MCP3550-50E/SN - 22-Bit, 12.5 SPS Single-Channel ADC
MPN: MCP3550-50E/SN ✓ AktifMCP3550-50E/SN Ringkasan
An ADC is a data-conversion IC that transforms an analog voltage into a digital number for processing, storage, or transmission. Sigma-delta ADCs belong to the data-converter and signal-processing hierarchy. They use oversampling, digital filtering, and noise shaping to obtain high resolution and excellent noise performance from relatively slow input signals. The MCP3550 uses a fully differential input architecture, allowing sensor signals to be measured with common-mode rejection and improved immunity to externally coupled noise.
Key characteristics include 22-bit resolution, 12.5 SPS conversion performance, 2.5 μV RMS output noise, and effective resolution of 21.9 bits. Automatic internal offset and gain calibration helps reduce systematic error, while the differential inputs suit bridge sensors, current-shunt measurements, and other signals centered around a common reference voltage. The device is offered in the space-saving 8-pin SOIC package, with an 8-pin MSOP option also available in the MCP3550 family.
The delta-sigma architecture prioritizes resolution and noise rather than high conversion speed. This makes the MCP3550 appropriate for slow-changing measurements such as temperature, pressure, load, flow, and chemical-sensor outputs. A digital filter removes out-of-band noise after sampling, so the input bandwidth should be constrained to avoid aliasing and to prevent high-frequency signals from affecting measurement accuracy. Its differential signal path also requires careful common-mode voltage and reference design.
Typical applications include industrial pressure transmitters, load-cell and strain-gauge instrumentation, temperature measurement, battery or power-supply monitoring, laboratory data acquisition, and process-control equipment. Using a differential input arrangement helps preserve measurement integrity when the sensor output is small relative to the analog common-mode voltage. Systems requiring simultaneous acquisition of several channels can pair it with a multiplexer when the required sampling rate remains within the converter's 12.5 SPS capability.
The principal design consideration is analog signal conditioning around the ADC. Input filtering, differential driver stability, reference decoupling, grounding, and digital trace isolation directly affect achievable resolution. Designers should also calculate the required output-data rate and digital-filter settling time before allocating acquisition slots in a multichannel system. The SOIC-8 package permits straightforward assembly but requires adequate copper and thermal consideration when used near the upper temperature limit.
This product page combines the manufacturer specifications with practical interpretation of the MCP3550-50E/SN architecture, pinout availability, package constraints, selection guidance, and drop-in alternatives. It also identifies where a related converter changes output-noise, calibration, sampling-speed, or packaging characteristics, helping engineers choose a device that matches the actual measurement chain rather than relying on resolution alone.
Pilihan pengganti yang segera untuk MCP3550-50E/SN — sama paket, pin-pin kompatibel. Bahagian paket yang berbeza memerlukan kerja ulang PCB diasingkan.
MCP3551T-E/SN
✅ Masuk Drop-InHubungi untuk harga
Lihat Datasheet →MCP3550-50E/SNVAO
✅ Masuk Drop-In📋 Alternatif rujukan (tidak dalam katalog)
MCP3551-50E/SN
✅ Masuk Drop-In ⚠️ Spesifikasi Tidak Disahkan📋 Alternatif rujukan (tidak dalam katalog)
MCP3550-50E/SN Penilaian maksimum & Ciri-ciri Elektrik
| Pemecahkatan | 22 bit |
| Effective Resolution | 21.9 bit |
| Conversion Rate | 12.5 SPS |
| Number of Channels | 1 channel |
| Architecture | 1 sigma-delta |
| Input Type | Fully differential analog input |
| Bising Output | 2.5 μV RMS |
| Offset and Gain Calibration | Automatic internal calibration |
| Digital Interface | SPI |
| Tegangan Pemberi Arus | 4.5 V |
| Gambaran Suhu Operasi | -40°C to +125°C |
| Kemasan | 8-pin SOIC |
| Jenis Pemasangan | Surface mount |
| Family Package Options | 8-pin MSOP and 8-pin SOIC |
| Status RoHS | Compliant |
| Status Lingkungan Hidup | In production |
Panduan Konfigurasi Pin MCP3550-50E/SN 8-pin msop and 8-pin soic
Konfigurasi pin untuk MCP3550-50E/SN (8-pin msop and 8-pin soic pakai). Komponen analog ini mempunyai pin masukan, keluaran, dan kuasa. Rujuk dokumen pengeluar untuk konfigurasi pengecualian, pemulihan, dan pin aktifkan. Ideal untuk pengawasan isyarat dan litar pengukur.
Tiada data garisan pin yang diperoleh untuk MCP3550-50E/SN.
Rujuk kepada lembaran data untuk konfigurasi pin penuh.
Aplikasi Biasa
MCP3550-50E/SN patut untuk 6 aplikasis: Industrial Pressure Transmitters, Load-Cell and Strain-Gauge Measurement, Temperature and Thermistor Acquisition, Battery and Power-Supply Monitoring, Laboratory Data Acquisition, Process-Control and Chemical Sensors.
Industrial Pressure Transmitters
The MCP3550-50E/SN fits slow-changing pressure-sensor signals because its 22-bit resolution and 21.9-bit effective resolution preserve small changes in a narrow analog range. The fully differential input accepts a sensor centered around a common-mode voltage and rejects common-mode disturbance better than a single-ended arrangement. At 12.5 SPS, the converter suits temperature, pressure, and process-control measurements that change over seconds rather than waveforms. Designers should band-limit the input, decouple the 4.5 V supply, and verify the selected reference against the required input span.
