances before finalizing a circuit. The ICS574MT is most appropriate when a PLL-based four-output zero-delay buffer is needed and the board can provide a clean, continuous clock reference. Request current availability and sourcing details through the Request a Quote form on this page.

RFC Hubungi kami
ICS580M-01 270MHz 2:2 Clock Multiplexer | Renesas Electronics
ICS580M-01

ICS580M-01 270MHz 2:2 Clock Multiplexer | Renesas Electronics

Renesas Electronics ICS580M-01 is a 2:2 zero-delay clock multiplexer and buffer designed for glitch-free switching between two clock sources. It supports clock frequencies up to 270 MHz, operates from a 2.5 V to 5.5 V supply, and is packaged in a 16-SOIC configuration measuring 0.154 inches, or 3.90 mm, in width. The device provides two clock outputs and a control input for selecting the active clock path. A clock multiplexer is a timing-device category used to route one of two clock signals toward a downstream circuit while minimizing switching disturbances. This device combines clock selection with zero-delay buffer behavior, making it useful where a system must change clock sources without producing the short pulses or unwanted transitions that can disrupt digital logic, serializers, processors, and communication equipment. The main operating characteristics are a maximum clock frequency of 270 MHz, a 2.5 V to 5.5 V supply-voltage range, and a 16-SOIC package. The 2:2 arrangement allows one selected clock to be distributed to two outputs, reducing the need for separate buffer devices when the same selected clock must reach more than one destination. ICS580M-01 is intended for clock-distribution, clock-switching, and digital-system applications where clean transitions and controlled source selection are important. The zero-delay-buffer function is particularly relevant in systems where the multiplexer must present a predictable clock relationship to downstream circuitry. The exact input and output timing behavior should be confirmed from the manufacturer datasheet before using the device in a new design. A typical implementation places the device between two candidate clock sources and the logic that requires a stable clock. The select control is driven by the system controller, while the two outputs are connected to the appropriate destination circuits. Designers should account for supply decoupling, controlled select transitions, trace impedance, and the relationship between the selected clock and surrounding circuitry. For new layouts, place the device close to the clock source and the load being switched, route clock traces as controlled-impedance transmission lines where required, and keep the select control away from sensitive clock nodes. Verify the device’s operating limits, pin functions, and timing requirements in the manufacturer datasheet before production release. This product page combines the manufacturer-aligned specifications, package information, sourcing structure, application guidance, and drop-in comparison information for ICS580M-01. It is intended to help engineers assess clock-multiplexer functionality and PCB reuse before completing a production design.

RFC Hubungi kami
ICS581G-01 - 200MHz PLL Zero-Delay Clock Multiplexer | Renesas
ICS581G-01

ICS581G-01 - 200MHz PLL Zero-Delay Clock Multiplexer | Renesas

The Renesas Electronics ICS581G-01 is a glitch-free, phase-locked-loop clock multiplexer with a maximum operating frequency of 200 MHz, two clock inputs, four true outputs, and zero input-to-output delay in a 16-pin TSSOP package. The device gives designers a zero-delay clock fanout function with user-controlled selection between the two input clocks. A PLL-based clock multiplexer is a clock-and-timing integrated circuit that combines phase-locked-loop technology with clock selection or distribution. It belongs to the hierarchy of clock-and-timing ICs, where it serves as a specialized input-to-output clock distribution device. Unlike a conventional multiplexer that introduces propagation delay through logic gates, the ICS581G-01 uses a PLL to align its output phase with the selected reference clock. The principal features include operation up to 200 MHz, four non-inverted clock outputs, and the ability to configure those outputs as one, three, or four active outputs. User-controlled mux switching distinguishes the ICS581G-01 from the automatically switching ICS581-02. According to the manufacturer datasheet, the architecture is designed to suppress output glitches while providing zero delay from input to output. The PLL-based implementation supports predictable clock phase relationships across multiple loads when board layout, power distribution, and output configuration are handled correctly. Each of the four outputs can be enabled as part of a one-output, three-output, or four-output arrangement. This flexibility allows the same device to serve as a one-to-four clock fanout element, a two-input clock selector, or a redundant-clock transition component. Typical uses include processor and FPGA clock distribution, memory-clock fanout, network-interface clocking, telecommunications equipment, industrial control systems, and test-and-measurement platforms. The 200 MHz upper operating frequency makes the device suitable for systems whose clock architecture benefits from phase-aligned outputs rather than conventional buffered propagation delay. PCB implementation should use short, impedance-controlled clock traces, solid ground-plane continuity, and decoupling close to the supply pins. The TSSOP-16 package requires careful fanout because four outputs must reach separate destinations without introducing avoidable skew. Input and output timing should be evaluated together with loading, trace length, and the switching method used by the downstream logic. This page consolidates the device function, verified electrical and package characteristics, practical clock-tree design notes, and qualified drop-in alternatives. It also distinguishes the user-controlled ICS581G-01 from related suffix variants so engineers can assess timing, temperature, packaging, and lifecycle requirements before approving a substitution.

