Analog Devices

ADF4157BCPZ-RL7 - 6 GHz Fractional-N PLL | Analog Devices

MPN: ADF4157BCPZ-RL7 ✓ Aktif
3.3 V Vdss Programmable Id 20-lead LFCSP with exposed pad Package 6 GHz Speed
MOQ: 1 |

ADF4157BCPZ-RL7 Ringkasan

Analog Devices ADF4157BCPZ-RL7 is a high-resolution 6 GHz fractional-N frequency synthesizer with a 25-bit fixed modulus, programmable charge-pump current, and a 3.3 V power supply. The device is packaged in a 20-lead LFCSP with an exposed pad and supports a separate VP supply for extended tuning-voltage operation.

A fractional-N frequency synthesizer is a phase-locked-loop timing device that uses integer and fractional divider fields to synthesize precise output frequencies from a stable reference. Within the broader hierarchy, the ADF4157 is a PLL frequency synthesizer, a clock-and-timing IC, and ultimately a semiconductor designed for RF signal generation and clock generation. Its sigma-delta fractional interpolator supports programmable fractional division while preserving fine frequency resolution.

The principal features include RF bandwidth to 6 GHz, sub-hertz frequency resolution through the 25-bit fixed modulus, programmable reference division, programmable charge-pump currents, a three-wire serial interface, digital lock detection, and power-down operation. A separate VP connection permits the tuning-voltage supply to be raised above the primary supply when greater tuning range is required. The digital control path enables register-based setup of divider, fractional, reference, charge-pump, and operating-mode functions.

Technically, the ADF4157 combines a low-noise digital phase-frequency detector, precision charge pump, programmable reference divider, integer-N and fractional-N division stages, and a sigma-delta fractional interpolator. These blocks establish the zero-crossing reference, measure phase-frequency error, and drive the charge pump and loop-filter network. The external loop filter and voltage-controlled oscillator remain important parts of the complete synthesizer design, so achievable phase noise and lock performance depend on the full feedback loop rather than on the IC alone.

Typical uses include wireless transceiver local oscillators, RF test equipment, clock generation for data converters, microwave down-converters, instrumentation, and phase-coherent RF systems. It is especially useful when programmable fractional frequency synthesis, a 6 GHz operating ceiling, and flexible serial configuration are more important than a fully integrated VCO.

Design with the 20-lead LFCSP exposed pad as a thermal and electrical connection to ground, place decoupling close to the supply pins, and route the sensitive charge-pump and feedback paths away from noisy digital return currents. Confirm lock behavior, tuning range, spur levels, and loop stability with the actual reference, VCO, and filter values.

This page combines the device specifications, application guidance, verified cross-reference candidates, and practical design considerations needed to evaluate the ADF4157BCPZ-RL7 before it is incorporated into an RF or clock-generation design.

Pilihan pengganti yang segera untuk ADF4157BCPZ-RL7 — sama paket, pin-pin kompatibel. Bahagian paket yang berbeza memerlukan kerja ulang PCB diasingkan.

Varietas dalam siri ini

Model serupa yang kompatibel dengan pengganti yang segera ADF4157BCPZ-RL7 (sama faktor bentuk dan kaki) — berbeza dalam Package, Device Type, Charge Pump, Phase-Frequency Detector, Lock Detection.

Analog Devices
Package: 20-lead WFQFN exposed-pad CSP
Device Type: Clock/Frequency Synthesizer (RF) PLL
Charge Pump: Precision charge pump
Bandingkan Dengan ADF4157BCPZ-RL7 →
Analog Devices
Package: 20-pin LFCSP with exposed pad
Charge Pump: Programmable current
Phase-Frequency Detector: Low-noise digital PFD
Bandingkan Dengan ADF4157BCPZ-RL7 →
Analog Devices
Package: 20-WFQFN exposed-pad chip-scale package
Device Type: Fractional-N frequency synthesizer (RF) IC
Lock Detection: Digital
Bandingkan Dengan ADF4157BCPZ-RL7 →
Analog Devices
Package: LFCSP-20 (20-lead WFQFN with exposed pad, CSP)
Device Type: Fractional-N frequency synthesizer (PLL)
Charge Pump: Precision charge pump
Bandingkan Dengan ADF4157BCPZ-RL7 →

