BTS70802EPAXUMA1 vs BTG7003A1EPWXUMA2 Pengandingan
Pengandingan Sisi Kiri Sisi Kanan Terperinci BTS70802EPAXUMA1 disebabkan oleh Infineon dan BTG7003A1EPWXUMA2 disebabkan oleh Infineon. Bandingkan spesifikasi utama, parameter elektrik, pakej, status kehidupan, harga, dan keupayaan untuk menentukan komponen terbaik untuk keperluan disenjaya anda.
Infineon
BTG7003A1EPWXUMA2 - 15.7A PROFET Wire Guard High-Side Switch | Infineon
BTG7003A1EPWXUMA2 ✓ AktifPengandingan Spesifikasi
| Parametr | BTS70802EPAXUMA1 | BTG7003A1EPWXUMA2 |
|---|---|---|
| Merek | Infineon | Infineon |
| Kategori | Power MOSFET Drivers | Power MOSFET Drivers |
| Status Lingkungan Hidup | Aktif | Aktif |
| Product Type | High-Side Power Switch (PROFET) | — |
| Tetstruktur | 1:1 N-Channel High-Side, 2 channels | — |
| Number of Channels | 2 | 1 |
| Bilangan Output | 4 (2 outputs per channel architecture) | — |
| Continuous Load Current | 3 A (per channel) | — |
| On-Resistance (typ) | [DATA_NEEDED: Rdson at 25 C] | — |
| Supply Voltage (Vbb) | 5.5 V to 28 V (load dump tolerant) | — |
| Suhu Operasi | -40 C to +150 C (junction, automotive grade) | -40C to +150C (TJ) |
| Standby Current | [DATA_NEEDED: Istandby typ] | — |
| Input Type | Active High | — |
| Fault Feedback | Current sense / diagnostic output | — |
| Protection Features | Current limit, over-temperature shutdown, reverse battery, ground loss, Vbb loss, overvoltage clamp | — |
| Kemasan | PG-TSDSO-14-22 (14-pin, exposed pad) | PG-TSDSO-14-22 (exposed pad) |
| Jenis Pemasangan | Surface Mount | Surface Mount |
| Automotive Qualification | AEC-Q100 qualified | — |
| Status RoHS | Compliant | Compliant |
| Switch Type | — | High-Side Power Switch |
| Configuration | — | 1:1 N-Channel |
| Maximum Continuous Load Current | — | 15.7 A |
| Operating Voltage Range | — | 6 V to 18 V |
| Load Dump Tolerance | — | 40 V |
| Idle Mode Quiescent Current | — | 50 µA |
| On-Resistance R_DS(on) | — | 10 mΩ (typ) |
| Control Input | — | Active High |
| Wire Protection | — | Integrated I²t |
| Functional Safety | — | ISO 26262 compliant |