ISO1450DW vs ISO1450BDW Pengandingan
Pengandingan Sisi Kiri Sisi Kanan Terperinci ISO1450DW disebabkan oleh Texas Instruments dan ISO1450BDW disebabkan oleh Texas Instruments. Bandingkan spesifikasi utama, parameter elektrik, pakej, status kehidupan, harga, dan keupayaan untuk menentukan komponen terbaik untuk keperluan disenjaya anda.
Texas Instruments
ISO1450DW - 50 Mbps 5 kVrms Isolated RS-485/RS-422 | Texas Instruments
ISO1450DW ✓ AktifTexas Instruments
ISO1450BDW - 50Mbps 5kVrms RS-485/422 Isolated Transceiver | TI
ISO1450BDW ✓ AktifPengandingan Spesifikasi
| Parametr | ISO1450DW | ISO1450BDW |
|---|---|---|
| Merek | Texas Instruments | Texas Instruments |
| Kategori | Interface ICs | Interface ICs |
| Status Lingkungan Hidup | Aktif | Aktif |
| Product Type | Isolated RS-485/RS-422 transceiver | — |
| Transceiver Configuration | 1/1 half-duplex | — |
| Maximum Data Rate | 50 Mbps | 50 Mbps |
| Isolation Voltage | 5 kVrms | — |
| Supply Voltage Range | 1.71 V to 5.5 V | — |
| Gambaran Suhu Operasi | -40 °C to 125 °C | -40 C to +125 C |
| Kemasan | 16-pin SOIC wide-body (DW) | SOIC-16 wide-body (DW) |
| Jenis Pemasangan | Surface mount | Surface Mount |
| Supported Standards | TIA/EIA RS-485 and RS-422 | — |
| Differential Communication | Yes | — |
| Direction Control | Half-duplex | — |
| EMC Protection | EMC protected | — |
| Isolation Type | Galvanic isolation | — |
| Logic Compatibility | 1.71 V to 5.5 V supply operation | — |
| Manufacturer Evaluation Module | ISO1410DWEVM for related ISO1410 evaluation | — |
| Status RoHS | [DATA_NEEDED: RoHS status] | Compliant |
| REACH Status | [DATA_NEEDED: REACH status] | — |
| AEC-Q100 Qualification | [DATA_NEEDED: AEC-Q100 qualification] | — |
| Protocol | — | RS-422, RS-485 (TIA/EIA-485-A, TIA/EIA-422-B) |
| Number of Drivers/Receivers | — | 1/1 |
| Duplex | — | Half |
| Isolation Voltage (rms) | — | 5000 Vrms (per UL 1577) |
| Working Isolation Voltage (VIOWM) | — | 1060 Vrms |
| Surge Isolation Voltage (VIOSM) | — | 10000 Vpk |
| Integrated Isolated Power | — | No |
| Supply Voltage (VCC1, VCC2) | — | 3 V to 5.5 V [DATA_NEEDED: each rail tolerance] |
| Bus Common-Mode Voltage Range | — | -7 V to +12 V [DATA_NEEDED: confirmed in datasheet] |
| Bus Pins ESD (IEC 61000-4-2) | — | [DATA_NEEDED: contact/air discharge level] |
| Bus Pins EFT (IEC 61000-4-4) | — | [DATA_NEEDED: transient level] |
| Aras MSL | — | 2 (1 year floor life) [DATA_NEEDED: confirm from datasheet] |