BTS441RGATMA1 vs BTT60101ERBXUMA1 Pengandingan
Pengandingan Sisi Kiri Sisi Kanan Terperinci BTS441RGATMA1 disebabkan oleh Infineon dan BTT60101ERBXUMA1 disebabkan oleh Infineon. Bandingkan spesifikasi utama, parameter elektrik, pakej, status kehidupan, harga, dan keupayaan untuk menentukan komponen terbaik untuk keperluan disenjaya anda.
Infineon
BTT60101ERBXUMA1 - 10mΩ Smart High-Side Switch 9A 24V/48V | Infineon
BTT60101ERBXUMA1 ✓ AktifPengandingan Spesifikasi
| Parametr | BTS441RGATMA1 | BTT60101ERBXUMA1 |
|---|---|---|
| Merek | Infineon | Infineon |
| Kategori | Power MOSFET Drivers | Power MOSFET Drivers |
| Status Lingkungan Hidup | Aktif | Aktif |
| Manufacturer | Infineon Technologies AG | — |
| Part Number | BTS441RGATMA1 | — |
| Switch Type | 1:1 N-Channel High-Side | — |
| Bilangan Output | 1 | — |
| Continuous Load Current | 17 A | 9 A |
| Tetstruktur | Smart High-Side Switch | N-Channel vertical MOSFET with charge pump |
| Input Type | CMOS-compatible, ground referenced | — |
| Diagnostics | Yes (fault feedback) | — |
| Technology | Smart SIPMOS (N-channel vertical FET + charge pump) | — |
| Kemasan | PG-TO263-5-2 (TO-263-5) | PG-TDSO-14-11 (SOIC-14-EP, Exposed Pad) |
| Jenis Pemasangan | Surface Mount | Surface Mount |
| Bilangan Pin | 5 | — |
| Operating Voltage Range | [DATA_NEEDED: Vbb range, e.g. 6V-42V] | — |
| On-State Resistance (Rds(on)) | [DATA_NEEDED: Rds(on) at 25 C] | — |
| Over-Current Protection | Yes (integrated) | — |
| Thermal Protection | Yes (overtemperature shutdown) | — |
| Over-Voltage Protection | Yes (inductive load clamping) | — |
| Automotive Qualified | Yes (AEC-Q100 automotive grade) | — |
| Status RoHS | Compliant | — |
| Tape and Reel Quantity | 1000 (per reel) | — |
| Product Type | — | Smart High-Side Power Switch |
| Number of Channels | — | 1 |
| On-State Resistance (Typ) | — | 10 mΩ |
| Supply Voltage Range | — | 5 V to 36 V |
| Reverse Battery Protection | — | up to -36 V |
| Gambaran Suhu Operasi | — | -40 °C to +150 °C |
| Input Control Logic | — | Active High |
| Diagnostic Output | — | Status pin (ST) and current sense (IS) |
| Process Technology | — | Infineon Smart6 |
| Targeted Lamp Load | — | 5 × P21W 24 V or 1 × H55W 12 V |
| Compliance | — | RoHS |