RFC Hubungi kami
ICS581G-02 - 200MHz Zero-Delay Clock Buffer | Renesas
ICS581G-02

ICS581G-02 - 200MHz Zero-Delay Clock Buffer | Renesas

The Renesas Electronics ICS581G-02 is a zero-delay, glitch-free clock multiplexer and fanout buffer rated for 200 MHz operation in a 16-pin TSSOP package measuring 4.40 mm in width. The device provides four true outputs, supports PLL-based clock distribution, and is designed for systems that require multiple synchronized clock outputs with minimal insertion delay. A clock multiplexer is an integrated timing device that routes one of several input clocks to a shared output while maintaining controlled phase relationship between the selected sources. Clock buffers reproduce a timing signal across multiple loads to improve fanout and isolate source and destination circuits. The ICS581G-02 combines these functions in a single clock and timing IC, placing it within the PLL-based clock distribution hierarchy used in communications, computing, industrial control, and test equipment. Key characteristics include a maximum stated operating frequency of 200 MHz, four non-inverted outputs, zero-delay clock distribution, glitch-free multiplexing, and a 16-pin TSSOP package with 0.65 mm pitch. The four-output arrangement allows a single device to feed several clock domains while reducing the number of separate buffers required on the printed circuit board. Its TSSOP package supports compact surface-mount construction and automated assembly. Technically, the ICS581G-02 uses a PLL-based architecture to generate the distributed clock outputs. PLL-based distribution can compensate for clock-path phase differences and provide predictable output relationships when the device is switched between operating modes. Because the manufacturer identifies the part as a zero-delay glitch-free clock multiplexer, designers can use it where source selection and output fanout must occur without introducing an intentional cycle delay at the output. Typical uses include processor and FPGA clock distribution, communications-module clock routing, data-converter clock fanout, industrial control systems, and instrumentation requiring several outputs from one timing source. The device is also appropriate where a design needs to select between clock sources without relying on discrete multiplexer and buffer combinations. Placement near the loads can reduce trace-related skew and improve clock distribution across a board. Layout is especially important because a clock device can perform correctly in principle but fail in the assembled PCB if input traces, output loads, and return paths are poorly matched. Keep the clock inputs and outputs over a continuous reference plane, minimize stub branches, place decoupling close to the supply pins, and maintain a symmetric output-routing arrangement. Review the pin-description and layout guidance in the manufacturer datasheet before finalizing fanout and return-path geometry. This product page combines the verified device characteristics, supported ordering variants, application guidance, and comparison criteria to help engineers evaluate the ICS581G-02 for zero-delay clock multiplexing and fanout designs. It also highlights which electrical and pin-level details must be confirmed from the manufacturer datasheet before production release.

RFC Hubungi kami
ICS601G-01 - 156MHz Low-Phase-Noise Clock Multiplier | Renesas
ICS601G-01

