Produk (44,000+)

LFE2-20E-7F484C - 21K LUT ECP2 FPGA, 331 I/O | Lattice
LFE2-20E-7F484C

LFE2-20E-7F484C - 21K LUT ECP2 FPGA, 331 I/O | Lattice

The Lattice Semiconductor LFE2-20E-7F484C is an ECP2 field-programmable gate array (FPGA) providing 21,000 logic cells, 331 user I/O, and dedicated DSP resources in a 484-BBGA package. It is identified as a 1.2 V, -7 speed-grade device by distributor product data, making it suitable for designs requiring a moderately dense programmable logic fabric and substantial parallel I/O. An FPGA is a reprogrammable semiconductor in which the digital logic, interconnect, and programmable I/O blocks are configured after manufacture. Within the semiconductor hierarchy, the ECP2 belongs to the FPGA and CPLD category and to Lattice's ECP2 family. Unlike a fixed-function microcontroller, an FPGA can implement parallel datapaths, control logic, interfaces, and DSP pipelines in one device, allowing hardware behavior to be changed through a configuration bitstream. The verified product information identifies 21K LUTs, 331 I/O, DSP capability, a 1.2 V operating voltage, and a -7 speed designation. The 484-BBGA package also provides a large, mechanically dense footprint suited to boards with space for fine-pitch ball-grid-array routing. Because the supplied distributor data does not enumerate memory resources, embedded multipliers, configuration interfaces, or I/O standards, those details must be confirmed in the Lattice ECP2 family documentation before final schematic and PCB sign-off. Typical uses for a device in this resource class include industrial control and automation, communications infrastructure, embedded video and image processing, instrumentation, and multi-channel DSP-assisted signal processing. The 331-I/O count is especially useful for designs that must connect multiple buses, capture parallel data, or control a substantial number of external signals. The DSP resources allow selected arithmetic and filtering pipelines to be implemented in parallel rather than relying entirely on sequential processor execution. Board-level implementation should follow Lattice's published high-density BGA layout, power, and decoupling guidance. Differential pairs, clock inputs, and high-speed memory interfaces require controlled impedance, continuous return paths, and length matching; the 1.2 V core rail also requires careful sequencing and filtering. Because this MPN is reported as obsolete by one indexed source while distributor listings remain available, procurement planning should confirm lifecycle status, date codes, traceability, and current inventory before a new production release. This page consolidates distributor specifications, package identification, lifecycle signals, and same-family upgrade paths with practical implementation guidance. It also distinguishes confirmed parameters from details that require verification against the manufacturer documentation, helping engineers evaluate fit without treating distributor snippets as a substitute for the complete datasheet.

RFC Hubungi kami
LFE2-20E-7F672C - 21K LUT FPGA | Lattice Semiconductor
LFE2-20E-7F672C

LFE2-20E-7F672C - 21K LUT FPGA | Lattice Semiconductor

Lattice Semiconductor LFE2-20E-7F672C is a 21,000-logic-cell field-programmable gate array (FPGA) with a maximum frequency of 420 MHz, a 1.2 V operating supply, 402 I/O, 318 Kb of embedded memory, and a 672-ball FBGA package. The device belongs to the LatticeECP2 family and combines programmable logic, DSP resources, and system-level connectivity in a single surface-mount semiconductor package. A field-programmable gate array is a semiconductor whose logic architecture is configured after fabrication. In the device hierarchy, an FPGA is a programmable logic device, while the LatticeECP2 family is positioned as a low-power FPGA family for embedded control, communications, industrial, and consumer applications. Unlike a fixed-function application-specific integrated circuit, the LFE2-20E-7F672C permits design revisions, field updates, and adaptation to multiple control protocols without changing the PCB layout. Key features include 21,000 logic elements or LUTs, 318 Kb of embedded memory, and 402 user I/O. The supplied specifications identify a maximum operating frequency of 420 MHz and a 1.2 V operating supply voltage. Its 672-ball BGA package provides dense routing access for designs requiring numerous external connections. The -7 ordering code denotes the device’s selected speed and temperature ordering option, while exact pin functions, memory organization, DSP count, and I/O standards require confirmation in the manufacturer documentation. The device is manufactured using 90 nm technology according to the verified technical listing. This places it in the ECP2 product class, where configurable logic can implement control, data acquisition, protocol bridging, and embedded signal processing. The 1.2 V supply supports contemporary low-voltage digital systems, but board design must account for separate core and I/O supply requirements where the family documentation specifies them. Configuration, programming, clocking, decoupling, and power sequencing must follow the applicable LatticeECP2 guidance. Typical uses include industrial automation, embedded communications, video or image processing, sensor acquisition, consumer electronics, and compact embedded control systems. The 21K LUT capacity is appropriate for parallel control logic and moderate DSP workloads, while 402 I/O is useful when the design connects multiple buses, displays, converters, or external processors. Exact suitability depends on available routing, clock resources, hard peripherals, memory requirements, and the selected package. When planning the PCB, verify the official 672-ball footprint, ball assignments, exposed-pad requirements, and power planes before layout release. Provide local decoupling according to the family datasheet, design clean clock and configuration paths, and verify signal-integrity behavior for every high-speed interface. Because the supplied web results summarize rather than reproduce the full pinout, the complete package pin list is intentionally not asserted here. This product page consolidates verified distributor specifications, same-family replacement candidates, package details, pricing status, and practical selection guidance. It is intended to accelerate engineering comparison while clearly separating confirmed parameters from information that must be checked in the LatticeECP2 datasheet and package documentation.

RFC Hubungi kami
LFE2-20E-7Q208C - 21K LUT ECP2 FPGA | Lattice
LFE2-20E-7Q208C

LFE2-20E-7Q208C - 21K LUT ECP2 FPGA | Lattice

The Lattice Semiconductor LFE2-20E-7Q208C is an ECP2 field-programmable gate array with 21K LUTs, 131 I/O, 1.2 V core voltage, and a -7 speed grade in a 208-pin BFQFP package. It is designed for embedded systems that require programmable logic, parallel interfaces, control functions, and moderate signal-processing capability in a single reconfigurable device. An FPGA is a digital semiconductor whose internal logic, interconnect, and peripheral behavior are configured after manufacture. It belongs to the programmable-logic hierarchy: FPGA > field-programmable gate array > digital integrated circuit > semiconductor. Unlike a fixed-function microcontroller or application-specific controller, an FPGA can implement parallel datapaths and hardware state machines while retaining the flexibility to update logic through a configuration interface. The LFE2-20E-7Q208C provides 21K LUTs, 131 user I/O, and a 1.2 V supply while operating in the -7 speed grade. The 208-pin BFQFP package provides 131 I/O rather than using all 208 package positions for user signals, leaving positions for power, ground, configuration, and other dedicated functions. Its programmable architecture supports designs that require deterministic control, interface adaptation, protocol handling, or parallel data acquisition. The ECP2 architecture is appropriate for designs combining control logic with modest data processing. The 1.2 V core voltage supports integration into systems that partition supply rails by function, while the -7 grade identifies the device’s speed classification. Exact logic-cell counts, embedded-memory capacity, supported I/O standards, configuration modes, and electrical limits should be confirmed in the manufacturer datasheet before finalizing a high-speed or safety-critical design. Typical uses include industrial control, communications infrastructure, test and measurement equipment, embedded data acquisition, display interfaces, and compact control systems. In each case, the FPGA can execute multiple state machines concurrently, absorb protocol-specific formatting, and isolate time-critical operations from a companion processor. The 131 available I/O are particularly useful for parallel buses, capture logic, and mixed peripheral interfaces. A key design consideration is the distinction between package capacity and usable user I/O. A 208-pin package does not provide 208 general-purpose pins; this device has 131 user I/O. Board planning must also account for the 1.2 V core supply, configuration pins, decoupling, programming access, and the pin assignments required by the selected device family and package variant. This page combines the verified device identity, electrical highlights, package information, sourcing workflow, and drop-in replacement analysis with practical guidance for FPGA selection. It is intended to help engineers distinguish a genuine same-footprint replacement from a merely similar FPGA and to plan a migration without overlooking configuration, pinout, and supply requirements.

