Produk (44,000+)

LM293AN - Dual Open-Collector Comparator | STMicroelectronics
LM293AN

LM293AN - Dual Open-Collector Comparator | STMicroelectronics

The STMicroelectronics LM293AN is a low-power dual voltage comparator with two independent comparator channels, open-collector and open-drain outputs, and an 8-DIP package. The device is designed for general-purpose signal comparison and can operate from a single supply over a wide voltage range, while split-supply operation is also possible. Its listed rail-to-rail input designation, ground-referenced common-mode capability, and TTL, MOS, and CMOS output compatibility make it suitable for threshold detection, level translation, and analog-control systems. A voltage comparator is an integrated circuit that compares two input voltages and produces a logic-level indication of their relationship. In this role, LM293AN belongs to the comparator IC hierarchy within analog and mixed-signal semiconductors. Each of its two channels can evaluate a non-inverting input against an inverting input, allowing one package to perform two related comparisons while keeping channel operation independent. The LM293 family documentation identifies low power consumption as a defining characteristic and specifies input-offset voltage as low as 2.0 mV maximum for the associated two-comparator family. Open-collector outputs provide flexibility when the destination device requires a pull-up resistor, particularly in wired logic, relay-driver, and legacy digital-interface applications. The outputs are also listed as compatible with TTL, MOS, and CMOS logic families. Operation from a single supply is central to the device design. The common-mode input range includes ground, while the differential input voltage can extend to the maximum-rated supply voltage of ±38 V according to TI's LM293 family information. The 8-DIP mechanical format provides through-hole access to the two comparator channels, power, ground, and output connections. Typical uses include industrial control thresholds, sensor-interface decisions, window comparators, oscillator and timer designs, and general logic level conditioning. The two independent channels can also implement a larger comparator arrangement through external resistor networks. Open-collector outputs make pull-up selection an important part of the interface design because the output cannot directly drive a logic high without this external support. The main design consideration is that open-collector outputs require correctly selected pull-up resistors and adequate logic-level rise time at the driven node. Supply decoupling, input-source impedance, output load, and common-mode headroom should be reviewed against the application's operating conditions. This page consolidates the verified device identity, package information, sourcing links, and practical comparator-selection guidance.

RFC Hubungi kami
LM293D - Dual Differential Comparator, 8-SOIC | TI
LM293D

LM293D - Dual Differential Comparator, 8-SOIC | TI

The Texas Instruments LM293D is a dual differential comparator designed for low-voltage operation from a single supply or split supplies. The verified distributor listing identifies it as a standard general-purpose comparator with open-collector, open-drain, rail-to-rail operation in an 8-SOIC package. The device contains two independent comparator channels, making it suitable for threshold detection, level shifting, window monitoring, and basic analog control systems. According to the Texas Instruments LM293 product page, the device is a dual differential comparator in an industrial-grade family; detailed electrical limits are not supplied in the verified excerpts and therefore remain marked for data completion. A comparator is an analog signal-conditioning IC that compares two input voltages and produces a logic-level output indicating which input is higher. A differential comparator belongs to the broader comparator, amplifier, and analog interface hierarchy, while the LM293D is specifically a low-power, dual-channel comparator for embedded and control applications. Its two independent channels allow simultaneous comparison of two signal pairs, provided the device operates within the manufacturer-rated common-mode and supply limits. The verified TI page states that the LM293 family supports wide supply-voltage operation, including systems using split power supplies. TI also states that the B-version is a drop-in replacement for LM293, LM393, and LM2903; however, the provided data does not establish that every related suffix is electrically identical for every use condition. The LM293D listing identifies open-collector/open-drain and rail-to-Rail output characteristics, which are important when interfacing with pull-up-based digital systems. Typical uses include monitoring a battery or power rail, detecting sensor thresholds, comparing external reference voltages, and implementing basic overvoltage or undervoltage indication. The open-drain output requires an external pull-up resistor when the output must rise to a defined logic level. Because the verified data does not provide exact input-offset, response-time, supply-current, or temperature values, those specifications are retained as data-needed markers rather than inferred from related devices. For PCB design, place the IC close to the compared signals and use short, low-noise routing for high-impedance input nodes. Keep pull-up resistors close to open-drain outputs, and account for input common-mode range and supply polarity in both single-supply and split-supply systems. The LM293D is not a power semiconductor, so SOA data is not applicable.

RFC Hubungi kami
LM293DG - Dual Precision Comparator, 2-36V, SOIC-8 | onsemi
LM293DG

LM293DG - Dual Precision Comparator, 2-36V, SOIC-8 | onsemi

The onsemi LM293DG is a dual independent precision voltage comparator in an 8-pin SOIC package, built for single or split supply operation across a 2 V to 36 V supply range. Each channel offers an input offset voltage as low as 2.0 mV, a 1.3 microsecond response time, and a supply current of about 400 microamps per channel, with an open-collector (open-drain) output stage compatible with TTL, MOS and CMOS logic. A comparator is a differential amplifier used as a simple decision element: it compares two input voltages and switches its output state when the non-inverting input rises above the inverting input. The comparator category sits above discrete transistor switches in the signal-conditioning hierarchy and below instrumentation amplifiers in the analog IC family, sitting in the amplifier IC / signal conditioning control group of parts such as op amps, references and sensor interface ICs. The LM293 series is distinguished from general-purpose comparators by its low input offset voltage, wide supply range and ability to operate with the common-mode input range extending to ground, which makes it a strong fit for single 5 V or single 12 V systems where the signal of interest lives near the negative rail. The two channels are fully independent, each with its own pair of inputs and output. The open-collector output stage is the key architectural feature: the output transistor sinks current but never sources it, so an external pull-up resistor to the supply or logic rail is required to establish a valid high level. That architecture permits level shifting to any voltage up to the maximum supply, wired-AND bus tying, and direct drive of relay or solenoid drivers without a buffer stage. Because the output stage is a bipolar NPN transistor, output sink current is limited compared with modern CMOS comparators. Typical applications include overvoltage and undervoltage protection in linear and switching power supplies, battery and pack monitoring window comparators, motor stall and over-current detection, industrial sensor thresholding, and automotive-style sensor protection. The SOIC-8 package with 1.27 mm lead pitch supports both through-hole assembly and standard surface mount reflow, and the -25 C to +85 C ambient range covers industrial and consumer equipment. When designing with the LM293DG, always fit a pull-up resistor on each output and check the sink current against the pull-up value and the load. If your design needs rail-to-rail input operation, push-pull outputs, or a supply below 2 V, a CMOS comparator is the better choice; if it needs low offset with wide supply and open-drain flexibility, the LM293DG remains a proven, low-cost choice. This page consolidates manufacturer specifications, drop-in replacement candidates, pin-level detail and practical design guidance so that you can qualify the LM293DG for an existing board revision without redrawing the footprint.

