Produk (44,000+)

LC4064V-25T44C - 64-Macro, 2.5ns CPLD | Lattice Semiconductor
LC4064V-25T44C

LC4064V-25T44C - 64-Macro, 2.5ns CPLD | Lattice Semiconductor

The Lattice Semiconductor LC4064V-25T44C is a 64-macro-cell complex programmable logic device in a 44-pin TQFP package, with a 2.5 ns indicated speed designation and support for 3.3 V, 2.5 V, and 1.8 V supply options. It belongs to the ispMACH 4000 family of SuperFAST high-density programmable logic devices and combines the ispLSI 2000 and ispMACH 4A architectures. A CPLD is a user-programmable digital logic device organized around interconnected macro cells, programmable interconnect resources, and I/O structures. Positioned as a complex programmable logic device, it bridges the gap between simple programmable logic arrays and larger FPGAs. This hierarchy places the LC4064V within programmable logic, then programmable-logic devices, and finally the broader semiconductor category. The device provides 64 macro cells, a 2.5 ns speed designation, and a 44-pin TQFP package. The ispMACH 4000 architecture supports in-system programmability, allowing a circuit to be configured through its programming interface without being removed from its assembled PCB. The family supports multiple nominal supply options of 3.3 V, 2.5 V, and 1.8 V, enabling designers to match the device to different logic-system power requirements. The SuperFAST designation reflects a design intended for higher logic performance than conventional CPLDs. Its macro-cell architecture supports the implementation of combinational and registered logic used for control, decoding, interface translation, address handling, and glue logic. The 44-pin TQFP package also provides a surface-mount option for compact programmable-logic assemblies, although the physical footprint and pin assignments must be checked against the manufacturer pin table before layout release. Typical uses include industrial control logic, peripheral-interface controllers, data-format converters, sequencers, and system-level control blocks. Because the part is obsolete according to distributor lifecycle information, it is most appropriate for maintenance of existing equipment, replication of an established board, or a design where the exact archived device and its programmed configuration are required. For new layouts, preserve the original power, ground, programming, and I/O routing conventions of the LC4064V-25T44C. Do not substitute a different package or a device with different I/O assignments without checking the pin description and programming configuration. Confirm the obsolete-part sourcing status and availability before committing production quantities. This page combines the device identity, lifecycle status, package information, pin-compatible family options, and application guidance to support obsolete CPLD maintenance and replacement planning. It also distinguishes documented electrical facts from parameters that require confirmation from the manufacturer datasheet before a new PCB or safety-related production release.

RFC Hubungi kami
LC4064V-25T48C - 64-Macrocell 2.5ns CPLD | Lattice
LC4064V-25T48C

LC4064V-25T48C - 64-Macrocell 2.5ns CPLD | Lattice

The Lattice Semiconductor LC4064V-25T48C is an ispMACH 4000V complex programmable logic device with 64 macrocells, four logic blocks, up to 32 user I/O pins, and a 2.5 ns propagation-delay class, housed in a 48-pin TQFP surface-mount package. It supports 3.3 V, 2.5 V, and 1.8 V in-system programmable SuperFAST high-density PLD applications. A complex programmable logic device, or CPLD, is a user-programmable semiconductor that combines interconnected programmable logic blocks with configurable I/O structures. The LC4064V series belongs to the ispMACH 4000V family, a high-density PLD family positioned between simple PAL/GAL devices and larger FPGAs. Its macrocell-based architecture provides deterministic combinational and registered logic, allowing control, interface, decoding, and glue-logic functions to be consolidated into a compact device. Key features include 64 macrocells, four logic blocks, and as many as 32 I/O pins. The -25 speed designation identifies a 2.5 ns propagation-delay class, while the family documentation identifies operation with 3.3 V, 2.5 V, and 1.8 V programming and I/O environments. In-system programmability allows the device to be configured from the target system rather than requiring a separate programming fixture. The 48-pin TQFP package supports conventional surface-mount assembly and PCB inspection. The ispMACH 4000 architecture uses interconnected macrocells and shared programmable interconnect resources to implement logic equations and sequential functions. Because the device is organized into macrocells rather than individually described gates, a design can be expressed in a hardware description language and compiled into a compact configuration image. Lattice documents that density devices within the same package can share a common pin arrangement, which supports design migration when capacity requirements change. Typical uses include industrial control logic, interface translation, bus decoding, peripheral glue logic, display sequencing, and embedded system control. The four logic blocks and 32 available I/O pins make the device suitable for designs that require a moderate number of parallel digital signals and moderately fast deterministic transitions. It is also appropriate for industrial equipment and legacy control systems where a small, low-density CPLD is preferable to a larger FPGA. Design with the LC4064V-25T48C by assigning each external signal to a documented package pin, observing the supply and I/O voltage limits, and confirming that every implemented function fits the available macrocell and logic-block resources. Include the manufacturer's recommended programming interface and decoupling arrangement, and validate timing against the external clock and interface requirements rather than relying on the speed grade alone. This product page combines package and family details, pin-compatible family alternatives, application guidance, and PCB-focused design notes. It is intended to help engineers assess whether the 64-macrocell, 32-I/O, 2.5 ns CPLD provides sufficient logic density, interface capacity, and timing performance for a specific embedded-control design.

RFC Hubungi kami
LC4064V-5T100C - 3.3V 64-I/O SuperFAST CPLD | Lattice
LC4064V-5T100C

LC4064V-5T100C - 3.3V 64-I/O SuperFAST CPLD | Lattice

The Lattice Semiconductor LC4064V-5T100C is a 3.3 V, 64-I/O complex programmable logic device in a 100-pin TQFP package. It belongs to the SuperFAST high-density PLD family and supports in-system programming for 3.3 V, 2.5 V, and 1.8 V supply configurations. The device is designed to consolidate multiple PAL and GAL-style logic functions into one programmable device while preserving the familiar deterministic behavior expected by control and interface designs. A complex programmable logic device, or CPLD, is a user-programmable semiconductor that sits between fixed-function logic and a field-programmable gate array. Its architecture provides a defined logic structure, predictable timing, and nonvolatile configuration retention. The LC4064V-5T100C offers 64 programmable I/O pins, making it useful where a design requires substantially more external glue logic than a small classic PLD can provide. Key device characteristics include a 3.3 V operating rail, a 3.0 V to 3.6 V internal supply range, and a commercial junction-temperature range from 0 °C to 90 °C. Its 100-pin TQFP package measures 14 mm by 14 mm and provides adequate routing density for buses, counters, state machines, address decoding, interface control, and general-purpose combinational or sequential logic. In-system programming allows a design to be updated without removing the device from the assembled board. The SuperFAST architecture targets high-density designs requiring more logic capacity and faster propagation performance than conventional low-density PLDs. Because configuration is stored in nonvolatile memory, the LC4064V-5T100C starts with its programmed logic immediately after power is applied and does not require an external configuration loader. This simplifies board design compared with SRAM-based programmable logic that depends on a host processor or dedicated configuration source. Typical applications include industrial control and automation, instrumentation, peripheral controllers, legacy bus-interface consolidation, test and measurement equipment, and embedded system support logic. It can also serve as a companion controller beside microcontrollers, FPGAs, or memory devices when several fixed timing-critical functions must be implemented independently. When designing a PCB around this device, reserve all 100 package positions for signal routing even though only 64 I/O functions are specified, and follow the manufacturer's pin-description table for power, ground, configuration, and dedicated-function assignments. Confirm the intended voltage configuration, decoupling requirements, and unused-pin treatment against the manufacturer datasheet before releasing the layout. This page combines the device's core electrical and packaging characteristics with a practical comparison against pin-compatible Lattice SuperFAST options, application guidance, and PCB-focused design notes. These resources help engineers identify meaningful differences in speed grade, voltage support, and temperature grade without treating package compatibility as proof of functional interchangeability.

