ISO1042QDWVQ1 vs ISO1042BDWV Pengandingan
Pengandingan Sisi Kiri Sisi Kanan Terperinci ISO1042QDWVQ1 disebabkan oleh Texas Instruments dan ISO1042BDWV disebabkan oleh Texas Instruments. Bandingkan spesifikasi utama, parameter elektrik, pakej, status kehidupan, harga, dan keupayaan untuk menentukan komponen terbaik untuk keperluan disenjaya anda.
Texas Instruments
ISO1042BDWV - Isolated CAN FD Transceiver 5Mbps 70V | TI (Tape & Reel)
ISO1042BDWV ✓ AktifPengandingan Spesifikasi
| Parametr | ISO1042QDWVQ1 | ISO1042BDWV |
|---|---|---|
| Merek | Texas Instruments | Texas Instruments |
| Kategori | Interface ICs | Interface ICs |
| Status Lingkungan Hidup | Aktif | Aktif |
| Harga Unit (USD) | — | $1.58 |
| Product Type | Galvanically isolated CAN FD transceiver | Isolated CAN transceiver |
| CAN Standard | ISO11898-2:2016 | — |
| Maximum CAN FD Data Rate | 5 Mbps | — |
| DC Bus Fault Protection | -70 V to +70 V | — |
| Common-Mode Voltage Range | -30 V to +30 V | — |
| Isolation Type | Galvanic isolation | Basic isolation, capacitive barrier |
| Automotive Qualification | Automotive product designation | — |
| Kemasan | 16-pin wide-body SOIC | 8-pin SOIC (DWV), wide body |
| Jenis Pemasangan | Surface mount | Surface Mount |
| Supply Voltage Range | [DATA_NEEDED: supply voltage range] | — |
| CAN Transceiver Mode | 1/1 isolated half CAN bus | — |
| Propagation Delay | [DATA_NEEDED: propagation delay] | — |
| Isolation Rating | [DATA_NEEDED: isolation withstand voltage] | — |
| Gambaran Suhu Operasi | [DATA_NEEDED: operating temperature range] | — |
| RoHS Compliance | [DATA_NEEDED: RoHS compliance] | — |
| REACH Compliance | [DATA_NEEDED: REACH compliance] | — |
| AEC-Q100 Qualification | [DATA_NEEDED: AEC-Q100 qualification status] | — |
| Ordering Quantity | [DATA_NEEDED: standard ordering quantity] | — |
| Protocol | — | CAN / CAN FD (ISO11898-2 2016) |
| Kadar Data | — | Up to 5 Mbps (flexible data rate) |
| Bus Fault Protection | — | 70 V |
| Working Isolation Voltage | — | 1060 Vrms |
| Logic-Side Supply Range (VCC1) | — | 1.8 V to 5.5 V |
| Bus-Side Supply Range (VCC2) | — | [DATA_NEEDED: bus-side supply range] |
| Loop Delay | — | 152 ns |
| ESD Protection (Bus Pins) | — | +/-16 kV HBM |
| Duplex | — | Half duplex, 1 driver / 1 receiver |
| Suhu Operasi | — | -40C to +125C |
| Protection Features | — | Thermal shutdown, bus fault protection |
| Status RoHS | — | Compliant |