AD9826KRS - 16-Bit 15 MSPS CCD Signal Processor | Analog Devices
MPN: AD9826KRS ✗ Akhir HayatAD9826KRS Ringkasan
An imaging signal processor, or ISP, is an analog front end that conditions pixel waveforms before conversion into digital image data. It belongs to the ADC/DAC and sensor-interface hierarchy, combining correlated double sampling, programmable gain, offset control, and analog-to-digital conversion in one integrated device. This integration reduces the number of external signal-conditioning components required between a CCD or CMOS image sensor and the subsequent digital processing chain.
The AD9826KRS provides 16-bit conversion resolution at up to 15 MSPS in three-channel operation. Its programmable gain spans 1 to 6, and its programmable offset range reaches 300 mV. These controls allow the analog front end to normalize signal amplitude and pedestal level before digitization. The three-channel architecture is particularly suitable for RGB imaging systems because separate channels can process the red, green, and blue outputs of a trilinear CCD array.
Internally, the signal path uses a clamp and correlated double sampler to reject reset and coupling effects commonly found in CCD pixel outputs. An offset DAC establishes the sampling reference level, while the PGA adjusts gain according to illumination and sensor conditions. The conditioned channels are multiplexed into the 16-bit ADC, creating a compact solution for scanners, cameras, and other imaging systems rather than requiring separate amplifiers, subtractors, gain stages, and converters.
Typical uses include flatbed and sheet-fed scanners, color CCD imaging systems, monochrome document scanners, industrial vision equipment, and specialized optical measurement systems. Three-channel operation supports color CCD outputs, while the two-channel odd/even mode addresses monochrome sensors. The single-channel mode can be useful when only one analog output requires digitization, although its 12.5 MSPS rate is lower than the three-channel maximum.
PCB design should preserve short, well-controlled analog paths from the sensor inputs to the corresponding channel inputs and isolate the digital interface from sensitive pixel signals. Decoupling, grounding, and clock-signal integrity are especially important because high-resolution imaging systems amplify small differences between pixel reference and video levels. Consult the pin-description table in the Analog Devices AD9826 Data Sheet, Revision B, before assigning tracks or connecting unused pins.
This product record combines the verified architecture, package, operating modes, and application requirements with a strict assessment of replacement options. It also identifies where the manufacturer documentation must be consulted for electrical limits, full pin assignments, clocking details, and PCB implementation constraints.
Pilihan pengganti yang segera untuk AD9826KRS — sama paket, pin-pin kompatibel. Bahagian paket yang berbeza memerlukan kerja ulang PCB diasingkan.
Tiada pilihan pengganti yang segera untuk produk ini.
Minta AlternatifAD9826KRS Penilaian maksimum & Ciri-ciri Elektrik
| ADC Resolution | 16 bit |
| Maximum Conversion Rate | 15 MSPS |
| Channel Architecture | 3 analog input channels |
| Three-Channel Operation Rate | 15 MSPS |
| Single-Channel Operation Rate | 12.5 MSPS |
| Programmable Gain Range | 1 to 6 |
| Programmable Offset Range | 300 mV |
| Signal Conditioning | Input clamp, CDS, offset DAC, and PGA per channel |
| Input Signal Type | Trilinear color CCD array outputs |
| Monochrome Sensor Mode | 2 channels for odd/even outputs |
| Kemasan | 28-pin SSOP |
| Jenis Pemasangan | Surface mount |
| Product Lifecycle | Not recommended for new designs |
| Data Sheet Revision | Rev. B |
Panduan Konfigurasi Pin AD9826KRS 28-pin ssop
Konfigurasi pin untuk AD9826KRS (28-pin ssop pakai). Komponen analog ini mempunyai pin masukan, keluaran, dan kuasa. Rujuk dokumen pengeluar untuk konfigurasi pengecualian, pemulihan, dan pin aktifkan. Ideal untuk pengawasan isyarat dan litar pengukur.
Tiada data garisan pin yang diperoleh untuk AD9826KRS.
Rujuk kepada lembaran data untuk konfigurasi pin penuh.
Aplikasi Biasa
AD9826KRS patut untuk 6 aplikasis: Flatbed Color Scanner, Color CCD Camera, Monochrome Document Scanner, Industrial Vision Inspection, Optical Measurement Instrument, Legacy Imaging System Maintenance.
Flatbed Color Scanner
The AD9826KRS is well suited to a flatbed scanner that reads red, green, and blue outputs from a trilinear CCD array. Its three-channel architecture accepts those sensor outputs and conditions each path with a clamp, correlated double sampler, offset DAC, and programmable gain amplifier before conversion. At up to 15 MSPS with 16-bit resolution, the device supports detailed optical digitization while reducing the external analog circuitry between the CCD and digital processing. The programmable 1-to-6 gain range and 300 mV offset range help normalize different channel levels and illumination conditions. System timing and the sensor's pixel clock must still be coordinated with the ADC conversion sequence.
Disebarkan
Color CCD Camera
A compact color CCD camera can use the AD9826KRS as the interface between its trilinear RGB sensor and digital image processor. Each analog channel receives an independent correlated double sampling stage, allowing reset-level effects to be removed before digitization. The 16-bit ADC provides 65,536 code levels, while gain adjustment from 1 to 6 and offset control up to 300 mV support exposure and channel-balancing adjustments. The integrated processor reduces board area compared with a discrete CDS, PGA, offset, and ADC chain. Because the AD9826 is not recommended for new designs, a new camera platform should obtain lifecycle confirmation or consider a currently supported imaging processor before committing to it.