RFC Hubungi kami
LFE2-35E-5F484C - 32K LUT ECP2 FPGA | Lattice Semiconductor
LFE2-35E-5F484C

LFE2-35E-5F484C - 32K LUT ECP2 FPGA | Lattice Semiconductor

Lattice Semiconductor LFE2-35E-5F484C is an ECP2 field-programmable gate array with 32,000 look-up tables, 331 I/O sites, a 1.2 V core supply, and a 484-ball FBGA package. It combines programmable logic, embedded memory, and advanced DSP blocks in a single surface-mount device suited to consolidated control, signal-processing, and interface designs. An FPGA is a reconfigurable digital semiconductor that combines programmable logic blocks with programmable interconnect resources. At the system level, it belongs to the programmable-logic hierarchy: FPGA, programmable-logic device, digital integrated circuit, and semiconductor. Unlike a fixed-function microcontroller or application processor, an FPGA implements parallel hardware logic that can be rewritten for different protocols, data paths, or control functions after manufacture. The ECP2 family provides 32,000 LUTs, 331 I/O, and advanced DSP blocks in the specified device. The 1.2 V core operating voltage supports modern low-voltage digital designs, while the 484-FBGA package offers a dense route for implementing many board-level interfaces in a compact component. The -5 ordering suffix identifies the selected Lattice speed and temperature grade, and the trailing C identifies the commercial package configuration. At an architectural level, the FPGA fabric can implement parallel datapaths, control logic, protocol bridges, and fixed-point or filtered DSP functions. The embedded DSP blocks accelerate suitable arithmetic workloads while programmable interconnect routes signals between LUTs, registers, memories, block RAM, DSP elements, and I/O. Designers must still map clocks, resets, buses, and interfaces in the development tool and verify timing after each implementation. Typical uses include industrial control, data acquisition, communications infrastructure, embedded vision, instrumentation, and general-purpose digital signal processing. Its combination of 331 I/O and programmable logic is especially useful when a design needs many parallel external connections, custom serial protocols, or multiple independent processing pipelines rather than a single sequential processor core. Board design should follow the manufacturer pinout and recommended decoupling guidance for the 484-FBGA package. Confirm that every power, ground, configuration, clock, and high-speed signal connection matches the selected device variant, and route configuration pins so the FPGA enters a valid operating state during power-up, reset, and reprogramming events. This product overview combines the device's verified architecture and ordering information with family-level comparison data and practical implementation guidance. It helps engineers evaluate the LFE2-35E-5F484C for high-density programmable-logic, DSP, control, and I/O-intensive designs before completing device-specific schematic and timing review.

RFC Hubungi kami
LFE2-35E-5F484I - 32K LUT, 331 I/O ECP2 FPGA | Lattice
LFE2-35E-5F484I

LFE2-35E-5F484I - 32K LUT, 331 I/O ECP2 FPGA | Lattice

The Lattice Semiconductor LFE2-35E-5F484I is an ECP2 field-programmable gate array with approximately 32,000 logic cells, 331 I/O, and a -5 speed grade in a 484-ball BGA package. Its 1.2 V core voltage places it in the LatticeECP2 family of low-power programmable logic devices. The part is designed for industrial-temperature applications requiring moderate logic density, substantial user I/O, and programmable digital signal processing support. An FPGA is a reconfigurable semiconductor whose lookup tables, registers, interconnect, and programmable I/O implement digital logic functions after configuration. Within the product hierarchy, the LFE2-35E-5F484I is an FPGA, a programmable-logic IC, and a semiconductor. Compared with fixed-function logic, an FPGA supports field updates, parallel processing, hardware customization, and design changes without changing the PCB. The ECP2 family balances programmable logic, embedded DSP capability, and low-power operation in a single device. The device provides approximately 32K LUTs and 331 I/O, giving it the resources to consolidate multiple digital subsystems onto one package. Its -5 speed designation identifies the selected performance grade, while the 484-ball BGA package supports dense PCB routing and a large pin count. The 1.2 V core supply is suitable for low-energy logic systems. Exact memory-block, DSP-count, differential-I/O, operating-temperature, and package-dimension details should be confirmed in the LatticeECP2/M family data sheet before design release. The LFE2-35E-5F484I belongs to the ECP2 family rather than the ECP2M family. This distinction matters because the family data sheet identifies advanced DSP and high-speed SERDES capabilities that are not automatically shared by every ECP2 member. Board-level compatibility must therefore be based on the exact package, speed suffix, I/O arrangement, power rails, and configuration requirements rather than the device family name alone. Typical uses include industrial control, communications interfaces, test equipment, embedded signal processing, data acquisition, and general-purpose programmable logic. Its combination of 331 I/O and a large logic-cell count is useful when an interface-rich design must consolidate logic that would otherwise require multiple programmable devices. A synchronized switching converter or multiple regulators may be required because the core and I/O supplies can have distinct voltage requirements. When planning a PCB, reserve the complete 484-ball land pattern, verify every power and ground ball assignment, and confirm differential-pair routing and configuration interface requirements against the family documentation. Treat the BGA package as a fine-pitch assembly constraint requiring appropriate land geometry, solder mask definition, thermal design, and inspection coverage rather than treating the FPGA as a generic fine-pitch component. This page combines the exact LFE2-35E-5F484I ordering characteristics with same-family drop-in candidates, application guidance, and design-focused comparison data. It is intended to accelerate engineering selection while keeping unresolved device details subject to verification in the manufacturer family documentation.

RFC Hubungi kami
LFE2-35E-5F672C - 32K LUT ECP2 FPGA | Lattice Semiconductor
LFE2-35E-5F672C

LFE2-35E-5F672C - 32K LUT ECP2 FPGA | Lattice Semiconductor

The Lattice Semiconductor LFE2-35E-5F672C is an ECP2 FPGA with 32,000 logic cells, 450 I/O, and a 1.2 V supply in a 672-pin FPBGA package. The device is identified as an LatticeECP2 field-programmable gate array using 90 nm technology, with a 27 x 27 mm package and 311 MHz maximum operating frequency. It is intended for complex logic and memory applications where programmable parallel processing, high I/O density, and embedded block RAM are useful. An FPGA, or field-programmable gate array, is a programmable digital semiconductor that combines configurable logic blocks, programmable interconnect, memory resources, and I/O into one device. The LFE2-35E-5F672C belongs to the ECP2 family, a low-power FPGA platform used for embedded control, communications, signal processing, and general-purpose programmable logic. Its 450 I/O provide substantial connectivity for parallel buses, memory interfaces, and control logic. The verified product information identifies 32,000 cells, 450 I/O, a 1.2 V operating voltage, 90 nm process technology, and a -5 speed grade. The 672-pin FPBGA package is specified as a surface-mount, tray-packaged component. The ECP2 architecture is suited to designs requiring deterministic parallel logic rather than a high-level microcontroller workload, while the large pin count supports high-bandwidth external memory and peripheral connectivity. The LFE2-35E-5F672C is identified as obsolete by GlobalSpec data, so procurement should account for lifecycle risk rather than assuming new production availability. Distributor records and marketplace listings may still show inventory, but availability, pricing, and lead time require confirmation at the time of purchase. A 672-pin BGA package also requires careful PCB layout, controlled reflow, and adequate via-in-pad or fanout routing for reliable assembly. Typical applications include industrial control systems, communications infrastructure, test and measurement equipment, embedded video processing, interface aggregation, and high-density logic prototyping. The device can also be used in FPGA-based embedded systems where programmable logic, block memory, and a large I/O count must coexist on one package. Designers should verify the exact pinout, power rails, configuration method, supported I/O standards, and memory interface requirements against the manufacturer documentation before layout. Since the package exposes 672 balls, power and ground distribution, decoupling, escape routing, and thermal management are especially important. A PCB with adequate layer count, via density, and assembly-process capability should be planned before committing to this footprint. This product page consolidates the verified distributor and manufacturer-oriented specifications, lifecycle status, package information, and same-family replacement candidates into one engineering-focused reference. It also highlights the practical distinction between true package-compatible alternatives and ECP2 devices that require a different footprint.

