KSZ8041FTLI vs KSZ8041TL-TR Pengandingan

Pengandingan Sisi Kiri Sisi Kanan Terperinci KSZ8041FTLI disebabkan oleh Microchip Technology dan KSZ8041TL-TR disebabkan oleh Microchip Technology. Bandingkan spesifikasi utama, parameter elektrik, pakej, status kehidupan, harga, dan keupayaan untuk menentukan komponen terbaik untuk keperluan disenjaya anda.

Microchip Technology
KSZ8041FTLI KSZ8041FTLI 10/100 Ethernet PHY | Microchip | 48-TQFP

KSZ8041FTLI 10/100 Ethernet PHY | Microchip | 48-TQFP

KSZ8041FTLI ✓ Aktif
Microchip Technology
KSZ8041TL-TR KSZ8041TL-TR 10/100 Ethernet PHY | Microchip | TQFP-48 (Tape & Reel)

KSZ8041TL-TR 10/100 Ethernet PHY | Microchip | TQFP-48 (Tape & Reel)

KSZ8041TL-TR ✓ Aktif

Pengandingan Spesifikasi

Parametr KSZ8041FTLI KSZ8041TL-TR
Merek Microchip Technology Microchip Technology
Kategori Interface ICs Interface ICs
Status Lingkungan Hidup Aktif Aktif
Product Type 10/100 Ethernet physical-layer transceiver 10BASE-T/100BASE-TX Ethernet physical-layer transceiver
Ethernet Speed Support 10Base-T and 100Base-TX —
Host Interface MII, RMII, and SMII —
Supply Architecture Single supply Single-supply
Crossover Support HP Auto-MDI/MDI-X —
Kemasan 48-pin TQFP 48-TQFP (7 x 7 mm)
Package Dimensions 7 mm x 7 mm —
Suhu Operasi -40 C to +85 C [DATA_NEEDED: operating temperature range]
Jenis Pemasangan Surface mount Surface mount
Manufacturer Microchip Technology —
Port Count 1 Ethernet port —
Media Type Twisted-pair copper —
Status RoHS [DATA_NEEDED: RoHS compliance] [DATA_NEEDED: RoHS status]
REACH Status [DATA_NEEDED: REACH compliance] [DATA_NEEDED: REACH status]
AEC-Q100 Qualification [DATA_NEEDED: AEC-Q100 qualification] —
Absolute Maximum Supply Voltage [DATA_NEEDED: absolute maximum supply voltage] —
Recommended Operating Supply Voltage [DATA_NEEDED: recommended operating supply voltage] —
Typical Operating Current [DATA_NEEDED: typical operating current] —
Transmit Signal Levels [DATA_NEEDED: 100Base-TX and 10Base-T transmit signal levels] —
Supported Data Rates — 10 Mb/s and 100 Mb/s
Host Interfaces — MII, RMII, and SMII
Cable Standard — 10BASE-T and 100BASE-TX
Mixed-Signal Design — Yes; intended to extend signaling distance while reducing power consumption
Auto MDI/MDIX — HP Auto MDI/MDIX
Interrupt Signal — INTRP on pin 32; optional PHY-register status-update signal
Number of Drivers/Receivers — 1 driver and 1 receiver
Device Type — Ethernet interface IC / physical-layer transceiver
Tegangan Pemberi Arus — [DATA_NEEDED: supply voltage range]
Interface Clock — [DATA_NEEDED: clock frequency]
Ethernet Magnetics — [DATA_NEEDED: supported magnetics and isolation configuration]
Automotive Qualification — [DATA_NEEDED: AEC-Q100 qualification]

Laporan Datasheet & Sumber

Lihat Semua Produk Buat BOQ Minta Bao Harga