ICS601G-01 - 156MHz Low-Phase-Noise Clock Multiplier | Renesas

The Renesas Electronics ICS601G-01 is a low-phase-noise clock multiplier and clock synthesizer operating up to 156 MHz in a 16-pin TSSOP package with a 4.40 mm body width. It is designed for applications that require low phase noise, low jitter, and low clock skew, and it supports multiplication ratios from 1-to-5 according to the manufacturer documentation. The device is identified by DigiKey as a clock/frequency synthesizer IC with one output and a 16-TSSOP package. A clock multiplier is a timing IC that generates an output clock from an input reference and can multiply that reference by a programmed integer ratio. Clock multipliers belong to the clock and timing IC hierarchy alongside phase-locked loops, dividers, buffers, and jitter attenuators. Their purpose is to produce a stable, higher-frequency timing signal while maintaining predictable phase relationships among the source, output, and any clock distribution network. The ICS601G-01 emphasizes phase-noise performance and is described as a low-cost, high-performance clock synthesizer. The same device family is advertised as the lowest-phase-noise multiplier in its original product series and as a low-CMOS-power clock-multiplier option. These characteristics make it relevant to communications, data-conversion, networking, and test-and-measurement systems where clocking noise can propagate into modulation error, conversion accuracy, or timing margins. A 16-TSSOP surface-mount package supports compact PCB layouts and automated assembly. The verified product data identifies a body width of 0.173 inches, equivalent to 4.40 mm. Compared with larger leaded packages, TSSOP reduces board area and shortens interconnect length, although careful layout remains necessary because an oscillator or multiplier can translate supply and reference noise directly into output phase noise. Typical uses include generating a multiplied clock for high-speed serial links, synchronizing parallel data converters, driving low-skew clock trees, and producing a master clock for communications equipment. The device can also serve in clock-generation modules and laboratory instruments where a stable reference frequency must be converted into a higher-rate working clock. When laying out this circuit, keep the reference and output paths short, place decoupling capacitors close to the supply pins, and route sensitive clock traces away from switching nodes. Confirm the supported input range, output ratio programming method, supply voltage, and load drive capability against the current manufacturer datasheet before releasing the layout. This page combines manufacturer-family characteristics with distributor package data, drop-in sourcing variants, practical clock-tree design guidance, and a parameter-by-parameter comparison. Those engineering details help buyers evaluate the ICS601G-01 beyond the basic catalog description and identify the correct package suffix for an existing design.

RFC Hubungi kami
ICS601G-21 - 220MHz Low Phase Noise Clock Multiplier | Renesas
ICS601G-21

ICS601G-21 - 220MHz Low Phase Noise Clock Multiplier | Renesas

The Renesas Electronics ICS601G-21 is a low-phase-noise clock multiplier and clock generator IC designed for applications requiring low jitter, low phase noise, and low-skew fanout. The verified product listing identifies a maximum operating frequency of 220 MHz and a 16-pin TSSOP package with a 4.40 mm body width. The device operates from a 3.0 V to 3.6 V CMOS supply, making it suitable for modern digital systems, processor clocking, communications equipment, and industrial control designs. A clock multiplier is a clock-and-timing IC that generates one or more related output clocks from an input reference. It sits within the broader clock generation and frequency synthesis hierarchy, where clock generator ICs, phase-locked loops, and multipliers provide stable timing references for digital logic, serial links, converters, and communication transceivers. The ICS601G-21 is positioned as a low-cost, low-phase-noise, high-performance multiplier for designs where timing quality is important. The primary performance benefit is clock multiplication with low phase noise. Lower phase noise can reduce timing uncertainty in high-speed digital paths, while low jitter is valuable for clocking oscillators, converters, communication interfaces, and sampling systems. The 220 MHz maximum frequency also allows the multiplier to support demanding clock trees where the input reference operates below the final required output frequency. The 16-TSSOP surface-mount package supports compact PCB layouts and automated manufacturing. The device uses CMOS-compatible signals and a 3.0 V to 3.6 V supply range. These characteristics make it straightforward to pair with modern 3.3 V logic when signal levels, timing margins, and output-drive requirements are compatible. Designers should confirm the input and output frequency ranges, output configuration, clock-edge relationship, and load requirements from the manufacturer datasheet before finalizing a circuit. Typical uses include low-skew clock distribution for embedded processors, frequency generation for communication equipment, clocking in industrial automation systems, and reference-clock multiplication in test and measurement designs. In a fanout arrangement, the multiplier can create related clock outputs that are easier to distribute than attempting to fan out a high-frequency source directly. This approach helps preserve clock quality across multiple loads when the board layout is designed carefully. PCB layout is critical for any low-noise timing circuit. Keep the reference input, multiplier output, supply connections, and decoupling capacitors short, and route clock traces away from high-current switching nodes and noisy digital signals. Provide local supply bypassing and use a controlled ground return path to reduce power-supply noise and crosstalk. The device can be considered for industrial or communications designs, but qualification requirements for automotive, aerospace, or other specialized environments must be confirmed separately. The ICS601G-21 is a compact clock-and-timing solution for designs that need a multiplier with a 220 MHz maximum frequency, CMOS interfaces, and a 16-TSSOP package. Its low phase-noise positioning is useful when the clock source must be multiplied before distribution or when a system requires cleaner timing than a simple divider or general-purpose clock source provides. Final selection should account for the required multiplication ratio, output frequency, jitter, load capacitance, supply voltage, and clock-tree topology.