RFC Hubungi kami
LFE2-35E-5F672I - 32K LUT ECP2 FPGA, 450 I/O, 672-BBGA | Lattice
LFE2-35E-5F672I

LFE2-35E-5F672I - 32K LUT ECP2 FPGA, 450 I/O, 672-BBGA | Lattice

The Lattice Semiconductor LFE2-35E-5F672I is an ECP2 field-programmable gate array (FPGA) providing 32,000 logic cells (32K LUTs) with 450 user I/O, built on a 0.09 um embedded process and offered in a 672-ball BGA package for a 1.2 V core supply, -5 speed grade, industrial temperature range. An FPGA is a programmable logic device: a semiconductor whose interconnect and logic fabric are configured at power-up from a bitstream held in external flash, so one physical part can implement many different circuit functions. The LFE2-35E-5F672I belongs to the ECP2 family, which sits in the broader programmable-logic hierarchy: FPGA -> programmable logic device -> digital ASIC alternative -> digital integrated circuit. Lattice positions the ECP2 series as a cost-effective, low-power mid-density platform for high-speed processing and data transmission designs that need more parallelism than a microcontroller or discrete logic can deliver. Catalogued device attributes for this part include 32,000 logic cells, 450 user I/O, dedicated DSP resources, a 1.2 V core voltage, and the -5 speed grade in an industrial temperature option. The 672-ball BGA land pattern offers a large number of high-speed differential-capable I/O in a compact square footprint, which is what makes the device attractive for parallel data acquisition, video pipeline processing and multi-channel interface bridging where a smaller package would run out of pins. The -5 speed suffix denotes the Lattice speed grade for this device within the ECP2 family, so it can be ordered alongside slower -3 and faster -7 options in the same 672-ball package without changing the board layout. The trailing I character marks the industrial temperature grade, while the 5 in the part number denotes the 5 V configuration bank family characteristic of this ECP2 variant. Device configuration is handled through the standard Lattice ECP2 configuration path, so the design can be programmed in-circuit from a serial flash or a microcontroller. Typical end uses for this part include video and image pipeline processing, industrial control and test instrumentation, communications and data-transmission equipment, and general-purpose signal conditioning or protocol bridging. In each case the combination of 32K LUTs, 450 I/O and DSP capability allows several parallel datapaths to be consolidated into one device instead of a collection of discrete components. When designing around the LFE2-35E-5F672I, treat the 1.2 V core rail as the critical supply: decouple it close to the ball grid with low-inductance ceramic capacitance and keep the switching-noise budget for surrounding analog sections in mind, since a 672-ball BGA also presents a substantial thermal and decoupling challenge on multilayer boards. Use the manufacturer datasheet for the full pin, ball and power-supply assignment list. This page consolidates the verified distributor and catalogue data for the LFE2-35E-5F672I, adds same-footprint drop-in alternatives from the ECP2 and related Lattice families, and supplies the application, thermal and layout guidance that a bare catalogue listing does not provide.

RFC Hubungi kami
LFE2-35E-6F484C - 32,000 LUT ECP2 FPGA | Lattice Semiconductor
LFE2-35E-6F484C

LFE2-35E-6F484C - 32,000 LUT ECP2 FPGA | Lattice Semiconductor

Lattice Semiconductor LFE2-35E-6F484C is an ECP2 field-programmable gate array with 32,000 logic cells, 331 I/O, and a 484-ball FBGA package. The device provides reconfigurable programmable logic for consolidating parallel logic, interface control, communications, and embedded signal-processing functions into a single integrated circuit. Its 90 nm ECP2 architecture supports compact, high-performance designs where discrete logic and multiple programmable devices would otherwise increase board area, power consumption, and routing complexity. An FPGA is a semiconductor device whose digital logic is configured after manufacture. The FPGA hierarchy includes programmable logic arrays, configurable I/O, embedded memory, dedicated processing resources, and clock and control networks. Within the broader semiconductor category, the LFE2-35E-6F484C belongs to the LatticeECP2 family and combines high-speed programmable logic with system-level connectivity in a surface-mount ball-grid-array package. The ECP2 family is optimized for designs requiring advanced DSP blocks, high-speed SERDES capability in the ECP2M family, and high-speed I/O. In the LFE2-35E-6F484C, the 32,000-cell resource count provides substantial capacity for parallel datapaths, protocol bridging, control logic, and image or signal processing. The 484-ball package supports a large number of connections and is appropriate for multilayer PCB layouts with dense power, ground, signal, and configuration routing. The “35E” portion identifies the device resource class and ECP2 technology family, while “-6” identifies the speed grade and “F484C” identifies the 484-ball package configuration. Device selection should therefore consider logic capacity, I/O requirements, speed grade, package ball pattern, configuration method, memory requirements, and the operating environment. The E designation in the ordering code also distinguishes it from the related FN package suffix shown in the ordering information. Typical uses include communications infrastructure, industrial control, video and image processing, test equipment, consumer electronics, and embedded systems. A suitable design may use the FPGA to implement multiple parallel channels, custom protocols, timing functions, control logic, or DSP pipelines while retaining field-updatable configuration. PCB implementation requires careful treatment of the large BGA footprint. Follow the manufacturer package information for ball assignments, power planes, decoupling, configuration pins, and programming interface connections. Confirm that the selected PCB library uses the exact 484-ball mechanical and electrical definition before committing to fabrication. This product page combines the exact LFE2-35E-6F484C ordering information, package details, sourcing context, verified drop-in alternatives, and practical design guidance to support component selection and board-level planning.

RFC Hubungi kami
LFE2-35E-6F484I - 32K LUT ECP2 FPGA | Lattice Semiconductor
LFE2-35E-6F484I

LFE2-35E-6F484I - 32K LUT ECP2 FPGA | Lattice Semiconductor

The Lattice Semiconductor LFE2-35E-6F484I is an ECP2 field-programmable gate array with 32,000 logic elements, 4,000 look-up tables, 331 user I/O, and 339,968 total RAM bits, housed in a 484-pin FBGA package. The device operates from a 1.14 V to 1.26 V supply and is specified for an industrial temperature range from -40 °C to 100 °C junction temperature. An FPGA is a programmable semiconductor in which the logic, interconnect, and digital signal-processing resources are configured after manufacture. ECP2 devices belong to the broader field-programmable logic hierarchy, combining configurable LUT-based logic, embedded memory, programmable I/O, and dedicated DSP resources in one device. This combination allows designers to implement parallel digital logic, control functions, interface logic, and fixed-point processing without changing the physical PCB when design requirements evolve. The LFE2-35E-6F484I provides 32,000 logic elements, corresponding to 4,000 LUTs, together with 339,968 RAM bits and 331 user I/O. The -6 speed designation identifies the device speed grade, while the final letter in the part number identifies the package and temperature-related ordering information. Its 484-ball package supports dense PCB routing for systems requiring substantial I/O, including industrial control, communications, instrumentation, embedded processing, and general-purpose programmable logic. The device also includes DSP capability, making it suitable for fixed-point filtering, signal conditioning, and control-loop implementations where parallel logic and dedicated arithmetic resources are useful. Its 1.2 V-class supply requirement places it in modern low-voltage digital systems, while the 331 user I/O provide substantial connectivity for external memories, sensors, converters, transceivers, and industrial interfaces. When designing a board around the LFE2-35E-6F484I, follow the manufacturer’s BGA layout, power-supply, decoupling, and programming guidelines. Pay particular attention to the required core voltage tolerance, signal-transition requirements, thermal conditions, and the configuration interface used during programming. The large BGA footprint also benefits from careful layer planning and controlled escape routing for high-speed and high-fan-out connections. This page consolidates the device’s electrical, packaging, and application information, identifies a confirmed same-family alternative, and provides practical selection and layout guidance for engineers evaluating the LFE2-35E-6F484I for a new FPGA design.

