ADS7800KP - 12-Bit 333ksps SAR ADC | Texas Instruments
MPN: ADS7800KP ✓ AktifADS7800KP Ringkasan
An ADC is an analog-to-digital converter, a semiconductor that samples a continuous analog voltage and converts it into a numeric code for digital processing. The ADS7800 belongs to the successive-approximation ADC family, where a comparator and successive internal trials determine the most significant bits of each conversion. This architecture is positioned between lower-speed high-resolution converters and much faster flash converters, making it suitable for industrial measurement, instrumentation, and control systems that require moderate bandwidth and digital-code accuracy.
The ADS7800KP provides a 12-bit conversion resolution, one analog input channel, parallel output, and a maximum sampling rate of 333 ksps. Its 24-pin PDIP package is also available in plastic or side-braze hermetic 0.3-inch-wide DIP formats, alongside an SOIC option within the ADS7800 family. Two grades based on linearity and dynamic performance allow engineers to optimize the converter for either precision-oriented or throughput-oriented designs.
The external operating supplies are important to the converter architecture: a +5 V supply and either a -12 V or -15 V supply are required. These rails provide the operating conditions for bipolar analog input handling and internal converter circuitry. Because the ADS7800KP uses a parallel interface, its 12 output lines should be routed directly to the acquiring digital system or latched appropriately when multiple devices share a bus.
Typical applications include industrial process measurement, laboratory instrumentation, digital voltmeters, panel meters, control systems, and embedded acquisition modules. The 333 ksps conversion rate permits sampling of rapidly changing analog conditions, while 12-bit resolution provides 4096 output codes and is appropriate for many measurement and monitoring tasks.
Layout is critical for high-resolution conversion systems. Place bypass capacitors close to the supply pins, keep analog input traces short, isolate the analog input from switching-node and high-current return paths, and use a stable reference source with short ground connections. The +5 V, -12 V, and -15 V rails should be decoupled according to the manufacturer’s application guidance to minimize supply ripple and code instability.
This page consolidates the verified device identity, package information, operating requirements, sourcing details, and practical design guidance for engineers evaluating the ADS7800KP. It also distinguishes directly relevant ADS7800 family alternatives from broader ADC options so footprint, channel count, resolution, and supply requirements can be checked before any replacement is considered.
Pilihan pengganti yang segera untuk ADS7800KP — sama paket, pin-pin kompatibel. Bahagian paket yang berbeza memerlukan kerja ulang PCB diasingkan.
Varietas dalam siri ini
Model serupa yang kompatibel dengan pengganti yang segera ADS7800KP (sama faktor bentuk dan kaki) — berbeza dalam Number of Input Channels, Number of Terminals, Resolution, Sampling Rate.
ADS7800AH
✅ Masuk Drop-In📋 Alternatif rujukan (tidak dalam katalog)
ADS7800KP-BI
✅ Masuk Drop-In📋 Alternatif rujukan (tidak dalam katalog)
ADS7800KP Penilaian maksimum & Ciri-ciri Elektrik
| Converter Type | Successive-approximation ADC |
| Pemecahkatan | 12 bit |
| Number of Input Channels | 1 channel |
| kadar sampling | 333 ksps |
| Output Interface | 12-bit parallel |
| Positive Supply Voltage | +5 V |
| Negative Supply Voltage | -12 V or -15 V |
| Kemasan | 24-pin PDIP |
| Package Width | 0.3 inch |
| Package Variants in ADS7800 Family | Plastic PDIP, side-braze hermetic PDIP, and SOIC |
| Performance Grades | 2 linearity and dynamic-performance grades |
| Jenis Pemasangan | Through-hole |
| Number of Terminals | 24 terminals |
Panduan Konfigurasi Pin ADS7800KP plastic pdip, side-braze hermetic pdip, and soic
Konfigurasi pin untuk ADS7800KP (plastic pdip, side-braze hermetic pdip, and soic pakai). Komponen analog ini mempunyai pin masukan, keluaran, dan kuasa. Rujuk dokumen pengeluar untuk konfigurasi pengecualian, pemulihan, dan pin aktifkan. Ideal untuk pengawasan isyarat dan litar pengukur.
Tiada data garisan pin yang diperoleh untuk ADS7800KP.
Rujuk kepada lembaran data untuk konfigurasi pin penuh.
Aplikasi Biasa
ADS7800KP patut untuk 6 aplikasis: Industrial Process Measurement, Laboratory Digital Instrumentation, Digital Voltmeter and Panel Meter, Control-System Data Acquisition, Waveform Monitoring System, Embedded Sensor Interface.
Industrial Process Measurement
The ADS7800KP fits industrial process-measurement front ends that require 12-bit resolution, a 333 ksps sampling rate, and direct parallel acquisition. Its 12-bit output provides 4,096 codes for representing a conditioned sensor signal, while the single-channel architecture suits one measurement loop per converter. The device requires a +5 V rail plus either -12 V or -15 V, so the controller board must accommodate three supply domains. Place the converter close to the analog input network, use a low-noise reference, and keep switching-node energy outside the sensitive return path.
Disebarkan
Laboratory Digital Instrumentation
The ADS7800KP is appropriate for laboratory instruments that sample a conditioned analog input and transfer the 12-bit result to a controller. Its 333 ksps rate supports measurements that change over time, while the parallel output can connect directly to an FPGA or be registered before a microcontroller reads it. The converter’s +5 V, -12 V, or -15 V operating arrangement requires a carefully designed laboratory power tree. Accurate results also depend on selecting the appropriate linearity grade, separating analog and digital returns, and providing stable reference and bypass connections.