RFC Hubungi kami
ICS601M-01 - 156MHz Low-Phase-Noise PLL | Renesas
ICS601M-01

ICS601M-01 - 156MHz Low-Phase-Noise PLL | Renesas

Renesas Electronics ICS601M-01 is a single-output CMOS PLL clock synthesizer with a maximum output frequency of 156MHz, designed for low phase noise and low jitter. The device is available in a 16-pin SOIC package measuring 3.90mm wide and uses a 3V to 5.5V supply. Its clock-generation architecture provides a practical frequency multiplication solution for communications, digital signal processing, instrumentation, and other systems requiring a stable, low-noise reference-derived clock. A PLL clock synthesizer is a timing IC that multiplies a lower-frequency reference signal to produce a higher-frequency output while controlling phase noise and jitter. Within the broader clock and timing hierarchy, the ICS601M-01 belongs to the PLL and clock-multiplier family, where it sits between a stable reference source and downstream digital circuits. Its value is particularly evident in designs where directly generating a required clock frequency would otherwise be difficult or where multiplication from an existing reference is more convenient. The manufacturer describes the ICS601-01 family as a low-cost, low-phase-noise, high-performance clock synthesizer intended for applications requiring low phase noise and low jitter. The family is identified as ICS's lowest-phase-noise multiplier and lowest-CMOS part in the original product description. The ICS601M-01 combines a 156MHz maximum output with a 16-pin SOIC footprint, enabling compact implementation on conventional surface-mount PCB layouts. The 16-SOIC package measures 3.90mm in body width and is designed for surface-mount assembly. Operation from a 3V to 5.5V supply supports integration with common low-voltage CMOS logic families. According to the manufacturer datasheet, correct operation requires only 0.01uF and 0.1uF decoupling capacitors connected between VDD and GND and placed as close to the device as practical. Detailed frequency-range, jitter, phase-noise, and output-waveform limits should be taken from the specific manufacturer datasheet revision before release to production. Typical uses include generating a high-frequency processing clock from a lower-frequency oscillator, clocking communications receivers and transmitters, supporting digital signal-processing pipelines, and synthesizing clocks for industrial test equipment. In each case, the principal design question is whether the required output frequency, reference frequency, multiplication ratio, noise performance, and output format remain within the limits of the selected device and operating mode. For PCB implementation, prioritize short return paths and compact decoupling. Place the 0.01uF and 0.1uF capacitors between VDD and GND near the corresponding supply pins, maintain continuous ground reference beneath the device, and route sensitive clock traces away from high-current switching nodes. Avoid long stubs and unnecessary test-point branches on the output because they can increase reflections and degrade timing margin. This product page combines the manufacturer clock-synthesizer description, package information, decoupling guidance, drop-in family options, application guidance, and engineering design notes. It is intended to help engineers identify the correct Renesas ordering suffix, plan a compatible 16-SOIC layout, and evaluate ICS601M-01 for applications where low phase noise, low jitter, and 156MHz maximum clock performance are important.

