LM339M vs LM339DRE4 Pengandingan
Pengandingan Sisi Kiri Sisi Kanan Terperinci LM339M disebabkan oleh Texas Instruments dan LM339DRE4 disebabkan oleh Texas Instruments. Bandingkan spesifikasi utama, parameter elektrik, pakej, status kehidupan, harga, dan keupayaan untuk menentukan komponen terbaik untuk keperluan disenjaya anda.
Pengandingan Spesifikasi
| Parametr | LM339M | LM339DRE4 |
|---|---|---|
| Merek | Texas Instruments | Texas Instruments |
| Kategori | Amplifier ICs | Logic ICs |
| Status Lingkungan Hidup | Aktif | Aktif |
| Comparator Type | Quad differential voltage comparator | Quad differential comparator |
| Number of Comparators | 4 independent comparators | — |
| Supply Voltage Range | 2 V to 36 V | 2 V to 36 V |
| Gambaran Tegangan Masukan | ±1 V to ±18 V | — |
| Response Time | 1.3 µs | 300 ns |
| Supply Current Drain | 800 µA typical | — |
| Input Bias Current | 25 nA typical | 3.5 nA |
| Jenis Output | Open-collector | Open-collector |
| Kemasan | 14-pin SOIC | 14-pin SOIC |
| Suhu Operasi | 0 °C to +70 °C | — |
| Jenis Pemasangan | Surface mount | Surface mount |
| Bilangan Pin | 14 pins | — |
| Application Category | Standard general-purpose comparator | — |
| Logic Compatibility | Open-collector external pull-up interface | — |
| Manufacturer | Texas Instruments | — |
| Datasheet Description | Low-power low-offset voltage quad comparators | — |
| Input Common-Mode Range | Includes ground in single-supply operation | — |
| Drop-in Replacement Status | Use only verified pin-compatible alternatives | — |
| Number of Channels | — | 4 channels |
| Maximum Supply Rating | — | 38 V |
| Tested Supply Voltage | — | 30 V |
| Input Offset Voltage | — | 0.37 mV |
| Input Offset Voltage Maximum | — | 9 mV |
| Arus Pemberi Arus | — | 200 µA per comparator |
| Common-Mode Input Upper Limit | — | VCC - 1.5 V |
| Negative Input Swing Limit | — | -0.3 V below negative supply |
| ESD Rating HBM | — | 2 kV |
| Operating Temperature Grade | — | 0 °C to 70 °C |
| Status RoHS | — | [DATA_NEEDED: RoHS status] |
| REACH Status | — | [DATA_NEEDED: REACH status] |