ADF4157BCPZ-RL

✅ Masuk Drop-In
📦 20-lead LFCSP with exposed pad
Same 6 GHz ADF4157 electrical device and 20-lead LFCSP footprint; ordering form differs in reel orientation, with frequency and modulus unchanged

📋 Alternatif rujukan (tidak dalam katalog)

ADF4157BCPZ-R2

✅ Masuk Drop-In
📦 20-lead LFCSP with exposed pad
Same 6 GHz and 25-bit fixed-modulus ADF4157 device; the R2 ordering form differs in reel orientation rather than core parameters

📋 Alternatif rujukan (tidak dalam katalog)

ADF4157BCPZ-REEL

✅ Masuk Drop-In
📦 20-lead LFCSP with exposed pad
Same 6 GHz and 25-bit fixed-modulus ADF4157 device in a related reel ordering form; core electrical parameters are unchanged

📋 Alternatif rujukan (tidak dalam katalog)

ADF4154BCP-REEL

✅ Masuk Drop-In
Analog Devices
📦 20-lead LFCSP with exposed pad
Fractional-N frequency synthesizer · 500 MHz to 4 GHz · 10 MHz to 4 GHz · 3.3 V · Programmable dual-modulus 4/5 or 8/9 · Programmable current · 3-wire serial interface · Digital lock detect

Hubungi untuk harga

Lihat Datasheet →

ADF41020BCPZ-RL7

✅ Masuk Drop-In
📦 20-lead LFCSP with exposed pad
Same 20-lead LFCSP package, but the ADF41020 family has a different fractional divider, register set, and maximum operating characteristics

📋 Alternatif rujukan (tidak dalam katalog)

ADF4108BCPZ-RL7

✅ Masuk Drop-In
Analog Devices
📦 20-lead LFCSP with exposed pad
Clock/Frequency Synthesizer (RF) PLL · 8 GHz · 1 · Up to 300 MHz · 6 bit · 13 bit · Dual-modulus P/P+1 · Low-noise digital PFD

Hubungi untuk harga

Lihat Datasheet →

ADF4157BCPZ-RL7 Spesifikasi

Product Type Fractional-N frequency synthesizer
Maximum RF Frequency 6 GHz
Fixed Modulus 25 bit
Frequency Resolution Sub-hertz at 6 GHz
Primary Supply Voltage 3.3 V
VP Supply Separate supply for extended tuning voltage
Reference Divider Programmable
Charge-Pump Current Programmable
Serial Interface 3-wire
Lock Detect Digital
Power-Down Mode Supported
Phase-Frequency Detector Low-noise digital
Fractional Divider Architecture Sigma-delta based fractional interpolator
Kemasan 20-lead LFCSP with exposed pad
Gambaran Suhu Operasi -40 °C to +85 °C
Jenis Pemasangan Surface mount

Panduan Konfigurasi Pin ADF4157BCPZ-RL7 20-lead lfcsp with exposed pad

Konfigurasi pin untuk ADF4157BCPZ-RL7 (20-lead lfcsp with exposed pad pakai). Penomeran pin, fungsi, dan garis bentuk koneksi ditakrifkan dalam dokumen pengeluar. Rujuk dokumen untuk kebentuk dan pedoman pengasman.

Garis bentuk pengecah pakai 20-lead lfcsp with exposed pad untuk ADF4157BCPZ-RL7

Tiada data garisan pin yang diperoleh untuk ADF4157BCPZ-RL7.

Rujuk kepada lembaran data untuk konfigurasi pin penuh.