RFC Hubungi kami
LM293DGKR - Dual 2-36V Comparator | Texas Instruments
LM293DGKR

LM293DGKR - Dual 2-36V Comparator | Texas Instruments

The Texas Instruments LM293DGKR is a dual differential comparator with two independent comparator channels, a 2 V to 36 V supply range, and a 300 ns response time, housed in an 8-pin VSSOP package. Each channel uses open-collector output architecture, making the device suitable for wired logic interfaces, threshold detection, and systems requiring a pull-up resistor. A differential comparator is an analog integrated circuit that compares two input voltages and produces a binary output indicating which input is higher. The LM293 belongs to the voltage-comparator hierarchy within interface and signal-conditioning semiconductors. Its two channels can operate independently, allowing one package to perform two comparison functions while reducing board area and simplifying component procurement. The principal operating characteristics include a 2 V to 36 V supply range, a 300 ns response time, and approximately 200 uA supply current. The open-collector outputs can sink useful levels of output current while the external pull-up resistor determines the high output voltage. Rail-to-rail input operation is identified for this device, while its industrial operating range of -40 C to +85 C supports laboratory, control-system, and industrial equipment. Each internal channel compares its noninverting and inverting inputs. Because the outputs are open collector, both channels can be tied together when wired-OR logic is required. The low output saturation behavior also permits direct interfacing with TTL, MOS, and CMOS-compatible external circuitry. Separate ground, supply, input, and output connections make the device straightforward to use in both single-supply and split-supply arrangements, subject to the applicable input limits. Typical uses include power-rail monitoring, industrial sensor threshold detection, battery and charger supervision, window-comparator circuits, control-loop signal conditioning, and logic-level translation where an open-drain interface is advantageous. The dual-channel configuration is particularly useful when a design requires two related decisions, such as an upper threshold and a lower threshold around the same monitored quantity. Designers should select an external pull-up resistor for each open-collector output and confirm that its resistance keeps output rise time and sink current within system requirements. Input and supply connections should be kept short, with suitable local bypassing placed close to the device. Thermal and common-mode limits must be checked across the full operating range, especially in industrial systems with long wiring and noisy power sources. This product overview combines the LM293 family identity, verified package and ordering information, practical comparator design guidance, drop-in family alternatives, and a specification comparison intended to accelerate component selection and PCB planning.

RFC Hubungi kami
LM293DMR2 - Dual Precision Comparator, 36 V | onsemi
LM293DMR2

LM293DMR2 - Dual Precision Comparator, 36 V | onsemi

The onsemi LM293DMR2 is a dual low-offset voltage comparator with two independent comparison channels, a 2 V to 36 V supply range, open-collector outputs, and an 8-pin TSSOP package. Each channel can operate from single or split power supplies, allowing common-mode input signals to approach ground during single-supply operation. The low input offset voltage, specified as low as 2.0 mV, supports accurate threshold detection in industrial, automotive, and consumer circuits. A voltage comparator is an analog signal-conditioning IC that compares two input voltages and produces a digital logic state at its output. The LM293 belongs to the comparator hierarchy, which includes differential comparators, window comparators, and precision comparators. By converting an analog threshold relationship into an open-collector logic indication, this type of device bridges analog measurement circuits and digital control, monitoring, or protection systems. The principal features include two independent comparators, low offset voltage, a common-mode input range extending to ground under single-supply operation, and open-collector outputs that can sink current from multiple compatible devices. The 2 V to 36 V operating supply range accommodates 5 V, 12 V, and 24 V systems. The onsemi datasheet also identifies the device as suitable for consumer, automotive, and industrial applications where reliable voltage-level detection is required. Each comparator channel is independent, allowing one device to perform two unrelated threshold measurements. The open-collector architecture requires an external pull-up resistor and provides a wired-output capability when several comparator outputs share a bus. This architecture does not actively drive the output high, but it offers flexible voltage-level adaptation and enables wired-AND behavior when output collectors are connected. Typical uses include monitoring a 12 V or 24 V automotive battery, detecting overvoltage and undervoltage conditions in industrial power systems, comparing sensor outputs with adjustable thresholds, and providing simple supervisory functions in consumer equipment. The grounded common-mode capability is especially useful in single-supply systems where the signal of interest begins near 0 V and cannot be compared reliably by a comparator with a restricted input range. For robust PCB implementation, place input resistors close to the comparator pins to limit differential pickup and route the inputs away from switching nodes and high-current paths. Select the external output pull-up for the intended logic voltage, and confirm that its maximum sink current remains within the device output ratings. Check that the common-mode and differential input voltages remain within the absolute maximum limits during power transients. This product page combines the manufacturer specifications, package and pin information, drop-in replacement analysis, comparison data, and practical PCB guidance to accelerate design review and sourcing. The technical recommendations focus on preserving the LM293DMR2 role as a reliable, low-offset dual comparator while making package, electrical, and supply constraints explicit before layout release.

RFC Hubungi kami
LM293DR - Dual Differential Comparator, 8-SOIC | TI (Tape & Reel)
LM293DR

LM293DR - Dual Differential Comparator, 8-SOIC | TI (Tape & Reel)

The Texas Instruments LM293DR is a dual differential comparator designed for low-voltage operation from a single supply or split supplies. The verified distributor listing identifies it as a standard general-purpose comparator with open-collector, open-drain, rail-to-rail operation in an 8-SOIC package. The device contains two independent comparator channels, making it suitable for threshold detection, level shifting, window monitoring, and basic analog control systems. According to the Texas Instruments LM293 product page, the device is a dual differential comparator in an industrial-grade family; detailed electrical limits are not supplied in the verified excerpts and therefore remain marked for data completion. A comparator is an analog signal-conditioning IC that compares two input voltages and produces a logic-level output indicating which input is higher. A differential comparator belongs to the broader comparator, amplifier, and analog interface hierarchy, while the LM293DR is specifically a low-power, dual-channel comparator for embedded and control applications. Its two independent channels allow simultaneous comparison of two signal pairs, provided the device operates within the manufacturer-rated common-mode and supply limits. The verified TI page states that the LM293 family supports wide supply-voltage operation, including systems using split power supplies. TI also states that the B-version is a drop-in replacement for LM293, LM393, and LM2903; however, the provided data does not establish that every related suffix is electrically identical for every use condition. The LM293DR listing identifies open-collector/open-drain and rail-to-Rail output characteristics, which are important when interfacing with pull-up-based digital systems. Typical uses include monitoring a battery or power rail, detecting sensor thresholds, comparing external reference voltages, and implementing basic overvoltage or undervoltage indication. The open-drain output requires an external pull-up resistor when the output must rise to a defined logic level. Because the verified data does not provide exact input-offset, response-time, supply-current, or temperature values, those specifications are retained as data-needed markers rather than inferred from related devices. For PCB design, place the IC close to the compared signals and use short, low-noise routing for high-impedance input nodes. Keep pull-up resistors close to open-drain outputs, and account for input common-mode range and supply polarity in both single-supply and split-supply systems. The LM293DR is not a power semiconductor, so SOA data is not applicable.

