Texas Instruments

ADS7846AE - 12-Bit Capacitive Touch Controller | TI

MPN: ADS7846AE ✓ Aktif
16-pin TSSOP Package
MOQ: 1 |

ADS7846AE Ringkasan

The Texas Instruments ADS7846AE is a 12-bit, 4-wire capacitive touch-screen controller with Microwire, QSPI, and SPI interfaces, housed in a 16-pin TSSOP package. It is designed to digitize touch-panel input and transfer converted coordinate data to an embedded host controller. The interface architecture supports both dedicated touch applications and systems requiring flexible serial connectivity.

A capacitive touch-screen controller is an interface IC that converts changes in capacitance caused by a user's touch into digital position and pressure-related measurements. Within the broader semiconductor hierarchy, the ADS7846 belongs to the touchscreen-controller class, then to interface ICs, and ultimately to integrated circuits used in human-machine interface electronics.

The ADS7846AE provides a 12-bit conversion interface for a 4-wire capacitive panel and supports Microwire, QSPI, and SPI communication. Its 16-pin TSSOP package supports compact PCB layouts in embedded equipment. Because capacitive sensing is sensitive to panel geometry, grounding, shielding, and noise, successful implementation depends on matching the controller to the panel characteristics and following the manufacturer's interface and layout guidance.

The controller is suitable for industrial panels, handheld terminals, point-of-sale equipment, medical interfaces, and consumer appliances with capacitive touch input. It can serve systems that need a straightforward serial touchscreen front end while retaining host-controlled configuration and data transfer.

In a typical design, the touch panel connects to the controller's analog sensing inputs, while the host processor communicates through a serial interface. Keep sensing traces short, isolate them from noisy switching nodes, provide a clean reference and supply arrangement, and verify the design against the manufacturer's pin-description table and application guidance.

This page combines the exact ADS7846AE device identification, interface and package information, application guidance, comparison structure, and practical implementation notes to support faster engineering evaluation and sourcing decisions.

Pilihan pengganti yang segera untuk ADS7846AE — sama paket, pin-pin kompatibel. Bahagian paket yang berbeza memerlukan kerja ulang PCB diasingkan.

Varietas dalam siri ini

Model serupa yang kompatibel dengan pengganti yang segera ADS7846AE (sama faktor bentuk dan kaki) — berbeza dalam Package, Serial Interface.

Texas Instruments
Package: 16-pin SSOP
Serial Interface: Synchronous serial interface
Bandingkan Dengan ADS7846AE →

ADS7843E

✅ Masuk Drop-In
Texas Instruments
📦 16-pin TSSOP
12 bit · 125 kHz · 750 uW at 125 kHz throughput and 2.7 V supply · 2.7 V single supply · 1 V to VCC · 0 V to VREF · Ratiometric · 4-wire resistive touch screen

Hubungi untuk harga

Lihat Datasheet →

ADS7846AE Spesifikasi

Device Type 4-wire capacitive touchscreen controller
Pemecahkatan 12 bit
Serial Interface Microwire, QSPI, SPI
Kemasan 16-pin TSSOP
Touch Panel Type 4-wire capacitive
Digital Output Interface Microwire, QSPI, SPI
Jenis Pemasangan Surface mount

Panduan Konfigurasi Pin ADS7846AE 16-pin tssop

Konfigurasi pin untuk ADS7846AE (16-pin tssop pakai). Penomeran pin, fungsi, dan garis bentuk koneksi ditakrifkan dalam dokumen pengeluar. Rujuk dokumen untuk kebentuk dan pedoman pengasman.

Garis bentuk pengecah pakai 16-pin tssop untuk ADS7846AE

Tiada data garisan pin yang diperoleh untuk ADS7846AE.

Rujuk kepada lembaran data untuk konfigurasi pin penuh.

Aplikasi Biasa

ADS7846AE patut untuk 6 aplikasis: Industrial Touchscreen Terminal, Point-of-Sale Terminal, Medical Device Interface, Handheld Test Instrument, Smart Home Control Panel, Consumer Appliance Control.

