EPC4QQC100C vs EPC4QC100T Pengandingan
Pengandingan Sisi Kiri Sisi Kanan Terperinci EPC4QQC100C disebabkan oleh Altera dan EPC4QC100T disebabkan oleh Altera. Bandingkan spesifikasi utama, parameter elektrik, pakej, status kehidupan, harga, dan keupayaan untuk menentukan komponen terbaik untuk keperluan disenjaya anda.
Pengandingan Spesifikasi
| Parametr | EPC4QQC100C | EPC4QC100T |
|---|---|---|
| Merek | Altera | Altera |
| Kategori | Memory ICs | Memory ICs |
| Status Lingkungan Hidup | Aktif | NRND |
| Device Type | Enhanced Configuration Device (Configuration PROM) | — |
| Memory Density | 4 Mbit | 4 Mbit |
| Target FPGAs | Altera/Intel SRAM-based LUT FPGAs (Cyclone, Stratix, APEX families) | — |
| Operating Supply Voltage (VCC) | 3.0 V to 3.6 V (3.3 V typ) | — |
| Multi-volt I/O Support | 1.8 V / 2.5 V / 3.3 V (FPGAs with multi-volt configuration ports) | — |
| Configuration Modes Supported | FPP, PS, AS via cascading | — |
| JTAG / ISP Support | Yes (IEEE 1149.1 boundary-scan) | — |
| Cascade Support | Yes (for >4 Mbit FPGA bitstreams) | — |
| Kemasan | 100-pin PQFP (20x14 mm) | 100-pin PQFP (Plastic Quad Flat Pack), 20 x 14 mm |
| Gambaran Suhu Operasi | 0 C to +85 C (commercial) | — |
| Speed Grade | -C (commercial) | — |
| Lead-Free / RoHS | [DATA_NEEDED: lead-free/RoHS status] | Lead-free; RoHS compliance depends on date code |
| Jenis Pemasangan | Surface Mount | Surface Mount |
| Programming Tool | Quartus Programmer / Altera JTAG tools | — |
| Programming Voltage | 3.3 V (in-system, no external VPP required) | — |
| Aras MSL | [DATA_NEEDED: MSL rating] | 3 (per JEDEC J-STD-020) |
| Jenis Ingatan | — | Flash configuration PROM (non-volatile) |
| Configuration Interface | — | Serial / x8 Parallel (selectable) |
| Maximum Serial Clock Frequency | — | 66 MHz |
| Supported FPGAs | — | Altera/Intel Cyclone, Stratix, APEX families |
| Supply Voltage (VCC) | — | 3.0 V to 3.6 V (3.3 V typ) |
| I/O Voltage (VCCIO / MultiVolt) | — | 1.8 V / 2.5 V / 3.3 V / 5.0 V |
| In-System Programming | — | IEEE 1149.1 JTAG + serial interface |
| JTAG Support | — | Yes (1149.1 boundary-scan compliant) |
| Configuration Modes | — | Serial (1-bit) and Parallel (x8) |
| Daisy-Chain Support | — | Yes (EPC4-to-EPC4 only) |
| Suhu Operasi | — | -40 C to +85 C (industrial) |