AD534JDZ - Precision 4-Quadrant Multiplier | Analog Devices
MPN: AD534JDZ ✓ AktifAD534JDZ Ringkasan
An analog multiplier is an integrated circuit that computes the product of two voltage signals. When one input is held at a constant reference, the same circuit can also perform division, reciprocal calculation, gain control, and voltage scaling. In the AD534, an on-chip buried Zener reference and laser trimming establish an overall scale factor of 10 V. The difference between the XY/SF and Z signals is then applied to the high-gain output amplifier, allowing the product or division result to be referenced accurately to the internal reference.
The AD534 family supports four-quadrant operation, meaning multiplication can handle input signals that change polarity rather than being limited to one positive and one negative quadrant. This makes the device useful in analog signal-processing systems where both polarities carry information. Its built-in voltage-division and reciprocal operations reduce the number of external arithmetic networks required for control, instrumentation, and feedback calculations.
Programming the gain and scale factor allows a system designer to adapt the AD534 to different signal ranges. In an analog-computer or control loop, the multiplier can combine a command variable with a feedback variable. In measurement systems, it can provide analog scaling between sensor outputs and downstream converter inputs. The internal reference also reduces the need for an external precision reference when the circuit operates around the AD534's calibrated scale factor.
The AD534JDZ is offered in a 14-pin CDIP package for through-hole industrial and instrumentation assemblies. Analog Devices describes the family as internally trimmed precision IC multiplier/divider technology, using laser trimming to achieve stable scale-factor performance. The device is intended for analog computation, control, feedback, signal-processing, and precision instrumentation circuits rather than high-speed digital conversion.
When designing around the AD534JDZ, check the complete pin description, recommended input and output ranges, bandwidth, scale-factor error, and supply limits in the Analog Devices AD534 datasheet. Resistor and trim networks should be arranged to minimize parasitic resistance and thermal gradients because multiplier accuracy depends on matched scaling paths and stable references. Stable bypass and grounding practices are also important when the output drives sensitive measurement or control circuitry.
This page consolidates the exact AD534JDZ package, production status, functional characteristics, verified RoHS and lead-free information, drop-in candidates, application guidance, and engineering comparison notes. It is designed to help engineers identify the correct multiplier, understand its four-quadrant operation, and plan a compatible replacement before placing an order through the XAIPART Request a Quote form.
Pilihan pengganti yang segera untuk AD534JDZ — sama paket, pin-pin kompatibel. Bahagian paket yang berbeza memerlukan kerja ulang PCB diasingkan.
Varietas dalam siri ini
Model serupa yang kompatibel dengan pengganti yang segera AD534JDZ (sama faktor bentuk dan kaki) — berbeza dalam Product Type, Package, Package Body Width, Trim Method.
AD534JD
✅ Masuk Drop-InHubungi untuk harga
Lihat Datasheet →AD534KDZ
✅ Masuk Drop-In ⚠️ Spesifikasi Tidak DisahkanHubungi untuk harga
Lihat Datasheet →AD534LDZ
✅ Masuk Drop-In ⚠️ Spesifikasi Tidak DisahkanHubungi untuk harga
Lihat Datasheet →AD534KD
✅ Masuk Drop-In ⚠️ Spesifikasi Tidak Disahkan📋 Alternatif rujukan (tidak dalam katalog)
AD534LD
✅ Masuk Drop-In ⚠️ Spesifikasi Tidak DisahkanHubungi untuk harga
Lihat Datasheet →AD534JDZ Penilaian maksimum & Ciri-ciri Elektrik
| Product Type | Precision IC multiplier/divider |
| Multiplier Function | 4-quadrant analog multiplication |
| Division Function | Analog voltage division |
| Reciprocal Operation | Built-in reciprocal function |
| Gain and Scale Factor | Programmable |
| Internal Reference | On-chip buried Zener reference |
| Overall Scale Factor | 10 V |
| Trim Method | Laser trimmed |
| Construction | Monolithic |
| Kemasan | 14-pin CDIP |
| Production Status | Production |
| Status RoHS | Compliant |
| Lead-Free Status | Lead-free |
Panduan Konfigurasi Pin AD534JDZ 14-pin cdip
Konfigurasi pin untuk AD534JDZ (14-pin cdip pakai). Komponen analog ini mempunyai pin masukan, keluaran, dan kuasa. Rujuk dokumen pengeluar untuk konfigurasi pengecualian, pemulihan, dan pin aktifkan. Ideal untuk pengawasan isyarat dan litar pengukur.
Tiada data garisan pin yang diperoleh untuk AD534JDZ.
Rujuk kepada lembaran data untuk konfigurasi pin penuh.
Aplikasi Biasa
AD534JDZ patut untuk 6 aplikasis: Analog Control Loops, Precision Instrumentation, Analog Computer Systems, Feedback and Error Calculations, Signal Scaling and Conditioning, Factory Automation and Process Control.
Analog Control Loops
The AD534JDZ is well suited to analog control-loop implementations because it combines four-quadrant multiplication with programmable gain and scale factor. It can form the product of a command variable and a feedback variable, allowing positive or negative signal polarities to participate in the calculation. The monolithic, laser-trimmed construction provides a more repeatable scale factor than a discrete multiplier made from ordinary resistors. Designers should still verify input range, output swing, and loop bandwidth from the AD534 datasheet, and they should minimize temperature gradients across the multiplier network to preserve calibration accuracy.
