Analog Devices

AD6121ARS - 3V CDMA Receiver IF Subsystem | Analog Devices

MPN: AD6121ARS ✓ Aktif
2.9 V to 4.2 V Vdss SSOP Package 50 MHz to 350 MHz Speed
MOQ: 1 |

AD6121ARS Ringkasan

The Analog Devices AD6121ARS is a low-power receiver IF subsystem designed for CDMA applications, with operation from a 2.9 V to 4.2 V battery supply and integration in a 28-lead SSOP package. It combines a high-dynamic-range IF amplifier with voltage-controlled gain, a divide-by-two quadrature generator, an I/Q demodulator, and a power-down control input. The receive chain supports IF signals from 50 MHz to 350 MHz.

A receiver IF subsystem is an integrated analog signal-processing block that performs amplification, gain adjustment, quadrature generation, and demodulation between an RF downconverter and subsequent digital processing. In the broader hierarchy, it belongs to receiver integrated circuits, analog signal-processing ICs, and communication semiconductors. Combining these functions can reduce external component count, simplify board layout, and shorten the low-level analog signal path in compact wireless receiver designs.

The AD6121ARS provides a linear IF amplifier with a noise figure of 5.9 dB and approximately 47 dB of linear-in-dB gain control. Voltage-controlled gain is important in cellular receivers because received signal strength can vary widely with distance, interference, and fading. Adjustable gain lets the receiver chain preserve usable signal level before conversion to baseband without relying on a collection of discrete amplifiers and attenuators.

The internal divide-by-two quadrature generator produces quadrature signals from the IF input, while the integrated I/Q demodulator translates the amplified IF signal into separate in-phase and quadrature baseband outputs. This arrangement supports direct conversion of a CDMA-compatible intermediate-frequency signal and reduces the external analog circuitry needed to implement a complete receive path. The device also includes an integrated low-dropout regulator and an active power-down control input.

Typical applications include CDMA receiver front ends, cellular handsets, W-CDMA equipment, AMPS systems, and TACS equipment. Its 2.9 V to 4.2 V supply range aligns with battery-powered portable radio designs, while the integrated regulator helps establish a stable internal operating rail. The industrial temperature grade and 28-lead SSOP package make it suited to controlled commercial and industrial environments where a surface-mount package is acceptable.

When laying out a circuit around the AD6121ARS, keep the IF path compact, provide stable supply bypassing at the device pins, and follow the manufacturer's recommended decoupling and interface details in the product datasheet. The power-down pin should be driven with levels compatible with the internal supply so that shutdown sequencing remains predictable. RF and IF routing also requires controlled impedance and short return paths to limit pickup from adjacent digital and switching circuitry.

This page combines manufacturer-level feature information, packaging details, application guidance, and component-search data to support initial design decisions. Before layout release, confirm the complete electrical limits, pin descriptions, recommended application circuit, and test conditions in the official AD6121 documentation.

Pilihan pengganti yang segera untuk AD6121ARS — sama paket, pin-pin kompatibel. Bahagian paket yang berbeza memerlukan kerja ulang PCB diasingkan.

Tiada pilihan pengganti yang segera untuk produk ini.

Minta Alternatif

AD6121ARS Spesifikasi

Product Type Receiver IF subsystem
Supply Voltage Range 2.9 V to 4.2 V
Nominal Supply Voltage 3 V
IF Input Frequency Range 50 MHz to 350 MHz
IF Amplifier Noise Figure 5.9 dB
IF Amplifier Gain Control Approximately 47 dB, linear in dB
Gain Control Type Voltage controlled
Integrated Functions IF amplifier, quadrature generator, I/Q demodulator, LDO regulator, and power-down control
Process Technology BiCMOS
Number of Terminals 28
Package Type SSOP
Package Shape Rectangular
Terminal Form Gull wing
Temperature Grade Industrial
Jenis Pemasangan Surface mount

Panduan Konfigurasi Pin AD6121ARS rectangular

Konfigurasi pin untuk AD6121ARS (rectangular pakai). Penomeran pin, fungsi, dan garis bentuk koneksi ditakrifkan dalam dokumen pengeluar. Rujuk dokumen untuk kebentuk dan pedoman pengasman.

Garis bentuk pengecah pakai rectangular untuk AD6121ARS

Tiada data garisan pin yang diperoleh untuk AD6121ARS.

Rujuk kepada lembaran data untuk konfigurasi pin penuh.

Aplikasi Biasa

AD6121ARS patut untuk 6 aplikasis: CDMA Cellular Receiver Front End, Battery-Powered W-CDMA Terminal, IF Amplification and Gain-Control Stage, Direct I/Q Demodulation Receiver, AMPS and TACS Radio Receiver, Shared CDMA/W-CDMA Receive Architecture.