RFC Hubungi kami
LM293DR2G - Dual 36V Comparator | onsemi | Signal Control
LM293DR2G

LM293DR2G - Dual 36V Comparator | onsemi | Signal Control

The onsemi LM293DR2G is a dual precision voltage comparator rated for 2 V to 36 V operation, with a 1.3 µs response time and open-collector, open-drain outputs in an 8-pin SOIC package. The device contains two independent comparator channels and can operate from a single supply or split supplies, making it suitable for industrial threshold detection, sensing, and control circuits. A voltage comparator is an analog signal-conditioning device that compares two input voltages and changes its output state when the non-inverting input exceeds the inverting input. Within the broader hierarchy of semiconductor components, the LM293DR2G belongs to the comparator category, analog signal-conditioning ICs, and power-management-adjacent control devices. Its two independent channels allow one package to perform two comparisons while sharing a common supply and ground. The principal operating characteristics include a 2 V to 36 V supply range, a 1.3 µs response time, and a dual open-collector output architecture. The output structure can sink useful load current and requires an appropriate pull-up arrangement when driving subsequent digital stages. According to the onsemi LM293 family information, input offset voltage can be as low as 2.0 mV, while the LM293 series is designed for common-mode input operation down to ground with single-supply operation. Each internal channel has differential inputs and an independently controlled output. Separate inputs allow the circuit designer to define the polarity of each decision, while separate output stages provide isolation between the two comparator functions. The 8-pin SOIC package supports conventional surface-mount assembly, but exposed-pad thermal management is not part of this package. Exact offset-voltage limits, input bias current, output-current limits, and channel-matching figures should be selected from the ordering information for the exact grade. Typical uses include industrial sensor thresholds, motor and actuator control, power-supply monitoring, window or level detection, and general signal conditioning. In these systems, the comparator converts an analog relationship between two voltages into a logic-compatible indication that downstream control logic can process. The 36 V maximum supply capability is especially useful when the sensing circuit operates from an industrial bus rather than a low-voltage logic rail. For dependable operation, treat each open-drain output as requiring a pull-up to the supply used by the receiving logic. Keep input and feedback traces short, provide a local supply bypass capacitor, and confirm that input voltages remain within the applicable common-mode and absolute-maximum limits. Account for output rise time after the pull-up resistor is added because the stated 1.3 µs response describes comparator propagation behavior, not the complete RC-controlled transition at the output node. This product record combines the manufacturer family description with package, supply, temperature, and response-time details, then adds application guidance, pin-level implementation notes, and same-footprint comparison choices. These engineering views help designers evaluate the LM293DR2G as a dual comparator rather than treating it only as an eight-pin logic IC.

RFC Hubungi kami
LM293DRG3 - Dual Differential Comparator | Texas Instruments
LM293DRG3

LM293DRG3 - Dual Differential Comparator | Texas Instruments

The Texas Instruments LM293DRG3 is a dual differential voltage comparator in an 8-pin SOIC package. The device contains two independent comparison channels, supports ±15 V single-ended or 30 V total supply operation, and provides open-collector, open-drain outputs compatible with TTL, MOS, and CMOS logic. Its common-mode input range includes ground, allowing operation from a single positive supply, while the differential input range can extend to ±38 V. A voltage comparator is an analog integrated circuit that compares two input voltages and changes its output state when the difference crosses a defined threshold. The LM293 belongs to the comparator hierarchy, which also includes differential comparators and open-collector interface comparators. These devices bridge low-level analog sensing and digital control by converting an analog condition into a logic-readable result. The LM293DRG3 offers two independent comparators, rail-to-rail output behavior, and low output saturation voltage. Its open-collector outputs permit wired-AND connections and external pull-up selection, making the device adaptable to different logic families and voltage domains. The common-mode input range including ground is particularly useful in battery-powered and industrial systems powered from a single rail. Each channel compares a non-inverting input with an inverting input and uses open-drain output transistors to indicate the polarity of the differential voltage. The outputs can sink current while remaining in a high-impedance state when inactive. Because the output stage does not actively drive a high voltage, pull-up resistors are required when a logic-high level is needed. Differential input protection and common-mode limits must be respected during fault conditions. Typical uses include monitoring a sensor output, detecting supply thresholds, comparing an analog measurement with a reference, generating window-limit signals, and supporting industrial control logic. Two independent channels allow related threshold functions to be implemented in one package, reducing component count while preserving separate input and output isolation. Designers should select pull-up resistors to suit the destination logic voltage and sink-current budget, connect an unused comparator input to a defined valid potential, and verify input and output behavior across the full supply range. This page combines ordering information, package details, drop-in replacement guidance, comparison data, and practical design guidance for faster component selection.

RFC Hubungi kami
LM293DRG4 - Dual Open-Collector Comparator | Texas Instruments
LM293DRG4

LM293DRG4 - Dual Open-Collector Comparator | Texas Instruments

The Texas Instruments LM293DRG4 is a dual differential comparator with two independent channels, open-collector outputs, and an 8-pin SOIC package. It supports single-supply operation over a wide voltage range and dual-supply operation when the total supply difference is between 2 V and 36 V. Each channel compares an inverting input with a non-inverting input and provides a logic-compatible indication of the input relationship. A comparator is an analog integrated circuit that evaluates two voltages and changes its output state when one input crosses the other. Within the signal-chain hierarchy, the LM293 belongs to the comparator class, which sits alongside amplifiers and other analog interface ICs used to convert continuous voltage relationships into binary logic decisions. The LM293's open-collector outputs are useful when a system needs a pulled-up logic signal, wired logic, level translation, or an adjustable output rise time. The LM293 family is specified as a dual differential comparator for industrial applications. The LM293DRG4 ordering code identifies the 8-SOIC package and tape-and-reel shipping configuration. Its two channels are independent, allowing one device to implement two threshold decisions. Open-collector outputs also permit multiple devices to share a common pull-up bus when the system designer confirms that the resulting wired-AND behavior is intentional. The device can operate from a single supply or from positive and negative supplies. The manufacturer states that the common-mode input range includes ground, that the differential input range equals the maximum-rated supply voltage, and that the output is compatible with TTL, MOS, and CMOS logic. The LM293B version is identified as a drop-in replacement for LM293, LM393, and LM2903 families, providing a useful basis for qualified equivalent selection. Typical applications include power-supply threshold detection, sensor-signal conditioning, industrial control interfaces, battery monitoring, and digital logic level translation. In a sensor interface, the non-inverting input can receive a reference voltage while the inverting input receives the sensed signal, allowing the open-collector output to indicate when the signal crosses the selected threshold. The output requires an external pull-up because the LM293 does not actively drive its output high. Designers should account for input offset voltage, common-mode limits, supply voltage, output pull-up resistance, and propagation delay. Input components should also prevent excessive differential input voltage and protect sensitive sensor nodes from electrostatic discharge. Because the output is open collector, the pull-up resistor and its placement materially affect rise time, power consumption, and susceptibility to interference. This page combines the LM293 family architecture, verified ordering and package information, practical replacement criteria, threshold-comparison guidance, and PCB-focused design considerations. It also distinguishes genuine pin-compatible choices from options that require changes to output pull-ups, supply arrangements, or board layout.