RFC Hubungi kami
LFE2-35E-6F672C - 32K LUT ECP2 FPGA | Lattice Semiconductor
LFE2-35E-6F672C

LFE2-35E-6F672C - 32K LUT ECP2 FPGA | Lattice Semiconductor

Lattice Semiconductor LFE2-35E-6F672C is an ECP2 field-programmable gate array with 32K LUTs, up to 450 I/O, a 357 MHz system frequency, and a 1.2 V supply. The device is packaged in a 672-ball FBGA measuring 27 x 27 mm and uses a -6 speed grade. It is intended for designs requiring substantial programmable logic in a single monolithic device. An FPGA is a semiconductor whose internal logic, interconnects, and I/O behavior are configured after fabrication. The LFE2-35E-6F672C belongs to the ECP2 family of low-power FPGAs, combining configurable logic blocks, embedded resources, programmable I/O, and high-speed serial capabilities in one package. This makes it suitable for systems that need flexible hardware behavior, rapid product customization, or parallel implementation of control and interface logic. The ECP2 architecture provides approximately 32K LUTs and a maximum system frequency of 357 MHz for the cited configuration. Its 672-ball package exposes as many as 450 user I/O, allowing dense connections to external memory, processors, network PHYs, and custom peripherals. The 1.2 V core supply and -6 speed designation place the part in the performance class intended for general-purpose programmable logic rather than extreme-performance applications. This LFE2 device uses 90 nm process technology and integrates programmable logic with system-level connectivity. The 27 x 27 mm FBGA has a 672-ball pin count, providing a high pin-density interface suitable for multilayer boards. Its lead-free construction is identified in product records, while detailed power, junction-temperature, configuration-memory, and differential-I/O characteristics should be confirmed against the manufacturer documentation for the exact ordering code. Typical uses include network interface equipment, industrial control modules, data-acquisition systems, embedded processors, storage controllers, and video or image-processing pipelines. The large logic capacity is especially useful when a design combines bus arbitration, protocol conversion, data formatting, and control logic instead of routing each function through a discrete programmable-logic device or multiple lower-density FPGAs. PCB design should account for the fine-pitch BGA footprint, high-speed clock routing, power-plane integrity, decoupling, and thermal spreading. Confirm device programming requirements, supported I/O standards, voltage tolerances, and bank configuration directly from the Lattice ECP2 documentation before release. This page adds application guidance, drop-in alternatives, comparison parameters, and design notes to the core manufacturer specifications.

RFC Hubungi kami
LFE2-35E-6F672I - 32K LUT FPGA, 450 I/O | Lattice Semiconductor
LFE2-35E-6F672I

LFE2-35E-6F672I - 32K LUT FPGA, 450 I/O | Lattice Semiconductor

Lattice Semiconductor LFE2-35E-6F672I is an ECP2 field-programmable gate array (FPGA) with 32,000 logic elements, 450 I/O, and a 1.2 V supply in a 672-ball BGA package. It is designed for high-speed digital processing, programmable logic, embedded control, and interface-intensive systems. The -6 speed grade supports demanding timing requirements, while the industrial temperature designation supports extended-temperature operation. An FPGA is a programmable semiconductor that combines configurable logic blocks, programmable interconnect, memory resources, and input/output blocks. The LFE2-35E-6F672I belongs to the ECP2 family and provides a hardware implementation path for designs requiring parallel data processing, protocol bridging, signal conditioning, or high-speed control without relying on a fixed-function ASIC. Its 450 I/O resources make it especially suitable for systems that need substantial external connectivity. Key features include 32,000 logic elements, 450 user I/O, a 1.2 V operating supply, and a -6 performance designation. The ECP2 architecture is suitable for designs where deterministic parallel logic, flexible configuration, and rapid design changes are more valuable than the power efficiency of a small microcontroller. The 672-ball package supports dense board layouts and high-pin-count implementations. The LFE2-35E-6F672I is positioned for high-speed digital processing applications. Its 32K logic-element resource enables substantial combinational and sequential logic, while 450 I/O allow multiple buses, control signals, differential interfaces, and peripheral connections to be integrated in one programmable device. The 1.2 V core supply reduces the voltage headroom required by the internal logic fabric. Typical uses include industrial control systems, communications infrastructure, test and measurement equipment, video and imaging interfaces, embedded signal processing, and high-speed data acquisition. The device can also implement protocol bridges, custom accelerators, control logic, and interface aggregation where firmware flexibility is required. Designers should verify the exact package ball assignments, pinout, supported I/O standards, configuration method, power-supply sequencing, and board-level thermal conditions in the Lattice ECP2 documentation. Confirm the required speed, temperature, and package variants before releasing a production PCB, especially when using high-speed I/O or differential clocking. This page combines manufacturer and distributor product information, technical context, application guidance, and drop-in comparison candidates to support component selection and PCB planning.

RFC Hubungi kami
LFE2-35E-7F484C - 32K LUT ECP2 FPGA | Lattice Semiconductor
LFE2-35E-7F484C

LFE2-35E-7F484C - 32K LUT ECP2 FPGA | Lattice Semiconductor

The Lattice Semiconductor LFE2-35E-7F484C is a 32K-LUT ECP2 field-programmable gate array with 331 user I/Os, a 1.2 V core supply, a -7 speed grade, and a 484-pin FBGA package. Designed for embedded logic, interface, control, and DSP applications, it combines programmable logic resources with dedicated DSP capability on a 90 nm FPGA process. An FPGA is a reconfigurable semiconductor in the programmable-logic hierarchy, positioned between fixed-function logic devices and higher-level programmable controllers. The ECP2 family combines LUT-based logic, programmable I/O, dedicated DSP blocks, embedded memory, and configuration resources in a single device. This makes an ECP2 FPGA useful when several control, interface, and signal-processing functions must share a compact, high-density implementation. The LFE2-35E-7F484C provides 32,000 LUTs and 331 I/Os. Its -7 designation identifies the device speed grade, while the 1.2 V value is the core operating voltage used to characterize the ECP2 logic core. A 484-pin surface-mount FBGA provides a high pin count for parallel interfaces, external memory connections, clock distribution, and general peripheral routing. The device also includes DSP resources for filtering, arithmetic, and other fixed-point signal-processing tasks. The 90 nm ECP2 process supports integration of programmable logic and DSP functions without relying on a separate processor for every control function. Designers can partition a design among serial or parallel interfaces, general-purpose logic, counters, state machines, and DSP pipelines. Configuration data determines the final interconnect and logic implementation, allowing design revisions and field updates when the selected programming flow supports in-system reconfiguration. Typical uses include industrial automation, communications infrastructure, instrumentation, embedded control, video and image interfaces, audio processing, and general-purpose DSP modules. The high I/O count is particularly useful when a system must bridge multiple buses, memory interfaces, sensors, converters, or display controllers while retaining parallel programmable logic for control and protocol handling. PCB design should account for the BGA escape routing, power distribution, decoupling, clock integrity, and configuration access. Use the manufacturer pin table and package drawing when assigning every ball, especially because the 484-pin FBGA offers no simple pin-by-pin visual confirmation on the board. Confirm the selected configuration interface, supported I/O standards, bank voltage constraints, and thermal conditions before releasing the PCB layout. This product page combines the device specifications, application guidance, same-footprint alternatives, comparison data, and practical implementation notes needed to plan an ECP2 design. It also highlights engineering trade-offs involving logic density, speed grade, I/O capacity, package routing, and the availability of a suitable drop-in replacement.