RFC Hubungi kami
LC4064V-5T100I - 64-Macro CPLD | Lattice Semiconductor
LC4064V-5T100I

LC4064V-5T100I - 64-Macro CPLD | Lattice Semiconductor

Lattice Semiconductor LC4064V-5T100I is a 64-macro-cell, in-system-programmable complex programmable logic device in a 100-pin TQFP package. It belongs to the ispMACH 4000V family and supports 3.3 V, 2.5 V, and 1.8 V supply operation according to the family documentation. The -5 speed designation identifies the fast system-performance grade, while the I suffix identifies the industrial-temperature option. A CPLD, or complex programmable logic device, is a user-programmable digital semiconductor that combines programmable logic blocks, programmable interconnect, and input/output resources into a compact logic solution. In the product hierarchy, the LC4064V-5T100I is a CPLD, a form of programmable logic, within the broader FPGA and CPLD category. Its 64 macro cells provide more integration than basic PAL or GAL devices while retaining nonvolatile configuration and predictable timing. The principal feature is in-system programmability, allowing the device to be configured through its programming interface without removal from the circuit. The family supports 3.3 V, 2.5 V, and 1.8 V operation, allowing the same logic architecture to serve multiple supply environments. Its 100-pin TQFP package provides a substantial number of user I/O resources for interfacing external memories, control buses, data converters, and industrial peripherals. The ispMACH 4000V architecture blends the characteristics of Lattice ispLSI 2000 and ispMACH 4A devices. In a typical design, the CPLD performs deterministic control, protocol conversion, address decoding, interface bridging, or launch-data and capture-data functions. Its macro-cell organization is appropriate for compact glue logic around processors, FPGAs, memories, and communication peripherals rather than large DSP or high-speed parallel-processing workloads. Typical uses include industrial control and factory automation, network-interface logic, instrumentation, embedded system support, and general-purpose product control. The 64 macro cells can consolidate multiple Boolean functions and state-machine sections into one device. Designers should match the design to the device architecture, available I/O, supported supply voltage, timing constraints, and system programming requirements before assigning pins or compiling the final logic. The principal design considerations are power-supply integrity, correct JTAG or serial programming connections, disciplined I/O assignment, and verification of timing constraints. The I suffix supports industrial-temperature operation, but the complete device should still be evaluated against its absolute maximum and recommended operating conditions in the manufacturer datasheet. Board design should also account for signal-integrity requirements associated with high-speed clock and control nets. This page organizes the device family information, lifecycle status, drop-in replacement candidates, package details, sourcing options, and practical design guidance. It is intended to help engineers identify whether the LC4064V-5T100I matches an existing ispMACH 4000V design before requesting a formal quotation or reviewing the complete manufacturer documentation.

RFC Hubungi kami
LC4064V-5T44C - 5 ns 64-Macrocelle ISP CPLD | Lattice
LC4064V-5T44C

LC4064V-5T44C - 5 ns 64-Macrocelle ISP CPLD | Lattice

The Lattice Semiconductor LC4064V-5T44C is a 64-macrocelle in-system-programmable complex programmable logic device with a 5 ns propagation delay, 30 user I/O pins, four logic array blocks, and a 44-TQFP package measuring 10 x 10 mm. The device supports 3.3 V, 2.5 V, and 1.8 V in-system-programmable SuperFAST high-density PLD operation according to the supplied manufacturer-family data. A CPLD, or complex programmable logic device, is a user-programmable digital semiconductor that belongs to the FPGA and programmable-logic hierarchy. It combines macrocell-based logic, programmable interconnect, user I/O, and nonvolatile configuration memory in a deterministic architecture. Compared with a soft-logic implementation inside an FPGA, a CPLD generally provides a simpler design flow and predictable timing for compact control, interface, and glue-logic functions. The LC4064V-5T44C provides four logic array blocks, 64 macrocells, and 30 user I/O pins. Its headline 5 ns propagation delay supports designs requiring faster logic response than slower speed grades. The family description identifies in-system programmability for 3.3 V, 2.5 V, and 1.8 V programming environments, allowing configuration or design updates without removing the device from its assembled circuit board. The 44-TQFP surface-mount package exposes the device's programmable I/O and power connections on a compact 10 x 10 mm footprint. Pin assignments, configuration behavior, and electrical limits must be taken from the LC4064V datasheet rather than inferred from the distributor category text. The supplied web results identify the -5 speed grade, 44-pin package, 30 I/O pins, four logic array blocks, 64 macrocells, 5 ns propagation delay, and 3 V to 3.6 V internal supply voltage. Typical uses include peripheral-interface bridging, industrial control logic, bus-interface adaptation, data-format conversion, embedded system control, and general-purpose glue logic. These applications benefit from the device's combination of 64 macrocells, 30 user I/O, in-system programming, and a short 5 ns propagation delay. Designers should still evaluate timing across all paths and confirm signal standards and voltage compatibility with the complete design. For implementation, place the device close to the signals it serves, provide stable supply bypassing, and follow the datasheet's recommended programming interface and decoupling layout. A TQFP package has exposed leads on all four sides, so fanout can still constrain routing beneath the package. Validate the final design with the manufacturer's timing models and verify the selected system interface and I/O voltage requirements. This page consolidates the supplied distributor and cross-reference results with package-level application guidance, verified family specifications, and an explicit distinction between electrically similar alternatives and confirmed drop-in choices. It also identifies unavailable pricing, lifecycle, and detailed pin-assignment data rather than inferring those values from the MPN.

RFC Hubungi kami
LC4064V-5T44I - 64-Macrocell 3.3V CPLD | Lattice Semiconductor
LC4064V-5T44I

LC4064V-5T44I - 64-Macrocell 3.3V CPLD | Lattice Semiconductor

Lattice Semiconductor LC4064V-5T44I is an in-system-programmable CPLD with 64 macrocells, 30 user I/Os, a 3.3 V supply, and a 5.0 ns speed grade in a 44-pin TQFP package. It belongs to the ispMACH 4000V SuperFAST high-density PLD family and supports 3.3 V, 2.5 V, and 1.8 V operation according to the manufacturer datasheet. The LC4064V-5T44I is identified as an industrial-grade device with a stated system frequency of 227.27 MHz. A complex programmable logic device, or CPLD, is a programmable-logic semiconductor that combines macrocell-based combinational and sequential logic with a nonvolatile configuration architecture. Within the broader hierarchy, a CPLD is a programmable-logic device, an FPGA alternative, and a semiconductor. Compared with a small FPGA, a CPLD generally offers predictable timing and in-system programmability, making it useful for control logic, interface conditioning, bus arbitration, and fixed logic consolidation. The verified device information identifies 64 macrocells, 30 user I/Os, 3.3 V operation, 5.0 ns speed grading, a 227.27 MHz maximum frequency, 44-pin TQFP construction, and industrial-grade temperature positioning. Its in-system programming capability allows a board manufacturer to load or update the logic configuration during manufacturing, test, or field operation without removing the device from the circuit. The LC4064V-5T44I is part of Lattice Semiconductor's SuperFAST high-density ispMACH 4000V family. The 5.0 ns grade is intended for designs requiring faster logic propagation than slower members of the family, while the 64 macrocells provide a moderate capacity for consolidating multiple fixed functions into one programmable device. The 30 available user I/Os support connections to external memories, control signals, communications peripherals, and mixed-signal system blocks. Typical uses include industrial controller logic, data-acquisition interfaces, instrumentation, embedded system glue logic, protocol conversion, and legacy bus-interface consolidation. Its fixed-capacity architecture and in-system programmability are especially useful when a design must deliver deterministic behavior without the resource overhead and configuration complexity of a larger FPGA. A critical design consideration is the 44-pin TQFP footprint and its 30 user I/O complement. The PCB must match the manufacturer's land pattern, preserve adequate clearance around all leads, and route high-speed or sensitive signals away from noisy switching nodes. Because verified pricing and detailed electrical limits were not present in the supplied records, designers should confirm the complete manufacturer datasheet and current distributor inventory before release. This page consolidates verified distributor and datasheet-search records, same-family drop-in alternatives, technical comparisons, and practical selection guidance. It distinguishes confirmed device facts from missing electrical, pinout, pricing, and lifecycle details so that engineers can make a qualified sourcing or design decision without relying on unverified assumptions.

