Produk (44,000+)

ICS527R-01 - 160 MHz Zero-Delay Clock Slicer | Renesas
ICS527R-01

ICS527R-01 - 160 MHz Zero-Delay Clock Slicer | Renesas

The Renesas Electronics ICS527R-01 is a user-configurable zero-delay clock buffer and clock slicer with a 160 MHz operating frequency in a 28-SSOP package measuring 3.90 mm wide. It distributes a source clock across multiple outputs with matched propagation characteristics while allowing the user to generate multiplied or divided output-clock relationships from the input frequency. A clock slicer is a specialized timing integrated circuit that belongs to the clock and timing IC family, alongside clock buffers, generators, phase-locked loops, and frequency synthesizers. Its purpose is to control the relationship between an input clock and its outputs so that downstream circuits receive coherent, predictable timing references. The zero-delay architecture minimizes added latency between the source and fanout outputs, which is important when several subsystems must operate from the same clock domain. Key characteristics of the ICS527R-01 include a 160 MHz maximum clock frequency, a 28-SSOP package, zero-delay fanout operation, and user-programmable clock multiplication or division capabilities. The device is suited to systems that require more than one usable clock output without introducing uncontrolled skew between receiving circuits. Its configuration flexibility allows a single clocking component to serve systems whose operating modes require different output-clock relationships. The ICS527R-01 combines clock distribution with programmable ratio generation. Instead of cascading a separate divider or multiplier after a fanout buffer, the system can derive the required output relationships from one package. This reduces circuit count and keeps the clock-generation structure compact. Exact control-pin states, output ratios, supply voltage, and operating-temperature limits should be confirmed in the Renesas 527-01 datasheet before the device is placed in a new design. Typical uses include processor and peripheral clock distribution, telecommunications line-card timing, data-acquisition systems, test and measurement equipment, and industrial control modules. In a multi-channel data-conversion system, a common sliced clock can feed converters that must launch data against a shared time reference. In a telecommunications design, the fanout outputs can support separate transmit, receive, and processing sections that must remain synchronized. When laying out the PCB, keep clock traces short, use controlled-impedance routing where required, and avoid routing sensitive clock nets beside high-current switching nodes. Follow the package pin arrangement and recommended decoupling configuration in the manufacturer datasheet. Validate output ratio settings and startup behavior in hardware because incorrect control sequencing or an unsuitable input clock can produce invalid timing at downstream circuits. This page combines the verified product identity, package information, family-level functions, drop-in replacement options, application guidance, and engineering design notes in one engineering-focused reference.

RFC Hubungi kami
ICS527R-02 - 160MHz Zero-Delay Clock Slicer | Renesas
ICS527R-02

ICS527R-02 - 160MHz Zero-Delay Clock Slicer | Renesas

The Renesas Electronics ICS527R-02 is a user-configurable clock slicer and zero-delay buffer with a maximum frequency of 160 MHz, one PECL input, and CMOS clock outputs, housed in a 28-SSOP package. It aligns the rising edges of PECLIN and FBIN according to divider ratios programmed by external reference and feedback components, allowing nearly any related output frequency to be generated from a PECL source clock. A clock slicer is a specialized timing IC that divides and recombines clock signals to provide adjustable phase relationships. Clock slicers sit within the clock and timing hierarchy as clock buffers and fanout devices, where low skew and predictable edge alignment are more important than simply regenerating a clock. The ICS527-02 family uses a PLL-based architecture to create zero-skew PECL-to-CMOS clocking relationships for communications, processor, and data-conversion systems. The ICS527R-02 supports a maximum operating frequency of 160 MHz and has one clock circuit. Its user-configurable reference and feedback dividers allow multiplication or division of the input clock, while the zero-delay architecture minimizes the skew between the relevant rising edges. PECL input support is useful in high-speed telecommunications and industrial clocking systems where the source clock is already distributed using ECL-family logic levels. Operationally, the device accepts a PECL reference clock and returns related CMOS clock outputs. The two CMOS outputs support fanout and clock distribution, reducing the need for separate logic buffers when several domains require the same derived timing signal. Zero-delay operation is intended for systems in which source and feedback clocks must be phase-aligned with very little edge displacement. Typical uses include telecom line-card clocking, data-converter clock generation, processor reference-clock distribution, network-interface timing, and industrial control systems. The 160 MHz ceiling makes the ICS527R-02 most appropriate for designs operating below that limit, while the 28-SSOP package supports compact, surface-mounted assemblies. PCB implementation requires careful treatment of high-speed clock inputs and outputs. Keep PECL traces short, provide a continuous reference plane, avoid stubs, and place termination and decoupling components close to the device. Confirm input/output timing, divider ratios, and supply sequencing against the manufacturer datasheet before releasing production artwork. This product page combines the manufacturer function description with package, frequency, interface, and architecture details, then adds application guidance, drop-in replacement limits, comparison parameters, and practical layout considerations. These engineering-oriented notes help distinguish a true PCB-compatible replacement from a merely similar clock-buffer product.

RFC Hubungi kami
ICS527R-03 - 160MHz Zero-Delay Clock Buffer | Renesas
ICS527R-03

ICS527R-03 - 160MHz Zero-Delay Clock Buffer | Renesas

Renesas Electronics ICS527R-03 is a 160 MHz zero-delay clock buffer and clock-distribution device packaged in a 28-SSOP surface-mount package. It is designed to reproduce an input clock through a low-latency buffer path and distribute that clock to downstream digital circuitry. The device is associated with user-configurable PECL input operation, while its low-voltage supply range is identified as 3.15 V to 3.45 V. The exact output configuration, skew, propagation delay, and input-referred noise are not stated in the available manufacturer listing. A zero-delay buffer is a clock-buffer IC that offers a very small propagation delay while providing buffering between a clock source and one or more receiving circuits. Clock buffers help isolate the source from downstream loading, reproduce the clock waveform with controlled edge relationships, and simplify distribution across multiple digital blocks. In the broader hierarchy, ICS527R-03 belongs to the clock and timing IC family, which includes clock buffers, clock slicers, clock generators, phase-locked loops, and frequency synthesizers. The main published specifications identify a maximum operating frequency of 160 MHz and use of a 28-SSOP package measuring 0.154 inch, or 3.90 mm, in width. The 3.15 V to 3.45 V operating-supply range supports low-voltage clocking systems. ICS527R-03 is also described as a fanout or distribution buffer with zero delay, a zero-skew clock-slicing function, and user-configurable PECL input behavior. These characteristics make the device relevant to processors, network interfaces, serializer or deserializer chains, test equipment, and other systems requiring a locally buffered clock. Clock integrity depends on preserving edge amplitude, rise and fall times, duty cycle, and inter-output timing relationships. A zero-delay architecture is valuable when one source must feed several destinations without allowing receiver input capacitance or board loading to disturb the original clock source. The available listing identifies one output in its abbreviated product description, but it does not expose the complete pin table, input configuration fields, output-enable logic, or detailed timing limits. Those details should be taken directly from the Renesas 527-03 datasheet before schematic capture. Typical uses include buffering a reference clock into a digital ASIC, distributing a communications clock between parallel processing sections, and regenerating a PECL-compatible clock within high-speed test and measurement systems. Because the ICS527R-03 operates from a narrow 3.3 V-class supply range, the input logic levels and downstream supply voltages must be compatible. Short, impedance-controlled clock traces and solid ground-plane return paths are important when preserving the 160 MHz operating capability. Designers should reserve the pins shown as control or configuration inputs for their required levels rather than treating unused clock-buffer pins as arbitrary no-connect locations. Termination, biasing, and decoupling depend on the selected PECL input configuration and the particular clock topology. The 28-SSOP footprint requires careful assembly planning because the fine-pitch package has a 3.90 mm body width and may be difficult to rework manually. This product page consolidates the exact package, frequency, voltage, lifecycle, and sourcing information visible for ICS527R-03 with application guidance, comparison considerations, and practical clock-layout notes. It also distinguishes the device from related 527-series variants and explains which electrical and pin-level details engineers must confirm in the manufacturer datasheet before releasing a production design.

