Produk (44,000+)

MCP3461T-E/NC - 16-Bit 153.6 ksps ADC | Microchip
MCP3461T-E/NC

MCP3461T-E/NC - 16-Bit 153.6 ksps ADC | Microchip

The Microchip Technology MCP3461T-E/NC is a single-channel, 16-bit delta-sigma analog-to-digital converter with a maximum conversion rate of 153.6 ksps, a 3 V supply, and a 20-UQFN 3 x 3 mm package. It is designed for precision signal acquisition where low-noise conversion, compact implementation, and serial digital output are important. An ADC is an interface IC that converts an analog voltage into a digital value for processing by a microcontroller, DSP, FPGA, or data-acquisition system. The MCP3461 belongs to the delta-sigma ADC family, which uses continuous-time sampling and digital filtering to provide high resolution and noise performance. It sits within the broader analog-to-digital converter and data-acquisition semiconductor hierarchy. The principal device characteristics are 16-bit resolution, one analog input, operation from a 3 V supply, and conversion throughput up to 153.6 ksps. The low-noise architecture makes the converter appropriate for slow or medium-speed measurements where input signals must be resolved accurately. Its compact 20-UQFN package also supports space-constrained instrumentation and embedded control designs. The MCP3461 family supports single, differential, and multiplexed measurement arrangements depending on the selected device and system configuration. Digital communication through a serial interface allows conversion results to be transferred efficiently to a host processor. Because the MCP3461T-E/NC does not include the onboard voltage reference offered by the MCP3461R, the system must provide an appropriate external reference. Typical uses include industrial process measurement, precision instrumentation, sensor acquisition, laboratory equipment, and low-bandwidth communication receivers. In these systems, the ADC converts a conditioned sensor or control signal into a digital value while the delta-sigma filtering helps suppress out-of-band noise. Designers should pay particular attention to reference-voltage accuracy, analog input range, source impedance, sampling behavior, digital-interface timing, and decoupling. The 3 x 3 mm UQFN package also requires a land pattern capable of supporting its exposed thermal pad and adequate copper area for stable operation. This page combines the manufacturer product information, exact MPN attributes, package details, verified source links, drop-in family guidance, and practical design considerations to simplify component selection and board-level implementation.

RFC Hubungi kami
MCP3461T-E/ST - 16-Bit, 153.6 ksps ADC | Microchip
MCP3461T-E/ST

MCP3461T-E/ST - 16-Bit, 153.6 ksps ADC | Microchip

The Microchip Technology MCP3461T-E/ST is a 16-bit, single-channel, low-noise delta-sigma analog-to-digital converter with a maximum conversion rate of 153.6 ksps and an SPI interface, housed in a 20-pin TSSOP package. The converter operates from a 3 V supply and is designed for applications requiring precise digital measurement of low-bandwidth analog signals. A delta-sigma ADC is an analog-to-digital converter that uses continuous-time oversampling, noise shaping, and digital filtering to convert an analog input into a high-resolution digital result. Within the broader ADC hierarchy, the MCP3461T-E/ST belongs to the precision sigma-delta converter class and provides a compact interface for industrial instrumentation, sensor measurement, and embedded control systems. The key features of this device include 16-bit resolution, one analog input channel, a maximum sample rate of 153.6 ksps, low-noise operation, and a serial peripheral interface for communication with a host controller. Its single-channel architecture reduces board complexity when only one analog quantity must be measured, while the 20-pin TSSOP package supports compact surface-mount layouts. The MCP3461T-E/ST belongs to the MCP3461 family of low-noise delta-sigma ADCs. Its digital conversion process provides a straightforward alternative to high-speed flash converters in measurement systems that prioritize resolution and noise performance over instantaneous conversion latency. Configuration and result transfer through the SPI interface allow it to be paired with microcontrollers, DSPs, and other embedded controllers. Typical uses include precision temperature measurement, bridge or pressure sensor conditioning, industrial process monitoring, laboratory instrumentation, and low-frequency data-acquisition systems. For applications requiring several independent analog inputs, an external analog multiplexer may be used when switching accuracy and settling requirements permit. PCB design should prioritize a short, shielded analog input path, solid grounding, and placement of input and reference-network components close to the converter. Designers should also evaluate the digital interface timing, power-supply noise, and acquisition timing against the selected data rate before finalizing the signal chain. This product page combines the manufacturer’s converter specifications, packaging information, lifecycle guidance, and pin-compatible family options with practical guidance for sourcing, PCB implementation, and ADC selection. The result supports faster component evaluation while keeping the critical engineering trade-offs visible.

RFC Hubungi kami
MCP3462-E/ST - 16-Bit Dual 153.6kSPS ADC | Microchip
MCP3462-E/ST

MCP3462-E/ST - 16-Bit Dual 153.6kSPS ADC | Microchip

The Microchip Technology MCP3462-E/ST is a low-noise, 16-bit delta-sigma analog-to-digital converter with two differential or four single-ended input channels, a programmable conversion rate up to 153.6 kSPS, and a 20-pin TSSOP package. The converter operates from a 2.7 V to 3.6 V analog supply and a 1.8 V to 3.7 V digital supply. A delta-sigma ADC is a signal-processing category of analog-to-digital converter that continuously oversamples and digitally filters its input. Unlike a flash or successive-approximation ADC, the MCP3462 trades conversion latency for high resolution, low noise, and integrated signal conditioning. It belongs to the broader ADC > data converter > mixed-signal semiconductor hierarchy and is intended for precision measurement rather than high-speed waveform capture. Key features include 16-bit resolution, four single-ended or two differential inputs, and a maximum programmable data rate of 153.6 kSPS. Integrated resources include an internal oscillator, programmable gain amplifier, temperature sensor, and digital interface functions described by the manufacturer. The MCP3462 uses an external voltage reference, while the pin-compatible MCP3462R adds an onboard reference and is identified by Microchip as the preferred option for new designs. The MCP3462 combines a delta-sigma conversion core with programmable input gain and flexible data acquisition modes. Its internal oscillator reduces the need for an external clock source, while the temperature sensor supports system-level monitoring. The dual differential-input architecture allows common-mode rejection of paired sensors, and the four single-ended channels permit multiplexing for multi-sensor systems. The 2.7 V minimum analog supply supports low-voltage industrial instrumentation, although the analog and digital operating ranges must remain within their respective limits. Typical uses include industrial process measurement, battery and power-system monitoring, environmental sensing, portable instrumentation, and low-frequency precision data acquisition. The integrated temperature sensor can assist with board-level thermal monitoring, while the programmable gain amplifier supports inputs that vary substantially in amplitude. Because the device is a delta-sigma ADC, software or digital filtering and a settling-time budget must be considered when measuring rapidly changing signals. The principal design consideration is reference quality. The MCP3462 requires an external reference, and reference noise, layout distance, and input filtering directly influence conversion results. Place the analog inputs, external reference, and associated bypass components close to the converter, keep digital interfaces away from sensitive analog inputs, and follow the manufacturer’s recommended decoupling and grounding arrangement. This page combines manufacturer positioning, distributor availability, verified package and channel information, pin-compatible same-family alternatives, and practical selection guidance. It also distinguishes the externally referenced MCP3462 from the onboard-reference MCP3462R so engineers can choose the appropriate variant without treating every TSSOP ADC as an interchangeable replacement.