RFC Hubungi kami
LC4064V-5T48C - 64-Macro-Cell 227 MHz CPLD | Lattice
LC4064V-5T48C

LC4064V-5T48C - 64-Macro-Cell 227 MHz CPLD | Lattice

The Lattice Semiconductor LC4064V-5T48C is an in-system-programmable CPLD with 64 macro cells, 32 I/O, a 227 MHz maximum operating frequency, and a 48-pin TQFP package. It belongs to the ispMACH 4000V family of SuperFAST high-density programmable logic devices and supports 3.3 V, 2.5 V, and 1.8 V supply configurations. The -5 speed designation corresponds to a 5 ns class of device, while the family specification identifies a maximum system frequency of 227 MHz. A CPLD, or complex programmable logic device, is a programmable-logic semiconductor that combines configurable logic blocks, programmable interconnect, and I/O resources. In the product hierarchy, a CPLD is a programmable logic device, a form of FPGA & CPLD semiconductor, and a practical alternative to a small gate array when deterministic logic, nonvolatile configuration, and in-system reprogrammability are more important than very high logic density. The LC4064V family targets control, interface, glue-logic, and signal-routing functions. Key features include 64 macro cells, 32 user I/O, in-system programmability, and a nominal 5 ns speed grade. Its 3.3 V, 2.5 V, and 1.8 V operating options provide flexibility across legacy industrial and embedded control systems. The 48-pin TQFP package also supports conventional PCB assembly and inspection processes. The source data identifies the device as a SuperFAST high-density PLD and part of the ispMACH 4000V family. Technically, the LC4064V-5T48C is best understood as a compact, nonvolatile logic platform rather than a general-purpose processor. Macro cells implement registered or combinational logic, while programmable interconnect routes signals among the cell array and package pins. In-system programming allows the same board to be configured or updated without removing the device, provided the associated programming interface, power rails, and signal conditions meet the device requirements. Typical uses include industrial control interfaces, peripheral bus decoding, legacy display and memory glue logic, automotive or communications equipment, and embedded system sequencing. The 32-I/O configuration is suitable for moderate pin-count interfaces rather than high-channel-count parallel buses. Engineers should account for available macro cells, I/O standards, timing constraints, and programming voltage when designing around the device. The primary design consideration is availability: available sources label LC4064V-5T48C as obsolete, so new production designs should confirm lifecycle status before committing to a long-term program. For an existing PCB, the 48-pin TQFP footprint and -5 speed grade must be preserved, and any replacement should be checked for identical pin functions, voltage support, macro-cell architecture, and timing behavior. This page consolidates verified distributor specifications, family-level technical details, source-backed replacement candidates, pricing availability, and practical migration guidance. It separates confirmed LC4064V-5T48C data from parameters that require confirmation in the manufacturer datasheet, helping engineers assess fit, sourcing risk, and drop-in replacement feasibility more efficiently.

RFC Hubungi kami
LC4064V-5T48I - SuperFAST High-Density PLD | Lattice
LC4064V-5T48I

LC4064V-5T48I - SuperFAST High-Density PLD | Lattice

Lattice Semiconductor LC4064V-5T48I is a SuperFAST high-density programmable logic device in the ispMACH 4000 family, combining the ispLSI 2000 and ispMACH 4A architectures. The device is identified as a 3.3V, 2.5V, and 1.8V in-system programmable CPLD, allowing it to support multiple supply-voltage arrangements in compact embedded systems. Its 48-pin TQFP package and industrial-grade ordering code make it suitable for designs requiring deterministic programmable control, signal conditioning, interface bridging, and logic consolidation. A complex programmable logic device is a programmable semiconductor that combines multiple programmable logic blocks, interconnect resources, and input/output structures into one configurable integrated circuit. Within the device hierarchy, a CPLD is a programmable logic device, a semiconductor, and an alternative to a small FPGA or discrete gate-array implementation. LC4064V-5T48I provides in-system programmability, allowing a design to be programmed after PCB assembly when a suitable programming path and device support are available. The verified device family information identifies the LC4064V as a high-density PLD offering a flexible combination of logic capacity, low power, and performance. The part suffix denotes a -5 speed grade and an industrial temperature option, while the 48 suffix identifies the 48-pin package configuration. These details make the MPN suitable for industrial control logic, data acquisition interfaces, communication control, and embedded system support functions where a consolidated programmable device can reduce board complexity. The LC4064V family supports 3.3V, 2.5V, and 1.8V operation. This voltage flexibility is important when a board uses multiple logic voltage domains, although designers must still observe the exact pin, voltage, timing, and power requirements documented for the selected device and package. The -5 grade should be selected when the design requires the family’s faster timing grade rather than a slower speed option. Typical applications include programmable I/O expansion, bus-interface control, industrial machine sequencing, communication protocol handling, and general-purpose glue logic. The 48-pin TQFP package also provides a practical surface-mount footprint for manufacturing and allows access to a larger number of package pins than smaller CPLD packages. Because the verified data does not provide detailed logic-block counts, I/O counts, timing tables, or exact pin names, those values should be confirmed in the manufacturer datasheet before final schematic or PCB sign-off. Designers should verify the device’s complete pinout, power-supply sequencing, decoupling requirements, and programming interface against the manufacturer documentation. The TQFP-48 package should be routed with adequate thermal and solder-joint consideration, and unused inputs should be handled according to the device recommendations. This page combines the verified family description, sourcing information, same-package alternatives, and practical selection guidance; it does not replace the complete electrical and timing data in the manufacturer datasheet.

RFC Hubungi kami
LC4064V-75T44C - 64-Macro Cell 3.3V CPLD | Lattice
LC4064V-75T44C

LC4064V-75T44C - 64-Macro Cell 3.3V CPLD | Lattice

Lattice Semiconductor LC4064V-75T44C is a 3.3 V, 64-macro-cell complex programmable logic device in a 44-pin TQFP package. It belongs to the ispMACH 4000 high-density PLD family and provides 30 user I/O, a 7.5 ns device speed grade, and operation from a 1.8 V, 2.5 V, or 3.3 V supply. The device is intended for designs requiring nonvolatile, in-system programmable logic for interface, control, and glue-logic functions. A CPLD is a programmable logic device organized around macro cells and a programmable interconnect. Compared with a mask-programmed logic implementation, a CPLD allows a design to be revised by replacing its configuration data rather than manufacturing a new ASIC. Within the broader hierarchy, the LC4064V-75T44C is a complex programmable logic device, which is a semiconductor within the programmable-logic-device family. It is distinct from microcontrollers because its logic behavior is primarily established through a user configuration rather than software execution. The 64-macro-cell architecture supports consolidation of multiple fixed-function gates, counters, state machines, address decoding, and interface control into one programmable device. Its 30 I/O, 3.3 V operating supply, and 44-pin TQFP package are useful for compact control boards, industrial automation equipment, test systems, and legacy peripheral expansion. The -75 designation identifies a 7.5 ns speed grade in the manufacturer naming system, while the 44 suffix identifies the 44-pin package option. The ispMACH 4000 architecture combines the characteristics of Lattice ispLSI 2000 and ispMACH 4A devices. Family documentation states that devices of different densities in the same package retain the same pinout, enabling migration within the family. This architectural consistency supports design reuse, although firmware, timing constraints, and device-specific functions still require validation before changing density or grade. Typical uses include bus-interface control, data capture and formatting, industrial sequence control, instrumentation, test-equipment glue logic, and general-purpose peripheral interfacing. In these applications, the device can consolidate logic that would otherwise require multiple GAL, PAL, or small CPLD parts. Nonvolatile in-system programming also supports production configuration, field updates, and maintenance without removing the device from its circuit. Designers should use the manufacturer pin table and device-programmer instructions when assigning package pins and creating a board footprint. The 44-pin TQFP package requires adequate lead clearance, careful solder-paste control, and inspection of fine-pitch leads. Power rails should be decoupled close to the device, while unused inputs should be tied to a defined logic level. Configuration pins and programming-interface connections should follow the recommended schematic and termination guidance. This product page combines the device identity, package information, documented electrical characteristics, source links, engineering application guidance, and a cautious drop-in comparison. It is designed to help engineers assess LC4064V-75T44C suitability while preserving the distinction between a verified footprint match and a replacement that still requires configuration, timing, and lifecycle review.

