S912XET256J2CAG vs S912XDT256F1VAA Pengandingan
Pengandingan Sisi Kiri Sisi Kanan Terperinci S912XET256J2CAG disebabkan oleh NXP Semiconductors dan S912XDT256F1VAA disebabkan oleh NXP Semiconductors. Bandingkan spesifikasi utama, parameter elektrik, pakej, status kehidupan, harga, dan keupayaan untuk menentukan komponen terbaik untuk keperluan disenjaya anda.
NXP Semiconductors
S912XET256J2CAG - 50MHz 256KB 16-Bit Automotive MCU | NXP
S912XET256J2CAG ✓ AktifNXP Semiconductors
S912XDT256F1VAA - 16-bit HCS12X MCU, 256KB Flash, 80MHz | NXP
S912XDT256F1VAA ✗ Akhir HayatPengandingan Spesifikasi
| Parametr | S912XET256J2CAG | S912XDT256F1VAA |
|---|---|---|
| Merek | NXP Semiconductors | NXP Semiconductors |
| Kategori | Microcontrollers | Microcontrollers |
| Status Lingkungan Hidup | Aktif | Akhir Hidup |
| CPU Type | S12X 16-bit core | — |
| Maximum CPU Frequency | 50 MHz | — |
| Flash Memory | 256 KB | — |
| Microcontroller Class | 16-bit MCU | — |
| Architecture | HCS12X with XGATE co-processor | — |
| Kemasan | 144-LQFP, 20 mm x 20 mm | — |
| Suhu Operasi | -40°C to +85°C | -40 C to +105 C (Automotive/Industrial) |
| Automotive Qualification | Automotive qualified | — |
| ADC Resolution | 12-bit | — |
| ADC Conversion Time | 3 µs | — |
| Memory Protection | Memory protection unit | — |
| Software Protection Modes | Supervisor/user modes | — |
| Programmable Storage | Programmable hardware-emulated EEPROM | — |
| Timer Peripherals | Enhanced capture timer, periodic interrupt timer, real-time interrupt timer | — |
| Co-Processor | XGATE co-processor | — |
| Jenis Pemasangan | Surface-mount gull-wing LQFP | Surface Mount (Gull Wing) |
| Status Lingkungan Hidup | Active | — |
| Status RoHS | [DATA_NEEDED: RoHS compliance status] | [DATA_NEEDED: RoHS status] |
| REACH Status | [DATA_NEEDED: REACH compliance status] | — |
| Tegangan Pemberi Arus | [DATA_NEEDED: operating supply voltage] | — |
| External Clock | [DATA_NEEDED: external clock requirements] | — |
| GPIO Count | [DATA_NEEDED: general-purpose I/O count] | — |
| Communication Interfaces | [DATA_NEEDED: available communication interface list] | — |
| Core Architecture | — | HCS12X (S12X CPU + XGATE co-processor) |
| Lebar Bus Data | — | 16-bit |
| CPU Clock Frequency (Max) | — | 80 MHz |
| Program Memory (Flash) | — | 256 KB (256K x 8) |
| RAM | — | 14 KB |
| EEPROM | — | 4 KB |
| Supply Voltage Range | — | 2.5 V to 5.5 V |
| Package Type | — | 80-QFP (PQFP-80, 14x14 mm) |
| Kiraan Pin | — | 80 |
| CAN Controllers | — | 2 (CAN 2.0 A/B, msCAN) |
| SPI | — | 3 |
| SCI/UART | — | 8 |
| I2C | — | 2 |
| ADC | — | 16-channel, 10-bit |
| Timers/PWM | — | 8-channel 16-bit (ECT) |
| Debug Interface | — | BDM + JTAG |
| On-chip Voltage Regulator | — | Yes (single 5V supply) |
| Instruction Set Compatibility | — | Upward-compatible with HCS12, enhanced indexed addressing, instruction queue |