RFC Hubungi kami
ICS527R-04 - 160MHz CMOS PLL Clock Driver | Renesas
ICS527R-04

ICS527R-04 - 160MHz CMOS PLL Clock Driver | Renesas

The Renesas Electronics ICS527R-04 is a user-configurable PECL-input, zero-delay-buffer clock driver based on a CMOS phase-locked loop, with a maximum operating frequency of 160 MHz. The device is associated with a 28-pin SSOP package and operates across a commercial temperature range of 0°C to 70°C. It belongs to the clock and timing hierarchy: PLL-based clock driver → clock buffer → clock and timing IC → semiconductor. A PLL-based clock driver is an integrated timing device that locks an output clock to a reference and distributes that clock through configurable logic paths. The user-configurable architecture allows a design to select the division ratio and output behavior required by the receiving circuitry. In a zero-delay-buffer configuration, the device minimizes propagation delay between the driving source and downstream clock loads while preserving a defined relationship between input and output edges. The ICS527R-04 supports a maximum frequency of 160 MHz, making it applicable to clock-generation and distribution systems operating below that limit. Its PECL input interface is intended for systems using positive emitter-coupled logic clock sources. The CMOS PLL implementation and configurable outputs provide the basis for translating a reference clock into multiple synchronized signals needed by digital logic, communications equipment, and test systems. A principal design consideration is the relationship between input frequency, selected feedback ratio, output division, and the resulting operating point. The manufacturer datasheet should be used to confirm supported configuration combinations, output-edge relationships, supply requirements, and the treatment of unused inputs or outputs before the device is placed into production. PCB implementation must preserve the pin assignments and decoupling recommendations associated with the SSOP-28 footprint. Typical uses include PECL-to-logic clock distribution, frequency multiplication or division within a PLL architecture, and generation of related clocks for digital subsystems. The device can also be used in communications equipment and test platforms where multiple outputs must remain synchronized. Its 0°C to 70°C commercial operating range is appropriate for indoor commercial and industrial equipment that does not require extended-temperature operation. Engineers should verify absolute maximum ratings, recommended operating conditions, AC timing, output-drive capability, and power consumption against the manufacturer datasheet before final schematic or layout release. The SSOP-28 package provides a high pin count relative to its body size, so careful routing and stable supply decoupling are particularly important. This page organizes the documented operating limits, package information, sourcing questions, and design considerations for ICS527R-04. It also distinguishes verified device facts from parameters that still require confirmation before a replacement or new design can be released.

RFC Hubungi kami
ICS542M - 156 MHz 1:2 Clock Divider | Renesas | SOIC-8
ICS542M

ICS542M - 156 MHz 1:2 Clock Divider | Renesas | SOIC-8

The Renesas Electronics ICS542M is a clock fanout buffer and programmable divider IC with a maximum input frequency of 156 MHz, supplied in an 8-pin SOIC package. It accepts a CMOS clock and provides divided outputs using selectable divide ratios of 2, 4, 6, 8, 12, or 16. Its 3 V to 5.5 V operating-supply range supports both 3.3 V and 5 V systems, while the 1:2 distribution function provides two clock outputs from one source. A clock divider is a timing IC that derives one or more lower-frequency or phase-related clock signals from an input reference. Within the broader clock and timing hierarchy, the ICS542M belongs to the clock-buffer, clock-distribution, and clock-divider category. This functionality is useful when a subsystem needs a divided reference clock, multiple outputs for parallel logic, or a lower-frequency signal generated without adding a separate oscillator and PLL. Key verified specifications include a maximum frequency of 156 MHz, a 1:2 output configuration, CMOS inputs, CMOS three-state outputs, and a 3 V to 5.5 V supply range. The listed divider ratios permit useful choices for digital clocking, data converters, communications modules, and embedded systems. The package designation is 8-SOIC with a stated width of 0.154 inches, or 3.90 mm. The ICS542M combines clock division and distribution in one device. The divide control selects the relationship between the input clock and the generated outputs, while the fanout section supports distribution to two destinations. This integration can reduce the number of separate timing components required when only one of the available divide ratios is needed. Because the verified product information does not include detailed propagation-delay, output-duty-cycle, rise-time, fall-time, or jitter values, those characteristics should be checked in the current Renesas datasheet before high-speed timing closure. Typical uses include clock distribution for digital logic, generating a divided reference for data-acquisition systems, supporting communications equipment, and producing deterministic clocks in embedded control platforms. The 156 MHz ceiling accommodates demanding CMOS clock trees, but actual system operation must account for supply voltage, temperature, load capacitance, and the selected divider ratio. For layout, place the device close to the clock source and receiving circuits to minimize trace length and propagation-delay variation. Keep output traces short, provide the decoupling specified by the manufacturer datasheet, and use controlled-impedance routing when outputs drive longer PCB traces. Verify unused-output state, enable or three-state behavior, and rise/fall-time requirements in the system timing budget. This page consolidates the verified Renesas and distributor information, lifecycle evidence, practical clock-tree design guidance, and a transparent comparison of parameter gaps. It also distinguishes confirmed electrical facts from unverified details rather than inferring missing timing values or assuming drop-in alternatives where the supplied cross-reference data does not prove compatibility.

RFC Hubungi kami
ICS542MI - 156 MHz 1:2 Clock Buffer | Renesas Electronics
ICS542MI

ICS542MI - 156 MHz 1:2 Clock Buffer | Renesas Electronics

Renesas Electronics ICS542MI is a CMOS clock fanout buffer and divider IC that accepts a clock input up to 156 MHz and produces two clock outputs with divide ratios selected from 2, 4, 6, 8, 12, or 16. The device operates from 3 V to 5.5 V and is supplied in an 8-pin SOIC package measuring 3.90 mm in width. According to the Renesas Electronics 542 datasheet, one output is a low-skew divide-by-two version of the other output. A clock fanout buffer is a timing-device category used to distribute one periodic signal to multiple circuit loads. Clock buffers, sometimes called clock drivers, reproduce a clock with controlled loading, skew, and output characteristics. The ICS542MI combines clock distribution with programmable division, placing it in the hierarchy of clock and timing IC, clock buffer, clock divider, and timing-control semiconductor. The verified operating limit of 156 MHz supports high-speed digital logic, processor interfaces, communications equipment, and clock-tree distribution. Its 3 V to 5.5 V supply range allows use in both 3.3 V and 5 V systems, while CMOS inputs and three-state CMOS outputs support integration with digital clock domains. The exact divider-selection truth table and enable behavior should be verified against the manufacturer datasheet before implementation. Renesas describes the ICS542 as a cost-effective way to generate a high-quality divided clock output. One output provides the selected divided frequency, while the other is described as a low-skew divide-by-two output relative to that clock. This arrangement can reduce fanout loading and provide two related clocks to different downstream circuits without requiring multiple separate divider packages. Typical uses include fanout for digital logic, local clock distribution in communication systems, generation of related clocks for data converters or processors, and systems that need a divided clock alongside a further divided low-skew clock. The 8-SOIC package also makes the ICS542MI suitable for conventional surface-mount PCB layouts where a larger leaded package would be unnecessary. Designers should use short, impedance-controlled clock traces, provide a clean reference clock, and confirm output-state and division-selection requirements from the datasheet. Because the verified snippets do not provide detailed rise time, output impedance, skew, current, temperature, or pin-level thresholds, those values must not be inferred from the frequency and supply limits. This page distinguishes verified specifications from parameters that require confirmation from the manufacturer datasheet.