Disebarkan
Load-Cell and Strain-Gauge Measurement
The MCP3550-50E/SN is suitable for bridge-based force and strain measurements where the useful signal is small and common-mode rejection is important. Its differential sigma-delta input architecture supports direct comparison of the bridge excitation with a reference network, while automatic internal offset and gain calibration helps control systematic conversion error. The 2.5 μV RMS noise specification makes the converter attractive for high-resolution front ends. A stable bridge excitation, low-noise reference, and carefully shielded analog routing remain essential for achieving useful field accuracy.
Disebarkan
Temperature and Thermistor Acquisition
The MCP3550-50E/SN can digitize thermistor or resistive temperature-sensor networks when high resolution is more important than rapid conversion. Its 22-bit nominal resolution and 12.5 SPS rate are well matched to thermal signals that vary slowly, allowing the digital filter to reject noise outside the measurement bandwidth. The differential input arrangement can help when the sensing element is connected to a reference network, while the -40°C to +125°C device rating supports industrial environmental requirements. Component tolerances, self-heating, and bridge or divider excitation drift should be included in the calibration budget.
Disebarkan
Battery and Power-Supply Monitoring
The MCP3550-50E/SN is appropriate for slow-changing battery, charger, or power-rail measurements where a differential input can monitor a scaled voltage relative to a stable reference. The 12.5 SPS conversion rate is adequate for supervisory and energy-management functions rather than transient waveform capture. Its 21.9-bit effective resolution can reveal small changes in a regulated rail, but the useful result also depends on reference stability, input-divider accuracy, and the analog filter's settling behavior. The converter's 4.5 V supply architecture must be reconciled with the monitored system voltage and grounding arrangement.
Disebarkan
Laboratory Data Acquisition
The MCP3550-50E/SN can serve as a precision front end in laboratory systems measuring slow sensor outputs, current-shunt voltages, or calibrated analog quantities. Its SPI interface allows a controller to retrieve digital results, while the 22-bit resolution and 2.5 μV RMS noise support measurements requiring more resolution than a conventional lower-cost ADC. The 12.5 SPS rate makes it most appropriate for temperature, force, pressure, and laboratory channels rather than audio-band or vibration waveforms. Firmware should account for digital-filter latency and discard results that have not reached a settled output condition.
Disebarkan
Process-Control and Chemical Sensors
The MCP3550-50E/SN suits electrochemical, conductivity, and chemical-sensor systems that produce slowly varying differential signals. The sigma-delta architecture provides high resolution and narrow-band filtering, while automatic offset and gain calibration helps compensate for device-level errors that are important in long-duration process measurements. Its -40°C to +125°C operating range supports demanding industrial environments. The analog front end should nevertheless include low-noise excitation, defined input bandwidth, reference compensation, and diagnostics to distinguish sensor drift from converter or system-level errors.
Disebarkan
Ringkasan Produk Disebarkan
Data referensi kejuruteraan untuk MCP3550-50E/SN — perbandingan, panduan rancangan, dan maklumat kesediaan
Panduan Pilihan
Perbandingan dengan Gantian
| Parametr | Produk Ini | MCP3551T-E/SN | MCP3550-50E/SNVAO | MCP3551-50E/SN |
|---|---|---|---|---|
| Brand | Microchip Technology | Microchip Technology | Microchip Technology | Microchip Technology |
| Package | 8-pin SOIC | 8-pin SOIC - same | 8-pin SOIC - same | 8-pin SOIC - same |
| Resolution | 22 bit | 22 bit | 22 bit | 22 bit |
| Digital Interface | SPI | SPI | SPI | SPI |
| Operating Temperature Range | -40°C to +125°C | -40°C to +125°C | -40°C to +125°C | -40°C to +125°C |
Penyeberangsung Jelas
- Documented precision at a 12.5 SPS conversion rate (vsMCP3551T-E/SN)
- Same MCP3550-50E electrical architecture and footprint (vsMCP3550-50E/SNVAO)
- Automatic offset and gain calibration in a precision single-channel ADC (vsMCP3551-50E/SN)
Catatan Desain
Route the differential input and reference signals close to the converter and away from SPI clock and switching-node traces. Use a continuous ground plane, minimize input-loop area, and place input and reference filtering capacitors at their associated pins. The fully differential architecture can reject common-mode noise, but it cannot recover performance lost through unequal routing, parasitic pickup, or reference ripple.
Limit the analog input bandwidth to the signal and digital-filter requirements. A sigma-delta ADC samples the input and rejects out-of-band noise digitally, but frequencies above the Nyquist rate can alias into the measurement band. Add only the analog filtering needed to prevent aliasing, then account for the converter's output settling behavior when scheduling successive channel conversions.
Decouple the 4.5 V supply locally with the capacitance and placement specified in the manufacturer datasheet. Keep the reference voltage quiet and verify its behavior over the full -40°C to +125°C range. Power-supply and reference fluctuations appear directly in the converted result, so a low-noise reference and short supply return path are as important as the nominal converter resolution.
Maklumat Kesediaan
RoHS compliance is stated for the MCP3550-50E/SN ordering code. Qualification and environmental-document status should be confirmed for the exact ordering code and intended application.