RFC Hubungi kami
MCP3462R-E/ST - 16-Bit 153.6kSPS Delta-Sigma ADC | Microchip
MCP3462R-E/ST

MCP3462R-E/ST - 16-Bit 153.6kSPS Delta-Sigma ADC | Microchip

The Microchip Technology MCP3462R-E/ST is a low-noise 16-bit delta-sigma analog-to-digital converter (ADC) with a programmable data rate up to 153.6 kSPS, four single-ended or two differential input channels, and an integrated voltage reference, packaged in a 20-lead TSSOP. The -E grade extends operation from -40 °C to +125 °C and the -ST suffix denotes the 20-lead TSSOP package. A delta-sigma ADC is a type of analog-to-digital converter that uses a sigma-delta modulator to shape quantization noise into the out-of-band region, where it is removed by a digital decimation filter. Within the broader hierarchy of data converter ICs -> analog-to-digital converter -> data acquisition building block -> semiconductor, this architecture is the standard choice for high-resolution, low-bandwidth measurement of slowly varying or slowly changing analog signals such as temperature, pressure, load-cell bridge outputs, and battery voltage. Key features of the MCP3462R include 16-bit resolution, a maximum 153.6 kSPS conversion rate, an internal 2.048 V-class voltage reference with an internal oscillator, a programmable gain amplifier (PGA), an integrated temperature sensor, and burnout sensor detection for open-circuit diagnostics. A typical SNR of 97.3 dB and flexible digital interface handling let the same part cover industrial process control, energy metering, and portable instrumentation. The analog supply operates from 2.7 V to 3.6 V while the digital supply accepts 1.8 V to 3.7 V, which lets the ADC interface directly to 1.8 V microcontrollers and 3.3 V logic without level translators. The serial interface supports SPI-compatible framing, and the integrated reference and oscillator remove the external precision reference and crystal normally required, reducing board area and total solution cost. Typical applications include precision temperature sensing with RTDs and thermocouples, load-cell and strain-gauge front ends, industrial data acquisition modules, battery-powered portable instrumentation, and energy metering where a low-noise 16-bit conversion with built-in diagnostics is needed. When designing with the MCP3462R-E/ST, keep analog and digital return currents separated and place the input RC filter close to the VIN pins. The internal reference and internal oscillator simplify the BOM, but for the lowest gain error across temperature the external reference option should be evaluated against the accuracy target of the end measurement. This page consolidates parametric detail, package and pin information, drop-in replacement candidates, application guidance, and practical design notes into one reference so that design, sourcing, and review teams can evaluate the MCP3462R-E/ST without piecing the data together from multiple listings.

RFC Hubungi kami
MCP3462RT-E/NC - 16-Bit 153.6 kSPS Delta-Sigma ADC | Microchip Technology
MCP3462RT-E/NC

MCP3462RT-E/NC - 16-Bit 153.6 kSPS Delta-Sigma ADC | Microchip Technology

The Microchip Technology MCP3462RT-E/NC is a low-noise, 16-bit delta-sigma analog-to-digital converter with a maximum programmable data rate of 153.6 kSPS, an integrated voltage reference, and a 20-pin UQFN 3 x 3 mm package. It supports two differential or four single-ended input channels, making it suitable for precision sensor acquisition, industrial measurement, and low-voltage analog signal conditioning. A delta-sigma ADC is a data-converter architecture that uses continuous-time sampling and digital noise shaping to achieve high resolution from low-cost, compact integrated circuits. The MCP3462RT-E/NC belongs to the broader data-converter IC hierarchy, combining a sigma-delta modulator, digital filter, reference, oscillator, and digital interface in one device. This integration reduces external component count and simplifies PCB design compared with a discrete precision-conversion chain. The converter provides 16-bit resolution, a programmable output data rate up to 153.6 kSPS, and operation from a 2.7 V to 3.6 V supply according to the manufacturer product information. Its integrated voltage reference, internal oscillator, temperature sensor, and burnout-sensor detection support self-contained measurement systems. The SPI interface provides a straightforward digital connection to microcontrollers, embedded controllers, and data-acquisition equipment. The internal reference and oscillator are useful when a compact, deterministic sensor board is required. The temperature sensor can support compensation or diagnostics, while burnout detection helps identify open or failed sensor loops. The delta-sigma architecture is especially effective for slow-to-medium-speed measurements where high resolution and low noise are more important than high-bandwidth conversion. Typical uses include pressure, temperature, current, and industrial process sensing, as well as portable instrumentation, test and measurement equipment, and embedded data acquisition. The 3.7 V maximum supply voltage requires careful rail design, and analog input common-mode and source impedance should be evaluated against the converter's input structure before precision measurements are attempted. This page combines manufacturer and distributor product information with package details, practical application guidance, and drop-in alternatives for engineers evaluating the MCP3462RT-E/NC.

RFC Hubungi kami
MCP3462T-E/NC - 16-Bit Dual-Channel ADC | Microchip
MCP3462T-E/NC

MCP3462T-E/NC - 16-Bit Dual-Channel ADC | Microchip

Microchip Technology MCP3462T-E/NC is a 16-bit, dual-channel delta-sigma analog-to-digital converter with a maximum programmable data rate of 153.6 kSPS, an SPI interface, an internal oscillator, an internal temperature sensor, and a 20-pin UQFN package measuring 3 x 3 mm. A delta-sigma ADC is a type of analog-to-digital converter that uses oversampling, digital filtering, and noise shaping to provide high-resolution conversion from low-bandwidth analog signals. Within the data-conversion hierarchy, the MCP3462 belongs to the ADC > delta-sigma ADC > data-converter IC > semiconductor category. It is intended for precision measurement systems that prioritize resolution and integrated conversion features rather than ultra-high-speed waveform capture. The MCP3462 provides four single-ended input channels or two differential input channels, allowing one converter to handle multiple measurement inputs. Its 16-bit nominal resolution supports detailed digital representation of analog measurements, while the programmable output data rate reaches 153.6 kSPS. The converter also includes an SPI interface for communication with a host controller, an internal oscillator for clock operation, and an internal temperature sensor for monitoring conditions near the device. Operationally, the MCP3462 combines a delta-sigma conversion stage with digital filtering and serial output. Digital filtering reduces out-of-band noise but can influence the usable bandwidth and conversion latency associated with the selected data rate. Designers should therefore select the conversion-rate setting according to both the required signal bandwidth and the timing behavior expected by the sampling system rather than treating the maximum rate as the operating target for every measurement. Typical uses include industrial process monitoring, precision sensor acquisition, battery and power-system measurement, laboratory instrumentation, environmental monitoring, and low-frequency data-acquisition systems. The combination of differential or multiplexed single-ended inputs, a 3 V supply indication, and a compact 3 x 3 mm package supports compact analog front ends where board area and measurement density matter. A key design consideration is analog layout. Keep input traces short, maintain a continuous ground reference, and place input filtering and bypass components close to their associated pins. Because delta-sigma ADCs depend on digital filtering and stable clocking, evaluate the interaction among acquisition bandwidth, output data rate, SPI clocking, reference stability, and firmware timing before finalizing the signal chain. This product page combines the converter's core electrical characteristics with package, application, selection, and design guidance. It also distinguishes the target device from the pin-compatible MCP3462R family option, whose onboard voltage reference is a meaningful engineering difference when designing new analog measurement boards.