RFC Hubungi kami
ICS542MIT - 1:2 156 MHz Clock Fanout Buffer | Renesas
ICS542MIT

ICS542MIT - 1:2 156 MHz Clock Fanout Buffer | Renesas

Renesas Electronics ICS542MIT is a clock fanout buffer and divider integrated circuit with a 1:2 division ratio, a maximum operating frequency of 156 MHz, and an 8-SOIC package measuring 3.90 mm in width. It accepts a CMOS clock input and provides two three-state CMOS outputs, making it suitable for distributing a divided clock to multiple digital loads. A clock fanout buffer is a clock and timing IC that reproduces or distributes a clock signal while controlling impedance, loading, and signal timing. The ICS542MIT belongs to the broader clock buffer and driver hierarchy, where clock distribution devices isolate a source from downstream capacitance and provide predictable edge propagation into logic circuits. Its 3 V to 5.5 V supply range allows operation across common low-voltage digital systems. The device combines a 1:2 divider function with clock fanout capability. Its three-state CMOS outputs can place individual outputs into a high-impedance state when the receiving circuitry does not need a clock, while the 156 MHz maximum frequency supports common communications, control, and digital-logic clock domains. The 8-SOIC package is suitable for conventional surface-mount PCB assembly and offers a practical upgrade path for designs requiring more than a direct clock connection. Clock distribution requires careful attention to edge rate, output loading, return path continuity, and trace length. The three-state outputs make output-enable control relevant to system power management and bus segmentation. Because the ICS542MIT divides the input clock, downstream logic should be evaluated against the divided output frequency rather than assuming the source frequency appears unchanged at the receiver. Typical applications include communication equipment, control systems, test and measurement products, and general-purpose digital platforms that require one input clock to feed two destinations. The device is particularly useful where one subsystem needs a divided clock or where multiple clock domains must receive independently controlled outputs. Its 156 MHz ceiling also makes it applicable to systems operating below that frequency without requiring a higher-speed clock distribution architecture. When laying out the circuit, keep clock traces short, provide a continuous ground reference, and place decoupling close to the supply pins. Treat output-enable and input-clock timing as part of the system-level timing budget, especially when the buffer feeds a counter, latch, or communications transceiver. Confirm all timing, output-enable, and propagation-delay requirements against the manufacturer datasheet before release. This product page consolidates the confirmed ICS542MIT electrical and packaging details, practical clock-distribution guidance, a strict drop-in cross-reference, and design considerations that help engineers evaluate the device before schematic capture and PCB layout.

RFC Hubungi kami
ICS542MT - 1:2 Clock Buffer, 156 MHz, 8-SOIC | Renesas
ICS542MT

ICS542MT - 1:2 Clock Buffer, 156 MHz, 8-SOIC | Renesas

The Renesas ICS542MT is a clock fanout buffer and divider IC that accepts a CMOS clock input up to 156 MHz and provides a 1:2 divided clock output with three-state CMOS outputs. It operates from a 3 V to 5.5 V supply and is packaged in an 8-SOIC package measuring 0.154 inch wide and 3.90 mm in length. The ICS542MT is designed for clock distribution, frequency division, and systems where a stable divided clock is required from a higher-frequency source. A clock buffer or clock divider is a timing IC that conditions, distributes, or divides a digital clock signal. In the clock and timing hierarchy, the ICS542MT belongs to the clock buffer and divider family, which supports phase-locked-loop (PLL) based timing architectures, communications equipment, and digital processing systems. A divide-by-two function can reduce the output frequency while preserving a defined relationship to the input clock, while the three-state output structure allows the output to be disabled when it is not needed. The verified device information identifies a maximum frequency of 156 MHz, a 1:2 divide ratio, CMOS input and output signaling, and a 3 V to 5.5 V operating supply range. The manufacturer’s ICS542MT documentation describes the device as a cost-effective way to produce a quality clock output divided from a clock input. This combination makes it suitable for clock generation, timing distribution, and intermediate frequency conversion stages in communication and digital electronics. Because the ICS542MT uses proprietary PLL techniques to produce the divided clock, PCB layout and supply decoupling should be treated as part of the timing design rather than added afterward. Keep the clock input and output traces short, provide a clean ground reference, and place bypass capacitors close to the supply pins. When replacing the part, verify that the alternative has the same SOIC-8 footprint, pin assignments, input/output logic levels, and divide behavior; a similar frequency rating alone does not guarantee drop-in compatibility. Typical application areas include communications and networking clock trees, frequency conversion after an upstream oscillator or PLL, and digital subsystems requiring a locally divided clock. The page combines verified manufacturer and distributor information with practical selection guidance, application notes, and drop-in alternative analysis to help engineers evaluate ICS542MT designs faster.

RFC Hubungi kami
ICS548G-05 - Low-Jitter PLL Clock Synthesizer | Renesas
ICS548G-05

ICS548G-05 - Low-Jitter PLL Clock Synthesizer | Renesas

Renesas Electronics ICS548G-05 is a low-cost, low-jitter PLL clock synthesizer designed to generate x16 and x24 clocks from T1 and E1 reference frequencies, with a listed output frequency of 49.152 MHz and operation from 3.15 V to 5.5 V. The device is packaged in a surface-mount 16-pin TSSOP with a 4.40 mm body width. It is intended for communications timing, audio sampling-rate generation, and clock-distribution designs requiring multiple related outputs from one reference. A PLL clock synthesizer is a clock-and-timing integrated circuit that multiplies or divides a reference signal and then distributes the resulting clock through dedicated output drivers. Within the product hierarchy, the ICS548G-05 is a clock synthesizer and frequency multiplier, a member of the broader PLL and clock-management IC category, and ultimately part of the semiconductor timing-control ecosystem. Its low-jitter design makes it useful where the synthesized clock must support timing-sensitive digital or communications functions. Key features include a 16-pin TSSOP package, a 3.15 V to 5.5 V supply range, and synthesis of x16 and x24 clocks from T1 and E1 frequencies. The manufacturer describes the ICS548-05 as a low-cost, high-performance clock synthesizer using patented analog/digital PLL techniques. It accepts a crystal or clock input and generates popular communications frequencies, allowing multiple related clock outputs to replace separate oscillator arrangements. The listed 49.152 MHz output is directly associated with audio-clock and sampling-rate use cases. The PLL architecture separates frequency generation from the external reference source. A crystal or clock input establishes the reference, while the internal synthesizer produces the required derived clock frequencies. Output drivers then provide CLK and related divided or multiplied clock signals. Publicly indexed descriptions also identify CLK and CLK/2 outputs, tri-state capability, and low-skew clock distribution, making the device relevant to designs that need multiple synchronized signals rather than a simple single-ended oscillator. Typical uses include MP3 and digital-audio systems, communications equipment operating around T1 and E1 timing, and clock trees for digital signal processors, converters, and interface logic. The 16-TSSOP format supports compact surface-mount assemblies while exposing reference, power, control, and clock-output functions. In a typical circuit, the reference source and required decoupling capacitors are placed close to the device, while each clock trace is routed to minimize loading and preserve edge quality. Design attention should center on reference stability, correct mode selection, output loading, and power sequencing. Because PLL jitter and phase error depend on the reference source and loop operating conditions, the crystal or external clock must meet the timing requirements stated in the manufacturer datasheet. Keep clock traces short, avoid unnecessary stubs, and use controlled-impedance routing when the output drives longer PCB paths. Confirm all supply, ground, and output connections against the package pin-description table before layout release. This product page combines the manufacturer's device description with practical clock-tree guidance, drop-in option analysis, and application-oriented design context. It helps engineers distinguish the ICS548G-05 from ordinary fixed-frequency oscillators and generic dividers by focusing on its PLL-based synthesis, x16 and x24 multiplication functions, low-jitter communications-clock role, and compact 16-TSSOP implementation.

