MAX1243ACPA vs MAX1243AEPA Pengandingan
Pengandingan Sisi Kiri Sisi Kanan Terperinci MAX1243ACPA disebabkan oleh Maxim Integrated dan MAX1243AEPA disebabkan oleh Maxim Integrated. Bandingkan spesifikasi utama, parameter elektrik, pakej, status kehidupan, harga, dan keupayaan untuk menentukan komponen terbaik untuk keperluan disenjaya anda.
Maxim Integrated
MAX1243AEPA - 10-Bit Serial ADC, 73ksps, DIP-8 | Maxim Integrated
MAX1243AEPA ✓ AktifPengandingan Spesifikasi
| Parametr | MAX1243ACPA | MAX1243AEPA |
|---|---|---|
| Merek | Maxim Integrated | Maxim Integrated |
| Kategori | ADC/DAC | ADC/DAC |
| Status Lingkungan Hidup | Aktif | Aktif |
| Pemecahkatan | 10 bits | 10 bits |
| Architecture | SAR (Successive Approximation Register) | SAR (Successive Approximation) |
| Number of Channels | 1 | 1 |
| kadar sampling | 73 kSPS | 73 ksps (max) |
| Conversion Time | 7.5 us | 7.5 us (typ) |
| Track/Hold Acquisition Time | 1.5 us | — |
| Integral Nonlinearity (INL) | +/-0.5 LSB (A grade) | — |
| Supply Voltage (VDD) | +2.7 V to +5.25 V | +2.7 V to +5.25 V |
| Analog Input Range | 0 V to VREF | — |
| External Reference Voltage | Up to VDD | — |
| Operating Supply Current | 1.0 mA (typ) | — |
| Arus penyah hidup | 2 uA (typ) | — |
| Antaramuka | 3-wire SPI/QSPI/MICROWIRE-compatible | — |
| Kemasan | 8-pin PDIP (through-hole) | PDIP-8 (0.3 inch, plastic DIP) |
| Gambaran Suhu Operasi | 0 C to +70 C | — |
| Jenis Pemasangan | Through-Hole (DIP) | Through-Hole |
| Status RoHS | Compliant | [DATA_NEEDED: RoHS status for MAX1243AEPA - non-plus variant] |
| Track-and-Hold Acquisition Time | — | 1.5 us (typ) |
| Supply Current (Operating) | — | 3 mA (max) |
| Supply Current (Power-Down) | — | 2 uA (typ, via CS de-assertion) |
| Reference Type | — | External (REF input) |
| Input Type | — | Single-ended, unipolar |
| Gambaran Tegangan Masukan | — | 0 V to VREF |
| Digital Interface | — | 3-wire SPI / QSPI / MICROWIRE |
| Configuration | — | S/H-ADC, ratio 1:1 |
| Suhu Operasi | — | -40 C to +85 C (industrial) |
| Aras MSL | — | 1 (through-hole, no MSL seal requirement) |