LM339ADRG4 vs LM339DG Pengandingan
Pengandingan Sisi Kiri Sisi Kanan Terperinci LM339ADRG4 disebabkan oleh Texas Instruments dan LM339DG disebabkan oleh onsemi. Bandingkan spesifikasi utama, parameter elektrik, pakej, status kehidupan, harga, dan keupayaan untuk menentukan komponen terbaik untuk keperluan disenjaya anda.
Texas Instruments
LM339ADRG4 - Quad Open-Collector Comparator | Texas Instruments
LM339ADRG4 ✓ AktifPengandingan Spesifikasi
| Parametr | LM339ADRG4 | LM339DG |
|---|---|---|
| Merek | Texas Instruments | onsemi |
| Kategori | Amplifier ICs | Interface ICs |
| Status Lingkungan Hidup | Aktif | Aktif |
| Comparator Type | Quad differential comparator | 4-channel general-purpose analog comparator |
| Number of Channels | 4 channels | 4 channels |
| Jenis Output | Open collector | Open collector |
| Supply Voltage Range | 2 V to 36 V | — |
| Tested Supply Voltage | 30 V | — |
| Response Time | 300 ns | — |
| Supply Current Drain | 0.8 mA typical | — |
| Common-Mode Input Voltage Range | Includes ground | — |
| Differential Input Voltage Range | ±38 V maximum rated | — |
| Output Compatibility | TTL, MOS, and CMOS compatible | — |
| Bilangan Pin | 14 pins | — |
| Kemasan | 14-SOIC, 3.90 mm width | 14-pin SOIC |
| Jenis Pemasangan | Surface mount | Surface mount |
| Input Bias Current | [DATA_NEEDED: input bias current] | — |
| Input Offset Voltage | [DATA_NEEDED: input offset voltage] | — |
| Gambaran Suhu Operasi | [DATA_NEEDED: operating temperature range] | [DATA_NEEDED: operating temperature range] |
| Output Saturation Voltage | [DATA_NEEDED: output saturation voltage] | — |
| RoHS Compliance | [DATA_NEEDED: RoHS status] | — |
| REACH Compliance | [DATA_NEEDED: REACH status] | — |
| Single-Supply Operating Voltage Range | — | 3 V to 36 V |
| Typical Input Bias Current | — | 25 nA |
| Typical Input Offset Current | — | 5 nA |
| Typical Supply-Current Drain | — | 0.8 mA |
| Logic Compatibility | — | CMOS, TTL, and MOS |
| Number of Inputs | — | 8 inputs |
| Bilangan Output | — | 4 outputs |
| Supply Configuration | — | Single supply or dual supply |
| Primary Application | — | Level detection |
| Additional Applications | — | Low-level sensing and memory applications |
| Status RoHS | — | [DATA_NEEDED: RoHS compliance status] |
| REACH Status | — | [DATA_NEEDED: REACH compliance status] |
| Automotive Qualification | — | [DATA_NEEDED: AEC-Q100 qualification status] |