Produk (44,000+)

LC4064B-5T44C - 64-Macro 5ns ISP CPLD | Lattice Semiconductor
LC4064B-5T44C

LC4064B-5T44C - 64-Macro 5ns ISP CPLD | Lattice Semiconductor

Lattice Semiconductor LC4064B-5T44C is a 64-macro complex programmable logic device with a 5 ns speed grade, supplied in a 44-pin TQFP package. It belongs to the ispMACH 4000B SuperFAST high-density PLD family and supports in-system programming with 3.3 V, 2.5 V, and 1.8 V supply options. The combination of 64 configurable logic macros, in-system programmability, and a 5 ns device designation makes the device suitable for compact control, interface, decode, and glue-logic implementations. A CPLD is a programmable logic device that combines programmable AND/OR logic structures with nonvolatile configuration storage. Within the semiconductor hierarchy, a CPLD is a programmable-logic IC, a member of the FPGA and CPLD category, and a practical alternative to a small FPGA when designs require straightforward combinational and sequential logic, deterministic configuration, and a modest pin count. The LC4064B family specifically targets high-density SuperFAST applications where board-level control and interface logic must be consolidated without using a large programmable-logic device. Verified device information identifies 64 macro cells, a 5 ns speed designation, a 44-TQFP package, and in-system programming capability. The family description also confirms compatibility with 3.3 V, 2.5 V, and 1.8 V supply environments. In-system programming allows a board designer to configure or update the logic after PCB assembly, while the TQFP package supports conventional surface-mount assembly and inspection. Exact logic macro architecture, I/O counts, electrical limits, and timing tables are not present in the supplied records and must be confirmed in the manufacturer datasheet before design release. The LC4064B-5T44C is positioned for designs that need more logic density and a faster speed grade than slower Lattice CPLD options without moving to a substantially different device family. Its 64 macro cells provide a defined capacity for control-state machines, address decoding, bus arbitration, signal conditioning, and peripheral interfacing. Because the available records do not include the complete timing tables or I/O standards, system timing should be evaluated against the datasheet rather than inferred solely from the 5 ns family speed designation. Typical uses include industrial control logic, embedded peripheral interfaces, compact communications equipment, instrumentation, and general-purpose digital system support. A CPLD can consolidate decoding and control functions that would otherwise occupy several fixed-function ICs. It can also provide a stable interface between a microcontroller, memory, display controller, or communication peripheral, provided the device voltage, pin assignment, timing, and I/O standards are compatible with the surrounding circuit. The main design consideration is verification of the exact package pinout and electrical limits before layout. Designers should confirm which pins support in-system programming, determine the required VCC levels, and check every connected I/O against the LC4064B datasheet. Because no authoritative pin-by-pin pinout was included in the supplied data, the pinout field is intentionally null rather than reproducing unverified pin names. This page consolidates verified distributor identifiers, package and speed information, sourcing links, replacement constraints, and practical selection guidance that are not available from a simple distributor search result alone. It also distinguishes verified facts from unavailable electrical details, helping engineers evaluate LC4064B-5T44C without mistaking generic CPLD assumptions for device-specific specifications.

RFC Hubungi kami
LC4064B-5T44I - 64-Macrocell 5ns In-System CPLD | Lattice
LC4064B-5T44I

LC4064B-5T44I - 64-Macrocell 5ns In-System CPLD | Lattice

The Lattice Semiconductor LC4064B-5T44I is a 64-macrocell, 5 ns SuperFAST high-density complex programmable logic device in a 44-pin TQFP package. It supports 3.3 V, 2.5 V and 1.8 V operation and provides in-system programmability for flexible logic implementation after board assembly. The device combines programmable logic, dedicated function inputs, and non-volatile configuration storage in a single integrated circuit. A complex programmable logic device, or CPLD, is a programmable-logic semiconductor positioned between fixed-function logic and FPGA implementation. A CPLD uses interconnected macrocells to implement Boolean equations, state machines, counters, interfaces, and control logic. Because LC4064B configurations are retained in non-volatile memory, the logic continues operating without a configuration device after programming. The LC4064B-5T44I's headline characteristics are its 64 macrocells, 5 ns speed grade, 44-pin TQFP package, and support for 3.3 V, 2.5 V and 1.8 V supply voltages. The 5 ns grade is intended for designs requiring faster combinational and clocked logic than slower commercial alternatives. Its 44-pin package also offers a smaller board footprint than many high-pin-count PLD packages. The in-system programming capability allows the device to be configured through its programming interface while connected to the target circuit. This supports production programming, field updates, and design revisions without removing the IC from the board. The manufacturer classifies the LC4064B family as a SuperFAST high-density PLD, indicating an architecture aimed at higher logic density and performance than the original Lattice CPLD generation. Typical uses include industrial control, data-acquisition systems, communication equipment, test and measurement instruments, embedded control, interface logic, and general-purpose glue logic. The device is particularly appropriate when a design needs a stable 5 ns timing grade, retained configuration, and programmable logic without the resource requirements of a larger FPGA. Designers should verify the exact pinout, supported I/O standards, bank supply requirements, AC timing characteristics, and configuration interface against the manufacturer datasheet before layout release. Because the available verified results identify the package and basic device characteristics but do not provide the complete electrical tables or pin assignments, those details remain to be confirmed rather than inferred. This page consolidates the verified distributor descriptions, source links, application-oriented engineering guidance, and clearly identified data gaps for LC4064B-5T44I. It adds practical selection context without presenting unverified electrical limits, pricing, or pin assignments as manufacturer facts.

RFC Hubungi kami
LC4064B-5T48C - 64-Macrocell 400 MHz CPLD | Lattice
LC4064B-5T48C

LC4064B-5T48C - 64-Macrocell 400 MHz CPLD | Lattice

Lattice Semiconductor LC4064B-5T48C is a 64-macrocell in-system-programmable SuperFAST high-density PLD with a maximum operating frequency of 400 MHz, 2.5 ns propagation delay, and a 48-pin TQFP package. The device supports 3.3 V, 2.5 V, and 1.8 V in-system-programmable operation for compact logic, interface, and control designs. A complex programmable logic device, or CPLD, belongs to the FPGA and CPLD branch of programmable-logic semiconductors. Unlike a mask-programmed fixed logic device, a CPLD retains a user-programmable configuration and combines programmable logic blocks with interconnect resources. The LC4064B family targets designs requiring deterministic timing, rapid field configuration, and moderate logic density without the resource and cost of a large FPGA. Key features include 64 macrocells, up to four global clock pins, programmable clock-polarity control, and as many as 80 product-term outputs per macrocell. Its 400 MHz maximum operating frequency and 2.5 ns propagation delay provide useful timing margin for address decoding, state-machine control, bus arbitration, data routing, peripheral interfacing, and general-purpose glue logic. In-system programmability allows configuration updates without removing the device from the assembled board. The LC4064B architecture provides dedicated macrocell logic and programmable routing in a single package. Global clocks can support multiple clock domains, while programmable polarity control helps align rising- or falling-edge logic with external interfaces. Because the verified data identifies the device as a high-density PLD but does not provide detailed I/O counts or timing tables, board-level timing closure must be completed with the manufacturer datasheet and the selected system architecture. Typical uses include industrial control, peripheral expansion, data-acquisition systems, communications equipment, test-and-measurement instruments, and embedded processor support. The 48-pin TQFP package is also appropriate for prototypes and production boards where a conventional surface-mount footprint is preferred over a fine-pitch BGA. Configuration storage and programming requirements should be evaluated during system design. For a new layout, verify every pin against the manufacturer datasheet and confirm the configuration device, clock source, and I/O voltage. The available web results explicitly confirm the 48-pin TQFP construction but do not reproduce the complete numbered pin table; accordingly, no unverified pin names are assigned here. Distributor pricing was not published in the supplied results as of 2026-10-28, so commercial availability requires a current quote. This page consolidates the verified 400 MHz performance, 2.5 ns delay, 64-macrocell density, voltage options, package information, family alternatives, and practical design considerations into an engineer-oriented selection guide. It also distinguishes confirmed manufacturer-family data from parameters that still require verification from the full datasheet.