RFC Hubungi kami
ICS601R-25 - 156MHz 1:5 Clock Multiplier | Renesas
ICS601R-25

ICS601R-25 - 156MHz 1:5 Clock Multiplier | Renesas

Renesas Electronics ICS601R-25 is a CMOS clock multiplier that multiplies an input clock by five, with a listed maximum output frequency of 156 MHz, and is packaged in a 20-pin SSOP. The device is intended for systems requiring low phase noise, low jitter, and low-skew clock distribution. Its one-to-five multiplication ratio allows a comparatively low-frequency reference to drive a higher-frequency clock without requiring a large PLL multiplier ratio. A clock multiplier is a clock-and-timing IC that generates an output clock from an external reference. It belongs to the broader timing-control hierarchy of clock generators, phase-locked loops, frequency synthesizers, and CMOS clock distribution. Unlike a free-running oscillator, the ICS601R-25 requires an external input clock and preserves the relationship between input and output edges, making it useful when an existing system clock must be multiplied while maintaining predictable phase and timing relationships. The ICS601R-25 is identified as a low-cost, low-phase-noise, high-performance clock synthesizer. Its five-times multiplication ratio and 156 MHz maximum output frequency make it suitable for communications, industrial control, consumer electronics, and digital systems that need a distributed clock derived from a stable reference. The low-skew and low-jitter characteristics are particularly relevant when multiple downstream circuits must operate from a common multiplied clock. Because the device uses a multiplier rather than a conventional fractional-N PLL, its design is centered on preserving the incoming reference relationship while producing a higher-frequency output. Power-supply design, output clock routing, and reference-clock stability remain the primary engineering considerations. Short traces, controlled return paths, and appropriate decoupling help prevent supply and trace effects from degrading the clock edge presented to the load. Typical uses include clock generation for communications equipment, digital controllers, data-processing systems, and low-skew fanout networks. The external reference permits the system designer to define timing accuracy and jitter performance primarily through the reference source and interconnect design. This makes the ICS601R-25 appropriate where multiplying an established system clock is preferable to adding another independent oscillator. For PCB implementation, place the decoupling capacitor adjacent to the supply pin and route the reference and output-clock nets away from noisy switching nodes. Preserve a continuous ground reference beneath the clock path, and terminate unused outputs according to the manufacturer's recommendations. Validate output frequency, duty cycle, edge quality, and fanout behavior in the final board environment. This product page combines the manufacturer function description, package information, order-code distinctions, and practical clock-design guidance. It also organizes drop-in comparisons and selection questions around the practical constraints engineers face when replacing or sourcing a 1:5, 156 MHz CMOS clock multiplier.

RFC Hubungi kami
ICS613M - Low Phase Noise Clock Multiplier | Renesas
ICS613M

ICS613M - Low Phase Noise Clock Multiplier | Renesas

The Renesas Electronics ICS613M is a low-cost, low-phase-noise, high-performance clock synthesizer and clock multiplier in a 16-pin SOIC package. It is positioned for applications requiring low phase noise and low jitter, and the manufacturer describes it as the ICS family's lowest-phase-noise multiplier. The ICS613M belongs to the clock synthesizer and PLL frequency-synthesizer segment of the broader clock and timing IC category. A clock multiplier is a timing IC that derives one or more higher-frequency clock outputs from a lower-frequency reference input. By multiplying the reference frequency while preserving low phase noise, this type of device can support clock trees, communication interfaces, digital processing systems, and mixed-signal equipment. In the electronics hierarchy, the ICS613M is a clock synthesizer, then a clock and timing IC, then an integrated circuit and semiconductor. The primary verified feature of the ICS613M is its low phase-noise performance. Low phase noise is important when clock timing jitter can degrade signal integrity, reduce usable timing margin, or increase data-conversion errors. Its low-cost positioning also makes it relevant to designs that require stable frequency generation without selecting a higher-cost premium clock-generation solution. The available technical data does not provide a numerical phase-noise, jitter, frequency, or supply-voltage rating. The ICS613M is identified as the lowest-phase-noise multiplier within the ICS family, indicating that its clock multiplication architecture was optimized specifically for phase-noise-sensitive designs. Clock multiplication can reduce the need for multiple independent oscillators and allows a system to derive related timing signals from a common reference. Designers must still account for loop stability, reference quality, output-load capacitance, and the multiplication ratio required by the target system when evaluating the device. Typical applications include communications infrastructure, digital signal processing platforms, instrumentation, industrial control systems, and clock-tree generation where a common reference must be converted into additional timing domains. The 16-pin SOIC package supports conventional surface-mount PCB assembly and is suitable for designs that do not require a specialized leadless package. Exact frequency, supply, output, and stability limits must be confirmed from the complete manufacturer datasheet before schematic release. The principal design consideration is verification of operating conditions. The visible verified data confirms the device category, low-phase-noise positioning, clock-multiplier function, and 16-pin SOIC package, but it does not expose the electrical tables needed to select compensation, loop, decoupling, or output components. A design should therefore preserve the 16-pin footprint only after checking the complete pin assignment and confirming all required frequency ratios. This product record consolidates verified distributor availability, manufacturer-described clock performance, package information, application guidance, and honest data gaps into one engineering-oriented resource. It also distinguishes confirmed facts from parameters that still require the full Renesas or legacy ICS datasheet, helping teams accelerate sourcing without turning incomplete search results into unsupported design assumptions.