Aplikasi Biasa

ADF4157BCPZ-RL7 patut untuk 6 aplikasis: Wireless Transceiver Local Oscillator, RF Test and Measurement Equipment, Microwave Down-Converter, Precision Clock Generation, Data Converter and RF Signal Chain, Industrial RF and Wireless Control.

🌐

Wireless Transceiver Local Oscillator

The ADF4157BCPZ-RL7 fits a programmable local-oscillator path for wireless transceivers operating up to 6 GHz because its 25-bit fixed modulus supports sub-hertz frequency resolution. The synthesizer can divide a stable reference, apply a programmed fractional value, and drive an external VCO through the charge pump and loop filter. This architecture is useful when channel spacing requires fine tuning beyond an integer divider alone. Designers must account for VCO tuning range, reference phase noise, charge-pump settings, and lock time rather than treating the 6 GHz IC specification as a complete synthesizer performance guarantee.

🔧

RF Test and Measurement Equipment

The ADF4157BCPZ-RL7 is suitable for programmable RF signal sources because it combines a 6 GHz RF bandwidth with sub-hertz frequency resolution from its 25-bit fixed modulus. A stable reference feeds the programmable reference divider, while the fractional and integer fields establish the desired synthesizer ratio. In an instrument, the three-wire serial interface simplifies register configuration and digital lock detection provides a usable acquisition status signal. The external VCO and loop-filter design still determine practical phase noise, spur performance, tuning speed, and output stability.

📡

Microwave Down-Converter

The ADF4157BCPZ-RL7 can generate the local oscillator for a microwave down-converter when the desired output falls within its 6 GHz operating bandwidth. Fractional division lets the designer obtain a finely resolved channel-related tuning step from a practical reference frequency. The device requires an external VCO, passive loop filter, and suitable RF output network, so tuning-voltage range and VCO phase noise must be matched to the converter specification. The separate VP connection is useful when the external VCO needs a tuning range beyond what the 3.3 V primary supply alone can provide.

🖥️

Precision Clock Generation

The ADF4157BCPZ-RL7 can serve as the fractional divider and phase detector in a clock-generation system using a reference oscillator and external VCO. Its 25-bit fixed modulus permits fine frequency increments, making it appropriate for instrumentation and communication clocks that require programmable tuning beyond a conventional integer-N divider. The three-wire control interface allows a controller to program the reference, feedback, integer, fractional, and charge-pump registers. Clock-quality evaluation must include phase noise, reference jitter, loop bandwidth, and jitter performance rather than relying only on the nominal frequency-resolution figure.

📺

Data Converter and RF Signal Chain

The ADF4157BCPZ-RL7 is applicable to coherent RF signal chains that require an accurately related local oscillator, including systems that clock converters or digital receivers. A common reference can support coherent synthesis across multiple channels, while the fractional divider permits fine frequency placement. The ADF4157 provides programmable reference and charge-pump currents so the loop can be adapted to different VCO characteristics. Spurious-signal behavior depends on the fractional interpolator settings, loop filter, VCO isolation, and PCB return-current control, requiring system-level evaluation rather than a datasheet-only assessment.

🏭

Industrial RF and Wireless Control

The ADF4157BCPZ-RL7 is useful in industrial RF equipment that needs software-programmable frequency generation without a separate synthesizer controller. Its digital lock detection and power-down mode support supervisory control, while the programmable divider and charge-pump registers permit adaptation to multiple external VCOs. The -40 °C to +85 °C operating range supports industrial temperature conditions. Design work should account for tolerance in the reference and loop components, startup sequencing of the 3.3 V and VP rails, exposed-pad thermal management, and isolation between sensitive RF feedback paths and digital control return currents.

