LM324DG vs LM324ADR2G Pengandingan
Pengandingan Sisi Kiri Sisi Kanan Terperinci LM324DG disebabkan oleh onsemi dan LM324ADR2G disebabkan oleh onsemi. Bandingkan spesifikasi utama, parameter elektrik, pakej, status kehidupan, harga, dan keupayaan untuk menentukan komponen terbaik untuk keperluan disenjaya anda.
Pengandingan Spesifikasi
| Parametr | LM324DG | LM324ADR2G |
|---|---|---|
| Merek | onsemi | onsemi |
| Kategori | Amplifier ICs | Amplifier ICs |
| Status Lingkungan Hidup | Aktif | Aktif |
| Number of Channels | 4 channels | — |
| Amplifier Type | Single-supply quad operational amplifier with true differential inputs | General Purpose |
| Supply Voltage Range | 3 V to 32 V | — |
| Gain-Bandwidth Product | 1 MHz | — |
| Slew Rate | 0.6 V/us | 0.6 V/µs |
| Input Offset Voltage | 5 mV to 7 mV | — |
| Minimum Common-Mode Rejection Ratio | 65 dB | — |
| Bilangan Pin | 14 pins | — |
| Kemasan | 14-pin SOIC | — |
| Jenis Pemasangan | Surface mount | Surface Mount |
| Operating Temperature Grade | Commercial temperature grade | — |
| Input Type | True differential inputs | — |
| Power Supply Configuration | Single supply | — |
| Gain | [DATA_NEEDED: voltage gain] | — |
| Input Bias Current | [DATA_NEEDED: input bias current] | [DATA_NEEDED: Input Bias Current] |
| Output Current | [DATA_NEEDED: output current] | — |
| Gambaran Suhu Operasi | [DATA_NEEDED: operating temperature range] | — |
| Status RoHS | [DATA_NEEDED: RoHS compliance status] | [DATA_NEEDED: RoHS status] |
| REACH Status | [DATA_NEEDED: REACH compliance status] | — |
| Number of Circuits | — | 4 |
| Supply Voltage Range (Single) | — | 3 V to 32 V |
| Supply Voltage Range (Split) | — | ±1.5 V to ±16 V |
| Gain Bandwidth Product | — | 1 MHz |
| Input Offset Voltage (Max) | — | 3 mV |
| Input Offset Voltage (Typ) | — | [DATA_NEEDED: Input Offset Voltage typical] |
| Technology | — | Bipolar |
| Kemasan / Case | — | 14-SOIC (0.154in, 3.90mm Width) |
| Suhu Operasi | — | 0C to +70C (Commercial) |
| Packaging | — | Tape & Reel (R2G suffix) |
| Supply Current (per amp, typical) | — | [DATA_NEEDED: Supply Current] |