LM2903QDRG4 vs LM2903DG4 Pengandingan
Pengandingan Sisi Kiri Sisi Kanan Terperinci LM2903QDRG4 disebabkan oleh Texas Instruments dan LM2903DG4 disebabkan oleh Texas Instruments. Bandingkan spesifikasi utama, parameter elektrik, pakej, status kehidupan, harga, dan keupayaan untuk menentukan komponen terbaik untuk keperluan disenjaya anda.
Pengandingan Spesifikasi
| Parametr | LM2903QDRG4 | LM2903DG4 |
|---|---|---|
| Merek | Texas Instruments | Texas Instruments |
| Kategori | Amplifier ICs | Amplifier ICs |
| Status Lingkungan Hidup | Aktif | Aktif |
| Comparator Type | Dual differential comparator | Dual differential comparator |
| Number of Channels | 2 independent channels | 2 channels |
| Jenis Output | Open collector | Open-collector |
| Maximum Supply Voltage | 36 V | — |
| Single-Supply Operating Range | 2 V to 36 V | — |
| Dual-Supply Total Range | 2 V to 36 V | — |
| Minimum Positive Supply Offset | 1.5 V | — |
| Supply Current Per Comparator | 0.4 mA typical | — |
| Input Bias Current | 25 nA typical | [DATA_NEEDED: input bias current] |
| Gambaran Suhu Operasi | -40°C to +125°C | [DATA_NEEDED: operating temperature range] |
| Kemasan | 8-pin SOIC | 8-pin SOIC, 0.154 inch (3.90 mm) width |
| Jenis Pemasangan | Surface mount | Surface mount |
| Automotive Qualification Coding | G4 ordering suffix | — |
| Output Pull-Up Requirement | [DATA_NEEDED: recommended pull-up resistance] | — |
| Input Common-Mode Range | [DATA_NEEDED: input common-mode voltage range] | — |
| Input Offset Voltage | [DATA_NEEDED: input offset voltage] | [DATA_NEEDED: input offset voltage] |
| Propagation Delay | [DATA_NEEDED: propagation delay] | — |
| Output Sink Current | [DATA_NEEDED: output sink current] | [DATA_NEEDED: output sink current] |
| Status RoHS | [DATA_NEEDED: RoHS compliance status] | [DATA_NEEDED: RoHS status] |
| REACH Status | [DATA_NEEDED: REACH compliance status] | [DATA_NEEDED: REACH status] |
| AEC-Q100 Qualification | [DATA_NEEDED: AEC-Q100 qualification status] | [DATA_NEEDED: AEC-Q100 qualification] |
| Supply Configuration | — | Single or dual supply |
| Maximum-Rated Supply Voltage | — | 32 V |
| Tested Differential Input Voltage | — | 30 V |
| Supply-Current Drain | — | 0.4 mA typical per comparator |
| Output Compatibility | — | TTL, MOS, and CMOS compatible |
| Common-Mode Input Range | — | Includes ground |
| Output Low-Level Voltage | — | [DATA_NEEDED: output low-level voltage] |