🏭

Industrial Touchscreen Terminal

The ADS7846AE fits an industrial terminal that uses a 4-wire capacitive panel and communicates through QSPI or SPI. Its 12-bit conversion provides 4,096 digital result codes for host-side position processing, while the 16-pin TSSOP package supports compact controller placement. The host can configure acquisition timing and interpret touch coordinates while the panel interface handles analog sensing. Panel geometry, grounding, and environmental noise remain critical because the controller does not remove errors caused by an unsuitable electrode layout. Use the manufacturer pin-description table and application guidance to route sensing, reference, supply, and serial signals, then validate touch repeatability and immunity under the enclosure conditions expected in service.

🖥️

Point-of-Sale Terminal

The ADS7846AE is appropriate for a point-of-sale terminal requiring a capacitive touch panel and a compact serial interface. The 12-bit controller converts panel activity into digital measurements, while Microwire, QSPI, or SPI connectivity lets the application processor handle calibration, coordinate mapping, and operator input. Its 16-pin TSSOP footprint can simplify routing into a space-constrained control board. A successful design must separate touchscreen traces from switching power and display signals because capacitive sensing can couple small analog changes into the acquisition path. Use solid grounding and follow the manufacturer's reference-layout practices, then test the assembled panel with its final glass, adhesive, bezel, and cable arrangement.

💊

Medical Device Interface

The ADS7846AE can support capacitive user interfaces in medical equipment where a compact 4-wire panel controller is needed. Its 12-bit conversion creates 4,096 possible digital codes for coordinate processing, and the serial interface allows a central embedded controller to manage calibration and user actions. The device must still be evaluated against the complete medical system requirements, including supply levels, temperature range, ESD exposure, panel behavior, and applicable product standards. Keep sensing traces short and isolated from high-energy circuits, and validate input performance with the final touchscreen material and enclosure. For safety-related workflows, add appropriate system-level fault monitoring rather than assuming touchscreen resolution alone guarantees suitable usability.

🔧

Handheld Test Instrument

The ADS7846AE is suitable for a handheld test instrument that combines a capacitive display surface with embedded measurement hardware. Its 12-bit conversion supports host-side mapping of touch position, and the compact 16-pin TSSOP package leaves board area for analog and digital instrumentation. QSPI, SPI, or Microwire operation allows selection according to the host processor's peripheral resources. The layout should keep the touchscreen interface away from high-impedance measurement nodes and switching converters, since capacitive sensing performance can be degraded by coupling and unstable references. Validate the touch controller with the final display stack and cable, and confirm acquisition behavior across the complete battery and operating-temperature ranges required by the instrument.

🧩

Smart Home Control Panel

The ADS7846AE can provide the capacitive sensing front end for a wall-mounted smart-home control panel. The 12-bit interface supports coordinate detection, while QSPI, SPI, or Microwire communication allows connection to a host that handles icons, configuration, and network functions. Its 16-pin TSSOP package is practical for a compact controller board behind a glass front panel. Designers should account for panel length, electrode geometry, bezel spacing, and grounding because those physical properties determine usable sensing performance. Keep the touch traces compact and away from AC-related switching nodes, and test the complete front assembly rather than only a bare controller board. Firmware should also handle calibration persistence and touch-edge behavior.

📱

Consumer Appliance Control

The ADS7846AE supports consumer appliances that use a sealed capacitive control surface instead of mechanical buttons. The 12-bit controller produces digital measurements for a host microcontroller, and the 16-pin TSSOP package supports economical surface-mount assembly. Microwire, QSPI, and SPI options provide design flexibility across embedded platforms. A sealed front panel can improve appearance and durability, but its glass, adhesive, and printed electrode stack must be included in validation because these materials affect capacitive coupling and noise. Keep sensing paths short, provide a stable reference and supply arrangement, and avoid routing them alongside motors, relays, or power-conversion switches. Final acceptance testing should include touch response at temperature extremes and with the production enclosure fitted.

