ATMEGA32L-8AI vs ATMEGA32L-8AC Pengandingan
Pengandingan Sisi Kiri Sisi Kanan Terperinci ATMEGA32L-8AI disebabkan oleh Microchip Technology dan ATMEGA32L-8AC disebabkan oleh Microchip Technology. Bandingkan spesifikasi utama, parameter elektrik, pakej, status kehidupan, harga, dan keupayaan untuk menentukan komponen terbaik untuk keperluan disenjaya anda.
Microchip Technology
ATMEGA32L-8AI - 8-bit AVR MCU 32KB Flash 8MHz | Microchip
ATMEGA32L-8AI ✓ AktifMicrochip Technology
ATMEGA32L-8AC - 8MHz 8-bit AVR MCU, 32KB Flash, 44-TQFP | Microchip
ATMEGA32L-8AC ✓ AktifPengandingan Spesifikasi
| Parametr | ATMEGA32L-8AI | ATMEGA32L-8AC |
|---|---|---|
| Merek | Microchip Technology | Microchip Technology |
| Kategori | Microcontrollers | Microcontrollers |
| Status Lingkungan Hidup | Aktif | Aktif |
| Architecture | AVR 8-bit RISC | — |
| Core | AVR | — |
| Program Memory | 32 KB Flash (in-system programmable) | — |
| SRAM | 2 KB | 2 KB |
| EEPROM | 1 KB | 1 KB |
| Maximum CPU Speed | 8 MHz | — |
| Operating Voltage | 2.7 V to 5.5 V | — |
| I/O Pins | 32 programmable I/O lines | — |
| ADC | 8-channel, 10-bit | 10-bit, 8 channels |
| Timers | Two 8-bit + One 16-bit | — |
| Communication | USART, SPI, I2C (TWI) | — |
| Watchdog Timer | Yes | — |
| On-chip Analog Comparator | Yes | — |
| Kemasan | 44-pin TQFP (10x10 mm) | 44-pin TQFP (10x10 mm) |
| Jenis Pemasangan | Surface Mount | Surface Mount |
| Suhu Operasi | -40C to +85C (industrial) | 0C to +70C (commercial grade) |
| Debug Interface | JTAG / debugWIRE | — |
| Throughput | 8 MIPS at 8 MHz | — |
| Status RoHS | Compliant | — |
| Core Architecture | — | AVR 8-bit RISC |
| Program Memory (Flash) | — | 32 KB (16K x 16) |
| Frekuensi Klock Maksimum | — | 8 MHz |
| MIPS Throughput | — | 8 MIPS at 8 MHz |
| Supply Voltage (Vcc) | — | 2.7 V to 5.5 V |
| General-Purpose I/O Pins | — | 32 |
| Timer/Counters | — | 3 (two 8-bit, one 16-bit) |
| Communication Interfaces | — | USART, SPI, TWI (I2C) |
| On-chip Debug | — | JTAG (IEEE 1149.1 compliant) |
| Instruction Set | — | 131 instructions, mostly single-cycle |