RFC Hubungi kami
LM293DT - Dual 36V Low-Power Comparator | STMicroelectronics
LM293DT

LM293DT - Dual 36V Low-Power Comparator | STMicroelectronics

STMicroelectronics LM293DT is a low-power dual voltage comparator containing two independent comparator channels in an 8-pin SOIC package. Each channel supports a single supply from 2 V to 36 V or dual-supply operation, while the input stage accepts input voltages spanning the supply rails. The device uses open-collector output stages suitable for driving wired-AND, open-drain, and pull-up-based interfaces. A voltage comparator is an analog integrated circuit that compares two input voltages and produces a logic-level output indicating which input is higher. The LM293 belongs to the comparator hierarchy, where a comparator is a signal-conditioning IC used between sensors, amplifiers, reference voltages, and digital control logic. Its two independent channels allow one package to perform two threshold decisions, reducing component count in industrial controls, monitoring equipment, and embedded systems. Key characteristics include very low supply current of 0.4 mA typical, 1 mW power consumption per comparator at a 5 V supply, low typical input bias current of 25 nA, and typical input offset current of ±5 nA. The typical input offset voltage is ±1 mV. Rail-to-rail input capability allows each comparator to operate with inputs near the negative and positive supply limits, while the open-collector outputs require an external pull-up resistor. The LM293DT uses a bipolar comparator architecture optimized for low power rather than high-speed operation. Its low input currents are useful when the source impedance is high or leakage would otherwise shift the comparison threshold. Because the outputs are open collector, two or more outputs can share a pull-up node to form a wired-AND function. The external pull-up determines output rise time, so resistance and capacitance must be selected together for the required switching speed. Typical applications include battery-powered threshold detection, sensor-signal conditioning, window comparators, overvoltage monitoring, industrial control interfaces, and simple switching regulators. The dual configuration is particularly useful when a system must monitor two independent limits or compare a measurement against both an upper and lower reference. For reliable PCB operation, place input and output bypass capacitors close to their associated pins and route comparator inputs away from switching nodes and high-current return paths. Account for input offset voltage and common-mode limits when defining detection thresholds. The open-collector outputs must always have a pull-up unless the output is intentionally left unconnected. This product page combines operating characteristics, application guidance, package information, and same-footprint replacement context to support faster component selection and board-level implementation.

RFC Hubungi kami
LM293H - Dual Differential Comparator | Texas Instruments
LM293H

LM293H - Dual Differential Comparator | Texas Instruments

The Texas Instruments LM293H is a dual differential comparator, an analog comparator IC with two independent comparison channels, open-collector outputs, and a TO-99-8 metal can package. The verified product data identifies the device as a general-purpose, low-power comparator with low offset voltage, operating from single or dual supplies over a wide voltage range. The LM293H is suitable when two signals must be compared and the result must drive TTL, MOS, CMOS, or other digital logic through its open-collector output. A differential comparator is a semiconductor device that compares two input voltages and produces a logic-level indication of their relationship. The dual-channel architecture provides two independent comparators in one package, reducing component count in threshold detection, overvoltage indication, current sensing, and control systems. Its open-collector outputs require an external pull-up resistor when the output must settle to a valid high level. The LM293 family is associated with wide supply capability, single-supply operation, and compatibility with common logic families. The LM293H is identified in the verified distributor data as an 8-pin TO-99-8 device with two channels. The manufacturer family information describes the LM293 as an industrial-grade dual differential comparator. The verified search data specifically lists low power, low offset voltage, rail-to-rail input labeling, open-collector output, and a wide supply operating range. Detailed electrical limits, propagation-delay curves, input common-mode limits, output sink-current limits, and temperature limits must be confirmed in the manufacturer datasheet before final design release. Typical uses include battery-powered monitoring, industrial sensor interfaces, overvoltage detection, temperature threshold circuits, and dual-rail control logic. In a practical design, each comparator can monitor a signal against a reference voltage while the open-collector output drives a pull-up and the downstream logic input. Care is required when inputs approach supply rails, when output pull-up speed affects timing, or when unused comparator channels are left unconnected. This page combines verified manufacturer and distributor links, package identification, application guidance, and structured comparison information. It intentionally avoids filling unavailable electrical values with guesses; consult the current manufacturer datasheet for authoritative limits, ordering details, and lifecycle information.

RFC Hubungi kami
LM293N - Dual Open-Collector Comparator, 8-DIP | STMicroelectronics
LM293N

LM293N - Dual Open-Collector Comparator, 8-DIP | STMicroelectronics

The STMicroelectronics LM293N is a dual, general-purpose voltage comparator with two independent channels, open-collector outputs, and an 8-DIP package. According to the STMicroelectronics LM293N product description, it is designed for single-supply operation across a wide voltage range, while operation from split power supplies is also possible. The verified distributor listing identifies the device as an 8-DIP comparator with open-collector/open-drain, rail-to-rail characteristics. Specific voltage, current, timing, temperature, and logic-threshold values were not included in the provided data and therefore require verification from the manufacturer datasheet before design release. A voltage comparator is an analog semiconductor that compares two input voltages and produces a logic-level indication of their relationship. The LM293N contains two independent comparators, allowing one package to implement threshold detection, window comparison, free-running oscillator, or simple analog-to-logic conversion. Within the broader hierarchy, it is a comparator IC, then an analog integrated circuit, and finally a semiconductor. Its open-collector outputs can sink external current and normally require a pull-up resistor when the design expects a high-level output. The primary documented feature is its ability to operate from a single supply over a wide range of voltages, with split-supply operation also supported. The two independent channels provide design flexibility for comparing a sensor against a reference, checking a power rail, or generating complementary decisions in control circuitry. The open-collector architecture can support wired logic and level translation, but the external pull-up, output current, propagation delay, and input common-mode limits must be checked against the actual datasheet. LM293N is suitable for industrial control, instrumentation, power-supply supervision, sensor interfaces, and embedded threshold detection. In a single-supply circuit, place the input network so that the signal remains within the device's verified common-mode range. In a split-supply circuit, confirm the positive and negative rail limits and the permitted total voltage. Because the provided data does not state absolute maximum ratings, supply voltage, input offset, output-current capability, response time, or operating temperature, those values should not be assumed. Design practice should include a local bypass capacitor, a defined pull-up resistor for each open-collector output, and protection for exposed sensor inputs. Avoid relying on an output high level until the pull-up network and downstream load have been analyzed. Verify input polarity, output inversion, hysteresis, and logic compatibility with the system controller. The 8-DIP package is mechanically important: use the manufacturer pinout and maintain adequate lead spacing during assembly. This page combines the verified LM293N product identity, package information, application context, datasheet links, and engineering considerations. It intentionally does not fabricate electrical ratings, pricing, lifecycle claims, or unreported pin names; obtain the current manufacturer datasheet and distributor quotation for production decisions.