RFC Hubungi kami
MCP3462T-E/ST - 16-Bit Dual Delta-Sigma ADC | Microchip
MCP3462T-E/ST

MCP3462T-E/ST - 16-Bit Dual Delta-Sigma ADC | Microchip

The Microchip Technology MCP3462T-E/ST is a 16-bit, dual-channel delta-sigma analog-to-digital converter with a maximum programmable data rate of 153.6 kSPS, housed in a 20-pin TSSOP package. It supports four single-ended or two differential input channels, provides a 3 V analog supply option, and operates from -40°C to +125°C. The device also incorporates an internal oscillator and temperature sensor for practical acquisition-system integration. A delta-sigma ADC is a category of data-conversion IC that uses continuous-time oversampling and digital filtering to convert an analog input into a high-resolution digital value. Its application hierarchy is ADC → data-converter IC → analog-to-digital converter → signal-chain semiconductor. Delta-sigma converters are especially useful when a system needs good resolution, flexible conversion rates, and digital filtering without requiring a very high-speed flash or successive-approximation converter. The MCP3462T-E/ST combines a 16-bit conversion format with four single-ended or two differential inputs in a single dual-converter arrangement. Differential operation helps reject common-mode noise when paired with suitable input circuitry, while single-ended operation supports simpler sensor and voltage-measurement channels. Its selectable data rate supports acquisition architectures that trade conversion speed for output filtering and noise performance. The serial interface includes SPI, allowing the ADC to communicate with a microcontroller, digital signal controller, or other embedded processor. The manufacturer datasheet describes a programmable data rate, internal oscillator, and integrated temperature sensor. These resources can simplify system design by reducing the number of external timing and sensing components needed for a compact measurement channel. Typical uses include industrial process monitoring, precision sensor acquisition, laboratory instrumentation, medical equipment, and embedded data loggers. The MCP3462T-E/ST is especially appropriate when two analog channels must be digitized with 16-bit resolution and 153.6 kSPS maximum throughput. Differential pairs can be used for bridge sensors or small-signal transducers where signal integrity is important. PCB implementation should follow the manufacturer pin-description table and recommended decoupling layout. Keep analog and digital return currents separated, place input and reference components close to their associated pins, and use a quiet ground strategy around the converter. The SPI traces should be length-matched where practical and kept away from high-current switching nodes to minimize conversion errors. This page consolidates the exact part identification, operating limits, package information, acquisition use cases, drop-in comparison options, and practical PCB guidance needed to evaluate MCP3462T-E/ST before schematic capture. For current commercial availability, use the Request a Quote form on this page and request the required production quantity and delivery schedule.

RFC Hubungi kami
MCP3464-E/ST - 16-Bit Quad-Channel Delta-Sigma ADC | Microchip
MCP3464-E/ST

MCP3464-E/ST - 16-Bit Quad-Channel Delta-Sigma ADC | Microchip

The Microchip Technology MCP3464-E/ST is a 16-bit quad-channel delta-sigma analog-to-digital converter (ADC) designed for 3 V supply operation, packaged in a 20-pin gull-wing TSSOP (ST) surface-mount package. A delta-sigma ADC is a type of analog-to-digital converter that uses a sigma-delta modulator and a digital decimation filter to convert an analog voltage into a high-resolution digital word. This architecture trades conversion speed for excellent noise performance and linearity, which makes it a favored member of the ADC family hierarchy: ADC -> delta-sigma ADC -> sigma-delta modulator -> high-resolution mixed-signal converter for low-bandwidth, high-precision measurement. Key features of this device include 16-bit resolution across four analog input channels, a differential-capable sigma-delta conversion core, a 3 V supply rail for low-voltage system compatibility, and an automotive temperature grade designation according to distributor listings. Because the converter operates as a delta-sigma type ADC, it suits slow-moving analog signals such as temperature, pressure, load-cell, and bridge-sensor outputs where integration averages out wideband noise. An important design note from Microchip is that the MCP3464R variant, which includes an onboard voltage reference, is the preferred pin-compatible option for new designs; the MCP3464 itself requires an external reference. Typical applications include industrial process-control instrumentation, medical monitoring equipment, automotive sensor acquisition, energy-metering subsystems, and precision data-acquisition modules where 16-bit resolution, low noise, and simple single-chip signal conditioning reduce the need for external analog front ends. When designing around the MCP3464-E/ST, verify the reference-voltage requirement against your system: an external low-noise reference and proper input filtering are mandatory because the converter has no internal voltage reference. Decouple the supply pin close to the device, keep analog and digital return currents separated, and confirm the full conversion timing against your host sampling rate before committing to a multiplexed channel schedule. This page consolidates distributor pricing, pin-compatible Microchip drop-in alternatives, and practical application and layout guidance that is not assembled from a single manufacturer datasheet, giving engineers a single decision-ready reference for this quad-channel 16-bit delta-sigma ADC.

RFC Hubungi kami
MCP3464R-E/ST - 16-Bit 153.6kSPS Delta-Sigma ADC | Microchip
MCP3464R-E/ST

MCP3464R-E/ST - 16-Bit 153.6kSPS Delta-Sigma ADC | Microchip

The Microchip Technology MCP3464R-E/ST is a low-noise, 16-bit delta-sigma analog-to-digital converter with a programmable data rate of up to 153.6 kSPS, four differential or eight single-ended inputs, an integrated voltage reference, and a 20-pin TSSOP package. It is designed for precision signal acquisition where resolution, flexible channel configuration, and a compact interface are important. A delta-sigma ADC is a voltage-to-digital converter that uses continuous-time oversampling and digital filtering to achieve high resolution from a relatively simple analog front end. Within the analog-to-digital converter hierarchy, the MCP3464R-E/ST provides 16-bit nominal resolution, supports multiple input configurations, and uses an SPI-compatible serial interface for communication with microcontrollers, DSPs, and data-acquisition systems. Key characteristics include a 16-bit conversion resolution, a maximum programmable data rate of 153.6 kSPS, four differential or eight single-ended channels, and an internal voltage reference. The converter is available in a 20-pin TSSOP package and is identified as an active product. Its integrated reference and multiplexing capability reduce the number of external components required in measurement systems. The MCP3464R family uses a delta-sigma conversion architecture to support low-noise measurement of slowly changing or low-bandwidth analog signals. Its eight-single-ended or four-differential channel arrangement allows designers to select single-ended sensing for multiple grounded sources or differential sensing for improved rejection of common-mode noise. The SPI interface provides a straightforward connection to embedded control systems. Typical applications include industrial process monitoring, environmental sensing, portable instrumentation, data acquisition modules, and precision measurement of transducers such as temperature, pressure, strain, and level sensors. Differential inputs are especially useful when the source is referenced to a local ground or when sensor wiring introduces noise and offset errors. When laying out the circuit, place input and reference components close to the converter and keep analog routing short and guarded against digital switching noise. Confirm the selected data rate, output word format, gain, and digital filter configuration in the manufacturer datasheet before programming the serial interface. This page combines manufacturer and distributor technical information, package-specific comparisons, practical design notes, and drop-in replacement guidance to support component selection and PCB implementation decisions.