Ringkasan Produk Disebarkan

ADS7846 Base touchscreen-controller family Dipergunakan di: Industrial Touchscreen Terminal, Point-of-Sale Terminal, Medical Device Interface, Handheld Test Instrument, Smart Home Control Panel, Consumer Appliance Control ADS7846E Texas Instruments Dipergunakan di: Industrial Touchscreen Terminal, Point-of-Sale Terminal, Medical Device Interface, Handheld Test Instrument, Smart Home Control Panel, Consumer Appliance Control
What is the ADS7846AE?
The ADS7846AE is a Texas Instruments 12-bit, 4-wire capacitive touch-screen controller in a 16-pin TSSOP package. According to the manufacturer product page and product listing, it supports Microwire, QSPI, and SPI serial interfaces. The device converts capacitive-panel measurements into digital data for an embedded host and is intended for compact capacitive human-interface designs.
What interface does the ADS7846AE use?
The ADS7846AE supports Microwire, QSPI, and SPI interfaces. According to the Texas Instruments product listing, all three serial interface options are associated with this exact 16-pin TSSOP device. This flexibility allows the controller to connect to host processors whose peripheral architecture supports either a dedicated touch interface or a general-purpose synchronous serial controller.
What is the resolution of the ADS7846AE?
The ADS7846AE provides a 12-bit conversion resolution. According to the Texas Instruments product listing, this resolution applies to the exact capacitive touchscreen-controller variant. In a system design, the 12-bit result represents 4,096 possible digital codes, although the useful position accuracy also depends on panel size, electrode geometry, calibration, and touch-location distribution.
What type of touchscreen does ADS7846AE support?
The ADS7846AE supports a 4-wire capacitive touchscreen. According to the Texas Instruments product page, ADS7846 is a 4-wire touch-screen controller, and the exact ADS7846AE listing identifies the capacitive configuration. The controller is therefore not interchangeable with the ADS7846E resistive-touch variant without accounting for panel sensing and interface differences.
Where can I download the ADS7846AE datasheet PDF?
The official ADS7846 documentation is available from the Texas Instruments product page at https://www.ti.com/product/ADS7846. Open the Technical Information section and select the ADS7846 datasheet document. Use that manufacturer document for the complete electrical tables, pin descriptions, register map, timing diagrams, and application circuit because those details are essential for final PCB and firmware design.
Where can I find the ADS7846AE pinout?
The ADS7846AE pinout is found in the pin-description section of the official Texas Instruments ADS7846 datasheet. The device uses a 16-pin TSSOP package, so verify all 16 terminal assignments against the ordering-information table before routing the PCB. Use the manufacturer pin-description table rather than inferring analog, serial, supply, or ground functions from another package variant.
Is ADS7846E the same as ADS7846AE?
No. The ADS7846AE is a 4-wire capacitive touchscreen controller in a 16-pin TSSOP package, while the ADS7846E listing identifies a 4-wire resistive touchscreen controller in a 16-pin SSOP package. Because the sensing technology and package designation differ, ADS7846E is not a drop-in replacement for ADS7846AE without a package redesign and control-interface validation.
What is the best drop-in replacement for ADS7846AE?
No confirmed drop-in replacement is identified for the ADS7846AE. The cross-reference search identifies potential manufacturers but does not name a candidate that is verified as pin-to-pin compatible in the same 16-pin TSSOP package. Treat any proposed substitute as a redesign candidate until its pin assignments, capacitive sensing method, serial protocol, voltage ratings, and timing are checked against the official ADS7846 documentation.
Can an Analog Devices controller replace the ADS7846AE?