RFC Hubungi kami
LC4064V-75T44E - 7.5ns 64-Macrocell CPLD | Lattice
LC4064V-75T44E

LC4064V-75T44E - 7.5ns 64-Macrocell CPLD | Lattice

The Lattice Semiconductor LC4064V-75T44E is an in-system-programmable SuperFAST high-density CPLD with 64 macrocells, 7.5 ns propagation delay, and a 44-pin TQFP package. It supports operation with 3.3 V, 2.5 V, and 1.8 V supply levels, combining reconfigurable logic integration with a compact surface-mount footprint. A CPLD, or complex programmable logic device, is a user-programmable semiconductor used to implement fixed digital logic functions through a nonvolatile configuration architecture. Its hierarchy includes CPLD, programmable logic device, digital logic IC, and semiconductor. Compared with a discrete gate-array design, a CPLD allows logic behavior to be changed without replacing the device and can consolidate multiple counter, decode, interface, and control functions into one package. The LC4064V-75T44E combines a 7.5 ns speed grade with a 64-macrocell device configuration. Its in-system programming capability supports configuration workflows that simplify board bring-up, production programming, and field updates. Operation from 3.3 V, 2.5 V, or 1.8 V provides design flexibility across mixed-voltage systems, while the 44-pin TQFP package offers a conventional gull-wing surface-mount footprint suitable for automated assembly and prototype boards. The device belongs to Lattice Semiconductor's SuperFAST high-density PLD family, which combines an ispLSI 2000-style architecture with ispMACH 4A characteristics. The 64-macrocell resource supports consolidated control logic for communications, industrial interfaces, test equipment, embedded systems, and general-purpose digital products. The 7.5 ns propagation-delay designation identifies the performance grade used when evaluating timing paths in the target design. Typical uses include peripheral-interface control, bus decoding, counter and timer logic, display and system control, instrumentation, and factory automation. In each application, the same programmable device can consolidate fixed digital functions that would otherwise require multiple gates, counters, multiplexers, and glue logic. Its 44-pin TQFP package also makes it suitable for designs that require moderate I/O density without moving to a large BGA footprint. PCB design should preserve short configuration and logic paths, provide a stable supply connection, and include the decoupling and programming-interface arrangements specified by the Lattice Semiconductor datasheet. Before release, validate timing, unused I/O behavior, programming voltage, power-up conditions, and signal integrity against the complete design. Do not substitute a device with a different pin count or speed grade without reviewing its pinout and timing characteristics. This page organizes the LC4064V-75T44E specifications, documented drop-in alternatives, comparison criteria, and practical implementation guidance. It helps engineers evaluate the 64-macrocell, 7.5 ns, 44-pin TQFP device alongside related LC4064V options while preserving package compatibility and separating electrically equivalent choices from redesign-level alternatives.

RFC Hubungi kami
LC4064V-75T44I - 64-Macro 168MHz CPLD | Lattice Semiconductor
LC4064V-75T44I

LC4064V-75T44I - 64-Macro 168MHz CPLD | Lattice Semiconductor

Lattice Semiconductor LC4064V-75T44I is an ispMACH 4000V complex programmable logic device with 64 macro cells, a 168 MHz maximum system frequency, and a 44-pin TQFP package. The device belongs to the in-system-programmable SuperFAST CPLD family and supports 3.3 V, 2.5 V, and 1.8 V supply configurations. Its industrial-temperature grade is specified for operation from -40°C to +105°C. A complex programmable logic device, or CPLD, is a user-programmable semiconductor that combines multiple programmable logic blocks, programmable interconnect, and I/O resources into one integrated logic solution. In the broader semiconductor hierarchy, a CPLD occupies the position between discrete gate logic and more complex programmable devices such as FPGAs. It is generally used when a design requires rapid configuration, deterministic combinational and registered logic, and a compact implementation without loading a large FPGA design. The LC4064V-75T44I provides 64 macro cells in its ispMACH 4000V family. The architecture combines characteristics associated with Lattice ispLSI 2000 and ispMACH 4A devices. Its SuperFAST designation reflects the family's emphasis on high-speed programmable logic, while the -75 speed grade corresponds to the 168 MHz operating-frequency listing. In-system programmability allows a board designer to configure the CPLD through the programming interface rather than relying on a mask-programmed device. The 44-pin TQFP construction provides a compact surface-mount platform with 0.8 mm pitch and 30 user I/O according to the device listing. Supporting 3.3 V, 2.5 V, and 1.8 V operation gives designers flexibility across mixed-voltage systems. The broad -40°C to +105°C industrial range supports industrial automation, communications equipment, embedded control, and test systems where commercial-temperature variants would be insufficient. Typical applications include peripheral interfacing, bus decoding, state-machine control, signal conditioning, data-format conversion, and glue logic for industrial or communications systems. The LC4064V-75T44I is particularly suitable when the required logic fits within 64 macro cells but needs a faster timing target than conventional low-density PLD families. It can also consolidate several discrete logic functions into one programmable package. PCB design should preserve a clean programming interface, route clock and high-speed nets with controlled impedance where required, and decouple each applicable supply rail close to the device. The TQFP package requires careful lead inspection after soldering because its fine 0.8 mm pitch can complicate visual inspection. Confirm the pinout and power configuration against the manufacturer datasheet before finalizing the board layout. This product page organizes the device's principal specifications, verified sourcing information, package details, and drop-in alternatives for faster engineering evaluation. It also highlights replacement constraints and application-specific considerations that help teams assess the LC4064V-75T44I before committing to a PCB or production program.

RFC Hubungi kami
LC4064V-75T48C - 64-Macrocell 7.5 ns CPLD | Lattice
LC4064V-75T48C

LC4064V-75T48C - 64-Macrocell 7.5 ns CPLD | Lattice

The Lattice Semiconductor LC4064V-75T48C is an in-system-programmable complex programmable logic device with 64 macrocells, a maximum propagation delay of 7.5 ns, and 32 user I/O pins. It is supplied in a 48-pin TQFP package measuring 7 mm by 7 mm. The device belongs to the ispMACH 4000V family, a high-density PLD architecture combining in-system programmability with support for 1.8 V, 2.5 V, and 3.3 V system levels. A complex programmable logic device, or CPLD, is a user-programmable semiconductor that implements fixed logic functions through configurable internal macrocell and interconnect resources. Its position in the product hierarchy is CPLD → programmable logic device → programmable logic IC → semiconductor. Compared with an FPGA, a CPLD generally offers deterministic nonvolatile configuration and straightforward timing behavior, making it useful for control logic, interface conditioning, bus arbitration, and compact glue-logic designs. The LC4064V provides 64 macrocells, four logic elements, and 32 user I/O pins. Its 7.5 ns maximum propagation-delay designation supports high-speed control paths, while the in-system-programmable architecture allows the finished board to be configured or updated without removing the device. The 48-TQFP surface-mount package also offers a practical pin count for boards requiring both external interfaces and internal control logic. This device uses the ispMACH 4000V architecture, which Lattice describes as a blend of the ispLSI 2000 and ispMACH 4A architectures. The architecture is intended for designs requiring predictable logic implementation and migration among density devices that share a package pinout. Although the 400 MHz figure associated with a related family member may be used to characterize the product family, individual signal timing should be evaluated from the complete device timing tables rather than inferred from that frequency alone. Typical uses include peripheral-interface bridging, data-format conversion, industrial control logic, communications sequencing, test-interface multiplexing, and general-purpose glue logic. The 32 available user I/O pins make the device appropriate for designs combining multiple bus interfaces or discrete control signals. Because the logic is nonvolatile and programmable, it is particularly useful where deterministic boot behavior and field reconfiguration are valuable. PCB design should preserve the manufacturer's recommended power, ground, clock, and programming-signal arrangements. Decoupling capacitors should be placed close to the supply pins, programming access should remain unobstructed, and unused inputs should be handled according to the device's stated configuration rules. Signal-routing choices should also account for package escape delays and the external timing budget of each connected peripheral. This product page combines the device's 64-macrocell architecture, 7.5 ns timing designation, 32 user I/O availability, 48-TQFP footprint, family-level alternatives, and practical migration considerations. It also highlights the distinction between an exact MPN replacement and a functionally similar family member whose operating-temperature or supply-level details still require engineering review.

