MPVZ7025GP vs MPVZ5004G6U Pengandingan
Pengandingan Sisi Kiri Sisi Kanan Terperinci MPVZ7025GP disebabkan oleh NXP Semiconductors dan MPVZ5004G6U disebabkan oleh STMicroelectronics. Bandingkan spesifikasi utama, parameter elektrik, pakej, status kehidupan, harga, dan keupayaan untuk menentukan komponen terbaik untuk keperluan disenjaya anda.
STMicroelectronics
MPVZ5004G6U - 3.92kPa Vented Gauge Pressure Sensor 8-SMD | ST
MPVZ5004G6U ✓ AktifPengandingan Spesifikasi
| Parametr | MPVZ7025GP | MPVZ5004G6U |
|---|---|---|
| Merek | NXP Semiconductors | STMicroelectronics |
| Kategori | Pressure Sensors | Pressure Sensors |
| Status Lingkungan Hidup | Aktif | Aktif |
| Pressure Type | Compound (Gauge) -25 kPa to +25 kPa | Vented Gauge |
| Pressure Range | ±3.63 PSI (±25 kPa) | — |
| Jenis Output | Analog Voltage | Analog Voltage |
| Gambaran Tegangan Output | 0.2 V to 4.7 V | — |
| Tegangan Pemberi Arus | 4.75 V to 5.25 V (5 V typical) | 5 V typical |
| Port Style | Male - 0.13" (3.17 mm) Tube, Side | — |
| Kemasan / Case | 8-SMD, Gull Wing, Side Port | — |
| Jenis Pemasangan | Surface Mount | Surface Mount |
| Jenis Sensus | Piezoresistive Silicon Pressure Sensor | — |
| Suhu Operasi | -40 °C to +125 °C (per NXP datasheet family) | 0 to 85 degrees Celsius |
| Compensated Temperature | 0 °C to +85 °C | — |
| On-Chip Signal Conditioning | Yes | — |
| On-Chip Calibration | Yes | — |
| Status RoHS | Compliant | Compliant |
| Moisture Sensitivity (MSL) | [DATA_NEEDED: MSL level] | — |
| Supplier Device Package | SOP 8-pin with gauge port | — |
| Operating Pressure Range | — | 0 to 3.92 kPa (0 to 0.57 PSI) |
| Maximum Overload Pressure | — | [DATA_NEEDED: maximum overload pressure] |
| Output Voltage Span | — | 1 V to 4.9 V (at 5 V supply) |
| Accuracy | — | [DATA_NEEDED: accuracy] |
| Arus Pemberi Arus | — | [DATA_NEEDED: supply current] |
| Response Time | — | 1 ms typical |
| Kemasan | — | 8-SMD Module |
| Pressure Port | — | Single axial vent port (gauge reference) |
| Sensor Technology | — | Piezoresistive MEMS |
| Output Ratiometric | — | Yes (scales with VDD) |