STM8L162M8T6 vs STM8L152R8T6 Pengandingan
Pengandingan Sisi Kiri Sisi Kanan Terperinci STM8L162M8T6 disebabkan oleh STMicroelectronics dan STM8L152R8T6 disebabkan oleh STMicroelectronics. Bandingkan spesifikasi utama, parameter elektrik, pakej, status kehidupan, harga, dan keupayaan untuk menentukan komponen terbaik untuk keperluan disenjaya anda.
STMicroelectronics
STM8L162M8T6 - 8-Bit Ultra-Low-Power MCU, 64KB Flash | STMicroelectronics
STM8L162M8T6 ✓ AktifSTMicroelectronics
STM8L152R8T6 - 8-Bit Ultra-Low-Power MCU, 64KB Flash | STMicroelectronics
STM8L152R8T6 ✓ AktifPengandingan Spesifikasi
| Parametr | STM8L162M8T6 | STM8L152R8T6 |
|---|---|---|
| Merek | STMicroelectronics | STMicroelectronics |
| Kategori | Microcontrollers | Microcontrollers |
| Status Lingkungan Hidup | Aktif | Aktif |
| Core | STM8 8-bit CISC | STM8 8-bit CISC |
| Frekuensi Klock Maksimum | 16 MHz | — |
| Program Memory Size | 64 KB (64K x 8) Flash | — |
| RAM Size | 4 KB (4K x 8) | 4 KB |
| Data EEPROM Size | 2 KB | — |
| Number of I/O Pins | 68 | 54 |
| Kemasan / Case | 80-LQFP (14x14 mm) | — |
| Supply Voltage Range | 1.8 V to 3.6 V | — |
| Gambaran Suhu Operasi | -40°C to +85°C | — |
| ADC Resolution | 12-bit | — |
| Number of ADC Channels | 28 | — |
| DAC Resolution | 12-bit | — |
| Communication Interfaces | USART, SPI, I2C | — |
| LCD Driver | 8x40 segments | Up to 8x40 segments |
| Low-Power Modes | Wait, Low-power Run, Low-power Wait, Active-halt, Halt | Wait, Low-power Run, Low-power Wait, Active-halt, Halt |
| Halt Mode Current | 0.3 µA (typ) | — |
| Jenis Pemasangan | Surface Mount | — |
| Status RoHS | Compliant | Compliant |
| Maximum Frequency | — | 16 MHz |
| Flash Memory | — | 64 KB (64K x 8) |
| Data EEPROM | — | 2 KB |
| Tegangan Pemberi Arus | — | 1.8 V to 3.6 V |
| Suhu Operasi | — | -40°C to 125°C |
| Kemasan | — | 64-LQFP (10x10 mm) |
| ADC | — | 12-bit, up to 28 channels |
| DAC | — | 12-bit, 1 channel |
| Comparators | — | 2 |
| Timers | — | 5 (including 2x 16-bit, 1x 8-bit, 1x RTC, 1x watchdog) |
| Interfaces | — | USART, I2C, SPI |
| Halt Mode Current (with RTC) | — | 3.4 µA typical |
| Halt Mode Current (without RTC) | — | 0.35 µA typical |
| Maximum Power Dissipation | — | 288 mW |