RFC Hubungi kami
LFE2-35E-7F672C - 32K LUT ECP2 FPGA, 450 I/O, 672-BBGA | Lattice
LFE2-35E-7F672C

LFE2-35E-7F672C - 32K LUT ECP2 FPGA, 450 I/O, 672-BBGA | Lattice

The Lattice Semiconductor LFE2-35E-7F672C is an ECP2 field-programmable gate array (FPGA) providing 32,000 look-up tables, 339,968 gates and 450 user I/O in a 672-ball BGA (672-BBGA) package, operating from a 1.2 V core supply at the -7 speed grade. An FPGA is a programmable semiconductor whose logic fabric, memory and interconnect are configured at power-up from a non-volatile configuration memory. Where an ASIC fixes a function in silicon, an FPGA lets a designer reconfigure the same package pinout for different logic, interface or DSP tasks, shortening development cycles and supporting field upgrades. The ECP2 family sits at the low-cost, high-volume end of Lattice's portfolio and is widely used for control, interface and signal-processing logic that does not require the resources of a midrange FPGA. Key features of this device include 32,000 LUTs (reported as 32K LUTs by distributor listings), a 339,968 gate count, and 450 general-purpose I/O in a single square BGA package with ball terminals. The 1.2 V core supply keeps on-board power dissipation manageable in dense control designs, and the -7 speed grade is the fastest ordering option in the ECP2 line, which matters for timing closure on multi-cycle bus and pipeline-heavy logic. The family also supports dedicated DSP and memory resources for arithmetic and buffer-heavy data paths. Technologically the part belongs to the ECP2 low-cost architecture, where the logic fabric is built from 4-input LUTs with dedicated block RAM and DSP multipliers. Because configuration is non-volatile, the device boots directly into the loaded bitstream without an external configuration PROM, which reduces board area and BOM cost on production builds. Exact block counts for DSP multipliers and block RAM for this ordering code are listed as [DATA_NEEDED: DSP block count] and [DATA_NEEDED: block RAM count] in the specification table; consult the manufacturer datasheet for the definitive resource breakdown before finalizing a design. Typical applications for this device include industrial control and factory automation modules, video timing and interface bridging, audio and general DSP pipelines, network and data-communication interface cards, and instrumentation front ends. The high I/O count of 450 in a single 672-ball package makes it especially useful where many parallel lines, memory interfaces and differential pairs must converge on one device. When designing around this FPGA, budget for the BGA escape-routing density of a 672-ball package, match the printed board stack-up to the manufacturer's ball-pitch and land-pattern recommendations, and confirm the -7 speed grade timing margin against your slowest clock domain. Use the Request a Quote form on this page for current pricing, stock and lead time on this exact ordering code. This page consolidates manufacturer-family specifications, distributor availability and drop-in alternatives for the LFE2-35E-7F672C, plus practical design notes, a parameter-by-parameter comparison table and application guidance that go beyond a bare catalog listing.

RFC Hubungi kami
LFE2-50E-5F484C - 48K LUT FPGA, 339 I/O, FBGA-484 | Lattice
LFE2-50E-5F484C

LFE2-50E-5F484C - 48K LUT FPGA, 339 I/O, FBGA-484 | Lattice

The Lattice Semiconductor LFE2-50E-5F484C is a 48,000-cell LatticeECP2 field-programmable gate array with 339 user I/O, 396,288 RAM bits, and a 1.2 V core supply in a 484-pin FBGA package. It combines programmable logic, embedded block RAM, and DSP resources in a surface-mount FPGA designed for digital control, interface, communications, and signal-processing systems. An FPGA is a reconfigurable semiconductor in which digital logic functions are stored as a bitstream and implemented through a configurable array of logic and routing resources. The LatticeECP2 family belongs to the broader FPGA and programmable-logic hierarchy, where designers use programmable hardware to consolidate functions that otherwise require multiple programmable logic devices, fixed logic ICs, or microcontroller peripherals. The ECP2 architecture in this device provides 48,000 logic cells organized into 6,000 logic array blocks, together with 396,288 bits of embedded RAM. Its 339 user I/O support extensive external connectivity for memory, control signals, serial interfaces, and parallel data paths. The specified core supply is 1.2 V, with a stated operating supply range of 1.14 V to 1.26 V. Implementation should account for the large 484-pin FBGA footprint and its demanding escape-routing requirements. The device uses 90 nm FPGA technology and is identified with a speed grade of 5. Designers also need to budget pin assignment, bank-specific interface constraints, configuration memory, clocking, decoupling, and programmable-device verification when moving from schematic capture to a production PCB. Typical applications include industrial control systems, communications infrastructure, video and image processing, data acquisition, embedded instrumentation, and network interface equipment. The combination of 48,000 logic cells, 396,288 RAM bits, 339 I/O, and DSP capability permits compact implementation of parallel processing pipelines and multi-interface control modules without relying on several separate programmable devices. Power planning and PCB layout are especially important because a 484-pin FBGA demands dense escape routing and numerous high-speed connections. Confirm the intended configuration interface, clock topology, I/O standards, voltage requirements, and decoupling network against the manufacturer documentation before releasing the board layout. Validate timing and programming behavior with the implementation flow selected for the ECP2 family. This product page combines the exact LFE2-50E-5F484C characteristics with same-footprint ECP2 alternatives, a parameter comparison, and practical guidance for FPGA implementation, power integrity, routing density, and production migration.

RFC Hubungi kami
LFE2-50E-5F484I - 48K LUT ECP2 FPGA | Lattice
LFE2-50E-5F484I

LFE2-50E-5F484I - 48K LUT ECP2 FPGA | Lattice

Lattice Semiconductor LFE2-50E-5F484I is an ECP2 field-programmable gate array with 48,000 logic elements, 339 user I/O pins, 396,288 RAM bits, and a 484-ball BGA package. It operates from a 1.14 V to 1.26 V core supply, supports the -5 speed grade, and is specified for an operating junction-temperature range of -40°C to 100°C. These characteristics position the device for embedded industrial, communications, control, and signal-processing systems requiring reconfigurable parallel logic and programmable I/O. An FPGA is a semiconductor whose digital logic is configured after manufacture. The LFE2-50E-5F484I belongs to the ECP2 FPGA family and combines programmable logic blocks, embedded block RAM, programmable input/output structures, and dedicated DSP resources. In system architecture, it sits between fixed-function ASICs and software-driven processors: an ASIC provides maximum efficiency but limited design flexibility, while an FPGA permits logic changes, field upgrades, and product differentiation without changing the PCB. The principal device attributes are its 48,000 logic elements, 339 configurable user I/O pins, and 396,288 total RAM bits. The -5 speed designation identifies the performance grade, while the 1.14 V to 1.26 V operating supply range supports integration with compatible low-voltage core rails. Its 484-BBGA package provides a high pin count for parallel buses, external memory interfaces, high-speed data paths, and systems requiring numerous individually routable user signals. The ECP2 architecture supports parallel processing, programmable routing, embedded memory, and DSP-oriented logic. This combination makes it useful when a design must execute several acquisition, filtering, encoding, decoding, or control tasks concurrently. Resource planning remains important: 48,000 logic elements describe the available fabric capacity rather than the equivalent number of gates in a conventional ASIC, while the 396,288 RAM bits establish the total embedded-memory capacity for buffering, tables, packet data, and intermediate results. Typical applications include industrial control systems, communications infrastructure, video and imaging pipelines, instrumentation, embedded test equipment, and general-purpose hardware acceleration. Its large I/O count is especially valuable where an external processor, DDR memory, ADC, DAC, network PHY, or parallel display must interface directly with programmable logic. Multiple independently configurable I/O standards also make the device suitable for systems combining control signals with high-volume parallel data. A critical design consideration is that the 484-BBGA package requires a controlled PCB escape strategy, power distribution network, and thermal design. Decoupling should be placed directly at the relevant supply pins, while high-speed routes require short paths, continuous reference planes, and avoidance of split-plane crossings. Confirm the exact pin assignments, configuration interface requirements, supported I/O standards, and bank constraints in the manufacturer datasheet and package documentation before schematic capture. This page combines the exact device identity, operating limits, resource capacity, package information, application guidance, and same-footprint family comparisons into a practical engineering reference. It also highlights the important distinction between a true pin-compatible replacement and a merely similar FPGA, helping engineers evaluate board reuse, resource compatibility, timing grade, temperature range, and supply requirements together.