RFC Hubungi kami
MCP3464RT-E/NC - 16-Bit 153.6kSPS ADC | Microchip Technology
MCP3464RT-E/NC

MCP3464RT-E/NC - 16-Bit 153.6kSPS ADC | Microchip Technology

The Microchip Technology MCP3464RT-E/NC is a low-noise, 16-bit delta-sigma analog-to-digital converter with eight single-ended or four differential inputs, a maximum data rate of 153.6 kSPS, and a 20-pin UQFN exposed-pad package measuring 3 x 3 mm. It operates from a 2.7 V to 3.6 V analog supply and a 1.8 V to 3.7 V digital supply. A delta-sigma ADC is an analog-to-digital converter category that uses oversampling, digital filtering, and noise shaping to achieve high resolution in low-bandwidth measurement systems. The MCP3464 belongs to the ADC > data converter > mixed-signal IC hierarchy, where its role is to convert accurately measured analog voltages into digital data for processing by a microcontroller, embedded controller, or industrial control system. The principal features include 16-bit resolution, a selectable maximum conversion rate of 153.6 kSPS, four differential or eight single-ended input channels, and an integrated voltage reference. The converter supports analog inputs from 2.7 V to 3.6 V and digital interfaces from 1.8 V to 3.7 V. Its operating temperature range extends from -40 C to +125 C, supporting industrial and temperature-sensitive measurement designs. The delta-sigma architecture is particularly suitable for precision acquisition rather than high-frequency waveform capture. Conversion latency, digital filter settling, and the selected output data rate determine how quickly a new result becomes available. The integrated reference and low-noise design reduce the number of external precision components required, while the serial interface supports compact embedded systems in which board area is constrained. Typical uses include industrial process monitoring, sensor-interface modules, portable measurement instruments, environmental data acquisition, medical instrumentation, and embedded condition-monitoring systems. Multiple analog inputs allow one converter to service several transducers, while differential operation can help reject common-mode noise when appropriately paired with sensor and reference arrangements. The exposed-pad package requires careful PCB layout for thermal and electrical performance. Place the required bypass capacitors close to their associated supply pins, connect the exposed pad to the appropriate ground plane, and route high-impedance inputs away from switching nodes and digital return currents. Follow the manufacturer datasheet for the exact pin assignments, recommended network, and exposed-pad land pattern. This product page combines the manufacturer’s device characteristics, verified distributor availability information, package details, application guidance, and qualified family alternatives. It also highlights the important engineering distinctions among the MCP3464 variants so designers can select a pin-compatible option without confusing package, reference, or temperature-code differences.

RFC Hubungi kami
MCP3464T-E/ST - 16-Bit 153.6kSPS 4-Channel ADC | Microchip
MCP3464T-E/ST

MCP3464T-E/ST - 16-Bit 153.6kSPS 4-Channel ADC | Microchip

The Microchip Technology MCP3464T-E/ST is a low-noise, 16-bit delta-sigma analog-to-digital converter with four differential or eight single-ended input channels and a maximum conversion rate of 153.6 kSPS, packaged in a 20-pin TSSOP. It is designed for precision measurement systems that need high resolution, flexible input configuration, and an SPI-compatible serial interface. A delta-sigma ADC is a voltage-to-digital converter category that uses oversampling, noise shaping, and digital filtering to obtain high effective resolution from a compact analog front end. Within the broader semiconductor hierarchy, the MCP3464 belongs to the ADC family, sits under data-converter ICs, and ultimately serves industrial measurement, instrumentation, and embedded-control applications. Its four-channel architecture supports simultaneous acquisition of multiple sensor outputs without requiring four separate converter packages. The MCP3464T-E/ST combines 16-bit nominal resolution with programmable conversion rates up to 153.6 kSPS. The manufacturer describes the device as a low-noise converter with four differential or eight single-ended inputs, providing flexibility for bridge sensors, voltage inputs, and mixed measurement systems. Its SPI interface supports integration with microcontrollers and digital signal controllers while keeping conversion data and configuration controls on a compact serial bus. The converter family includes related four-channel devices distinguished by integrated voltage-reference and packaging options. The manufacturer specifically identifies MCP3464R as the preferred pin-compatible choice for new designs because it includes an onboard voltage reference that is not present in MCP3464. This distinction is important when deciding whether the original MCP3464T-E/ST remains appropriate for a board under revision or whether a new design should adopt the referenced configuration. The MCP3464T-E/ST is appropriate for industrial process monitoring, precision sensor acquisition, laboratory instrumentation, and embedded data acquisition. Its nominal 16-bit resolution suits measurements requiring more detail than an 8-bit or 12-bit converter, while the 153.6 kSPS maximum rate permits faster sampling than many low-speed high-resolution converters. For a robust implementation, confirm the external reference requirements, analog input voltage range, digital interface levels, and selected output-data format against the manufacturer datasheet. The four-channel TSSOP footprint also requires a layout that separates sensitive analog inputs from SPI activity and provides suitable return paths for analog and digital return currents. This product page combines the manufacturer product description, distributor identification, and package-level comparison data with practical selection guidance. It also distinguishes the original MCP3464T-E/ST from pin-compatible family members that add an onboard reference, helping engineers evaluate PCB reuse without overlooking functional changes.

RFC Hubungi kami
MCP3465T-E/QM - 16-Bit Single-Channel Delta-Sigma ADC, 3V, UQFN-12 | Microchip Technology
MCP3465T-E/QM

MCP3465T-E/QM - 16-Bit Single-Channel Delta-Sigma ADC, 3V, UQFN-12 | Microchip Technology

The Microchip Technology MCP3465T-E/QM is a 16-bit, single-channel delta-sigma analog-to-digital converter (ADC) designed for precision measurement, supplied from a 3 V rail and offered in a compact 12-pin UQFN package. It combines a high-resolution conversion engine with integrated voltage-reference and input-channel conditioning in a surface-mount footprint of roughly 3 mm x 3 mm, making it suitable for space-constrained industrial, instrumentation and sensor-signal conditioning designs. An ADC is a data-conversion device that transforms a continuous analog voltage into a digital code for processing by a microcontroller, DSP or host controller. Within the product hierarchy, this part belongs to the delta-sigma ADC class, which uses oversampling and digital filtering to deliver high resolution and excellent noise performance from a low bandwidth. The MCP3465 sits in the broader category of data-converter ICs, inside integrated circuits, inside semiconductors, and ultimately inside the wider electronic-component supply chain. Key characteristics include 16-bit nominal resolution, a single analog input channel, a 3 V supply domain and a UQFN-12 surface-mount package. Because it uses a delta-sigma architecture, the converter trades conversion speed for noise rejection and linearity, which is exactly what thermocouple, bridge, ratiometric sensor and general slow-changing analog signal measurements need. The small package keeps the analog front end close to the sensor on the board. The internal conversion chain uses a sigma-delta modulator followed by digital decimation filtering, so the effective noise bandwidth is narrowed far below the modulator sample rate. This is why the device performs well when the input signal is slowly varying and when the analog board is electrically noisy. Differential-style ratiometric measurements cancel supply drift and reference-gain error, which matters when the excitation current comes from the same supply as the converter. Typical applications include industrial process monitoring, portable medical instrumentation, load-cell and pressure bridge front ends, battery-powered data loggers, and consumer or IoT sensor hubs that need more resolution than an internal MCU ADC can deliver at low cost. The device also suits laboratory and test equipment where traceable measurement performance is required in a compact board area. A key design consideration is that delta-sigma ADCs need a clean reference and stable layout. Place the decoupling capacitors close to the supply and reference pins, keep analog traces short and away from switching nodes, and treat the analog ground return as a separate, low-impedance path to the regulator. Because the digital filter has a settling time, read the data-ready signal before issuing the next conversion instead of polling at a fixed delay. This page consolidates package, ordering-code and sourcing detail for the MCP3465T-E/QM together with drop-in replacement options in the same UQFN-12 footprint, a parameter-by-parameter comparison, and practical layout and application guidance that engineers can apply directly to a new analog board.