RFC Hubungi kami
LC4064V-75T48E - 64-Macrocell 7.5ns CPLD | Lattice Semiconductor
LC4064V-75T48E

LC4064V-75T48E - 64-Macrocell 7.5ns CPLD | Lattice Semiconductor

The Lattice Semiconductor LC4064V-75T48E is a 64-macrocell SuperFAST complex programmable logic device with a 7.5 ns propagation delay, 168 MHz maximum system frequency, and a 48-pin TQFP package. It belongs to the ispMACH 4000V family and supports 3.3 V, 2.5 V, and 1.8 V supply operation. The device provides 30 user I/O pins and combines programmable logic density with in-system programmability for compact embedded control designs. A complex programmable logic device, or CPLD, is a user-programmable semiconductor that combines multiple logic arrays into one configurable integrated circuit. In the product hierarchy, a CPLD sits between discrete gates and more complex programmable logic devices. Its internally connected macrocells and global routing make it useful when a design needs deterministic timing, moderate logic density, and a relatively simple configuration workflow compared with a field-programmable gate array. The LC4064V-75T48E provides 64 macrocells, 30 user I/O pins, and a 7.5 ns propagation-delay grade. Its 168 MHz maximum system-frequency rating supports control, interface, and glue-logic functions operating from a 3.3 V, 2.5 V, or 1.8 V supply. In-system programming allows the configuration device to be loaded through its programming interface, helping support prototype updates and production programming without relying on a separate one-time-programmable configuration memory. The ispMACH 4000 architecture combines the ispLSI 2000 and ispMACH 4A design approaches, as described in the manufacturer family documentation. Its architecture supports predictable signal propagation and is intended for designs that need more integration than discrete programmable logic, while retaining a lower-complexity alternative to an FPGA. The 48-pin TQFP package also exposes a practical mix of user I/O for board-level implementations. Typical applications include industrial control and automation, embedded peripheral interfacing, display-control logic, communication-interface support, and compact consumer or communications equipment. The 64-macrocell capacity can consolidate address decoding, state-machine logic, counters, latches, and interface control into one device. The 30 user I/O count is especially useful for designs that need moderate board-level connectivity without moving to a larger package. PCB design should preserve clean power and ground distribution around the TQFP leads, with decoupling placed close to the supply pins. Configuration and I/O timing should be reviewed against the actual clock, load, and voltage conditions. Because the exact pin assignments and electrical limits must be matched to the configuration file, designers should use the pin table and device guidance in the manufacturer family documentation before assigning board signals. This product record combines the device architecture, package information, engineering selection criteria, and application-oriented design guidance with a focused comparison against same-package family options. It is structured to help engineers identify whether the 7.5 ns device grade, 64 macrocells, 30 I/O pins, and 48-pin TQFP implementation match a specific logic-design requirement.

RFC Hubungi kami
LC4064V-75T48I - 64-Macro-Cell 168MHz CPLD | Lattice
LC4064V-75T48I

LC4064V-75T48I - 64-Macro-Cell 168MHz CPLD | Lattice

The Lattice Semiconductor LC4064V-75T48I is a 64-macro-cell CPLD based on the ispMACH 4000V architecture, with a listed system frequency of 168 MHz, 3.3 V operation, and a 48-pin TQFP package. It combines programmable logic blocks, in-system programmability, and low-voltage I/O support in a surface-mount package suited to compact control and interface designs. A CPLD, or complex programmable logic device, is a user-programmable semiconductor that sits between fixed-function logic and larger FPGAs. Its interconnected macrocells provide deterministic routing for control logic, interface adaptation, state machines, address decoding, and signal conditioning. The ispMACH 4000V family is designed for applications where a modest logic capacity, straightforward programming, and compact packaging are more important than the very high resource counts of an FPGA. The LC4064V-75T48I provides 64 macrocells, a 168 MHz listed frequency, and a 3.3 V core supply. Its family supports 3.3 V, 2.5 V, and 1.8 V in-system programming environments, allowing the device to fit mixed-voltage systems with appropriate interface design. The -75 designation identifies the device speed grade, while the I suffix denotes the industrial-temperature ordering option used in this product family. The 48-pin TQFP package offers a conventional surface-mount footprint with perimeter leads on a 0.5 mm pitch. Its relatively small pin count is useful when the design requires several I/O paths but does not need the larger pin budgets associated with higher-capacity PLDs. In-system programming helps simplify manufacturing, field updates, and prototype bring-up because the configuration interface can operate within the system rather than requiring a separate dedicated programmer. Typical uses include industrial control, instrumentation, communication interfaces, legacy peripheral emulation, and embedded system glue logic. The 64-macro-cell device can consolidate several gate-level functions into one configurable component, reducing board area and avoiding the expense of implementing equivalent logic with numerous fixed gate arrays. It is particularly suitable for designs requiring modest interconnect complexity and repeatable, deterministic behavior. Layout should preserve adequate decoupling at the supply pins, keep programming-interface routing away from fast or noisy analog-adjacent nets, and follow the manufacturer's pinout and recommended power-architecture guidance. Logic timing, output loading, and supply integrity must be checked against the actual clock and I/O requirements. The manufacturer datasheet remains the controlling reference for pin assignment, absolute maximum ratings, AC timing, and programming procedures. This page combines the device's architecture and package information with practical replacement guidance, application context, and a parameter comparison for engineers evaluating the LC4064V-75T48I against same-package Lattice variants and pin-compatible CPLD options.

RFC Hubungi kami
LC4064ZC-5M56C - 64-Macro CPLD, 400 MHz, 56-CSBGA | Lattice
LC4064ZC-5M56C

LC4064ZC-5M56C - 64-Macro CPLD, 400 MHz, 56-CSBGA | Lattice

Lattice Semiconductor LC4064ZC-5M56C is a 64-macro-cell complex programmable logic device with a maximum operating frequency of 400 MHz, a 2.5 ns propagation delay, and 32 user I/Os in a 56-ball CSBGA package. It belongs to the ispMACH 4000Z family of CMOS CPLDs and supports in-system programming from 3.3 V, 2.5 V, or 1.8 V supply levels. A complex programmable logic device, or CPLD, is a programmable semiconductor that combines multiple programmable logic blocks, programmable interconnect, and dedicated I/O resources into one integrated device. Within the broader hierarchy, a CPLD is a digital logic IC and a form of programmable logic device that sits between simple programmable array logic and field-programmable gate arrays. Its nonvolatile configuration, deterministic signal paths, and in-system programmability make it useful for control logic, bus arbitration, interface translation, and fixed data-processing functions. The LC4064ZC-5M56C provides up to four global signals according to the family documentation and combines high-density logic with fast timing. Its 400 MHz maximum operating frequency supports high-speed control paths, while the 2.5 ns propagation delay provides deterministic response for registered logic. Thirty-two user I/Os provide connections to external buses, memory, converters, and peripheral devices, while the 56-CSBGA package supports dense board layouts. The -5 speed designation corresponds to the 2.5 ns propagation-delay grade shown in the manufacturer documentation. CMOS implementation and support for 1.8 V, 2.5 V, and 3.3 V operation allow the device to interface with multiple logic voltage domains. In-system programming simplifies configuration updates and allows programming through the same board used during operation, reducing the need for dedicated programming connectors or separate fixture arrangements. Typical uses include industrial control and data-acquisition systems, network interface and protocol-handling logic, embedded bus arbitration, display or memory-controller glue logic, and compact embedded control systems. The 32 I/Os are particularly useful when a design needs several address, control, and serial-interface signals without moving to a larger programmable-logic package. The CSBGA package also requires careful PCB escape routing and inspection for assembled boards. Design work should begin with the Lattice Semiconductor ispMACH 4000Z pin table and package drawing. Keep power and ground connections routed according to the manufacturer's recommended layout, provide suitable decoupling at every supply connection, and use a programming interface that matches the selected ispMACH configuration method. Validate BGA assembly and inspection requirements with the board manufacturer before releasing the PCB. This product page combines device specifications, package and programming guidance, lifecycle information, comparison data, and practical implementation notes. It also documents the limited set of identified package-compatible alternatives and explains where timing, temperature grade, or device-identification differences must be checked before replacement.