RFC Hubungi kami
ICS613MT - 157.5MHz Low-Phase-Noise Clock Multiplier | Renesas
ICS613MT

ICS613MT - 157.5MHz Low-Phase-Noise Clock Multiplier | Renesas

Renesas ICS613MT is a low-phase-noise clock multiplier and frequency synthesizer with a maximum operating frequency of 157.5MHz. The device accepts clock or crystal inputs, includes a PLL, and provides a CMOS clock output in a 16-SOIC package. Its nominal input-to-output ratio is 2:2, making it suitable for systems that require a multiplied or regenerated clock with low phase noise and low jitter. A clock multiplier is a type of clock and timing integrated circuit that multiplies an input frequency while preserving the required phase relationship between input and output. Clock multipliers and frequency synthesizers form part of the wider clock generation, timing control, and power management hierarchy used to distribute precise timing signals among processors, communication links, converters, and data-conversion systems. The ICS613MT combines a PLL-based architecture with a maximum frequency of 157.5MHz. Its input section supports either a clock or crystal source, while the single CMOS output stage provides a compatible interface for digital timing circuits. The 2:2 ratio provides a straightforward multiplication relationship, reducing the need to redesign the surrounding clock tree when a higher-frequency reference is required. Phase noise and jitter are critical in high-speed digital systems because timing uncertainty limits usable bandwidth, increases communication error margins, and can degrade the effective resolution of converters. The ICS613MT is positioned as a low-cost, low-phase-noise clock synthesizer for applications requiring low phase noise and low jitter. Its single-clock architecture also helps simplify routing and reduces the number of independent timing branches that must be controlled on the PCB. Typical uses include communications infrastructure, clocked data converters, digital signal processing modules, industrial control equipment, and embedded systems that require a deterministic local clock source. The device is also applicable when an existing low-frequency reference must be converted into a higher-frequency timing signal without relying on a more complex frequency synthesizer. The primary design consideration is the relationship between the input source, crystal or clock requirements, and the intended output frequency. PCB layout should preserve a short and controlled path from the timing source to the input pins and from the device to the load. Power-supply decoupling, output fanout, and return-path continuity should be evaluated together because clock edges must remain clean at the receiver. This product overview consolidates the ICS613MT clocking function, package information, key electrical characteristics, design guidance, sourcing information, and the limits of currently documented replacement options. Engineers should use the manufacturer datasheet for final pin assignments, recommended application circuits, operating limits, and timing parameters before releasing a production design.

RFC Hubungi kami
ICS621MI - 1:4 200MHz Low-Skew Clock Buffer | Renesas
ICS621MI

ICS621MI - 1:4 200MHz Low-Skew Clock Buffer | Renesas

Renesas Electronics ICS621MI is a low-skew 1-to-4 clock fanout buffer rated for 200 MHz operation and supplied in an 8-pin SOIC package measuring 0.154 inch, or 3.90 mm, in body width. The device provides one clock input and four buffered clock outputs for distributing a common timing signal across multiple circuit loads. According to the verified manufacturer and distributor information, its operating supply range is 1 V to 1.8 V, while its input is tolerant of 3.3 V signals. This combination allows it to be used in mixed-voltage clock-distribution networks where a lower-voltage core or peripheral must be driven from a higher-voltage clock source. A clock buffer is a digital timing IC that reproduces an input clock onto multiple outputs. It belongs to the clock and timing hierarchy, alongside clock generators, dividers, multiplexers, and phase-shifting circuits, and is used within digital logic and communications equipment. Unlike a PLL-based clock generator, the ICS621MI does not create a new frequency; its purpose is to fan out one source while limiting skew between destinations. That makes it useful when several sequential circuits must receive related clock edges and when added routing distance could otherwise distort arrival timing. The verified headline specifications are a 1:4 fanout ratio, a maximum indicated operating frequency of 200 MHz, a 1 V to 1.8 V supply range, 3.3 V tolerant input, low-skew operation, and an 8-SOIC package. The 3.3 V tolerant input is particularly useful at system interfaces because it permits a 3.3 V-domain clock source to feed the buffer without a separate input translator. The low-voltage 1 V to 1.8 V operating range suits modern high-performance digital cores requiring compact, low-power clock distribution. The primary engineering benefit is the relationship between fanout and timing control. One source clock is distributed to four outputs rather than being connected to four loads directly. The buffer isolates the source from downstream capacitive loading and provides matched output paths intended to reduce output-to-output skew. Because the available verified material does not publish a numeric skew value, input capacitance, output rise or fall time, or propagation-delay tolerance, those characteristics should be obtained from the manufacturer datasheet before relying on a margin in a timing-critical design. Typical applications include high-speed digital logic, processor clock distribution, communications equipment, memory interfaces, and general-purpose fanout of a board-level or module-level clock. In each case, the designer must ensure that the source remains within the specified frequency, power-supply voltage, and input-signal limits. Decoupling close to the supply pins and short, impedance-controlled clock routes are also important because package and board parasitics can affect edge quality even when the nominal fanout and frequency ratings are satisfied. A key design consideration is that pin-compatible does not always mean timing-identical. Before substituting another fanout buffer, verify package dimensions, input and output pin positions, supply range, output-drive capability, propagation delay, output skew, operating temperature, and the definition of the enable or output-control behavior. These checks are especially important when the replacement operates from a different voltage range or has different edge-rate characteristics. This page combines the verified distributor data, package information, interface capabilities, and application guidance into a focused engineering reference for the ICS621MI.