An Analog Devices controller cannot be confirmed as a direct ADS7846AE replacement without a specific verified MPN and footprint match. The cross-reference result names Analog Devices as a possible source, but it does not establish that a candidate uses the same 16-pin TSSOP pinout and 4-wire capacitive sensing interface. Request the exact candidate MPN, then compare its pinout and electrical behavior before considering a replacement.
When should I choose ADS7846AE over another touchscreen controller?
Choose the ADS7846AE when the design specifically requires a 12-bit, 4-wire capacitive touchscreen controller with Microwire, QSPI, or SPI connectivity in a 16-pin TSSOP package. Consider another controller if the panel is resistive, the interface is I2C, or the required voltage, sampling, environmental, and qualification specifications differ. This selection avoids mismatching the sensing technology to the panel.
Is ADS7846AE suitable for industrial touch panels?
The ADS7846AE is suitable for industrial touch-panel designs when its electrical limits and environmental ratings support the deployment. Its confirmed capabilities include 12-bit conversion, 4-wire capacitive sensing, three serial-interface options, and a 16-pin TSSOP package. Confirm operating temperature, supply voltage, ESD performance, panel compatibility, and industrial qualification requirements in the manufacturer datasheet before release.
Where can I buy ADS7846AE online?
Use the Request a Quote form on this page to request ADS7846AE availability, current pricing, minimum order quantity, and lead time. The form allows a purchasing team to request the exact 16-pin TSSOP capacitive touchscreen-controller MPN without relying on a generic family listing. Confirm the returned manufacturer part number, package suffix, packaging format, and delivery terms before placing an order.
What is the price of ADS7846AE?
Use the Request a Quote form on this page to obtain the current ADS7846AE quotation. The quote should be requested for the exact 12-bit, 4-wire capacitive, 16-pin TSSOP device so that package, packing, order quantity, and delivery requirements are unambiguous. Pricing can change with quantity and market conditions, so request a current quotation for production planning.
What is the lead time for ADS7846AE?
Request the current ADS7846AE lead time through the Request a Quote form on this page. Include your required quantity, standard packaging, target shipment date, and approved manufacturing location. The manufacturer product page identifies the device family, but a production lead-time commitment should be confirmed for the exact order configuration before it enters the project schedule.
Is ADS7846AE in stock?
Request ADS7846AE stock status through the Request a Quote form on this page. Provide the required quantity and packaging preference so the response can reflect the exact order rather than an unconfirmed inventory estimate. For production planning, request a dated availability update and lead time together, and account for normal semiconductor procurement and assembly scheduling requirements.
What are the key specifications of ADS7846AE that engineers should know?
The key ADS7846AE specifications are 12-bit conversion resolution, 4-wire capacitive touch-panel support, Microwire, QSPI, and SPI interfaces, and a 16-pin TSSOP package. According to the Texas Instruments product page and listing, these attributes define the exact capacitive controller selected here. Supply levels, sampling rate, operating temperature, and electrical limits must be confirmed in the official datasheet.
What can replace the ADS7846AE?
A confirmed pin-to-pin replacement for the ADS7846AE has not been established. Cross-reference results identify Analog Devices and Maxim as possible manufacturers, but they do not provide verified MPNs that match the ADS7846AE's 16-pin TSSOP footprint, 4-wire capacitive sensing, and serial protocols. For a replacement project, obtain specific candidate MPNs and compare their pin assignments and electrical specifications before approving a board change.