RFC Hubungi kami
LC4064ZC-5M56I - 64-Macrocell 200MHz CPLD | Lattice Semiconductor
LC4064ZC-5M56I

LC4064ZC-5M56I - 64-Macrocell 200MHz CPLD | Lattice Semiconductor

The Lattice Semiconductor LC4064ZC-5M56I is an ispMACH 4000Z-family CPLD with 64 macrocells, 4 logic elements, a 200 MHz operating frequency, 1.8 V operation, and a 56-pin CSBGA package. It is designed for in-system programmable logic where compact pin density, deterministic programmable logic, and mixed 1.8 V, 2.5 V, or 3.3 V supply options are useful. The device provides a combination of programmable logic resources and a high-density ball-grid-array footprint for space-constrained embedded systems. A complex programmable logic device, or CPLD, is a user-programmable semiconductor that combines AND/OR-style logic structures with nonvolatile configuration memory. In the broader hierarchy, a CPLD is a programmable logic device, a digital semiconductor, and an alternative to a field-programmable gate array. Lattice’s ispMACH 4000Z family is positioned for designs requiring more logic density and higher performance than small legacy GAL devices while retaining in-system programmability. The LC4064ZC-5M56I provides 64 macrocells and 4 logic elements according to the manufacturer-product information, with a listed maximum operating frequency of 200 MHz. Its 56-CSBGA package uses a 6 mm x 6 mm ball-grid-array format. The device is also identified as supporting 1.8 V, 2.5 V, and 3.3 V supply configurations, allowing it to sit within mixed-voltage embedded systems when its power architecture and I/O rules permit. The principal design benefit is consolidated programmable logic in a compact package. The 56-pin CSBGA footprint can reduce board area compared with larger leaded or plastic packages, but it requires careful escape routing, fine-pitch assembly capability, and inspection during PCB fabrication. Because the LC4064ZC-5M56I is a CPLD rather than an FPGA, it is generally considered for glue-logic, control, decoding, interface, and fixed datapath functions where deterministic configuration and compact implementation are important. Typical uses include industrial control logic, data-acquisition interfaces, communication protocol handling, embedded system arbitration, and compact instrumentation. The 200 MHz frequency rating makes it suitable for moderate-speed control and datapath logic, while the 64-macrocell resource count supports multiple parallel logic blocks. Designers should confirm the exact timing budget, I/O standards, pin assignments, and configuration requirements against the manufacturer datasheet before releasing a PCB. For implementation, plan the power rails, decoupling, programming interface, JTAG access, and all 56 BGA lands during schematic capture. Keep sensitive or high-speed routes away from programming and configuration activity where practical, and validate the assembled board with continuity and X-ray inspection because hidden BGA solder joints cannot be visually inspected from the top side. This page combines the exact device identifiers, package information, search-suggested documentation queries, and engineering guidance for LC4064ZC datasheet, pinout, replacement, and application-circuit planning.

RFC Hubungi kami
LC4064ZC-5T48C - 64-Macro CPLD, 5 ns | Lattice
LC4064ZC-5T48C

LC4064ZC-5T48C - 64-Macro CPLD, 5 ns | Lattice

Lattice Semiconductor LC4064ZC-5T48C is an in-system-programmable CPLD with 64 macro cells, a 5 ns propagation-delay grade, 1.8 V operation, and a 48-pin TQFP package. It belongs to the ispMACH 4000Z high-density programmable logic device family and combines configurable logic, programmable interconnect, and system-level programmable I/O in one device. A complex programmable logic device, or CPLD, is a programmable-logic semiconductor positioned between fixed-function logic and more flexible FPGAs. Its interconnected macro cells retain their programmed configuration, allowing deterministic timing and compact logic consolidation. In the product hierarchy, the LC4064ZC-5T48C is a CPLD, a programmable-logic device, and ultimately an integrated circuit used for embedded control and signal-processing logic. The device provides 64 macro cells and a 5 ns speed designation for high-density logic designs requiring fast propagation performance. Its operating supply supports 3.3 V, 2.5 V, and 1.8 V operation, while a 200 MHz internal frequency is associated with this 48-pin member. The combination of in-system programmability, compact 48-pin TQFP packaging, and configurable I/O makes the device useful for control logic, interface conditioning, state-machine implementation, and embedded system consolidation. The ispMACH 4000Z architecture provides a programmable alternative to a collection of individual logic gates. Its macro cells can implement combinational and sequential functions, while dedicated global signals support clock distribution across the programmed logic. A design engineer can consolidate control functions into one package, reduce interconnections between separate devices, and create a stable platform for peripheral bridging or embedded control tasks. Typical implementations include industrial controller logic, communications-interface conditioning, instrumentation control, data-acquisition systems, and compact embedded control platforms. The 48-pin TQFP package is especially useful when a moderate number of I/O is sufficient and a conventional surface-mount footprint is preferred over a very large ball-grid array. Designers should still validate timing, pin assignment, power sequencing, and programming requirements against the manufacturer datasheet before releasing a production PCB. For a new design, preserve the manufacturer's recommended power-supply decoupling and use the pin-description table in the LC4064ZC datasheet when assigning tracks. Confirm the exact commercial or industrial temperature grade, programming interface, and supported system clock assumptions for the selected ordering code. Treat the 5 ns designation as the device speed grade rather than as a guaranteed end-to-end clock period for every logic path. This page combines the LC4064ZC-5T48C family identity, verified distributor references, drop-in ordering-code comparisons, and practical integration guidance. It also distinguishes documented electrical and packaging facts from parameters that still require confirmation from the manufacturer datasheet, helping engineers make a faster and more defensible design choice.

RFC Hubungi kami
LC4064ZC-5T48I - 64-Macro CPLD, 400 MHz | Lattice
LC4064ZC-5T48I

LC4064ZC-5T48I - 64-Macro CPLD, 400 MHz | Lattice

Lattice Semiconductor LC4064ZC-5T48I is a 64-macro-cell, in-system-programmable SuperFAST CPLD with a maximum operating frequency of 400 MHz, 2.5 ns propagation delay, and support for 3.3 V, 2.5 V, and 1.8 V supply levels. The device is offered in a 48-pin TQFP package and provides 32 user I/O pins. A complex programmable logic device, or CPLD, is a programmable semiconductor that combines multiple programmable logic functions into one integrated circuit. The ispMACH 4000 architecture combines the characteristics of the ispLSI 2000 and ispMACH 4A families. Its macro-cell structure allows designers to implement control logic, interface logic, decoding, state machines, and fixed-function replacement logic without changing the PCB when logic requirements change. The LC4064ZC-5T48I provides up to 64 macro cells, 32 user I/O pins, a 400 MHz maximum operating frequency, and 2.5 ns propagation delay. These characteristics make it appropriate for general-purpose logic consolidation, embedded control, bus decoding, data routing, and systems requiring in-system programmability. The -5 speed designation corresponds to the 5 ns-class performance stated for this family, while the 400 MHz figure identifies the maximum operating-frequency class rather than a guaranteed frequency for every logic design. In-system programming allows the device configuration to be updated through its programming interface while it remains part of the assembled system. This supports prototype revision, field configuration changes, and production-programming workflows. The device operates from 3.3 V, 2.5 V, or 1.8 V, enabling integration with logic systems using different supply levels, although each board must satisfy the complete power, timing, and pin constraints for the selected operating mode. Typical uses include industrial control, communications equipment, instrumentation, test systems, and embedded products requiring a compact implementation of multiple logic functions. Its 48-pin TQFP package also provides a practical option for designs that need moderate I/O density and a conventional surface-mount footprint. System timing should be evaluated with the actual routing, logic depth, and external loading rather than relying only on the headline frequency rating. For a new design, follow the manufacturer pin-assignment, power-decoupling, and configuration-pin requirements directly. Account for all unused pins and programming-interface signals, validate timing at the intended voltage and temperature, and preserve a clean supply rail. The family’s in-system-programmable architecture simplifies logic updates, but it does not remove the need for careful board-level signal-integrity and power-integrity design. This product page combines the device’s core architecture and timing specifications with a package-focused pinout guide, engineering design notes, and a structured comparison of pin-compatible speed-grade alternatives. These resources help engineers identify whether the LC4064ZC-5T48I fits a logic-density, timing, voltage, and PCB-footprint requirement before committing to a design.