Disebarkan
Digital Voltmeter and Panel Meter
A digital voltmeter can use the ADS7800KP to digitize a conditioned, bounded input voltage and produce a numerical result through its 12-bit parallel interface. The 333 ksps capability permits rapid updates when the meter must display changing readings rather than a static measurement. Because the converter also requires a negative supply, the analog front end should define the actual bipolar input range and provide suitable protection and scaling. Reference accuracy, input conditioning, calibration, and the selected converter grade will set the final measurement uncertainty.
Disebarkan
Control-System Data Acquisition
The ADS7800KP can serve as the measurement element in a feedback or monitoring system that reads one analog channel at a relatively high sampling rate. Its 12-bit parallel result supports fast acquisition into digital logic, and the 333 ksps specification provides temporal resolution for control loops or waveform observation. The design should synchronize conversion control with data capture, avoid contention if the bus is shared, and account for propagation delays. Stable supplies, a low-noise reference, and short analog traces are as important as converter selection for repeatable closed-loop behavior.
Disebarkan
Waveform Monitoring System
The ADS7800KP can capture samples from an analog waveform conditioner when 12-bit resolution and 333 ksps performance are sufficient for the monitored signal. Its parallel output allows a high-speed FPGA to timestamp and store each conversion code. The system should establish the allowable input bandwidth with an anti-alias filter and verify conversion timing against the controller clock. Because the ADS7800KP requires +5 V and a negative rail, the acquisition board must supply both domains and maintain clean references. Careful grounding prevents digital acquisition activity from appearing as input noise.
Disebarkan
Embedded Sensor Interface
The ADS7800KP can digitize the output of a suitable sensor amplifier or instrumentation stage in an embedded monitoring product. A 12-bit code provides adequate resolution for many position, level, temperature, and condition signals, and 333 ksps allows the host to sample more frequently than a slow display requires. The sensor front end must keep its output inside the converter’s supported input range and must not exceed the electrical limits for transient inputs. Use local decoupling, a stable reference, and a quiet analog return path to prevent the digital interface from degrading sensor accuracy.
Disebarkan
Ringkasan Produk Disebarkan
Data referensi kejuruteraan untuk ADS7800KP — perbandingan, panduan rancangan, dan maklumat kesediaan
Panduan Pilihan
Perbandingan dengan Gantian
| Parametr | Produk Ini | ADS7800AH | ADS7800KP-BI |
|---|---|---|---|
| Brand | Texas Instruments | Texas Instruments | Texas Instruments |
| Package | 24-pin PDIP | 24-pin PDIP, side-braze hermetic | 24-pin PDIP |
| Resolution | 12 bit | 12 bit | 12 bit |
| Input Channels | 1 channel | 1 channel | 1 channel |
| Conversion Architecture | Successive approximation | Successive approximation | Successive approximation |
| Maximum Sampling Rate | 333 ksps | 333 ksps | 333 ksps |
| Output Interface | 12-bit parallel | 12-bit parallel | 12-bit parallel |
| Positive Supply Voltage | +5 V | +5 V | +5 V |
| Negative Supply Voltage | -12 V or -15 V | -12 V or -15 V | -12 V or -15 V |
| Performance Grades | Two grades available in ADS7800 family | Hermetic family grade | Commercial-temperature designation |
Penyeberangsung Jelas
- Combines 12-bit resolution with a 333 ksps sampling rate (vsADS7800AH)
- Provides a direct 12-bit parallel acquisition interface (vsADS7800KP-BI)
- Uses an established through-hole 24-pin PDIP footprint (vsADS7800AH)
Catatan Desain
The ADS7800KP requires a +5 V supply and either a -12 V or -15 V negative supply. Place local bypass capacitors next to the relevant power pins and keep their return paths short. Check startup sequencing and ensure the negative rail remains within its specified operating range. Do not substitute a grounded supply connection for the required negative rail, because doing so changes the converter’s operating conditions and can invalidate measurement results.
Route the analog input and reference connections away from digital output clocks, switching converters, and high-current return paths. Use a continuous ground plane where practical and keep the reference return compact. The 12-bit parallel outputs can switch simultaneously, so their current transients should not share the sensitive analog return segment. Confirm the physical pin-1 orientation and every signal assignment against the manufacturer pin-description table before fabrication.
Treat the 12-bit output as a synchronous bus: establish valid conversion timing, account for output propagation delay, and avoid contention when multiple converters share a receiving device. In an FPGA implementation, use the control timing from the manufacturer interface description and validate the setup and hold requirements at the selected system clock. External latches can reduce bus complexity when the controller has too few parallel input pins.
Mechanical package similarity does not establish drop-in compatibility for ADS7800 family ordering codes. Before approving ADS7800AH or ADS7800KP-BI, compare the numbered pin definitions, input range, reference configuration, supply sequence, conversion timing, linearity grade, temperature range, and environmental requirements. A substitution should also be tested at the system’s highest expected input frequency and reference voltage to reveal code instability that a basic continuity check cannot detect.
Maklumat Kesediaan
Compliance declarations were not stated in the available manufacturer and distributor listings. Confirm RoHS, REACH, lead-free, halogen-free, conflict-minerals, and automotive qualification status for the exact ordering code before releasing a compliance-controlled design.