What is the ADF4157BCPZ-RL7?
The ADF4157BCPZ-RL7 is a 6 GHz fractional-N frequency synthesizer from Analog Devices with a 25-bit fixed modulus. According to the manufacturer product page, it combines a low-noise digital phase-frequency detector, precision charge pump, programmable reference divider, and sigma-delta fractional interpolator. The device is supplied in a 20-lead LFCSP with an exposed pad for RF synthesis and clock-generation designs.
What is the operating frequency of the ADF4157BCPZ-RL7?
The ADF4157BCPZ-RL7 supports an RF operating bandwidth up to 6 GHz. According to the Analog Devices product page, its 25-bit fixed modulus allows sub-hertz frequency resolution at 6 GHz when the reference, divider settings, and loop-filter design are configured correctly. The maximum synthesizable output remains dependent on the external VCO and feedback arrangement.
Where can I download the ADF4157BCPZ-RL7 datasheet PDF?
The ADF4157BCPZ-RL7 datasheet and supporting documentation are available from the Analog Devices ADF4157 product page at https://www.analog.com/en/products/adf4157.html. The manufacturer identifies the associated data sheet as Revision D. Use the package pin-description table, register map, and application guidance from that document when laying out the PCB and configuring the device.
Where can I find the ADF4157BCPZ-RL7 pinout?
The ADF4157BCPZ-RL7 pin assignment is documented in the Analog Devices ADF4157 data sheet linked from the product page. The component uses a 20-lead LFCSP with an exposed pad, and the exposed pad must be connected according to the manufacturer layout recommendations. Use the data-sheet pin-description table for final track, pad, and thermal-via assignments.
What are the key specifications engineers should know about the ADF4157BCPZ-RL7?
The ADF4157BCPZ-RL7 combines a 6 GHz maximum RF bandwidth, 25-bit fixed modulus, 3.3 V main supply, and programmable charge-pump current. According to the Analog Devices product page, it also provides programmable reference division, a three-wire serial interface, digital lock detection, power-down mode, and a separate VP connection for extended tuning-voltage operation.
Where can I buy the ADF4157BCPZ-RL7 online?
The ADF4157BCPZ-RL7 can be requested through the Request a Quote form on this page. The form allows an engineer to specify the required quantity, delivery target, and packaging preference. Current commercial terms should be confirmed through that form rather than relying on an outdated listing or a generic family-level availability statement.
What is the price of the ADF4157BCPZ-RL7?
Current commercial pricing for the ADF4157BCPZ-RL7 should be requested through the Request a Quote form on this page. The quote request should identify the exact ADF4157BCPZ-RL7 orderable MPN, required quantity, and reel or other delivery requirements so that the response reflects the exact configuration rather than an ADF4157 family variant.
What is the lead time for the ADF4157BCPZ-RL7?
The current lead time and minimum order quantity for the ADF4157BCPZ-RL7 should be confirmed through the Request a Quote form on this page. Include the target quantity, required ship date, and shipment destination in the request. This is particularly important because the exact RL7 ordering suffix denotes a specific reel-packed configuration of the 20-lead device.
Is the ADF4157BCPZ-RL7 in stock?
Current stock status for the ADF4157BCPZ-RL7 should be checked through the Request a Quote form on this page. Request the exact MPN and intended quantity so the response can reflect available inventory and allocation for the required order configuration. The manufacturer lists the ADF4157 family as production, but that status alone does not guarantee immediate stock.
What can replace the ADF4157BCPZ-RL7?
The closest drop-in candidates must use the same 20-lead footprint and preserve the ADF4157 register and electrical behavior. ADF4157BCPZ-RL7, ADF4157BCPZ-REEL, and ADF4157BCPZ-R2 identify ordering or packaging forms of the same device, while ADF4154BCP-REEL is a related same-package synthesizer with different RF and fractional-N capabilities. Verify pin compatibility and register compatibility before substitution.
What is the best Analog Devices equivalent for the ADF4157BCPZ-RL7?
ADF4157BCPZ-RL7 is already an orderable Analog Devices configuration of the 6 GHz ADF4157 fractional-N synthesizer. ADF4157BCPZ-R2 and ADF4157BCPZ-REEL represent related ordering forms of that same family, so they are preferable when procurement rather than electrical redesign is the concern. Check the temperature grade, reel orientation, and exposed-pad handling on the production documentation.
ADF4157BCPZ-RL7 vs ADF4154BCP-REEL: which is better for RF synthesis?
Choose the ADF4157BCPZ-RL7 when sub-hertz resolution and a 25-bit fixed modulus are priorities, because those capabilities are explicitly identified for the ADF4157. The ADF4154BCP-REEL is a related 20-lead ADF synthesizer, but its maximum RF frequency and fractional divider implementation differ. Confirm the required output range, register map, lock behavior, and footprint against both data sheets.
When should I choose the ADF4157BCPZ-RL7 over ADF41020BCPZ-RL7?
Choose the ADF4157BCPZ-RL7 when the design needs its documented 25-bit fixed modulus and sub-hertz resolution capability at 6 GHz. ADF41020BCPZ-RL7 is a related ADF41020-family synthesizer, so its reference divider, fractional architecture, frequency range, and register implementation may be better aligned with a different local-oscillator plan. Compare the required output band, tuning voltage, phase noise, and lock-detection requirements.
Is the ADF4157BCPZ-RL7 suitable for wireless transmitter and receiver designs?
Yes, the ADF4157BCPZ-RL7 is suitable for many wireless and RF systems because it supports RF bandwidth to 6 GHz, programmable reference and charge-pump settings, and digital lock indication. It does not contain a VCO, so the selected external VCO, loop filter, reference, and feedback network must meet the required tuning range, phase-noise, spur, and lock-time objectives.
Does the ADF4157BCPZ-RL7 need a separate VP supply?
The ADF4157BCPZ-RL7 provides a separate VP connection for extended tuning-voltage operation while using a 3.3 V primary supply. According to the manufacturer feature summary, VP supports greater tuning range than the primary supply permits. The external VCO control-voltage limits, charge-pump settings, and loop-filter design must be coordinated so the tuning voltage remains within safe operating limits.

