SN65HVD230QDRQ1 vs SN65HVD255QDRQ1 Pengandingan
Pengandingan Sisi Kiri Sisi Kanan Terperinci SN65HVD230QDRQ1 disebabkan oleh Texas Instruments dan SN65HVD255QDRQ1 disebabkan oleh Texas Instruments. Bandingkan spesifikasi utama, parameter elektrik, pakej, status kehidupan, harga, dan keupayaan untuk menentukan komponen terbaik untuk keperluan disenjaya anda.
Texas Instruments
SN65HVD230QDRQ1 - 3.3V CAN Transceiver AEC-Q100 | Texas Instruments
SN65HVD230QDRQ1 ✓ AktifPengandingan Spesifikasi
| Parametr | SN65HVD230QDRQ1 | SN65HVD255QDRQ1 |
|---|---|---|
| Merek | Texas Instruments | Texas Instruments |
| Kategori | Interface ICs | Interface ICs |
| Status Lingkungan Hidup | Aktif | Aktif |
| Harga Unit (USD) | $1.11 | $0.94 |
| Transceiver Type | CAN (Half-duplex, 1 driver / 1 receiver) | — |
| Kadar Data | Up to 1 Mbps | >1 Mbps (turbo mode) |
| Tegangan Pemberi Arus | 3.3 V | 3.3 V |
| Standby Mode Current | 370 uA (typical) | — |
| Bus Pin ESD Protection | Exceeds 15 kV HBM | — |
| Device ESD Rating | Exceeds 2000 V per MIL-STD-883 | — |
| Protocol Compatibility | ISO 11898-2 High Speed CAN Physical Layer | — |
| Standby Mode | Yes (RS pin controlled) | — |
| Dominant Timeout | Yes | — |
| Slew Rate Control | Yes (RS pin) | — |
| Unpowered Node Behavior | Does not disturb the bus | — |
| Gambaran Suhu Operasi | -40C to +125C | [DATA_NEEDED: operating temperature range] |
| AEC-Q100 Qualification | Qualified (Automotive Catalog) | — |
| Kemasan | 8-SOIC (D), 3.90 mm width | SOIC-8 (D) |
| Jenis Pemasangan | Surface Mount | Surface Mount |
| Packaging | Tape & Reel (DR) | — |
| Fungsi | — | Turbo CAN Transceiver |
| Protocol | — | ISO 11898 compatible CAN |
| Duplex | — | Half-duplex |
| Number of Transceivers | — | 1 |
| Automotive Qualification | — | AEC-Q100 Qualified |
| Short-Circuit Protection | — | Yes |
| Pengumpasan Panas | — | Yes |
| Mode Select | — | RS pin (slope control / high speed) |
| Family | — | SN65HVD25x Turbo CAN |
| Arus Dalam Tentera | — | [DATA_NEEDED: quiescent current] |
| Bus Fault Voltage Tolerance | — | [DATA_NEEDED: bus fault voltage tolerance] |
| Status RoHS | — | [DATA_NEEDED: RoHS status] |