ISO7741QDWWRQ1 vs ISO7741FQDWWQ1 Pengandingan
Pengandingan Sisi Kiri Sisi Kanan Terperinci ISO7741QDWWRQ1 disebabkan oleh Texas Instruments dan ISO7741FQDWWQ1 disebabkan oleh Texas Instruments. Bandingkan spesifikasi utama, parameter elektrik, pakej, status kehidupan, harga, dan keupayaan untuk menentukan komponen terbaik untuk keperluan disenjaya anda.
Texas Instruments
ISO7741QDWWRQ1 - 4-Ch Digital Isolator, 100Mbps | Texas Instruments
ISO7741QDWWRQ1 ✓ AktifTexas Instruments
ISO7741FQDWWQ1 - Automotive 4-Ch Digital Isolator | TI | 5700Vrms
ISO7741FQDWWQ1 ✓ AktifPengandingan Spesifikasi
| Parametr | ISO7741QDWWRQ1 | ISO7741FQDWWQ1 |
|---|---|---|
| Merek | Texas Instruments | Texas Instruments |
| Kategori | Interface ICs | Interface ICs |
| Status Lingkungan Hidup | Aktif | Aktif |
| Isolation Rating | 5700 Vrms (reinforced) | — |
| Number of Channels | 4 (3 forward / 1 reverse) | 4 (3 forward / 1 reverse) |
| Maximum Data Rate | 100 Mbps | — |
| Common-Mode Transient Immunity (CMTI) | 85 kV/us minimum | 85 kV/us (minimum) |
| Supply Voltage Range (each side) | 2.25 V to 5.5 V | — |
| Default Output State | High (F suffix variant) | Low (F suffix) |
| Propagation Delay | [DATA_NEEDED: propagation delay in ns] | 11 ns (typical) |
| Power Consumption | 1.7 mA per channel at 1 Mbps (typ) | — |
| Gambaran Suhu Operasi | -40C to +125C | — |
| Kemasan | 16-SOIC, extra-wide body (DWW), 14.00 mm width | 16-SOIC (0.551", 14.00 mm width) DWW |
| Creepage / Clearance | 8 mm (per extra-wide SOIC) | — |
| AEC-Q100 Qualification | Qualified, Grade 1 | Grade 1, automotive qualified |
| Isolation Technology | Capacitive coupling (OOK modulation) | — |
| Enable Pins | Yes (one per channel) | — |
| Jenis Pemasangan | Surface Mount | Surface Mount |
| Aras MSL | [DATA_NEEDED: MSL rating] | 2 (1 year floor life) |
| Status RoHS | Compliant | Compliant |
| Fungsi | — | Digital Isolator |
| Channel Direction | — | 3/1 (Unidirectional) |
| Kadar Data | — | 100 Mbps |
| Isolation Voltage | — | 5700 Vrms (DWW package) |
| Channel-to-Channel Skew | — | 2.5 ns (maximum) |
| Supply Voltage (VCC1, VCC2) | — | 2.25 V to 5.5 V |
| Supply Current per Channel (10 Mbps) | — | 4.3 mA |
| Suhu Operasi | — | -40C to +125C |
| ESD (HBM) | — | ±8 kV |
| ESD (Contact Discharge, IEC 61000-4-2) | — | ±4 kV |
| Insulation Type | — | Reinforced (UL 1577, VDE, CSA, TUV, CQC) |