RFC Hubungi kami
LM293P - Dual 36V Differential Comparator | Texas Instruments
LM293P

LM293P - Dual 36V Differential Comparator | Texas Instruments

Texas Instruments LM293P is a dual differential comparator rated for a 2 V to 36 V supply range, with a stated propagation delay of 300 ns, packaged as an 8-pin PDIP. Each channel provides independent differential inputs and an open-collector output, making the device suitable for threshold detection, level translation, relay driving, and industrial control logic. A differential comparator is an analog integrated circuit that compares two input voltages and changes its output state according to their relative polarity. The LM293 belongs to the comparator hierarchy, which sits within linear and mixed-signal ICs. Its open-collector outputs can sink current from a pull-up network, allowing the outputs to be wired together when wired-OR operation is required. The principal features of the LM293P are its dual-channel architecture, differential input arrangement, wide 2 V to 36 V operating supply range, open-collector outputs, and 300 ns response time. The package is an 8-pin PDIP, providing a through-hole footprint suitable for prototypes, legacy industrial equipment, repair assemblies, and applications where leaded components are preferred. The LM293 contains two electrically independent comparator channels. Differential inputs are presented through inverting and non-inverting pins, while the output uses an open-collector transistor capable of pulling the output node toward ground. A pull-up resistor is required to establish a high output level, and the output stage can sink current from TTL, CMOS, and other logic families within the device's stated operating limits. Typical uses include monitoring a control or battery voltage against a reference, detecting sensor crossings, implementing overvoltage and undervoltage protection, driving relay or indicator circuits, and providing threshold-compatible interfaces between analog and digital systems. Because the device supports a wide supply range, it can also be used in industrial systems operating from conventional low-voltage DC rails. Designers must provide the required output pull-up and verify input common-mode limits, output-current limits, and operating temperature against the manufacturer datasheet. Input protection, bypassing, and leaded-component spacing should also be considered when the LM293P is used in high-noise or high-voltage surroundings. This page combines verified manufacturer and distributor information with package-level selection guidance, verified drop-in candidates, application use cases, and practical design notes. It is intended to help engineers identify whether the LM293P fits an existing 8-pin comparator design without confusing electrically related but mechanically different packages.

RFC Hubungi kami
LM293QT - Dual Low-Power Wide-Supply Comparator | STMicroelectronics
LM293QT

LM293QT - Dual Low-Power Wide-Supply Comparator | STMicroelectronics

The STMicroelectronics LM293QT is a dual general-purpose comparator designed for low-power operation from a single supply or split supplies. The device provides two independent comparator channels, a wide single-supply operating range of 2 V to 36 V, and an open-collector output configuration. It is packaged in an 8-UFDFN package with a 2 mm x 2 mm body size. The LM293QT is suited to voltage-level detection, threshold comparison, industrial control logic, sensor interfaces, and low-current signal conditioning where a compact, low-power comparator is required. An analog comparator is an integrated circuit that evaluates two input voltages and changes its output state when the voltage at the non-inverting input becomes higher than the voltage at the inverting input. The LM293 family belongs to the comparator and linear IC hierarchy, where each independent channel compares its differential input while operating from a common supply. This makes the device useful between sensors and digital control systems, where a small voltage difference must be converted into a logic-compatible indication. The principal electrical characteristics include a 2 V to 36 V single-supply range, operation from split supplies of plus or minus 1 V to plus or minus 18 V, and very low supply current of approximately 0.45 mA. The comparator channels feature low input bias current of approximately 20 nA. The open-collector output stage allows the output to be pulled up to an external supply and enables wired-AND behavior when multiple comparator outputs are connected. The output type is suitable for interfacing with open-drain or open-collector digital devices. The LM293QT provides two independent channels in a compact 8-UFDFN package. The wide supply range allows operation from low-voltage systems through higher industrial rails, while the low supply current supports battery-operated and always-on equipment. The two channels can be used for independent threshold decisions, window monitoring, or complementary comparisons. Open-collector outputs require an external pull-up resistor when the output must rise to a defined logic-high voltage. Typical applications include industrial sensor interfaces, battery monitoring, power-supply sequencing, overvoltage and undervoltage detection, temperature-controller signal conditioning, and embedded threshold logic. Because the input common-mode range can include ground, the LM293QT is particularly useful in systems where the signal being monitored is close to the negative supply rail. When laying out a design, preserve the exposed-pad and package thermal requirements of the 8-UFDFN package. Route the comparator inputs away from switching nodes and high-current output paths, and place the input and output components close to their associated pins. Choose the external pull-up voltage and resistor to match the receiving logic, and verify that the output sink current remains within the device limits for the selected pull-up network.

RFC Hubungi kami
LM293ST - Dual 2V-36V Comparator | STMicroelectronics
LM293ST

LM293ST - Dual 2V-36V Comparator | STMicroelectronics

The STMicroelectronics LM293ST is a dual differential voltage comparator designed for low-voltage operation, with a 2 V to 36 V supply range and open-collector, open-drain outputs. The device contains two independent comparator channels in an 8-pin MiniSO surface-mount package, allowing both channels to operate from the same supply or from split power rails. A voltage comparator is an analog integrated circuit that compares two input voltages and produces a logic-level output indicating which input is higher. The LM293 family belongs to the comparator and amplifier IC category within the broader semiconductor hierarchy. Its open-collector outputs can sink current while remaining in a high-impedance state, making the device suitable for wired logic, pull-up resistor networks, relay drivers, and systems that require a flexible output drive configuration. The LM293ST provides two independent comparators, low offset, and high precision according to the STMicroelectronics LM293 family information. Its rail-to-rail input operation allows each differential input to approach the supply rails, which is useful when monitoring low-voltage sensor signals or battery-powered thresholds. The open-collector outputs also provide a deliberate isolation between the comparator output and the supply voltage, permitting external pull-up selection for a different logic family. Both channels can operate from a single 2 V to 36 V supply, and the device also supports split power-supply arrangements. The low-power architecture is intended for general-purpose threshold detection rather than high-speed signal conditioning. Because the outputs are open collector, designers must add pull-up resistors when a continuously driven high level is required. The output transistor provides current sinking capability, while the external pull-up establishes the high-state voltage and limits the available rise rate. Typical applications include industrial sensor thresholding, overvoltage and undervoltage detection, battery monitoring, window-comparator circuits, control-loop signaling, and digital interface adaptation. Two channels can also implement a hysteretic switching controller, an automatic window detector, or a pair of independent limit alarms. In each case, input and output implementation details should be checked against the operating voltage, common-mode range, load current, and logic requirements of the completed circuit. The principal design consideration is that an open-collector output is not a push-pull logic output. Select the pull-up resistor and logic voltage carefully, keep the pull-up current within the output sink-current rating, and place the device close enough to the protected signal path to minimize pickup of switching noise. The exposed package also requires attention to copper area and thermal conditions when either channel operates continuously at maximum load. This product page brings together the manufacturer family information, distributor listing attributes, package details, replacement guidance, and practical design considerations. It also distinguishes verified electrical attributes from parameters that require confirmation from the LM293 manufacturer datasheet, helping engineers plan a replacement or design-in without relying on package-code assumptions.