RFC Hubungi kami
MCP3550-50E/MS - 22-Bit 12.5 SPS ADC | Microchip
MCP3550-50E/MS

MCP3550-50E/MS - 22-Bit 12.5 SPS ADC | Microchip

The Microchip MCP3550-50E/MS is a low-power, single-channel 22-bit delta-sigma analog-to-digital converter operating at 12.5 samples per second in an 8-pin MSOP package. It accepts fully differential analog inputs and provides a 4.5 V supply rating, making it suitable for precision sensor acquisition, industrial instrumentation, and process-control systems. A delta-sigma ADC is a voltage-to-digital converter that uses oversampling, noise shaping, and digital filtering to obtain high resolution from relatively slow, low-frequency measurements. Within the converter hierarchy, the MCP3550-50E/MS belongs to the sigma-delta ADC family and is optimized for sensor signals where low noise and compact analog circuitry are more important than high conversion speed. The 22-bit resolution provides substantially more code density than conventional lower-resolution SAR ADCs. Its single-channel architecture simplifies analog routing, while the fully differential input structure supports direct connection to bridge sensors and other balanced sources. The manufacturer identifies the device as a low-power, single-channel converter intended for pressure, temperature, humidity, and similar sensor measurements. The MCP3550-50E/MS uses an MSOP-8 surface-mount package and supports an operating temperature range of -40 °C to +125 °C. The manufacturer offers the device in MSOP and SOIC package options within the broader MCP3550/1/3 family. The MSOP configuration is useful where PCB area is constrained but a conventional through-hole-compatible industrial design is not required. At 12.5 samples per second, the converter is suited to slowly changing measurements such as resistive bridges, thermocouple interfaces, industrial pressure transducers, and environmental sensors. Its differential input can help reject common-mode disturbances when the source is balanced and the analog front end is designed accordingly. It is less suitable for waveform capture, motor-control feedback, or other signals requiring sampling rates above the kilohertz range. Circuit design should follow the manufacturer datasheet for input filtering, reference voltage, bypass capacitance, and digital-interface implementation. Because sigma-delta converters reject out-of-band noise through digital filtering, the input network should suppress interference near the conversion bandwidth without unnecessarily increasing noise in the measured signal band. This product overview combines the manufacturer specifications with practical guidance for sensor acquisition, package selection, replacement planning, and PCB implementation. It also highlights where pin-compatible family members differ in conversion rate and where a direct drop-in substitution must be selected against the complete electrical requirements of the original design.

RFC Hubungi kami
MCP3550-50E/SN - 22-Bit, 12.5 SPS Single-Channel ADC
MCP3550-50E/SN

MCP3550-50E/SN - 22-Bit, 12.5 SPS Single-Channel ADC

The Microchip MCP3550-50E/SN is a 22-bit, 12.5-samples-per-second, single-channel sigma-delta analog-to-digital converter with differential inputs in an 8-pin SOIC package. It is designed for precision measurement systems that require low output noise, automatic offset and gain calibration, and a compact serial interface. The converter supports operation from -40°C to +125°C, making it suitable for industrial, process-control, and sensor-measurement equipment. An ADC is a data-conversion IC that transforms an analog voltage into a digital number for processing, storage, or transmission. Sigma-delta ADCs belong to the data-converter and signal-processing hierarchy. They use oversampling, digital filtering, and noise shaping to obtain high resolution and excellent noise performance from relatively slow input signals. The MCP3550 uses a fully differential input architecture, allowing sensor signals to be measured with common-mode rejection and improved immunity to externally coupled noise. Key characteristics include 22-bit resolution, 12.5 SPS conversion performance, 2.5 μV RMS output noise, and effective resolution of 21.9 bits. Automatic internal offset and gain calibration helps reduce systematic error, while the differential inputs suit bridge sensors, current-shunt measurements, and other signals centered around a common reference voltage. The device is offered in the space-saving 8-pin SOIC package, with an 8-pin MSOP option also available in the MCP3550 family. The delta-sigma architecture prioritizes resolution and noise rather than high conversion speed. This makes the MCP3550 appropriate for slow-changing measurements such as temperature, pressure, load, flow, and chemical-sensor outputs. A digital filter removes out-of-band noise after sampling, so the input bandwidth should be constrained to avoid aliasing and to prevent high-frequency signals from affecting measurement accuracy. Its differential signal path also requires careful common-mode voltage and reference design. Typical applications include industrial pressure transmitters, load-cell and strain-gauge instrumentation, temperature measurement, battery or power-supply monitoring, laboratory data acquisition, and process-control equipment. Using a differential input arrangement helps preserve measurement integrity when the sensor output is small relative to the analog common-mode voltage. Systems requiring simultaneous acquisition of several channels can pair it with a multiplexer when the required sampling rate remains within the converter's 12.5 SPS capability. The principal design consideration is analog signal conditioning around the ADC. Input filtering, differential driver stability, reference decoupling, grounding, and digital trace isolation directly affect achievable resolution. Designers should also calculate the required output-data rate and digital-filter settling time before allocating acquisition slots in a multichannel system. The SOIC-8 package permits straightforward assembly but requires adequate copper and thermal consideration when used near the upper temperature limit. This product page combines the manufacturer specifications with practical interpretation of the MCP3550-50E/SN architecture, pinout availability, package constraints, selection guidance, and drop-in alternatives. It also identifies where a related converter changes output-noise, calibration, sampling-speed, or packaging characteristics, helping engineers choose a device that matches the actual measurement chain rather than relying on resolution alone.

RFC Hubungi kami
MCP3550-60E/SN - 22-Bit 15 SPS Delta-Sigma ADC | Microchip Technology
MCP3550-60E/SN

MCP3550-60E/SN - 22-Bit 15 SPS Delta-Sigma ADC | Microchip Technology

Microchip Technology MCP3550-60E/SN is a 22-bit, single-channel sigma-delta analog-to-digital converter with a 15 SPS conversion rate, 50/60 Hz rejection, and an 8-pin SOIC package. Designed for precision measurement rather than high-speed waveform acquisition, it converts low-bandwidth differential sensor signals into serial digital data for industrial control, process measurement, and precision instrumentation. A sigma-delta ADC is a type of analog-to-digital converter that uses oversampling and digital filtering to deliver high resolution with excellent noise performance at low conversion rates. In the broader semiconductor hierarchy, the MCP3550-60E/SN belongs to the ADC/DAC category and specifically serves as a low-power precision conversion IC for sensors and process-control signals. Its single-channel architecture reduces conversion complexity while its differential input supports measurement of small signals referenced to a common-mode voltage. Key features include 22-bit nominal resolution, a 15 SPS output rate, single-channel differential conversion, and 50/60 Hz rejection suited to rejecting power-line-related disturbance. The device operates from 2.7 V and supports an industrial temperature range of -40°C to +125°C. Its 8-pin SOIC package is available for compact analog measurement circuits requiring a conventional surface-mount footprint. The MCP3550/1/3 family uses a sigma-delta conversion architecture optimized for low-bandwidth, high-resolution measurement. The 15 SPS rate is appropriate for slowly changing quantities such as temperature, pressure, load-cell output, or chemical-sensor output. Differential analog inputs make the converter suitable for circuits that reject common-mode noise, while the 50/60 Hz rejection targets interference commonly encountered in industrial environments. Typical uses include precision temperature measurement, pressure and load-cell signal acquisition, industrial process control, battery and power-system monitoring, laboratory instrumentation, and low-rate sensor interfaces. The device is especially relevant when the measured signal changes slowly and high resolution is more valuable than rapid sampling. Systems requiring faster acquisition should choose an ADC explicitly designed for that throughput. Design around the converter's differential input architecture, supported supply range, and digital interface requirements. Provide appropriate input filtering and observe the manufacturer recommendations for bypass capacitors and signal-source settling. Keep sensitive analog traces short, isolate them from switching-node currents, and confirm acquisition timing before choosing oversampling or averaging settings. This product page combines the confirmed conversion specifications, package information, lifecycle status, drop-in family alternatives, practical PCB guidance, and a parameter-by-parameter comparison. It is designed to help engineers locate the datasheet, verify footprint compatibility, plan signal conditioning, and qualify the MCP3550-60E/SN for precision embedded measurement systems.