RFC Hubungi kami
LC4064B-5T48I - 64-Macrocell 5ns ISP CPLD | Lattice
LC4064B-5T48I

LC4064B-5T48I - 64-Macrocell 5ns ISP CPLD | Lattice

Lattice Semiconductor LC4064B-5T48I is a 64-macrocell SuperFAST high-density CPLD with 32 I/O, a 5 ns speed grade, in-system programmability, and a 48-pin TQFP surface-mount package. It supports 3.3 V, 2.5 V, and 1.8 V operation, making it suitable for modern logic interfaces that require flexible interconnect and configuration after PCB assembly. A complex programmable logic device, or CPLD, belongs to the programmable-logic hierarchy: programmable logic device > CPLD > reconfigurable digital logic > semiconductor. It combines programmable AND-array logic, dedicated macrocells, and user-programmable interconnect to implement control, decoding, interface, and glue logic. Unlike a mask-programmed fixed function IC, a CPLD can be configured from a stored programming file, allowing design revisions without changing the PCB. The LC4064B includes 64 macrocells and 32 I/O according to the verified product listing. Its 5 ns speed designation supports deterministic propagation performance in control paths, bus arbitration, state machines, and peripheral interfacing. In-system programmability allows configuration through the same board after fabrication, reducing assembly rework and supporting field updates when the programming interface is retained. The device belongs to the ispMACH 4000B family and is described by Lattice Semiconductor as a 3.3 V, 2.5 V, and 1.8 V in-system programmable SuperFAST high-density PLD. Its 48-LQFP package provides 32 user I/O in a surface-mount footprint, making it practical for automated assembly and prototypes that need both programmable logic and a conventional fine-pitch package. Typical uses include industrial control and automation, communication-interface logic, test and measurement equipment, embedded system peripheral expansion, and general-purpose digital prototyping. In these systems, the CPLD can consolidate address decoding, handshake sequencing, latch logic, and protocol adaptation while avoiding the development cycle associated with a custom ASIC. Designers should verify the power-supply topology, I/O voltage limits, configuration pins, and programming source against the manufacturer datasheet before layout. The verified data identifies a -40 °C to +105 °C junction-temperature range and a 48-LQFP package, but does not provide the complete pin table, absolute maximum ratings, recommended decoupling, or AC timing values in the supplied records.

RFC Hubungi kami
LC4064B-75T44C - 64-Macrocell 168MHz CPLD | Lattice
LC4064B-75T44C

LC4064B-75T44C - 64-Macrocell 168MHz CPLD | Lattice

The Lattice Semiconductor LC4064B-75T44C is a SuperFAST high-density complex programmable logic device with 64 macrocells, a maximum operating frequency of 168 MHz, and a 44-pin TQFP package. It belongs to the ispMACH 4000B family, whose in-system-programmable architecture supports 3.3 V, 2.5 V, and 1.8 V operation for adaptable logic-density and industrial designs. The 44-pin package is supplied in a tray for prototype, automated production, and low-to-medium volume assembly. A complex programmable logic device, or CPLD, is a programmable digital logic IC that combines multiple sum-of-products logic blocks with a non-volatile configuration memory. A CPLD sits between simple fixed-function gates and FPGAs in the digital-logic hierarchy: it provides faster and more deterministic routing than many FPGAs, retains its configuration after power removal, and offers in-system programmability. The LC4064B-75T44C therefore suits control logic, bus arbitration, state machines, address decoding, interface bridging, and legacy peripheral replacement. Key characteristics include 64 macrocells, a 168 MHz maximum operating frequency, and compatibility with 3.3 V, 2.5 V, and 1.8 V supply configurations in the 4000B family. The -75 speed designation identifies the 168 MHz performance grade, while T44 identifies the 44-pin TQFP package. The C suffix identifies the commercial temperature option. These distinctions make the complete MPN important when matching an existing design, since changing the speed grade, package, or temperature grade can alter board compatibility, timing, and sourcing requirements. The ispMACH 4000 architecture blends the structures of the ispLSI 2000 and ispMACH 4A families. Its macrocell-based organization supports combinational and sequential logic, dedicated product-term logic, embedded memory resources, and clocked registers. Designers use the Lattice development environment and isp programmer cables or JT programming methods to create, verify, and download designs. Because the configuration is non-volatile, the device begins operating from its stored logic immediately after power-up without an external configuration PROM. Typical uses include industrial control panels, data-acquisition modules, legacy peripheral controllers, communication-interface logic, instrumentation, test equipment, and embedded system glue logic. The 44-pin TQFP footprint also makes the device practical for designs that require more I/O than a very small package can offer while avoiding the larger footprint of a 100-pin device. When planning a layout, assign every pin according to the manufacturer pin-description table and reserve routing space for programming signals, clock inputs, and configuration access. Decoupling requirements, operating-voltage limits, and unused-pin handling should be taken directly from the LC4064B datasheet. Timing closure must be checked against the selected -75 speed grade and the actual system clock rather than inferred only from the family headline frequency. This page combines the device architecture, package and speed information, drop-in family options, application guidance, comparison parameters, and practical layout considerations in one engineering-focused reference. It also identifies where package, timing, and lifecycle information must be confirmed before an engineering release or production transition.

RFC Hubungi kami
LC4064B-75T44I - 64-Macrocell 7.5ns CPLD | Lattice Semiconductor
LC4064B-75T44I

LC4064B-75T44I - 64-Macrocell 7.5ns CPLD | Lattice Semiconductor

The Lattice Semiconductor LC4064B-75T44I is a 64-macrocell in-system programmable complex programmable logic device with a 7.5 ns maximum propagation delay, operating from a 2.5 V supply in a 44-pin TQFP package. It belongs to the ispMACH 4000B family, which combines programmable logic, registers, and dedicated resources for compact, high-speed control and interface designs. A complex programmable logic device, or CPLD, is a programmable digital semiconductor that sits between fixed-function logic and an FPGA in the design hierarchy. A CPLD combines a programmable AND-array with a programmable OR-array, providing deterministic routing, nonvolatile configuration storage, and fast logic implementation without an external configuration device. The ispMACH 4000B architecture places 64 macrocells in four logic array blocks for designs requiring moderate logic density and high pin-to-pin performance. Key characteristics include 64 macrocells, four logic array blocks, a 7.5 ns speed grade, and 2.5 V operation. The 44-TQFP surface-mount package provides 44 external connections for power, configuration, clock, and user I/O. In-system programming allows the device to be configured through its programming interface without removing it from the circuit, supporting production programming, field updates, and prototype reconfiguration. The LC4064B-75T44I is suited to designs where predictable propagation delay and compact implementation are more important than very high logic density. Its macrocell-based architecture supports combinational and registered logic, state machines, bus arbitration, address decoding, interface control, and low-latency glue logic. Device configuration is retained in nonvolatile memory, so the implemented logic remains available after power is removed and re-applied. Typical uses include industrial control modules, peripheral controllers, data-acquisition front ends, communication equipment, and embedded system support logic. The 7.5 ns grade is appropriate for synchronous control paths and moderately clocked interfaces, while the 64-macrocell capacity provides room for decoding, handshake logic, and state-machine implementations. Its industrial-temperature ordering option also suits equipment designed for extended environmental duty. Designers should confirm the exact supply-voltage range, pin-level I/O limits, configuration timing, and unused-pin requirements in the Lattice Semiconductor datasheet and package drawing. PCB layout should provide a short, continuous ground plane, decouple each supply rail locally, and route configuration and clock signals away from noisy switching nodes. Use the ispMACH implementation flow and timing constraints to validate every registered path before programming hardware. This page combines the verified device identity, package information, architecture details, replacement candidates, comparison parameters, and practical design guidance in one engineering-focused reference. It also highlights where engineers must consult the original manufacturer documentation for exact pin assignments, timing tables, and power specifications.

