MAX232CPE vs ADM232AANZ Pengandingan
Pengandingan Sisi Kiri Sisi Kanan Terperinci MAX232CPE disebabkan oleh Maxim Integrated dan ADM232AANZ disebabkan oleh Analog Devices. Bandingkan spesifikasi utama, parameter elektrik, pakej, status kehidupan, harga, dan keupayaan untuk menentukan komponen terbaik untuk keperluan disenjaya anda.
Pengandingan Spesifikasi
| Parametr | MAX232CPE | ADM232AANZ |
|---|---|---|
| Merek | Maxim Integrated | Analog Devices |
| Kategori | Interface ICs | Interface ICs |
| Status Lingkungan Hidup | Aktif | Aktif |
| Fungsi | RS-232 Transceiver (2 Drivers / 2 Receivers) | — |
| Protocol | EIA/TIA-232E, V.28/V.24 | — |
| Tegangan Pemberi Arus | 4.5 V to 5.5 V (single 5 V supply) | 5 V |
| Kadar Data | 120 kbps | — |
| Number of Drivers | 2 | 2 |
| Number of Receivers | 2 | 2 |
| Driver Output Voltage Swing | ±9 V typical (RS-232 load) | — |
| Receiver Input Voltage Range | ±25 V | — |
| Arus Pemberi Arus | 8 mA typical | [DATA_NEEDED: supply current] |
| Charge Pump Capacitors | 4 x 1 µF external | — |
| Suhu Operasi | 0°C to +70°C (commercial grade) | — |
| Kemasan | 16-pin PDIP (PE) | 16-lead DIP, 0.300 inch (7.62 mm) pitch |
| Jenis Pemasangan | Through-Hole | Through-hole |
| ESD Protection | [DATA_NEEDED: ESD rating on driver outputs] | — |
| Status RoHS | See compliance_info | [DATA_NEEDED: RoHS status] |
| Product Type | — | Dual RS-232 line driver and receiver transceiver |
| Maximum Transmission Rate | — | 200 kB/s |
| Charge-Pump Capacitor Value | — | 0.1 µF |
| On-Board DC-DC Converter | — | Present |
| RS-232 Output Swing | — | Approximately ±9 V with a 5 V supply |
| Receiver Input Levels | — | Up to ±30 V |
| Interface Compliance | — | EIA-232-E and V.28 |
| Gambaran Suhu Operasi | — | [DATA_NEEDED: operating temperature range] |
| Driver Output Voltage | — | [DATA_NEEDED: driver output voltage] |
| Receiver Input Resistance | — | [DATA_NEEDED: receiver input resistance] |
| REACH Status | — | [DATA_NEEDED: REACH status] |
| Automotive Qualification | — | [DATA_NEEDED: AEC-Q100 qualification status] |
| Standard Packaging Quantity | — | [DATA_NEEDED: standard packaging quantity] |