RFC Hubungi kami
ICS621MIT - 1:4 200MHz Clock Buffer | Renesas Electronics
ICS621MIT

ICS621MIT - 1:4 200MHz Clock Buffer | Renesas Electronics

Renesas Electronics ICS621MIT is a low-skew 1-to-4 clock buffer operating up to 200 MHz in an 8-SOIC package. It accepts one clock input and provides four buffered clock outputs, allowing a single low-frequency source to drive multiple timing-critical loads while reducing fanout loading. The 8-SOIC package is a surface-mount option for compact digital, communications, networking, and test equipment designs. A clock buffer is a digital timing IC that reproduces a clock signal through one or more output stages. Clock buffers and clock drivers belong to the broader clock and timing IC category, where their practical role is to isolate a source from capacitive loading, extend signal reach, and distribute a common timing reference. In a multi-load system, a buffer helps each receiver see a cleaner transition sequence than it would when connected directly to a long or heavily loaded clock trace. The principal characteristics of ICS621MIT are its 1:4 fanout ratio, 200 MHz maximum clock frequency, low-skew architecture, and 8-SOIC package. A 1:4 ratio means that one incoming clock can feed four output branches, reducing the number of separate distribution stages required in a moderate-complexity system. The 200 MHz operating capability makes the device relevant to designs carrying clock signals in the hundreds-of-megahertz range, subject to the complete electrical limits and layout guidance in the manufacturer datasheet. Because the ICS621MIT performs digital fanout rather than voltage conversion, its signal path is intended to preserve clock timing relationships across the four outputs. Low skew is particularly relevant when multiple receivers must operate from the same edge, including parallel data converters, sequential logic, communications equipment, and automated test systems. The exact propagation-delay, output-impedance, rise-time, fall-time, supply-voltage, and temperature limits should be taken directly from the 621 datasheet before final timing and power-budget calculations. Typical uses include clock distribution for communication equipment, fanout in network interfaces, test-and-measurement systems, and synchronization among multiple digital subsystems. It can also serve as an interface between a central clock source and several low-to-moderate-capacitance loads when the board requires a dedicated fanout stage. Its eight-pin package also keeps the footprint compact while exposing one input, four outputs, power connections, and ground in a conventional small-outline arrangement. Layout should prioritize short clock traces, a continuous ground reference, and placement of the device near the clock source or the group of receivers it serves. Avoid routing sensitive clock nets beneath unrelated noisy circuitry, and terminate or control unused outputs according to the manufacturer's guidance. Validate timing at the intended frequency, load capacitance, supply voltage, temperature, and process corner because fanout buffers can change edge rate and edge-to-edge alignment as loading changes. This product page combines the core device identity, verified manufacturer documentation, a same-package replacement candidate, application-oriented engineering guidance, and a structured comparison of the information needed for clock-tree design. It is intended to help engineers identify whether the 1:4, 200 MHz ICS621MIT architecture fits a board before undertaking detailed datasheet verification and board-level qualification.

