PCM1796DB vs PCM1794DB Pengandingan
Pengandingan Sisi Kiri Sisi Kanan Terperinci PCM1796DB disebabkan oleh Texas Instruments dan PCM1794DB disebabkan oleh Texas Instruments. Bandingkan spesifikasi utama, parameter elektrik, pakej, status kehidupan, harga, dan keupayaan untuk menentukan komponen terbaik untuk keperluan disenjaya anda.
Pengandingan Spesifikasi
| Parametr | PCM1796DB | PCM1794DB |
|---|---|---|
| Merek | Texas Instruments | Texas Instruments |
| Kategori | ADC/DAC | ADC/DAC |
| Status Lingkungan Hidup | Aktif | Unknown |
| Converter Type | Stereo audio digital-to-analog converter | Stereo audio digital-to-analog converter |
| DAC Architecture | Advanced segment DAC | Advanced segment DAC |
| Pemecahkatan | 24 bit | — |
| Maximum Sampling Rate | 192 kHz | 192 kHz |
| DSD Rate | 200 kHz | — |
| Signal-to-Noise Ratio | 123 dB | — |
| Konfigurasi Output | Balanced current outputs | Balanced current outputs |
| Digital Audio Interface | PCM serial interface | I2S, PCM, and left-justified |
| Control Method | Software control | — |
| Core Supply Voltage Range | 3 V to 3.6 V | — |
| Analog Supply Voltage Range | 4.75 V to 5.25 V | — |
| Gambaran Suhu Operasi | -25 C to +85 C | [DATA_NEEDED: operating temperature range] |
| Kemasan | 28-pin SSOP (DB) | 28-lead SSOP |
| Lead Count | 28 pins | — |
| Process Technology | Monolithic CMOS | CMOS |
| Jenis Pemasangan | Surface mount | — |
| Status RoHS | unknown | [DATA_NEEDED: RoHS status] |
| REACH Status | unknown | [DATA_NEEDED: REACH status] |
| Clock Jitter Tolerance | Improved by advanced segment DAC architecture | Improved tolerance; exact value not stated |
| Output Impedance | [DATA_NEEDED: Output impedance] | — |
| THD+N | [DATA_NEEDED: THD+N] | 0.0004% typical |
| Data Resolution | — | 24 bit |
| Digital Input Tolerance | — | 5 V tolerant |
| Supply Condition for Electrical Characteristics | — | VCC1 = VCC2L = VCC2R = 5 V, VDD = 3.3 V |
| Reference Test Condition | — | TA = 25 degrees C |
| Reference System Clock | — | 256 fS |
| Reference Sampling Rate | — | 44.1 kHz |
| Initialization Requirement | — | 1024 system clock periods after reset |
| Dynamic Range | — | 9 V rms mono; 4.5 V rms stereo; 2 V rms stereo |