Data referensi kejuruteraan untuk ADF4157BCPZ-RL7 — perbandingan, panduan rancangan, dan maklumat kesediaan

Panduan Pilihan

Choose the ADF4157BCPZ-RL7 when a design requires a 6 GHz fractional-N synthesizer with a 25-bit fixed modulus, sub-hertz frequency resolution, programmable reference and charge-pump settings, and a three-wire control interface. ADF4157BCPZ-RL, ADF4157BCPZ-R2, and ADF4157BCPZ-REEL are preferable when procurement or reel-orientation requirements dominate and the core ADF4157 behavior is unchanged. Consider ADF4154BCP-REEL when its lower-frequency, smaller-modulus architecture meets the design and its register behavior is acceptable. Evaluate ADF41020BCPZ-RL7 or ADF4108BCPZ-RL7 only when their fractional divider, frequency range, and programming characteristics provide a better fit for the selected VCO and loop filter. Because every candidate uses a 20-lead LFCSP family package, confirm pin-level compatibility, register compatibility, exposed-pad layout, and production documentation before treating any alternative as a drop-in replacement.

Perbandingan dengan Gantian

Parametr Produk Ini ADF4157BCPZ-RL ADF4157BCPZ-R2 ADF4157BCPZ-REEL ADF4154BCP-REEL ADF41020BCPZ-RL7
Package 20-lead LFCSP with exposed pad 20-lead LFCSP with exposed pad 20-lead LFCSP with exposed pad 20-lead LFCSP with exposed pad 20-lead LFCSP with exposed pad 20-lead LFCSP with exposed pad
Brand Analog Devices Analog Devices Analog Devices Analog Devices Analog Devices Analog Devices
Product Type Fractional-N frequency synthesizer Fractional-N frequency synthesizer Fractional-N frequency synthesizer Fractional-N frequency synthesizer Fractional-N frequency synthesizer Fractional-N frequency synthesizer

Penyeberangsung Jelas

  • Higher fixed modulus within the compared ADF PLL options (vsADF4154BCP-REEL)
  • Direct orderable 6 GHz synthesizer configuration (vsADF41020BCPZ-RL7)
  • Flexible voltage control with separate VP connection (vsADF4157BCPZ-RL)

Catatan Desain

Use the exposed pad as both the device ground connection and the primary thermal path. Follow the Analog Devices land pattern and recommended via arrangement for the 20-lead LFCSP rather than treating the pad as optional. Place the supply decoupling capacitor close to the appropriate supply pin, keep the exposed-pad vias thermally capable of carrying ground current, and preserve a continuous return path beneath the device.