RFC Hubungi kami
LFE2-50E-5F672C - 48K LUT ECP2 FPGA | Lattice Semiconductor
LFE2-50E-5F672C

LFE2-50E-5F672C - 48K LUT ECP2 FPGA | Lattice Semiconductor

Lattice Semiconductor LFE2-50E-5F672C is an ECP2 field-programmable gate array with 48,000 LUTs, 500 I/Os, a 1.2 V core supply, and a -5 speed grade, packaged in a 672-pin FBGA. The device combines 90 nm CMOS FPGA technology with programmable logic resources for embedded control, interface bridging, signal processing, and system-on-chip designs. An FPGA is a programmable semiconductor whose digital logic, I/O, and embedded resources can be configured after manufacture. Within the product hierarchy, the LFE2-50E-5F672C is a field-programmable gate array, an LatticeECP2 FPGA, a reconfigurable digital logic IC, and a semiconductor intended for embedded systems. Its large 672-ball package supports a high pin count and extensive user I/O, while its 48,000 LUT capacity supports parallel digital logic and DSP-oriented designs. The verified product information identifies 48,000 LUTs, 500 I/O, a 1.2 V supply, a -5 speed grade, and a 672-pin FBGA package. Cross-reference data lists the device as a 50,000-cell FPGA operating at 357 MHz and describes its package as a 27 mm by 27 mm lead-free FBGA-672. These specifications make it relevant to industrial control, communications, instrumentation, and embedded processing systems requiring extensive programmable logic. The LFE2-50E-5F672C belongs to the LatticeECP2 family and uses 90 nm CMOS fabrication technology. Its 396,288-bit configuration-memory value is shown for the closely related 50K ECP2 listing, while the target listing itself is presented as a 48K-LUT device. The ECP2 architecture combines programmable logic with DSP resources, allowing designers to implement control logic, data pipelines, serial interfaces, and protocol handling in one programmable device. Typical uses include industrial automation controllers, communications interface modules, test and measurement equipment, embedded video and control systems, and general-purpose system-on-chip prototypes. The 500 available I/O are particularly useful when a design requires multiple parallel buses, mixed logic interfaces, or high pin-count connectivity. Its 357 MHz listed performance gives the design a concrete clock target, subject to the device's documented configuration and timing conditions. The most important design check is the difference between pin compatibility and complete application equivalence. The verified cross-reference data explicitly describes LFE2-50E-5FN672C as a complete replacement, while other ECP2 ordering codes can differ in speed grade, temperature suffix, or package marking. Engineers should compare the exact Lattice ordering guide, power requirements, configuration scheme, and system timing before approving a substitution. This page consolidates verified supplier specifications, same-package ECP2 alternatives, parameter comparisons, pricing availability status, and practical design guidance. It distinguishes explicitly documented replacement candidates from ordering variants whose exact electrical, temperature, or package details require manufacturer confirmation.

RFC Hubungi kami
LFE2-50E-5F672I - 48K ECP2 FPGA, 500 I/O | Lattice
LFE2-50E-5F672I

LFE2-50E-5F672I - 48K ECP2 FPGA, 500 I/O | Lattice

The Lattice Semiconductor LFE2-50E-5F672I is an ECP2 field-programmable gate array with 48,000 logic elements, 6,000 LABs/CLBs, 396,288 RAM bits, and 500 I/O pins in a 672-ball FPBGA package measuring 27 mm by 27 mm. It is designed for industrial-temperature, surface-mount systems that require programmable logic, substantial parallel I/O, and embedded block RAM in a single high-density package. An FPGA is a semiconductor device whose digital logic and interconnect can be configured after manufacture. ECP2 belongs to the FPGA hierarchy of reconfigurable digital logic, combining programmable logic blocks, block RAM, programmable I/O, and clocking resources. Compared with fixed-function ASICs, an FPGA allows a design to be revised in software without fabricating a new silicon device, which is valuable for industrial control, communications, imaging, and test equipment. The LFE2-50E-5F672I provides 48,000 logic elements organized into 6,000 LABs/CLBs, along with 396,288 bits of RAM and 500 I/O pins. Its -5 speed designation identifies the performance grade, while the industrial temperature designation supports use in industrial equipment. The 672-FPBGA package provides a high pin count and compact 27 mm by 27 mm body for designs requiring extensive connectivity. The ECP2 architecture also supports DSP-oriented logic, embedded memory, and programmable I/O functions. Technically, the device consolidates parallel processing, serial interfaces, control logic, and dedicated memory functions into one reconfigurable device. This can reduce the number of supporting ICs and simplify board partitioning compared with a design assembled from multiple programmable logic devices and discrete components. Engineers must still budget routing density, pin assignment, power delivery, clocking, configuration storage, and thermal performance for the large BGA footprint. Typical uses include industrial automation controllers, data-acquisition systems, video and image-processing pipelines, network interface equipment, test-and-measurement instruments, embedded communications systems, and sensor-processing platforms. The 500-I/O capability is particularly useful when a design connects multiple converters, memories, transceivers, and control peripherals while retaining logic resources for protocol and state-machine implementation. PCB implementation requires careful BGA escape routing, power-plane design, decoupling, and thermal analysis. Follow the manufacturer pinout and package information when assigning balls, and verify configuration, clock, and I/O standards against the ECP2 design documentation. Migration to another FPGA should not be assumed from package similarity alone because logic resources, I/O standards, speed grade, and device identifiers must also match. This page combines the exact LFE2-50E-5F672I configuration, package details, application guidance, and a parameter-focused comparison with identified ECP2 alternatives. It also highlights the practical constraints that matter during schematic design, BGA layout, power planning, and production sourcing.

RFC Hubungi kami
LFE2-50E-6F484C - 48K LUT ECP2 FPGA | Lattice
LFE2-50E-6F484C

LFE2-50E-6F484C - 48K LUT ECP2 FPGA | Lattice

The Lattice Semiconductor LFE2-50E-6F484C is an ECP2-series field-programmable gate array with 48,000 logic elements, 6,000 LUTs, 396,288 bits of distributed RAM, and up to 339 user I/O in a 484-BBGA package. It operates from a 1.14 V to 1.26 V core supply and is identified as a 1.2 V, -6 speed-grade device. These headline parameters position it for programmable control, interface, signal-processing, and embedded systems requiring moderate logic density and extensive I/O. An FPGA is a programmable semiconductor whose digital logic, interconnect, and I/O behavior are defined after fabrication through a configuration bitstream. Within the product hierarchy, the LFE2-50E-6F484C is a field-programmable gate array, specifically a member of the Lattice ECP2 family and the broader integrated-circuit and semiconductor categories. Compared with a fixed-function ASIC, it permits design revisions, field updates, and adaptation to multiple hardware configurations without changing the PCB. Key features include a nominal 50,000-cell FPGA implementation, 6,000 LUTs, and 396,288 bits of distributed RAM. The device provides 339 user I/O according to distributor listings, making the 484-ball package suitable for designs that need more external connections than a smaller FPGA can offer. Its 1.2 V operating class supports low-voltage digital systems, while the -6 ordering code identifies the device's performance grade. The ECP2 architecture is intended to combine programmable logic with embedded memory resources in a single package. Distributed RAM can be used for buffers, lookup functions, small state machines, and data transformations without requiring external memory for every small storage requirement. The available verified sources do not state the exact number of DSP blocks, PLL count, supported I/O standards, maximum clock frequency, or internal memory organization, so these values must be confirmed in the manufacturer datasheet before design release. Typical uses include industrial automation, test and measurement, communications interfaces, embedded control, video or display control, and general-purpose signal processing. The large I/O count is particularly useful when a design must bridge multiple buses, converters, memories, LEDs, connectors, and communication transceivers while retaining a reconfigurable logic fabric. Designers should confirm power sequencing, decoupling, configuration interface requirements, ball assignments, and high-speed layout constraints against the official LatticeECP2/M family data sheet. Because the supplied web results do not expose a complete 484-ball pin map, the package drawing should not be inferred from a generic BGA layout. This page consolidates the verified distributor specifications, family-level substitute information, application guidance, and design cautions so engineers can compare the LFE2-50E-6F484C against pin-compatible ECP2 options without treating package similarity as proof of complete interchangeability.