RFC Hubungi kami
MCP3551-E/MS - 22-Bit Low-Noise Delta-Sigma ADC | Microchip
MCP3551-E/MS

MCP3551-E/MS - 22-Bit Low-Noise Delta-Sigma ADC | Microchip

The Microchip Technology MCP3551-E/MS is a 22-bit, single-channel delta-sigma analog-to-digital converter with a fully differential input, an internal oscillator, and a conversion rate of 13.75 samples per second, housed in an 8-pin MSOP package. The converter supports supply operation from 2.7 V and is designed for applications requiring high accuracy, low noise, and low-power signal acquisition. Its output noise is specified as low as 2.5 uVRMS, while total unadjusted error is reported as 10 ppm. A delta-sigma ADC is a voltage regulator and signal-processing technique in which a continuously operating internal modulator oversamples the input before digital filtering and decimation. The MCP3551 belongs to the ADC, data-converter, and analog-signal-processing semiconductor hierarchy. Its low output rate and high nominal resolution favor measurements that change slowly, making it particularly useful for industrial process-control loops, bridge sensors, and precision analog instrumentation rather than high-bandwidth waveform capture. The principal benefits of the MCP3551-E/MS include 22-bit resolution, a fully differential analog input, low output noise, a 10 ppm total unadjusted error, and an internal oscillator that avoids an external clock source. The single input supports one analog measurement channel, while the delta-sigma architecture filters high-frequency content through oversampling and digital decimation. Its 2.7 V minimum supply voltage also permits use in compact, low-power measurement systems. The MCP3551 family combines a sigma-delta conversion stage with an internal oscillator and digital signal processing. The verified comparison data identifies the MCP3551 as a low-power, single-channel converter and lists a 2.7 V operating supply. Because the device uses a fully differential input, the source circuit must present two input nodes with the required common-mode voltage and differential range. The internal oscillator simplifies clocking but means system designers should account for converter timing when calculating effective update rates. Typical applications include industrial pressure and temperature measurement, process-control instrumentation, sensor-interface circuits, and low-frequency precision data acquisition. The fully differential input is particularly useful when the measured quantity originates from a bridge or another balanced source, because it supports rejection of common-mode disturbance when the circuit is designed and laid out correctly. The 13.75 SPS conversion rate is suitable for supervisory measurements rather than high-speed sampling. The primary design consideration is the analog front end. Differential input filtering, common-mode headroom, grounding, and source impedance must be evaluated together. Because exact input-voltage limits, gain settings, and recommended external component values are not present in the supplied verification data, those values should be taken directly from the Microchip datasheet and typical application circuit before layout is released. This product record combines verified manufacturer positioning, distributor identification, package information, pricing evidence, and cross-reference findings. It also distinguishes genuine same-package drop-in options from functionally similar converters that require a different footprint, helping engineers make a PCB-compatible sourcing decision without treating broad ADC equivalence as pin compatibility.

RFC Hubungi kami
MCP3551-E/SN - 22-Bit Low-Power Sigma-Delta ADC | Microchip
MCP3551-E/SN

MCP3551-E/SN - 22-Bit Low-Power Sigma-Delta ADC | Microchip

The Microchip Technology MCP3551-E/SN is a 22-bit, single-channel, low-power, sigma-delta analog-to-digital converter with fully differential analog inputs, an internal oscillator, and a serial interface for industrial and process-control measurements. The device operates from a 2.7 V to 5.5 V supply, provides output noise as low as 2.5 uVrms according to the supplied comparison data, and supports conversion rates described in distributor listings as low as 14 sps. It is packaged in an 8-pin SOIC, designated MCP3551-E/SN, and is specified for operation from -40 C to +125 C. A sigma-delta ADC is a voltage-regulator and signal-conversion category within the broader ADC and data-converter hierarchy. Its modulator and digital filter shape quantization noise away from the signal band, allowing high resolution and low noise without requiring a high-speed flash or successive-approximation converter. The MCP3551 family uses fully differential inputs, making it suitable for bridge sensors, sensor interfaces, and other measurement systems where common-mode noise and ground references must be controlled carefully. The MCP3551-E/SN is positioned for precision measurement rather than high-throughput sampling. Its 22-bit resolution, low-power operation, internal oscillator, and differential input architecture support compact industrial and process-control equipment. The listed 14 sps operating rate indicates that it is intended for slowly changing or low-bandwidth signals, such as temperature, pressure, load-cell, and chemical-sensor outputs, rather than waveform capture or fast closed-loop control. The device uses a serial interface and is identified in distributor listings as a one-channel ADC with SPI communication. The 8-pin SOIC package provides a small-footprint surface-mount option, while the -40 C to +125 C temperature range supports industrial equipment and extended-temperature environments. The automotive AEC-Q100 designation appears in the supplied Arrow listing, but the exact qualification scope and grade should be confirmed against the manufacturer documentation before automotive release. For new layouts, use the MCP3551-E/SN as the reference part and verify the differential input network, reference voltage, digital interface, and grounding strategy against the manufacturer datasheet. Because the supplied web data does not provide the complete pin-level definitions, input ranges, settling behavior, or calibration coefficients, those values require confirmation before final circuit sign-off. This product page consolidates the verified manufacturer and distributor information, price observations, package details, application guidance, and drop-in candidate analysis. It also clearly distinguishes verified facts from parameters that still require datasheet confirmation, helping engineers evaluate the MCP3551-E/SN without relying on unsupported assumptions.

RFC Hubungi kami
MCP3551T-E/MS - 22-Bit Delta-Sigma ADC | Microchip Technology
MCP3551T-E/MS

MCP3551T-E/MS - 22-Bit Delta-Sigma ADC | Microchip Technology

The Microchip Technology MCP3551T-E/MS is a single-channel, 22-bit delta-sigma analog-to-digital converter with a 14 samples-per-second output rate, a fully differential input architecture, and a read-only SPI-compatible interface. The converter is packaged in an 8-pin MSOP package for compact industrial and process-measurement designs. Its 2.7 V minimum operating voltage and -40 °C to +125 °C temperature range make it suitable for precision instrumentation operating from low-voltage industrial supplies. A delta-sigma ADC is a type of analog-to-digital converter that uses continuous-time delta-sigma modulation and digital filtering to convert an analog voltage into a high-resolution digital code. Within the data-converter hierarchy, the MCP3551T-E/MS is an ADC, a data-converter IC, and a semiconductor intended for precision signal acquisition. The architecture is especially useful when high resolution, low noise, and narrow-band measurement performance are more important than rapid conversion of rapidly changing signals. The MCP3551 family provides 22-bit resolution, a single analog input channel, and a fully differential input configuration. Differential input allows a sensor or measurement circuit to drive two related signals and helps reject common-mode disturbances. The 14 samples-per-second rate is suitable for slow industrial variables such as temperature, pressure, load, level, and chemical concentration. The read-only SPI-compatible interface supports deterministic digital communication while requiring the host controller to request and receive conversion data. Operation from 2.7 V supports integration with 3.3 V systems, while the extended -40 °C to +125 °C range covers industrial environments beyond typical commercial-temperature operation. The low-power, single-channel architecture avoids unnecessary conversion complexity when the required measurement bandwidth is low. Because the input is fully differential, application circuits should provide a suitable reference, sensor excitation, input filtering, and a defined common-mode range before the converter input. Typical applications include bridge-based pressure and load measurement, current-loop and voltage-loop instrumentation, battery-cell monitoring, laboratory sensor interfaces, and industrial process-control nodes. In these systems, the ADC commonly sits behind a low-noise analog front end, and the digital controller configures the converter through its serial interface before processing the resulting 22-bit code. For PCB implementation, place the analog input and reference components close to the device, keep digital clock and control traces away from sensitive analog inputs, and provide a clean ground return. Confirm the input common-mode voltage, reference voltage, filter requirements, and conversion timing against the manufacturer datasheet before finalizing the schematic. This product record combines the manufacturer’s device description with practical engineering guidance, including interface considerations, application fit, package constraints, and a parameter-by-parameter comparison framework. It is intended to help engineers qualify the converter for precision acquisition rather than merely identify the orderable part number.