RFC Hubungi kami
LM321MF/NOPB - 1MHz, Single Op Amp, 3-32V, SOT-23-5 | TI
LM321MF/NOPB

LM321MF/NOPB - 1MHz, Single Op Amp, 3-32V, SOT-23-5 | TI

The Texas Instruments LM321MF/NOPB is a single-channel, low-power operational amplifier delivering 1 MHz unity-gain bandwidth and 0.4 V/us slew rate in a 5-pin SOT-23 (DBV) package. It operates from a single 3 V to 32 V supply (or dual +/-1.5 V to +/-16 V) and supports an input common-mode range that includes ground, enabling true single-supply operation. Housed in the industry-standard SOT-23-5 footprint, the LM321MF/NOPB combines economy with TI's LM321 bipolar architecture originally developed by National Semiconductor. An operational amplifier (op amp) is a high-gain DC-coupled electronic voltage amplifier with differential inputs and a single-ended output. Op amps belong to the amplifier IC family within integrated circuits, which also includes instrumentation amplifiers, comparators, and specialty audio/video amplifiers. The LM321MF/NOPB specifically is a general-purpose single op amp, meaning one amplifier channel per package; it sits in the hierarchy: op amp -> amplifier IC -> analog IC -> integrated circuit -> semiconductor. Key features include 1 MHz gain-bandwidth product, 0.4 V/us slew rate, low input offset voltage (typical 2 mV), input common-mode range that includes the negative rail, and large capacitive-load drive capability. The bipolar input stage with class-AB output provides robust performance across the wide 3 V to 32 V supply range. Internal ESD protection and thermal shutdown enhance field reliability. The LM321MF/NOPB uses a bipolar transistor input stage rather than CMOS or JFET, giving it inherently low noise voltage density but somewhat higher input bias current than modern CMOS alternatives. Its wide supply range allows direct connection to industrial 24 V rails, 12 V battery systems, or +/-15 V analog supplies, eliminating the need for additional level shifters. The 1 MHz bandwidth is sufficient for audio, sensor conditioning, and many active-filter topologies. Typical applications include transducer signal conditioning, low-frequency active filters, current sensing with high-side or low-side shunt, audio pre-amplifier stages, and general-purpose amplification in industrial controls. The SOT-23-5 footprint is ideal for space-constrained PCB designs such as handheld instruments and IoT sensor modules. When designing with the LM321MF/NOPB, verify input bias current (45 nA typical) is acceptable for high-impedance sensor interfaces. Place a 0.1 uF decoupling capacitor close to the VCC pin and ensure output capacitive loads stay within the datasheet's stability region to avoid oscillation. This page synthesizes distributor pricing, drop-in SOT-23-5 alternatives, and practical design notes not found in the manufacturer datasheet alone, giving engineers a faster path from datasheet to prototype.

RFC Hubungi kami
LM324AD - Quad 30V 1.2MHz Op Amp | Texas Instruments
LM324AD

LM324AD - Quad 30V 1.2MHz Op Amp | Texas Instruments

Texas Instruments LM324AD is a general-purpose quad operational amplifier containing four independent, internally frequency-compensated amplifiers. The device supports a 30 V maximum supply, operates at a gain-bandwidth product of 1.2 MHz, and has a 3 mV input offset voltage rating. It is supplied in a 14-pin SOIC package, enabling one component to provide four amplified channels in a compact surface-mount footprint. The LM324 family is designed for single-supply operation over a wide voltage range, while also supporting split-supply arrangements when the circuit requires a bipolar input or output range. An operational amplifier is an analog signal-processing IC that uses high-gain differential amplification to increase the voltage presented at its input. The LM324 belongs to the general-purpose amplifier segment of the larger voltage-feedback operational-amplifier hierarchy. Internally compensated amplifiers simplify closed-loop design because no external frequency-compensation components are required for ordinary gain configurations. Four independent amplifiers in one package reduce board area and component count in multi-channel sensor, filtering, buffering, and control circuits. The verified product information identifies four amplifier circuits, a 1.2 MHz gain-bandwidth product, a 3 mV offset-voltage rating, and operation from a supply as high as 30 V. The internal compensation supports stable operation in standard noninverting and inverting amplifier arrangements. Because the LM324AD is a general-purpose device, design engineers should treat it as a cost-conscious solution rather than a precision op amp with rail-to-rail outputs, low offset over temperature, or very low noise. Common uses include buffering sensor outputs, amplifying low-level control signals, active filtering, differential signal conditioning, and driving ADC input stages. The four independent channels can process separate analog signals or implement stages such as a two-stage filter or transimpedance-style front end. Single-supply operation is particularly useful in industrial controls, embedded instrumentation, educational electronics, and simple battery-powered systems where a negative rail is unavailable. When using the LM324AD, verify input and output common-mode limits, output-current capability, load impedance, and stability under the selected closed-loop gain before finalizing the design. Place input and output compensation or decoupling components close to the relevant pins, keep sensitive input routing away from switching nodes, and include adequate bypassing on the power supply. The 14-pin SOIC package also requires attention to thermal pad-free layout and copper continuity when operating at high ambient temperatures. This product page combines verified manufacturer and distributor information, lifecycle-oriented sourcing details, same-footprint alternatives, and practical design guidance. It adds a same-package comparison framework and implementation notes that are more useful for PCB and sourcing decisions than a distributor listing alone.

RFC Hubungi kami
LM324ADBR - 30V 1.2MHz Quad Op Amp | Texas Instruments
LM324ADBR

LM324ADBR - 30V 1.2MHz Quad Op Amp | Texas Instruments

The Texas Instruments LM324ADBR is a four-circuit general-purpose operational amplifier rated for a 30 V maximum supply, 1.2 MHz gain-bandwidth product, and 3 mV input offset voltage. The device is packaged in a 14-pin SSOP (DB) package and is intended for low-frequency signal conditioning, current-to-voltage conversion, and general amplifier applications operating from a single or dual supply. An operational amplifier is a high-gain differential amplifier whose closed-loop behavior is established primarily by external feedback components. The LM324A family combines four amplifiers in one package, placing it in the operational-amplifier hierarchy alongside instrumentation, buffer, and comparator circuits while remaining part of the broader analog and power-management semiconductor ecosystem. Its common-mode input range allows the device to operate from single-supply or split-supply systems. The LM324ADBR supports a 3 V to 32 V total supply range, has an approximately 1.2 MHz gain-bandwidth product, and specifies a maximum input offset voltage of 3 mV. The package operates from 0°C to 70°C, making the standard A-grade ordering option suitable for commercial and industrial equipment where extended-temperature operation is not required. Its four independent channels can implement non-inverting, inverting, summing, difference, and comparator functions. Each channel uses a bipolar transistor input stage and an internally compensated architecture. Internal compensation removes the need for an external frequency-compensation capacitor in ordinary closed-loop operation. The 65 dB common-mode rejection and 16 V output swing support precision conditioning of mid-level signals, while the 60 mA per-channel output-current capability provides useful drive for higher-impedance loads. Typical uses include sensor signal conditioning, low-side current measurement, audio preamplification, transducer interfaces, and general DC signal amplification. The quad configuration also allows a single package to implement a complete instrumentation channel, such as a two-op-amp differential stage plus two buffer or gain stages. The device is especially suitable where a supply voltage above 5 V is available but a rail-to-rail input or output is unnecessary. Designers should verify common-mode input and output swing against the actual signal range, provide adequate bypassing close to the supply pins, and account for input offset and bias currents in high-impedance measurements. A stable feedback network and adequate output-load capability are also important because the LM324A is optimized for general-purpose, low-frequency precision rather than high-speed or rail-to-rail performance. This product page combines the Texas Instruments ordering information, package and electrical characteristics, sourcing guidance, and practical design considerations into a focused engineering reference. It also identifies same-footprint family options and explains the trade-offs when comparing the LM324A with lower-cost or lower-performance amplifier implementations.