RFC Hubungi kami
LC4064B-75T48C - 64-Macro, 7.5 ns CPLD | Lattice Semiconductor
LC4064B-75T48C

LC4064B-75T48C - 64-Macro, 7.5 ns CPLD | Lattice Semiconductor

Lattice Semiconductor LC4064B-75T48C is a 64-macro-cell complex programmable logic device with a 7.5 ns speed designation, supplied in a 48-pin TQFP package. It belongs to the Super Fast High Density PLD family and provides in-system programmable logic for consolidating multiple fixed-function digital functions into one configurable device. A complex programmable logic device, or CPLD, is a user-programmable semiconductor placed in the hierarchy between simple programmable logic devices and larger FPGAs. Its internal macro cells are organized into programmable logic blocks connected through a fixed interconnect structure. This architecture is useful when a design needs combinatorial and sequential logic, flexible pin assignment, and in-system reconfiguration without the resource cost of a much larger FPGA. The LC4064B-75T48C is identified by three principal ordering characteristics: 64 macro cells, a 7.5 ns device speed designation, and a 48-pin TQFP package. The 7.5 ns designation represents the device’s speed class within the LC4064B family and should be considered alongside the complete timing specifications when designing synchronous interfaces. The TQFP package provides a surface-mount format suitable for compact PCB assemblies and automated production. The Super Fast High Density PLD architecture is intended for glue-logic, control, decoding, interface adaptation, and embedded control applications. Its fixed internal interconnect can provide predictable routing for registered state machines, address decoding, bus control, and peripheral bridging. Because programming is nonvolatile and in-system programmable, the same PCB can support configuration changes without replacing the component. Typical uses include industrial control logic, data-acquisition systems, communication-interface conditioning, legacy peripheral emulation, and compact embedded-control boards. The 48-pin package is particularly useful when a design needs moderate I/O capacity and a conventional fine-pitch surface-mount footprint without moving to a larger ball-grid-array package. Existing LC4064 architectures can also be migrated among compatible speed grades after timing, power, and temperature requirements are checked. A primary design consideration is timing closure. Engineers should use the manufacturer’s device data and pin-description tables to establish clock, setup, hold, and propagation limits rather than treating the 7.5 ns ordering code as a complete timing specification. PCB layout should preserve short clock paths, provide clean return paths for supply and ground, and route sensitive signals away from noisy switching nodes. This product record combines the exact ordering information, package identity, family descriptions, sourcing references, and cross-reference findings for LC4064B-75T48C. It also identifies device-family alternatives and separates confirmed replacement candidates from variants that require design-specific validation.

RFC Hubungi kami
LC4064B-75T48I - 64-Macrocell 7.5ns CPLD | Lattice
LC4064B-75T48I

LC4064B-75T48I - 64-Macrocell 7.5ns CPLD | Lattice

The Lattice Semiconductor LC4064B-75T48I is a 64-macrocell complex programmable logic device with a 7.5 ns maximum delay and in-system programmability, housed in a 48-pin TQFP package. It supports 1.8 V, 2.5 V, and 3.3 V operation, making it a programmable logic option for compact digital control, interface, and signal-routing designs. A complex programmable logic device, commonly called a CPLD, combines programmable AND/OR logic structures with a non-volatile configuration architecture. Within the broader semiconductor hierarchy, a CPLD sits between simple programmable logic arrays and larger FPGAs. It is used where deterministic timing, compact implementation, and non-volatile logic configuration are more important than the very high logic density available in an FPGA. The LC4064B-75T48I provides 64 macrocells, a 7.5 ns speed designation, and in-system programming. Its 1.8 V, 2.5 V, and 3.3 V core-voltage choices allow the device to be integrated with systems using more than one common logic-voltage range. The 48-pin TQFP package also provides a conventional surface-mount format for automated assembly and prototype-board construction. The -75 suffix identifies the 7.5 ns speed grade, while the -48I ordering code corresponds to the 48-pin industrial-temperature option. The I designation identifies the extended industrial temperature range. For timing-critical designs, engineers should treat the 7.5 ns value as the device speed designation and use the manufacturer datasheet for individual path-delay, setup, hold, and AC-parameter limits rather than assuming that every signal path has identical delay. Typical uses include industrial control logic, peripheral interface decoding, data-routing networks, embedded control glue logic, and legacy system upgrades. The device is especially relevant when a design requires a non-volatile programmable logic solution with moderate density, predictable package availability, and in-system configuration capability. PCB design should preserve the device's required power, ground, configuration, clock, and I/O routing according to the manufacturer datasheet. Because the LC4064B is an older programmable-logic family, engineers should verify tool support, JEDEC programming-file compatibility, and the availability of a suitable design compiler before committing new production hardware. This page combines the core device identity, operating options, drop-in replacement candidates, comparison parameters, and implementation guidance. It also highlights the practical checks needed when programming files, industrial-temperature requirements, package fit, and replacement timing ratings must all be evaluated together.

RFC Hubungi kami
LC4064C-10T44I - 64-Macro 10ns In-System CPLD | Lattice
LC4064C-10T44I

LC4064C-10T44I - 64-Macro 10ns In-System CPLD | Lattice

Lattice Semiconductor LC4064C-10T44I is a 64-macro, 10 ns in-system-programmable complex programmable logic device packaged in a 44-pin TQFP. It belongs to the SuperFAST high-density PLD family and supports 3.3 V, 2.5 V, and 1.8 V operation, making it suitable for compact control, interface, glue-logic, and system-support functions. A complex programmable logic device, or CPLD, is a programmable semiconductor that combines multiple programmable logic blocks into one integrated device. In the broader hierarchy, a CPLD is a programmable logic device and a semiconductor, sitting between fixed-function logic and larger field-programmable gate arrays. Its principal advantage is nonvolatile configuration retention, allowing a programmed design to operate without a separate configuration controller after power-up. The LC4064C family combines 64 logic macros with a 10 ns speed designation. The macros can be interconnected to implement control logic, address decoding, state machines, data routing, interface adaptation, and other combinational or sequential functions. Because the configuration is stored in the device, the LC4064C-10T44I is useful where fast startup, deterministic operation, and logic integration are more important than the very large logic capacity of an FPGA. The device supports 3.3 V, 2.5 V, and 1.8 V supply arrangements, allowing the same programmable logic platform to be used across multiple board-level voltage environments. Its in-system-programmable characteristic supports configuration or reprogramming within the target system rather than requiring removal for separate programming. The 44-pin TQFP package also provides a surface-mount option for designs constrained by board area. Typical applications include industrial control interfaces, peripheral glue logic, power-management sequencing, communications-interface adaptation, test and measurement control, and embedded system support functions. In these systems, the LC4064C can consolidate fixed logic that would otherwise occupy multiple conventional ICs while preserving a compact, reconfigurable implementation. Design decisions should focus on timing closure, available I/O, supply selection, and the power and pin requirements of the selected package. The 10 ns speed grade indicates a substantially faster operating target than slower-rated members of the family, but exact setup and hold limits must be taken from the manufacturer datasheet for the selected clock, I/O mode, and voltage configuration. This product record combines the confirmed 64-macro, 10 ns, 44-TQFP characteristics with package-aware alternatives and practical implementation guidance. It is intended to help engineers determine whether this CPLD fits a specific control or interface design without confusing a genuine pin-compatible replacement with a device that merely serves a similar logic function.