RFC Hubungi kami
MCP3551T-E/SN 22-Bit Sigma-Delta ADC | Microchip Technology
MCP3551T-E/SN

MCP3551T-E/SN 22-Bit Sigma-Delta ADC | Microchip Technology

Microchip Technology MCP3551T-E/SN is a single-channel 22-bit delta-sigma analog-to-digital converter with a fully differential analog input and an SPI-compatible serial interface. The device is offered in an 8-pin SOIC package for industrial and process-control measurement systems where compact size, resolution, and low-noise conversion are important. The converter operates across the -40C to +125C temperature range and is designed for applications requiring accurate acquisition of low-frequency analog signals. A delta-sigma ADC is an analog-to-digital converter that uses continuous-time sampling, noise shaping, and digital filtering to provide high-resolution conversion from a limited-resolution internal converter. The MCP3551 family combines this technique with fully differential inputs, making it suitable for sensor interfaces, pressure measurement, bridge transducers, and other systems where rejecting common-mode noise is valuable. Its 22-bit nominal resolution supports high-precision measurement while maintaining a compact, low-pin-count footprint. The MCP3551T-E/SN provides an output noise figure listed as 2.5 uVRMS and an effective resolution of 21.9 bits. The product information also identifies automatic internal offset and gain calibration, which helps simplify signal-chain implementation and improve measurement consistency. The serial interface is identified as SPI compatible, allowing connection to a microcontroller or other digital controller for configuration and data transfer. Because the converter is intended for precision analog measurement, the analog input network, reference voltage, grounding, and digital layout deserve careful attention. Fully differential operation helps reject disturbances common to both inputs, while filtering and calibration influence the final noise performance. The compact 8-pin SOIC package also makes the device suitable for designs where board space is constrained but industrial temperature performance is required. Typical uses include industrial process control, sensor measurement, data acquisition, and precision instrumentation. When selecting the MCP3551T-E/SN, verify the input range, reference requirements, sampling behavior, calibration sequence, and SPI timing against the complete manufacturer datasheet. This page combines the manufacturer product information with distributor references and practical guidance for evaluating the converter in a new measurement design.

RFC Hubungi kami
MCP3553-E/MS - 22-Bit 60 SPS Sigma-Delta ADC | Microchip
MCP3553-E/MS

MCP3553-E/MS - 22-Bit 60 SPS Sigma-Delta ADC | Microchip

The Microchip Technology MCP3553-E/MS is a low-power, single-channel 22-bit delta-sigma analog-to-digital converter with a 60 samples-per-second conversion rate, SPI interface, and 8-pin MSOP package. It is designed for precision measurement systems that require high resolution and relatively slow conversion rates, including industrial process monitoring, sensor instrumentation, laboratory measurement, and low-bandwidth data acquisition. According to the Microchip MCP3553 product page, the device is in production and is described as a 22-bit, 60 SPS, single-channel ADC. A delta-sigma ADC converts an analog input by using an internal modulator, digital filter, and decimator to oversample and average the input signal. This architecture provides high resolution and good noise performance without requiring a high-speed flash converter, making it well suited to temperature, pressure, load-cell, and resistive bridge measurements. The MCP3553-E/MS also includes automatic internal offset and gain calibration features identified in the device data listing, helping reduce offset and gain errors in precision measurements. The MCP3553-E/MS operates from a 2.7 V supply, as identified in the FindIC specification listing, and provides a differential or single-ended analog input architecture suitable for low-level sensor signals. Its SPI serial interface supports connection to microcontrollers, DSPs, and other digital controllers while keeping the eight-pin package compact. The 22-bit resolution provides a nominal 4.19 million code counts, although practical measurement resolution depends on the analog front end, reference source, reference gain, conversion rate, noise, and calibration configuration. Typical applications include industrial process-control loops, precision instrumentation, environmental monitoring, pressure sensing, temperature measurement, and embedded data loggers. Because the converter is optimized for low-noise, high-resolution measurement rather than high-speed waveform capture, it is best used when the input signal changes slowly relative to the 60 SPS conversion rate. For PCB implementation, place the analog input, reference, and ground connections carefully because high-resolution measurement performance is sensitive to noise coupled into the analog input. The SPI clock and digital control traces should be kept away from the analog input and reference pins. The manufacturer product page and data sheet should be consulted for the recommended application circuit, bypass capacitor values, grounding arrangement, and calibration sequence before releasing a production design. This page combines manufacturer status information, distributor specifications, pricing, and practical engineering guidance with the information gain that is often absent from basic catalog listings: the relationship between conversion rate, delta-sigma filtering, calibration, layout sensitivity, and the application constraints that determine whether the MCP3553-E/MS is the correct ADC for a given measurement chain.

RFC Hubungi kami
MCP3553-E/SN - 22-Bit 60 SPS ADC | Microchip Technology
MCP3553-E/SN

MCP3553-E/SN - 22-Bit 60 SPS ADC | Microchip Technology

Microchip Technology MCP3553-E/SN is a 22-bit, single-channel delta-sigma analog-to-digital converter operating at 60 samples per second and housed in an 8-pin SOIC package. It is designed for low-power measurement systems that require high nominal resolution and a slow conversion rate. The automotive-qualified MCP3553-E/SN is identified by Microchip as an AEC-Q100 device. An ADC is an integrated circuit that converts an analog voltage into a digital number for processing, measurement, logging, or control. Delta-sigma ADCs belong to the data-converter IC category and use oversampling, digital filtering, and noise shaping to convert the input voltage. This architecture is especially useful for relatively slow sensors because it can offer fine resolution while integrating noise over the conversion interval. The MCP3553-E/SN provides 22-bit nominal resolution, one analog input, one sigma-delta conversion channel, and a conversion rate of 60 samples per second. Its low-power design is suitable for battery-operated instrumentation, portable measurement equipment, and industrial sensor interfaces. The manufacturer also identifies automatic internal offset and gain calibration as a feature of the MCP3553 family. The converter is intended for applications in which signal bandwidth is limited and conversion speed is less important than resolution. Its 60 SPS rate suits many temperature, pressure, load-cell, and slowly changing process-control signals. The 8-pin SOIC package is a surface-mount package that supports conventional PCB assembly and compact board layouts. Typical uses include industrial process measurement, portable environmental monitoring, laboratory data acquisition, and automotive sensing systems. For an automotive design, confirm the exact qualification, temperature, and production requirements against the manufacturer datasheet. For non-automotive designs, the suffix and qualification still identify the same electrical converter family, so the complete ordering code should be checked before qualification. Layout should keep the analog input trace short and route it away from digital switching nodes. Follow the manufacturer’s input-capacitance and grounding recommendations, provide a clean reference connection, and evaluate input filtering against the 60 SPS conversion rate. Calibrated performance also depends on stable excitation and reference conditions. This product page combines the manufacturer’s device identity, package information, conversion characteristics, qualification status, sourcing links, and application guidance. It also distinguishes the verified operating facts from engineering details that still require design-specific validation.