RFC Hubungi kami
LM324ADE4 - Quad 1.2MHz Op Amp | Texas Instruments | SOIC-14
LM324ADE4

LM324ADE4 - Quad 1.2MHz Op Amp | Texas Instruments | SOIC-14

Texas Instruments LM324ADE4 is a quad general-purpose operational amplifier with four independent, internally frequency-compensated amplifiers, 1.2 MHz gain-bandwidth product, and 0.5 V/µs slew rate in a 14-pin SOIC package. The device operates from a single supply or split supplies, with the listed operating range extending to ±16 V. An operational amplifier is an analog signal-conditioning IC that compares two input voltages and amplifies their difference through high open-loop gain. The LM324ADE4 belongs to the operational-amplifier hierarchy within amplifier ICs and analog semiconductors. Its four independent channels allow one package to provide feedback control, buffering, level shifting, summation, and general analog amplification without requiring four separate amplifier packages. The four amplifiers feature internally frequency compensation, allowing operation as stable unity-gain buffers without external compensation components. A 1.2 MHz gain-bandwidth product and 0.5 V/µs slew rate support audio-band and general-purpose closed-loop applications. The device also supports operation from a single positive supply as well as split bipolar supplies, making it useful in mixed industrial, instrumentation, control, and consumer circuits. The 14-SOIC package is pin-compatible with the established LM324 family arrangement, which simplifies repair, prototyping, and board reuse. Each amplifier has differential inputs, an output, and power connections, with the package distributing those functions across four channels. Because the amplifiers are independent rather than sharing internal output stages, each channel can be used for a separate signal path or left unused when its input and output are properly configured. Typical uses include sensor-signal conditioning, low-current motor and actuator drivers, audio preamplification, analog summing networks, threshold detection, and general instrumentation. The 1.2 MHz bandwidth is adequate for many audio and control signals, but designs requiring substantially higher bandwidth, lower offset voltage, faster settling, or lower noise should use a more specialized amplifier family. Design carefully around input common-mode range, output swing, input bias current, and the limits of each amplifier channel. Keep sensitive inputs away from noisy return paths, observe the recommended bypass capacitors at the supply pins, and avoid operating near the output saturation limits. The manufacturer datasheet should guide input/output protection, supply decoupling, unused-channel configuration, and maximum input and output voltage conditions. This product page combines the LM324ADE4 operating parameters, package details, practical application guidance, pin-focused design considerations, and qualified drop-in alternatives. It is intended to help engineers identify where this economical quad general-purpose amplifier fits and where a higher-performance or application-specific amplifier is more appropriate.

RFC Hubungi kami
LM324ADG - Quad Op-Amp 1MHz 0.6V/us SOIC-14 | onsemi
LM324ADG

LM324ADG - Quad Op-Amp 1MHz 0.6V/us SOIC-14 | onsemi

The onsemi LM324ADG is a low-cost, single-supply quad operational amplifier with four independent, high-gain, internally frequency-compensated amplifiers in a 14-pin SOIC (3.90 mm width) package. It operates from a single 3 V to 32 V supply (or dual supplies of ±1.5 V to ±16 V), delivers a 1 MHz gain-bandwidth product and a 0.6 V/us slew rate, and draws quiescent current roughly one-fifth of that of comparable standard op amps. An operational amplifier is a high-gain voltage amplifier with differential inputs and a single-ended output, the foundational building block of the analog signal chain. Within the amplifier hierarchy, the LM324ADG belongs to the general-purpose, single-supply op-amp family, sitting above specialized precision, high-speed, and rail-to-rail amplifiers and below discrete transistor front ends in complexity. Quad op amps integrate four amplifiers on one die, sharing bias circuitry to save board space, cost, and power versus four single amplifiers. Key features include true differential inputs valid at ground (the common-mode input range extends to the negative rail, an LM324 family signature), a wide supply range from 3.0 V to 32 V that covers 5 V, 12 V, 15 V, and 24 V rails, four amplifiers per package for dense multi-channel analog designs, and internally compensated unity-gain stability that removes the need for external frequency-compensation capacitors. Architecturally, the LM324A uses bipolar NPN input stages with PNP common-emitter amplifiers and Class AB outputs. The 'A' grade tightens the input offset voltage specification to a 3 mV maximum. Because the output stage is not rail-to-rail, the output swings to within roughly 1.5 V of V+ at light load while reaching close to the negative rail - a characteristic engineers must budget for when using the full supply range. Typical applications include transducer signal conditioning, DC gain blocks, active filters, comparators with hysteresis, summing amplifiers, and multi-channel industrial sensor interfaces, where the single-supply ground-sensing input and four-amplifier density directly reduce component count. Design consideration: the common-mode input range stops about 1.5 V below the positive rail, so keep input signals at least that far from V+ to avoid phase inversion or distortion. This page adds value beyond the manufacturer datasheet by consolidating drop-in alternatives, parameter comparison tables, and practical design notes in one place for sourcing and design engineers.

RFC Hubungi kami
LM324ADR - Quad 30V 1.2MHz Op Amp | Texas Instruments (Tape & Reel)
LM324ADR

LM324ADR - Quad 30V 1.2MHz Op Amp | Texas Instruments (Tape & Reel)

Texas Instruments LM324ADR is a general-purpose quad operational amplifier containing four independent, internally frequency-compensated amplifiers. The device supports a 30 V maximum supply, operates at a gain-bandwidth product of 1.2 MHz, and has a 3 mV input offset voltage rating. It is supplied in a 14-pin SOIC package, enabling one component to provide four amplified channels in a compact surface-mount footprint. The LM324 family is designed for single-supply operation over a wide voltage range, while also supporting split-supply arrangements when the circuit requires a bipolar input or output range. An operational amplifier is an analog signal-processing IC that uses high-gain differential amplification to increase the voltage presented at its input. The LM324 belongs to the general-purpose amplifier segment of the larger voltage-feedback operational-amplifier hierarchy. Internally compensated amplifiers simplify closed-loop design because no external frequency-compensation components are required for ordinary gain configurations. Four independent amplifiers in one package reduce board area and component count in multi-channel sensor, filtering, buffering, and control circuits. The verified product information identifies four amplifier circuits, a 1.2 MHz gain-bandwidth product, a 3 mV offset-voltage rating, and operation from a supply as high as 30 V. The internal compensation supports stable operation in standard noninverting and inverting amplifier arrangements. Because the LM324ADR is a general-purpose device, design engineers should treat it as a cost-conscious solution rather than a precision op amp with rail-to-rail outputs, low offset over temperature, or very low noise. Common uses include buffering sensor outputs, amplifying low-level control signals, active filtering, differential signal conditioning, and driving ADC input stages. The four independent channels can process separate analog signals or implement stages such as a two-stage filter or transimpedance-style front end. Single-supply operation is particularly useful in industrial controls, embedded instrumentation, educational electronics, and simple battery-powered systems where a negative rail is unavailable. When using the LM324ADR, verify input and output common-mode limits, output-current capability, load impedance, and stability under the selected closed-loop gain before finalizing the design. Place input and output compensation or decoupling components close to the relevant pins, keep sensitive input routing away from switching nodes, and include adequate bypassing on the power supply. The 14-pin SOIC package also requires attention to thermal pad-free layout and copper continuity when operating at high ambient temperatures. This product page combines verified manufacturer and distributor information, lifecycle-oriented sourcing details, same-footprint alternatives, and practical design guidance. It adds a same-package comparison framework and implementation notes that are more useful for PCB and sourcing decisions than a distributor listing alone.