Keep the charge-pump output, loop-filter components, VCO control line, and PLL feedback traces short and isolated from serial-interface and digital return currents. Route the sensitive feedback path away from switching nodes and high-current return paths. Ground the loop-filter region carefully because parasitic inductance in the filter or charge-pump connections can change damping, introduce modulation, and degrade phase noise.

Plan the 3.3 V primary rail and separate VP rail so that the VP voltage remains compatible with the external VCO tuning range and the ADF4157 charge-pump configuration. Decouple both rails close to the device, observe the permitted sequencing conditions, and ensure that power-down behavior does not create an uncontrolled VCO tuning condition. Review absolute maximum limits and recommended operating conditions in the manufacturer data sheet.

Do not infer complete synthesizer performance from the 6 GHz maximum RF bandwidth or sub-hertz frequency resolution alone. Phase noise, fractional spurs, lock time, and tuning range depend on the reference source, reference divider, charge-pump setting, loop filter, VCO, and PCB. Evaluate those elements together, and verify the register sequence and divider ratios when changing between ADF4157 ordering variants.

Maklumat Kesediaan

RoHS
Unknown
REACH
Unknown
AEC-Q100
Not Applicable
Bosong logam timbal
Unknown
Bosong halogen
Unknown
Mineral konflik
Unknown

The Analog Devices product page identifies the ADF4157 as a production device, but explicit RoHS, REACH, lead-free, halogen-free, and conflict-minerals declarations were not present in the retrieved data.

Data disahkan pada: 2026-11-20 — data yang disahkan dan disusun semula oleh pasukan kejuruteraan komponen XAIPART

Pencarian Berhubungan

ADF4157BCPZ-RL7 ADF4157BCPZ-RL7 datasheet ADF4157BCPZ-RL7 datasheet pdf ADF4157BCPZ-RL7 pinout ADF4157BCPZ-RL7 footprint ADF4157BCPZ-RL7 equivalent ADF4157BCPZ-RL7 replacement ADF4157BCPZ-RL7 cross reference ADF4157BCPZ-RL7 vs ADF4154BCP-REEL Analog Devices ADF4157BCPZ-RL7 ADF4157BCPZ-RL7 6 GHz fractional-N PLL ADF4157BCPZ-RL7 price ADF4157BCPZ-RL7 stock ADF4157BCPZ-RL7 wireless local oscillator

Komponen dan Tanda berkaitan

Analog Devices ADF4157BCPZ-RL7 ADF4157BCPZ-RL ADF4157BCPZ-R2 ADF4157BCPZ-REEL ADF4154BCP-REEL ADF41020BCPZ-RL7 ADF4108BCPZ-RL7 fractional-N frequency synthesizer phase-locked loop PLL clock and timing IC frequency synthesizer sigma-delta fractional interpolator phase-frequency detector charge pump programmable reference divider lock detect 3-wire serial interface 6 GHz RF bandwidth 25-bit fixed modulus sub-hertz frequency resolution 20-lead LFCSP exposed pad surface-mount semiconductor
RFRC Saring Pantas
Isikan butiran lengkap — pasukan jualan kami akan bertindak balas dalam masa 24 jam
Nombor Bahagian Pengeluar Pakej QTY Harga Target Lengkap
✓
Pesan diskon sudah disubmit!

Kami akan bertindak balas kepada emel anda dalam tempoh 24 jam

1
RFQ Diserahkan
2
kutipan Diterima
3
Order Dipesan
4
Pembayaran
5
Dihantar
6
Diantar
Lihat Perincian RFQ