RFC Hubungi kami
ICS551M - 1:4 160MHz CMOS Clock Buffer | Renesas
ICS551M

ICS551M - 1:4 160MHz CMOS Clock Buffer | Renesas

The Renesas Electronics ICS551M is a 1:4 CMOS clock fanout buffer with a 160 MHz maximum operating frequency and a 3 V to 5.5 V supply range, housed in an 8-pin SOIC package. Designed as a low-cost, high-speed clock distribution device, it accepts one CMOS clock input and provides four buffered CMOS outputs, making it suitable for clock fanout in compact digital systems. A clock fanout buffer is a clock-and-timing integrated circuit that distributes one incoming clock signal to multiple downstream loads. Its place in the hierarchy is clock buffer → clock fanout buffer → clock distribution IC → timing and logic semiconductor. The ICS551M helps isolate clock loads from one another, reduces loading on the source clock, and provides separate outputs for multiple sequential or peripheral circuits. This is especially useful when a single oscillator or clock source must feed several logic blocks. Key verified characteristics include a 1:4 fanout ratio, 160 MHz maximum frequency, CMOS input and output technology, and an operating supply range of 3 V to 5.5 V. The 8-SOIC package measures 0.154 inches, or 3.90 mm, in width according to distributor data. These specifications make the device appropriate for general-purpose clock distribution where a compact surface-mount package and moderate operating frequency are sufficient. The ICS551M belongs to the ICS ClockBlocks family and is identified by distributor listings as a low-cost, small clock buffer. Because its outputs are CMOS, the downstream circuits must be compatible with the selected supply voltage and input thresholds. The device is not a PLL, oscillator, or level shifter; its function is specifically clock replication and distribution. Designers should preserve the input and output timing relationship, maintain the required supply decoupling, and account for trace and load differences among the four outputs. Typical applications include clock distribution in embedded control systems, digital logic networks, communications equipment, test and measurement systems, and general-purpose processor or peripheral clocking. For a design that needs more independent clock domains, frequency generation, or differential clock outputs, a different clock-and-timing device may be more appropriate. For applications requiring only one input and four CMOS copies, the ICS551M provides a straightforward distribution function in an established 8-SOIC footprint. The main design consideration is ensuring that every connected load, trace, and voltage domain is compatible with the available 160 MHz clock. Check rise and fall-time requirements, fanout loading, power-supply noise sensitivity, and the clock-source timing margin before production release. This page synthesizes verified distributor specifications, sourcing links, package information, and engineering guidance while leaving unverified values explicitly unresolved. The ICS551M datasheet and application information should be consulted for complete pin functions, electrical limits, timing characteristics, and recommended circuit implementation. Distributor data confirms the core identity and major specifications, but it does not provide enough evidence here to infer undocumented timing, current, or package dimensions.

RFC Hubungi kami
ICS551MI - 1:4 160MHz CMOS Clock Buffer | Renesas
ICS551MI

ICS551MI - 1:4 160MHz CMOS Clock Buffer | Renesas

The Renesas Electronics ICS551MI is a low-cost, high-speed 1-input to 4-output CMOS clock fanout buffer rated up to 160 MHz, supplied in an 8-SOIC package. Its principal specifications are a 3 V to 5.5 V supply range, CMOS input and output interfaces, four buffered outputs, and a maximum operating frequency of 160 MHz. The device belongs to the clock and timing IC category and is designed for distributing one clock signal across several digital loads without requiring the source device to drive all loads directly. A clock fanout buffer is a digital timing component that reproduces an input clock at multiple outputs. It sits between a clock source and the circuits requiring that reference, reducing fanout loading and helping isolate each destination from the others. The ICS551MI is specifically described as a low-cost, small clock buffer and is part of the ICS ClockBlocks product family. Its 1:4 topology gives a designer four available clock destinations from one source. The verified feature set emphasizes simplicity rather than advanced configuration. The ICS551MI accepts CMOS logic, produces CMOS outputs, operates from 3 V to 5.5 V, and supports frequencies through 160 MHz. It is not presented as a programmable, differential, low-power, or phase-aligned clock-device family member. That makes it suitable where a conventional single-ended clock must be distributed to multiple conventional CMOS loads. The 8-SOIC package provides a compact surface-mount footprint and exposes the input, outputs, supply, and ground connections needed for a conventional fanout implementation. Its operating characteristics allow operation in both 3.3 V and 5 V system contexts within the stated 3 V to 5.5 V supply range. Designers should still confirm timing, output loading, and temperature requirements against the complete manufacturer datasheet before production release because those detailed values are not present in the retrieved source excerpts. Typical uses include distributing a processor or controller clock to communications logic, digital peripherals, counters, or data-conversion subsystems. In a four-output arrangement, the buffer can feed multiple loads while reducing the electrical burden on the original clock source. Because the outputs are not specified as independently selectable or phase-aligned in the retrieved data, the design should treat them as a conventional fanout network rather than a deterministic multi-clock generator. The primary design consideration is to place the clock buffer close enough to the receiving circuits to limit trace loss and maintain signal integrity. PCB routing should preserve a consistent ground reference, avoid long unterminated stubs, and account for the capacitive loading introduced by each connected output. Supply decoupling and output loading should be verified against the full datasheet and the worst-case clock topology used in the final board. This page consolidates the verified distributor specifications, package information, sourcing links, practical clock-distribution guidance, and honestly identifies missing electrical details. It is intended to help engineers locate the ICS551MI datasheet, compare it with related clock devices, and determine whether its basic 1:4 CMOS fanout function fits the target design.

RFC Hubungi kami
ICS551MIT - 1:4 Clock Fanout Buffer, 160 MHz | Renesas
ICS551MIT

ICS551MIT - 1:4 Clock Fanout Buffer, 160 MHz | Renesas

The Renesas Electronics ICS551MIT is a low-cost, high-speed clock fanout buffer with a 1:4 fanout ratio, maximum operating frequency of 160 MHz, CMOS inputs and CMOS outputs, and a 3 V to 5.5 V supply range. It is packaged in an 8-SOIC package measuring 0.154 inch, or 3.90 mm, in body width. A clock fanout buffer is a clock-and-timing integrated circuit that distributes one input clock to multiple output branches. It belongs to the hierarchy of clock buffer, clock distribution device, clock and timing IC, and semiconductor. By recreating the input signal at four outputs, the ICS551MIT can reduce the loading on a clock source while supporting multiple downstream clock domains. The principal features of the ICS551MIT are its 1:4 fanout configuration, 160 MHz maximum frequency, CMOS input and output interfaces, and single-supply operation from 3 V to 5.5 V. The part is identified as a low-cost member of the IDT ClockBlocks family and is positioned for compact, cost-sensitive designs that require more than one clock output without the footprint of a larger multi-output device. Its architecture separates the single clock input from four buffered CMOS outputs. This arrangement allows one upstream oscillator or controller to feed several clock-enabled circuits while preserving a consistent clock source throughout the subsystem. The manufacturer documentation identifies the device as a small, high-speed clock buffer, although detailed propagation-delay, skew, rise-time, and fall-time limits must be checked in the datasheet before relying on a particular timing budget. Typical uses include network-interface clock distribution, communications equipment, test and measurement systems, and general digital subsystems requiring a one-input, four-output clock arrangement. The 8-SOIC footprint can also simplify transitions from larger clock-buffer packages when a design requires four outputs but does not need a dual-channel monolithic implementation. PCB implementation should preserve short clock traces, provide a continuous ground reference, and route outputs away from high-current switching paths. Because clock edges can pick up coupling and skew, the input and output nets should use consistent topology, and unused outputs should be handled according to the manufacturer's pin-description and output-disable guidance rather than left floating. This product page combines the manufacturer specifications, verified distributor listings, package details, drop-in candidates, comparison data, and practical layout guidance. It is intended to help engineers assess the ICS551MIT for clock distribution and identify the next step for sourcing or PCB-level replacement.