Data referensi kejuruteraan untuk ADS7846AE — perbandingan, panduan rancangan, dan maklumat kesediaan

Panduan Pilihan

Choose the ADS7846AE for a design that specifically requires a 12-bit, 4-wire capacitive touchscreen controller in a 16-pin TSSOP package and uses Microwire, QSPI, or SPI. Do not select the ADS7846E as a substitute because it is listed for resistive sensing in a 16-SSOP package, which requires different panel excitation and PCB considerations. For an I2C-based system, a different controller family may be more appropriate. When evaluating any replacement, verify the pin assignment, supply range, serial timing, panel configuration, acquisition performance, environmental limits, and package drawing. If no candidate satisfies all of those conditions, retain the ADS7846AE design rather than forcing a nominal functional equivalent onto the existing board.

Perbandingan dengan Gantian

Parametr Produk Ini
Brand Texas Instruments
Package 16-pin TSSOP
Touch Panel Type 4-wire capacitive
Resolution 12 bit
Serial Interface Microwire, QSPI, SPI
Interface Type Touchscreen controller
Mounting Type Surface mount
Related ADS7846E Sensing 4-wire capacitive 4-wire resistive; 16-SSOP; not a drop-in replacement

Penyeberangsung Jelas

  • Dedicated capacitive sensing configuration (vsADS7846E)
  • Three serial-interface choices (vsADS7846E)
  • 12-bit conversion resolution (vsADS7846E)

Catatan Desain

Route the capacitive sensing connections as short, quiet traces and keep them away from switching nodes, relay drivers, high-current returns, and display timing signals. Use the manufacturer's pin-description table to identify every analog sensing terminal, and verify the recommended grounding and reference arrangement on the final schematic. Panel electrodes, protective glass, adhesive, bezel geometry, and enclosure materials all influence the measured capacitance, so validation must use the production mechanical stack.

Treat analog sensing, reference, and serial signals as separate functional groups during layout. Keep ground-return paths continuous and avoid sharing narrow current paths between the touchscreen controller and noisy peripherals. Confirm signal levels, serial timing, and acquisition behavior from the manufacturer datasheet before selecting a host interface. After schematic review, inspect the assembled PCB for accidental coupling and test touch performance with the final panel rather than a loose test sensor.

Do not substitute the ADS7846E for the ADS7846AE: the listed sensing technologies are resistive versus capacitive, and the package descriptions are 16-SSOP versus 16-pin TSSOP. Also avoid designing around an unnamed cross-reference candidate. A valid replacement must have a confirmed pin-to-pin mapping, compatible supply and signal levels, matching panel excitation method, and equivalent serial timing. Otherwise, budget the change as a PCB and firmware redesign rather than a drop-in interchange.

Maklumat Kesediaan

RoHS
Unknown
REACH
Unknown
AEC-Q100
Unknown
Bosong logam timbal
Unknown
Bosong halogen
Unknown
Mineral konflik
Unknown

No specific RoHS, REACH, AEC-Q100, lead-free, halogen-free, or conflict-minerals status is stated for the exact ADS7846AE listing.

Data disahkan pada: 2026-11-09 — data yang disahkan dan disusun semula oleh pasukan kejuruteraan komponen XAIPART

Pencarian Berhubungan

ads7846 touchscreen ADS7846AE datasheet ADS7846AE pinout ADS7846AE datasheet pdf ADS7846AE 16 TSSOP ADS7846AE 12 bit ADS7846AE capacitive controller ADS7846AE SPI interface ADS7846AE equivalent ADS7846AE replacement ADS7846AE price Texas Instruments ADS7846AE ADS7846AE application circuit

Komponen dan Tanda berkaitan

Texas Instruments ADS7846 ADS7846AE ADS7846E 12-bit touchscreen controller 4-wire capacitive touchscreen 4-wire resistive touchscreen Microwire QSPI SPI interface IC integrated circuit semiconductor 16-pin TSSOP TSSOP package surface-mount package capacitive touch sensing touchscreen digitization industrial control panel point-of-sale terminal medical device interface smart-home control panel consumer appliance control embedded host controller
RFRC Saring Pantas
Isikan butiran lengkap — pasukan jualan kami akan bertindak balas dalam masa 24 jam
Nombor Bahagian Pengeluar Pakej QTY Harga Target Lengkap
✓
Pesan diskon sudah disubmit!

Kami akan bertindak balas kepada emel anda dalam tempoh 24 jam

1
RFQ Diserahkan
2
kutipan Diterima
3
Order Dipesan
4
Pembayaran
5
Dihantar
6
Diantar
Lihat Perincian RFQ