Disebarkan
Precision Instrumentation
For instrumentation, the AD534JDZ can scale sensor-derived voltages and perform calibrated analog arithmetic without a separate multiplier IC and precision reference. Its on-chip buried Zener reference establishes the device scale factor, while laser trimming supports repeatable behavior across the monolithic circuit. This is useful when a measurement path needs gain adjustment, signal inversion, or division before conversion by a downstream data-acquisition device. The design must keep input signals inside the specified range, observe the 10 V scale-factor reference, and provide stable supply bypassing to avoid adding error to the measured quantity.
Disebarkan
Analog Computer Systems
The AD534JDZ provides the multiply-and-scale primitive required by analog-computer equations. Programmable gain and scale factor allow a system architect to adapt the multiplier to different variable ranges, while built-in division and reciprocal functions extend the calculations that can be implemented without a separate arithmetic block. Four-quadrant behavior is valuable for equations that naturally include sign reversal. Because the AD534 is a precision analog device, practical implementations should maintain clean ground returns, minimize parasitic resistance, and recalibrate across the intended temperature range rather than assuming perfect coefficient matching.
Disebarkan
Feedback and Error Calculations
The AD534JDZ can calculate a product or ratio inside an analog feedback path, reducing the need for discrete analog computational stages. A four-quadrant multiplier can represent relationships where the feedback coefficient changes sign, while the programmable scale factor simplifies adaptation to different plant variables. The internal buried Zener reference and laser trimming provide the basis for stable arithmetic. Engineers should account for the device's finite bandwidth and output-drive capability when setting loop compensation, and they should verify that all multiplied signals remain within the manufacturer's recommended input range.
Disebarkan
Signal Scaling and Conditioning
The AD534JDZ can act as a precision scaling and conditioning element when one input represents a fixed reference and the other carries a variable waveform. With the reference established internally, the output follows a calibrated product relationship rather than a passive divider that drifts with temperature and component tolerance. Its four-quadrant operation supports both polarities of the variable signal, and reciprocal operation adds another scaling mode. Layout should use short, guarded signal paths, clean grounding, and supply bypassing close to the device so that layout-related noise does not degrade precision measurement or control performance.
Disebarkan
Factory Automation and Process Control
Industrial process-control systems often need to combine setpoint and feedback voltages before applying a correction, and the AD534JDZ provides that operation in one monolithic IC. Its four-quadrant multiplication handles polarity changes, while programmable gain and scale factor make it easier to normalize inputs from different sensors or actuator ranges. The production status and 14-pin CDIP package support established through-hole industrial designs. For reliable factory equipment, engineers should verify the exact temperature grade, supply limits, and calibration-drift specifications, then isolate sensitive analog grounds from high-current actuator returns.
Disebarkan
Ringkasan Produk Disebarkan
Data referensi kejuruteraan untuk AD534JDZ — perbandingan, panduan rancangan, dan maklumat kesediaan
Panduan Pilihan
Perbandingan dengan Gantian
| Parametr | Produk Ini | AD534JD | AD534KDZ | AD534LDZ | AD534KD | AD534LD |
|---|---|---|---|---|---|---|
| Package | 14-pin CDIP | 14-pin CDIP | 14-pin CDIP | 14-pin CDIP | 14-pin CDIP | 14-pin CDIP |
| Brand | Analog Devices | Analog Devices | Analog Devices | Analog Devices | Analog Devices | Analog Devices |
| Product Type | Precision IC multiplier/divider | Precision IC multiplier/divider | Precision IC multiplier/divider | Precision IC multiplier/divider | Precision IC multiplier/divider | Precision IC multiplier/divider |
Penyeberangsung Jelas
- RoHS-compliant and lead-free ordering option (vsAD534JD)
- Four-quadrant multiplication with built-in reference (vsAD534KDZ)
- Integrated arithmetic reduces external components (vsAD534LDZ)
- Production status supports ongoing industrial sourcing (vsAD534KD)
Catatan Desain
Use the complete Analog Devices AD534 datasheet when laying out the 14-pin CDIP footprint. Place bypass capacitors close to the supply and ground pins, keep multiplier input traces short, and route high-impedance feedback paths away from switching nodes. Because the multiplier uses matched internal scaling paths, unnecessary board-level resistance or asymmetry can increase error even when the integrated circuit itself is well trimmed.
Do not treat the internal 10 V scale factor as permission to apply arbitrary signal levels. Check the minimum and maximum XY, SF, Z, input, and output values in the AD534 electrical-characteristics table. Keep the output within its rated swing and respect the recommended operating and absolute-maximum limits. Also verify that a proposed AD534 suffix has the same pinout, package, accuracy grade, and temperature range as AD534JDZ.
Separate precision analog signal routing from noisy power and relay paths, and use a quiet ground reference for the multiplier inputs and output. If the circuit performs division or reciprocal calculations, avoid long, high-impedance branches near the scaling nodes because leakage and temperature gradients can alter the effective coefficient. Stable reference and supply bypassing are particularly important when the output drives a high-precision measurement chain.
Bandwidth and settling behavior must be checked against the intended feedback or measurement-loop speed. The four-quadrant and programmable features do not remove the analog system's finite bandwidth, output-drive, and noise limitations. For closed-loop use, characterize the complete multiplier-plus-amplifier path rather than assuming ideal instantaneous multiplication, and include worst-case signal polarity when sizing loop compensation.
Maklumat Kesediaan
The AD534JDZ is identified as a RoHS-compliant, lead-free counterpart of the AD534JD. No explicit REACH, halogen-free, conflict-minerals, or automotive-grade qualification statement is available for this ordering code.