RFC Hubungi kami
ICS551MT - 160 MHz 1:4 CMOS Clock Buffer | Renesas
ICS551MT

ICS551MT - 160 MHz 1:4 CMOS Clock Buffer | Renesas

Renesas ICS551MT is a low-cost, high-speed 1:4 CMOS clock fanout buffer with a maximum operating frequency of 160 MHz, a 3 V to 5.5 V supply range, and an 8-SOIC package. The device accepts one CMOS clock input and provides four buffered CMOS clock outputs, allowing a single source to drive multiple destinations without requiring multiple distribution stages. A clock buffer is a digital timing IC that reproduces a clock signal with controlled loading and drive characteristics. Within the product hierarchy, ICS551MT is a clock fanout buffer, a clock distribution IC, a timing IC, and ultimately a digital semiconductor. Its four-output topology is useful when a processor, controller, communications circuit, or data-conversion system requires several related clock domains that must originate from one low-jitter reference. Key features include 160 MHz maximum frequency, 1:4 fanout capability, CMOS input and output interfaces, and operation from 3 V to 5.5 V. The 8-SOIC package supports conventional surface-mount assembly while keeping the board footprint compact. The manufacturer identifies the ICS551 family as a low-cost, small clock-buffer option within the Clock Blocks family. The IC provides four independently usable outputs rather than requiring a cascading buffer arrangement. Each output can therefore feed a separate circuit, reducing distribution complexity and avoiding the need to reproduce the source clock multiple times. The exact output rise time, output skew, input-output delay, propagation delay, and operating-temperature limits are not disclosed in the supplied verified data and should be confirmed in the Renesas 551 datasheet before a timing-critical design is released. Typical uses include general-purpose clock distribution in embedded systems, communications equipment, industrial control electronics, and consumer or computing subsystems. The single-input, four-output organization is particularly helpful where four loads share a common clock source and the PCB requires short, controlled clock routes rather than a long point-to-point connection. Designers should place the 0.01 uF VDD decoupling capacitor between pin 7 and pin 6 as close as possible to the device, following the Renesas 551 datasheet. The same source recommends an optional 33 ohm series termination resistor on each clock output when the trace exceeds 1 inch, helping control reflections on longer PCB interconnects. This page consolidates the verified distributor specifications, official application guidance, package details, pricing availability status, and engineering trade-offs for ICS551MT. It distinguishes documented electrical facts from parameters that still require confirmation, helping engineers make faster sourcing and design decisions without inventing missing timing or environmental data.

RFC Hubungi kami
ICS552R-01 - 200MHz 8-Output CMOS Clock Multiplier | Renesas
ICS552R-01

ICS552R-01 - 200MHz 8-Output CMOS Clock Multiplier | Renesas

Renesas Electronics ICS552R-01 is a clock generator, multiplier, and buffer that produces eight low-skew CMOS copies of a clock or a fundamental parallel-mode crystal, with a maximum frequency of 200MHz. The device is available in a 20-pin SSOP package with a 3 V to 5.5 V supply range. Its one-to-eight input-to-output ratio supports designs that need multiple synchronized clock copies without using eight separate oscillators. A clock multiplier is a clock and timing IC that accepts a reference signal, derives a higher-frequency clock, and distributes the result across multiple outputs. Within the electronics hierarchy, it belongs to clock generation and timing, then to clock and timing ICs, and finally to integrated circuits. Unlike a conventional crystal oscillator, the ICS552R-01 family can operate directly from a multiple input clock or a fundamental parallel-mode crystal, providing design flexibility for synchronous digital systems. Key features include eight low-skew outputs, CMOS output technology, PLL capability, and operation up to 200MHz. The one-to-eight output ratio is useful when multiple logic domains require related clocks. A 3 V to 5.5 V supply range permits integration with both 3.3 V and 5 V digital systems, while the 20-SSOP surface-mount format supports compact PCB layouts. The 0°C to 70°C range applies to the identified commercial-temperature variants; other ordering codes may represent different temperature grades. The ICS552R-01 combines clock generation, multiplication, and fan-out functions in one package. Each of the eight outputs provides a low-skew copy of the derived clock, reducing the number of separate clock-driver circuits required when several processors, FPGAs, memory devices, or communication controllers must receive related clock signals. The PLL architecture and broad maximum operating frequency make the device useful when the source clock does not directly match the required system frequency. Typical applications include synchronous processor clock distribution, FPGA or ASIC clock fan-out, memory-controller clock distribution, communications-interface clocking, and general-purpose digital clock trees. It is especially relevant when one source must feed multiple loads while maintaining consistent frequency relationships. The device also supports systems that prefer external fundamental crystals or externally generated multiple clocks over a dedicated oscillator. When laying out the circuit, treat all eight outputs as high-speed clock nets and follow the manufacturer’s recommended termination and decoupling arrangements. Keep clock traces short, provide a continuous ground reference, and avoid routing outputs through uncontrolled impedance discontinuities. Confirm output-drive, jitter, skew, and load-current requirements against the manufacturer datasheet before choosing series termination or a fan-out topology. This product page combines the ICS552R-01 operating limits with practical clock-distribution guidance, ordering-code distinctions, lifecycle considerations, and a comparison framework for evaluating compatible 20-SSOP alternatives. Use the manufacturer pin-description table and electrical characteristics as the final authority for board implementation and production qualification.

RFC Hubungi kami
ICS553MI - 1:4 200 MHz Clock Buffer | Renesas Electronics
ICS553MI

ICS553MI - 1:4 200 MHz Clock Buffer | Renesas Electronics

Renesas Electronics ICS553MI is a low-skew 1:4 clock fanout buffer with a maximum operating frequency of 200 MHz, CMOS inputs and outputs, a 2.375 V to 5.25 V supply range, and an 8-SOIC package measuring 0.154 inch, or 3.90 mm, in width. It is positioned as the lowest-skew, small clock buffer in the ICS ClockBlocks family. A clock fanout buffer is a clock-management IC that receives one periodic signal and distributes multiple synchronized copies to several destinations. The ICS553MI belongs to the fanout buffer subclass of clock and timing ICs, within the broader clock-buffer, clock-driver, and clock-management semiconductor hierarchy. Its 1:4 fanout ratio makes it suitable where one source must feed four loads without redesigning the clock tree. The primary verified specifications are a 1:4 fanout ratio, 200 MHz maximum frequency, CMOS input and output interfaces, and a 2.375 V minimum operating supply voltage with a 5.25 V maximum. The 8-SOIC package supports conventional surface-mount assembly while providing four buffered outputs. These details distinguish it from single-output clock devices, lower-frequency buffers, and devices requiring more than four outputs. The low-skew architecture is intended to minimize output-to-output timing displacement, making the device relevant to synchronous systems in which downstream circuits require closely related clock edges. Exact propagation delay, output-to-output skew, rise time, fall time, output impedance, and input pulse-width limits are not present in the supplied verified data and should be taken from the manufacturer datasheet before timing closure. Typical uses include processor and FPGA clock distribution, communications-interface clock fanout, data-converter clocking, memory-interface timing, and general-purpose digital clock-tree branching. In each case, the single input can feed four destinations while the 200 MHz operating limit defines the upper frequency envelope. The CMOS interfaces also allow the device to operate across a 2.375 V to 5.25 V supply range, subject to the input and output voltage limits in the datasheet. The principal design consideration is timing verification. Engineers should check the worst-case input-to-output and output-to-output skew across process, voltage, and temperature, rather than relying only on the 200 MHz headline frequency. Supply decoupling, input slew rate, trace loading, and the number of clock destinations also require review because they affect edge quality and timing margin. This page consolidates the verified manufacturer and distributor information, distinguishes confirmed specifications from unavailable data, and documents practical clock-tree considerations. It also explains the absence of verified drop-in substitutes so engineers can avoid assuming that a shared package or similar frequency rating guarantees pin-to-pin compatibility.