🌐

CDMA Cellular Receiver Front End

The AD6121ARS fits a CDMA receiver path where a low-noise IF stage must also provide adjustable gain and quadrature baseband generation. Its 5.9 dB noise figure and approximately 47 dB of voltage-controlled linear-in-dB gain place amplification directly after the receiver's downconversion stage. The 50 MHz to 350 MHz IF range accommodates the intermediate-frequency plan used in compact cellular equipment. Using the integrated divide-by-two quadrature generator and I/Q demodulator reduces the number of separate analog blocks between the IF input and subsequent baseband processing.

📱

Battery-Powered W-CDMA Terminal

The AD6121ARS is appropriate for battery-powered receiver electronics designed around a 3 V nominal supply. Its 2.9 V to 4.2 V operating range accommodates single-cell battery systems, while the integrated low-dropout regulator establishes the internal rail needed by the analog receive chain. The power-down control gives the host circuitry a way to reduce consumption when the receiver is not active. Designers should verify total supply current, startup behavior, and thermal performance under the required transmission and receive duty cycle.

📡

IF Amplification and Gain-Control Stage

Where received signal strength varies substantially, the AD6121ARS can serve as the integrated IF amplification and gain-control stage. Voltage-controlled gain of approximately 47 dB allows the receiver to adapt amplification while preserving a linear-in-dB control relationship. The 5.9 dB noise figure defines the device's noise contribution within that chain. Placing the amplifier ahead of the internal quadrature generator and I/Q demodulator maintains a consistent signal path and limits the number of external high-frequency signal components.

📶

Direct I/Q Demodulation Receiver

The AD6121ARS supports receiver architectures that require in-phase and quadrature baseband outputs from an IF carrier. Its internal divide-by-two quadrature generator operates from the amplified IF signal, and the I/Q demodulator performs the frequency translation. This integration is useful when reducing board area and keeping the analog IF path short. The usable IF plan must remain inside the 50 MHz to 350 MHz range, and external filtering, level matching, and converter interface requirements should be established from the official application guidance.

📻

AMPS and TACS Radio Receiver

The AD6121ARS can be evaluated for AMPS and TACS receiver signal chains because Analog Devices identifies those standards among its supported operating modes. The device accepts a 50 MHz to 350 MHz IF and combines low-noise amplification, adjustable gain, quadrature generation, and demodulation in one subsystem. This can simplify a receiver implementation compared with a collection of separate analog blocks. Compliance with a cellular standard depends on the complete radio design, including filtering, frequency planning, calibration, and system-level test results.

📡

Shared CDMA/W-CDMA Receive Architecture

The AD6121ARS is suitable as a shared analog receive front end in designs serving both CDMA and W-CDMA modes. Its high-dynamic-range IF amplifier, voltage-controlled gain, and integrated demodulation functions support a programmable receive chain that can adapt to different channel conditions. The nominal 3 V supply and 2.9 V to 4.2 V operating range suit portable equipment. Firmware and calibration strategy must coordinate the gain-control voltage with baseband measurements to maintain correct signal scaling across operating modes.

