INA114AU vs INA111AU Pengandingan
Pengandingan Sisi Kiri Sisi Kanan Terperinci INA114AU disebabkan oleh Texas Instruments dan INA111AU disebabkan oleh Texas Instruments. Bandingkan spesifikasi utama, parameter elektrik, pakej, status kehidupan, harga, dan keupayaan untuk menentukan komponen terbaik untuk keperluan disenjaya anda.
Texas Instruments
INA111AU - High-Speed FET-Input Instrumentation Amplifier | Texas Instruments
INA111AU ✓ AktifPengandingan Spesifikasi
| Parametr | INA114AU | INA111AU |
|---|---|---|
| Merek | Texas Instruments | Texas Instruments |
| Kategori | Amplifier ICs | Amplifier ICs |
| Status Lingkungan Hidup | Aktif | Aktif |
| Amplifier Type | Single-amplifier precision instrumentation amplifier | — |
| Gain-Bandwidth Product | 1 MHz | — |
| Input Noise | 11 nV/√Hz | — |
| Maximum Offset Voltage | 50 µV | — |
| Maximum Offset Voltage Drift | 0.25 µV/°C | — |
| Maximum Input Bias Current | 2 nA | — |
| Minimum Common-Mode Rejection | 115 dB | — |
| Input Overvoltage Protection | ±40 V | — |
| Maximum Supply Voltage | ±18 V | — |
| Minimum Supply Voltage | ±2.25 V | — |
| Maximum Quiescent Current | 3 mA | — |
| Gain Range | 1 to 10,000 | 1 to 1000 |
| Slew Rate | 0.06 V/µs | 17 V/us |
| Gambaran Suhu Operasi | -40°C to +85°C | -40 C to +85 C |
| Kemasan | 16-pin SOIC, 3.9 mm wide | 16-pin SOIC (DW) |
| Jenis Pemasangan | Surface mount | Surface mount |
| Internal Architecture | Three-op-amp instrumentation amplifier | — |
| RoHS Compliance | [DATA_NEEDED: RoHS compliance status] | — |
| REACH Compliance | [DATA_NEEDED: REACH compliance status] | — |
| AEC-Q100 Qualification | [DATA_NEEDED: AEC-Q100 qualification status] | [DATA_NEEDED: AEC-Q100 qualification] |
| Product Type | — | High-speed FET-input instrumentation amplifier |
| Number of Circuits | — | 1 circuit |
| Bandwidth | — | 2 MHz |
| Input Bias Current | — | 20 pA maximum |
| Input Offset Voltage | — | 500 uV maximum |
| Input Offset Voltage Drift | — | 5 uV/C maximum |
| Common-Mode Rejection Ratio | — | 106 dB minimum |
| Supply Voltage Range | — | ±6 V to ±18 V |
| Architecture | — | Current-feedback instrumentation amplifier |
| Input Type | — | FET input |
| Status RoHS | — | [DATA_NEEDED: RoHS status] |
| REACH Status | — | [DATA_NEEDED: REACH status] |