RFC Hubungi kami
LFE2-50E-6F484I - 48K LUT ECP2 FPGA | Lattice Semiconductor
LFE2-50E-6F484I

LFE2-50E-6F484I - 48K LUT ECP2 FPGA | Lattice Semiconductor

Lattice Semiconductor LFE2-50E-6F484I is an ECP2 field-programmable gate array with 48,000 logic elements, 339 I/O, 396,288 embedded-memory bits, and a 484-ball FBGA package. It operates from a nominal 1.2 V core supply, with a listed operating range of 1.14 V to 1.26 V, and is built on 90 nm process technology. The -6 speed designation identifies its performance grade, while the I suffix identifies the industrial-temperature ordering option. An FPGA is a programmable semiconductor used to implement digital logic, control functions, interfaces, and signal processing in reconfigurable hardware. Within the product hierarchy, the LFE2-50E-6F484I is an ECP2 FPGA, a field-programmable gate array, and a member of the broader programmable-logic and semiconductor categories. Unlike a fixed-function logic IC, an FPGA allows its configuration bitstream to be changed during design, debugging, or product updates. The device's principal features include 48,000 logic elements, 339 user I/O, 396,288 bits of embedded memory, a 1.2 V nominal supply, and a -6 speed grade. The large I/O count supports connections to external processors, memories, converters, and industry-standard digital interfaces. Its industrial ordering designation supports use in equipment expected to operate outside consumer-only temperature environments, although exact minimum and maximum junction or ambient limits should be confirmed in the manufacturer datasheet. The 484-FBGA package uses 23 mm by 23 mm square construction and surface-mount assembly. This is a high-ball-count package intended for compact, multilayer printed-circuit-board layouts. The ECP2 architecture combines configurable logic and embedded memory to support parallel data processing, control logic, communications interfaces, and general-purpose embedded systems. Configuration programming and the device's supported I/O standards should be validated against the intended board schematic before layout release. Typical applications include industrial control equipment, embedded communications systems, data-acquisition and signal-processing modules, video-format conversion, and compact embedded platforms requiring a high pin count. Its 339 I/O make it particularly relevant where parallel buses, control signals, and multiple external interfaces must coexist in one programmable device. The industrial-grade ordering option also makes it suitable for platforms designed around long-life embedded control and communications subsystems. PCB implementation requires careful BGA fanout, controlled-impedance routing, and a solid ground-and-power distribution network. Use the manufacturer package drawing and pinout when assigning all 484 balls, and follow the recommended power, decoupling, configuration, and clocking layouts. Because the package exposes many balls and supports a broad I/O count, verify pin multiplexing and voltage constraints in the design tool before finalizing board connections. This page consolidates the ECP2 device's key resource counts, package characteristics, ordering information, replacement considerations, and practical implementation guidance. It also distinguishes speed-grade and ordering-suffix alternatives from true cross-manufacturer drop-in options, helping engineers evaluate whether a proposed substitution preserves package, logic resources, I/O availability, and timing expectations.

RFC Hubungi kami
LFE2-50E-6F672C - 48K LUT 500-I/O ECP2 FPGA | Lattice
LFE2-50E-6F672C

LFE2-50E-6F672C - 48K LUT 500-I/O ECP2 FPGA | Lattice

Lattice Semiconductor LFE2-50E-6F672C is an ECP2 field-programmable gate array with 48,000 logic elements, 500 programmable I/O, 396,288 RAM bits, and a 1.2 V core voltage in a 672-ball BGA package. It is positioned for embedded systems requiring programmable logic, parallel interfaces, control functions, and dedicated DSP operations without a mask change. An FPGA is a programmable semiconductor categorized as a digital logic IC and a programmable logic device. By storing configuration data in on-chip memory, an FPGA can implement combinational and sequential logic after manufacture. Within the system hierarchy, the LFE2-50E-6F672C belongs to the ECP2 family of low-power FPGAs, combining configurable logic blocks, block RAM, programmable I/O, and DSP resources in one device. The device provides 48,000 logic elements and 500 programmable I/O pins, allowing multiple external interfaces to be assigned as required by the design. Its 396,288 bits of RAM support buffering, data tables, packet storage, and general-purpose state. The -6 speed designation identifies the device performance grade, while the 1.2 V core voltage indicates the principal internal supply used by the ECP2 logic core. Built using 90 nm FPGA technology, the LFE2-50E-6F672C integrates advanced DSP blocks for arithmetic and signal-processing workloads. The 672-ball BGA package offers a high pin count for demanding interface-rich designs, but it also requires a multilayer PCB with fine-pitch escape routing, careful ground distribution, and process-controlled assembly. The exact pin names and electrical limits should be assigned from the manufacturer pin-description table before layout release. Typical applications include industrial control and factory automation, communication interfaces, instrumentation, embedded video or display control, and general-purpose digital signal processing. It is also suitable for prototype systems that require parallel data collection, protocol conversion, or deterministic control where multiple programmable interface channels and on-chip logic are more useful than a fixed application-specific controller. The primary design trade-off is routing complexity. A 672-ball BGA offers substantial connectivity but demands accurate ball maps, via-in-pad or fan-out strategies, plane continuity, and assembly yield controls. Confirm power, clock, configuration, and I/O requirements against the manufacturer datasheet, and prototype the BGA footprint before committing a production board to the 672-ball package. This page organizes the core ECP2 specifications, verified source links, drop-in replacement constraints, package considerations, and practical application guidance into an engineering-focused resource for FPGA selection and PCB planning.

RFC Hubungi kami
LFE2-50E-6F672I - 48K ECP2 FPGA, 500 I/O | Lattice
LFE2-50E-6F672I

LFE2-50E-6F672I - 48K ECP2 FPGA, 500 I/O | Lattice

Lattice Semiconductor LFE2-50E-6F672I is an ECP2 series field-programmable gate array in a 672-ball FBGA package, designed for high-density programmable logic systems with 48,000 logic elements, 6,000 LUTs, 500 I/O pins, and 396,288 bits of on-chip RAM. The device operates with a 1.2 V core supply and is identified with a speed grade of -6 and an industrial temperature designation. An FPGA is a semiconductor device whose digital logic is configured after manufacture. The LFE2-50E-6F672I belongs to the ECP2 family of FPGAs, combining configurable logic, embedded block RAM, programmable I/O, and DSP resources in one package. This makes it suitable when a design requires parallel interface handling, control logic, signal processing, or hardware acceleration that would be difficult to implement economically with fixed-function devices. The main architectural resource in this device is 48,000 logic elements organized as 6,000 LUTs or Logic Array Blocks. The device also provides 396,288 bits of on-chip RAM for data buffering, packet handling, lookup functions, and embedded storage. Its 500 I/O pins provide substantial connectivity for buses, parallel data channels, control signals, memory interfaces, and high-pin-count external components. The 672-ball FBGA package supports dense board-level integration and requires careful escape-routing and thermal design. Typical applications include industrial control systems, communications equipment, test and measurement platforms, video and image-processing modules, embedded data-acquisition systems, and high-speed interface adapters. The large I/O count is particularly useful when a board must connect an FPGA directly to multiple memory devices, converters, transceivers, and parallel logic sections. The ECP2 architecture also allows designers to update functionality through programmable configuration rather than changing fixed hardware. The principal design consideration is that the -6 speed grade and industrial temperature suffix must match the system timing and environmental requirements. The 672-ball package also demands a multilayer PCB with short, matched escape routes for high-speed signals. Designers should review the ECP2 pinout, power-decoupling requirements, configuration interface, clocking scheme, and I/O standards in the manufacturer documentation before releasing a PCB layout. This product page combines the LFE2-50E-6F672I ordering information, core ECP2 resource details, package characteristics, application guidance, and design considerations. It is intended to help engineers determine whether the device's logic density, memory resources, I/O count, speed grade, and package are suitable for a new programmable-logic design.