Ringkasan Produk Disebarkan

AD6121 CDMA receiver IF subsystem family Dipergunakan di: CDMA Cellular Receiver Front End, Battery-Powered W-CDMA Terminal, IF Amplification and Gain-Control Stage, Direct I/Q Demodulation Receiver, AMPS and TACS Radio Receiver, Shared CDMA/W-CDMA Receive Architecture
What is the AD6121ARS used for?
The AD6121ARS is a low-power receiver IF subsystem for CDMA equipment. According to the Analog Devices product page, it integrates a high-dynamic-range IF amplifier with voltage-controlled gain, a divide-by-two quadrature generator, an I/Q demodulator, a power-down input, and a low-dropout regulator. It is intended for CDMA receiver designs and can also support W-CDMA, AMPS, and TACS applications.
What is the operating voltage of AD6121ARS?
The AD6121ARS operates from a 2.9 V to 4.2 V supply, with a nominal supply voltage of 3 V. Analog Devices describes an integral low-dropout regulator that allows operation across this battery-voltage range. The power-down input provides a means to control operating state, while the integrated regulator produces a stabilized internal rail for the analog receive functions.
What IF frequency range does AD6121ARS support?
The AD6121ARS demodulates intermediate frequencies from 50 MHz to 350 MHz. This range places the device in the IF stage of a wireless receiver rather than at the original RF antenna input. The signal chain includes a linear IF amplifier, quadrature generation, and I/Q demodulation before the resulting baseband signals pass to subsequent receiver processing.
What are the noise figure and gain control of AD6121ARS?
The AD6121ARS IF amplifier has a 5.9 dB noise figure and approximately 47 dB of linear-in-dB gain control. The gain is adjusted through a voltage-control mechanism, allowing a receiver to accommodate changes in received signal strength. Analog Devices identifies the amplifier as linear and high dynamic range for CDMA receiver signal chains.
What package does the AD6121ARS use?
The AD6121ARS is offered in a 28-lead SSOP package with a rectangular body and gull-wing terminals. It is a surface-mount package intended for conventional PCB assembly. Use the Analog Devices pin-description table and land pattern when assigning component locations and routing PCB tracks.
Where can I download the AD6121ARS datasheet?
The official AD6121 product page is the primary source for AD6121ARS documentation and links to the manufacturer datasheet. It describes the receiver IF subsystem, its integrated regulator, voltage-controlled IF gain, quadrature generation, and demodulator functions. Start with the Analog Devices AD6121 page at https://www.analog.com/en/products/ad6121.html.
Where can I find the AD6121ARS pinout?
The AD6121ARS has 28 terminals in its SSOP package. The official Analog Devices AD6121 documentation should be used to identify each pin, including the IF inputs, gain-control connection, quadrature outputs, supply connections, regulator-related pins, and power-down input. Use the pin-description table in the manufacturer datasheet before assigning PCB nets.
Is the AD6121ARS suitable for CDMA receiver designs?
Yes, the AD6121ARS is specifically designed as a CDMA receiver IF subsystem. Its integrated blocks include a 5.9 dB noise-figure IF amplifier, approximately 47 dB of voltage-controlled linear-in-dB gain, a divide-by-two quadrature generator, and an I/Q demodulator. This integration suits cellular receiver signal chains operating from 50 MHz to 350 MHz IF.
What can replace the AD6121ARS?
A replacement should preserve the AD6121ARS pin configuration, 28-lead SSOP footprint, 2.9 V to 4.2 V supply operation, 50 MHz to 350 MHz IF range, gain-control behavior, and quadrature demodulator functions. No qualified drop-in substitute is identified for this exact orderable MPN. Request cross-reference support through the Request a Quote form on this page when validating an alternate design.
Is AD6121ARS the same as the AD6121 base device?
The AD6121 is the family designation, while AD6121ARS identifies the specific Analog Devices orderable configuration in a 28-terminal SSOP package. The two names do not by themselves establish a drop-in relationship because suffix options can affect package, temperature grade, or production configuration. Confirm the exact ordering code against the manufacturer datasheet and your PCB footprint.
When should I choose the AD6121ARS instead of a discrete IF receiver chain?
Choose the AD6121ARS when a design needs an integrated CDMA-oriented receive chain rather than separate IF amplifiers, gain-control elements, quadrature circuitry, and demodulators. It can shorten the analog signal path and reduce board-level component count while operating from a 2.9 V to 4.2 V battery supply. Discrete implementations remain preferable when the system requires architecture or specifications outside the AD6121 feature set.
Is AD6121ARS suitable for a battery-powered handset?
The AD6121ARS is suitable for battery-powered portable receiver designs because its specified supply range is 2.9 V to 4.2 V and it includes an integrated low-dropout regulator. Its power-down control also supports power-management strategies. Final suitability depends on current consumption, thermal conditions, and the complete system power architecture.
What are the key specifications engineers should know about AD6121ARS?
The principal AD6121ARS specifications are a 2.9 V to 4.2 V operating supply, a 50 MHz to 350 MHz IF range, 5.9 dB amplifier noise figure, and approximately 47 dB of voltage-controlled linear-in-dB gain. The device combines the IF amplifier, divide-by-two quadrature generator, I/Q demodulator, integrated LDO, and power-down control in a 28-lead SSOP package.
How does the AD6121ARS support W-CDMA, AMPS, and TACS systems?
The AD6121ARS provides a configurable IF amplification and demodulation chain rather than a CDMA-only digital decoder. Analog Devices lists compliance with IS-98A and PCS specifications and identifies CDMA, W-CDMA, AMPS, and TACS operation among its supported receiver modes. Protocol-specific system validation remains necessary for each product design.
Where can I buy AD6121ARS online?
Use the Request a Quote form on this page to request AD6121ARS availability, current pricing, and lead time for the exact 28-lead SSOP configuration. The form avoids stale pricing or inventory assumptions and lets you specify the required quantities and packaging. Do not rely on a generic component-search listing when the suffix, package, and delivery requirements must be confirmed.
What is the lead time and stock status for AD6121ARS?
Request current AD6121ARS stock, minimum order quantity, and lead time through the Request a Quote form on this page. Availability can vary with the exact package suffix, manufacturing status, and order volume, so confirm the required configuration before committing a production schedule. The manufacturer product page remains the authoritative source for product information.