RFC Hubungi kami
LM324ADR2 - 3-32V Quad 1MHz Op Amp | onsemi
LM324ADR2

LM324ADR2 - 3-32V Quad 1MHz Op Amp | onsemi

The onsemi LM324ADR2 is a general-purpose, single-supply quad operational amplifier with four amplifier circuits, a 3 V to 32 V supply range, 1 MHz gain-bandwidth product, and a maximum input offset voltage of 3 mV, housed in a 14-pin SOIC package. The device supports true differential inputs and combines four amplifiers in one package, reducing board area in cost-sensitive analog signal-conditioning systems. An operational amplifier is an amplifier IC that uses high open-loop gain and negative feedback to amplify the difference between two input voltages. The quad configuration places four amplifiers in one device, making it widely used in general-purpose signal conditioning, sensor interfaces, filtering, and control systems. Within the electronics hierarchy, an operational amplifier is a linear amplifier IC and a building block for analog signal-processing circuits. Key characteristics include four amplifier sections, operation from 3 V to 32 V, a 1 MHz gain-bandwidth product, and a 3 mV maximum input offset voltage. The wide supply-voltage range allows the LM324ADR2 to operate from common low-voltage supplies as well as higher-voltage industrial rails. Its internal input-stage characteristics are designed for general-purpose applications rather than high-speed precision signal paths. The quad architecture consolidates four amplifiers into one 14-pin SOIC package. This can simplify PCB layouts and reduce component count in designs requiring several independent analog channels. Because all four sections share one package and supply connection, engineers must still consider common supply-current variation, thermal behavior, ground routing, and channel-to-channel performance when planning precision measurements. Typical uses include low-frequency sensor amplification, audio preamplification, DC signal conditioning, active filtering, voltage comparison, and industrial control interfaces. The 1 MHz gain-bandwidth product is appropriate for signals well below its upper bandwidth limit, while the 3-32 V operating range supports both compact low-voltage systems and higher-voltage industrial electronics. For reliable layout, route analog inputs and feedback connections away from switching-current paths, connect the ground reference properly, and place input and output bypass capacitors close to the device. Avoid using the LM324ADR2 where very low offset, very low bias current, rail-to-rail output swing, or high-speed closed-loop performance is required without first checking the full operating conditions. This page organizes the LM324ADR2 electrical characteristics, package information, drop-in candidates, application guidance, and design notes into a practical engineering reference for analog designers.

RFC Hubungi kami
LM324ADR2G - Quad Op Amp, 3-32V, 1MHz SOIC-14 | onsemi
LM324ADR2G

LM324ADR2G - Quad Op Amp, 3-32V, 1MHz SOIC-14 | onsemi

The onsemi LM324ADR2G is a low-cost quad operational amplifier with four independent general-purpose amplifier circuits, true differential inputs, a supply range of 3V to 32V single-supply (or ±1.5V to ±16V split supply), a 1 MHz gain-bandwidth product, and a 0.6 V/µs slew rate, housed in a 14-pin SOIC package supplied on tape and reel. A quad operational amplifier is an integrated circuit that packs four identical, frequency-compensated op amp stages onto a single silicon die, sharing one set of power pins. Within the amplifier hierarchy, it belongs to the general-purpose bipolar op amp family: operational amplifier -> linear amplifier IC -> analog signal conditioning IC. Quad op amps reduce board area, cut per-channel cost, and improve channel-to-channel thermal matching versus four single op amps. Key features include single-supply operation down to 3V with input common-mode range that includes ground - the defining trait that made the LM324 the industry-standard quad op amp. The A-grade suffix guarantees a maximum input offset voltage of 3 mV, tighter than the base LM324. Internally frequency compensation eliminates external compensation components, and the low supply current of approximately 700 µA per amplifier (typical for the family) suits battery-powered designs. Technically, the LM324ADR2G uses a mature bipolar process with PNP input stages that enable ground-sensing inputs. The output stage is a classic single-ended Class-AB emitter follower, which means it can sink only limited current near ground and exhibits output crossover behavior under light loads - a known characteristic designers must account for in precision or audio paths. Typical applications include transducer signal conditioning, DC gain blocks, active filters, comparators, voltage followers, and industrial sensor interfaces where single-supply, ground-referenced inputs simplify the power architecture. Design consideration: keep total supply voltage within 32V, and remember the output cannot swing rail-to-rail - headroom of roughly 1.5V to the positive rail is required at moderate loads. This page adds value beyond the manufacturer datasheet by synthesizing distributor pricing, verified drop-in alternatives, a parametric comparison table, and practical design notes in one place.

RFC Hubungi kami
LM324ADRE4 - Quad 1.2MHz Op Amp in 14-SOIC | Texas Instruments
LM324ADRE4

LM324ADRE4 - Quad 1.2MHz Op Amp in 14-SOIC | Texas Instruments

Texas Instruments LM324ADRE4 is a quadruple general-purpose operational amplifier with four independent amplifier channels, a 1.2 MHz gain-bandwidth product, and a 0.5 V/us slew rate. The device operates from ±1.5 V to ±16 V and is packaged in a 14-pin SOIC. An operational amplifier is an analog signal-conditioning semiconductor that amplifies the difference between its inverting and non-inverting inputs. The LM324 belongs to the general-purpose op-amp hierarchy, combining four amplifiers in one integrated circuit. This integration reduces board area and simplifies designs requiring multiple low-frequency signal channels, such as sensor conditioning, audio paths, data acquisition, and industrial control loops. Each channel supports single-supply or dual-supply operation. Key characteristics include a 1.2 MHz gain-bandwidth product, 0.5 V/us slew rate, and a supply-voltage range of ±1.5 V to ±16 V. The four-channel architecture makes the device useful for amplifier arrays, active filters, comparators, buffer stages, and transducer interfaces. The 14-pin SOIC is a standard surface-mount package suitable for conventional PCB assembly and rework. The LM324ADRE4 is designed for general-purpose applications where a wide bandwidth, adequate slew rate, and economical quad integration are more important than low offset voltage, rail-to-rail output, or high precision. Its 14-pin package provides one amplifier section per three-and-a-half pins, with the positive supply connected to pin 4 and the negative supply connected to pin 11 in the standard dual-supply configuration. Grounding the negative supply pin permits single-supply operation when the signal and output remain within the usable common-mode range. Typical uses include low-frequency audio amplification, sensor signal conditioning, active filter stages, voltage followers, comparators, and general instrumentation. In multi-stage designs, the four channels can implement cascaded gain, summing, difference, or buffering functions while reducing component count. Independent amplifier sections also allow unused channels to be configured conservatively rather than left floating. Layout should keep feedback resistors and input traces close to the device, maintain short return paths to the supply ground, and place input bypass capacitance near the supply pins. Check output-current and capacitive-load limits for the selected operating condition. Because the LM324 is a general-purpose amplifier rather than a precision or rail-to-rail part, verify input common-mode range, output swing, offset, and noise requirements against the actual signal. This page combines the manufacturer-family specifications with same-package alternatives, a parameter comparison, and practical PCB guidance. It is designed to support quick part selection while directing engineers to the manufacturer datasheet and pin-description table for final circuit qualification.

RFC Hubungi kami