RFC Hubungi kami
LC4064C-10T48I - 64-Macrocell 125MHz CPLD | Lattice
LC4064C-10T48I

LC4064C-10T48I - 64-Macrocell 125MHz CPLD | Lattice

The Lattice Semiconductor LC4064C-10T48I is an ispMACH 4000C-family CPLD with 64 macrocells, a 125 MHz maximum operating frequency, and 1.8 V operation in a 48-pin TQFP tray package. It is designed for compact, deterministic logic implementations where non-volatile configuration, in-system programmability, and a modest number of I/O resources are required. A complex programmable logic device is a programmable digital logic IC that combines an array of programmable logic and interconnect resources with configuration memory. Within the broader semiconductor hierarchy, the LC4064C belongs to the CPLD class, then to programmable logic devices and digital logic ICs. Unlike a mask-programmed PAL or GAL device, its logic configuration can be loaded or changed by a programmer, making it useful for prototyping, control, glue logic, and compact system integration. The LC4064C-10T48I provides 64 macrocells and a stated 125 MHz maximum operating frequency in the 4000C family. Its in-system-programmable architecture supports 3.3 V, 2.5 V, and 1.8 V device variants identified in the family documentation. The 48-pin TQFP package is a surface-mount format with 0.5 mm pitch, and the exact ordering code denotes tray packaging with an industrial temperature designation. The 4000C architecture combines programmable logic blocks with dedicated input and output structures, global clock resources, and programmable interconnect. This allows several related state machines, decoding functions, counters, and interface control functions to be consolidated in one device. Its deterministic CPLD implementation can also simplify timing analysis compared with a general-purpose microcontroller configuration containing multiple peripherals and interrupt paths. Typical uses include industrial control and factory automation, instrument-panel logic, sensor conditioning, power-system sequencing, communications interface control, and embedded control support. In each case, the device is useful when the logic must be retained non-volatile, the design must boot without executing a firmware image, or a small deterministic controller is needed close to the associated interface circuitry. PCB design should preserve the TQFP-48 land pattern, route programming access signals away from sensitive analog or high-speed nets, and validate all I/O assumptions against the device pin-description table. Because the documented architecture and I/O behavior determine the final system timing and power budget, designers should also check the manufacturer datasheet for electrical limits, clock requirements, and programming recommendations before release to production. This product page consolidates the verified device identity, package information, programming characteristics, lifecycle status, and drop-in candidates into an engineering-focused reference. It also adds practical design notes, parameter comparisons, and sourcing guidance intended to make legacy CPLD evaluation and replacement planning faster.

RFC Hubungi kami
LC4064C-25T44C - 64-Macrocell 2.5ns CPLD | Lattice
LC4064C-25T44C

LC4064C-25T44C - 64-Macrocell 2.5ns CPLD | Lattice

The Lattice Semiconductor LC4064C-25T44C is a 64-macrocell SuperFAST high-density complex programmable logic device with a maximum propagate delay of 2.5 ns, 30 user I/O pins, and support for 3.3 V, 2.5 V, and 1.8 V operation in a 44-pin TQFP surface-mount package. Its in-system programmability allows a board to be configured or reconfigured without removing the device. A complex programmable logic device is a programmable digital IC that combines AND-array logic, OR-array logic, and programmable interconnect in a single non-volatile architecture. Within the broader semiconductor hierarchy, a CPLD sits between fixed-function logic gates and field-programmable gate arrays. It offers deterministic timing, low power consumption, and simple architecture for glue logic, control logic, bus decoding, and interface adaptation. Key features of the LC4064C-25T44C include 64 macrocells, 30 user I/O pins, a 2.5 ns maximum propagate delay, and a 400 MHz device-class speed designation. In-system programmability supports field updates, while the 1.8 V, 2.5 V, and 3.3 V supply options accommodate mixed-voltage system designs. The 44-pin TQFP package provides a manageable pin count for compact control and interface boards. The -25C ordering option identifies the 2.5 ns performance grade, while the -T44C suffix identifies the 44-pin TQFP configuration and commercial temperature designation. Because the device uses a deterministic macrocell structure, timing behavior and routing remain predictable after programming. This makes the LC4064C useful when a design must implement several decoder and control functions while retaining a single, compact integrated package. Typical applications include peripheral bus decoding, address and command register logic, industrial control interfaces, legacy glue logic, and programmable signal conditioning. The 30 user I/O pins are sufficient for multi-bit data buses and control lines, while in-system programmability simplifies board bring-up and field configuration changes. The device can also serve as a companion controller in systems where an FPGA or microcontroller handles the primary processing function. When designing a PCB for this CPLD, assign the power, ground, programming, and user I/O pins directly from the manufacturer pin-description table. Keep the in-system programming interface accessible, follow the recommended bypass-capacitor placement, and confirm signal-scheme compatibility for 1.8 V, 2.5 V, or 3.3 V operation before releasing the layout. This page consolidates device characteristics, family-level alternatives, and practical implementation guidance. It also organizes the information an engineer normally has to piece together from the datasheet, distributor listings, and cross-reference resources when planning a CPLD replacement or control-logic redesign.

RFC Hubungi kami
LC4064C-25T48C - 64-Macrocell 2.5 ns CPLD | Lattice Semiconductor
LC4064C-25T48C

LC4064C-25T48C - 64-Macrocell 2.5 ns CPLD | Lattice Semiconductor

The Lattice Semiconductor LC4064C-25T48C is an ispMACH 4000C complex programmable logic device with 64 macrocells, a 2.5 ns typical propagation delay, 32 user I/O pins, and a 48-pin TQFP package. It belongs to the SuperFAST high-density PLD family and supports 3.3 V, 2.5 V, and 1.8 V in-system-programmable devices. A complex programmable logic device, or CPLD, is a user-programmable semiconductor that combines nonvolatile configuration memory, programmable logic, and I/O structures. In the broader hierarchy, the LC4064C is a CPLD, a programmable logic device, and a semiconductor. Its nonvolatile configuration allows the implemented control, interface, or glue logic to remain in the circuit without continuous configuration from an external processor after power-up. The LC4064C-25T48C provides 64 macrocells and 32 user I/O pins in a 7 x 7 mm surface-mount package. Its 2.5 ns speed designation is intended for designs requiring faster logic propagation than slower grades in the same device family. In-system programmability also permits configuration updates through the device programming interface, which is useful during manufacturing, prototyping, and field-update workflows. The part is identified by the LC4064C series, a -25 speed grade, and a T48 package code. The listed operating supply options include 3.3 V, 2.5 V, and 1.8 V, while the core supply range is identified as 1.65 V to 1.95 V. These options make the device relevant to mixed-voltage systems in which control logic interfaces with modern low-voltage digital rails. Typical uses include peripheral-interface bridging, bus decoding, industrial control logic, instrumentation, embedded system glue logic, and compact communication-equipment control blocks. The 32 user I/O pins can support interfaces that do not require the larger pin count of an FPGA, while the 64 macrocells provide substantially more logic capacity than small generic array logic devices. Designers should verify the exact I/O voltage, timing, pinout, and power requirements against the manufacturer datasheet before layout. Because a 48-pin TQFP has closely spaced leads, PCB routing should preserve adequate clearances and provide a continuous ground plane. Programming signals and configuration pins must also follow the manufacturer's recommended interface and termination guidance. This page organizes the device's programmable-logic characteristics, pin-compatible alternatives, application guidance, and engineering trade-offs into a practical selection reference. It also distinguishes the -25 speed grade from related device variants so engineers can assess lifecycle, timing, package, and replacement implications before committing a design.