RFC Hubungi kami
LFE2-50E-7F484C - 48K ECP2 FPGA, 420MHz | Lattice Semiconductor
LFE2-50E-7F484C

LFE2-50E-7F484C - 48K ECP2 FPGA, 420MHz | Lattice Semiconductor

Lattice Semiconductor LFE2-50E-7F484C is an ECP2 field-programmable gate array with 48,000 logic elements, 396,288 RAM bits, 339 I/O, and a maximum operating frequency of 420 MHz, packaged in a 484-ball BGA. The device combines programmable logic, embedded memory, and programmable I/O in a single surface-mount semiconductor for complex digital control, interface, and signal-processing systems. A field-programmable gate array is a programmable-logic semiconductor whose interconnected logic blocks, memory, and I/O can be configured after manufacture. An FPGA belongs to the programmable-logic hierarchy above fixed-function logic devices and below broader digital semiconductors. ECP2 devices sit between low-capacity programmable logic and larger FPGAs, providing moderate logic density, embedded RAM, and performance for control-plane, communications, instrumentation, and embedded-processing designs. The ECP2 family provides 48,000 logic elements, equivalent to 48K LUTs, together with 396,288 total RAM bits. The LFE2-50E-7F484C provides 339 I/O and supports operation up to 420 MHz. These resources allow parallel datapaths, state machines, protocol handling, and control logic to be consolidated without using a separate collection of discrete logic devices. The “-7” portion identifies the device speed grade, while the “F484C” portion identifies the 484-ball package configuration. The suffix and ordering code also convey the ordering package and temperature or grade details defined by Lattice Semiconductor. Designers should consult the manufacturer ordering guide before treating two similarly named ECP2 devices as interchangeable because package, speed grade, series, and qualification can differ. Typical applications include industrial automation, communications infrastructure, test and measurement equipment, embedded control, and digital signal processing. The 48K logic-element capacity is especially useful when a design needs parallel interfaces or substantial state-machine logic, while the 339 I/O provide connections for external memories, converters, transceivers, and control signals. PCB implementation requires careful attention to the dense 484-ball BGA footprint, power delivery, decoupling, and routing escape requirements. Ball assignment, voltage rails, configuration pins, and I/O constraints must be taken directly from the pin-description tables because a full pin list cannot be reconstructed safely from a distributor summary. This page consolidates capacity, memory, I/O, frequency, package, lifecycle, and migration information into an engineering-focused comparison. It also distinguishes verified drop-in family options from broader functional alternatives and highlights the checks required before replacing an FPGA in an existing PCB design.

RFC Hubungi kami
LFE2-50E-7F672C - 48K LUT ECP2 FPGA, 500 I/O | Lattice Semiconductor
LFE2-50E-7F672C

LFE2-50E-7F672C - 48K LUT ECP2 FPGA, 500 I/O | Lattice Semiconductor

The Lattice Semiconductor LFE2-50E-7F672C is an ECP2 field-programmable gate array with 48,000 logic elements, 500 user I/Os, 396,288 total RAM bits, and a 1.2 V operating supply in a 672-FPBGA package measuring 27 mm by 27 mm. It is designed for configurable digital logic, embedded control, interface bridging, signal processing, and low-power programmable logic applications. An FPGA is a programmable-logic semiconductor whose lookup tables, registers, interconnect resources, memory blocks, and programmable I/O are configured after fabrication. The LFE2-50E-7F672C belongs to the Lattice ECP2 family, where programmable logic provides a practical alternative to a custom ASIC when logic requirements are still evolving. Its 48,000 logic elements support general-purpose control, datapath, interface, and glue-logic implementations. The device provides 500 user I/Os, enabling dense connections between external memories, processors, transceivers, sensors, and display or communication interfaces. Its 396,288 total RAM bits provide on-chip storage for buffers, lookup tables, packet handling, and control state. The -7 speed designation and 1.2 V supply position it as a performance-oriented ECP2 option for systems requiring substantial logic density in a single package. The 672-FPBGA package is intended for surface-mount assembly and requires careful ball-grid-array PCB design, including adequate escape routing, power delivery, and thermal management. Because the package contains hundreds of balls, designers should use the manufacturer’s package information, pinout data, and design tools when assigning signals and planning decoupling. The ECP2 architecture is useful when a design needs programmable update capability, multiple interface options, or a shorter path from prototype to volume hardware than a fixed-function ASIC. Typical uses include industrial automation, communications infrastructure, embedded systems, test equipment, video and display control, sensor aggregation, and general-purpose digital signal processing. The device is especially appropriate when the design needs substantial I/O density and logic capacity but does not require the power, performance, or software ecosystem of a higher-end FPGA. For implementation, prioritize power planning, high-speed routing constraints, and the manufacturer’s recommended ball-assignment and decoupling practices. This page combines the product’s core ECP2 specifications with practical design considerations, application guidance, and a comparison framework for engineers evaluating the LFE2-50E-7F672C against related ECP2 devices.

RFC Hubungi kami
LFE2-6E-5F256C - 6K Lattice ECP2 FPGA, 190 I/O | Lattice
LFE2-6E-5F256C

LFE2-6E-5F256C - 6K Lattice ECP2 FPGA, 190 I/O | Lattice

The Lattice Semiconductor LFE2-6E-5F256C is a 6,000-cell ECP2 field-programmable gate array with 190 user I/O, 56,320 RAM bits, and a 256-pin FBGA package, optimized for 1.2 V operation. It combines programmable logic, block RAM, and DSP resources in a reconfigurable semiconductor for embedded control, communications, and signal-processing systems. The device operates from 1.14 V to 1.26 V and is specified for a 0°C to 85°C operating junction-temperature range. An FPGA is a programmable digital integrated circuit that can be configured after manufacture to implement logic, state machines, interfaces, and parallel processing functions. The LFE2 family belongs to the broader field-programmable logic and semiconductor hierarchy. Compared with a fixed-function application-specific integrated circuit, an FPGA allows design changes to be implemented through configuration rather than a new silicon layout, making it useful for prototypes, industrial equipment, communications infrastructure, and embedded systems. The LFE2-6E-5F256C provides 6,000 logic elements organized into 750 logic array blocks and includes 56,320 total RAM bits. The verified distributor data identifies 190 user I/O, a 1.2 V supply class, and a 256-FPBGA package measuring 17 x 17 mm. These resources make the device suitable for designs requiring parallel control logic, moderate memory buffering, protocol bridging, and programmable digital signal processing. Lattice ECP2 devices are also positioned for designs that need flexible logic density without the scale of a larger FPGA. The 90 nm ECP2 implementation combines programmable logic with advanced DSP blocks; high-speed SERDES capability is associated with the ECP2M family rather than being assumed for every ECP2 member. For the LFE2-6E-5F256C specifically, design engineers should use the manufacturer datasheet and package documentation to confirm configuration, I/O standards, clocking, power, and exposed-ball assignments before layout. Typical applications include industrial control systems, communications and protocol interfaces, embedded instrumentation, audio and general digital signal processing, data acquisition front ends, and compact embedded processors. Its 190 I/O and 56,320 RAM bits allow the FPGA to connect external memory or peripherals while offloading time-critical logic from a host processor. The 256-pin FBGA footprint also requires careful PCB routing and thermal design because the dense package can make escape routing and power delivery more demanding than a leaded package. When selecting this device, match the FPGA logic, RAM, DSP, clock, I/O, speed-grade, temperature, and power requirements to the exact system specification. A different FPGA with a similar cell count may require different tools, configuration handling, package balls, or I/O standards. This page combines verified distributor specifications, package information, and application guidance; exact pricing and stock status must be confirmed for the current purchase date. This product-data summary is intended to make the LFE2-6E-5F256C searchable for FPGA selection, package matching, and replacement evaluation without implying that every similarly packaged FPGA is pin-to-pin compatible.

RFC Hubungi kami