RFC Hubungi kami
LC4107C-X2 LCD Driver IC | onsemi | Display Interface
LC4107C-X2

LC4107C-X2 LCD Driver IC | onsemi | Display Interface

The onsemi LC4107C-X2 is an LCD driver interface IC offered in an unspecified package, with verified distributor information identifying it as an LCD driver, display driver, and interface component. The available data does not state the supply voltage, output count, interface logic, package pin count, operating-temperature range, or electrical timing values; those specifications remain [DATA_NEEDED: verified technical specifications] until the manufacturer datasheet is obtained. Its verified distributor description is sufficient to position it for LCD display-driver and interface applications, but not to infer a specific LCD segment count or pinout. An LCD driver IC is an interface device that translates control information and timing signals into electrical drive levels required by LCD glass. In the power hierarchy, it belongs to integrated circuits, interface ICs, display drivers, and discrete display-interface functions. LCD drivers may control segment and common electrodes, provide bias generation or level conversion, and coordinate display refresh timing. The LC4107C-X2 is associated with display-driver listings rather than power-management, memory, or general-purpose logic functions. The verified records identify the LC4107C-X2 as an onsemi part distributed through DigiKey, Rochester Electronics, Ampheo, JAK Electronics, YIC Electronics, Full Electronic, and Octopart. One Octopart record reports a price of $1.19000 and 32,840 units in stock, while another distributor record reports 8.462 units and unit pricing starting at $1.58 with volume discounts stated for 10, 100, 500, and 1,000 units. Because the supplied records do not provide a complete, normalized manufacturer datasheet or a single verified stock quantity, engineers should confirm electrical limits, pin compatibility, lifecycle status, and current inventory before design release. Typical design use includes LCD instrument panels, small alphanumeric or graphic displays, embedded control interfaces, and legacy display assemblies where an existing PCB footprint and timing architecture must be preserved. The device is not suitable for direct replacement selection based only on the distributor category label; the package, pinout, interface voltage, segment count, refresh requirements, and display-bias details must be checked against the original design and the authoritative onsemi documentation. The main engineering trade-off is availability versus verification depth. Distributor inventory is reported, but the supplied source snippets omit most electrical and mechanical parameters. Before soldering, confirm the exact package and pin numbering, required supply rails, input logic levels, LCD bias method, maximum clock or update rate, and recommended decoupling using the manufacturer datasheet. For price and availability decisions, use the reported values as of 2026-10-23 and reconfirm at the distributor before purchasing. This page consolidates verified distributor category, inventory, pricing, and source links while marking unprovided technical values for verification. It intentionally does not invent display dimensions, LCD segment count, package details, pin names, timing figures, or compliance claims that are absent from the supplied data.

RFC Hubungi kami
LC4128V-75TN100C - 128-Macrocell CPLD, 7.5ns TQFP-100 | Lattice
LC4128V-75TN100C

LC4128V-75TN100C - 128-Macrocell CPLD, 7.5ns TQFP-100 | Lattice

The Lattice Semiconductor LC4128V-75TN100C is a 128-macrocell, 3.3V/2.5V/1.8V In-System Programmable SuperFAST High-Density CPLD from the ispMACH 4000V family, housed in a 100-pin TQFP (TN) package. It delivers a 7.5 ns pin-to-pin propagation delay (tPD) and supports a 400 MHz maximum internal operating frequency, making it one of the fastest non-volatile logic devices in its density class. A Complex Programmable Logic Device (CPLD) is a non-volatile, instantly-on programmable logic device that implements combinatorial and sequential logic in a single chip, typically organized as multiple PAL-like logic blocks connected by a programmable interconnect matrix. CPLDs sit below FPGAs in logic density but offer faster, more deterministic propagation delays and instant wake-up from power-on, which is why they are favored for glue logic, bus bridging, and control-plane applications. Key features of the LC4128V-75TN100C include 128 macrocells across 4 logic blocks (32 macrocells per block), 64 user I/O pins, JTAG-based IEEE 1149.1 boundary-scan and in-system programmability, four global clock pins with programmable polarity, and a 3.3V core with multi-voltage I/O supporting 1.8V, 2.5V, and 3.3V interfaces. Power consumption is managed through per-macrocell product-term steering and a low-power standby mode. The device is built on a non-volatile E2CMOS process, which means configuration is retained without external memory and the part is ready to operate within microseconds of power-up. The wide I/O voltage compatibility allows direct interfacing with legacy 5V-tolerant buses through external resistors and with modern 1.8V/2.5V/3.3V processors without level shifters. Typical applications include bus-interface bridging (PCI to local bus, address decoding), glue logic in industrial controllers, power-sequencer replacement of discrete logic, and feature expansion for ASIC/microcontroller pin-limited designs. It is commonly used in telecom line cards, motor-control boards, and instrumentation front-ends where deterministic timing is required. When designing with the LC4128V-75TN100C, ensure the JTAG chain order is correctly defined for ISP, observe the 3.3V supply ramp requirements, and verify that the chosen I/O standard matches the bank voltage. Unused I/O pins must be configured as outputs or tri-stated with the proper termination to avoid leakage. This page consolidates distributor pricing, true drop-in same-package alternatives, application circuit notes, and design-time considerations that the manufacturer datasheet does not compile on a single page, helping engineers shorten evaluation cycles.

RFC Hubungi kami
LC4128ZE-7MN144C - 128-Macrocell 1.8V Ultra-Low-Power CPLD | Lattice
LC4128ZE-7MN144C

LC4128ZE-7MN144C - 128-Macrocell 1.8V Ultra-Low-Power CPLD | Lattice

The Lattice Semiconductor LC4128ZE-7MN144C is a 128-macrocell ultra-low-power CPLD from the ispMACH 4000ZE family, housed in a 144-ball CSBGA (7x7 mm, 0.5 mm pitch) package. It features 96 user I/O, 8 logic blocks, a 7.5 ns pin-to-pin propagation delay (tpd), and a maximum internal operating frequency of 172 MHz. The device operates from a single 1.8 V core supply (1.7 V to 1.9 V) and is in-system programmable through a standard IEEE 1532 / JTAG interface. A CPLD (Complex Programmable Logic Device) is a non-volatile programmable logic device that combines multiple PAL-like AND/OR arrays with a central switch matrix. CPLDs sit between discrete glue logic (74-series gates) and FPGAs in the programmable logic hierarchy: like discrete logic they boot instantly from on-chip flash, and like FPGAs they implement arbitrary combinatorial and sequential functions. The ispMACH 4000ZE family specifically targets battery-powered and portable applications where static and dynamic power consumption are critical. Key differentiating features include Lattice's ultra-low-power 1.8 V architecture, per-pin slew-rate control, 3.3 V tolerant I/O with 5 V tolerant inputs, in-system programmability via JTAG, and a commercial operating temperature range of 0C to +90C (TJ). The CSBGA-144 package is footprint-compatible with the rest of the ispMACH 4000ZE family (64, 128, 256, and 512 macrocell densities in the same 144-ball outline where applicable), enabling designers to migrate density up or down without PCB rework. Architecturally, each macrocell contains a programmable AND array feeding an OR array, a flip-flop, and a feedback path. Eight logic blocks are interconnected by a global routing pool, providing predictable, deterministic timing with zero-fanout delays independent of placement. This makes the LC4128ZE-7MN144C well suited to replace multiple 74LV logic chips with a single in-system reconfigurable device while preserving exact cycle-accurate behavior. Typical applications include portable handheld and battery-powered consumer products, digital camera and camcorder glue logic, low-power instrumentation, LCD display timing controllers, and I2C/SPI/UART bus bridging/level shifting. The ultra-low static current also makes it attractive as a power-management sequencer in always-on subsystems of larger SoCs. Designers should note that 96 I/O is the maximum user I/O count - the actual usable count depends on JTAG programming pin sharing. Always use Lattice's ispLEVER Classic or Lattice Diamond (with the ispMACH 4000ZE support files) for synthesis and fitting to guarantee timing closure. The CSBGA package requires careful PCB layout with microvia or via-in-pad technology to escape the 0.5 mm ball pitch. This page synthesizes distributor pricing, drop-in same-family alternatives, and practical design notes not found in the manufacturer datasheet alone.

