STM32H743XGH6 vs STM32F429VGT6 Pengandingan
Pengandingan Sisi Kiri Sisi Kanan Terperinci STM32H743XGH6 disebabkan oleh STMicroelectronics dan STM32F429VGT6 disebabkan oleh STMicroelectronics. Bandingkan spesifikasi utama, parameter elektrik, pakej, status kehidupan, harga, dan keupayaan untuk menentukan komponen terbaik untuk keperluan disenjaya anda.
STMicroelectronics
STM32H743XGH6 - 480MHz 1MB MCU | STMicroelectronics | TFBGA
STM32H743XGH6 ✓ AktifSTMicroelectronics
STM32F429VGT6 - 180MHz Cortex-M4 MCU 1MB Flash LQFP-100 | ST (Tape & Reel)
STM32F429VGT6 ✓ AktifPengandingan Spesifikasi
| Parametr | STM32H743XGH6 | STM32F429VGT6 |
|---|---|---|
| Merek | STMicroelectronics | STMicroelectronics |
| Kategori | Microcontrollers | Microcontrollers |
| Status Lingkungan Hidup | Aktif | Aktif |
| Product Type | 32-bit ARM Cortex-M7 microcontroller | — |
| Maximum Core Frequency | 480 MHz | — |
| Flash Memory | 1 MB (1M x 8) | 1 MB |
| RAM | 1 MB | — |
| CPU Architecture | Arm Cortex-M7 | — |
| Instruction Set | 32-bit RISC | — |
| Kemasan | 240+25-TFBGA (14 mm x 14 mm) | LQFP-100 (14 x 14 mm) |
| Ball Count | 265 balls | — |
| Jenis Pemasangan | Surface Mount | Surface Mount |
| Operating Voltage | [DATA_NEEDED: operating voltage range] | 1.8 V to 3.6 V |
| Suhu Operasi | [DATA_NEEDED: operating temperature range] | -40 C to +85 C (grade 6) |
| I/O Voltage | [DATA_NEEDED: I/O voltage range] | — |
| Ethernet Support | [DATA_NEEDED: Ethernet support details] | — |
| USB Support | [DATA_NEEDED: USB support details] | — |
| ADC | [DATA_NEEDED: ADC resolution and channel count] | 3 x 12-bit, up to 2.4 MSPS |
| Timers | [DATA_NEEDED: timer resources] | 17 (including 12 x 16-bit, 2 x 32-bit) |
| Communication Interfaces | [DATA_NEEDED: communication interface list] | — |
| External Memory Interfaces | [DATA_NEEDED: external memory interface details] | — |
| Status RoHS | unknown | Compliant |
| REACH Status | unknown | — |
| AEC-Q100 Qualification | unknown | — |
| Lead-Free Status | unknown | — |
| Core | — | ARM Cortex-M4 with FPU and DSP instructions |
| CPU Maximum Frequency | — | 180 MHz |
| DMIPS Performance | — | 225 DMIPS (1.25 DMIPS/MHz, Dhrystone 2.1) |
| SRAM | — | 192 KB (including 4 KB backup SRAM) |
| ART Accelerator | — | Yes (0-wait-state Flash execution) |
| MPU | — | Yes (memory protection unit) |
| LCD-TFT Controller | — | Yes, up to XGA resolution |
| DMA2D (Chrom-ART) | — | Yes |
| USB OTG | — | HS + FS (with on-chip PHY) |
| Ethernet MAC | — | 10/100 with IEEE 1588v2 |
| CAN Controllers | — | 2 x CAN 2.0B active |
| DAC | — | 2 x 12-bit |
| GPIOs | — | Up to 82 fast GPIOs |
| Crypto/Hash Accelerator | — | AES-128/192/256, SHA-1, MD5, 3DES |
| SDMMC | — | 1 x SDMMC host |
| Communication Peripherals | — | UART, SPI, I2C, SAI, SPDIF-Rx |
| Aras MSL | — | 3 (168 hours) |