VNQ500PEPTR-E vs VNI4140K-32 Pengandingan
Pengandingan Sisi Kiri Sisi Kanan Terperinci VNQ500PEPTR-E disebabkan oleh STMicroelectronics dan VNI4140K-32 disebabkan oleh STMicroelectronics. Bandingkan spesifikasi utama, parameter elektrik, pakej, status kehidupan, harga, dan keupayaan untuk menentukan komponen terbaik untuk keperluan disenjaya anda.
STMicroelectronics
VNQ500PEPTR-E - 4-Ch High-Side 36V Driver | STMicroelectronics
VNQ500PEPTR-E ✓ AktifSTMicroelectronics
VNI4140K-32 - Quad High-Side Smart Power SSR 1A PowerSSO-24 | STMicroelectronics
VNI4140K-32 ✓ AktifPengandingan Spesifikasi
| Parametr | VNQ500PEPTR-E | VNI4140K-32 |
|---|---|---|
| Merek | STMicroelectronics | STMicroelectronics |
| Kategori | Power MOSFET Drivers | Power MOSFET Drivers |
| Status Lingkungan Hidup | Aktif | Aktif |
| Tetstruktur | Quad High-Side Power Switch / Driver | High-side switch (N-channel MOSFET) |
| Bilangan Output | 4 | 4 |
| Gambaran Tegangan Masukan | 5.5 V to 36 V | — |
| Continuous Output Current (per channel) | 400 mA | — |
| On-Resistance (Ron, typ.) | 0.5 ohm | — |
| Konfigurasi Output | 1:1 N-Channel high-side | 1:1 N-Channel |
| Load Type | Any load with one side connected to ground | — |
| Logic Input Compatibility | CMOS/TTL | CMOS/TTL compatible logic inputs |
| Protection Features | Current limit, thermal shutdown, ESD | — |
| Operating Temperature (Tj) | -40C to +150C | — |
| Jenis Pemasangan | Surface Mount | Surface Mount |
| Kemasan | PowerSSO-12 (PowerLSOP with exposed pad) | PowerSSO-24 (24-pin with exposed thermal pad) |
| Automotive Qualification | AEC-Q100 qualified | — |
| Technology | ST VIPower M0-3 | ST VIPower (vertical DMOS + CMOS/bipolar control) |
| Status RoHS | Compliant | — |
| Device Type | — | Quad high-side smart power solid-state relay |
| Number of Channels | — | 4 |
| Load Current per Channel | — | 1.0 A (continuous) |
| On-State Resistance (RDS(on)) | — | 0.08 ohm per channel |
| Supply Voltage (VCC) Max | — | 41 V |
| Diagnostics | — | Per-channel open-load, short-to-ground, thermal fault |
| Inductive Load Handling | — | Fast demagnetization (integrated) |
| Package Width | — | 7.50 mm (approximately 0.295 inch) |
| Industrial Standard Compliance | — | IEC 61131-2 |
| ESD Rating | — | 25 kV (per IEC standard, air discharge) |