Disebarkan
Monochrome Document Scanner
The AD9826KRS can digitize a monochrome CCD sensor through its two-channel mode for sensors with odd/even outputs. This arrangement preserves separate processing paths for the two sensor lines while avoiding the need for three complete analog channels. Alternatively, one-channel operation supports a single output at up to 12.5 MSPS, which can simplify a lower-channel scanner architecture. The correlated double sampler rejects reset-level differences before the offset and gain stages, improving consistency across individual pixels. The clock rate must remain compatible with the scanner's line timing, and the system should validate illumination, analog input range, and data-capture latency across a full scan.
Disebarkan
Industrial Vision Inspection
Industrial inspection systems can place the AD9826KRS between a linear or area CCD sensor and the machine-vision processing electronics. Its 16-bit resolution preserves fine differences in small features, while programmable gain and offset permit adaptation to changing surface reflectance and optical contrast. Correlated double sampling helps reject pixel reset noise, making the analog front end suitable for repeated scans of precise patterns or measurement targets. The integrated three-channel architecture also supports color-coded inspection when separate RGB sensor outputs are available. The design must provide controlled grounding and short analog routing, and it should compare conversion latency against the sensor frame timing before selecting the operating mode.
Disebarkan
Optical Measurement Instrument
The AD9826KRS can serve as the imaging front end in precision optical measurement equipment that records low-level spatial patterns. Its 16-bit ADC offers fine amplitude resolution, and the per-channel PGA and offset DAC allow the system to adapt to differences in detector illumination. When a trilinear sensor supplies three outputs, the device conditions all channels before multiplexing them into the converter. This consolidation can lower analog-board complexity and help maintain repeatable measurements. The instrument designer should verify sensor output amplitude against the allowed analog range, account for clock and conversion latency, and characterize calibration drift across the intended temperature range using the manufacturer's complete electrical specifications.
Disebarkan
Legacy Imaging System Maintenance
The AD9826KRS is best considered for maintaining an established imaging system whose sensor timing, analog network, and PCB footprint already match this processor. Its three-channel CCD architecture and 16-bit, 15 MSPS conversion capability preserve the original signal-chain behavior without requiring a board redesign. For repairs and production continuation, engineers should match the exact ordering suffix, verify the full pin assignment, and reproduce the original power, clock, and bypass-network layout. A new production program should request lifecycle and inventory confirmation through the Request a Quote form because the manufacturer identifies the AD9826 family as not recommended for new designs.
Disebarkan
Ringkasan Produk Disebarkan
Data referensi kejuruteraan untuk AD9826KRS — perbandingan, panduan rancangan, dan maklumat kesediaan
Panduan Pilihan
Perbandingan dengan Gantian
| Parametr | Produk Ini |
|---|---|
| Package | 28-pin SSOP |
| Brand | Analog Devices |
| ADC Resolution | 16 bit |
| Maximum Conversion Rate | 15 MSPS |
| Three-Channel Rate | 15 MSPS |
| Single-Channel Rate | 12.5 MSPS |
| Programmable Gain | 1 to 6 |
| Programmable Offset | 300 mV |
| Signal Processing | Input clamp, CDS, offset DAC, PGA, and 16-bit ADC |
| Lifecycle Guidance | Not recommended for new designs |
Penyeberangsung Jelas
- Three-channel CCD conditioning and conversion in one device (vsAD9822JR)
- Dedicated operating modes for color and monochrome sensors (vsAD9284)
- Programmable channel calibration (vsA1240LWQ)
Catatan Desain
Keep the three CCD input routes short, symmetrical, and away from the digital output traces. Route each sensor channel directly to its assigned AD9826 input with a continuous ground reference, and avoid sharing narrow analog paths that could create channel-to-channel skew. Place the device close to the CCD connector or sensor interface so that the correlated double sampler receives the pixel signal before coupling and switching noise accumulate. The manufacturer's pin-description table and recommended application circuit should govern the final trace geometry.
Follow the AD9826 Data Sheet, Revision B, for supply voltage, decoupling, and input-capacitor requirements. Place the specified bypass capacitors at the associated power pins, with the shortest possible return path to the device ground. Analog and digital return currents should not share a narrow path beneath the SSOP, because supply noise can appear as gain, offset, or image-fixed-pattern errors. If the sensor board and processor are separated, use a controlled ground connection and assess the analog supply with the converter and digital interface operating together.
Clock quality directly affects the pixel-timing margin of a CCD imaging chain. Route the conversion clock away from the CCD input pins and use a low-impedance source, with the signal integrity of the complete board considered across temperature and supply variation. Avoid adding long stubs or test-point branches to sensitive timing lines. Confirm setup and hold requirements, output delay, and allowable clock rates against the manufacturer data sheet before choosing the ADC operating mode.
Do not select an alternative based only on ADC resolution or sampling rate. A replacement must also reproduce the 28-pin SSOP footprint, CCD input arrangement, clock timing, control interface, power requirements, and programming model. AD9826 ordering-code variants are not automatically separate drop-in products, and related imaging processors may use different packages or registers. For an existing design, compare the manufacturer data sheets and verify every pin and timing parameter before substituting any component or changing its order suffix.
Maklumat Kesediaan
The verified product information does not state RoHS, REACH, lead-free, halogen-free, or conflict-minerals status. The AD9826 is an imaging signal processor rather than an automotive-qualified power semiconductor, so AEC-Q100 is marked not applicable.