RFC Hubungi kami
ICS650G-36 25MHz PCI Clock Generator | Renesas
ICS650G-36

ICS650G-36 25MHz PCI Clock Generator | Renesas

Renesas Electronics ICS650G-36 is a low-cost PCI and networking clock generator with one 25 MHz crystal input and four CMOS clock outputs. It uses analog/digital phase-locked-loop techniques to support LAN, PCI, and 100M SDRAM clock requirements. The device supports PLL bypass operation and is packaged in a 16-pin TSSOP. A clock generator is a timing IC that creates one or more deterministic clock signals for digital systems. Clock and timing ICs sit within the broader semiconductor hierarchy and distribute reference frequencies to processors, memory, network controllers, and bus interfaces. The ICS650G-36 accepts either a crystal or clock input, locks the internal PLL to that reference, and supplies four related output clocks. This arrangement allows one reference source to support several legacy computing and networking clock domains. Key features include a maximum frequency of 25 MHz, one clock circuit, a 1:4 input-to-output ratio, CMOS outputs, and PLL operation with bypass capability. The PLL multiplier allows a 25 MHz fundamental-mode crystal reference to produce four output clocks. Bypass functionality is useful during startup, test, or configurations where direct reference-clock distribution is preferable. The 16-pin TSSOP package supports conventional surface-mount PCB assembly. Internally, the ICS650G-36 combines analog and digital phase-locked-loop techniques with a standard fundamental-mode crystal input. Its architecture is intended to provide multiple clocks from one inexpensive reference while supporting the clocking requirements associated with LAN, PCI, and 100M SDRAM systems. Exact acquisition behavior, output-frequency configuration, voltage limits, and jitter characteristics should be confirmed in the manufacturer datasheet before layout release. Typical applications include legacy PCI peripheral boards, networking equipment, 100M SDRAM memory interfaces, Ethernet controllers, and embedded systems requiring multiple synchronized clock outputs. The four-output arrangement reduces the number of separate oscillators and clock distribution components required on a board. It is particularly relevant to designs based on older PCI and 100M SDRAM architectures rather than modern high-speed server clocking requirements. For implementation, follow the reference circuit and pin-connection details in the manufacturer datasheet, especially for the crystal or external-clock input and unused outputs. Confirm the bypass configuration and output routing for each target bus. PCB signal-integrity practices should include short clock traces, continuous reference planes, and deliberate return paths; CMOS clock outputs also require suitable termination for the selected trace impedance. This product page combines the manufacturer’s application description with verified device attributes, ordering-variant references, a parameter comparison, and practical implementation guidance. It also identifies where additional electrical, environmental, lifecycle, and pin-level information must be checked before production release.

RFC Hubungi kami
ICS650G-40 Ethernet Switch Clock Source | Integrated Circuit Systems
ICS650G-40

ICS650G-40 Ethernet Switch Clock Source | Integrated Circuit Systems

The Integrated Circuit Systems ICS650G-40 is a clock synthesizer and Ethernet switch clock source with a PLL, crystal or clock input, and clock output. It accepts a 25 MHz crystal input and generates selectable output clock frequencies for Ethernet switch designs. The device is associated with a 1:3 input-to-output ratio, one PLL circuit, and a maximum listed input frequency of 25 MHz. A clock synthesizer is a type of frequency-generation IC used to derive stable timing signals from a common reference. Within the product hierarchy, the ICS650G-40 belongs to the clock and timing IC family, which sits within interface and network-clocking systems. Ethernet switches require multiple related clocks for transceiver interfaces, switching logic, packet processing, and system management. A programmable clock source allows one reference oscillator to support several clock domains while reducing the number of discrete timing components. The principal feature of the ICS650G-40 is its phase-locked-loop architecture. The PLL can divide or multiply the input reference to produce the output frequencies selected through the device's output-select interface. Its 25 MHz reference input provides a common timing foundation for Ethernet switch clock trees. The 1:3 ratio associated with related ICS650G-40 variants provides a useful implementation option when the required system clock is three times the reference frequency. This clock source is intended specifically for Ethernet switch applications rather than general-purpose timing distribution. Its integrated PLL can reduce the number of separate dividers and oscillators needed around a switching ASIC. The 16-TSSOP package identified for related ICS650G-40A variants also reflects a compact surface-mount format appropriate for communications equipment, although engineers should verify the exact land pattern and pin assignment for the ordering code being placed on the PCB. Typical uses include core-clock generation for Ethernet switching silicon, clock-tree support in network interface cards, and timing generation in managed or unmanaged switching platforms. The device can be especially useful where several subsystems must operate from one 25 MHz crystal reference while requiring selectable output-clock options. PCB design should preserve short, clean clock traces and provide a stable reference source with appropriate grounding. Keep sensitive oscillator and PLL traces away from high-current switching nodes, and use the manufacturer pin-description table to assign every signal correctly. Confirm output frequency, enable behavior, supply requirements, and load capability against the datasheet before releasing a production layout. This product page combines the Ethernet clock-source function, PLL characteristics, package considerations, application guidance, and substitution constraints into an engineering-focused guide. It also distinguishes verified drop-in candidates from suffix-only ordering options that should not be assumed to be interchangeable without package and pin verification.

RFC Hubungi kami