RFC Hubungi kami
LC4064C-5T100C - SuperFAST High-Density CPLD | Lattice
LC4064C-5T100C

LC4064C-5T100C - SuperFAST High-Density CPLD | Lattice

Lattice Semiconductor Corporation LC4064C-5T100C is a SuperFAST high-density complex programmable logic device in a 100-pin TQFP package. It is an in-system programmable PLD designed for multi-voltage digital logic systems and supports 3.3 V, 2.5 V, and 1.8 V supply environments. Its -5 speed designation identifies it as the 5 ns performance grade within the LC4064C family. A complex programmable logic device, or CPLD, is a programmable digital semiconductor that combines multiple programmable logic blocks with a deterministic interconnect structure. The broader hierarchy is CPLD → programmable logic device → programmable logic → semiconductor. Unlike a software-driven processor, a CPLD executes its configured Boolean and sequential logic directly in hardware, providing deterministic response times and allowing design revisions through reprogramming. The LC4064C architecture provides a large platform for integrating control, interface, decoding, and glue-logic functions. Its family is identified as a SuperFAST high-density PLD, while the LC4064C part family supports 3.3 V, 2.5 V, and 1.8 V operation. This multi-voltage capability is useful when the device must interface with logic operating at different supply levels. Programming and configuration details must be implemented using the procedures and device support specified by Lattice Semiconductor. The -5 suffix denotes a nominal 5 ns speed grade. This timing classification is more useful than a generic clock-frequency claim because CPLD propagation and pin timing are specified across multiple operating conditions. System timing closure should therefore use the manufacturer's pin characteristics, AC test conditions, setup requirements, and hold requirements rather than treating the speed suffix as a standalone system-clock limit. Typical applications include industrial control and automation, general-purpose interface logic, data acquisition systems, consumer peripherals, communications equipment, and embedded control subsystems. In each case, the device can consolidate parallel logic, control sequencing, address decoding, state-machine behavior, and board-level interface functions into one programmable component while retaining a fixed pin-compatible hardware design between program revisions. The primary design consideration is exact footprint and timing validation. Confirm the physical TQFP-100 land pattern, pin assignments, supply rails, decoupling requirements, configuration interface, and I/O standards against the manufacturer datasheet before committing a PCB. Although the -5 grade provides strong timing performance, every external interface still requires propagation-delay and timing-margin analysis under the intended voltage, temperature, and load conditions. This product record combines the manufacturer device description, catalog identifiers, lifecycle information, and cross-reference candidates into an engineering-focused selection guide. It also distinguishes true package-compatible replacement candidates from comparisons that may require a different footprint, supply arrangement, programming file, or timing review. That practical distinction helps shorten sourcing and redesign evaluation for obsolete or end-of-life programmable-logic designs.

RFC Hubungi kami
LC4064C-5T100I - 64-Macrocell 1.8V CPLD | Lattice Semiconductor
LC4064C-5T100I

LC4064C-5T100I - 64-Macrocell 1.8V CPLD | Lattice Semiconductor

The Lattice Semiconductor LC4064C-5T100I is a discontinued 64-macrocell ispMACH 4000C complex programmable logic device with a 5 ns typical propagation delay, 227 MHz maximum operating frequency, and 1.8 V core supply. It is packaged in a 100-pin TQFP and is intended for industrial-temperature applications requiring nonvolatile, in-system reprogrammable logic. A complex programmable logic device, or CPLD, is a programmable logic semiconductor that combines multiple programmable logic blocks with a defined interconnect architecture. In the hierarchy of digital semiconductors, a CPLD belongs to programmable logic devices alongside FPGAs and PAL/GAL devices. The LC4064C provides deterministic timing, persistent configuration storage, and relatively simple design tools for glue logic, control logic, interface adaptation, and system-support functions. The device provides 64 macrocells and operates from a 1.65 V to 1.95 V internal core supply. Its 5 ns typical propagation delay supports operation up to 227 MHz, making it useful where conventional PAL and GAL logic is too slow. The ispMACH 4000 family supports in-system programming, allowing a board to be configured or updated without removing the device. The 100-pin TQFP package also provides ample external I/O for control, status, and data-path interfaces. The LC4064C family combines programmable logic blocks, programmable interconnect, configuration memories, and input/output structures in a single package. Because the configuration is nonvolatile, the implemented circuit remains present after power is removed and restored. This is valuable in industrial controllers, embedded equipment, communications interfaces, and legacy control systems that require deterministic behavior without continuous FPGA configuration overhead. Typical uses include industrial control and automation, communications-interface conditioning, test and measurement equipment, embedded peripheral control, and legacy system integration. In each case, the 64-macrocell capacity can consolidate multiple PAL-style functions into one device while preserving predictable propagation delays and a stable, reprogrammable design flow. PCB design must follow the manufacturer's pin-assignment and power-decoupling guidance, especially for the 1.8 V core rail, programming interface, clock inputs, and I/O reference requirements. Confirm the industrial-temperature operating limits and signal standards of the exact board before migration. Because this orderable has been discontinued, obsolete-board repair and design-for-migration programs should verify stock, traceability, and the availability of an active successor before committing a production release. This page combines the documented device characteristics, lifecycle status, same-package replacement context, and practical implementation guidance needed to assess the LC4064C-5T100I during legacy CPLD repair, redesign planning, and drop-in compatibility assessment.

RFC Hubungi kami
LC4064C-5T44C - 64-Macrocell 5 ns CPLD | Lattice Semiconductor
LC4064C-5T44C

LC4064C-5T44C - 64-Macrocell 5 ns CPLD | Lattice Semiconductor

Lattice Semiconductor LC4064C-5T44C is a 64-macrocell in-system-programmable CPLD with a 5 ns speed grade, a maximum operating frequency of 227 MHz, and a 1.8 V supply option in a 44-pin TQFP package. It belongs to the ispMACH 4000C family of SuperFast high-density programmable logic devices, combining deterministic combinational logic, programmable output routing, global clock distribution, and in-system programmability in one surface-mount package. A complex programmable logic device is a semiconductor in the FPGA and CPLD family of programmable logic devices. Compared with a mask-programmable PAL or GAL, a CPLD stores its configuration in nonvolatile memory, allowing the logic design to be changed after manufacture. The LC4064C-5T44C supports 1.8 V, 2.5 V, and 3.3 V operation, making it suitable for systems that need flexible logic density without an external configuration PROM. Key features include 64 macrocells, a 5 ns speed designation, a listed maximum operating frequency of 227 MHz, and a listed propagation delay of 2.5 ns. The device provides up to four global clock pins with programmable clock polarity. These features support fast control paths, interface adaptation, bus arbitration, state-machine implementation, and glue logic where deterministic timing is more important than very high programmable-logic capacity. The SuperFAST architecture is intended for high-density logic implementations with predictable routing and dedicated global-clock resources. In-system programmability allows a PCB to be programmed or reprogrammed during production, test, or field updates without a dedicated programming socket or separate memory device. Designers must still verify the exact I/O standards, supported supply combinations, timing constraints, and electrical limits against the manufacturer datasheet before finalizing a PCB. Typical uses include industrial control and automation, communication-interface bridging, data-acquisition conditioning, embedded system control, test-equipment logic, and compact peripheral controllers. Its 64-macrocell capacity is most useful when a design needs several counters, state machines, address decoders, bus arbiters, or protocol converters but does not require the routing flexibility and logic capacity of a large FPGA. For a new design, preserve the 44-pin TQFP footprint and verify signal directions and pin multiplexing against the exact device variant. Account for supply-voltage and I/O-standard compatibility, use the manufacturer's recommended programming and termination practices, and validate timing with the actual external clock, loading, and operating-temperature conditions. The 5 ns speed grade should not be treated as a guarantee that every unregistered signal path meets the same timing. This page combines the verified device identity, package and speed information with practical selection guidance, design notes, and clearly qualified same-family replacement candidates. It also distinguishes confirmed public data from specifications that still require confirmation from the manufacturer datasheet or device-specific qualification records.

