BTH61002EPAXUMA1 vs ISP752TFUMA1 Pengandingan
Pengandingan Sisi Kiri Sisi Kanan Terperinci BTH61002EPAXUMA1 disebabkan oleh Infineon dan ISP752TFUMA1 disebabkan oleh Infineon. Bandingkan spesifikasi utama, parameter elektrik, pakej, status kehidupan, harga, dan keupayaan untuk menentukan komponen terbaik untuk keperluan disenjaya anda.
Infineon
BTH61002EPAXUMA1 - 2x 200mOhm 60V 48V Auto High-Side Switch | Infineon
BTH61002EPAXUMA1 ✓ Aktif
Pengandingan Spesifikasi
| Parametr | BTH61002EPAXUMA1 | ISP752TFUMA1 |
|---|---|---|
| Merek | Infineon | Infineon |
| Kategori | Power MOSFET Drivers | Power MOSFET Drivers |
| Status Lingkungan Hidup | Aktif | Aktif |
| Manufacturer | Infineon Technologies | — |
| Product Family | PROFET + 48V | — |
| Tetstruktur | Dual high-side switch (2 x 1:1) | — |
| Number of Channels | 2 | — |
| Switch Type | N-channel vertical power MOSFET with charge pump | — |
| Continuous Load Current per Channel | 2.0 A | — |
| Typical On-State Resistance (Ron) | 200 mOhm | — |
| Nominal Supply Voltage | 54 V | — |
| Maximum Operating Voltage | 60 V | — |
| Load Dump Capability | 60 V | — |
| Input Control Logic | Active-High / Active-Low | — |
| Diagnostic Function | Current sense output, open-load detection, short-to-ground/short-to-battery, overtemperature | — |
| Current Limitation | Adjustable | — |
| Kemasan | PG-TSDSO-14 (exposed pad) | — |
| Jenis Pemasangan | Surface Mount | Surface Mount |
| Automotive Qualification | AEC-Q100 | — |
| Gambaran Suhu Operasi | -40 C to +150 C [DATA_NEEDED: junction T_max] | — |
| Status RoHS | Compliant | Compliant |
| Product Type | — | Smart High-Side Power Switch |
| Series | — | PROFET™ Industrial |
| Switch Configuration | — | 1:1 (Single channel) |
| Konfigurasi Output | — | High-Side |
| Jenis Output | — | N-Channel |
| On-Resistance (Ron) | — | 200 mOhm |
| Continuous Load Current | — | 1.3 A |
| Tegangan Pemberi Arus Operasi | — | 6 V to 52 V |
| Input Type | — | Non-Inverting (logic-level) |
| Suhu Operasi | — | -30 C to +85 C |
| Kemasan / Case | — | PG-DSO-8-24 (DSO-8 with exposed pad) |
| Fault Protection | — | Overcurrent; Short-Circuit; Overtemperature; Overvoltage (load-dump); Reverse voltage |
| Diagnostic Output | — | Status flag |