RFC Hubungi kami
ICS553MIT - 1:4 200MHz Low-Skew Clock Buffer | Renesas
ICS553MIT

ICS553MIT - 1:4 200MHz Low-Skew Clock Buffer | Renesas

Renesas Electronics ICS553MIT is a low-skew clock fanout buffer that distributes one CMOS input clock to four CMOS outputs. It operates from a 2.375 V to 5.25 V supply and supports clock frequencies up to 200 MHz. The device is packaged in an 8-pin SOIC measuring 0.154 inches, or 3.90 mm, in width and belongs to the ICS ClockBlocks family. A clock fanout buffer is a clock-and-timing integrated circuit that regenerates and distributes one incoming clock signal across multiple outputs. Its place in the hierarchy is clock buffer, then clock distribution device, then clock-and-timing IC, and finally semiconductor. Fanout buffers are used where a source clock must drive several destinations while limiting loading, propagation variation, and signal degradation across a larger system. The ICS553MIT is identified as a low-skew, 1-to-4 clock buffer. Its four-output arrangement gives a processor, memory interface, communications circuit, or test instrument multiple usable clock outputs from one source. Operation up to 200 MHz makes it applicable to clock trees operating below that maximum frequency, while its 2.375 V to 5.25 V supply range supports common low-voltage digital systems. The CMOS input and CMOS outputs place the device in the logic and clock-and-timing categories. CMOS interfaces are suitable for modern digital systems because they support rail-to-rail operation in many designs and combine useful noise and power characteristics. Exact propagation delay, output-to-output skew, input-output skew, rise time, fall time, and current-consumption figures should be taken from the manufacturer datasheet before setting timing margins. Typical uses include distributing a reference clock among four digital loads, buffering a source oscillator before it reaches multiple logic blocks, and supporting compact communications, control, or instrumentation equipment. In each case, trace lengths should be arranged so that all four destinations receive clocks within the timing budget established for the system. The primary design consideration is timing margin across all four outputs rather than only the source-to-output path. Keep the input and output connections short, maintain a consistent return path, and place decoupling close to the supply pins. Account for the difference between edge arrival at the input and edge arrival at each load when defining setup and hold requirements. This product page combines the manufacturer part characteristics, source availability, pin-compatible alternatives, comparison criteria, and practical clock-distribution guidance. It is intended to accelerate component identification while keeping the final timing, layout, and qualification decisions with the system designer.

RFC Hubungi kami
ICS557G-03 - 200MHz Spread-Spectrum Clock | Renesas
ICS557G-03

ICS557G-03 - 200MHz Spread-Spectrum Clock | Renesas

The Renesas Electronics ICS557G-03 is a 200 MHz spread-spectrum clock generator and fanout buffer with one output, built in a 16-pin TSSOP package. It supports PCI Express Gen 1 and Ethernet clock requirements while reducing electromagnetic interference in PC and embedded systems. The device accepts clock or crystal inputs, uses a phase-locked loop, and supports HCSL and LVDS output configurations. A spread-spectrum clock generator is a timing semiconductor that intentionally varies clock frequency over a controlled range to spread radiated energy across a wider frequency spectrum. This technique lowers peak electromagnetic emissions without changing the fundamental 200 MHz operating frequency. In the broader semiconductor hierarchy, the ICS557G-03 belongs to the clock and timing IC family, where it combines clock generation, phase locking, distribution, and EMI-control functions. The principal features of the ICS557G-03 include a 200 MHz output, one clock output, PCI Express Gen 1 and Ethernet support, and a PLL-based architecture. The 16-TSSOP package is suitable for compact desktop, industrial, and embedded circuit boards. Its clock and crystal input options allow it to operate from an existing reference or a crystal source, while HCSL and LVDS output support accommodates high-speed differential signaling needs. Internally, the PLL provides the clock-generation mechanism required to create a stable reference-related output while applying frequency dithering for spectrum spreading. This is important in systems where reducing peak EMI improves electromagnetic-compatibility margin without requiring major changes to the downstream clock architecture. Because the ICS557G-03 is identified as both a spread-spectrum clock generator and fanout buffer, it can serve as the central timing source for compatible PCIe or Ethernet equipment. Typical applications include PCI Express Gen 1 cards, Ethernet interface equipment, embedded computer systems, industrial controllers, and compact PCs. The device is particularly relevant where radiated emissions from a high-speed reference clock could interfere with nearby radio, communications, or test equipment. It can also support clock distribution within systems that require a controlled low-frequency clock source. The primary design consideration is ensuring that the selected input reference, crystal, output loading, and downstream receiver comply with the requirements of the Renesas datasheet. Differential trace routing, stable return paths, controlled impedance, and correct termination are essential for stable HCSL or LVDS operation. PCB placement should minimize clock-loop area and keep sensitive routing away from noisy power-conversion stages. This product page combines the Renesas function description, verified distributor specifications, package details, practical implementation guidance, and same-package replacement analysis. It is intended to help engineers determine whether the ICS557G-03 satisfies the required frequency, interface, EMI-control, package, and sourcing constraints before beginning a board-level design.

RFC Hubungi kami
ICS557G-06 - 1:4 HCSL Clock Buffer | Renesas Electronics
ICS557G-06

ICS557G-06 - 1:4 HCSL Clock Buffer | Renesas Electronics

Renesas Electronics ICS557G-06 is a differential PCI Express clock fanout and multiplexer IC with a 1:4 output ratio, 200 MHz listed operating frequency, HCSL or LVDS inputs, and HCSL or LVDS outputs. The device is packaged in a 20-pin TSSOP package and is intended for systems requiring one selected differential clock input to be distributed across multiple outputs. A clock buffer or fanout buffer is a timing IC that reproduces an incoming clock signal across multiple outputs. Clock multiplexers add input selection, allowing a system to choose between clock sources while maintaining consistent output timing. The ICS557G-06 belongs to the clock buffer and clock multiplexer hierarchy, which falls under clock and timing ICs used in PCI Express cards, servers, industrial controllers, and other high-speed digital systems. The principal features of the ICS557G-06 include two differential input pairs, selection of one input pair, four differential output pairs, and support for HCSL and LVDS signal levels. Its one-to-four fanout architecture allows a selected source clock to reach several destinations while reducing the loading that would otherwise be imposed directly on the clock source. The 200 MHz frequency specification identifies the device's stated operating point for design planning. The ICS557G-06 does not use an internal PLL according to the component classification. Instead, it functions as a differential clock mux and fanout buffer: one of two input pairs is selected, and the selected clock is distributed through four differential output pairs. This architecture preserves the role of the original clock source while providing controlled fanout and selection for multi-output clock networks. Typical uses include PCI Express clock distribution, server backplane clock routing, industrial data-acquisition systems, network interface equipment, and test-and-measurement platforms. In a PCI Express design, the device can select the appropriate differential clock source and distribute it to multiple downstream circuits, reducing the fanout burden on the source and helping maintain consistent clock topology. Designers should verify differential impedance, output pair routing, return-path continuity, and input/output logic-level compatibility in the target system. Differential clock traces should be routed as a length-matched pair on a controlled-impedance board, with nearby high-speed or switching nodes kept away from the clock network. Decoupling, grounding, and unused-pin handling should follow the pin-description and layout guidance in the manufacturer datasheet. This page organizes the device function, interface characteristics, package details, application guidance, drop-in replacement information, and engineering design notes into one engineering-focused reference for evaluating the ICS557G-06 in PCI Express clock architectures.