RFC Hubungi kami
LC4064C-5T44I - 64-Macrocell 5 ns CPLD | Lattice Semiconductor
LC4064C-5T44I

LC4064C-5T44I - 64-Macrocell 5 ns CPLD | Lattice Semiconductor

The Lattice Semiconductor LC4064C-5T44I is a 64-macrocell in-system-programmable CPLD from the ispMACH 4000C family, specified with a 5 ns propagation delay and housed in a 44-pin TQFP package. It operates with 3.3 V, 2.5 V, and 1.8 V in-system programming support according to the verified product result, while the related component listing identifies 30 I/O pins and an extended junction-temperature range of -40°C to 105°C. The device is intended for designs requiring deterministic programmable logic, compact pin count, and a relatively fast 5 ns speed grade. A CPLD is a programmable-logic device within the broader FPGA and CPLD hierarchy. Its internal macrocells and programmable interconnect are configured to implement combinational and registered logic functions, making it useful for control logic, interface adaptation, glue logic, signal conditioning, and system-level sequencing. Compared with a discrete gate-array implementation, a CPLD allows the logic map, interconnections, and I/O behavior to be changed without changing the PCB layout. The verified LC4064C-5T44I information identifies 64 macrocells, four internal logic blocks, a 5 ns propagation-delay grade, 30 I/O pins, in-system programmability, and a 44-pin TQFP package. The 5 ns speed grade is the principal selection criterion for timing-sensitive control paths. The -40°C to 105°C junction-temperature specification supports industrial temperature-range designs, provided that the package, power dissipation, and system thermal limits are evaluated together. Typical uses include industrial control, communication-interface logic, peripheral bridging, and compact embedded control systems. In these applications, the CPLD can consolidate multiple fixed-function gates into one configurable device, reduce the number of discrete ICs, and provide a hardware upgrade path when interface requirements change. The principal design consideration is timing closure. Designers should use the device's published AC timing data, pin constraints, and power-supply requirements from the manufacturer datasheet rather than relying only on the 5 ns headline number. The PCB must also provide a clean programming interface and adequate routing for the selected I/O standards. This page combines the verified distributor and manufacturer-result specifications with selection guidance, design cautions, and sourcing context. It does not infer undocumented electrical limits, pricing, pin assignments, or lifecycle claims that are absent from the supplied verification data.

RFC Hubungi kami
LC4064C-5T48C - 64-Macrocell, 5ns In-System CPLD | Lattice
LC4064C-5T48C

LC4064C-5T48C - 64-Macrocell, 5ns In-System CPLD | Lattice

The Lattice Semiconductor LC4064C-5T48C is a 64-macrocell in-system programmable complex programmable logic device with a 5 ns propagation delay, up to 400 MHz maximum operating frequency, and 3.3 V, 2.5 V, and 1.8 V supply support. It is supplied in a 48-pin TQFP package for surface-mount PCB assembly. A CPLD is a programmable logic device that combines a structured array of programmable logic blocks with nonvolatile configuration storage. In the product hierarchy, a CPLD is a programmable-logic semiconductor, a higher-level alternative to a fixed combinational logic implementation and a lower-complexity member of the FPGA and CPLD family. In-system programmability allows the LC4064C-5T48C to be configured or reconfigured through the system programming interface without removing it from the circuit board. The LC4064C-5T48C provides 64 macrocells, a 5 ns propagation delay, and a maximum operating frequency of up to 400 MHz. Its I/O structure supports programmable clock polarity and up to four global clock pins, while its output architecture can address up to 80 product-term outputs. These features make the device suitable for glue logic, control logic, protocol bridging, and fixed-function logic that benefits from field configuration. The device is identified by the manufacturer as a SuperFAST high-density PLD in the 3.3 V, 2.5 V, and 1.8 V in-system programmable family. This combination of speed, logic density, and multiple supported supply voltages provides design flexibility across embedded control, communications, industrial, and consumer systems. The manufacturer documentation describes the 48-pin package as a TQFP, while distributor records identify the same 48-LQFP package terminology. Typical applications include bus-interface decoding, state-machine control, peripheral interconnect logic, data-format conversion, board-level timing control, and embedded system start-up sequencing. The five-nanosecond propagation-delay grade is useful where combinational decisions must be made within short system timing windows, while the 400 MHz maximum operating figure supports designs clocked at higher system frequencies subject to the device's timing constraints. Designers should verify the exact I/O standards, input thresholds, output drive, configuration interface, and AC timing against the manufacturer datasheet for the selected supply voltage and operating conditions. PCB layout should provide a short, clean programming path, adequate ground-plane continuity, and decoupling close to the supply pins. Because this page relies on the supplied web records rather than the complete manufacturer timing tables, unspecified electrical details are marked for verification rather than inferred. This page consolidates the verified 64-macrocell, 5 ns, 400 MHz, 48-pin TQFP, clocking, and programming attributes with distributor inventory, source links, candidate same-footprint alternatives, and application-oriented engineering guidance. That synthesis makes the LC4064C-5T48C easier to evaluate for design feasibility, sourcing, and PCB compatibility.

RFC Hubungi kami
LC4064C-5T48I - 64-Macrocell 400 MHz CPLD | Lattice
LC4064C-5T48I

LC4064C-5T48I - 64-Macrocell 400 MHz CPLD | Lattice

Lattice Semiconductor LC4064C-5T48I is a 64-macrocell complex programmable logic device (CPLD) with a 400 MHz maximum operating frequency and 2.5 ns propagation delay. The device supports 3.3 V, 2.5 V, and 1.8 V supply configurations and is supplied in a 48-pin TQFP package. A complex programmable logic device is a user-programmable semiconductor that combines programmable logic arrays with a programmable interconnect. A CPLD occupies the functional hierarchy between basic fixed-function logic and an FPGA: it retains the Electrically Erasable Programmable ROM architecture while offering deterministic timing, comparatively simple design entry, and in-system programmability. This makes the LC4064C suitable for control logic, bus arbitration, interface translation, and glue logic rather than general-purpose processor execution. The LC4064C provides up to four global clock pins with programmable clock polarity control. Its output macrocells can drive as many as 80 product terms per output, allowing moderately dense combinational and registered logic to be consolidated into one package. The 400 MHz fMAX and 2.5 ns tPD figures make it useful for clocked control paths and multi-clock designs requiring predictable propagation performance. The manufacturer identifies the LC4064C family as a 3.3 V, 2.5 V, and 1.8 V in-system programmable SuperFAST high-density PLD. Multi-voltage support allows the core and I/O structure to be evaluated against the system voltage plan, although exact core-versus-I/O voltage assignments must be confirmed in the manufacturer datasheet before PCB and power-tree design. Typical uses include peripheral interfacing, legacy bus decoding, clock-domain control, interrupt and glue logic, and embedded system sequencing. A microcontroller or FPGA can use the CPLD as a deterministic companion block for protocol conversion or signal conditioning without adding continuous processor overhead. Designers should reserve configuration pins and verify the supported programming interface, clocking topology, and I/O standards against the package pinout. Because the supplied search evidence confirms the 48-TQFP package but does not expose individual pin assignments, the PCB footprint and pin names must be verified against the official Lattice Semiconductor datasheet before layout release. This page combines the verified distributor specifications, same-package family comparisons, and application-oriented design guidance. It also separates documented performance data from parameters that still require confirmation from the full manufacturer datasheet, helping engineers evaluate the LC4064C-5T48I without treating unverified electrical details as guaranteed specifications.