RFC Hubungi kami
MCP3553T-E/SN - 22-Bit 60 SPS Sigma-Delta ADC | Microchip
MCP3553T-E/SN

MCP3553T-E/SN - 22-Bit 60 SPS Sigma-Delta ADC | Microchip

Microchip Technology MCP3553T-E/SN is a low-power, single-channel 22-bit delta-sigma analog-to-digital converter with a 60 samples-per-second conversion rate, SPI serial interface, and 8-pin SOIC package. It is designed for precision measurement systems that require high resolution, low output noise, and compact analog front ends. A delta-sigma ADC is a voltage-to-digital converter that uses oversampling and digital filtering to convert an analog input into a high-resolution digital code. Within the broader hierarchy, the MCP3553T-E/SN is a sigma-delta ADC, a precision data-converter IC, and a member of the power-management and analog semiconductor category. Its differential input architecture supports sensor, bridge, and low-level voltage measurements. Key characteristics include 22-bit resolution, 60 SPS throughput, 2.5 µVRMS output noise, and 21.9-bit effective resolution. The device also provides automatic internal offset and gain calibration, which helps reduce errors in low-level sensor measurements. Its SPI-compatible serial interface keeps the connection to a microcontroller compact while supporting deterministic data transfer. The MCP3553 family uses a sigma-delta conversion architecture that trades conversion speed for resolution and noise performance. The 60 SPS rate is suitable for slow-changing measurements such as temperature, pressure, load, and strain, where the priority is repeatable readings rather than high-speed waveform capture. Digital filtering further reduces high-frequency noise at the cost of a defined conversion and settling interval. Typical applications include industrial process monitoring, portable instrumentation, precision weigh systems, battery-powered measurement nodes, and sensor interfaces where analog signals remain close to the converter's internal noise floor. The fully differential input arrangement helps reject common-mode noise when the source is connected differentially. Designers should place input filtering and reference components close to the device, keep the analog input path compact, and allow the digital interface to remain isolated from sensitive analog traces. Stable supply and reference voltages are essential because supply and reference variation appear directly as measurement error even when the converter itself performs correctly. This page combines the manufacturer family information with package, interface, resolution, throughput, noise, and application guidance. It also identifies same-package family alternatives, explains their functional differences, and provides engineering notes for PCB layout, calibration, and analog signal conditioning that engineers can apply before schematic release.

RFC Hubungi kami
MCP3561-E/ST - 24-Bit 153.6kSPS ADC | Microchip
MCP3561-E/ST

MCP3561-E/ST - 24-Bit 153.6kSPS ADC | Microchip

The Microchip Technology MCP3561-E/ST is a 24-bit, single-channel delta-sigma analog-to-digital converter with a programmable data rate up to 153.6 kSPS, offered in a 20-pin TSSOP package. It supports two single-ended input channels or one differential input channel and operates from a 3 V supply. A delta-sigma ADC is a type of analog-to-digital converter that uses a sigma-delta modulator and digital decimation filtering to convert an analog input into a high-resolution digital result. The MCP3561 belongs to the ADC/DAC category within the broader semiconductor and signal-conversion hierarchy, making it suitable for precision measurement systems where moderate conversion speed and high resolution are more important than very high sample rates. The principal features established by the verified manufacturer and distributor data are 24-bit resolution, a maximum output rate of 153.6 kSPS, programmable conversion timing, single-ended or differential input capability, and operation from a 3 V supply. The single-ended architecture allows two inputs to be selected, while differential operation supports a one-channel arrangement for rejecting common-mode noise when the source can provide a complementary signal. The MCP3561 uses delta-sigma conversion to balance fine resolution with integrated digital filtering. Its maximum 153.6 kSPS rate makes it faster than many conventional low-resolution sigma-delta converters while retaining a 24-bit output format. However, the exact input bandwidth, effective noise performance, conversion-time table, common-mode range, and acquisition timing must be confirmed in the manufacturer datasheet before final analog-front-end and sampling-system design. Typical applications include precision process-control instrumentation, industrial sensor acquisition, portable measurement equipment, low-frequency data acquisition, and embedded measurement systems. The MCP3561R family is especially relevant because the manufacturer identifies MCP3561R as pin compatible and recommends it for new designs when its integrated voltage reference is acceptable. Designers should use the manufacturer's specified analog input network, reference arrangement, bypass-capacitor values, grounding method, and digital-interface timing. Because the MCP3561 does not include the onboard reference offered by MCP3561R, an external reference implementation must account for reference noise, drift, input impedance, and adequate decoupling. This page consolidates verified manufacturer positioning, distributor availability, package information, and conversion specifications with practical replacement guidance. It also distinguishes the confirmed pin-compatible MCP3561R from unverified alternatives so engineers can make an evidence-based decision without treating a similar ADC as a guaranteed drop-in replacement.

RFC Hubungi kami
MCP3561R-E/ST - 24-Bit Low-Noise Delta-Sigma ADC | Microchip
MCP3561R-E/ST

MCP3561R-E/ST - 24-Bit Low-Noise Delta-Sigma ADC | Microchip

The Microchip Technology MCP3561R-E/ST is a low-noise 24-bit delta-sigma analog-to-digital converter with two single-ended or one differential input channel, programmable data rates up to 153.6 kSPS, and an SPI interface. It is housed in a 20-pin TSSOP package and integrates an internal voltage reference, internal oscillator, temperature sensor, and burnout-sensor detection. A delta-sigma ADC is a type of sigma-delta analog-to-digital converter that uses oversampling, digital filtering, and noise shaping to convert an analog input into a high-resolution digital value. Delta-sigma ADCs belong to the data-converter and signal-acquisition IC categories and are widely used when high resolution, low noise, and good rejection of low-frequency disturbances are more important than very high conversion rates. The MCP3561R-E/ST provides 24-bit resolution, selectable input configurations for two single-ended channels or one differential channel, and a maximum programmable data rate of 153.6 kSPS. Its integrated voltage reference and oscillator reduce the number of external components required for standalone measurement systems. Burnout-current detection provides a way to identify open or failed sensor connections, while the integrated temperature sensor supports temperature-related diagnostics. The device uses the SPI serial interface for digital communication. Differential operation reduces sensitivity to common-mode voltage and helps improve rejection of external interference when the sensor output is referenced to a defined return path. Single-ended operation provides flexibility for systems that must measure two independent sensor voltages. The internal reference, oscillator, and conversion features help minimize board area and system cost. Typical uses include industrial sensor acquisition, pressure and temperature monitoring, process-control instrumentation, portable measurement systems, and low-noise analog front ends. For battery-powered equipment, the integrated reference and oscillator can simplify power-supply design, although operating mode and data rate still determine average current consumption. Differential wiring is generally preferable when the sensor can provide a complementary output. PCB design should keep the analog input, reference, and ground paths short, while placing decoupling capacitors close to the supply and ground pins. Route SPI signals away from sensitive analog inputs and use a quiet, low-impedance ground reference. Confirm the required conversion latency, output data rate, input range, and calibration approach before fixing the system sample rate. This page combines manufacturer specifications, application guidance, package details, and drop-in replacement analysis to support component selection and PCB replacement decisions. The alternatives listed share the intended 20-pin TSSOP footprint, while final design-in decisions should confirm electrical limits, pin functions, qualification status, and timing against the latest manufacturer documentation.

RFC Hubungi kami