RFC Hubungi kami
ICS557G-08 - 200MHz PCIe Clock Multiplexer | Renesas
ICS557G-08

ICS557G-08 - 200MHz PCIe Clock Multiplexer | Renesas

The Renesas Electronics ICS557G-08 is a PCI Express clock multiplexer IC with a 200 MHz output, one differential output pair, and a 16-pin TSSOP package. It uses a 2:1 multiplexing architecture to select one of two HCSL or LVDS input pairs and fan the selected clock into a differential HCSL or LVDS output pair. This arrangement gives a PCI Express clock source a practical way to switch between reference sources without changing the downstream clock architecture. A PCI Express clock multiplexer is a clock-and-timing IC used to route differential clock signals inside high-speed digital equipment. In the signal hierarchy, it belongs to the PCIe clock source and clock-driver category, combining input-pair selection, differential distribution, and PLL-based clock generation. HCSL means Host Clock Signal Level, while LVDS means Low-Voltage Differential Signaling; both are differential signaling methods suited to high-speed clock distribution. The ICS557G-08 supports a clock output frequency up to 200 MHz and is identified as a 2:1 multiplexer. Its principal features are dual input-pair selection, one differential output pair, support for HCSL or LVDS operation, and a surface-mount 16-pin TSSOP package. The 200 MHz operating point makes the device applicable to PCI Express clocking systems that require controlled selection between reference-clock sources. Its PLL-based architecture is important in a PCIe design because clock-source transitions can affect downstream jitter and system timing. The selected input pair is fanned out through a differential output stage, preserving the electrical signaling method expected by the receiving clock buffer or peripheral. Designers should still validate source-to-destination transition requirements, termination, return-path continuity, and receiver thresholds in the final channel. Typical uses include PCI Express endpoint clock distribution, server and workstation expansion-card designs, embedded PCI Express equipment, and industrial host systems that must select between two external reference clocks. The device can also be considered in test systems where a selectable differential clock source is needed for compatibility or fault-injection testing. When laying out a board, place the IC near the clock source and receiving device, provide a continuous reference plane beneath the differential route, and use impedance-controlled pairs with matched through or via structures. Decoupling should follow the manufacturer reference layout. Because this is a high-speed differential clock device, routing symmetry and connector or package-transition geometry are generally more consequential than a conventional low-speed bypass-only layout. This page consolidates the manufacturer and distributor product information into an engineering summary covering the 2:1 multiplexing function, 200 MHz output capability, package constraints, replacement considerations, and practical PCB guidance. It also distinguishes the exact ICS557G-08 ordering code from other family suffixes and the earlier 8-pin SOIC device so procurement and redesign decisions use the correct footprint.

RFC Hubungi kami
ICS557M-01 - 100MHz PCIe Clock Source | Renesas Electronics
ICS557M-01

ICS557M-01 - 100MHz PCIe Clock Source | Renesas Electronics

Renesas Electronics ICS557M-01 is a PCI Express clock and frequency generator integrated circuit with PLL-based clocking, a 100 MHz differential output, and HCSL/LVDS-compatible signaling. It is designed to provide the reference clock required by PCI Express cards and related high-speed digital systems. The device uses a clock or crystal input and produces a pair of differential outputs, allowing it to support common PCIe clock-source architectures while reducing the number of separate timing components required on the board. The ICS557M-01 is an application-specific clock generator rather than a general-purpose microcontroller or power-management device. In the broader semiconductor hierarchy, it belongs to the clock and timing IC category, where PLL-based frequency generation is used to create stable, phase-aligned clock signals for high-speed interfaces. Its primary design function is to convert a reference clock or crystal into the differential 100 MHz clock used by PCI Express equipment. Key characteristics include one clock-generation circuit, PLL support, clock or crystal input, HCSL and LVDS differential outputs, and a 1:1 input-to-output ratio according to the manufacturer-related product listings. The device is offered in an 8-pin SOIC package, making it suitable for compact PCI Express card designs where component count and board area are important. Differential output architecture helps preserve signal integrity across controlled-impedance PCB traces. The ICS557M-01 is appropriate for PCI Express endpoint cards, add-in cards, embedded PCIe equipment, test systems, and industrial or communication equipment that requires a dedicated reference-clock source. It can simplify clock distribution by providing two differential outputs from one timing circuit. The exact electrical limits, operating-temperature range, output amplitude, jitter, and power-supply requirements should be confirmed against the current manufacturer datasheet before production release. Layout quality is critical in any high-speed clock circuit. Place the device close to the clock-consuming circuitry, use controlled-impedance routing for differential pairs, keep the return path continuous, and minimize stubs and unnecessary vias. Decoupling capacitors should be positioned close to the supply pins according to the datasheet guidance. This page combines the device’s documented PCI Express purpose, package information, interface characteristics, sourcing guidance, and engineering-oriented design notes to support component selection and board-level implementation.

RFC Hubungi kami
ICS558G-01 - 250 MHz 2:4 CMOS Clock Buffer | Renesas
ICS558G-01

ICS558G-01 - 250 MHz 2:4 CMOS Clock Buffer | Renesas

The Renesas ICS558G-01 is a 2:4 fanout clock buffer that distributes a high-speed clock to four low-skew CMOS outputs. The device accepts either CMOS or PECL input, operates from a 2.375 V to 5.5 V supply, and supports frequencies up to 250 MHz. It is packaged in a 16-pin TSSOP measuring 0.173 inch, or 4.40 mm, in width. A clock fanout buffer, also called a clock distribution buffer, is a clock and timing IC that receives one clock signal and reproduces it across multiple outputs. It belongs to the clock buffer and driver family within the broader clock and timing IC category. Clock buffers isolate the source from downstream loading, provide multiple usable clock destinations, and can reduce the timing disturbance that would otherwise appear when several circuits were connected directly to one clock source. The ICS558G-01 provides four CMOS outputs with three-state capability, allowing one, three, or all four outputs to be disabled independently through the output-enable controls. Its input stage supports CMOS and PECL signaling, giving it utility in systems that translate or distribute clocks between different logic families. The 250 MHz maximum operating frequency places it in applications such as telecommunications, networking equipment, industrial control, and general-purpose digital logic. Renesas describes the ICS558-01 as a TO CMOS clock driver with an integrated divide-by-4 function and four low-skew outputs. The divide capability allows the device to support clock distribution arrangements where a divided reference is needed in addition to distributed outputs. The configurable output-enable inputs add bus-management flexibility, particularly in test systems and backplane systems where clock outputs must be parked while a channel is inactive. Typical uses include switching and routing fabrics in telecommunications equipment, parallel clock distribution in network interfaces, synchronization in industrial controllers, and clock generation stages in test and measurement instruments. The device is also suitable for backplane applications because its three-state outputs can be disabled when a module is not selected, reducing contention and unwanted clock activity. The principal design consideration is signal integrity. Because the ICS558G-01 is intended for high-speed distribution, trace length matching, controlled impedance routing, and short output stub lengths help preserve edge quality and maintain usable skew. Decoupling should be placed close to the supply pins, and unused outputs should be disabled rather than left permanently enabled if downstream channels are not required. This page combines the principal electrical specifications, interface details, application guidance, design notes, and verified sourcing information for the ICS558G-01. It also provides a framework for evaluating compatible replacements without changing the 16-TSSOP board footprint or the 2:4 clock-distribution function.