RFC Hubungi kami
LC4064C-75T44C - 64-Macrocell 7.5ns CPLD | Lattice
LC4064C-75T44C

LC4064C-75T44C - 64-Macrocell 7.5ns CPLD | Lattice

The Lattice Semiconductor LC4064C-75T44C is an ispMACH 4000C-series CPLD with 64 macrocells, four logic blocks, and a maximum propagation delay of 7.5 ns in a 44-pin TQFP package. It supports in-system programming and is identified as a 3.3 V, 2.5 V, and 1.8 V SuperFAST high-density programmable logic device. A complex programmable logic device, or CPLD, belongs to the programmable-logic hierarchy that includes FPGAs. Unlike a software-programmed microcontroller, a CPLD stores a defined Boolean logic configuration in nonvolatile configuration memory. The LC4064C combines multiple logic blocks with a programmable interconnect, allowing fixed digital functions such as interface control, address decoding, state sequencing, and glue logic to operate predictably after configuration. The 64-macrocell architecture provides a practical balance between logic capacity and routing resources for compact control systems. Its 7.5 ns speed grade is suitable for clocked control logic, data acquisition, peripheral interfacing, and general-purpose digital subsystems. In-system programmability allows a board to be configured or updated through the device's programming interface, while the 44-pin TQFP package supports conventional surface-mount assembly. The device is associated with the Lattice ispMACH 4000C family and supports multiple supply-voltage configurations identified for the LC4064C family. Unlike a microcontroller with a processor core and executable software, this CPLD uses configurable logic blocks and fixed interconnect resources. This architecture can provide deterministic hardware behavior after configuration and can consolidate several discrete gates and counters into one programmable component. Typical applications include industrial control interfaces, test and measurement equipment, communications link control, embedded data-acquisition systems, power-system sequencing, and compact peripheral adapters. A design can implement parallel data capture, pulse-width generation, protocol framing, and status logic in one device when the required architecture fits the available macrocells and I/O resources. Design planning should begin with a complete pin assignment and timing review using the Lattice Semiconductor datasheet and the selected design toolchain. The PCB should preserve the device's required programming, configuration, clock, ground, and supply connections, while decoupling and layout should follow the package-specific recommendations. Programming files, pin constraints, timing constraints, and unused-pin treatment must be reviewed before fabrication. This page organizes the verified device identity, package, programming characteristics, speed grade, and practical design considerations while identifying family-based drop-in alternatives. It also distinguishes the LC4064C from the LC4064V, highlights speed-grade and temperature-suffix trade-offs, and provides comparison points that help engineers determine PCB, timing, and qualification impacts before approving a substitution.

RFC Hubungi kami
LC4064C-75T44I - 64-Macrocell 168MHz CPLD | Lattice Semiconductor
LC4064C-75T44I

LC4064C-75T44I - 64-Macrocell 168MHz CPLD | Lattice Semiconductor

Lattice Semiconductor LC4064C-75T44I is an in-system-programmable CPLD with 64 macrocells, a maximum operating frequency of 168 MHz, and a 1.8 V core supply in a 44-pin TQFP tray package. It belongs to the ispMACH 4000C family, which combines the architectures of ispLSI 2000 and ispMACH 4A to provide programmable logic for systems requiring deterministic control, interface translation, and compact logic consolidation. A CPLD, or complex programmable logic device, is a programmable semiconductor that combines multiple logic functions into one reconfigurable integrated circuit. In the broader hierarchy, a CPLD is a programmable logic device, a digital semiconductor, and a practical implementation of hardware description language designs. Its interconnect and macrocell architecture can implement combinational and sequential logic, allowing one package to replace networks of discrete gates, counters, decoders, and state machines. The LC4064C provides 64 macrocells and supports operation at frequencies up to 168 MHz. Its ispMACH architecture is designed for SuperFAST programmable logic applications, while in-system programming supports configuration within the target system rather than requiring a separate dedicated programming step. The device supports 3.3 V, 2.5 V, and 1.8 V operating arrangements identified in the family documentation, allowing implementation across multiple logic voltage levels. The 44-pin TQFP package provides a compact surface-mount footprint with leads on all four sides. This package arrangement is suitable for industrial and commercial PCB layouts where the design needs more general-purpose I/O than a very small programmable-logic package while retaining manageable board density. The -75 suffix identifies the device speed grade, and the I suffix identifies the industrial temperature option. Typical applications include bus-interface bridging, control-plane logic, industrial automation, data-acquisition control, legacy peripheral emulation, and general glue-logic consolidation. The 64-macrocell capacity is particularly useful when a design combines several address decoders, registers, counters, state machines, and interface control blocks that benefit from a single configurable implementation. Designers should confirm the exact pin assignment, supported I/O standards, configuration scheme, and power architecture against the manufacturer datasheet before layout release. PCB planning must preserve the package pin numbering and provide suitable power and ground distribution, while system timing should use the -75 speed grade as the device operating target. This page combines the LC4064C-75T44I device identity, package and timing information with focused alternatives, engineering guidance, and comparison criteria. It helps engineers identify genuine same-footprint replacements while separating exact functional choices from changes that require schematic, pinout, timing, or qualification review.

RFC Hubungi kami
LC4064C-75T48C - 400MHz 48-TQFP CPLD | Lattice Semiconductor
LC4064C-75T48C

LC4064C-75T48C - 400MHz 48-TQFP CPLD | Lattice Semiconductor

The Lattice Semiconductor LC4064C-75T48C is an in-system programmable Complex Programmable Logic Device in the ispMACH 4000C family, with a maximum operating frequency of 400 MHz, a 2.5 ns propagation delay, and a 48-pin TQFP package. It combines programmable logic, global clock distribution, and in-system programmability for compact control, interface, and signal-processing designs. A CPLD, or Complex Programmable Logic Device, is a programmable-logic semiconductor positioned between simple PAL/GAL devices and FPGAs. The LC4064C belongs to the broader hierarchy of programmable logic -> complex programmable logic device -> ispMACH family. Unlike a fixed-function logic circuit, it allows board designers to implement combinational and registered logic that can be revised through an in-system programming interface. The LC4064C-75T48C supports 3.3 V, 2.5 V, and 1.8 V operation according to its device description. Its 400 MHz maximum operating frequency and 2.5 ns propagation delay make it suitable for fast control paths, interface conditioning, protocol conversion, and state-machine logic. The device also provides up to four global clock pins with programmable clock polarity, helping distribute a common clock while supporting both rising- and falling-edge designs. The 48-pin TQFP package provides a conventional surface-mount footprint suitable for automated assembly and moderate I/O density. A surface-mount package reduces board height compared with many leaded logic packages, while its exposed perimeter leads support inspection and rework. The -75 suffix identifies the device speed grade, and the 48C portion identifies the package configuration used in the orderable MPN. Typical applications include industrial control, data acquisition, communication-interface bridging, test equipment, embedded system control, and general-purpose glue logic. The in-system programming capability is especially useful when a design must be updated after assembly or when multiple boards require the same programmable logic configuration. Designers should verify the complete pin description, power rails, and programming interface in the manufacturer datasheet before laying out a PCB. Input and output timing should be evaluated at the intended operating frequency, and unused pins should follow the datasheet's power, ground, or no-connect requirements. The maximum frequency is a device capability rather than a guarantee for every logic design.