Data referensi kejuruteraan untuk AD6121ARS — perbandingan, panduan rancangan, dan maklumat kesediaan

Panduan Pilihan

Choose the AD6121ARS when designing a CDMA-oriented receiver that needs integrated IF amplification, voltage-controlled gain, quadrature generation, and I/Q demodulation in a 2.9 V to 4.2 V supply environment. Its 50 MHz to 350 MHz IF range, 5.9 dB noise figure, and approximately 47 dB of linear-in-dB gain make it most relevant to cellular receiver signal chains. A discrete or mixed-signal approach is more appropriate when the IF frequency, gain-control range, quadrature architecture, supply voltage, or signal-chain flexibility falls outside the AD6121 feature set. No qualified drop-in substitute was established for the exact AD6121ARS ordering code, so a replacement should be treated as a redesign unless its manufacturer explicitly confirms pin-for-pin compatibility.

Perbandingan dengan Gantian

Parametr Produk Ini
Product Type Receiver IF subsystem
Brand Analog Devices
Package 28-lead SSOP
Supply Voltage Range 2.9 V to 4.2 V
Nominal Supply Voltage 3 V
IF Frequency Range 50 MHz to 350 MHz
IF Amplifier Noise Figure 5.9 dB
Gain Control Approximately 47 dB, linear in dB, voltage controlled
Integrated Functions IF amplifier, quadrature generator, I/Q demodulator, LDO, and power-down control
Process Technology BiCMOS

Penyeberangsung Jelas

  • Integrates the complete receiver IF subsystem (vsDiscrete IF amplification and demodulation chain)
  • Supports a broad IF frequency range (vsSingle-frequency IF amplifier implementation)
  • Designed for low-voltage portable receivers (vsHigher-voltage discrete receiver implementation)

Catatan Desain

Keep the IF route from the upstream downconverter to the AD6121ARS short and controlled. Place input- and output-side bypass capacitors at their associated device pins and maintain a continuous ground reference beneath the signal path. Use the manufacturer's recommended application circuit and land pattern rather than estimating the SSOP geometry, because high-frequency routing and return-path discontinuities can degrade the receiver's noise performance.

Design the supply network for a nominal 3 V source while operating across the specified 2.9 V to 4.2 V range. The AD6121ARS contains a low-dropout regulator, but local decoupling remains necessary to control supply impedance between the battery or power-management circuit and the device. Confirm startup sequencing, the allowable voltage on the power-down control, and supply current in each operating state using the official electrical characteristics.

Do not treat the 28-lead SSOP package of the AD6121ARS as interchangeable with a similarly named ADI component without checking every terminal. The family includes receiver functions that are easy to misidentify as a simple amplifier. Verify the IF inputs, gain-control connection, quadrature outputs, regulator connections, and power-down terminal in the manufacturer pin table, and confirm that the selected ordering code uses the same 28-terminal footprint.

Maklumat Kesediaan

RoHS
Unknown
REACH
Unknown
AEC-Q100
Unknown
Bosong logam timbal
Unknown
Bosong halogen
Unknown
Mineral konflik
Unknown

The available product information identifies an industrial temperature grade and BiCMOS technology but does not state RoHS, REACH, AEC-Q100, lead-free, halogen-free, or conflict-minerals status.

Data disahkan pada: 2026-11-18 — data yang disahkan dan disusun semula oleh pasukan kejuruteraan komponen XAIPART

Pencarian Berhubungan

AD6121ARS datasheet AD6121ARS datasheet pdf AD6121ARS pinout AD6121ARS SSOP-28 Analog Devices AD6121ARS AD6121ARS CDMA receiver IF subsystem AD6121ARS equivalent AD6121ARS replacement AD6121ARS cross reference AD6121ARS 2.9V 4.2V AD6121ARS 50MHz 350MHz IF AD6121ARS price AD6121ARS stock AD6121ARS application circuit

Komponen dan Tanda berkaitan

Analog Devices AD6121ARS AD6121 receiver IF subsystem analog signal-processing IC communication semiconductor CDMA W-CDMA AMPS TACS IF amplifier voltage-controlled gain linear-in-dB gain control noise figure quadrature generator I/Q demodulator low-dropout regulator power-down control BiCMOS SSOP-28 surface mount battery-powered receiver IS-98A PCS specifications 50 MHz to 350 MHz IF
RFRC Saring Pantas
Isikan butiran lengkap — pasukan jualan kami akan bertindak balas dalam masa 24 jam
Nombor Bahagian Pengeluar Pakej QTY Harga Target Lengkap
✓
Pesan diskon sudah disubmit!

Kami akan bertindak balas kepada emel anda dalam tempoh 24 jam

1
RFQ Diserahkan
2
kutipan Diterima
3
Order Dipesan
4
Pembayaran
5
Dihantar
6
Diantar
Lihat Perincian RFQ