RFC Hubungi kami
ICS570A - 170MHz Zero Delay Buffer | Renesas | Clocking
ICS570A

ICS570A - 170MHz Zero Delay Buffer | Renesas | Clocking

The Renesas Electronics ICS570A is a multiplier and zero-delay buffer clock IC designed for 5 V systems, with a maximum output clock frequency of 170 MHz and an 8-pin SOIC package. It combines clock multiplication, fanout distribution, and zero-delay buffering in one device, making it suitable for systems that need multiple related clock outputs without adding substantial propagation delay. According to the manufacturer datasheet information, the A version is intended for 5 V designs and the B version is intended for 3.3 V designs. A zero-delay buffer is a clock-integrity device that reproduces an input clock at one or more outputs while compensating for internal propagation delay through a phase-locked-loop technique. ICS570A uses Integrated Circuit Systems proprietary analog/digital PLL techniques, allowing the device to provide low input-to-output skew while distributing or multiplying the source clock. The part is therefore positioned between a clock source and the digital circuits, processors, or memory that require synchronized clock signals. Key documented features include support for 14 multiplier choices from 0.5x to 32x, output clock frequency up to 170 MHz at 5 V, and the ability to recover degraded input clock duty cycle. The listed low input-to-output skew is 300 ps maximum for outputs above 60 MHz. The device is also identified as functionally equivalent to the AV9170, although the manufacturer explicitly notes that the AV9170 is not a pin-for-pin replacement. Typical uses include processor and controller clock generation, communication-system clock distribution, memory clocking, retrofit or modernization of older clock architectures, and any board requiring a multiplied or buffered reference clock. The ICS570A should be selected when the surrounding circuit requires a 5 V zero-delay buffer and an 8-pin SOIC footprint. The B version or another device should be considered when the system operates from 3.3 V, because the A and B versions target different supply voltages. Designers should preserve the manufacturer's recommended input, output, termination, and load conditions. Clock jitter and skew tables depend on the termination resistance and load capacitance, so a replacement must be checked against the original clock topology rather than selected only by package. This page combines the verified manufacturer and distributor information with a conservative drop-in assessment, clearly separating confirmed replacements from parts that are only functionally equivalent.

RFC Hubungi kami
ICS570AI - 170MHz Clock Generator | Renesas Electronics
ICS570AI

ICS570AI - 170MHz Clock Generator | Renesas Electronics

The Renesas Electronics ICS570AI is a 170 MHz fanout-distribution, spread-spectrum clock generator and zero-delay buffer built with analog/digital phase-locked-loop techniques. It operates from a 4.75 V to 5.25 V supply and is packaged in an 8-SOIC surface-mount package measuring 0.154 inch, or 3.90 mm, in width. The device combines clock generation, multiplication, zero-delay buffering, fanout distribution, and spread-spectrum operation in one clock-management circuit. A clock generator is an integrated circuit that establishes a stable reference frequency and distributes clock signals to digital logic. A zero-delay buffer preserves clock-edge relationships while compensating for propagation delays introduced by PCB traces and interconnects. The ICS570AI belongs to the ClockBlocks family and integrates an analog/digital PLL with a zero-delay-buffer function, placing it within the broader hierarchy of clock and timing ICs, clock generators, and semiconductor timing devices. The primary features include operation up to 170 MHz, four-clock fanout distribution, spread-spectrum clock generation, zero-delay buffering, and multiplier functionality. Spread-spectrum operation reduces energy concentrated at a single frequency, which can reduce narrowband emissions and improve electromagnetic-compatibility behavior in systems that need controlled clock spreading. Fanout allows multiple destinations to receive related clock signals from one source while maintaining consistent phase relationships. Technically, the device uses proprietary analog/digital PLL techniques to multiply or generate the required output frequency and to compensate for clock-path delay. This architecture is intended for high-speed systems in which several digital subsystems must operate from a common timing reference. The A-version is identified for 5 V designs, while the device family also includes a 3.3 V B-version; therefore, supply voltage must be checked carefully when comparing family members or considering a replacement. Typical applications include high-speed data-transfer equipment, memory interfaces, communications equipment, network-processing systems, server and storage platforms, and clock-distribution trees for FPGA-based or ASIC-based designs. The 170 MHz rating makes the device relevant to legacy and established digital platforms that need a compact, integrated alternative to discrete oscillators, dividers, and multiple buffer stages. PCB implementation should prioritize short clock routes, continuous return paths, and symmetrical fanout geometry. Place decoupling capacitors close to the supply and ground pins, and avoid routing sensitive clock nets beneath noisy switching components. Because spread-spectrum settings and PLL loop behavior affect system timing, validate output jitter, skew, rise time, and EMI at the intended operating frequency before production release. This product page organizes the verified operating limits, package information, sourcing guidance, engineering applications, replacement constraints, and design checks for the ICS570AI. It also distinguishes documented electrical facts from parameters that require confirmation against the manufacturer datasheet or system measurements, helping engineers make a technically defensible design decision.

RFC Hubungi kami
ICS570AIT - 170MHz Zero-Delay Clock Buffer | Renesas
ICS570AIT

ICS570AIT - 170MHz Zero-Delay Clock Buffer | Renesas

Renesas ICS570AIT is a 170 MHz PLL-based zero-delay buffer (ZDB) and fanout clock distributor packaged in an 8-pin SOIC. The A-version is intended for 5 V designs, providing four non-inverted CMOS clock outputs with low-delay clock distribution and programmable spread-spectrum operation. Its clock-buffer architecture integrates analog and digital phase-locked-loop techniques to synchronize multiple system clock domains. A zero-delay buffer is a clock-management IC that reproduces an input clock at its outputs while compensating for internal propagation delay through a phase-locked loop. Positioned within the hierarchy of clock and timing ICs, a ZDB complements ordinary clock buffers by allowing a system to obtain several low-skew copies of a reference clock. Fanout distribution expands one source into multiple synchronized loads for processors, memory interfaces, communications equipment, and embedded control systems. The ICS570AIT supports clock frequencies up to 170 MHz and includes spread-spectrum clock generation for reducing narrowband EMI emissions in sensitive equipment. Its four CMOS outputs provide one-to-four fanout capability, while the PLL-based zero-delay architecture supports predictable clock relationships between distributed loads. The 8-pin SOIC package measures approximately 3.90 mm in width and accepts a 0.154-inch lead pitch. The A-version supply recommendation distinguishes ICS570AIT from the 3.3 V B-version. Designers must therefore verify supply rails, input levels, output loading, and downstream input thresholds before applying the device. Because the part distributes rather than originates the reference clock, input slew rate, return path, and output termination remain important aspects of the implementation. Typical applications include processor and memory clock distribution, communications-interface clock fanout, embedded system clock trees, and EMI-sensitive digital equipment. Spread-spectrum operation is particularly relevant when the reference clock feeds high-speed digital circuitry and reduced spectral concentration is desirable without eliminating the fundamental clock. For reliable implementation, use the pin-description table and typical application circuit in the manufacturer datasheet when assigning PCB tracks. Keep the reference clock and output routes short, provide a continuous return plane, and validate timing at the actual device pins because package and trace delay can affect a nominal zero-delay design. This product reference combines the device architecture, operating limits, package information, sourcing guidance, and design considerations needed to evaluate the ICS570AIT. It also distinguishes verified drop-in alternatives from related clock devices that require different voltage, pinout, output-count, or circuit arrangements.

RFC Hubungi kami