RFC Hubungi kami
LC4064C-75T48I - 64-Macrocell 7.5 ns CPLD | Lattice Semiconductor
LC4064C-75T48I

LC4064C-75T48I - 64-Macrocell 7.5 ns CPLD | Lattice Semiconductor

The Lattice Semiconductor LC4064C-75T48I is an in-system-programmable CPLD with 64 macrocells, 7.5 ns propagation delay, 32 input/output pins, and a 48-TQFP surface-mount package. Designed for deterministic logic implementation, it supports 1.65 V operation and an industrial temperature range of -40°C to +105°C. A CPLD, or complex programmable logic device, is a semiconductor that combines programmable AND/OR logic structures with configuration memory. Within the product hierarchy, a CPLD is a programmable logic device, a digital semiconductor, and an alternative to a small FPGA for fixed or moderately changing glue-logic designs. The ispMACH 4000C family is intended to consolidate control logic, interface adaptation, state machines, and signal routing into one reconfigurable device. The LC4064C-75T48I provides four logic elements or blocks, 64 macrocells, and 32 I/O positions in a 48-TQFP package. Its 7.5 ns speed grade supports systems requiring predictable combinational and registered logic performance. In-system programming allows a board to be configured or updated without removing the device, while the industrial temperature rating supports factory automation, industrial control, communications, and embedded equipment. The C-series architecture provides 64 macrocells organized into four logic blocks, enabling moderately complex control functions in a non-volatile programmable logic device. Because the LC4064C family is a legacy CPLD, new designs should also consider device availability, programmer support, and migration options. The exact I/O standard, input thresholds, output drive, input rise/fall time, and configuration architecture should be confirmed in the manufacturer datasheet before final schematic and signal-integrity review. Typical uses include industrial interface controllers, encoder and pulse-processing logic, protocol bridging, control-plane routing, test-fixture sequencing, and embedded peripheral arbitration. The 32 available I/O pins are useful for moderate external connectivity, while the four logic blocks allow several related functions to be consolidated into a single programmable component. Its 48-TQFP package also provides a practical option for automated assembly and inspection. A critical design task is verifying every board-level electrical assumption against the exact datasheet, including mixed-voltage I/O behavior, power-supply sequencing, and programming signals. Place decoupling capacitors close to the supply pins, route programming and configuration signals away from high-speed switching nodes, and observe all absolute maximum and recommended operating conditions. PCB migration is only valid after checking the land pattern, pin functions, and power architecture. This page organizes lifecycle, package, electrical, application, and replacement information for engineering review. It also highlights same-footprint Lattice alternatives and their speed-grade or temperature-grade differences, helping teams evaluate whether a board can remain unchanged or requires qualification and layout review.

RFC Hubungi kami
LC4064V-10T44I - 64-Macrocell 3.3V CPLD | Lattice
LC4064V-10T44I

LC4064V-10T44I - 64-Macrocell 3.3V CPLD | Lattice

Lattice Semiconductor LC4064V-10T44I is an ispMACH 4000V complex programmable logic device with 64 macrocells, 30 user I/Os, a 3.3 V operating supply, and a TQFP-44 package. It belongs to the SuperFAST high-density PLD family and combines the architectures used in the ispLSI 2000 and ispMACH 4A families. The device supports in-system programming for 3.3 V, 2.5 V, and 1.8 V operation. A CPLD is a programmable logic device in the FPGA and CPLD hierarchy. Unlike a mask-programmed logic device, a CPLD retains its configuration in nonvolatile memory and can be reprogrammed during manufacturing, prototyping, or field updates. Its macrocell-based architecture provides deterministic combinational and registered logic implementation, making the LC4064V useful for control logic, interface translation, bus arbitration, and fixed-format signal processing. The -10 speed designation identifies a 125 MHz-class device in the ispMACH 4000V family, while the T44 suffix denotes the 44-pin TQFP package and the I suffix identifies the industrial temperature grade. The family information identifies 64 macrocells and a 3.3 V supply, with 30 available I/Os. These characteristics make the LC4064V-10T44I appropriate for compact industrial, communications, control, and legacy system designs requiring nonvolatile reconfiguration. The ispMACH 4000V architecture is intended for designs that need more logic density than small PAL devices without moving to a large FPGA. Its 125 MHz-class timing supports faster control paths than typical low-cost GAL and PAL logic. The TQFP-44 surface-mount package also provides a practical route for automated assembly and prototype fabrication where fine-pitch BGA packages would complicate inspection or rework. Typical applications include industrial control interfaces, peripheral bus controllers, status and sequencing logic, data-acquisition front ends, communications adapters, and embedded system glue logic. The 30-I/O configuration allows the device to bridge multiple digital interfaces while the nonvolatile configuration simplifies repeatable production and field reconfiguration. Board design must preserve the package footprint, programming interface, and supported I/O standards of the original LC4064V-10T44I. Verify signal voltage levels, unused pins, clock constraints, and programming voltage against the manufacturer datasheet. Because the exact pin names and complete electrical limits are not reproduced in the retrieved technical summaries, use the manufacturer pin-description table when assigning every package connection. This product record combines the exact manufacturer-family specifications, lifecycle information, drop-in cross-reference findings, and practical selection guidance. It also distinguishes confirmed TQFP-44 replacements from larger-package devices that are not direct PCB drop-ins, helping engineers evaluate replacements without confusing electrical equivalence with physical compatibility.

RFC Hubungi kami
LC4064V-10T48I - 64-Macrocell 125MHz CPLD | Lattice
LC4064V-10T48I

LC4064V-10T48I - 64-Macrocell 125MHz CPLD | Lattice

Lattice Semiconductor LC4064V-10T48I is a 64-macrocell complex programmable logic device (CPLD) with a maximum system frequency of 125 MHz, a 10 ns propagation-delay grade, and a 48-pin TQFP package. It operates from a 3.0 V to 3.6 V core supply and supports 3.3 V, 2.5 V, and 1.8 V in-system-programmable technology for interfacing with modern mixed-voltage systems. The industrial-temperature option is identified by the I suffix. A CPLD is a programmable-logic semiconductor that combines programmable AND/OR logic structures with nonvolatile configuration memory. In the product hierarchy, this device belongs to the ispMACH 4000V family of complex programmable logic devices. Compared with discrete programmable logic arrays, a CPLD provides denser integration, repeatable timing, and a unified configuration architecture. Its 64 macrocells make it suitable for consolidating control, interface, decode, and state-machine logic into one device. Key features include 64 macrocells organized into four logic blocks, 32 user I/O pins, a 125 MHz maximum frequency, and 10 ns propagation delay. The device also provides in-system programmability, allowing a programmed configuration to be updated through the system programming interface without removing the package from the PCB. Its 48-pin TQFP format is suitable for conventional surface-mount assembly and prototype or production boards requiring a moderate pin count. The ispMACH 4000 architecture is designed for predictable logic implementation, especially where several glue-logic functions must operate together at defined clock rates. The family documentation states that different density devices in the same package are designed to maintain the same pinout, supporting design migration between density options. This architecture makes the LC4064V useful when a design needs more integration than basic PAL devices while retaining nonvolatile, deterministic configuration behavior. Typical uses include industrial control and data-acquisition modules, communication interfaces, test and measurement equipment, embedded system peripheral consolidation, and compact instrumentation requiring programmable logic. The device can implement bus decoding, state machines, protocol bridges, counter and timer logic, and control functions while keeping the external processor focused on its primary application tasks. PCB design should preserve the device power and ground connectivity, provide the required bypass capacitance near the supply pins, and route programming signals away from high-speed switching nodes. Designers should also account for the 10 ns speed grade and the 125 MHz frequency ceiling when defining timing constraints, while confirming that every external interface operates within the selected I/O voltage range. This product page combines the device's electrical identity, package details, migration alternatives, comparison parameters, and practical implementation guidance. It also highlights the distinctions between speed grades and package variants so engineers can identify a genuine drop-in option without confusing a functional substitute with a PCB-compatible replacement.

RFC Hubungi kami