RFC Hubungi kami
LCMXO2-1200HC-4SG32C - MachXO2 1280-LUT FPGA, 32-QFNS | Lattice
LCMXO2-1200HC-4SG32C

LCMXO2-1200HC-4SG32C - MachXO2 1280-LUT FPGA, 32-QFNS | Lattice

The Lattice Semiconductor LCMXO2-1200HC-4SG32C is a 1280-LUT MachXO2 family high-performance (HC) field-programmable gate array (FPGA) in a 32-pin QFNS exposed-pad form factor. Functions include 21 I/O banks, 65,536 bits of on-chip flash memory, and up to 2.5 V/3.3 V core and I/O operation with on-chip voltage regulation. The -4 speed grade delivers the high-performance tier, with -5 and -6 being faster. A Field-Programmable Gate Array (FPGA) is a type of programmable logic device (PLD) that allows engineers to configure digital logic blocks and interconnect after fabrication. Within the broader IC hierarchy, an FPGA belongs to programmable logic -> logic ICs -> integrated circuits. The MachXO2 family targets low-power, instant-on bridging and control applications that historically used CPLDs or small ASICs. Compared to a CPLD (non-volatile, deterministic, instant-on) the FPGA category adds LUT-based distributed RAM, true dual-port block memory, dedicated FIFO control logic, and hard I/O features. Compared with high-density FPGAs, MachXO2 prioritizes low standby power, instant-on behavior, and small packages over raw LUT count. Key feature highlights include advanced 65 nm low-power process technology, as little as 22 µW standby power, programmable low-swing differential I/O, dedicated FIFO control logic, and up to 256 kbits of user Flash memory plus up to 54 kbits of distributed RAM. The HC devices integrate an internal linear voltage regulator that allows single-supply operation while supporting I/O bank voltages from 1.2 V to 3.3 V. The HC variant (high-performance, with linear regulator) sits between the ZE ultra-low-power variant and the HE high-performance with enhanced I/O variant. Pin selection across HC, HE and ZE families is compatible at the same package, allowing power-tier upgrades on the same PCB. The device supports instant-on via internal Flash, SPI, I2C and parallel configuration ports, and includes embedded hard IP for common bridging protocols. Typical applications include I/O expansion and bus bridging for consumer and industrial boards, glue logic replacement, LED control, system monitoring, and low-density control PLD functions. Industrial automation, IoT edge nodes, and portable consumer designs use MachXO2 for its instant-on and low standby current. When selecting a MachXO2, consider standby power (ZE lowest), I/O performance (HE fastest edges, more I/O standards), and internal regulator (HC and HE include, ZE requires external 3.3 V). For -4SG32C users, the package and pinout allow migration to ZE and HE versions without PCB changes. This page synthesizes distributor pricing, drop-in alternatives, and practical design notes not found in the manufacturer datasheet.

RFC Hubungi kami
LCMXO2-1200HC-4TG100C - 1280-LUT 3.3V FPGA | Lattice
LCMXO2-1200HC-4TG100C

LCMXO2-1200HC-4TG100C - 1280-LUT 3.3V FPGA | Lattice

The Lattice Semiconductor LCMXO2-1200HC-4TG100C is a MachXO2 field-programmable gate array with 1,280 LUTs, 79 available I/O according to the DigiKey listing, and a 100-LQFP package. The device operates from a 3.3 V supply in the -4 speed grade and is identified as a commercial-temperature TG100 variant. Its programmable architecture supports logic, distributed memory, user programmable memory, and dedicated FIFO control logic. Reported features include an advanced 65 nm low-power process, programmable low-swing differential I/O, standby power as low as 22 uW, distributed RAM up to 54 kbits, and user memory up to 256 kbits. An FPGA is a reconfigurable semiconductor in the programmable-logic and logic-device hierarchy. Unlike a fixed-function microcontroller or application-specific IC, an FPGA implements digital logic, state machines, interfaces, and signal-processing functions through a programmable configuration stored in on-chip memory. The MachXO2 family targets low-cost, low-power designs where logic density, reconfigurability, and short product-development cycles matter more than very high performance. The LCMXO2-1200HC-4TG100C combines a 1,280-LUT logic fabric with 65,536 bits of block memory and 79 listed I/O in the TG100 package. Its -4 speed designation, 3.3 V supply, and commercial-temperature variant make it suitable for compact control, interface, communications, and embedded-logic designs. The MachXO2 platform also provides configurable I/O standards and low-power operating options, allowing one programmable device to serve multiple board-level interfaces. Typical uses include sensor conditioning, motor and actuator control, industrial data acquisition, communication bridges, embedded test logic, and low-volume control systems. The TG100 package is large enough for a substantial number of board connections while remaining suitable for conventional surface-mount PCB assembly. Designers should verify the exact pin functions, I/O standards, configuration requirements, power sequencing, and unused-pin treatment against the Lattice MachXO2 family datasheet before layout release. For robust implementation, treat configuration storage, JTAG access, power rails, decoupling, I/O voltage compatibility, and unused I/O as deliberate design decisions. The listed 22 uW standby power is a standout low-power figure, but actual system consumption depends on the selected configuration, clocking, I/O activity, and enabled power-saving modes. This page consolidates verified distributor excerpts, source URLs, package information, and practical selection guidance for engineers evaluating the LCMXO2-1200HC-4TG100C. It is intended to accelerate datasheet review, sourcing, and design triage while preserving explicit data gaps where the supplied sources do not establish a value.

RFC Hubungi kami
LCMXO2-1200HC-4TG144C - 1280 LUT FPGA | Lattice | TQFP-144
LCMXO2-1200HC-4TG144C

LCMXO2-1200HC-4TG144C - 1280 LUT FPGA | Lattice | TQFP-144

The Lattice Semiconductor LCMXO2-1200HC-4TG144C is a low-power, non-volatile Field Programmable Gate Array (FPGA) from the MachXO2 family. It features 1280 Look-Up Tables (LUTs), 107 user I/O pins, and 65536 bits of embedded block RAM, all housed in a 144-pin TQFP package. Operating from a 2.5V or 3.3V supply, this device is designed for cost-sensitive, low-density logic applications. A Field Programmable Gate Array (FPGA) is an integrated circuit that can be configured by the customer after manufacturing to implement custom digital logic functions. Unlike fixed-function ASICs, FPGAs offer reconfigurability, allowing designers to iterate on designs without costly mask changes. The MachXO2 family sits at the low-density end of the FPGA spectrum, bridging the gap between CPLDs and larger FPGAs, and is often used for glue logic, I/O expansion, and system management. Key features of the LCMXO2-1200HC-4TG144C include an advanced 65 nm low-power process, standby power as low as 22 µW, and programmable low swing differential I/O. It also offers instant-on functionality with non-volatile configuration, eliminating the need for external boot memory. The device supports up to 54 kbits of distributed RAM and dedicated FIFO control logic, making it suitable for simple data buffering and control applications. Technically, the MachXO2 architecture combines LUT-based logic with embedded block RAM and flexible I/O banks. The -4 speed grade indicates a mid-range performance level, with maximum operating frequency typically around 150 MHz. The device includes on-chip oscillator, PLL, and configuration logic, reducing external component count. Its non-volatile nature ensures the FPGA is ready immediately at power-up, a critical feature for system control and boot sequencing. Typical applications include system management, I/O expansion, motor control, and display interfaces. The low power consumption and instant-on capability make it ideal for portable and battery-powered devices. In industrial settings, it can serve as a bridge between different voltage domains or as a flexible glue logic solution. When designing with this FPGA, pay attention to power supply decoupling and I/O bank voltage requirements. The device supports multiple I/O standards, and proper termination may be needed for high-speed signals. Also, consider using Lattice's free design software, Diamond, for synthesis and implementation.

RFC Hubungi kami